/// <summary>
/// Record to a file until a given dtmf digit in the sequence is received.<br/>
/// Returns -1 on hangup or error.<br/>
/// The format will specify what kind of file will be recorded. The timeout is
/// the maximum record time in milliseconds, or -1 for no timeout. Offset samples
/// is optional, and if provided will seek to the offset without exceeding the
/// end of the file. "maxSilence" is the number of seconds of maxSilence allowed
/// before the function returns despite the lack of dtmf digits or reaching
/// timeout.
/// </summary>
/// <param name="file">the name of the file to stream, must not include extension.</param>
/// <param name="format">the format of the file to be recorded, for example "wav".</param>
/// <param name="escapeDigits">contains the digits that allow the user to end recording.</param>
/// <param name="timeout">the maximum record time in milliseconds, or -1 for no timeout.</param>
/// <param name="offset">the offset samples to skip.</param>
/// <param name="beep">true if a beep should be played before recording.</param>
/// <param name="maxSilence">The amount of silence (in seconds) to allow before returning despite the lack of dtmf digits or reaching timeout.</param>
/// <returns>result code</returns>
protected internal int RecordFile(string file, string format, string escapeDigits, int timeout, int offset, bool beep, int maxSilence)
{
AGIChannel channel = this.Channel;
channel.SendCommand(new Command.RecordFileCommand(file, format, escapeDigits, timeout, offset, beep, maxSilence));
return(channel.LastReply.ResultCode);
}
/// <summary>
/// Plays the given file, allowing playback to be interrupted by the given
/// digits, if any, and allows the listner to control the stream.<br/>
/// If offset is provided then the audio will seek to sample offset before play
/// starts.<br/>
/// Returns 0 if playback completes without a digit being pressed, or the ASCII
/// numerical value of the digit if one was pressed, or -1 on error or if the
/// channel was disconnected. <br/>
/// Remember, the file extension must not be included in the filename.<br/>
/// Available since Asterisk 1.2
/// </summary>
/// <seealso cref="Command.ControlStreamFileCommand"/>
/// <param name="file">the name of the file to stream, must not include extension.</param>
/// <param name="escapeDigits">contains the digits that allow the user to interrupt this command.</param>
/// <returns>result code</returns>
protected internal int ControlStreamFile(string file, string escapeDigits)
{
AGIChannel channel = this.Channel;
channel.SendCommand(new Command.ControlStreamFileCommand(file, escapeDigits));
return(channel.LastReply.ResultCode);
}
/// <summary>
/// Says the given character string, returning early if any of the given DTMF
/// number are received on the channel.
/// </summary>
/// <param name="text">the text to say.</param>
/// <param name="escapeDigits">a String containing the DTMF digits that allow the user to escape.</param>
/// <returns> the DTMF digit pressed or 0x0 if none was pressed.</returns>
protected internal char SayAlpha(string text, string escapeDigits)
{
AGIChannel channel = this.Channel;
channel.SendCommand(new Command.SayAlphaCommand(text, escapeDigits));
return(channel.LastReply.ResultCodeAsChar);
}
/// <summary>
/// Record to a file until a given dtmf digit in the sequence is received.<br/>
/// Returns -1 on hangup or error.<br/>
/// The format will specify what kind of file will be recorded. The timeout is
/// the maximum record time in milliseconds, or -1 for no timeout. Offset samples
/// is optional, and if provided will seek to the offset without exceeding the
/// end of the file. "maxSilence" is the number of seconds of maxSilence allowed
/// before the function returns despite the lack of dtmf digits or reaching
/// timeout.
/// </summary>
/// <param name="file">the name of the file to stream, must not include extension.</param>
/// <param name="format">the format of the file to be recorded, for example "wav".</param>
/// <param name="escapeDigits">contains the digits that allow the user to end recording.</param>
/// <param name="timeout">the maximum record time in milliseconds, or -1 for no timeout.</param>
/// <returns>result code</returns>
protected internal int RecordFile(string file, string format, string escapeDigits, int timeout)
{
AGIChannel channel = this.Channel;
channel.SendCommand(new Command.RecordFileCommand(file, format, escapeDigits, timeout));
return(channel.LastReply.ResultCode);
}
/// <summary>
/// Says the given time in the given format and timezone and allows interruption by one of the given escape digits.<br/>
/// Available since Asterisk 1.2.
