protected override void OnClick()
{
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
//first get the selected parcel features
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
//check if there is a Manual Mode "modify" job active ===========
ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan;
if (pCadPacMan.PacketOpen)
{
MessageBox.Show("The Delete Parcels command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.",
"Delete Selected Parcels");
return;
}
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
IActiveView pActiveView = ArcMap.Document.ActiveView;
IMap pMap = pActiveView.FocusMap;
ICadastralFabric pCadFabric = null;
clsFabricUtils FabricUTILS = new clsFabricUtils();
IProgressDialog2 pProgressorDialog = null;
//if we're in an edit session then grab the target fabric
if (pEd.EditState == esriEditState.esriStateEditing)
{
pCadFabric = pCadEd.CadastralFabric;
}
if (pCadFabric == null)
{//find the first fabric in the map
if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric))
{
MessageBox.Show
("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
IArray CFParcelLayers = new ArrayClass();
if (!(FabricUTILS.GetFabricSubLayersFromFabric(pMap, pCadFabric, out CFPointLayer, out CFLineLayer,
out CFParcelLayers, out CFControlLayer, out CFLinePointLayer)))
{
return; //no fabric sublayers available for the targeted fabric
}
bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false;
IWorkspace pWS = null;
ICadastralFabricLayer pCFLayer = null;
ITable pParcelsTable = null;
ITable pLinesTable = null;
ITable pLinePtsTable = null;
ITable pPointsTable = null;
ITable pControlTable = null;
try
{
//Get the selection of parcels
IFeatureLayer pFL = (IFeatureLayer)CFParcelLayers.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
if (!FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersionedDelete))
{
return;
}
if (bUseNonVersionedDelete)
{
pCFLayer = new CadastralFabricLayerClass();
pCFLayer.CadastralFabric = pCadFabric;
pCadEd.CadastralFabricLayer = pCFLayer;//NOTE: Need to set this back to NULL when done.
}
ICadastralSelection pCadaSel = (ICadastralSelection)pCadEd;
IEnumGSParcels pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround
IFeatureSelection pFeatSel = (IFeatureSelection)pFL;
ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
bMoreThan995UnjoinedParcels = (pSelSet.Count > pCadaSel.SelectedParcelCount); //used for bug workaround
if (pCadaSel.SelectedParcelCount == 0 && pSelSet.Count == 0)
{
MessageBox.Show("Please select some fabric parcels and try again.", "No Selection",
MessageBoxButtons.OK, MessageBoxIcon.Information);
pMouseCursor.SetCursor(0);
if (bUseNonVersionedDelete)
{
pCadEd.CadastralFabricLayer = null;
CFParcelLayers = null;
CFPointLayer = null;
CFLineLayer = null;
CFControlLayer = null;
CFLinePointLayer = null;
}
return;
}
if (bMoreThan995UnjoinedParcels)
{
m_bShowProgressor = (pSelSet.Count > 10);
}
else
{
m_bShowProgressor = (pCadaSel.SelectedParcelCount > 10);
}
if (m_bShowProgressor)
{
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
if (bMoreThan995UnjoinedParcels)
{
m_pStepProgressor.MaxRange = pSelSet.Count * 18; //(estimate 7 lines per parcel, 4 pts per parcel, 3 line points per parcel, and there is a second loop on parcel list)
}
else
{
m_pStepProgressor.MaxRange = pCadaSel.SelectedParcelCount * 18; //(estimate 7 lines per parcel, 4 pts per parcel, 3 line points per parcel, and there is a second loop on parcel list)
}
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
m_pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
//====== need to do this for all the parcel sublayers in the map that are part of the target fabric
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Collecting parcel data...";
}
//Add the OIDs of all the selected parcels into a new feature IDSet
string[] sOIDList = { "(" };
int tokenLimit = 995;
bool bCont = true;
int j = 0;
int iCounter = 0;
m_pFIDSetParcels = new FIDSetClass();
//===================== start bug workaraound for 10.0 client ===================
if (bMoreThan995UnjoinedParcels)
{
ICursor pCursor = null;
pSelSet.Search(null, false, out pCursor);//code deletes all selected parcels
IFeatureCursor pParcelFeatCurs = (IFeatureCursor)pCursor;
IFeature pParcFeat = pParcelFeatCurs.NextFeature();
while (pParcFeat != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
{
break;
}
}
bool bExists = false;
m_pFIDSetParcels.Find(pParcFeat.OID, out bExists);
if (!bExists)
{
m_pFIDSetParcels.Add(pParcFeat.OID);
if (iCounter <= tokenLimit)
{
sOIDList[j] = sOIDList[j] + Convert.ToString(pParcFeat.OID) + ",";
iCounter++;
}
else
{//maximum tokens reached
sOIDList[j] = sOIDList[j].Trim();
iCounter = 0;
//set up the next OIDList
