/*************************************************************************
* Least squares fitting by polynomial.
*
* This subroutine is "lightweight" alternative for more complex and feature-
* rich PolynomialFitWC(). See PolynomialFitWC() for more information about
* subroutine parameters (we don't duplicate it here because of length)
*
* -- ALGLIB PROJECT --
* Copyright 12.10.2009 by Bochkanov Sergey
*************************************************************************/
public static void polynomialfit(ref double[] x,
ref double[] y,
int n,
int m,
ref int info,
ref ratint.barycentricinterpolant p,
ref polynomialfitreport rep)
{
int i = 0;
double[] w = new double[0];
double[] xc = new double[0];
double[] yc = new double[0];
int[] dc = new int[0];
if (n > 0)
{
w = new double[n];
for (i = 0; i <= n - 1; i++)
{
w[i] = 1;
}
}
polynomialfitwc(x, y, ref w, n, xc, yc, ref dc, 0, m, ref info, ref p, ref rep);
}
/*************************************************************************
Weighted fitting by polynomials in barycentric form, with constraints on
function values or first derivatives.
Small regularizing term is used when solving constrained tasks (to improve
stability).
Task is linear, so linear least squares solver is used. Complexity of this
computational scheme is O(N*M^2), mostly dominated by least squares solver
SEE ALSO:
PolynomialFit()
INPUT PARAMETERS:
X - points, array[0..N-1].
Y - function values, array[0..N-1].
W - weights, array[0..N-1]
Each summand in square sum of approximation deviations from
given values is multiplied by the square of corresponding
weight. Fill it by 1's if you don't want to solve weighted
task.
N - number of points, N>0.
* if given, only leading N elements of X/Y/W are used
* if not given, automatically determined from sizes of X/Y/W
XC - points where polynomial values/derivatives are constrained,
array[0..K-1].
YC - values of constraints, array[0..K-1]
DC - array[0..K-1], types of constraints:
* DC[i]=0 means that P(XC[i])=YC[i]
* DC[i]=1 means that P'(XC[i])=YC[i]
SEE BELOW FOR IMPORTANT INFORMATION ON CONSTRAINTS
K - number of constraints, 0<=K<M.
K=0 means no constraints (XC/YC/DC are not used in such cases)
M - number of basis functions (= polynomial_degree + 1), M>=1
OUTPUT PARAMETERS:
Info- same format as in LSFitLinearW() subroutine:
* Info>0 task is solved
* Info<=0 an error occured:
-4 means inconvergence of internal SVD
-3 means inconsistent constraints
P - interpolant in barycentric form.
Rep - report, same format as in LSFitLinearW() subroutine.
Following fields are set:
* RMSError rms error on the (X,Y).
* AvgError average error on the (X,Y).
* AvgRelError average relative error on the non-zero Y
* MaxError maximum error
NON-WEIGHTED ERRORS ARE CALCULATED
IMPORTANT:
this subroitine doesn't calculate task's condition number for K<>0.
NOTES:
you can convert P from barycentric form to the power or Chebyshev
basis with PolynomialBar2Pow() or PolynomialBar2Cheb() functions from
POLINT subpackage.
SETTING CONSTRAINTS - DANGERS AND OPPORTUNITIES:
Setting constraints can lead to undesired results, like ill-conditioned
behavior, or inconsistency being detected. From the other side, it allows
us to improve quality of the fit. Here we summarize our experience with
constrained regression splines:
* even simple constraints can be inconsistent, see Wikipedia article on
this subject: http://en.wikipedia.org/wiki/Birkhoff_interpolation
* the greater is M (given fixed constraints), the more chances that
constraints will be consistent
* in the general case, consistency of constraints is NOT GUARANTEED.
* in the one special cases, however, we can guarantee consistency. This
case is: M>1 and constraints on the function values (NOT DERIVATIVES)
Our final recommendation is to use constraints WHEN AND ONLY when you
can't solve your task without them. Anything beyond special cases given
above is not guaranteed and may result in inconsistency.
