public static GCViewLive CreateSectionAtFaceParameter(GCRevitDocument doc, Face face, UV param, double viewCropDim, double viewDepth)
{
var viewTypeId = GetSectionType(doc, StandardSectionViewFamilyTypeName).Id;
var boundBox = GenerateBoundingBoxFromFaceAndParameter(face, param, viewCropDim, viewDepth);
return(GCViewLive.CreateGCViewLive(ViewSection.CreateSection(doc.Document, viewTypeId, boundBox)));
}
void g()
{
ElementId SectionId = GetViewTypeIdByViewType(
ViewFamily.Section);
ViewSection NyViewSectionR
= ViewSection.CreateSection(
doc.Document, SectionId, bbNewSectionR);
}
private static ElementId SectionFromTwoPoints(Document doc, XYZ p1, XYZ p2, double height, double elevation, double view_depth)
{
//Convert all numeric values to internal units
height = UnitUtils.ConvertToInternalUnits(height, DisplayUnitType.DUT_METERS);
elevation = UnitUtils.ConvertToInternalUnits(elevation, DisplayUnitType.DUT_METERS);
view_depth = UnitUtils.ConvertToInternalUnits(view_depth, DisplayUnitType.DUT_MILLIMETERS);
//Filtered the document and get the view section, get its ID
FilteredElementCollector filter = new FilteredElementCollector(doc);
Element view1 = filter.OfClass(typeof(ViewFamilyType))
.WhereElementIsElementType()
.Cast <ViewFamilyType>()
.First(x => x.ViewFamily == ViewFamily.Section);
ElementId viewId = view1.Id;
//Create a bounding box on the origin
BoundingBoxXYZ bBox = new BoundingBoxXYZ();
bBox.Min = new XYZ(0, 0, 0);
bBox.Max = new XYZ(p1.DistanceTo(p2), height, view_depth);
//Cartesian transform for the BBox, from 0,0,0 to line initial point
Transform t = new Transform(Transform.Identity);
XYZ bb_x = (p2 - p1).Normalize();
XYZ bb_y = XYZ.BasisZ;
XYZ bb_z = bb_x.CrossProduct(bb_y);
t.Origin = new XYZ(p1.X, p1.Y, elevation);
t.BasisX = bb_x;
t.BasisY = bb_y;
t.BasisZ = bb_z;
bBox.Transform = t;
//try
//{
using (Transaction trans = new Transaction(doc, "Create cross section"))
{
trans.Start();
ViewSection sec = ViewSection.CreateSection(doc, viewId, bBox);
trans.Commit();
return(sec.Id);
}
//}
// catch
// {
// return null;
// }
}
public static ViewSection CreateSectionAtBottomAndRight(Document doc, Element StructuralFrame, double bottomorleftoffset, double ToporRightoffset)
{
IList <Parameter> param1 = new List <Parameter>();
IList <XYZ> points = (StructuralFrame.Location as LocationCurve).Curve.Tessellate();
XYZ p1 = points[0], p2 = points[1];
// XYZ v = p1 - p2;
double vec_ang1 = 360 - Math.Round(Converter.R2D((p2 - p1).AngleOnPlaneTo(XYZ.BasisX, XYZ.BasisZ)));
vec_ang1 = (vec_ang1 == 360) ? 0.0 : vec_ang1;
XYZ pt1 = StructuralFrame.get_BoundingBox(doc.ActiveView).Min;
XYZ pt2 = StructuralFrame.get_BoundingBox(doc.ActiveView).Max;
double len = (p2 - p1).GetLength() * 0.5;
ElementId BeamSymid = StructuralFrame.GetTypeId();
Element BeamSym = doc.GetElement(BeamSymid);
double wid = BeamSym.GetParameters("Beam Width")[0].AsDouble();
double ht = pt2.Z - pt1.Z;
ViewFamilyType view = Filter.ElementFiltering(doc, typeof(ViewFamilyType), "Section",
