/// <summary>
/// Shows the IFC export setup window when clicking the buttonEditSetup.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="args">Event arguments that contains the event data.</param>
private void buttonEditSetup_Click(object sender, RoutedEventArgs args)
{
IFCExportConfiguration selectedConfig = GetSelectedConfiguration();
IFCExportConfigurationsMap configurationsMap = new IFCExportConfigurationsMap(m_configMap);
IFCExporterUIWindow editorWindow = new IFCExporterUIWindow(configurationsMap, selectedConfig.Name);
// the SelectionChanged event will be temporary disabled when the Modify Config Window is active
// (it is particularly useful for COBie v2.4 setup to avoid the function is called repeatedly)
currentSelectedSetup.SelectionChanged -= currentSelectedSetup_SelectionChanged;
editorWindow.Owner = this;
bool?ret = editorWindow.ShowDialog();
if (ret.HasValue)
{
m_EditConfigVisited = ret.Value;
}
if (editorWindow.DialogResult.HasValue && editorWindow.DialogResult.Value)
{
// Check here for changes in configurations. If changed, the changes will be saved into the storage
configurationsMap.UpdateSavedConfigurations(m_configMap);
currentSelectedSetup.Items.Clear();
m_configMap = configurationsMap;
string selectedConfigName = editorWindow.GetSelectedConfigurationName();
UpdateCurrentSelectedSetupCombo(selectedConfigName);
updateFileName();
}
// The SelectionChanged event will be activated again after the Modify Config Window is closed
currentSelectedSetup.SelectionChanged += currentSelectedSetup_SelectionChanged;
}
private void UpdatePhaseAttributes(IFCExportConfiguration configuration)
{
if (configuration.VisibleElementsOfCurrentView)
{
UIDocument uiDoc = new UIDocument(IFCCommandOverrideApplication.TheDocument);
Parameter currPhase = uiDoc.ActiveView.get_Parameter(BuiltInParameter.VIEW_PHASE);
if (currPhase != null)
{
configuration.ActivePhaseId = currPhase.AsElementId();
}
else
{
configuration.ActivePhaseId = ElementId.InvalidElementId;
}
}
if (!IFCPhaseAttributes.Validate(configuration.ActivePhaseId))
{
configuration.ActivePhaseId = ElementId.InvalidElementId;
}
foreach (IFCPhaseAttributes attribute in comboboxActivePhase.Items.Cast <IFCPhaseAttributes>())
{
if (configuration.ActivePhaseId == attribute.PhaseId)
{
comboboxActivePhase.SelectedItem = attribute;
break;
}
}
comboboxActivePhase.IsEnabled = !configuration.VisibleElementsOfCurrentView;
}
private void comboBoxLOD_SelectionChanged(object sender, RoutedEventArgs e)
{
string selectedItem = (string)comboBoxLOD.SelectedItem;
IFCExportConfiguration configuration = GetSelectedConfiguration();
if (configuration != null)
{
double levelOfDetail = 0;
if (string.Compare(selectedItem, Properties.Resources.DetailLevelExtraLow) == 0)
{
levelOfDetail = 0.25;
}
else if (string.Compare(selectedItem, Properties.Resources.DetailLevelLow) == 0)
{
levelOfDetail = 0.5;
}
else if (string.Compare(selectedItem, Properties.Resources.DetailLevelMedium) == 0)
{
levelOfDetail = 0.75;
}
else
{
// detail level is high
levelOfDetail = 1;
}
configuration.TessellationLevelOfDetail = levelOfDetail;
}
}
/// <summary>
/// Shows the IFC export setup window when clicking the buttonEditSetup.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="args">Event arguments that contains the event data.</param>
private void buttonEditSetup_Click(object sender, RoutedEventArgs args)
{
IFCExportConfiguration selectedConfig = GetSelectedConfiguration();
IFCExportConfigurationsMap configurationsMap = new IFCExportConfigurationsMap(m_configMap);
IFCExporterUIWindow editorWindow = new IFCExporterUIWindow(configurationsMap, selectedConfig.Name);
// the SelectionChanged event will be temporary disabled when the Modify Config Window is active
// (it is particularly useful for COBie v2.4 setup to avoid the function is called repeatedly)
currentSelectedSetup.SelectionChanged -= currentSelectedSetup_SelectionChanged;
editorWindow.ShowDialog();
if (editorWindow.DialogResult.HasValue && editorWindow.DialogResult.Value)
{
IFCCommandOverrideApplication.PotentiallyUpdatedConfigurations = true;
currentSelectedSetup.Items.Clear();
m_configMap = configurationsMap;
String selectedConfigName = editorWindow.GetSelectedConfigurationName();
UpdateCurrentSelectedSetupCombo(selectedConfigName);
updateFileName();
}
// The SelectionChanged event will be activated again after the Modify Config Window is closed
currentSelectedSetup.SelectionChanged += currentSelectedSetup_SelectionChanged;
}
/// <summary>
/// Gets the file filters for save dialog.
/// </summary>
/// <returns>The file filter.</returns>
public String GetFileFilter()
{
IFCExportConfiguration selectedConfig = GetSelectedConfiguration();
IFCFileFormatAttributes selectedItem = new IFCFileFormatAttributes(selectedConfig.IFCFileType);
return(selectedItem.GetFileFilter());
}
/// <summary>
/// Updates the description when current configuration change.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="args">Event arguments that contains the event data.</param>
private void currentSelectedSetup_SelectionChanged(object sender, SelectionChangedEventArgs args)
{
IFCExportConfiguration selectedConfig = GetSelectedConfiguration();
if (selectedConfig != null)
{
if (!IFCPhaseAttributes.Validate(selectedConfig.ActivePhaseId))
{
selectedConfig.ActivePhaseId = ElementId.InvalidElementId;
}
// Display the IFC Version
textBoxSetupDescription.Text = selectedConfig.FileVersionDescription;
IFCExportConfiguration prevConfig = null;
if (args.RemovedItems.Count > 0)
{
prevConfig = m_configMap[args.RemovedItems[0].ToString()];
}
//if (GetSelectedConfiguration().IFCVersion == IFCVersion.IFC2x3FM && (prevConfig == null || prevConfig.IFCVersion != IFCVersion.IFC2x3FM))
//{
//// For COBie, we will always pop up the configuration window to make sure all items are initialized and user update them if necessary
//buttonEditSetup_Click(sender, args);
//}
}
}
/// <summary>
/// Creates a builtIn configuration by particular options.
