public static void CreateFinFloor(this Room room)
{
BoundaryData BData = new BoundaryData(room);
if (null != BData.Edges())
{
CurveArray array = new CurveArray();
foreach (KeyValuePair <Line, XYZ> kvp in BData.Edges())
{
Curve c = kvp.Key as Curve;
array.Append(c);
}
Autodesk.Revit.Creation.Document doc = room.Document.Create;
doc.NewFloor(array, false);
}
}
private void CreateWall()
{
RevitCreation.Application createApp = m_commandData.Application.Application.Create;
RevitCreation.Document createDoc = m_commandData.Application.ActiveUIDocument.Document.Create;
RevitDB.Line geometryLine = RevitDB.Line.CreateBound(m_startPoint, m_endPoint);
if (null == geometryLine)
{
throw new Exception("Create the geometry line failed.");
}
RevitDB.Wall createdWall = RevitDB.Wall.Create(m_commandData.Application.ActiveUIDocument.Document,
geometryLine, m_createType.Id, m_createlevel.Id,
15, m_startPoint.Z + m_createlevel.Elevation, true, true);
if (null == createdWall)
{
throw new Exception("Create the wall failed.");
}
}
/// <summary>
/// Create a wall with the collected data or the data read from journal
/// </summary>
private void CreateWall()
{
// Get the create classes.
Creation.Application createApp = m_commandData.Application.Application.Create;
Creation.Document createDoc = m_commandData.Application.ActiveUIDocument.Document.Create;
// Create geometry line(curve)
Line geometryLine = Line.CreateBound(m_startPoint, m_endPoint);
if (null == geometryLine) // assert the creation is successful
{
throw new Exception("Create the geometry line failed.");
}
// Create the wall using the wall type, level and created geometry line
Wall createdWall = Wall.Create(m_commandData.Application.ActiveUIDocument.Document, geometryLine, m_createType.Id, m_createlevel.Id,
15, m_startPoint.Z + m_createlevel.Elevation, true, true);
if (null == createdWall) // assert the creation is successful
{
throw new Exception("Create the wall failed.");
}
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Application app = uiapp.Application;
Document doc = uidoc.Document;
if (doc.IsFamilyDocument)
{
TaskDialog.Show("ОТМЕНЕНО", "Данная команда предназначена для запуска в документе проекта");
return(Result.Cancelled);
}
try
{
//Выбрать несколько файлов CSV с координатами
Transform projectTransform = Utils.GetProjectCoordinatesTransform(doc);
string[] filenames = null;
WinForms.OpenFileDialog openFileDialog1 = new WinForms.OpenFileDialog();
string curDocPath = doc.PathName;
if (!String.IsNullOrEmpty(curDocPath))
{
openFileDialog1.InitialDirectory = Path.GetDirectoryName(curDocPath);
}
openFileDialog1.Filter = "csv files (*.csv)|*.csv";
openFileDialog1.FilterIndex = 1;
openFileDialog1.RestoreDirectory = true;
openFileDialog1.Multiselect = true;
openFileDialog1.Title = "Выберите таблицы CSV с координатами 3d-полилиний";
if (openFileDialog1.ShowDialog() == WinForms.DialogResult.OK)
{
filenames = openFileDialog1.FileNames;
List <List <XYZ> > lines3d = new List <List <XYZ> >();
if (Utils.ReadCoordinatesFromCSV(filenames, projectTransform, lines3d))
{
//Создать линии модели по координатам
RCreation.Document crDoc = doc.Create;
using (Transaction tr = new Transaction(doc))
{
tr.Start("Draw 3D line");
foreach (List <XYZ> ptList in lines3d)
{
for (int i = 0; i < ptList.Count - 1; i++)
{
XYZ startPt = ptList[i];
XYZ endPt = ptList[i + 1];
if (!startPt.IsAlmostEqualTo(endPt))
{
Line line = Line.CreateBound(startPt, endPt);
XYZ lineVector = (endPt - startPt).Normalize();
XYZ horizontal = XYZ.BasisZ.CrossProduct(lineVector).Normalize();
XYZ norm = lineVector.CrossProduct(horizontal).Normalize();
Plane plane = Plane.CreateByNormalAndOrigin(norm, startPt);
SketchPlane sketchPlane = SketchPlane.Create(doc, plane);
crDoc.NewModelCurve(line, sketchPlane);
