/// <summary>
/// Добавляем ObjectData-атрибуты к примитиву чертежа
/// </summary>
/// <param name="wid"> ObjectId примитива </param>
/// <param name="wr"> Данные атрибутов </param>
/// <param name="wTbl"> Таблица ObjectData </param>
public void AddAttr(ObjectId wid, Data.MyRecord wr, Autodesk.Gis.Map.ObjectData.Table wTbl)
{
AppServ.Document acDoc = AppServ.Application.DocumentManager.MdiActiveDocument;
using (AppServ.DocumentLock acLckDoc = acDoc.LockDocument())
{
using (Transaction acTrans = acDoc.Database.TransactionManager.StartTransaction())
{
using (Record odRecord = Record.Create())
{
wTbl.InitRecord(odRecord);
FieldDefinition fdef;
Data.FieldValue fval;
for (int i = 0; i < wTbl.FieldDefinitions.Count; i++)
{
fdef = wTbl.FieldDefinitions[i];
fval = wr.SearchField(fdef.Name);
if (fval != null)
{
if (!fval.IsGeom)
{
odRecord[i].Assign(fval.GetString());
}
}
}
wTbl.AddRecord(odRecord, wid);
acTrans.Commit();
}
}
}
}
public static void ShowFrameMenu()
{
AdeskAppSvr.Document doc = AdeskAppSvr.Application.DocumentManager.MdiActiveDocument;
doc.SendStringToExecute("UCS W ", false, false, true);//make current coordinate system to be WCS
AdeskAppSvr.DocumentLock docLock = doc.LockDocument();
DigitalSign mDigital = new DigitalSign();
AdeskAppSvr.Application.ShowModalDialog(mDigital);
docLock.Dispose();
}
/// <summary>
/// show form
/// </summary>
/// <param name="Sender"></param>
/// <param name="e"></param>
public static void ShowFrame(Object Sender, EventArgs e)
{
AdeskAppSvr.Document doc = AdeskAppSvr.Application.DocumentManager.MdiActiveDocument;
doc.SendStringToExecute("UCS W ", false, false, true);//make current coordinate system to be WCS
AdeskAppSvr.DocumentLock docLock = doc.LockDocument();
NewForm mDigital = new NewForm();
AdeskAppSvr.Application.ShowModalDialog(mDigital);
docLock.Dispose();
}
public static void CrateExternalBlock()
{
Editor ed = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
PromptSelectionOptions optSel = new PromptSelectionOptions();
PromptSelectionResult ProSelRes = ed.GetSelection(optSel);
switch (ProSelRes.Status)
{
case PromptStatus.OK:
//Set Block
//Criate blockReference
ObjectId objBlock = criarDefiniçãoDeBloco(ProSelRes.Value.GetObjectIds());
Database db = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Database;
using (Transaction trans = db.TransactionManager.StartTransaction())
{
try
{
Database dbAux = new Database(true, false);
dbAux.SaveAs("C:\\teste1.dwg", DwgVersion.Current);
Autodesk.AutoCAD.ApplicationServices.Document Doc = null;
Doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.Open("C:\\teste1.dwg", false);
ObjectIdCollection ids = new ObjectIdCollection();
ids.Add(objBlock);
using (DocumentLock dl = Doc.LockDocument())
{
IdMapping im = new IdMapping();
db.WblockCloneObjects(
ids,
Doc.Database.BlockTableId,
im,
DuplicateRecordCloning.MangleName,
false
);
}
Doc.CloseAndSave("C:\\teste1.dwg");
}
catch (System.Exception ex)
{
trans.Abort();
return;
}
}
break;
case PromptStatus.Cancel:
//Command Canceled
break;
}
}
public static void PlotRegion()
{
Ap.Document doc = cad.DocumentManager.MdiActiveDocument;
if (doc == null || doc.IsDisposed)
{
return;
}
Ed.Editor ed = doc.Editor;
Db.Database db = doc.Database;
using (doc.LockDocument())
{
Ed.PromptEntityOptions peo = new Ed.PromptEntityOptions(
"\nSelect a region"
);
peo.SetRejectMessage("\nIt is not a region."