j++;
FabricUTILS.RedimPreserveString(ref sOIDList, 1);
sOIDList[j] = "(";
sOIDList[j] = sOIDList[j] + Convert.ToString(pParcFeat.OID) + ",";
}
}
Marshal.ReleaseComObject(pParcFeat); //garbage collection
pParcFeat = pParcelFeatCurs.NextFeature();
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
{
m_pStepProgressor.Step();
}
}
}
Marshal.ReleaseComObject(pCursor); //garbage collection
//===================== end bug workaraound for 10.0 client ===================
}
else //===the following code path is preferred======
{
pEnumGSParcels.Reset();
IGSParcel pGSParcel = pEnumGSParcels.Next();
while (pGSParcel != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
{
break;
}
}
m_pFIDSetParcels.Add(pGSParcel.DatabaseId);
if (iCounter <= tokenLimit)
{
sOIDList[j] = sOIDList[j] + Convert.ToString(pGSParcel.DatabaseId) + ",";
iCounter++;
}
else
{//maximum tokens reached
sOIDList[j] = sOIDList[j].Trim();
iCounter = 0;
//set up the next OIDList
j++;
FabricUTILS.RedimPreserveString(ref sOIDList, 1);
sOIDList[j] = "(";
sOIDList[j] = sOIDList[j] + Convert.ToString(pGSParcel.DatabaseId) + ",";
}
Marshal.ReleaseComObject(pGSParcel); //garbage collection
pGSParcel = pEnumGSParcels.Next();
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
{
m_pStepProgressor.Step();
}
}
}
Marshal.ReleaseComObject(pEnumGSParcels); //garbage collection
}
if (!bCont)
{
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
string sTime = "";
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
//see if parcel locks can be obtained on the selected parcels. First create a job.
DateTime localNow = DateTime.Now;
sTime = Convert.ToString(localNow);
ICadastralJob pJob = new CadastralJobClass();
pJob.Name = sTime;
pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
pJob.Description = "Delete selected parcels";
try
{
Int32 jobId = pCadFabric.CreateJob(pJob);
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
{
MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
}
else
{
MessageBox.Show(ex.Message);
}
return;
}
}
//if we're in an enterprise then test for edit locks
ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric;
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
pFabLocks.LockingJob = sTime;
ILongArray pLocksInConflict = null;
ILongArray pSoftLcksInConflict = null;
ILongArray pParcelsToLock = new LongArrayClass();
FabricUTILS.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, m_pStepProgressor);
if (m_bShowProgressor && !bIsFileBasedGDB)
{
m_pStepProgressor.Message = "Testing for edit locks on parcels...";
}
try
{
pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict);
}
catch (COMException pCOMEx)
{
if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS ||
pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED)
{
MessageBox.Show("Edit Locks could not be acquired on all selected parcels.");
// since the operation is being aborted, release any locks that were acquired
pFabLocks.UndoLastAcquiredLocks();
}
else
{
MessageBox.Show(pCOMEx.Message + Environment.NewLine + Convert.ToString(pCOMEx.ErrorCode));
}
return;
}
}
//Build an IDSet of lines for the parcel to be deleted, and build an IDSet of the points for those lines
m_pFIDSetLines = new FIDSetClass();
m_pFIDSetPoints = new FIDSetClass();
if (pEd.EditState == esriEditState.esriStateEditing)
{
try
{
pEd.StartOperation();
}
catch
{
pEd.AbortOperation();//abort any open edit operations and try again
pEd.StartOperation();
}
}
if (bUseNonVersionedDelete)
{
if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned))
{
return;
}
}
//first delete all the parcel records
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Deleting parcels...";
}
bool bSuccess = true;
pParcelsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
pLinesTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines);
pLinePtsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints);
pPointsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints);
pControlTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTControl);
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pParcelsTable, m_pFIDSetParcels, m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pParcelsTable,
m_pFIDSetParcels, m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
if (!bIsUnVersioned)
{
//check version and if the Cancel button was not clicked and we're higher than
//version 10.0, then re-try the delete with the core delete command
string sVersion = Application.ProductVersion;
int iErrCode = FabricUTILS.LastErrorCode;
if (!sVersion.StartsWith("10.0") && iErrCode == -2147217400)
{
FabricUTILS.ExecuteCommand("{B0A62C1C-7FAE-457A-AB25-A966B7254EF6}");
}
}
return;
}
//next need to use an in clause for lines, so ...