}
}
}
tr.Commit();
}
}
}
}
catch (Autodesk.Revit.Exceptions.OperationCanceledException)
{
}
catch (Exception ex)
{
CommonException(ex, "Ошибка при вычерчивании 3d линии в Revit");
}
return(Result.Succeeded);
}
private static void PlaceLevelBasedHosted(Autodesk.Revit.Creation.Document create, Element host, FamilySymbol familySymbol)
{
create.NewFamilyInstance(Arrangement.Current.Center, familySymbol, host, Loader.Level, StructuralType.NonStructural);
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Application app = uiapp.Application;
Document doc = uidoc.Document;
if (doc.IsFamilyDocument)
{
TaskDialog.Show("ОТМЕНЕНО", "Данная команда предназначена для запуска в документе проекта");
return(Result.Cancelled);
}
try
{
Transform projectTransform = Utils.GetProjectCoordinatesTransform(doc);
//выбрать несколько xml с расположением водосбросов
string[] filenames = null;
WinForms.OpenFileDialog openFileDialog1 = new WinForms.OpenFileDialog();
string curDocPath = doc.PathName;
if (!String.IsNullOrEmpty(curDocPath))
{
openFileDialog1.InitialDirectory = Path.GetDirectoryName(curDocPath);
}
openFileDialog1.Filter = "xml files (*.xml)|*.xml";
openFileDialog1.FilterIndex = 1;
openFileDialog1.RestoreDirectory = true;
openFileDialog1.Multiselect = true;
openFileDialog1.Title = "Выберите таблицы CSV с координатами 3d-полилиний";
if (openFileDialog1.ShowDialog() == WinForms.DialogResult.OK)
{
Creation.Document crDoc = doc.Create;
filenames = openFileDialog1.FileNames;
using (TransactionGroup trGr = new TransactionGroup(doc))
{
trGr.Start("CreateSpillways");
foreach (string filename in filenames)
{
//распаристь xml
PositionData positionData = null;
using (StreamReader sr = new StreamReader(filename))
{
string serializedData = sr.ReadToEnd();
var xmlSerializer = new XmlSerializer(typeof(PositionData));
var stringReader = new StringReader(serializedData);
positionData = (PositionData)xmlSerializer.Deserialize(stringReader);
}
if (positionData != null)
{
foreach (SpillwayPosition sp in positionData.SpillwayPositions)
{
//Загрузка семейства водосброса если еще нет
Family spillwayFamily = null;
if (sp.Slopes.Count == 2)
{
spillwayFamily = Utils.GetFamily(doc, "Водосброс2Укл");
}
else if (sp.Slopes.Count == 3)
{
spillwayFamily = Utils.GetFamily(doc, "Водосброс3Укл");
}
if (spillwayFamily != null)
{
ElementId symId = spillwayFamily.GetFamilySymbolIds().First();
FamilySymbol familySymbol = (FamilySymbol)doc.GetElement(symId);
using (Transaction tr = new Transaction(doc))
{
tr.Start("CreateSpillway");
//активировать типоразмер
if (!familySymbol.IsActive)
{
familySymbol.Activate();
doc.Regenerate();
}
//Вставка водосбросов в заданные координаты
//Поворот на заданный угол
//Если водосброс направлен направо, то использовать отражение (с поворотом в противоположную сторону)
XYZ location = projectTransform.OfPoint(Utils.PointByMeters(sp.X, sp.Y, sp.Z));
FamilyInstance fi = crDoc.NewFamilyInstance(location, familySymbol, StructuralType.NonStructural);
Line rotationAxis = Line.CreateBound(location, location + XYZ.BasisZ);
double rotationAngle = sp.Z_Rotation / (180 / Math.PI);
if (sp.ToTheRight)
{
rotationAngle = rotationAngle + Math.PI;
}
fi.Location.Rotate(rotationAxis, rotationAngle);
if (sp.ToTheRight)
{
XYZ spillwayDir = Transform.CreateRotation(XYZ.BasisZ, rotationAngle).OfVector(XYZ.BasisY);
Plane mirrorPlane = Plane.CreateByNormalAndOrigin(spillwayDir, location);
ElementTransformUtils.MirrorElements(doc, new List <ElementId>()
{
fi.Id
}, mirrorPlane, false);
//doc.Delete(fi.Id);
}
//Назначение параметров уклонов водосброса
for (int i = 0; i < sp.Slopes.Count; i++)
{
string lengthParamName = "Длина" + (i + 1);
string slopeParamName = "Уклон" + (i + 1);
Parameter lengthParam = fi.LookupParameter(lengthParamName);