"Building Section", null) as ViewFamilyType;
XYZ min = new XYZ(-len - bottomorleftoffset, pt1.Z - 1, -wid);
XYZ max = new XYZ(len + ToporRightoffset, pt2.Z + 1, wid);
XYZ midpt = p1 + (p2 - p1) / 2;
XYZ BeamDir = null;
if (((vec_ang1 >= 0) && (vec_ang1 <= 135)) || ((vec_ang1 >= 315) && (vec_ang1 <= 360)))
{
BeamDir = (p1 - p2).Normalize();
}
else
{
BeamDir = (p2 - p1).Normalize();
}
XYZ up = XYZ.BasisZ;
XYZ viewdir = BeamDir.CrossProduct(up);
Transform t = Transform.Identity;
t.Origin = midpt;
t.BasisX = BeamDir;
t.BasisY = up;
t.BasisZ = viewdir;
BoundingBoxXYZ sectionBox = new BoundingBoxXYZ();
sectionBox.Transform = t;
sectionBox.Min = min;
sectionBox.Max = max;
ViewSection vsec = ViewSection.CreateSection(doc, view.Id, sectionBox);
return(vsec);
}
public static ViewSection CreateSectionAtBottomAndRight(Document doc, XYZ Start_Point, XYZ End_Point,
BoundingBoxXYZ bb, double MaxBeamWidth, double MaxBeamDepth, double bottomorleftoffset, double ToporRightoffset)
{
IList <Parameter> param1 = new List <Parameter>();
// XYZ v = Start_Point - End_Point;
double vec_ang1 = 360 - Math.Round(Converter.R2D((End_Point - Start_Point).AngleOnPlaneTo(XYZ.BasisX, XYZ.BasisZ)));
vec_ang1 = (vec_ang1 == 360) ? 0.0 : vec_ang1;
XYZ pt1 = bb.Min;
XYZ pt2 = bb.Max;
double len = (End_Point - Start_Point).GetLength() * 0.5;
ViewFamilyType view = Filter.ElementFiltering(doc, typeof(ViewFamilyType), "Section",
"Building Section", null) as ViewFamilyType;
XYZ min = new XYZ(-len - bottomorleftoffset, pt1.Z - 1, -MaxBeamWidth);
XYZ max = new XYZ(len + ToporRightoffset, pt2.Z + 1, MaxBeamWidth);
XYZ midpt = Start_Point + (End_Point - Start_Point) / 2;
XYZ BeamDir = null;
if (((vec_ang1 >= 0) && (vec_ang1 <= 135)) || ((vec_ang1 >= 315) && (vec_ang1 <= 360)))
{
BeamDir = (Start_Point - End_Point).Normalize();
}
else
{
BeamDir = (End_Point - Start_Point).Normalize();
}
XYZ up = XYZ.BasisZ;
XYZ viewdir = BeamDir.CrossProduct(up);
Transform t = Transform.Identity;
t.Origin = midpt;
t.BasisX = BeamDir;
t.BasisY = up;
t.BasisZ = viewdir;
BoundingBoxXYZ sectionBox = new BoundingBoxXYZ();
sectionBox.Transform = t;
sectionBox.Min = min;
sectionBox.Max = max;
ViewSection vsec = ViewSection.CreateSection(doc, view.Id, sectionBox);
return(vsec);
}
private static ViewSection CreateSectionView(BoundingBoxXYZ bbox)
{
//http://adndevblog.typepad.com/aec/2012/05/viewplancreate-method.html
IEnumerable <ViewFamilyType> viewFamilyTypes = from elem in new
FilteredElementCollector(dynRevitSettings.Doc.Document).OfClass(typeof(ViewFamilyType))
let type = elem as ViewFamilyType
where type.ViewFamily == ViewFamily.Section
select type;
//create a new view
ViewSection view = ViewSection.CreateSection(dynRevitSettings.Doc.Document, viewFamilyTypes.First().Id, bbox);
return(view);
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
UIApplication uiApp = commandData.Application;
UIDocument uiDoc = uiApp.ActiveUIDocument;