/// </summary>
/// <param name="time">the time to say in seconds elapsed since 00:00:00 on January 1, 1970, Coordinated Universal Time (UTC)</param>
/// <param name="escapeDigits">the digits that allow the user to interrupt this command or null for none.</param>
/// <param name="format">the format the time should be said in</param>
/// <param name="timezone">the timezone to use when saying the time, for example "UTC" or "Europe/Berlin".</param>
/// <returns>the DTMF digit pressed or 0x0 if none was pressed.</returns>
protected internal char SayDateTime(long time, string escapeDigits, string format, string timezone)
{
AGIChannel channel = this.Channel;
channel.SendCommand(new Command.SayDateTimeCommand(time, escapeDigits, format, timezone));
return(channel.LastReply.ResultCodeAsChar);
}
/// <summary>
/// Returns the status of the channel.<br/>
/// Return values:
/// <ul>
/// <li>0 Channel is down and available</li>
/// <li>1 Channel is down, but reserved</li>
/// <li>2 Channel is off hook</li>
/// <li>3 Digits (or equivalent) have been dialed</li>
/// <li>4 Line is ringing</li>
/// <li>5 Remote end is ringing</li>
/// <li>6 Line is up</li>
/// <li>7 Line is busy</li>
/// </ul>
/// </summary>
/// <returns> the status of the channel.
/// </returns>
protected internal int GetChannelStatus()
{
AGIChannel channel = this.Channel;
channel.SendCommand(new Command.ChannelStatusCommand());
return(channel.LastReply.ResultCode);
}
/// <summary>
/// Executes the given command.
/// </summary>
/// <param name="application">the name of the application to execute, for example "Dial".</param>
/// <param name="options">the parameters to pass to the application, for example "SIP/123".</param>
/// <returns> the return code of the application of -2 if the application was not found.</returns>
protected internal int Exec(string application, string options)
{
AGIChannel channel = this.Channel;
channel.SendCommand(new Command.ExecCommand(application, options));
return(channel.LastReply.ResultCode);
}
/// <summary>
/// Says the given number, returning early if any of the given DTMF number
/// are received on the channel.
/// </summary>
/// <param name="number">the number to say.</param>
/// <param name="escapeDigits">a String containing the DTMF digits that allow the user to escape.</param>
/// <returns> the DTMF digit pressed or 0x0 if none was pressed.</returns>
protected internal char SayNumber(string number, string escapeDigits)
{
AGIChannel channel = this.Channel;
channel.SendCommand(new Command.SayNumberCommand(number, escapeDigits));
return(channel.LastReply.ResultCodeAsChar);
}
/// <summary>
/// Plays the given file, and waits for the user to press one of the given
/// digits. If none of the esacpe digits is pressed while streaming the file
/// it waits for the specified timeout still waiting for the user to press a
/// digit.
/// </summary>
/// <param name="file">the name of the file to stream, must not include extension.</param>
/// <param name="escapeDigits">contains the digits that the user is expected to press.</param>
/// <param name="timeout">the timeout in seconds to wait if none of the defined esacpe digits was presses while streaming.</param>
/// <returns> the DTMF digit pressed or 0x0 if none was pressed.</returns>
protected internal char GetOption(string file, string escapeDigits, int timeout)
{
AGIChannel channel = this.Channel;
channel.SendCommand(new Command.GetOptionCommand(file, escapeDigits, timeout));
return(channel.LastReply.ResultCodeAsChar);
}
/// <summary>
/// Plays the given file and waits for the user to enter DTMF digits until he
/// presses '#' or the timeout occurs or the maximum number of digits has
/// been entered. The user may interrupt the streaming by starting to enter
/// digits.
/// </summary>
/// <param name="file">the name of the file to play</param>
/// <param name="timeout">the timeout in milliseconds to wait for user input.<br/>
/// 0 means standard timeout value, -1 means "ludicrous time"
/// (essentially never times out).</param>
/// <param name="maxDigits">the maximum number of digits the user is allowed to enter</param>
/// <returns> a String containing the DTMF the user entered</returns>
protected internal string GetData(string file, long timeout, int maxDigits)
{
AGIChannel channel = this.Channel;
channel.SendCommand(new Command.GetDataCommand(file, timeout, maxDigits));
return(channel.LastReply.GetResult());
}
/// <summary>
/// Plays the given file and waits for the user to enter DTMF digits until he
/// presses '#'. The user may interrupt the streaming by starting to enter
/// digits.