/// </summary>
/// <param name="name">The configuration name.</param>
/// <param name="ifcVersion">The IFCVersion.</param>
/// <param name="spaceBoundaries">The space boundary level.</param>
/// <param name="exportBaseQuantities">The ExportBaseQuantities.</param>
/// <param name="splitWalls">The SplitWallsAndColumns.</param>
/// <param name="internalSets">The ExportInternalRevitPropertySets.</param>
/// <param name="PlanElems2D">The Export2DElements.</param>
/// <returns>The builtIn configuration.</returns>
public static IFCExportConfiguration CreateBuiltInConfiguration(string name,
IFCVersion ifcVersion,
int spaceBoundaries,
bool exportBaseQuantities,
bool splitWalls,
bool internalSets,
bool PlanElems2D)
{
IFCExportConfiguration configuration = new IFCExportConfiguration();
configuration.Name = name;
configuration.IFCVersion = ifcVersion;
configuration.IFCFileType = IFCFileFormat.Ifc;
configuration.SpaceBoundaries = spaceBoundaries;
configuration.ExportBaseQuantities = exportBaseQuantities;
configuration.SplitWallsAndColumns = splitWalls;
configuration.ExportInternalRevitPropertySets = internalSets;
configuration.Export2DElements = PlanElems2D;
configuration.VisibleElementsOfCurrentView = false;
configuration.Use2DRoomBoundaryForVolume = false;
configuration.UseFamilyAndTypeNameForReference = false;
configuration.ExportPartsAsBuildingElements = false;
configuration.m_isBuiltIn = true;
configuration.m_isInSession = false;
return(configuration);
}
/// <summary>
/// Constructs a copy configuration by providing name and defined configuration.
/// </summary>
/// <param name="name">The name of copy configuration.</param>
/// <param name="other">The defined configuration to copy.</param>
private IFCExportConfiguration(String name, IFCExportConfiguration other)
{
this.Name = name;
this.IFCVersion = other.IFCVersion;
this.IFCFileType = other.IFCFileType;
this.SpaceBoundaries = other.SpaceBoundaries;
this.ExportBaseQuantities = other.ExportBaseQuantities;
this.SplitWallsAndColumns = other.SplitWallsAndColumns;
this.ExportInternalRevitPropertySets = other.ExportInternalRevitPropertySets;
this.ExportIFCCommonPropertySets = other.ExportIFCCommonPropertySets;
this.Export2DElements = other.Export2DElements;
this.VisibleElementsOfCurrentView = other.VisibleElementsOfCurrentView;
this.Use2DRoomBoundaryForVolume = other.Use2DRoomBoundaryForVolume;
this.UseFamilyAndTypeNameForReference = other.UseFamilyAndTypeNameForReference;
this.ExportPartsAsBuildingElements = other.ExportPartsAsBuildingElements;
this.ExportBoundingBox = other.ExportBoundingBox;
this.ExportSolidModelRep = other.ExportSolidModelRep;
this.ExportSchedulesAsPsets = other.ExportSchedulesAsPsets;
this.ExportUserDefinedPsets = other.ExportUserDefinedPsets;
this.ExportUserDefinedPsetsFileName = other.ExportUserDefinedPsetsFileName;
this.ExportLinkedFiles = other.ExportLinkedFiles;
this.IncludeSiteElevation = other.IncludeSiteElevation;
this.UseCoarseTessellation = other.UseCoarseTessellation;
this.TessellationLevelOfDetail = other.TessellationLevelOfDetail;
this.ActivePhaseId = other.ActivePhaseId;
this.ExportRoomsInView = other.ExportRoomsInView;
this.m_isBuiltIn = false;
this.m_isInSession = false;
}
/// <summary>
/// Duplicates this configuration by giving a new name.
/// </summary>
/// <param name="newName">The new name of the copy configuration.</param>
/// <returns>The duplicated configuration.</returns>
public IFCExportConfiguration Duplicate(String newName)
{
IFCExportConfiguration dup = Clone();
dup.Name = newName;
return(dup);
}
/// <summary>
/// Adds the saved configuration from document to the map.
/// </summary>
/// <param name="document">The document storing the saved configuration.</param>
public void AddSavedConfigurations(Document document)
{
if (m_schema == null)
{
m_schema = Schema.Lookup(s_schemaId);
}
if (m_schema != null)
{
foreach (DataStorage storedSetup in GetSavedConfigurations(document))
{
Entity configEntity = storedSetup.GetEntity(m_schema);
IFCExportConfiguration configuration = IFCExportConfiguration.CreateDefaultConfiguration();
configuration.Name = configEntity.Get <String>(s_setupName);
//configuration.Description = configEntity.Get<String>(s_setupDescription);
configuration.IFCVersion = (IFCVersion)configEntity.Get <int>(s_setupVersion);
configuration.IFCFileType = (IFCFileFormat)configEntity.Get <int>(s_setupFileFormat);
configuration.SpaceBoundaries = configEntity.Get <int>(s_setupSpaceBoundaries);
configuration.ExportBaseQuantities = configEntity.Get <bool>(s_setupQTO);
configuration.SplitWallsAndColumns = configEntity.Get <bool>(s_splitWallsAndColumns);
configuration.Export2DElements = configEntity.Get <bool>(s_setupExport2D);
configuration.ExportInternalRevitPropertySets = configEntity.Get <bool>(s_setupExportRevitProps);
configuration.Use2DRoomBoundaryForVolume = configEntity.Get <bool>(s_setupUse2DForRoomVolume);
configuration.UseFamilyAndTypeNameForReference = configEntity.Get <bool>(s_setupUseFamilyAndTypeName);
configuration.ExportPartsAsBuildingElements = configEntity.Get <bool>(s_setupExportPartsAsBuildingElements);
Add(configuration);
}
}
}
/// <summary>
/// Sets the dialog result when clicking the Cancel button.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="args">Event arguments that contains the event data.</param>
private void buttonCancel_Click(object sender, RoutedEventArgs args)
{
Result = IFCExportResult.Cancel;
IFCExportConfiguration selectedConfig = GetSelectedConfiguration();
LastSelectedConfig[selectedConfig.Name] = selectedConfig;
Close();
}
/// <summary>
/// Set the in-session configuration to cache.
/// </summary>
/// <param name="configuration">The the in-session configuration.</param>
public static void SetInSession(IFCExportConfiguration configuration)
{
if (!configuration.IsInSession)
{
throw new ArgumentException("SetInSession requires an In-Session configuration", "configuration");
}
s_inSessionConfiguration = configuration;
}
public IFCExportConfiguration Clone()
{
IFCExportConfiguration theClone = (IFCExportConfiguration)this.MemberwiseClone();
theClone.ProjectAddress = this.ProjectAddress.Clone();
theClone.ClassificationSettings = this.ClassificationSettings.Clone();
return(theClone);
}
/// <summary>
/// Gets the new duplicated setup name.