_app = uiApp.Application;
_doc = uiDoc.Document;
Reference reference = uiDoc.Selection.PickObject(ObjectType.Element);
Element element = uiDoc.Document.GetElement(reference);
Wall wall = (Wall)element;
ViewFamilyType vft = new FilteredElementCollector(_doc)
.OfClass(typeof(ViewFamilyType))
.Cast <ViewFamilyType>()
.FirstOrDefault <ViewFamilyType>(x =>
ViewFamily.Section == x.ViewFamily);
// Determine section box
BoundingBoxXYZ sectionBox = GetSectionViewParallelToWall(wall);
//BoundingBoxXYZ sectionBox2 = GetSectionViewPerpendiculatToWall(wall);
// Create wall section view
using (Transaction tx = new Transaction(_doc))
{
tx.Start("Create Wall Section View");
ViewSection.CreateSection(_doc, vft.Id, sectionBox);
//ViewSection.CreateSection(_doc, vft.Id, sectionBox2);
tx.Commit();
}
return(Result.Succeeded);
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
UIApplication uiApp = commandData.Application;
UIDocument uiDoc = uiApp.ActiveUIDocument;
Document doc = uiDoc.Document;
Selection sel = uiApp.ActiveUIDocument.Selection;
//pick a point
XYZ point = sel.PickPoint("pick a point inside a room");
Room room = doc.GetRoomAtPoint(point);
SpatialElementBoundaryOptions options = new SpatialElementBoundaryOptions();
IList <IList <BoundarySegment> > boundaries = room.GetBoundarySegments(options);
//create wall section view
ViewFamilyType vftElevation = new FilteredElementCollector(doc).OfClass(typeof(ViewFamilyType)).Cast <ViewFamilyType>().FirstOrDefault <ViewFamilyType>(x => ViewFamily.Elevation == x.ViewFamily);
ViewFamilyType vftSection = new FilteredElementCollector(doc).OfClass(typeof(ViewFamilyType)).Cast <ViewFamilyType>().FirstOrDefault <ViewFamilyType>(x => ViewFamily.Section == x.ViewFamily);
using (Transaction tx = new Transaction(doc)) {
tx.Start("create wall section view");
for (int i = 0; i < boundaries.Count; i++)
{
for (int j = 0; j < boundaries[i].Count; j++)
{
Wall wall0 = boundaries[i][j].Element as Wall;
BoundingBoxXYZ section = getSectionVewParallelToWall(wall0);
ElevationMarker marker = ElevationMarker.CreateElevationMarker(doc, vftElevation.Id, point, 96);
//ViewPlan viewPlan = ViewPlan.Create(doc, , wall0.LevelId);
//viewPlan.CropBox = section;
ViewSection.CreateSection(doc, vftSection.Id, section);
}
}
tx.Commit();
}
return(Result.Succeeded);
}
/// <summary>
/// Creates a new view section.
/// </summary>
/// <param name="doc"></param>
/// <param name="elmId"></param>
/// <param name="box"></param>
/// <returns></returns>
public static ViewSection CreateViewSection(this Document doc, ElementId elmId, BoundingBoxXYZ box)
{
if (doc == null)
{
throw new ArgumentNullException(nameof(doc));
}
if (elmId == null)
{
throw new ArgumentNullException(nameof(elmId));
}
if (box == null)
{
throw new ArgumentNullException(nameof(box));
}
return(doc.GetElement(elmId) == null ? null : ViewSection.CreateSection(doc, elmId, box));
}
private static ViewSection CreateSectionView(BoundingBoxXYZ bbox)
{