Parameter slopeParam = fi.LookupParameter(slopeParamName);
if (lengthParam != null && slopeParam != null)
{
Slope s = sp.Slopes[i];
lengthParam.Set(UnitUtils.Convert(s.Len, DisplayUnitType.DUT_METERS, DisplayUnitType.DUT_DECIMAL_FEET));
slopeParam.Set(s.S);
}
}
tr.Commit();
}
}
}
}
}
trGr.Assimilate();
}
}
}
catch (Autodesk.Revit.Exceptions.OperationCanceledException)
{
return(Result.Succeeded);
}
catch (Exception ex)
{
CommonException(ex, "Ошибка при расстановке водосбросов в Revit");
return(Result.Succeeded);
}
return(Result.Succeeded);
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Application app = uiapp.Application;
Document doc = uidoc.Document;
if (doc.IsFamilyDocument)
{
TaskDialog.Show("ОТМЕНЕНО", "Данная команда предназначена для запуска в документе проекта");
return(Result.Cancelled);
}
try
{
//Выбрать несколько файлов CSV с координатами
Transform projectTransform = Utils.GetProjectCoordinatesTransform(doc);
string[] filenames = null;
WinForms.OpenFileDialog openFileDialog1 = new WinForms.OpenFileDialog();
string curDocPath = doc.PathName;
if (!String.IsNullOrEmpty(curDocPath))
{
openFileDialog1.InitialDirectory = Path.GetDirectoryName(curDocPath);
}
openFileDialog1.Filter = "csv files (*.csv)|*.csv";
openFileDialog1.FilterIndex = 1;
openFileDialog1.RestoreDirectory = true;
openFileDialog1.Multiselect = true;
openFileDialog1.Title = "Выберите таблицы CSV с координатами 3d-полилиний";
if (openFileDialog1.ShowDialog() == WinForms.DialogResult.OK)
{
filenames = openFileDialog1.FileNames;
List <List <XYZ> > lines3d = new List <List <XYZ> >();
if (Utils.ReadCoordinatesFromCSV(filenames, projectTransform, lines3d) &&
lines3d.Count > 0 && lines3d.First().Count > 0)
{
//Выбор семейства из числа загруженных семейств формы
//Определить id категории Форма
Categories categories = doc.Settings.Categories;
ElementId IdForm = categories.get_Item(BuiltInCategory.OST_Mass).Id;
SelectTypeWindow selectTypeWindow = new SelectTypeWindow(doc, IdForm);
bool? result = selectTypeWindow.ShowDialog();
if (result != null && result.Value &&
selectTypeWindow.SelectedFamilySymbols.Count > 0)
{
FamilySymbol selectedSymbol = selectTypeWindow.SelectedFamilySymbols.First();
Document crossSectFamDoc = doc.EditFamily(selectedSymbol.Family);
//Создать новое семейство формы
string fileName = Path.Combine(Path.GetDirectoryName(App.AssemblyLocation),
App.FamilyLibRelativePath + massTemplateName + ".rft");
Document massFamDoc = app.NewFamilyDocument(fileName);
if (massFamDoc == null)
{
throw new Exception("Невозможно создать семейство формы");
}
//Пересчет координат относительно координат первой точки
List <List <XYZ> > lines3dInFam = new List <List <XYZ> >();
XYZ basePt = lines3d.First().First();
foreach (List <XYZ> ptList in lines3d)
{
List <XYZ> ptListInFam = new List <XYZ>();
lines3dInFam.Add(ptListInFam);
foreach (XYZ pt in ptList)
{
XYZ convertedPt = pt - basePt;
ptListInFam.Add(convertedPt);
}
}
//Полный путь к сохраненному семейству
string targetRfaFullPath = null;
//Выбрать имя для семейства формы, так чтобы оно не пересекалось с уже загруженными семействами
FilteredElementCollector a = new FilteredElementCollector(doc).OfClass(typeof(Family));
string famName = null;
int n = 0;
do
{
famName = "Massing" + n;
n++;
} while (a.Any(e => e.Name.Equals(famName)));
{
//Расставить формы по координатам внутри формы, считая за ноль первую точку первой линии
//Вставить созданное семейство в проект
//Загрузить семейство поперечного сечения
Family family = crossSectFamDoc.LoadFamily(massFamDoc);
using (Transaction tr = new Transaction(massFamDoc))
{
RCreation.FamilyItemFactory crDoc = massFamDoc.FamilyCreate;
tr.Start("Place cross sections");
//Найти выбранный типоразмер
FamilySymbol familySymbol = null;