-- ALGLIB PROJECT --
Copyright 10.12.2009 by Bochkanov Sergey
*************************************************************************/
public static void polynomialfitwc(double[] x,
double[] y,
double[] w,
int n,
double[] xc,
double[] yc,
int[] dc,
int k,
int m,
ref int info,
ratint.barycentricinterpolant p,
polynomialfitreport rep)
{
double xa = 0;
double xb = 0;
double sa = 0;
double sb = 0;
double[] xoriginal = new double[0];
double[] yoriginal = new double[0];
double[] y2 = new double[0];
double[] w2 = new double[0];
double[] tmp = new double[0];
double[] tmp2 = new double[0];
double[] bx = new double[0];
double[] by = new double[0];
double[] bw = new double[0];
int i = 0;
int j = 0;
double u = 0;
double v = 0;
double s = 0;
int relcnt = 0;
lsfitreport lrep = new lsfitreport();
x = (double[])x.Clone();
y = (double[])y.Clone();
w = (double[])w.Clone();
xc = (double[])xc.Clone();
yc = (double[])yc.Clone();
info = 0;
alglib.ap.assert(n>0, "PolynomialFitWC: N<=0!");
alglib.ap.assert(m>0, "PolynomialFitWC: M<=0!");
alglib.ap.assert(k>=0, "PolynomialFitWC: K<0!");
alglib.ap.assert(k<m, "PolynomialFitWC: K>=M!");
alglib.ap.assert(alglib.ap.len(x)>=n, "PolynomialFitWC: Length(X)<N!");
alglib.ap.assert(alglib.ap.len(y)>=n, "PolynomialFitWC: Length(Y)<N!");
alglib.ap.assert(alglib.ap.len(w)>=n, "PolynomialFitWC: Length(W)<N!");
alglib.ap.assert(alglib.ap.len(xc)>=k, "PolynomialFitWC: Length(XC)<K!");
alglib.ap.assert(alglib.ap.len(yc)>=k, "PolynomialFitWC: Length(YC)<K!");
alglib.ap.assert(alglib.ap.len(dc)>=k, "PolynomialFitWC: Length(DC)<K!");
alglib.ap.assert(apserv.isfinitevector(x, n), "PolynomialFitWC: X contains infinite or NaN values!");
alglib.ap.assert(apserv.isfinitevector(y, n), "PolynomialFitWC: Y contains infinite or NaN values!");
alglib.ap.assert(apserv.isfinitevector(w, n), "PolynomialFitWC: X contains infinite or NaN values!");
alglib.ap.assert(apserv.isfinitevector(xc, k), "PolynomialFitWC: XC contains infinite or NaN values!");
alglib.ap.assert(apserv.isfinitevector(yc, k), "PolynomialFitWC: YC contains infinite or NaN values!");
for(i=0; i<=k-1; i++)
{
alglib.ap.assert(dc[i]==0 || dc[i]==1, "PolynomialFitWC: one of DC[] is not 0 or 1!");
}
//
// Scale X, Y, XC, YC.
// Solve scaled problem using internal Chebyshev fitting function.
//
lsfitscalexy(ref x, ref y, ref w, n, ref xc, ref yc, dc, k, ref xa, ref xb, ref sa, ref sb, ref xoriginal, ref yoriginal);
internalchebyshevfit(x, y, w, n, xc, yc, dc, k, m, ref info, ref tmp, lrep);
if( info<0 )
{
return;
}
//
// Generate barycentric model and scale it
// * BX, BY store barycentric model nodes
// * FMatrix is reused (remember - it is at least MxM, what we need)
//
// Model intialization is done in O(M^2). In principle, it can be
// done in O(M*log(M)), but before it we solved task with O(N*M^2)
// complexity, so it is only a small amount of total time spent.
//
bx = new double[m];
by = new double[m];
bw = new double[m];
tmp2 = new double[m];
s = 1;
for(i=0; i<=m-1; i++)
{
if( m!=1 )
{
u = Math.Cos(Math.PI*i/(m-1));
}
else
{
u = 0;
}
v = 0;
for(j=0; j<=m-1; j++)
{
if( j==0 )
{
tmp2[j] = 1;
}
else
{
if( j==1 )
{
tmp2[j] = u;
}
else
{
tmp2[j] = 2*u*tmp2[j-1]-tmp2[j-2];
}
}
v = v+tmp[j]*tmp2[j];
}
bx[i] = u;
by[i] = v;
bw[i] = s;
if( i==0 || i==m-1 )
{
bw[i] = 0.5*bw[i];
}
s = -s;
}
ratint.barycentricbuildxyw(bx, by, bw, m, p);
ratint.barycentriclintransx(p, 2/(xb-xa), -((xa+xb)/(xb-xa)));
ratint.barycentriclintransy(p, sb-sa, sa);
//
// Scale absolute errors obtained from LSFitLinearW.
// Relative error should be calculated separately
// (because of shifting/scaling of the task)
//
rep.taskrcond = lrep.taskrcond;
rep.rmserror = lrep.rmserror*(sb-sa);
rep.avgerror = lrep.avgerror*(sb-sa);
rep.maxerror = lrep.maxerror*(sb-sa);
rep.avgrelerror = 0;
relcnt = 0;
for(i=0; i<=n-1; i++)
{
if( (double)(yoriginal[i])!=(double)(0) )
{
rep.avgrelerror = rep.avgrelerror+Math.Abs(ratint.barycentriccalc(p, xoriginal[i])-yoriginal[i])/Math.Abs(yoriginal[i]);
relcnt = relcnt+1;
}
}
if( relcnt!=0 )
{
rep.avgrelerror = rep.avgrelerror/relcnt;
}
}
/*************************************************************************
Fitting by polynomials in barycentric form. This function provides simple
unterface for unconstrained unweighted fitting. See PolynomialFitWC() if
you need constrained fitting.
Task is linear, so linear least squares solver is used. Complexity of this
computational scheme is O(N*M^2), mostly dominated by least squares solver
SEE ALSO:
PolynomialFitWC()
INPUT PARAMETERS:
X - points, array[0..N-1].
Y - function values, array[0..N-1].
N - number of points, N>0
* if given, only leading N elements of X/Y are used
* if not given, automatically determined from sizes of X/Y
M - number of basis functions (= polynomial_degree + 1), M>=1
OUTPUT PARAMETERS:
Info- same format as in LSFitLinearW() subroutine:
* Info>0 task is solved
* Info<=0 an error occured:
-4 means inconvergence of internal SVD
P - interpolant in barycentric form.