TransactionManager.Instance.EnsureInTransaction(Document);
// (sic) From the Dynamo legacy implementation
var viewFam = DocumentManager.Instance.ElementsOfType <ViewFamilyType>()
.FirstOrDefault(x => x.ViewFamily == ViewFamily.Section);
if (viewFam == null)
{
throw new Exception("There is no three dimensional view family in the document");
}
var viewSection = ViewSection.CreateSection(Document, viewFam.Id, bbox);
TransactionManager.Instance.TransactionTaskDone();
return(viewSection);
}
///在墙的中点,创建剖面///
///
public static View CreatWallSection(Wall wall)
{
Document doc = wall.Document;
LocationCurve lc = wall.Location as LocationCurve;
Line l = lc.Curve as Line;
XYZ midpoint = (l.GetEndPoint(0) + l.GetEndPoint(1)) / 2;
XYZ lineDir = l.Direction;
Transform tsf = Transform.Identity;
tsf.Origin = midpoint;
tsf.BasisZ = lineDir;
tsf.BasisY = XYZ.BasisZ;
tsf.BasisX = -lineDir.CrossProduct(XYZ.BasisZ).Normalize();
Parameter para = wall.LookupParameter("无连接高度");
double z = para.AsDouble();
double width = 400 / 304.8;
double depth = 300 / 308.4;
XYZ min = new XYZ(-width / 2, 0, -depth);
XYZ max = new XYZ(width / 2, z, 0);
BoundingBoxXYZ box = new BoundingBoxXYZ();
box.Transform = tsf;
box.Min = min;
box.Max = max;
ViewFamilyType vft = (new FilteredElementCollector(doc).OfClass(typeof(ViewFamilyType))
.Cast <ViewFamilyType>().Where(m => m.ViewFamily == ViewFamily.Section)).First();
return(ViewSection.CreateSection(doc, vft.Id, box));
}
private void sectionViewBeamZ()
{
UIDocument UiDoc = this.ActiveUIDocument;
Document doc = UiDoc.Document;
//Get element by filler by Id integer of category
List <int> myListIdCategory = new List <int>();
myListIdCategory.Add((int)BuiltInCategory.OST_StructuralFraming);
Reference myRef = UiDoc.Selection.PickObject(ObjectType.Element, new FilterByIdCategory(myListIdCategory), "Pick a Beam...");
Element elem = doc.GetElement(myRef);
ElementId elemTypeId = elem.GetTypeId();
Element elemType = doc.GetElement(elemTypeId);
// Ensure wall is straight
LocationCurve lc = elem.Location as LocationCurve;
// Type view Family
ViewFamilyType vft = new FilteredElementCollector(doc).OfClass(typeof(ViewFamilyType))
.Cast <ViewFamilyType>()
.FirstOrDefault <ViewFamilyType>(x =>
ViewFamily.Section == x.ViewFamily);
#region Create View 2
//Section theo phuong doc dam
// Using 0.5 and "true" to specify that the
// parameter is normalized places the transform
// origin at the center of the location curve
Transform curveTransform = lc.Curve.ComputeDerivatives(0.5, true);
// The transform contains the location curve
// mid-point and tangent, and we can obtain
// its normal in the XY plane:
XYZ origin_Y = curveTransform.Origin; // Set tam cua section View la origin cua curve Transform
XYZ viewdir_Y = curveTransform.BasisX.Normalize(); // view dir da bi xoay di 90 do
XYZ up_Y = XYZ.BasisZ; // Huong len trung voi truc z
XYZ right_Y = up_Y.CrossProduct(viewdir_Y); // right theo tam dien thuan
// Create a transform from vectors above.