);
peo.AddAllowedClass(typeof(Db.Region), false);
Ed.PromptEntityResult per = ed.GetEntity(peo);
if (per.Status != Ed.PromptStatus.OK)
{
ed.WriteMessage("\nCommand canceled.\n");
return;
}
Db.ObjectId regionId = per.ObjectId;
Microsoft.Win32.SaveFileDialog saveFileDialog = new Microsoft.Win32
.SaveFileDialog();
saveFileDialog.Title =
"PDF file name";
saveFileDialog.Filter = "PDF-files|*.pdf";
bool?result = saveFileDialog.ShowDialog();
if (!result.HasValue || !result.Value)
{
ed.WriteMessage("\nCommand canceled.");
return;
}
String pdfFileName = saveFileDialog.FileName;
PlotRegion(regionId, "DWG To PDF.pc3",
"ISO_A4_(210.00_x_297.00_MM)", pdfFileName);
ed.WriteMessage("\nThe \"{0}\" file created.\n", pdfFileName);
}
}
public static ObjectId criarDefiniçãoDeBloco(ObjectId[] objIds)
{
string nomeBloco = "Teste1";
Database db = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Database;
using (Transaction trans = db.TransactionManager.StartTransaction())
{
try
{
Autodesk.AutoCAD.ApplicationServices.Document Doc = null;
Doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument;
using (DocumentLock dl = Doc.LockDocument())
{
//abrir tabela de blocos
BlockTable bt = trans.GetObject(db.BlockTableId, OpenMode.ForWrite) as BlockTable;
//verificar se o bloco já existe
if (bt.Has(nomeBloco))
{
return(bt[nomeBloco]);
}
BlockTableRecord novoBloco = new BlockTableRecord();
novoBloco.Name = nomeBloco;
bt.UpgradeOpen();
bt.Add(novoBloco);
trans.AddNewlyCreatedDBObject(novoBloco, true);
foreach (ObjectId objId in objIds)
{
DBObject obj = trans.GetObject(objId, OpenMode.ForRead);
Entity ent = (Entity)obj;
Entity entClone = ent.Clone() as Entity;
novoBloco.AppendEntity(entClone);
trans.AddNewlyCreatedDBObject(entClone, true);
}
trans.Commit();
return(novoBloco.ObjectId);
}
}
catch (System.Exception ex)
{
trans.Abort();
return(ObjectId.Null);
}
}
}
// This code based on Kean Walmsley's article:
// http://through-the-interface.typepad.com/through_the_interface/2007/10/plotting-a-wind.html
public static void PlotRegion(Db.ObjectId regionId, String pcsFileName,
String mediaName, String outputFileName)
{
if (regionId.IsNull)
{
throw new ArgumentException("regionId.IsNull == true");
}
if (!regionId.IsValid)
{
throw new ArgumentException("regionId.IsValid == false");
}
if (regionId.ObjectClass.Name != "AcDbRegion")
{
throw new ArgumentException("regionId.ObjectClass.Name != AcDbRegion");
}
if (pcsFileName == null)
{
throw new ArgumentNullException("pcsFileName");
}
if (pcsFileName.Trim() == String.Empty)
{
throw new ArgumentException("pcsFileName.Trim() == String.Empty");
}
if (mediaName == null)
{
throw new ArgumentNullException("mediaName");
}
if (mediaName.Trim() == String.Empty)
{
throw new ArgumentException("mediaName.Trim() == String.Empty");
}
if (outputFileName == null)
{
throw new ArgumentNullException("outputFileName");
}
if (outputFileName.Trim() == String.Empty)
{
throw new ArgumentException("outputFileName.Trim() == String.Empty");
}
Db.Database previewDb = Hs.WorkingDatabase;
Db.Database db = null;
Ap.Document doc = cad.DocumentManager.MdiActiveDocument;
if (doc == null || doc.IsDisposed)
{
return;
}
Ed.Editor ed = doc.Editor;
try
{
if (regionId.Database != null && !regionId.Database.IsDisposed)
{
Hs.WorkingDatabase = regionId.Database;
db = regionId.Database;
}
else
{
db = doc.Database;
}
using (doc.LockDocument())
{
using (Db.Transaction tr = db.TransactionManager.StartTransaction())
{
Db.Region region = tr.GetObject(regionId,
Db.OpenMode.ForRead) as Db.Region;
Db.Extents3d extends = region.GeometricExtents;
Db.ObjectId modelId = Us.GetBlockModelSpaceId(db);