Rep - report, same format as in LSFitLinearW() subroutine.
Following fields are set:
* RMSError rms error on the (X,Y).
* AvgError average error on the (X,Y).
* AvgRelError average relative error on the non-zero Y
* MaxError maximum error
NON-WEIGHTED ERRORS ARE CALCULATED
NOTES:
you can convert P from barycentric form to the power or Chebyshev
basis with PolynomialBar2Pow() or PolynomialBar2Cheb() functions from
POLINT subpackage.
-- ALGLIB PROJECT --
Copyright 10.12.2009 by Bochkanov Sergey
*************************************************************************/
public static void polynomialfit(double[] x,
double[] y,
int n,
int m,
ref int info,
ratint.barycentricinterpolant p,
polynomialfitreport rep)
{
int i = 0;
double[] w = new double[0];
double[] xc = new double[0];
double[] yc = new double[0];
int[] dc = new int[0];
info = 0;
alglib.ap.assert(n>0, "PolynomialFit: N<=0!");
alglib.ap.assert(m>0, "PolynomialFit: M<=0!");
alglib.ap.assert(alglib.ap.len(x)>=n, "PolynomialFit: Length(X)<N!");
alglib.ap.assert(alglib.ap.len(y)>=n, "PolynomialFit: Length(Y)<N!");
alglib.ap.assert(apserv.isfinitevector(x, n), "PolynomialFit: X contains infinite or NaN values!");
alglib.ap.assert(apserv.isfinitevector(y, n), "PolynomialFit: Y contains infinite or NaN values!");
w = new double[n];
for(i=0; i<=n-1; i++)
{
w[i] = 1;
}
polynomialfitwc(x, y, w, n, xc, yc, dc, 0, m, ref info, p, rep);
}
public override alglib.apobject make_copy()
{
polynomialfitreport _result = new polynomialfitreport();
_result.taskrcond = taskrcond;
_result.rmserror = rmserror;
_result.avgerror = avgerror;
_result.avgrelerror = avgrelerror;
_result.maxerror = maxerror;
return _result;
}
/*************************************************************************
Single-threaded stub. HPC ALGLIB replaces it by multithreaded code.
*************************************************************************/
public static void _pexec_polynomialfitwc(double[] x,
double[] y,
double[] w,
int n,
double[] xc,
double[] yc,
int[] dc,
int k,
int m,
ref int info,
ratint.barycentricinterpolant p,
polynomialfitreport rep)
{
polynomialfitwc(x,y,w,n,xc,yc,dc,k,m,ref info,p,rep);
}
/*************************************************************************
Single-threaded stub. HPC ALGLIB replaces it by multithreaded code.
*************************************************************************/
public static void _pexec_polynomialfit(double[] x,
double[] y,
int n,
int m,
ref int info,
ratint.barycentricinterpolant p,
polynomialfitreport rep)
{
polynomialfit(x,y,n,m,ref info,p,rep);
}
public static void polynomialfitwc(double[] x, double[] y, double[] w, double[] xc, double[] yc, int[] dc, int m, out int info, out barycentricinterpolant p, out polynomialfitreport rep)
{
int n;
int k;
if( (ap.len(x)!=ap.len(y)) || (ap.len(x)!=ap.len(w)))
throw new alglibexception("Error while calling 'polynomialfitwc': looks like one of arguments has wrong size");
if( (ap.len(xc)!=ap.len(yc)) || (ap.len(xc)!=ap.len(dc)))
throw new alglibexception("Error while calling 'polynomialfitwc': looks like one of arguments has wrong size");
info = 0;
p = new barycentricinterpolant();
rep = new polynomialfitreport();
n = ap.len(x);
k = ap.len(xc);
lsfit.polynomialfitwc(x, y, w, n, xc, yc, dc, k, m, ref info, p.innerobj, rep.innerobj);
return;
}
/*************************************************************************
Weighted fitting by polynomials in barycentric form, with constraints on
function values or first derivatives.
Small regularizing term is used when solving constrained tasks (to improve
stability).
Task is linear, so linear least squares solver is used. Complexity of this
computational scheme is O(N*M^2), mostly dominated by least squares solver
SEE ALSO:
PolynomialFit()
INPUT PARAMETERS:
X - points, array[0..N-1].
Y - function values, array[0..N-1].
W - weights, array[0..N-1]
Each summand in square sum of approximation deviations from
given values is multiplied by the square of corresponding
weight. Fill it by 1's if you don't want to solve weighted
task.
N - number of points, N>0.
* if given, only leading N elements of X/Y/W are used
* if not given, automatically determined from sizes of X/Y/W
XC - points where polynomial values/derivatives are constrained,
array[0..K-1].
YC - values of constraints, array[0..K-1]
DC - array[0..K-1], types of constraints:
* DC[i]=0 means that P(XC[i])=YC[i]
* DC[i]=1 means that P'(XC[i])=YC[i]
SEE BELOW FOR IMPORTANT INFORMATION ON CONSTRAINTS
K - number of constraints, 0<=K<M.
K=0 means no constraints (XC/YC/DC are not used in such cases)
M - number of basis functions (= polynomial_degree + 1), M>=1
OUTPUT PARAMETERS:
Info- same format as in LSFitLinearW() subroutine:
* Info>0 task is solved
* Info<=0 an error occured:
-4 means inconvergence of internal SVD
-3 means inconsistent constraints
P - interpolant in barycentric form.