Transform transform_Y = Transform.Identity;
transform_Y.Origin = origin_Y;
transform_Y.BasisX = viewdir_Y;
transform_Y.BasisY = right_Y;
transform_Y.BasisZ = up_Y;
BoundingBoxXYZ sectionBoxY = new BoundingBoxXYZ();
sectionBoxY.Transform = transform_Y;
// Xác định điểm offset
using (Transaction myTrans = new Transaction(doc, "Create view section of Beam")) {
myTrans.Start();
ViewSection.CreateSection(doc, vft.Id, sectionBoxY);
myTrans.Commit();
}
#endregion
}
private void sectionViewBeamX(Element myElem)
{
UIDocument UiDoc = this.ActiveUIDocument;
Document doc = UiDoc.Document;
Element elem = myElem;
ElementId elemTypeId = elem.GetTypeId();
Element elemType = doc.GetElement(elemTypeId);
// Element type Name
string nameOfBeam = elem.Name;
//TaskDialog.Show("test2", nameOfBeam);
// Ensure wall is straight
LocationCurve lc = elem.Location as LocationCurve;
Line line = lc.Curve as Line;
// Create section View
// Các tham số để tạo view section
/// <summary>
/// public static ViewSection CreateSection(Document document, ElementId viewFamilyTypeId, BoundingBoxXYZ sectionBox)
/// </summary>
///
//Tao viewFamilytypeId (tham so thu 2)
ViewFamilyType vft = new FilteredElementCollector(doc).OfClass(typeof(ViewFamilyType))
.Cast <ViewFamilyType>()
.FirstOrDefault <ViewFamilyType>(x =>
ViewFamily.Section == x.ViewFamily);
// tao BoundingBox (tham so thu 3)
XYZ p = line.GetEndPoint(0);
XYZ q = line.GetEndPoint(1);
XYZ v = q - p;
//Set boundingBox
BoundingBoxXYZ bb_X = elem.get_BoundingBox(null);
double minZ_X = bb_X.Min.Z;
double maxZ_X = bb_X.Max.Z;
double minY_X = bb_X.Min.Y;
double maxY_X = bb_X.Max.Y;
//lay cac thong so kich thuoc dam
double l = v.GetLength(); // length of beam (endpoint - start Point)
double h = maxZ_X - minZ_X; // h of beam
double b = maxY_X - minY_X; // b of beam
double offset = 0.1 * l; // khoang cach offset
XYZ min = new XYZ(-l / 2 - h, 0 - offset - h, 0);
XYZ max = new XYZ(l / 2 + h, offset, offset);
XYZ midpoint = p + 0.5 * v; // Toa do trung diem
XYZ beamdir = v.Normalize(); // Truc dam
XYZ upX = XYZ.BasisZ; // Huong z thang dung
XYZ viewdirX = beamdir.CrossProduct(upX); // Huong nhin cua View
Transform tX = Transform.Identity;
tX.Origin = midpoint; // Goc view
tX.BasisX = beamdir; // Huong X la trung voi huong beam
tX.BasisY = upX; // Huong y trung voi truc z
tX.BasisZ = viewdirX; // Huong z trung voi huong nhin view (y)
BoundingBoxXYZ sectionBoxX = new BoundingBoxXYZ();
sectionBoxX.Transform = tX;
sectionBoxX.Min = min;
sectionBoxX.Max = max;
using (Transaction myTrans = new Transaction(doc, "Create view section X of Beam")) {
myTrans.Start();
ViewSection vSX = ViewSection.CreateSection(doc, vft.Id, sectionBoxX);
// vSX.Name = nameOfBeam + "_X";
//vSX.ViewName = "ABC";
myTrans.Commit();
}
}
/// <summary>
/// Createsection View for elements
/// </summary>
public void createSectionViewWall()
{
UIDocument uidoc = this.ActiveUIDocument;
Document doc = uidoc.Document;
Reference myRef = uidoc.Selection.PickObject(ObjectType.Element);
Wall wall = doc.GetElement(myRef) as Wall;
// Ensure wall is straight
LocationCurve lc = wall.Location as LocationCurve;
Line line = lc.Curve as Line;
if (null == line)
{
TaskDialog.Show("Error", "Unable to retrieve wall location line.");
return;
}
// Determine view family type to use
ViewFamilyType vft
= new FilteredElementCollector(doc)
.OfClass(typeof(ViewFamilyType))
.Cast <ViewFamilyType>()
.FirstOrDefault <ViewFamilyType>(x =>
ViewFamily.Section == x.ViewFamily);
// Determine section box
XYZ p = line.GetEndPoint(0);
XYZ q = line.GetEndPoint(1);
XYZ v = q - p;
BoundingBoxXYZ bb = wall.get_BoundingBox(null);
double minZ = bb.Min.Z;
double maxZ = bb.Max.Z;
double w = v.GetLength();
double h = maxZ - minZ;
double d = wall.WallType.Width;
double offset = 0.5;
XYZ min = new XYZ(-w, -offset, -offset);
XYZ max = new XYZ(w, h + offset, offset);
XYZ midpoint = p + 0.5 * v;
XYZ walldir = v.Normalize();
XYZ up = XYZ.BasisZ;
XYZ viewdir = walldir.CrossProduct(up);
Transform t = Transform.Identity;
t.Origin = midpoint;
t.BasisX = walldir;
t.BasisY = up;
t.BasisZ = viewdir;
BoundingBoxXYZ sectionBox = new BoundingBoxXYZ();
sectionBox.Transform = t;
sectionBox.Min = min;
sectionBox.Max = max;
// Create wall section view
using (Transaction tx = new Transaction(doc))
{
tx.Start("Create Wall Section View");
ViewSection.CreateSection(doc, vft.Id, sectionBox);
tx.Commit();
}
}
/// <summary>
/// Adds the new view section.