string[] sPointOIDList = { "" };
int iCnt = 0;
int iTokenCnt = 0;
int iStepCnt = 1;
//...for each item in the sOIDList array
foreach (string inClause in sOIDList)
{
ICursor pLineCurs = FabricUTILS.GetCursorFromCommaSeparatedOIDList(pLinesTable, inClause, "PARCELID");
IRow pRow = pLineCurs.NextRow();
Int32 iFromPt = pLinesTable.Fields.FindField("FROMPOINTID");
Int32 iToPt = pLinesTable.Fields.FindField("TOPOINTID");
while (pRow != null)
{
if (iTokenCnt >= tokenLimit)
{
FabricUTILS.RedimPreserveString(ref sPointOIDList, 1);
iTokenCnt = 0;
iCnt++;
}
m_pFIDSetLines.Add(pRow.OID);
Int32 i = (Int32)pRow.get_Value(iFromPt);
if (i > -1)
{
bool bExists = false;
m_pFIDSetPoints.Find(i, out bExists);
if (!bExists)
{
m_pFIDSetPoints.Add(i);
sPointOIDList[iCnt] = sPointOIDList[iCnt] + Convert.ToString(i) + ",";
iTokenCnt++;
}
}
i = (Int32)pRow.get_Value(iToPt);
if (i > -1)
{
bool bExists = false;
m_pFIDSetPoints.Find(i, out bExists);
if (!bExists)
{
m_pFIDSetPoints.Add(i);
sPointOIDList[iCnt] = sPointOIDList[iCnt] + Convert.ToString(i) + ",";
iTokenCnt++;
}
}
Marshal.ReleaseComObject(pRow); //garbage collection
pRow = pLineCurs.NextRow();
}
Marshal.ReleaseComObject(pLineCurs); //garbage collection
//delete line records based on the selected parcels
string sMessage = "Deleting lines...";
int iSetCnt = sOIDList.GetLength(0);
if (iSetCnt > 1)
{
sMessage += "Step " + Convert.ToString(iStepCnt) + " of " + Convert.ToString(iSetCnt);
}
if (m_bShowProgressor)
{
m_pStepProgressor.Message = sMessage;
}
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pLinesTable, m_pFIDSetLines, m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pLinesTable, m_pFIDSetLines, m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
//delete the line points for the deleted parcels
//build the list of the line points that need to be deleted.
//IFeatureClass pFeatCLLinePoints = CFLinePointLayer.FeatureClass;
string NewInClause = "";
//remove trailing comma
if ((inClause.Substring(inClause.Length - 1, 1)) == ",")
{
NewInClause = inClause.Substring(0, inClause.Length - 1);
}
//m_pQF.WhereClause = (sPref + "parcelid" + sSuff).Trim() + " IN " + NewInClause + ")";
m_pQF.WhereClause = "PARCELID IN " + NewInClause + ")";
ICursor pLinePointCurs = pLinePtsTable.Search(m_pQF, false);
IRow pLinePointFeat = pLinePointCurs.NextRow();
//Build an IDSet of linepoints for parcels to be deleted
IFIDSet pFIDSetLinePoints = new FIDSetClass();
while (pLinePointFeat != null)
{
pFIDSetLinePoints.Add(pLinePointFeat.OID);
Marshal.ReleaseComObject(pLinePointFeat); //garbage collection
pLinePointFeat = pLinePointCurs.NextRow();
}
//===========deletes linepoints associated with parcels
iSetCnt = sOIDList.GetLength(0);
sMessage = "Deleting line-points...";
if (iSetCnt > 1)
{
sMessage += "Step " + Convert.ToString(iStepCnt) + " of " + Convert.ToString(iSetCnt);
}
if (m_bShowProgressor)
{
m_pStepProgressor.Message = sMessage;
}
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pLinePtsTable,
pFIDSetLinePoints, m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pLinePtsTable,
pFIDSetLinePoints, m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
if (pLinePointCurs != null)
{
Marshal.ReleaseComObject(pLinePointCurs); //garbage
}
return;
}
///////==============================================
Marshal.ReleaseComObject(pLinePointCurs); //garbage
iStepCnt++;
}
//now need to get points that should not be deleted, because they are used by lines that are not deleted.