Rep - report, same format as in LSFitLinearW() subroutine.
Following fields are set:
* RMSError rms error on the (X,Y).
* AvgError average error on the (X,Y).
* AvgRelError average relative error on the non-zero Y
* MaxError maximum error
NON-WEIGHTED ERRORS ARE CALCULATED
IMPORTANT:
this subroitine doesn't calculate task's condition number for K<>0.
NOTES:
you can convert P from barycentric form to the power or Chebyshev
basis with PolynomialBar2Pow() or PolynomialBar2Cheb() functions from
POLINT subpackage.
SETTING CONSTRAINTS - DANGERS AND OPPORTUNITIES:
Setting constraints can lead to undesired results, like ill-conditioned
behavior, or inconsistency being detected. From the other side, it allows
us to improve quality of the fit. Here we summarize our experience with
constrained regression splines:
* even simple constraints can be inconsistent, see Wikipedia article on
this subject: http://en.wikipedia.org/wiki/Birkhoff_interpolation
* the greater is M (given fixed constraints), the more chances that
constraints will be consistent
* in the general case, consistency of constraints is NOT GUARANTEED.
* in the one special cases, however, we can guarantee consistency. This
case is: M>1 and constraints on the function values (NOT DERIVATIVES)
Our final recommendation is to use constraints WHEN AND ONLY when you
can't solve your task without them. Anything beyond special cases given
above is not guaranteed and may result in inconsistency.
-- ALGLIB PROJECT --
Copyright 10.12.2009 by Bochkanov Sergey
*************************************************************************/
public static void polynomialfitwc(double[] x, double[] y, double[] w, int n, double[] xc, double[] yc, int[] dc, int k, int m, out int info, out barycentricinterpolant p, out polynomialfitreport rep)
{
info = 0;
p = new barycentricinterpolant();
rep = new polynomialfitreport();
lsfit.polynomialfitwc(x, y, w, n, xc, yc, dc, k, m, ref info, p.innerobj, rep.innerobj);
return;
}
/*************************************************************************
Fitting by polynomials in barycentric form. This function provides simple
unterface for unconstrained unweighted fitting. See PolynomialFitWC() if
you need constrained fitting.
Task is linear, so linear least squares solver is used. Complexity of this
computational scheme is O(N*M^2), mostly dominated by least squares solver
SEE ALSO:
PolynomialFitWC()
INPUT PARAMETERS:
X - points, array[0..N-1].
Y - function values, array[0..N-1].
N - number of points, N>0
* if given, only leading N elements of X/Y are used
* if not given, automatically determined from sizes of X/Y
M - number of basis functions (= polynomial_degree + 1), M>=1
OUTPUT PARAMETERS:
Info- same format as in LSFitLinearW() subroutine:
* Info>0 task is solved
* Info<=0 an error occured:
-4 means inconvergence of internal SVD
P - interpolant in barycentric form.
Rep - report, same format as in LSFitLinearW() subroutine.
Following fields are set:
* RMSError rms error on the (X,Y).
* AvgError average error on the (X,Y).
* AvgRelError average relative error on the non-zero Y
* MaxError maximum error
NON-WEIGHTED ERRORS ARE CALCULATED
NOTES:
you can convert P from barycentric form to the power or Chebyshev
basis with PolynomialBar2Pow() or PolynomialBar2Cheb() functions from
POLINT subpackage.
-- ALGLIB PROJECT --
Copyright 10.12.2009 by Bochkanov Sergey
*************************************************************************/
public static void polynomialfit(double[] x, double[] y, int n, int m, out int info, out barycentricinterpolant p, out polynomialfitreport rep)
{
info = 0;
p = new barycentricinterpolant();
rep = new polynomialfitreport();
lsfit.polynomialfit(x, y, n, m, ref info, p.innerobj, rep.innerobj);
return;
}
/*************************************************************************
Weighted fitting by Chebyshev polynomial in barycentric form, with
constraints on function values or first derivatives.
Small regularizing term is used when solving constrained tasks (to improve
stability).
Task is linear, so linear least squares solver is used. Complexity of this
computational scheme is O(N*M^2), mostly dominated by least squares solver
SEE ALSO:
PolynomialFit()
INPUT PARAMETERS:
X - points, array[0..N-1].
Y - function values, array[0..N-1].
W - weights, array[0..N-1]
Each summand in square sum of approximation deviations from
given values is multiplied by the square of corresponding
weight. Fill it by 1's if you don't want to solve weighted
task.
N - number of points, N>0.
XC - points where polynomial values/derivatives are constrained,
array[0..K-1].
YC - values of constraints, array[0..K-1]
DC - array[0..K-1], types of constraints:
* DC[i]=0 means that P(XC[i])=YC[i]
* DC[i]=1 means that P'(XC[i])=YC[i]
SEE BELOW FOR IMPORTANT INFORMATION ON CONSTRAINTS
K - number of constraints, 0<=K<M.