Db.BlockTableRecord model = tr.GetObject(modelId,
Db.OpenMode.ForRead) as Db.BlockTableRecord;
Db.Layout layout = tr.GetObject(model.LayoutId,
Db.OpenMode.ForRead) as Db.Layout;
using (Pt.PlotInfo pi = new Pt.PlotInfo())
{
pi.Layout = model.LayoutId;
using (Db.PlotSettings ps = new Db.PlotSettings(layout.ModelType)
)
{
ps.CopyFrom(layout);
Db.PlotSettingsValidator psv = Db.PlotSettingsValidator
.Current;
Gm.Point2d bottomLeft = Gm.Point2d.Origin;
Gm.Point2d topRight = Gm.Point2d.Origin;
region.GetVisualBoundary(0.1, ref bottomLeft,
ref topRight);
Gm.Point3d bottomLeft_3d = new Gm.Point3d(bottomLeft.X,
bottomLeft.Y, 0);
Gm.Point3d topRight_3d = new Gm.Point3d(topRight.X, topRight.Y,
0);
Db.ResultBuffer rbFrom = new Db.ResultBuffer(new Db.TypedValue(
5003, 1));
Db.ResultBuffer rbTo = new Db.ResultBuffer(new Db.TypedValue(
5003, 2));
double[] firres = new double[] { 0, 0, 0 };
double[] secres = new double[] { 0, 0, 0 };
acedTrans(bottomLeft_3d.ToArray(), rbFrom.UnmanagedObject,
rbTo.UnmanagedObject, 0, firres);
acedTrans(topRight_3d.ToArray(), rbFrom.UnmanagedObject,
rbTo.UnmanagedObject, 0, secres);
Db.Extents2d extents = new Db.Extents2d(
firres[0],
firres[1],
secres[0],
secres[1]
);
psv.SetZoomToPaperOnUpdate(ps, true);
psv.SetPlotWindowArea(ps, extents);
psv.SetPlotType(ps, Db.PlotType.Window);
psv.SetUseStandardScale(ps, true);
psv.SetStdScaleType(ps, Db.StdScaleType.ScaleToFit);
psv.SetPlotCentered(ps, true);
psv.SetPlotRotation(ps, Db.PlotRotation.Degrees000);
// We'll use the standard DWF PC3, as
// for today we're just plotting to file
psv.SetPlotConfigurationName(ps, pcsFileName, mediaName);
// We need to link the PlotInfo to the
// PlotSettings and then validate it
pi.OverrideSettings = ps;
Pt.PlotInfoValidator piv = new Pt.PlotInfoValidator();
piv.MediaMatchingPolicy = Pt.MatchingPolicy.MatchEnabled;
piv.Validate(pi);
// A PlotEngine does the actual plotting
// (can also create one for Preview)
if (Pt.PlotFactory.ProcessPlotState == Pt.ProcessPlotState
.NotPlotting)
{
using (Pt.PlotEngine pe = Pt.PlotFactory.CreatePublishEngine()
)
{
// Create a Progress Dialog to provide info
// and allow thej user to cancel
using (Pt.PlotProgressDialog ppd =
new Pt.PlotProgressDialog(false, 1, true))
{
ppd.set_PlotMsgString(
Pt.PlotMessageIndex.DialogTitle, "Custom Plot Progress");
ppd.set_PlotMsgString(
Pt.PlotMessageIndex.CancelJobButtonMessage,
"Cancel Job");
ppd.set_PlotMsgString(
Pt.PlotMessageIndex.CancelSheetButtonMessage,
"Cancel Sheet");
ppd.set_PlotMsgString(
Pt.PlotMessageIndex.SheetSetProgressCaption,
"Sheet Set Progress");
ppd.set_PlotMsgString(
Pt.PlotMessageIndex.SheetProgressCaption,
"Sheet Progress");
ppd.LowerPlotProgressRange = 0;
ppd.UpperPlotProgressRange = 100;
ppd.PlotProgressPos = 0;
// Let's start the plot, at last
ppd.OnBeginPlot();
ppd.IsVisible = true;
pe.BeginPlot(ppd, null);
// We'll be plotting a single document
pe.BeginDocument(pi, doc.Name, null, 1, true,
// Let's plot to file
outputFileName);
// Which contains a single sheet
ppd.OnBeginSheet();
ppd.LowerSheetProgressRange = 0;
ppd.UpperSheetProgressRange = 100;
ppd.SheetProgressPos = 0;
Pt.PlotPageInfo ppi = new Pt.PlotPageInfo();
pe.BeginPage(ppi, pi, true, null);
pe.BeginGenerateGraphics(null);
pe.EndGenerateGraphics(null);
// Finish the sheet
pe.EndPage(null);
ppd.SheetProgressPos = 100;
ppd.OnEndSheet();
// Finish the document
pe.EndDocument(null);
// And finish the plot
ppd.PlotProgressPos = 100;
ppd.OnEndPlot();
pe.EndPlot(null);
}
}
}
else
{
ed.WriteMessage("\nAnother plot is in progress.");
}
}
}
tr.Commit();
}
}
}
finally
{
Hs.WorkingDatabase = previewDb;
}
}