public override object Clone()
{
StepAndRepeatCmdLine stepAndRepeatCmdLine = MemberwiseClone() as StepAndRepeatCmdLine;
stepAndRepeatCmdLine.Origin = Origin.Clone() as PointD;
stepAndRepeatCmdLine.HorizontalEnd = HorizontalEnd.Clone() as PointD;
stepAndRepeatCmdLine.VerticalEnd = VerticalEnd.Clone() as PointD;
stepAndRepeatCmdLine.DoCmdLineList = new List <DoCmdLine>();
foreach (DoCmdLine doCmdLine in DoCmdLineList)
{
stepAndRepeatCmdLine.DoCmdLineList.Add(doCmdLine.Clone() as DoCmdLine);
}
return(stepAndRepeatCmdLine);
}
/// <summary>
/// 解析指令
/// 注意： 传递的实际原点坐标值，是引用当前模块的指令（DO, DO MULTIPASS)里面的坐标值；如果当前模块是FluidProgram，则原点值为(0, 0)
/// </summary>
/// <param name="origin">当前模块实际原点坐标</param>
/// <param name="parent">包含当前模块的外层模块, 一个模块解析后对应的是RunnableModule类型，所以parent类型是RunnableModule</param>
/// <param name="level">当前模块所处的层级，Program为0,Workpiece为1，以此类推</param>
/// <returns>解析结果. 如果解析成功，携带对应的RunnableModule；如果解析失败，携带出错行CmdLine、出错描述信息</returns>
private Result parse(CommandsModule commandsModule, PointD origin, RunnableModule parent, int level, int boardNo)
{
Pattern currPattern = commandsModule as Pattern;
RunnableModule runnableModule = new RunnableModule(commandsModule, origin);
runnableModule.BoardNo = boardNo;
// workpiece下面所有拼版根据因引用的Do指令或DoMultiPass指令的Valve设定拼版
if (level == 2)
{
runnableModule.Valve = (commandsModule as Pattern).Valve;
if (runnableModule.Valve == Drive.ValveSystem.ValveType.Valve1)
{
runnableModule.Mode = ModuleMode.AssignMode1;
runnableModule.SaveMode = ModuleMode.AssignMode1;
}
else if (runnableModule.Valve == Drive.ValveSystem.ValveType.Valve2)
{
runnableModule.Mode = ModuleMode.AssignMode2;
runnableModule.SaveMode = ModuleMode.AssignMode2;
}
else if (runnableModule.Valve == Drive.ValveSystem.ValveType.Both)
{
runnableModule.Mode = ModuleMode.DualFallow;
runnableModule.SaveMode = ModuleMode.DualFallow;
}
}
if (level > 2)
{
runnableModule.Valve = parent.Valve;
runnableModule.Mode = parent.Mode;
runnableModule.SaveMode = parent.SaveMode;
}
program.ModuleStructure.AddModule(runnableModule, parent, level);
// 是否已经遇到END:
bool ended = false;
// 记录当前处在什么类型的子句中，例如：loop block, pass block
BlockState blockState = new BlockState();
// 开始解析：
List <CmdLine> cmdLineList;
cmdLineList = new List <CmdLine>(commandsModule.CmdLineList);
CmdLine cmdLine = null;
bool hasPassBlock = false;
int lastPassblockIndex = -1;
MeasureHeightCmd curMeasureHeightCmd = null;
//增加螺杆阀的速度、重量键值对
Dictionary <int, double> svValvespeedDic = new Dictionary <int, double>();
//TODO 将5换为阀参数设置的默认值,10换为默认值
svValvespeedDic.Add(5, 10);
for (int i = 0; i < cmdLineList.Count; i++)
{
cmdLine = cmdLineList[i];
// 忽略被禁用的命令
if (!cmdLine.Enabled)
{
continue;
}
// END: 后面不允许添加任何命令
if (ended)
{
return(new Result(false, cmdLine, "No commands is allowed to be added after END"));
}
if (cmdLine is SetHeightSenseModeCmdLine)
{
runnableModule.AddCommand(new SetHeightSenseModeCmd(runnableModule, cmdLine as SetHeightSenseModeCmdLine));