K=0 means no constraints (XC/YC/DC are not used in such cases)
M - number of basis functions (= polynomial_degree + 1), M>=1
OUTPUT PARAMETERS:
Info- same format as in LSFitLinearW() subroutine:
* Info>0 task is solved
* Info<=0 an error occured:
-4 means inconvergence of internal SVD
-3 means inconsistent constraints
-1 means another errors in parameters passed
(N<=0, for example)
P - interpolant in barycentric form.
Rep - report, same format as in LSFitLinearW() subroutine.
Following fields are set:
* RMSError rms error on the (X,Y).
* AvgError average error on the (X,Y).
* AvgRelError average relative error on the non-zero Y
* MaxError maximum error
NON-WEIGHTED ERRORS ARE CALCULATED
IMPORTANT:
this subroitine doesn't calculate task's condition number for K<>0.
SETTING CONSTRAINTS - DANGERS AND OPPORTUNITIES:
Setting constraints can lead to undesired results, like ill-conditioned
behavior, or inconsistency being detected. From the other side, it allows
us to improve quality of the fit. Here we summarize our experience with
constrained regression splines:
* even simple constraints can be inconsistent, see Wikipedia article on
this subject: http://en.wikipedia.org/wiki/Birkhoff_interpolation
* the greater is M (given fixed constraints), the more chances that
constraints will be consistent
* in the general case, consistency of constraints is NOT GUARANTEED.
* in the one special cases, however, we can guarantee consistency. This
case is: M>1 and constraints on the function values (NOT DERIVATIVES)
Our final recommendation is to use constraints WHEN AND ONLY when you
can't solve your task without them. Anything beyond special cases given
above is not guaranteed and may result in inconsistency.
-- ALGLIB PROJECT --
Copyright 10.12.2009 by Bochkanov Sergey
*************************************************************************/
public static void polynomialfitwc(double[] x,
double[] y,
ref double[] w,
int n,
double[] xc,
double[] yc,
ref int[] dc,
int k,
int m,
ref int info,
ref ratint.barycentricinterpolant p,
ref polynomialfitreport rep)
{
double xa = 0;
double xb = 0;
double sa = 0;
double sb = 0;
double[] xoriginal = new double[0];
double[] yoriginal = new double[0];
double[] y2 = new double[0];
double[] w2 = new double[0];
double[] tmp = new double[0];
double[] tmp2 = new double[0];
double[] tmpdiff = new double[0];
double[] bx = new double[0];
double[] by = new double[0];
double[] bw = new double[0];
double[,] fmatrix = new double[0,0];
double[,] cmatrix = new double[0,0];
int i = 0;
int j = 0;
double mx = 0;
double decay = 0;
double u = 0;
double v = 0;
double s = 0;
int relcnt = 0;
lsfit.lsfitreport lrep = new lsfit.lsfitreport();
int i_ = 0;
x = (double[])x.Clone();
y = (double[])y.Clone();
xc = (double[])xc.Clone();
yc = (double[])yc.Clone();
if( m<1 | n<1 | k<0 | k>=m )
{
info = -1;
return;
}
for(i=0; i<=k-1; i++)
{
info = 0;
if( dc[i]<0 )
{
info = -1;
}
if( dc[i]>1 )
{
info = -1;
}
if( info<0 )
{
return;
}
}
//
// weight decay for correct handling of task which becomes
// degenerate after constraints are applied
//
decay = 10000*AP.Math.MachineEpsilon;
//
// Scale X, Y, XC, YC
//
lsfit.lsfitscalexy(ref x, ref y, n, ref xc, ref yc, ref dc, k, ref xa, ref xb, ref sa, ref sb, ref xoriginal, ref yoriginal);
//
// allocate space, initialize/fill:
// * FMatrix- values of basis functions at X[]
// * CMatrix- values (derivatives) of basis functions at XC[]
// * fill constraints matrix
// * fill first N rows of design matrix with values
// * fill next M rows of design matrix with regularizing term
// * append M zeros to Y
// * append M elements, mean(abs(W)) each, to W
//
y2 = new double[n+m];
w2 = new double[n+m];
tmp = new double[m];
tmpdiff = new double[m];
fmatrix = new double[n+m, m];
if( k>0 )
{
cmatrix = new double[k, m+1];
}
//
// Fill design matrix, Y2, W2:
// * first N rows with basis functions for original points
// * next M rows with decay terms
//
for(i=0; i<=n-1; i++)
{
//
// prepare Ith row
// use Tmp for calculations to avoid multidimensional arrays overhead
//
for(j=0; j<=m-1; j++)
{
if( j==0 )
{
tmp[j] = 1;
}
else
{
if( j==1 )
{
tmp[j] = x[i];
}
else
{
tmp[j] = 2*x[i]*tmp[j-1]-tmp[j-2];
}
}
}
for(i_=0; i_<=m-1;i_++)
{
fmatrix[i,i_] = tmp[i_];
}
}