foreach (ElementId id in family.GetFamilySymbolIds())
{
FamilySymbol fs = (FamilySymbol)massFamDoc.GetElement(id);
if (fs.Name.Equals(selectedSymbol.Name))
{
familySymbol = fs;
}
}
//активировать типоразмер
Utils.ActivateFamSym(massFamDoc, familySymbol);
//Вставить поперечник в каждую точку и повернуть по биссектриссе
foreach (List <XYZ> ptList in lines3dInFam)
{
for (int i = 0; i < ptList.Count; i++)
{
XYZ pt = ptList[i];
FamilyInstance crossSection = crDoc.NewFamilyInstance(pt, familySymbol, StructuralType.NonStructural);
XYZ prevVector = null;
double prevHorAngle = 0;
XYZ nextVector = null;
double nextHorAngle = 0;
if (i != 0)
{
XYZ prevPt = ptList[i - 1];
prevVector = pt - prevPt;
prevHorAngle = XYZ.BasisY.AngleOnPlaneTo(prevVector, XYZ.BasisZ);
}
if (i != ptList.Count - 1)
{
XYZ nextPt = ptList[i + 1];
nextVector = nextPt - pt;
nextHorAngle = XYZ.BasisY.AngleOnPlaneTo(nextVector, XYZ.BasisZ);
}
//Изначально поперечное сечение ориентировано по оси Y
//Расчет угла поворота
double horRotationAngle = 0;
if (prevVector != null && nextVector != null)
{
horRotationAngle = (prevHorAngle + nextHorAngle) / 2;
}
else if (prevVector != null && nextVector == null)
{
horRotationAngle = prevHorAngle;
}
else if (prevVector == null && nextVector != null)
{
horRotationAngle = nextHorAngle;
}
Line vertAxis = Line.CreateBound(pt, pt + XYZ.BasisZ);
ElementTransformUtils.RotateElement(massFamDoc, crossSection.Id, vertAxis, horRotationAngle);
#region ЭЛЕМЕНТ НЕ МОЖЕТ БЫТЬ ПОВЕРНУТ В ЭТУ ПОЗИЦИЮ
//? Определить угол поворота в плоскости, перпендикулярной сечению
//XYZ normal = Transform.CreateRotation(XYZ.BasisZ, horRotationAngle).OfVector(XYZ.BasisX);//Нормаль плоскости
//double vertRotationAngle = 0;
//double prevVertAngle = 0;
//double nextVertAngle = 0;
//if (prevVector != null)
//{
// prevVertAngle = XYZ.BasisY.AngleOnPlaneTo(prevVector, normal);
//}
//if (nextVector != null)
//{
// nextVertAngle = XYZ.BasisY.AngleOnPlaneTo(nextVector, normal);
//}
//if (prevVector != null && nextVector != null)
//{
// vertRotationAngle = (prevVertAngle + nextVertAngle) / 2;
//}
//else if (prevVector != null && nextVector == null)
//{
// vertRotationAngle = prevVertAngle;
//}
//else if (prevVector == null && nextVector != null)
//{
// vertRotationAngle = nextVertAngle;
//}
//Line horAxis = Line.CreateBound(pt, pt + normal);
//ElementTransformUtils.RotateElement(massFamDoc, crossSection.Id, horAxis, vertRotationAngle);
#endregion
}
}
tr.Commit();
}
string famSaveDir = doc.PathName;
if (!String.IsNullOrEmpty(famSaveDir))
{
famSaveDir = Path.GetDirectoryName(famSaveDir);
}
else
{
famSaveDir = Environment.GetFolderPath(Environment.SpecialFolder.MyDocuments);
}
targetRfaFullPath = Common.Utils.GetNonExistentFileName(famSaveDir, famName, "rfa");
massFamDoc.SaveAs(targetRfaFullPath);
}
{
//Загрузить семейство формы.
Family family = massFamDoc.LoadFamily(doc);
using (Transaction tr = new Transaction(doc))
{
RCreation.Document crDoc = doc.Create;
tr.Start("Place mass family");
FamilySymbol familySymbol = (FamilySymbol)doc.GetElement(family.GetFamilySymbolIds().First());
//активировать типоразмер
Utils.ActivateFamSym(doc, familySymbol);
//Вставить экземпляр семейства
crDoc.NewFamilyInstance(basePt, familySymbol, StructuralType.NonStructural);
tr.Commit();
}
}
//Удалить сохраненный файл семейства формы
massFamDoc.Close();
if (!String.IsNullOrEmpty(targetRfaFullPath))
{
File.Delete(targetRfaFullPath);
}
//TODO: Открыть загруженное в проект семейство.
//Похоже можно открыть только сохраненное семейство по пути
//uiapp.OpenAndActivateDocument()
}
}
}
}
catch (Autodesk.Revit.Exceptions.OperationCanceledException)
{
}
catch (Exception ex)
{
CommonException(ex, "Ошибка при расстановке поперечных сечений в Revit");
}
return(Result.Succeeded);
}