/// </summary>
/// <param name="doc"></param>
/// <param name="elmId"></param>
/// <param name="box"></param>
/// <returns></returns>
public static ViewSection AddViewSection(this Document doc, ElementId elmId, BoundingBoxXYZ box)
{
return(doc.GetElement(elmId) == null ? null : ViewSection.CreateSection(doc, elmId, box));
}
/// <summary>
/// Returns the cut lines.
/// </summary>
/// <param name="viewId">The view identifier.</param>
public static void CutLines(ElementId viewId)
{
Utils.Log(string.Format("UtilsSectionView.CutLines started...", ""));
var uidoc = DocumentManager.Instance.CurrentUIDocument;
var doc = uidoc.Document;
var view = doc.GetElement(viewId) as View;
var app = doc.Application;
Options opt = new Options();
opt.View = view;
BoundingBoxXYZ crop = view.CropBox;
IList <DetailCurve> detailCurves = new List <DetailCurve>();
IList <Curve> linkedCurves = new List <Curve>();
Transform tr = view.CropBox.Transform;
string path = Path.Combine(Path.GetTempPath(), "Copy.rvt");
var rliCollection = new FilteredElementCollector(doc)
.OfClass(typeof(RevitLinkInstance))
.WhereElementIsNotElementType()
.Cast <RevitLinkInstance>();
Document link = null;
RevitServices.Transactions.TransactionManager.Instance.ForceCloseTransaction();
CloseCopy();
Utils.Log(string.Format("Preparing Revit Links...", ""));
if (rliCollection.Count() > 0)
{
#region RevitLinkInstances
foreach (RevitLinkInstance rli in rliCollection)
{
ElementId efrId = rli.GetTypeId();
var status = ExternalFileUtils.GetExternalFileReference(doc, efrId).GetLinkedFileStatus();
Utils.Log(string.Format("Status {0}...", status));
if (status == LinkedFileStatus.InClosedWorkset ||
status == LinkedFileStatus.Invalid ||
status == LinkedFileStatus.LocallyUnloaded ||
status == LinkedFileStatus.NotFound ||
status == LinkedFileStatus.Unloaded)
{
continue;
}
app.CopyModel(ModelPathUtils.ConvertUserVisiblePathToModelPath(rli.GetLinkDocument().PathName), path, true);
link = app.OpenDocumentFile(path);
// access projectlocations
// test if the the project location in the host file exists in the linked document
// if exists retrieve the transform object via project position
// apply the transform to the total transform of the revit link instance
Utils.Log(string.Format("Processing {0}...", path));
Transform rliTransform = rli.GetTotalTransform();
// TODO: include angle in the calculation
// TODO: include different project location from the Link Instance
// TODO: test for different locations of the same instance
tr.Origin = rliTransform.Inverse.OfPoint(view.Origin);
tr.BasisX = rliTransform.Inverse.OfVector(-view.RightDirection);
tr.BasisY = XYZ.BasisZ;
tr.BasisZ = tr.BasisX.CrossProduct(tr.BasisY);
BoundingBoxXYZ bb = new BoundingBoxXYZ();
bb.Transform = tr;
XYZ min = view.CropBox.Min;
XYZ max = view.CropBox.Max;
bb.Min = new XYZ(min.X, min.Y, 0);
bb.Max = new XYZ(max.X, max.Y, -min.Z);
IList <ElementId> detailCurveIds = new List <ElementId>();
var linkedViewId = ElementId.InvalidElementId;
// TODO: create other view family types, currently works only for sections