/// </summary>
/// <param name="configuration">The configuration to duplicate.</param>
/// <returns>The new duplicated setup name.</returns>
private String GetDuplicateSetupName(IFCExportConfiguration configuration)
{
if (configuration == null)
{
configuration = GetSelectedConfiguration();
}
return(GetFirstIncrementalName(configuration.Name));
}
/// <summary>
/// Remove a configuration from the listbox and the map.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="e">Event arguments that contains the event data.</param>
private void buttonDeleteSetup_Click(object sender, RoutedEventArgs e)
{
IFCExportConfiguration configuration = (IFCExportConfiguration)listBoxConfigurations.SelectedItem;
m_configurationsMap.Remove(configuration.Name);
listBoxConfigurations.Items.Remove(configuration);
listBoxConfigurations.SelectedIndex = 0;
}
/// <summary>
/// Creates a builtIn configuration by particular options.
/// </summary>
/// <param name="name">The configuration name.</param>
/// <param name="ifcVersion">The IFCVersion.</param>
/// <param name="spaceBoundaries">The space boundary level.</param>
/// <param name="exportBaseQuantities">The ExportBaseQuantities.</param>
/// <param name="splitWalls">The SplitWallsAndColumns option.</param>
/// <param name="internalSets">The ExportInternalRevitPropertySets option.</param>
/// <param name="schedulesAsPSets">The ExportSchedulesAsPsets option.</param>
/// <param name="userDefinedPSets">The ExportUserDefinedPsets option.</param>
/// <param name="PlanElems2D">The Export2DElements option.</param>
/// <param name="exportBoundingBox">The exportBoundingBox option.</param>
/// <param name="exportLinkedFiles">The exportLinkedFiles option.</param>
/// <returns>The builtIn configuration.</returns>
public static IFCExportConfiguration CreateBuiltInConfiguration(string name,
IFCVersion ifcVersion,
int spaceBoundaries,
bool exportBaseQuantities,
bool splitWalls,
bool internalSets,
bool schedulesAsPSets,
bool userDefinedPSets,
bool userDefinedParameterMapping,
bool PlanElems2D,
bool exportBoundingBox,
bool exportLinkedFiles,
string excludeFilter = "",
bool includeSteelElements = false)
{
IFCExportConfiguration configuration = new IFCExportConfiguration();
configuration.Name = name;
configuration.IFCVersion = ifcVersion;
configuration.IFCFileType = IFCFileFormat.Ifc;
configuration.SpaceBoundaries = spaceBoundaries;
configuration.ExportBaseQuantities = exportBaseQuantities;
configuration.SplitWallsAndColumns = splitWalls;
configuration.ExportInternalRevitPropertySets = internalSets;
configuration.ExportIFCCommonPropertySets = true;
configuration.Export2DElements = PlanElems2D;
configuration.VisibleElementsOfCurrentView = false;
configuration.Use2DRoomBoundaryForVolume = false;
configuration.UseFamilyAndTypeNameForReference = false;
configuration.ExportPartsAsBuildingElements = false;
configuration.UseActiveViewGeometry = false;
configuration.ExportSpecificSchedules = false;
configuration.ExportBoundingBox = exportBoundingBox;
configuration.ExportSolidModelRep = false;
configuration.ExportSchedulesAsPsets = schedulesAsPSets;
configuration.ExportUserDefinedPsets = userDefinedPSets;
configuration.ExportUserDefinedPsetsFileName = System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location) + @"\" + name + @".txt";
configuration.ExportUserDefinedParameterMapping = userDefinedParameterMapping;
configuration.ExportUserDefinedParameterMappingFileName = "";
configuration.ExportLinkedFiles = exportLinkedFiles;
configuration.IncludeSiteElevation = false;
// The default tesselationLevelOfDetail will be low
configuration.TessellationLevelOfDetail = 0.5;
configuration.UseOnlyTriangulation = false;
configuration.StoreIFCGUID = false;
configuration.m_isBuiltIn = true;
configuration.m_isInSession = false;
configuration.ActivePhaseId = ElementId.InvalidElementId;
configuration.ExportRoomsInView = false;
configuration.ExcludeFilter = excludeFilter;
configuration.COBieCompanyInfo = "";
configuration.COBieProjectInfo = "";
configuration.IncludeSteelElements = includeSteelElements;
configuration.UseTypeNameOnlyForIfcType = false;
configuration.UseVisibleRevitNameAsEntityName = false;
return(configuration);
}
/// <summary>
/// Creates a builtIn configuration by particular options.
/// </summary>
/// <param name="name">The configuration name.</param>
/// <param name="ifcVersion">The IFCVersion.</param>
/// <param name="spaceBoundaries">The space boundary level.</param>
/// <param name="exportBaseQuantities">The ExportBaseQuantities.</param>
/// <param name="splitWalls">The SplitWallsAndColumns option.</param>
/// <param name="internalSets">The ExportInternalRevitPropertySets option.</param>
/// <param name="schedulesAsPSets">The ExportSchedulesAsPsets option.</param>
/// <param name="userDefinedPSets">The ExportUserDefinedPsets option.</param>
/// <param name="PlanElems2D">The Export2DElements option.</param>
/// <param name="exportBoundingBox">The exportBoundingBox option.</param>
/// <param name="exportLinkedFiles">The exportLinkedFiles option.</param>
/// <returns>The builtIn configuration.</returns>
public static IFCExportConfiguration CreateBuiltInConfiguration(IFCVersion ifcVersion,
int spaceBoundaries,
bool exportBaseQuantities,
bool splitWalls,
bool internalSets,
bool schedulesAsPSets,
bool userDefinedPSets,
bool userDefinedParameterMapping,
bool PlanElems2D,
bool exportBoundingBox,
bool exportLinkedFiles,
string excludeFilter = "",
bool includeSteelElements = false,
KnownERNames exchangeRequirement = KnownERNames.NotDefined,
string customName = null)
{
IFCExportConfiguration configuration = new IFCExportConfiguration();
// Items from General Tab
configuration.Name = string.IsNullOrWhiteSpace(customName) ? ifcVersion.ToLabel() : customName;
if (exchangeRequirement != KnownERNames.NotDefined)
{
configuration.Name = $"{configuration.Name} [{exchangeRequirement.ToShortLabel()}]";
}
configuration.IFCVersion = ifcVersion;
configuration.ExchangeRequirement = exchangeRequirement;
configuration.IFCFileType = IFCFileFormat.Ifc;
configuration.ActivePhaseId = ElementId.InvalidElementId.IntegerValue;
configuration.SpaceBoundaries = spaceBoundaries;
configuration.SplitWallsAndColumns = splitWalls;
configuration.IncludeSteelElements = includeSteelElements;
// Items from Additional Content Tab
configuration.Export2DElements = PlanElems2D;
configuration.ExportLinkedFiles = exportLinkedFiles;
// Items from Property Sets Tab
configuration.ExportInternalRevitPropertySets = internalSets;
configuration.ExportBaseQuantities = exportBaseQuantities;
configuration.ExportSchedulesAsPsets = schedulesAsPSets;
configuration.ExportUserDefinedPsets = userDefinedPSets;
configuration.ExportUserDefinedPsetsFileName = System.IO.Path.GetDirectoryName(Assembly.GetExecutingAssembly().Location) + @"\" + configuration.Name + @".txt";
configuration.ExportUserDefinedParameterMapping = userDefinedParameterMapping;
// Items from Advanced Tab
configuration.ExportBoundingBox = exportBoundingBox;
// Items from the Entities to Export Tab
configuration.ExcludeFilter = excludeFilter;
configuration.m_isBuiltIn = true;
configuration.m_isInSession = false;
return(configuration);
}
/// <summary>
/// Creates a new default configuration.