}
else if (cmdLine is MarkCmdLine)
{
// Mark点命令必须处在最前面
if (i > 0)
{
// 寻找Mark点前面的Enable==true且不是注释的命令
CmdLine lastestCmdLine = getLastestEnabledCmdLine(cmdLineList, i - 1);
if (lastestCmdLine != null && !(lastestCmdLine is MarkCmdLine))
{
return(new Result(false, cmdLine, "MARK must be added before the other command types."));
}
}
if (findMarkCmdLineIndex(cmdLineList, cmdLine as MarkCmdLine) > 1)
{
return(new Result(false, cmdLine, "MARK number can not be more than 2."));
}
MarkCmd markCmd = new MarkCmd(runnableModule, cmdLine as MarkCmdLine);
runnableModule.AddCommand(markCmd);
program.ModuleStructure.RecordMarkPoint(runnableModule, markCmd);
}
else if (cmdLine is BadMarkCmdLine)
{
//// 屏蔽原因 : BadMark模式由每个拼版只有一个 改为 测高指令那种模式
//// BadMark点命令必须处在非Mark命令的前面
//if (i > 0)
//{
// // 寻找Bad Mark点前面的Enable==true且不是注释的命令
// CmdLine lastestCmdLine = getLastestEnabledCmdLine(cmdLineList, i - 1);
// if (lastestCmdLine != null && !(lastestCmdLine is MarkCmdLine))
// {
// // 当前指令前面有非Mark指令，判断是否是BadMark，每个pattern只能添加一个BadMark
// if (lastestCmdLine is BadMarkCmdLine)
// {
// return new Result(false, cmdLine, "Only one BADMARK command can be added per pattern");
// }
// else
// {
// return new Result(false, cmdLine, "BADMARK must be added before the non-mark command types.");
// }
// }
//}
BadMarkCmd badMarkCmd = new BadMarkCmd(runnableModule, cmdLine as BadMarkCmdLine);
runnableModule.AddCommand(badMarkCmd);
program.ModuleStructure.RecordBadMarkPoint(runnableModule, badMarkCmd);
}
else if (cmdLine is MeasureCmdLine)
{
MeasureCmd measureCmd = new MeasureCmd(runnableModule, cmdLine as MeasureCmdLine);
runnableModule.AddCommand(measureCmd);
//记录检测指令里的测高
program.ModuleStructure.RecordMeasureGlueHTCmds(runnableModule, measureCmd);
}
else if (cmdLine is BlobsCmdLine)
{
BlobsCmd blobsCmd = new BlobsCmd(runnableModule, cmdLine as BlobsCmdLine);
runnableModule.AddCommand(blobsCmd);
program.ModuleStructure.RecordBlobsCmds(runnableModule, blobsCmd);
}
else if (cmdLine is BarcodeCmdLine)
{
BarcodeCmd barcodeCmd = new BarcodeCmd(runnableModule, cmdLine as BarcodeCmdLine);
runnableModule.AddCommand(barcodeCmd);
program.ModuleStructure.RecordBarcodeCmds(runnableModule, barcodeCmd);
}
else if (cmdLine is ConveyorBarcodeCmdLine)
{
ConveyorBarcodeCmd conveyorBarcodeCmd = new ConveyorBarcodeCmd(runnableModule, cmdLine as ConveyorBarcodeCmdLine);
runnableModule.AddCommand(conveyorBarcodeCmd);
}
else if (cmdLine is MeasureHeightCmdLine)
{
MeasureHeightCmdLine measureHeightCmdLine = cmdLine as MeasureHeightCmdLine;
curMeasureHeightCmd = new MeasureHeightCmd(runnableModule, measureHeightCmdLine);
runnableModule.AddCommand(curMeasureHeightCmd);
program.ModuleStructure.RecordMeasureHeightPoint(runnableModule, curMeasureHeightCmd);
}
else if (cmdLine is NozzleCheckCmdLine)
{
if (level > 1)
{
cmdLine.Valve = runnableModule.Valve;
}