for(i=0; i<=m-1; i++)
{
for(j=0; j<=m-1; j++)
{
if( i==j )
{
fmatrix[n+i,j] = decay;
}
else
{
fmatrix[n+i,j] = 0;
}
}
}
for(i_=0; i_<=n-1;i_++)
{
y2[i_] = y[i_];
}
for(i_=0; i_<=n-1;i_++)
{
w2[i_] = w[i_];
}
mx = 0;
for(i=0; i<=n-1; i++)
{
mx = mx+Math.Abs(w[i]);
}
mx = mx/n;
for(i=0; i<=m-1; i++)
{
y2[n+i] = 0;
w2[n+i] = mx;
}
//
// fill constraints matrix
//
for(i=0; i<=k-1; i++)
{
//
// prepare Ith row
// use Tmp for basis function values,
// TmpDiff for basos function derivatives
//
for(j=0; j<=m-1; j++)
{
if( j==0 )
{
tmp[j] = 1;
tmpdiff[j] = 0;
}
else
{
if( j==1 )
{
tmp[j] = xc[i];
tmpdiff[j] = 1;
}
else
{
tmp[j] = 2*xc[i]*tmp[j-1]-tmp[j-2];
tmpdiff[j] = 2*(tmp[j-1]+xc[i]*tmpdiff[j-1])-tmpdiff[j-2];
}
}
}
if( dc[i]==0 )
{
for(i_=0; i_<=m-1;i_++)
{
cmatrix[i,i_] = tmp[i_];
}
}
if( dc[i]==1 )
{
for(i_=0; i_<=m-1;i_++)
{
cmatrix[i,i_] = tmpdiff[i_];
}
}
cmatrix[i,m] = yc[i];
}
//
// Solve constrained task
//
if( k>0 )
{
//
// solve using regularization
//
lsfit.lsfitlinearwc(y2, ref w2, ref fmatrix, cmatrix, n+m, m, k, ref info, ref tmp, ref lrep);
}
else
{
//
// no constraints, no regularization needed
//
lsfit.lsfitlinearwc(y, ref w, ref fmatrix, cmatrix, n, m, 0, ref info, ref tmp, ref lrep);
}
if( info<0 )
{
return;
}
//
// Generate barycentric model and scale it
// * BX, BY store barycentric model nodes
// * FMatrix is reused (remember - it is at least MxM, what we need)
//
// Model intialization is done in O(M^2). In principle, it can be
// done in O(M*log(M)), but before it we solved task with O(N*M^2)
// complexity, so it is only a small amount of total time spent.
//
bx = new double[m];
by = new double[m];
bw = new double[m];
tmp2 = new double[m];
s = 1;
for(i=0; i<=m-1; i++)
{
if( m!=1 )
{
u = Math.Cos(Math.PI*i/(m-1));
}
else
{
u = 0;
}
v = 0;
for(j=0; j<=m-1; j++)
{
if( j==0 )
{
tmp2[j] = 1;
}
else
{
if( j==1 )
{
tmp2[j] = u;
}
else
{
tmp2[j] = 2*u*tmp2[j-1]-tmp2[j-2];
}
}
v = v+tmp[j]*tmp2[j];
}
bx[i] = u;
by[i] = v;
bw[i] = s;
if( i==0 | i==m-1 )
{
bw[i] = 0.5*bw[i];
}
s = -s;
}
ratint.barycentricbuildxyw(ref bx, ref by, ref bw, m, ref p);
ratint.barycentriclintransx(ref p, 2/(xb-xa), -((xa+xb)/(xb-xa)));
ratint.barycentriclintransy(ref p, sb-sa, sa);
//
// Scale absolute errors obtained from LSFitLinearW.
// Relative error should be calculated separately
// (because of shifting/scaling of the task)
//
rep.taskrcond = lrep.taskrcond;
rep.rmserror = lrep.rmserror*(sb-sa);
rep.avgerror = lrep.avgerror*(sb-sa);
rep.maxerror = lrep.maxerror*(sb-sa);
rep.avgrelerror = 0;
relcnt = 0;
for(i=0; i<=n-1; i++)
{
if( (double)(yoriginal[i])!=(double)(0) )
{
rep.avgrelerror = rep.avgrelerror+Math.Abs(ratint.barycentriccalc(ref p, xoriginal[i])-yoriginal[i])/Math.Abs(yoriginal[i]);
relcnt = relcnt+1;
}
}
if( relcnt!=0 )
{
rep.avgrelerror = rep.avgrelerror/relcnt;
}
}
/*************************************************************************
Least squares fitting by polynomial.
This subroutine is "lightweight" alternative for more complex and feature-
rich PolynomialFitWC(). See PolynomialFitWC() for more information about
subroutine parameters (we don't duplicate it here because of length)
-- ALGLIB PROJECT --
Copyright 12.10.2009 by Bochkanov Sergey
*************************************************************************/
public static void polynomialfit(ref double[] x,
ref double[] y,
int n,
int m,
ref int info,
ref ratint.barycentricinterpolant p,
ref polynomialfitreport rep)
{
int i = 0;
double[] w = new double[0];
double[] xc = new double[0];
double[] yc = new double[0];
int[] dc = new int[0];
if( n>0 )
{
w = new double[n];
for(i=0; i<=n-1; i++)
{
w[i] = 1;
}
}
polynomialfitwc(x, y, ref w, n, xc, yc, ref dc, 0, m, ref info, ref p, ref rep);
}
/*************************************************************************
* Weighted fitting by Chebyshev polynomial in barycentric form, with
* constraints on function values or first derivatives.
*
* Small regularizing term is used when solving constrained tasks (to improve
* stability).
*
* Task is linear, so linear least squares solver is used. Complexity of this
* computational scheme is O(N*M^2), mostly dominated by least squares solver
*
* SEE ALSO:
* PolynomialFit()
*
* INPUT PARAMETERS:
* X - points, array[0..N-1].