/// </summary>
/// <returns>The new default configuration.</returns>
public static IFCExportConfiguration CreateDefaultConfiguration()
{
IFCExportConfiguration defConfig = new IFCExportConfiguration
{
Name = "<< Default >>"
};
return(defConfig);
}
/// <summary>
/// Updates the configuration ExportSolidModelRep when the "Export Solid Models when Possible" option changed in the check box.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="e">Event arguments that contains the event data.</param>
private void checkboxExportSolidModelRep_Checked(object sender, RoutedEventArgs e)
{
CheckBox checkBox = (CheckBox)sender;
IFCExportConfiguration configuration = GetSelectedConfiguration();
if (configuration != null)
{
configuration.ExportSolidModelRep = GetCheckbuttonChecked(checkBox);
}
}
/// <summary>
/// Updates the result after the Use2DRoomVolumes is picked.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="e">Event arguments that contains the event data.</param>
private void checkBoxUse2DRoomVolumes_Checked(object sender, RoutedEventArgs e)
{
CheckBox checkBox = (CheckBox)sender;
IFCExportConfiguration configuration = GetSelectedConfiguration();
if (configuration != null)
{
configuration.Use2DRoomBoundaryForVolume = GetCheckbuttonChecked(checkBox);
}
}
/// <summary>
/// Updates the configuration StoreIFCGUID when the Store IFC GUID changed in the check box.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="e">Event arguments that contains the event data.</param>
private void checkboxStoreIFCGUID_Checked(object sender, RoutedEventArgs e)
{
CheckBox checkBox = (CheckBox)sender;
IFCExportConfiguration configuration = GetSelectedConfiguration();
if (configuration != null)
{
configuration.StoreIFCGUID = GetCheckbuttonChecked(checkBox);
}
}
/// <summary>
/// Update checkbox for user-defined Pset option
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="e">Event arguments that contains the event data.</param>
private void checkboxExportUserDefinedPset_Checked(object sender, RoutedEventArgs e)
{
CheckBox checkBox = (CheckBox)sender;
IFCExportConfiguration configuration = GetSelectedConfiguration();
if (configuration != null)
{
configuration.ExportUserDefinedPsets = GetCheckbuttonChecked(checkBox);
}
}
/// <summary>
/// Returns the name of selected configuration.
/// </summary>
/// <returns>The name of selected configuration.</returns>
public String GetSelectedConfigurationName()
{
IFCExportConfiguration configuration = GetSelectedConfiguration();
if (configuration == null)
{
return(null);
}
return(configuration.Name);
}
/// <summary>
/// Updates the configuration SpaceBoundaries when the space boundary level changed in the combobox.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="e">Event arguments that contains the event data.</param>
private void comboboxSpaceBoundaries_SelectionChanged(object sender, SelectionChangedEventArgs e)
{
IFCSpaceBoundariesAttributes attributes = (IFCSpaceBoundariesAttributes)comboboxSpaceBoundaries.SelectedItem;
IFCExportConfiguration configuration = GetSelectedConfiguration();
if (configuration != null)
{
configuration.SpaceBoundaries = attributes.Level;
}
}
/// <summary>
/// Updates the configuration IncludeSiteElevation when the Export Bounding Box changed in the check box.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="e">Event arguments that contains the event data.</param>
private void checkboxIfcSiteElevation_Checked(object sender, RoutedEventArgs e)
{
CheckBox checkBox = (CheckBox)sender;
IFCExportConfiguration configuration = GetSelectedConfiguration();
if (configuration != null)
{
configuration.IncludeSiteElevation = GetCheckbuttonChecked(checkBox);
}
}
/// <summary>
/// Updates the configuration ActivePhase when the active phase changed in the combobox.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="e">Event arguments that contains the event data.</param>
private void comboboxActivePhase_SelectionChanged(object sender, SelectionChangedEventArgs e)
{
IFCPhaseAttributes attributes = (IFCPhaseAttributes)comboboxActivePhase.SelectedItem;
IFCExportConfiguration configuration = GetSelectedConfiguration();
if (configuration != null)
{
configuration.ActivePhaseId = attributes.PhaseId;
}
}
/// <summary>
/// Updates the configuration IFCFileType when FileType changed in the combobox.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="e">Event arguments that contains the event data.</param>
private void comboboxFileType_SelectionChanged(object sender, SelectionChangedEventArgs e)
{
IFCFileFormatAttributes attributes = (IFCFileFormatAttributes)comboboxFileType.SelectedItem;
IFCExportConfiguration configuration = GetSelectedConfiguration();
if (configuration != null)
{
configuration.IFCFileType = attributes.FileType;
}
}
/// <summary>
/// Updates the configuration IFCVersion when IFCType changed in the combobox.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="e">Event arguments that contains the event data.</param>
private void comboboxIfcType_SelectionChanged(object sender, SelectionChangedEventArgs e)
{
IFCVersionAttributes attributes = (IFCVersionAttributes)comboboxIfcType.SelectedItem;
IFCExportConfiguration configuration = GetSelectedConfiguration();
if (configuration != null)
{
configuration.IFCVersion = attributes.Version;
}
}
/// <summary>
/// Updates the result after the FamilyAndTypeName is picked.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="e">Event arguments that contains the event data.</param>
private void checkBoxFamilyAndTypeName_Checked(object sender, RoutedEventArgs e)
{
CheckBox checkBox = (CheckBox)sender;
IFCExportConfiguration configuration = GetSelectedConfiguration();
if (configuration != null)
{
configuration.UseFamilyAndTypeNameForReference = GetCheckbuttonChecked(checkBox);
}
}
/// <summary>
/// Updates the configuration UseCoarseTessellation when the Use Coarse Tessellation changed in the check box.