runnableModule.AddCommand(new NozzleCheckCmd(runnableModule, cmdLine as NozzleCheckCmdLine, curMeasureHeightCmd));
}
else if (cmdLine is SymbolLinesCmdLine)
{
if (level > 1)
{
cmdLine.Valve = runnableModule.Valve;
}
SymbolLinesCmdLine symbolLinesCmdLine = cmdLine as SymbolLinesCmdLine;
SymbolLinesCmd symbolLinesCmd = new SymbolLinesCmd(runnableModule, symbolLinesCmdLine);
runnableModule.AddCommand(symbolLinesCmd);
foreach (MeasureHeightCmd item in symbolLinesCmd.GetAllMeasureCmdLineList())
{
if (item == null)
{
continue;
}
program.ModuleStructure.RecordMeasureHeightPoint(runnableModule, item);
}
program.ModuleStructure.RecordSymbolLinesCmd(runnableModule, symbolLinesCmd);
}
else if (cmdLine is MultiTracesCmdLine)
{
if (level > 1)
{
cmdLine.Valve = runnableModule.Valve;
}
runnableModule.AddCommand(new MultiTracesCmd(runnableModule, cmdLine as MultiTracesCmdLine, curMeasureHeightCmd));
}
else if (cmdLine is DotCmdLine)
{
if (level > 1)
{
cmdLine.Valve = runnableModule.Valve;
}
runnableModule.AddCommand(new DotCmd(runnableModule, cmdLine as DotCmdLine, curMeasureHeightCmd));
}
else if (cmdLine is FinishShotCmdLine)
{
if (level > 1)
{
cmdLine.Valve = runnableModule.Valve;
}
runnableModule.AddCommand(new FinishShotCmd(runnableModule, cmdLine as FinishShotCmdLine, curMeasureHeightCmd));
}
else if (cmdLine is LineCmdLine) // 包含了 cmdLine is SnakeLineCmdLine
{
if (level > 1)
{
cmdLine.Valve = runnableModule.Valve;
}
runnableModule.AddCommand(new LineCmd(runnableModule, cmdLine as LineCmdLine, curMeasureHeightCmd));
}
else if (cmdLine is ArcCmdLine) // 包含了 CircleCmdLine
{
if (level > 1)
{
cmdLine.Valve = runnableModule.Valve;
}
runnableModule.AddCommand(new ArcCmd(runnableModule, cmdLine as ArcCmdLine, curMeasureHeightCmd));
}
else if (cmdLine is CircleCmdLine)
{
if (level > 1)
{
cmdLine.Valve = runnableModule.Valve;
}
runnableModule.AddCommand(new ArcCmd(runnableModule, cmdLine as CircleCmdLine, curMeasureHeightCmd));
}
else if (cmdLine is MoveXyCmdLine)
{
runnableModule.AddCommand(new MoveXyCmd(runnableModule, cmdLine as MoveXyCmdLine));
}
else if (cmdLine is MoveAbsXyCmdLine)
{
runnableModule.AddCommand(new MoveAbsXyCmd(runnableModule, cmdLine as MoveAbsXyCmdLine));
}
else if (cmdLine is MoveAbsZCmdLine)
{
runnableModule.AddCommand(new MoveAbsZCmd(runnableModule, cmdLine as MoveAbsZCmdLine));
}
else if (cmdLine is MoveToLocationCmdLine)
{
MoveToLocationCmdLine moveToLocationCmdLine = cmdLine as MoveToLocationCmdLine;
// 检测系统预定义坐标名称是否存在
if (runnableModule.CommandsModule.program.UserPositions.Find(x => x.Name == moveToLocationCmdLine.PositionName) == null)
{
return(new Result(false, cmdLine, "\'" + moveToLocationCmdLine.PositionName + "\' is not defined in system."));
}
runnableModule.AddCommand(new MoveToLocationCmd(runnableModule, moveToLocationCmdLine));
}
else if (cmdLine is NormalTimerCmdLine)
{
// TIMER不能放在pass block里面
if (blockState.Type == BlockType.PASS_BLOCK)