//first search for the remaining lines. Any that have from/to points that are in the point fidset are the points
//that should stay
IFIDSet pFIDSetNullGeomLinePtFrom = new FIDSetClass();
IFIDSet pFIDSetNullGeomLinePtTo = new FIDSetClass();
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Updating point delete list...";
}
for (int z = 0; z <= iCnt; z++)
{
//remove trailing comma
if ((sPointOIDList[z].Trim() == ""))
{
break;
}
if ((sPointOIDList[z].Substring(sPointOIDList[z].Length - 1, 1)) == ",")
{
sPointOIDList[z] = sPointOIDList[z].Substring(0, sPointOIDList[z].Length - 1);
}
}
//string TheWhereClause = "(" + (sPref + "frompointid" + sSuff).Trim() + " IN (";
//UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "frompointid",
// TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtFrom);
//TheWhereClause = "(" + (sPref + "topointid" + sSuff).Trim() + " IN (";
//UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "topointid",
// TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtTo);
string TheWhereClause = "(FROMPOINTID IN (";
UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "FROMPOINTID",
TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtFrom);
TheWhereClause = "(TOPOINTID IN (";
UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "TOPOINTID",
TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtTo);
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Deleting points...";
}
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pPointsTable, m_pFIDSetPoints,
m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pPointsTable, m_pFIDSetPoints,
m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
//====Phase 2 of line-point delete. Remove the Line-points that no longer have underlying points.
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Deleting line-points...";
}
for (int z = 0; z <= iCnt; z++)
{
if ((sPointOIDList[z].Trim() == ""))
{
continue;
}
//remove line points where underlying points were deleted
bSuccess = FabricUTILS.DeleteByQuery(pWS, pLinePtsTable, pLinePtsTable.Fields.get_Field(pLinePtsTable.FindField("LinePointID")),
sPointOIDList, !bIsUnVersioned, m_pStepProgressor, m_pTrackCancel);
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
}
//=====
//Empty geometry on points that are floating points on unjoined parcels
m_pEmptyGeoms = new FIDSetClass();
FabricUTILS.IntersectFIDSetCommonIDs(pFIDSetNullGeomLinePtTo, pFIDSetNullGeomLinePtFrom, out m_pEmptyGeoms);
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
pSchemaEd.ReleaseReadOnlyFields(pPointsTable, esriCadastralFabricTable.esriCFTPoints); //release safety-catch
if (!bUseNonVersionedDelete)
{
FabricUTILS.EmptyGeometries((IFeatureClass)pPointsTable, m_pEmptyGeoms);
}
else
{
FabricUTILS.EmptyGeometriesUnversioned(pWS, CFPointLayer.FeatureClass, m_pEmptyGeoms);
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);//set safety back on
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Resetting control point associations...";
}
for (int z = 0; z <= iCnt; z++)
{
if ((sPointOIDList[z].Trim() == ""))
{
break;
}
//cleanup associated control points, and associations where underlying points were deleted
//m_pQF.WhereClause = (sPref + "pointid" + sSuff).Trim() + " IN (" + sPointOIDList[z] + ")";
m_pQF.WhereClause = "POINTID IN (" + sPointOIDList[z] + ")";
pSchemaEd.ReleaseReadOnlyFields(pControlTable, esriCadastralFabricTable.esriCFTControl); //release safety-catch
if (!FabricUTILS.ResetControlAssociations(pControlTable, m_pQF, bUseNonVersionedDelete))
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on
}
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on
if (bUseNonVersionedDelete)
{
FabricUTILS.StopEditing(pWS);
}
if (pEd.EditState == esriEditState.esriStateEditing)
{
pEd.StopOperation("Delete parcels");
}
//clear selection, to make sure the parcel explorer is updated and refreshed properly
if (pFeatSel != null && bMoreThan995UnjoinedParcels)
{
pFeatSel.Clear();
}
}
catch (Exception ex)
{
if (bUseNonVersionedDelete)
{
FabricUTILS.AbortEditing(pWS);
}
if (pEd != null)
{
if (pEd.EditState == esriEditState.esriStateEditing)
{
pEd.AbortOperation();
}
}
MessageBox.Show(ex.Message);
return;
}
finally
{
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
//update the TOC
IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document);
for (int i = 0; i < mxDocument.ContentsViewCount; i++)
{
IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i);
pCV.Refresh(null);
}
if (pMouseCursor != null)
{
pMouseCursor.SetCursor(0);
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pProgressorDialog = null;
if (bUseNonVersionedDelete)
{
pCadEd.CadastralFabricLayer = null;
CFParcelLayers = null;
CFPointLayer = null;
CFLineLayer = null;
CFControlLayer = null;
CFLinePointLayer = null;
}
}
}