/// </summary>
/// <param name="sender">The source of the event.</param>
/// <param name="e">Event arguments that contains the event data.</param>
private void checkboxUseCoarseTessellation_Checked(object sender, RoutedEventArgs e)
{
CheckBox checkBox = (CheckBox)sender;
IFCExportConfiguration configuration = GetSelectedConfiguration();
if (configuration != null)
{
configuration.UseCoarseTessellation = GetCheckbuttonChecked(checkBox);
}
}
/// <summary>
/// Constructs a copy from a defined configuration.
/// </summary>
/// <param name="other">The configuration to copy.</param>
private IFCExportConfiguration(IFCExportConfiguration other)
{
this.Name = other.Name;
this.IFCVersion = other.IFCVersion;
this.IFCFileType = other.IFCFileType;
this.SpaceBoundaries = other.SpaceBoundaries;
this.ExportBaseQuantities = other.ExportBaseQuantities;
this.SplitWallsAndColumns = other.SplitWallsAndColumns;
this.ExportInternalRevitPropertySets = other.ExportInternalRevitPropertySets;
this.ExportIFCCommonPropertySets = other.ExportIFCCommonPropertySets;
this.Export2DElements = other.Export2DElements;
this.VisibleElementsOfCurrentView = other.VisibleElementsOfCurrentView;
this.Use2DRoomBoundaryForVolume = other.Use2DRoomBoundaryForVolume;
this.UseFamilyAndTypeNameForReference = other.UseFamilyAndTypeNameForReference;
this.ExportPartsAsBuildingElements = other.ExportPartsAsBuildingElements;
this.ExportSurfaceStyles = other.ExportSurfaceStyles;
this.m_isBuiltIn = other.m_isBuiltIn;
this.m_isInSession = other.m_isInSession;
}
/// <summary>
/// Add a configuration to the map list to show in dialog.
/// </summary>
/// <param name="configuration">The configuration to add.</param>
private void AddToConfigList(IFCExportConfiguration configuration)
{
m_configMap.Add(configuration);
}
/// <summary>
/// Creates a builtIn configuration by particular options.
/// </summary>
/// <param name="name">The configuration name.</param>
/// <param name="ifcVersion">The IFCVersion.</param>
/// <param name="spaceBoundaries">The space boundary level.</param>
/// <param name="exportBaseQuantities">The ExportBaseQuantities.</param>
/// <param name="splitWalls">The SplitWallsAndColumns option.</param>
/// <param name="internalSets">The ExportInternalRevitPropertySets option.</param>
/// <param name="schedulesAsPSets">The ExportSchedulesAsPsets option.</param>
/// <param name="userDefinedPSets">The ExportUserDefinedPsets option.</param>
/// <param name="PlanElems2D">The Export2DElements option.</param>
/// <param name="exportBoundingBox">The exportBoundingBox option.</param>
/// <param name="exportLinkedFiles">The exportLinkedFiles option.</param>
/// <returns>The builtIn configuration.</returns>
public static IFCExportConfiguration CreateBuiltInConfiguration(string name,
IFCVersion ifcVersion,
int spaceBoundaries,
bool exportBaseQuantities,
bool splitWalls,
bool internalSets,
bool schedulesAsPSets,
bool userDefinedPSets,
bool PlanElems2D,
bool exportBoundingBox,
bool exportLinkedFiles)
{
IFCExportConfiguration configuration = new IFCExportConfiguration();
configuration.Name = name;
configuration.IFCVersion = ifcVersion;
configuration.IFCFileType = IFCFileFormat.Ifc;
configuration.SpaceBoundaries = spaceBoundaries;
configuration.ExportBaseQuantities = exportBaseQuantities;
configuration.SplitWallsAndColumns = splitWalls;
configuration.ExportInternalRevitPropertySets = internalSets;
configuration.ExportIFCCommonPropertySets = true;
configuration.Export2DElements = PlanElems2D;
configuration.VisibleElementsOfCurrentView = false;
configuration.Use2DRoomBoundaryForVolume = false;
configuration.UseFamilyAndTypeNameForReference = false;
configuration.ExportPartsAsBuildingElements = false;
configuration.ExportBoundingBox = exportBoundingBox;
configuration.ExportSolidModelRep = false;
configuration.ExportSchedulesAsPsets = schedulesAsPSets;
configuration.ExportUserDefinedPsets = userDefinedPSets;
configuration.ExportUserDefinedPsetsFileName = System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location) + @"\" + name + @".txt";
configuration.ExportLinkedFiles = exportLinkedFiles;
configuration.IncludeSiteElevation = false;
configuration.UseCoarseTessellation = true;
configuration.StoreIFCGUID = false;
configuration.m_isBuiltIn = true;
configuration.m_isInSession = false;
configuration.ActivePhaseId = ElementId.InvalidElementId;
return configuration;
}
/// <summary>
/// Constructs a copy configuration by providing name and defined configuration.
/// </summary>
/// <param name="name">The name of copy configuration.</param>
/// <param name="other">The defined configuration to copy.</param>
private IFCExportConfiguration(String name, IFCExportConfiguration other)
{
this.Name = name;
this.IFCVersion = other.IFCVersion;
this.IFCFileType = other.IFCFileType;
this.SpaceBoundaries = other.SpaceBoundaries;
this.ExportBaseQuantities = other.ExportBaseQuantities;
this.SplitWallsAndColumns = other.SplitWallsAndColumns;
this.ExportInternalRevitPropertySets = other.ExportInternalRevitPropertySets;
this.ExportIFCCommonPropertySets = other.ExportIFCCommonPropertySets;
this.Export2DElements = other.Export2DElements;
this.VisibleElementsOfCurrentView = other.VisibleElementsOfCurrentView;
this.Use2DRoomBoundaryForVolume = other.Use2DRoomBoundaryForVolume;
this.UseFamilyAndTypeNameForReference = other.UseFamilyAndTypeNameForReference;
this.ExportPartsAsBuildingElements = other.ExportPartsAsBuildingElements;
this.ExportBoundingBox = other.ExportBoundingBox;
this.ExportSolidModelRep = other.ExportSolidModelRep;
this.ExportSchedulesAsPsets = other.ExportSchedulesAsPsets;
this.ExportUserDefinedPsets = other.ExportUserDefinedPsets;
this.ExportUserDefinedPsetsFileName = other.ExportUserDefinedPsetsFileName;
this.ExportLinkedFiles = other.ExportLinkedFiles;
this.IncludeSiteElevation = other.IncludeSiteElevation;
this.UseCoarseTessellation = other.UseCoarseTessellation;
this.ActivePhaseId = other.ActivePhaseId;
this.m_isBuiltIn = false;
this.m_isInSession = false;
}
/// <summary>
/// Gets the new duplicated setup name.