{
return(new Result(false, cmdLine, "TIMER must not be added in pass block"));
}
runnableModule.AddCommand(new NormalTimerCmd(runnableModule, cmdLine as NormalTimerCmdLine));
}
else if (cmdLine is TimerCmdLine)
{
// TIMER必须在pass block里面
if (blockState.Type != BlockType.PASS_BLOCK)
{
return(new Result(false, cmdLine, "TIMER must be added in pass block"));
}
// TIMER必须是END PASS的前一个命令行，也就是说TIMER必须是分组内的最后一个命令行
if (i >= cmdLineList.Count - 1 || !(cmdLineList[i + 1] is EndPassCmdLine))
{
return(new Result(false, cmdLine, "TIMER must be added before END PASS."));
}
//// TIMER不能放在最后一个分组中，无意义
//if (i + 2 <= cmdLineList.Count - 1 && !(cmdLineList[i + 2] is StartPassCmdLine))
//{
// return new Result(false, cmdLine, "TIMER is no need to be added in the last pass block.");
//}
runnableModule.AddCommand(new TimerCmd(runnableModule, cmdLine as TimerCmdLine));
}
else if (cmdLine is StepAndRepeatCmdLine)
{
StepAndRepeatCmdLine stepAndRepeatCmdLine = cmdLine as StepAndRepeatCmdLine;
Pattern pattern = program.GetPatternByName(stepAndRepeatCmdLine.PatternName);
if (pattern == null)
{
return(new Result(false, cmdLine, "Pattern '" + stepAndRepeatCmdLine.PatternName + "' is not found."));
}
if (pattern.HasPassBlocks)
{
return(new Result(false, cmdLine, "Pattern '" + pattern.Name + "' can not contain pass blocks."));
}
if (pattern.IsContainItself)
{
return(new Result(false, cmdLine, "Pattern '" + pattern.Name + "' can not contain itself."));
}
cmdLineList.InsertRange(i + 1, (cmdLine as StepAndRepeatCmdLine).DoCmdLineList);
}
else if (cmdLine is DoCmdLine)
{
DoCmdLine doCmdLine = cmdLine as DoCmdLine;
Pattern pattern = program.GetPatternByName(doCmdLine.PatternName);
if (pattern == null)
{
return(new Result(false, cmdLine, "Pattern '" + doCmdLine.PatternName + "' is not found."));
}
//设置父级Pattern，建立Pattern的引用关系
pattern.ParentPattern = currPattern;
currPattern?.AddChild(pattern);
Logger.DEFAULT.Debug(this.GetType().Name, string.Format("{0}'s parent pattern is {1}", pattern.Name, currPattern?.Name));
if (pattern.HasPassBlocks)
{
return(new Result(false, cmdLine, "Pattern '" + pattern.Name + "' can not contain pass blocks."));
}
if (pattern.Name == commandsModule.Name)
{
return(new Result(false, cmdLine, "Pattern '" + pattern.Name + "' can not contain itself."));
}
if (checkExitInAncestorNode(pattern, runnableModule))
{
return(new Result(false, cmdLine, "Pattern '" + pattern.Name + "' can not contain itself."));
}
pattern.Valve = doCmdLine.Valve;
//倒序
if (doCmdLine.Reverse)
{
pattern = pattern.ReversePattern();
}
if (level > 0)
{
if (runnableModule.BoardNo != 0)
{
doCmdLine.BoardNo = runnableModule.BoardNo;
}
program.ModuleStructure.AddBoardNo(doCmdLine.BoardNo);
}
Result result = parse(pattern, doCmdLine.Origin, runnableModule, level + 1, doCmdLine.BoardNo);
if (!result.IsOk)
{
return(result);
}
// 拼版穴位号逻辑
(result.Param as RunnableModule).BoardNo = doCmdLine.BoardNo;