/// </summary>
/// <param name="file">the name of the file to play</param>
/// <returns> a String containing the DTMF the user entered</returns>
protected internal string GetData(string file)
{
AGIChannel channel = this.Channel;
channel.SendCommand(new Command.GetDataCommand(file));
return(channel.LastReply.GetResult());
}
/// <summary>
/// Plays the given file, allowing playback to be interrupted by the given
/// digits, if any, and allows the listner to control the stream.<br/>
/// If offset is provided then the audio will seek to sample offset before play
/// starts.<br/>
/// Returns 0 if playback completes without a digit being pressed, or the ASCII
/// numerical value of the digit if one was pressed, or -1 on error or if the
/// channel was disconnected. <br/>
/// Remember, the file extension must not be included in the filename.<br/>
/// Available since Asterisk 1.2
/// </summary>
/// <seealso cref="Command.ControlStreamFileCommand"/>
/// <param name="file">the name of the file to stream, must not include extension.</param>
/// <param name="escapeDigits">contains the digits that allow the user to interrupt this command.</param>
/// <param name="offset">the offset samples to skip before streaming.</param>
/// <param name="forwardDigit">the digit for fast forward.</param>
/// <param name="rewindDigit">the digit for rewind.</param>
/// <param name="pauseDigit">the digit for pause and unpause.</param>
/// <returns>result code</returns>
protected internal int ControlStreamFile(string file, string escapeDigits, int offset, string forwardDigit, string rewindDigit, string pauseDigit)
{
AGIChannel channel = this.Channel;
channel.SendCommand(new Command.ControlStreamFileCommand(file, escapeDigits, offset, forwardDigit, rewindDigit, pauseDigit));
return(channel.LastReply.ResultCode);
}
/// <summary>
/// Waits up to 'timeout' milliseconds to receive a DTMF digit.
/// </summary>
/// <param name="timeout">timeout the milliseconds to wait for the channel to receive a DTMF digit, -1 will wait forever.</param>
/// <returns> the DTMF digit pressed or 0x0 if none was pressed.</returns>
protected internal char WaitForDigit(int timeout)
{
AGIChannel channel = this.Channel;
channel.SendCommand(new Command.WaitForDigitCommand(timeout));
return(channel.LastReply.ResultCodeAsChar);
}
/// <summary>
/// Retrieves an entry in the Asterisk database for a given family and key.
/// </summary>
/// <param name="family">the family of the entry to retrieve.</param>
/// <param name="key">key the key of the entry to retrieve.</param>
/// <return>the value of the given family and key or null if there is no such value.</return>
protected internal string DatabaseGet(string family, string key)
{
AGIChannel channel = this.Channel;
channel.SendCommand(new Command.DatabaseGetCommand(family, key));
if (channel.LastReply.ResultCode != 1)
{
return(null);
}
return(channel.LastReply.Extra);
}
/// <summary>
/// Returns the value of the given channel variable.<br/>
/// Available since Asterisk 1.2.
/// </summary>
/// <param name="name">the name of the variable to retrieve.</param>
/// <param name="channel">the name of the channel.</param>
/// <returns>the value of the given variable or null if not set.</returns>
protected internal string GetFullVariable(string name, string channelName)
{
AGIChannel channel = this.Channel;
channel.SendCommand(new Command.GetFullVariableCommand(name, channelName));
if (channel.LastReply.ResultCode != 1)
{
return(null);
}
return(channel.LastReply.Extra);
}
public abstract void Service(AGIRequest param1, AGIChannel param2);
public void Run()
{
try
{
var reader = new AGIReader(socket);
var writer = new AGIWriter(socket);
AGIRequest request = reader.ReadRequest();
//Added check for when the request is empty
//eg. telnet to the service
if (request.Request.Count > 0)
{
var channel = new AGIChannel(writer, reader, _SC511_CAUSES_EXCEPTION, _SCHANGUP_CAUSES_EXCEPTION);
AGIScript script = mappingStrategy.DetermineScript(request);
Thread.SetData(_channel, channel);
if (script != null)
{
#if LOGGER
logger.Info("Begin AGIScript " + script.GetType().FullName + " on " + Thread.CurrentThread.Name);
#endif
script.Service(request, channel);
#if LOGGER
logger.Info("End AGIScript " + script.GetType().FullName + " on " + Thread.CurrentThread.Name);
#endif
}
else
{
var error = "No script configured for URL '" + request.RequestURL + "' (script '" + request.Script +
"')";
channel.SendCommand(new VerboseCommand(error, 1));
#if LOGGER
logger.Error(error);
#endif
}
}
else
{
var error = "A connection was made with no requests";
#if LOGGER
logger.Error(error);
#endif
}
}
catch (AGIHangupException)
{
}
catch (IOException)
{
}
catch (AGIException ex)
{
#if LOGGER
logger.Error("AGIException while handling request", ex);
#else
throw ex;
#endif
}
catch (Exception ex)
{
#if LOGGER
logger.Error("Unexpected Exception while handling request", ex);
#else
throw ex;
#endif
}
Thread.SetData(_channel, null);
try
{
socket.Close();
}
#if LOGGER
catch (IOException ex)
{
logger.Error("Error on close socket", ex);
}
#else
catch { }
#endif
}