/// </summary>
/// <param name="configuration">The configuration to duplicate.</param>
/// <returns>The new duplicated setup name.</returns>
private String GetDuplicateSetupName(IFCExportConfiguration configuration)
{
if (configuration == null)
configuration = GetSelectedConfiguration();
return GetFirstIncrementalName(configuration.Name);
}
private void UpdatePhaseAttributes(IFCExportConfiguration configuration)
{
if (configuration.VisibleElementsOfCurrentView)
{
UIDocument uiDoc = new UIDocument(IFCCommandOverrideApplication.TheDocument);
Parameter currPhase = uiDoc.ActiveView.get_Parameter(BuiltInParameter.VIEW_PHASE);
if (currPhase != null)
configuration.ActivePhaseId = currPhase.AsElementId();
else
configuration.ActivePhaseId = ElementId.InvalidElementId;
}
if (!IFCPhaseAttributes.Validate(configuration.ActivePhaseId))
configuration.ActivePhaseId = ElementId.InvalidElementId;
foreach (IFCPhaseAttributes attribute in comboboxActivePhase.Items.Cast<IFCPhaseAttributes>())
{
if (configuration.ActivePhaseId == attribute.PhaseId)
{
comboboxActivePhase.SelectedItem = attribute;
break;
}
}
comboboxActivePhase.IsEnabled = !configuration.VisibleElementsOfCurrentView;
}
/// <summary>
/// Gets the in-session configuration.
/// </summary>
/// <returns>The in-session configuration.</returns>
public static IFCExportConfiguration GetInSession()
{
if (s_inSessionConfiguration == null)
{
s_inSessionConfiguration = new IFCExportConfiguration();
s_inSessionConfiguration.Name = Resources.InSessionConfiguration;
s_inSessionConfiguration.m_isInSession = true;
}
return s_inSessionConfiguration;
}
/// <summary>
/// Constructs a copy from a defined configuration.
/// </summary>
/// <param name="other">The configuration to copy.</param>
private IFCExportConfiguration(IFCExportConfiguration other)
{
this.Name = other.Name;
this.IFCVersion = other.IFCVersion;
this.IFCFileType = other.IFCFileType;
this.SpaceBoundaries = other.SpaceBoundaries;
this.ExportBaseQuantities = other.ExportBaseQuantities;
this.SplitWallsAndColumns = other.SplitWallsAndColumns;
this.ExportInternalRevitPropertySets = other.ExportInternalRevitPropertySets;
this.ExportIFCCommonPropertySets = other.ExportIFCCommonPropertySets;
this.Export2DElements = other.Export2DElements;
this.VisibleElementsOfCurrentView = other.VisibleElementsOfCurrentView;
this.Use2DRoomBoundaryForVolume = other.Use2DRoomBoundaryForVolume;
this.UseFamilyAndTypeNameForReference = other.UseFamilyAndTypeNameForReference;
this.ExportPartsAsBuildingElements = other.ExportPartsAsBuildingElements;
this.UseActiveViewGeometry = other.UseActiveViewGeometry;
this.ExportSpecificSchedules = other.ExportSpecificSchedules;
this.ExportBoundingBox = other.ExportBoundingBox;
this.ExportSolidModelRep = other.ExportSolidModelRep;
this.ExportSchedulesAsPsets = other.ExportSchedulesAsPsets;
this.ExportUserDefinedPsets = other.ExportUserDefinedPsets;
this.ExportUserDefinedPsetsFileName = other.ExportUserDefinedPsetsFileName;
this.ExportLinkedFiles = other.ExportLinkedFiles;
this.IncludeSiteElevation = other.IncludeSiteElevation;
this.TessellationLevelOfDetail = other.TessellationLevelOfDetail;
this.StoreIFCGUID = other.StoreIFCGUID;
this.m_isBuiltIn = other.m_isBuiltIn;
this.m_isInSession = other.m_isInSession;
this.ActivePhaseId = other.ActivePhaseId;
this.ExportRoomsInView = other.ExportRoomsInView;
}
/// <summary>
/// Set the in-session configuration to cache.
/// </summary>
/// <param name="configuration">The the in-session configuration.</param>
public static void SetInSession(IFCExportConfiguration configuration)
{
if (!configuration.IsInSession)
{
throw new ArgumentException("SetInSession requires an In-Session configuration", "configuration");
}
s_inSessionConfiguration = configuration;
}
/// <summary>
/// Updates the active configuration options to the controls.
/// </summary>
/// <param name="configuration">The active configuration.</param>
private void UpdateActiveConfigurationOptions(IFCExportConfiguration configuration)
{
foreach (IFCVersionAttributes attribute in comboboxIfcType.Items.Cast<IFCVersionAttributes>())
{
if (attribute.Version == configuration.IFCVersion)
{
comboboxIfcType.SelectedItem = attribute;
}
}
foreach (IFCFileFormatAttributes format in comboboxFileType.Items.Cast<IFCFileFormatAttributes>())
{
if (configuration.IFCFileType == format.FileType)
comboboxFileType.SelectedItem = format;
}
foreach (IFCSpaceBoundariesAttributes attribute in comboboxSpaceBoundaries.Items.Cast<IFCSpaceBoundariesAttributes>())
{
if (configuration.SpaceBoundaries == attribute.Level)
comboboxSpaceBoundaries.SelectedItem = attribute;
}
checkboxExportBaseQuantities.IsChecked = configuration.ExportBaseQuantities;
checkboxSplitWalls.IsChecked = configuration.SplitWallsAndColumns;
checkbox2dElements.IsChecked = configuration.Export2DElements;
checkboxInternalPropertySets.IsChecked = configuration.ExportInternalRevitPropertySets;
checkboxVisibleElementsCurrView.IsChecked = configuration.VisibleElementsOfCurrentView;
checkBoxUse2DRoomVolumes.IsChecked = configuration.Use2DRoomBoundaryForVolume;
checkBoxFamilyAndTypeName.IsChecked = configuration.UseFamilyAndTypeNameForReference;
checkBoxExportPartsAsBuildingElements.IsChecked = configuration.ExportPartsAsBuildingElements;
UIElement[] configurationElements = new UIElement[]{comboboxIfcType,
comboboxFileType,
comboboxSpaceBoundaries,
checkboxExportBaseQuantities,
checkboxSplitWalls,
checkbox2dElements,
checkboxInternalPropertySets,
checkboxVisibleElementsCurrView,
checkBoxUse2DRoomVolumes,
checkBoxFamilyAndTypeName,
checkBoxExportPartsAsBuildingElements};
foreach (UIElement element in configurationElements)
{
element.IsEnabled = !configuration.IsBuiltIn;
}
}
/// <summary>
/// Updates the active configuration options to the controls.