runnableModule.AddCommand(new DoCmd(runnableModule, result.Param as RunnableModule, curMeasureHeightCmd));
}
else if (cmdLine is DoMultiPassCmdLine)
{
if (blockState.Type != BlockType.LOOP_BLOCK)
{
return(new Result(false, cmdLine, "DO MULTIPASS must be added in loop block."));
}
DoMultiPassCmdLine doMultiPassCmdLine = cmdLine as DoMultiPassCmdLine;
Pattern pattern = program.GetPatternByName(doMultiPassCmdLine.PatternName);
//设置父级Pattern，建立Pattern的引用关系
pattern.ParentPattern = currPattern;
if (pattern == null)
{
return(new Result(false, cmdLine, "Pattern '" + doMultiPassCmdLine.PatternName + "' is not found."));
}
currPattern?.AddChild(pattern);
Logger.DEFAULT.Debug(this.GetType().Name, string.Format("{0}'s parent pattern is {1}", pattern.Name, currPattern?.Name));
if (pattern.IsContainItself)
{
return(new Result(false, cmdLine, "Pattern '" + pattern.Name + "' can not contain itself."));
}
pattern.Valve = doMultiPassCmdLine.Valve;
if (level > 0)
{
if (runnableModule.BoardNo != 0)
{
doMultiPassCmdLine.BoardNo = runnableModule.BoardNo;
}
program.ModuleStructure.AddBoardNo(doMultiPassCmdLine.BoardNo);
}
Result result = parse(pattern, doMultiPassCmdLine.Origin, runnableModule, level + 1, doMultiPassCmdLine.BoardNo);
if (!result.IsOk)
{
return(result);
}
if (!pattern.HasPassBlocks)
{
return(new Result(false, cmdLine, "Pattern '" + doMultiPassCmdLine.PatternName + "' has no pass blocks."));
}
// 拼版穴位号逻辑
(result.Param as RunnableModule).BoardNo = doMultiPassCmdLine.BoardNo;
// 此处先暂时添加在cmdList中，在结尾处，对处于子句中的语句，集中处理。
runnableModule.AddCommand(new DoMultipassCmd(runnableModule, result.Param as RunnableModule, curMeasureHeightCmd));
}
else if (cmdLine is LoopPassCmdLine)
{
if (blockState.Type != BlockType.NONE)
{
return(new Result(false, cmdLine, blockState.NoEndDescription));
}
blockState.Type = BlockType.LOOP_BLOCK;
blockState.BlockCmdObj = new LoopBlockCmd(runnableModule, cmdLine as LoopPassCmdLine);
}
else if (cmdLine is NextLoopCmdLine)
{
if (blockState.Type != BlockType.LOOP_BLOCK)
{
return(new Result(false, cmdLine, "LOOP PASS is not found for the loop block."));
}
//不同拼版的同一个分组只需要一个计时器，不需要每个拼版都记一次时间
LoopBlockCmd loopBlockCmd = blockState.BlockCmdObj as LoopBlockCmd;
for (int doMultiPassCmdIndex = 1; doMultiPassCmdIndex < loopBlockCmd.DoMultipassCmdList.Count; doMultiPassCmdIndex++)
{
RunnableModule tempModule = loopBlockCmd.DoMultipassCmdList[doMultiPassCmdIndex].AssociatedRunnableModule;
foreach (Command item in tempModule.CmdList)
{
if (item is PassBlockCmd)
{
(item as PassBlockCmd).CmdList.RemoveAll(data => data is TimerCmd);
}
}
}
runnableModule.AddCommand(blockState.BlockCmdObj as LoopBlockCmd);
blockState.Reset();
}
else if (cmdLine is StartPassCmdLine)
{
if (blockState.Type != BlockType.NONE)
{
return(new Result(false, cmdLine, blockState.NoEndDescription));
}
// 当前pass block序号必须比上一个pass block序号大
if ((cmdLine as StartPassCmdLine).Index <= lastPassblockIndex)