* Y - function values, array[0..N-1].
* W - weights, array[0..N-1]
* Each summand in square sum of approximation deviations from
* given values is multiplied by the square of corresponding
* weight. Fill it by 1's if you don't want to solve weighted
* task.
* N - number of points, N>0.
* XC - points where polynomial values/derivatives are constrained,
* array[0..K-1].
* YC - values of constraints, array[0..K-1]
* DC - array[0..K-1], types of constraints:
* DC[i]=0 means that P(XC[i])=YC[i]
* DC[i]=1 means that P'(XC[i])=YC[i]
* SEE BELOW FOR IMPORTANT INFORMATION ON CONSTRAINTS
* K - number of constraints, 0<=K<M.
* K=0 means no constraints (XC/YC/DC are not used in such cases)
* M - number of basis functions (= polynomial_degree + 1), M>=1
*
* OUTPUT PARAMETERS:
* Info- same format as in LSFitLinearW() subroutine:
* Info>0 task is solved
* Info<=0 an error occured:
* -4 means inconvergence of internal SVD
* -3 means inconsistent constraints
* -1 means another errors in parameters passed
* (N<=0, for example)
* P - interpolant in barycentric form.
* Rep - report, same format as in LSFitLinearW() subroutine.
* Following fields are set:
* RMSError rms error on the (X,Y).
* AvgError average error on the (X,Y).
* AvgRelError average relative error on the non-zero Y
* MaxError maximum error
* NON-WEIGHTED ERRORS ARE CALCULATED
*
* IMPORTANT:
* this subroitine doesn't calculate task's condition number for K<>0.
*
* SETTING CONSTRAINTS - DANGERS AND OPPORTUNITIES:
*
* Setting constraints can lead to undesired results, like ill-conditioned
* behavior, or inconsistency being detected. From the other side, it allows
* us to improve quality of the fit. Here we summarize our experience with
* constrained regression splines:
* even simple constraints can be inconsistent, see Wikipedia article on
* this subject: http://en.wikipedia.org/wiki/Birkhoff_interpolation
* the greater is M (given fixed constraints), the more chances that
* constraints will be consistent
* in the general case, consistency of constraints is NOT GUARANTEED.
* in the one special cases, however, we can guarantee consistency. This
* case is: M>1 and constraints on the function values (NOT DERIVATIVES)
*
* Our final recommendation is to use constraints WHEN AND ONLY when you
* can't solve your task without them. Anything beyond special cases given
* above is not guaranteed and may result in inconsistency.
*
* -- ALGLIB PROJECT --
* Copyright 10.12.2009 by Bochkanov Sergey
*************************************************************************/
public static void polynomialfitwc(double[] x,
double[] y,
ref double[] w,
int n,
double[] xc,
double[] yc,
ref int[] dc,
int k,
int m,
ref int info,
ref ratint.barycentricinterpolant p,
ref polynomialfitreport rep)
{
double xa = 0;
double xb = 0;
double sa = 0;
double sb = 0;
double[] xoriginal = new double[0];
double[] yoriginal = new double[0];
double[] y2 = new double[0];
double[] w2 = new double[0];
double[] tmp = new double[0];
double[] tmp2 = new double[0];
double[] tmpdiff = new double[0];
double[] bx = new double[0];
double[] by = new double[0];
double[] bw = new double[0];
double[,] fmatrix = new double[0, 0];
double[,] cmatrix = new double[0, 0];
int i = 0;
int j = 0;
double mx = 0;
double decay = 0;
double u = 0;
double v = 0;
double s = 0;
int relcnt = 0;
lsfit.lsfitreport lrep = new lsfit.lsfitreport();
int i_ = 0;
x = (double[])x.Clone();
y = (double[])y.Clone();
xc = (double[])xc.Clone();
yc = (double[])yc.Clone();
if (m < 1 | n < 1 | k < 0 | k >= m)
{
info = -1;
return;
}
for (i = 0; i <= k - 1; i++)
{
info = 0;
if (dc[i] < 0)
{
info = -1;
}
if (dc[i] > 1)
{
info = -1;
}
if (info < 0)
{
return;
}
}
//
// weight decay for correct handling of task which becomes
// degenerate after constraints are applied
//
decay = 10000 * AP.Math.MachineEpsilon;
//
// Scale X, Y, XC, YC
//
lsfit.lsfitscalexy(ref x, ref y, n, ref xc, ref yc, ref dc, k, ref xa, ref xb, ref sa, ref sb, ref xoriginal, ref yoriginal);
//
// allocate space, initialize/fill:
// * FMatrix- values of basis functions at X[]
// * CMatrix- values (derivatives) of basis functions at XC[]
// * fill constraints matrix
// * fill first N rows of design matrix with values
// * fill next M rows of design matrix with regularizing term
// * append M zeros to Y
// * append M elements, mean(abs(W)) each, to W
//
y2 = new double[n + m];
w2 = new double[n + m];
tmp = new double[m];
tmpdiff = new double[m];
fmatrix = new double[n + m, m];
if (k > 0)
{
cmatrix = new double[k, m + 1];
}
//
// Fill design matrix, Y2, W2:
// * first N rows with basis functions for original points
// * next M rows with decay terms
//
for (i = 0; i <= n - 1; i++)
{
//
// prepare Ith row
// use Tmp for calculations to avoid multidimensional arrays overhead
//
for (j = 0; j <= m - 1; j++)
{
if (j == 0)
{
tmp[j] = 1;
}
else
{
if (j == 1)
{
tmp[j] = x[i];
}
else
{
tmp[j] = 2 * x[i] * tmp[j - 1] - tmp[j - 2];
}
}
}
for (i_ = 0; i_ <= m - 1; i_++)
{
fmatrix[i, i_] = tmp[i_];
}
}
for (i = 0; i <= m - 1; i++)
{
for (j = 0; j <= m - 1; j++)
{
if (i == j)
{
fmatrix[n + i, j] = decay;
}
else
{
fmatrix[n + i, j] = 0;
}
}
}
for (i_ = 0; i_ <= n - 1; i_++)
{
y2[i_] = y[i_];
}
for (i_ = 0; i_ <= n - 1; i_++)
{
w2[i_] = w[i_];
}
mx = 0;
for (i = 0; i <= n - 1; i++)
{
mx = mx + Math.Abs(w[i]);
}
mx = mx / n;
for (i = 0; i <= m - 1; i++)
{
y2[n + i] = 0;
w2[n + i] = mx;
}
//
// fill constraints matrix
//
for (i = 0; i <= k - 1; i++)
{
//
// prepare Ith row
// use Tmp for basis function values,
// TmpDiff for basos function derivatives
//
for (j = 0; j <= m - 1; j++)
{
if (j == 0)
{
tmp[j] = 1;
tmpdiff[j] = 0;
}
else
{
if (j == 1)
{
tmp[j] = xc[i];
tmpdiff[j] = 1;
}
else
{
tmp[j] = 2 * xc[i] * tmp[j - 1] - tmp[j - 2];
tmpdiff[j] = 2 * (tmp[j - 1] + xc[i] * tmpdiff[j - 1]) - tmpdiff[j - 2];
}
}
}
if (dc[i] == 0)
{
for (i_ = 0; i_ <= m - 1; i_++)
{
cmatrix[i, i_] = tmp[i_];
}
}
if (dc[i] == 1)
{
for (i_ = 0; i_ <= m - 1; i_++)
{
cmatrix[i, i_] = tmpdiff[i_];
}
}
cmatrix[i, m] = yc[i];
}
//
// Solve constrained task
//
if (k > 0)
{
//
// solve using regularization
//
lsfit.lsfitlinearwc(y2, ref w2, ref fmatrix, cmatrix, n + m, m, k, ref info, ref tmp, ref lrep);
}
else
{
//
// no constraints, no regularization needed
//
lsfit.lsfitlinearwc(y, ref w, ref fmatrix, cmatrix, n, m, 0, ref info, ref tmp, ref lrep);
}
if (info < 0)
{
return;
}
//
// Generate barycentric model and scale it
// * BX, BY store barycentric model nodes
// * FMatrix is reused (remember - it is at least MxM, what we need)
//
// Model intialization is done in O(M^2). In principle, it can be
// done in O(M*log(M)), but before it we solved task with O(N*M^2)
// complexity, so it is only a small amount of total time spent.
//
bx = new double[m];
by = new double[m];
bw = new double[m];
tmp2 = new double[m];
s = 1;
for (i = 0; i <= m - 1; i++)
{
if (m != 1)
{
u = Math.Cos(Math.PI * i / (m - 1));
}
else
{
u = 0;
}
v = 0;
for (j = 0; j <= m - 1; j++)
{
if (j == 0)
{
tmp2[j] = 1;
}
else
{
if (j == 1)
{
tmp2[j] = u;
}
else
{
tmp2[j] = 2 * u * tmp2[j - 1] - tmp2[j - 2];
}
}
v = v + tmp[j] * tmp2[j];
}
bx[i] = u;
by[i] = v;
bw[i] = s;
if (i == 0 | i == m - 1)
{
bw[i] = 0.5 * bw[i];
}
s = -s;
}
ratint.barycentricbuildxyw(ref bx, ref by, ref bw, m, ref p);
ratint.barycentriclintransx(ref p, 2 / (xb - xa), -((xa + xb) / (xb - xa)));
ratint.barycentriclintransy(ref p, sb - sa, sa);
//
// Scale absolute errors obtained from LSFitLinearW.
// Relative error should be calculated separately
// (because of shifting/scaling of the task)
//
rep.taskrcond = lrep.taskrcond;
rep.rmserror = lrep.rmserror * (sb - sa);
rep.avgerror = lrep.avgerror * (sb - sa);
rep.maxerror = lrep.maxerror * (sb - sa);
rep.avgrelerror = 0;
relcnt = 0;
for (i = 0; i <= n - 1; i++)
{
if ((double)(yoriginal[i]) != (double)(0))
{
rep.avgrelerror = rep.avgrelerror + Math.Abs(ratint.barycentriccalc(ref p, xoriginal[i]) - yoriginal[i]) / Math.Abs(yoriginal[i]);
relcnt = relcnt + 1;
}
}
if (relcnt != 0)
{
rep.avgrelerror = rep.avgrelerror / relcnt;
}
}