/// </summary>
/// <param name="configuration">The active configuration.</param>
private void UpdateActiveConfigurationOptions(IFCExportConfiguration configuration)
{
foreach (IFCVersionAttributes attribute in comboboxIfcType.Items.Cast<IFCVersionAttributes>())
{
if (attribute.Version == configuration.IFCVersion)
{
comboboxIfcType.SelectedItem = attribute;
break;
}
}
foreach (IFCFileFormatAttributes format in comboboxFileType.Items.Cast<IFCFileFormatAttributes>())
{
if (configuration.IFCFileType == format.FileType)
{
comboboxFileType.SelectedItem = format;
break;
}
}
foreach (IFCSpaceBoundariesAttributes attribute in comboboxSpaceBoundaries.Items.Cast<IFCSpaceBoundariesAttributes>())
{
if (configuration.SpaceBoundaries == attribute.Level)
{
comboboxSpaceBoundaries.SelectedItem = attribute;
break;
}
}
UpdatePhaseAttributes(configuration);
checkboxExportBaseQuantities.IsChecked = configuration.ExportBaseQuantities;
checkboxSplitWalls.IsChecked = configuration.SplitWallsAndColumns;
checkbox2dElements.IsChecked = configuration.Export2DElements;
checkboxInternalPropertySets.IsChecked = configuration.ExportInternalRevitPropertySets;
checkboxIFCCommonPropertySets.IsChecked = configuration.ExportIFCCommonPropertySets;
checkboxVisibleElementsCurrView.IsChecked = configuration.VisibleElementsOfCurrentView;
checkBoxUse2DRoomVolumes.IsChecked = configuration.Use2DRoomBoundaryForVolume;
checkBoxFamilyAndTypeName.IsChecked = configuration.UseFamilyAndTypeNameForReference;
checkBoxExportPartsAsBuildingElements.IsChecked = configuration.ExportPartsAsBuildingElements;
checkboxExportBoundingBox.IsChecked = configuration.ExportBoundingBox;
checkboxExportSolidModelRep.IsChecked = configuration.ExportSolidModelRep;
checkboxExportSchedulesAsPsets.IsChecked = configuration.ExportSchedulesAsPsets;
checkboxExportUserDefinedPset.IsChecked = configuration.ExportUserDefinedPsets;
userDefinedPropertySetFileName.Text = configuration.ExportUserDefinedPsetsFileName;
checkBoxExportLinkedFiles.IsChecked = configuration.ExportLinkedFiles;
checkboxIncludeIfcSiteElevation.IsChecked = configuration.IncludeSiteElevation;
checkboxUseCoarseTessellation.IsChecked = configuration.UseCoarseTessellation;
checkboxStoreIFCGUID.IsChecked = configuration.StoreIFCGUID;
UIElement[] configurationElements = new UIElement[]{comboboxIfcType,
comboboxFileType,
comboboxSpaceBoundaries,
checkboxExportBaseQuantities,
checkboxSplitWalls,
checkbox2dElements,
checkboxInternalPropertySets,
checkboxIFCCommonPropertySets,
checkboxVisibleElementsCurrView,
checkBoxExportPartsAsBuildingElements,
checkBoxUse2DRoomVolumes,
checkBoxFamilyAndTypeName,
checkboxExportBoundingBox,
checkboxExportSolidModelRep,
checkBoxExportLinkedFiles,
checkboxIncludeIfcSiteElevation,
checkboxUseCoarseTessellation,
checkboxStoreIFCGUID,
checkboxExportSchedulesAsPsets,
comboboxActivePhase,
checkboxExportUserDefinedPset,
userDefinedPropertySetFileName,
buttonBrowse
};
foreach (UIElement element in configurationElements)
{
element.IsEnabled = !configuration.IsBuiltIn;
}
comboboxActivePhase.IsEnabled = comboboxActivePhase.IsEnabled && !configuration.VisibleElementsOfCurrentView;
userDefinedPropertySetFileName.IsEnabled = userDefinedPropertySetFileName.IsEnabled && configuration.ExportUserDefinedPsets;
buttonBrowse.IsEnabled = buttonBrowse.IsEnabled && configuration.ExportUserDefinedPsets;
}
/// <summary>
/// Adds a configuration to the map.
/// </summary>
/// <param name="configuration">The configuration.</param>
public void Add(IFCExportConfiguration configuration)
{
m_configurations.Add(configuration.Name, configuration);
}
/// <summary>
/// Creates a new configuration, either a default or a copy configuration.
/// </summary>
/// <param name="configuration">The specific configuration, null to create a defult configuration.</param>
/// <param name="name">The name of the new configuration.</param>
/// <returns>The new configuration.</returns>
private IFCExportConfiguration CreateNewEditableConfiguration(IFCExportConfiguration configuration, String name)
{
// create new configuration based on input, or default configuration.
IFCExportConfiguration newConfiguration;
if (configuration == null)
{
newConfiguration = IFCExportConfiguration.CreateDefaultConfiguration();
newConfiguration.Name = name;
}
else
newConfiguration = configuration.Duplicate(name);
m_configurationsMap.Add(newConfiguration);
// set new configuration as selected
listBoxConfigurations.Items.Add(newConfiguration);
listBoxConfigurations.SelectedItem = newConfiguration;
return configuration;
}
/// <summary>
/// Updates the active configuration options to the controls.