{
return(new Result(false, cmdLine, "Current pass block index must be bigger than the previous."));
}
// 相邻pass block之间不允许添加指令
if (hasPassBlock && !(cmdLineList[i - 1] is EndPassCmdLine))
{
return(new Result(false, cmdLine, "No commands is allowed to be added between pass blocks."));
}
blockState.Type = BlockType.PASS_BLOCK;
blockState.BlockCmdObj = new PassBlockCmd(runnableModule, cmdLine as StartPassCmdLine);
}
else if (cmdLine is EndPassCmdLine)
{
if (blockState.Type != BlockType.PASS_BLOCK)
{
return(new Result(false, cmdLine, "START PASS is not found for the pass block"));
}
PassBlockCmd passBlockCmd = blockState.BlockCmdObj as PassBlockCmd;
runnableModule.AddCommand(passBlockCmd);
hasPassBlock = true;
lastPassblockIndex = passBlockCmd.Index;
blockState.Reset();
}
else if (cmdLine is EndCmdLine)
{
ended = true;
}
else if (cmdLine is PurgeCmdLine)
{
if (commandsModule is Pattern)
{
cmdLine.Valve = (commandsModule as Pattern).Valve;
}
runnableModule.AddCommand(new PurgeCmd(runnableModule, cmdLine as PurgeCmdLine));
}
else if (cmdLine is ChangeSpeedCmdLine)
{
ChangeSpeedCmdLine changeSpeedCmdLine = cmdLine as ChangeSpeedCmdLine;
if (svValvespeedDic.ContainsKey(changeSpeedCmdLine.Speed))
{
}
else if (this.program.RuntimeSettings.VavelSpeedDic.ContainsKey(changeSpeedCmdLine.Speed))
{
double value;
this.program.RuntimeSettings.VavelSpeedDic.TryGetValue(changeSpeedCmdLine.Speed, out value);
svValvespeedDic.Add(changeSpeedCmdLine.Speed, value);
}
else
{
//TODO 将10替换为默认参数
svValvespeedDic.Add(changeSpeedCmdLine.Speed, 10);
}
runnableModule.AddCommand(new ChangeSpeedCmd(runnableModule, changeSpeedCmdLine));
//传递程序中的速度重量键值对
SvOrGearValveSpeedWeightValve.VavelSpeedWeightDic = FluidProgram.CurrentOrDefault().RuntimeSettings.VavelSpeedDic;
}
// 处理包含在子句中的语句：
if (blockState.Type != BlockType.NONE && runnableModule.CmdList.Count > 0)
{
switch (blockState.Type)
{
case BlockType.LOOP_BLOCK:
if (!(cmdLine is LoopPassCmdLine))
{
if (!(cmdLine is DoMultiPassCmdLine))
{
return(new Result(false, cmdLine, "Only DO MULTIPASS can be added in loop block."));
}
(blockState.BlockCmdObj as LoopBlockCmd).DoMultipassCmdList.Add(runnableModule.GetCommandAtTail() as DoMultipassCmd);
runnableModule.RemoveCommandAtTail();
}
break;
case BlockType.PASS_BLOCK:
if (!(cmdLine is StartPassCmdLine))
{
(blockState.BlockCmdObj as PassBlockCmd).CmdList.Add(runnableModule.GetCommandAtTail());
runnableModule.RemoveCommandAtTail();
}
break;
}
}
}
//替换Program中的SvValveDic
this.program.RuntimeSettings.VavelSpeedDic = svValvespeedDic;
var lastCmdLine = getLastestEnabledCmdLine(cmdLineList, cmdLineList.Count - 1);
// 检查子句命令是否完成
if (blockState.Type != BlockType.NONE)
{
return(new Result(false, lastCmdLine, blockState.NoEndDescription));
}
// 必须以END命令结尾
if (!ended)
{
return(new Result(false, lastCmdLine, "END is not found."));
}
return(new Result(true, runnableModule));
}