/// </summary>
/// <param name="configuration">The active configuration.</param>
private void UpdateActiveConfigurationOptions(IFCExportConfiguration configuration)
{
foreach (IFCVersionAttributes attribute in comboboxIfcType.Items.Cast<IFCVersionAttributes>())
{
if (attribute.Version == configuration.IFCVersion)
{
comboboxIfcType.SelectedItem = attribute;
break;
}
}
foreach (IFCFileFormatAttributes format in comboboxFileType.Items.Cast<IFCFileFormatAttributes>())
{
if (configuration.IFCFileType == format.FileType)
{
comboboxFileType.SelectedItem = format;
break;
}
}
foreach (IFCSpaceBoundariesAttributes attribute in comboboxSpaceBoundaries.Items.Cast<IFCSpaceBoundariesAttributes>())
{
if (configuration.SpaceBoundaries == attribute.Level)
{
comboboxSpaceBoundaries.SelectedItem = attribute;
break;
}
}
UpdatePhaseAttributes(configuration);
checkboxExportBaseQuantities.IsChecked = configuration.ExportBaseQuantities;
checkboxSplitWalls.IsChecked = configuration.SplitWallsAndColumns;
checkbox2dElements.IsChecked = configuration.Export2DElements;
checkboxInternalPropertySets.IsChecked = configuration.ExportInternalRevitPropertySets;
checkboxIFCCommonPropertySets.IsChecked = configuration.ExportIFCCommonPropertySets;
checkboxVisibleElementsCurrView.IsChecked = configuration.VisibleElementsOfCurrentView;
checkBoxUse2DRoomVolumes.IsChecked = configuration.Use2DRoomBoundaryForVolume;
checkBoxFamilyAndTypeName.IsChecked = configuration.UseFamilyAndTypeNameForReference;
checkBoxExportPartsAsBuildingElements.IsChecked = configuration.ExportPartsAsBuildingElements;
checkboxExportBoundingBox.IsChecked = configuration.ExportBoundingBox;
checkboxExportSolidModelRep.IsChecked = configuration.ExportSolidModelRep;
checkboxExportSchedulesAsPsets.IsChecked = configuration.ExportSchedulesAsPsets;
checkboxExportUserDefinedPset.IsChecked = configuration.ExportUserDefinedPsets;
userDefinedPropertySetFileName.Text = configuration.ExportUserDefinedPsetsFileName;
checkBoxExportLinkedFiles.IsChecked = configuration.ExportLinkedFiles;
checkboxIncludeIfcSiteElevation.IsChecked = configuration.IncludeSiteElevation;
checkboxUseCoarseTessellation.IsChecked = configuration.UseCoarseTessellation;
sliderLODValue.Value = configuration.TessellationLevelOfDetail;
checkboxStoreIFCGUID.IsChecked = configuration.StoreIFCGUID;
checkBoxExportRoomsInView.IsChecked = configuration.ExportRoomsInView;
UIElement[] configurationElements = new UIElement[]{comboboxIfcType,
comboboxFileType,
comboboxSpaceBoundaries,
checkboxExportBaseQuantities,
checkboxSplitWalls,
checkbox2dElements,
checkboxInternalPropertySets,
checkboxIFCCommonPropertySets,
checkboxVisibleElementsCurrView,
checkBoxExportPartsAsBuildingElements,
checkBoxUse2DRoomVolumes,
checkBoxFamilyAndTypeName,
checkboxExportBoundingBox,
checkboxExportSolidModelRep,
checkBoxExportLinkedFiles,
checkboxIncludeIfcSiteElevation,
checkboxUseCoarseTessellation,
checkboxStoreIFCGUID,
checkboxExportSchedulesAsPsets,
checkBoxExportRoomsInView,
comboboxActivePhase,
checkboxExportUserDefinedPset,
userDefinedPropertySetFileName,
buttonBrowse
};
foreach (UIElement element in configurationElements)
{
element.IsEnabled = !configuration.IsBuiltIn;
}
comboboxActivePhase.IsEnabled = comboboxActivePhase.IsEnabled && !configuration.VisibleElementsOfCurrentView;
userDefinedPropertySetFileName.IsEnabled = userDefinedPropertySetFileName.IsEnabled && configuration.ExportUserDefinedPsets;
buttonBrowse.IsEnabled = buttonBrowse.IsEnabled && configuration.ExportUserDefinedPsets;
// ExportRoomsInView option will only be enabled if it is not currently disabled AND the "export elements visible in view" option is checked
bool? cboVisibleElementInCurrentView = checkboxVisibleElementsCurrView.IsChecked;
checkBoxExportRoomsInView.IsEnabled = checkBoxExportRoomsInView.IsEnabled && cboVisibleElementInCurrentView.HasValue ? cboVisibleElementInCurrentView.Value : false;
// This is to enable the Tessellation related checkbox for Reference view only.
// At the same time, it set the slider to be visible if the checkbox is unchecked
if (string.Compare(configuration.Name, "IFC4 Reference View") == 0)
{
checkboxUseCoarseTessellation.IsEnabled = true;
if (checkboxUseCoarseTessellation.IsChecked == true)
{
DocPanel_tessellation.Visibility = System.Windows.Visibility.Hidden;
}
else
{
DocPanel_tessellation.Visibility = System.Windows.Visibility.Visible;
sliderLODValue.IsEnabled = true;
// 0.25 is the default value of Coarse tessellation
if (checkboxUseCoarseTessellation.IsChecked == true)
sliderLODValue.Value = 0.25;
}
}
else
{
DocPanel_tessellation.Visibility = System.Windows.Visibility.Hidden;
}
}
/// <summary>
/// Creates a builtIn configuration by particular options.
/// </summary>
/// <param name="name">The configuration name.</param>
/// <param name="ifcVersion">The IFCVersion.</param>
/// <param name="spaceBoundaries">The space boundary level.</param>
/// <param name="exportBaseQuantities">The ExportBaseQuantities.</param>
/// <param name="splitWalls">The SplitWallsAndColumns.</param>
/// <param name="internalSets">The ExportInternalRevitPropertySets.</param>
/// <param name="PlanElems2D">The Export2DElements.</param>
/// <returns>The builtIn configuration.</returns>
public static IFCExportConfiguration CreateBuiltInConfiguration(string name,
IFCVersion ifcVersion,
int spaceBoundaries,
bool exportBaseQuantities,
bool splitWalls,
bool internalSets,
bool PlanElems2D)
{
IFCExportConfiguration configuration = new IFCExportConfiguration();
configuration.Name = name;
configuration.IFCVersion = ifcVersion;
configuration.IFCFileType = IFCFileFormat.Ifc;
configuration.SpaceBoundaries = spaceBoundaries;
configuration.ExportBaseQuantities = exportBaseQuantities;
configuration.SplitWallsAndColumns = splitWalls;
configuration.ExportInternalRevitPropertySets = internalSets;
configuration.Export2DElements = PlanElems2D;
configuration.VisibleElementsOfCurrentView = false;
configuration.Use2DRoomBoundaryForVolume = false;
configuration.UseFamilyAndTypeNameForReference = false;
configuration.ExportPartsAsBuildingElements = false;
configuration.m_isBuiltIn = true;
configuration.m_isInSession = false;
return configuration;
}
/// <summary>
/// Gets the in-session configuration.
/// </summary>
/// <returns>The in-session configuration.</returns>
public static IFCExportConfiguration GetInSession()
{
if (s_inSessionConfiguration == null)
{
s_inSessionConfiguration = new IFCExportConfiguration();
s_inSessionConfiguration.Name = Resources.InSessionConfiguration;
s_inSessionConfiguration.ExportUserDefinedPsetsFileName = System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location) + @"\DefaultUserDefinedParameterSets.txt";
s_inSessionConfiguration.m_isInSession = true;
}
return s_inSessionConfiguration;
}