using (Transaction q = new Transaction(link, "Cut1"))
{
q.Start();
ElementId vftId = new FilteredElementCollector(link)
.OfClass(typeof(ViewFamilyType))
.WhereElementIsElementType()
.Cast <ViewFamilyType>()
.First(x => x.ViewFamily == ViewFamily.Section)
.Id;
View linkedView = ViewSection.CreateSection(link, vftId, bb);
link.Regenerate();
foreach (Curve c in CutCurvesInView(link, linkedView.Id))
{
//linkedCurves.Add(c.CreateTransformed(Transform.CreateTranslation(translation)));
linkedCurves.Add(c.CreateTransformed(rliTransform));
}
q.RollBack();
}
link.Close(false);
Utils.Log(string.Format("Completed", ""));
}
#endregion
}
Utils.Log(string.Format("Processing current document...", ""));
using (Transaction t = new Transaction(doc, "Cut"))
{
t.Start();
#region Current Document Detail Curves
IList <ElementId> toDelete = new List <ElementId>();
foreach (Group g in new FilteredElementCollector(doc, view.Id)
.OfClass(typeof(Group))
.WhereElementIsNotElementType()
.Cast <Group>()
.Where(x => x.GroupType.Name == view.Name))
{
g.Pinned = false;
toDelete.Add(g.Id);
}
if (toDelete.Count > 0)
{
doc.Delete(toDelete);
toDelete.Clear();
}
Utils.Log(string.Format("Deleted {0} groups.", toDelete.Count));
GraphicsStyle gs = new FilteredElementCollector(doc)
.OfClass(typeof(GraphicsStyle))
.WhereElementIsNotElementType()
.Cast <GraphicsStyle>()
.First(x => x.GraphicsStyleCategory.Name == "Medium Lines"); // TODO make it usable for different languages as well
Utils.Log(string.Format("Preparing for extracting curves...", ""));
foreach (Curve c in CutCurvesInView(doc, view.Id))
{
try
{
var dc = doc.Create.NewDetailCurve(view, c);
if (null != dc)
{
detailCurves.Add(dc);
}
}
catch
{
continue;
}
}
if (linkedCurves.Count > 0)
{
foreach (Curve c in linkedCurves.Where(x => x.Length > doc.Application.ShortCurveTolerance))
{
try
{
var dc = doc.Create.NewDetailCurve(view, c);
if (null != dc)
{
detailCurves.Add(dc);
}
}
catch
{
continue;
}
}
}
foreach (DetailCurve dc in detailCurves)
{
dc.LineStyle = gs;
}
// this is necessary otherwise a warning pops up for editing a group outside of scope
doc.Regenerate();
#endregion
#region Group
foreach (GroupType gt in new FilteredElementCollector(doc)
.OfClass(typeof(GroupType))
.WhereElementIsElementType()
.Where(x => x.Name == view.Name))
{
toDelete.Add(gt.Id);
}
if (toDelete.Count > 0)
{
doc.Delete(toDelete);
}
if (detailCurves.Count > 0)
{
Group g = doc.Create.NewGroup(detailCurves.Select(x => x.Id).ToList());
g.GroupType.Name = view.Name;
g.Pinned = true;
}
#endregion
t.Commit();
}
CloseCopy();
Utils.Log(string.Format("UtilsSectionView.CutLines completed.", ""));
}
void f()
{
NyViewSectionB = ViewSection.CreateSection(
doc.Document, SectionId, bbNewSectionF);
}
private View CreateViewAndSectionMark(UIDocument uidoc, Element e)
{
Document doc = uidoc.Document;
Wall wall = e as Wall;
// Ensure wall is straight
LocationCurve lc = wall.Location as LocationCurve;
Line line = lc.Curve as Line;
if (null == line)
{
TaskDialog.Show("Error", "Unable to retrieve wall location line.");
//return;
}
// Determine view family type to use
ViewFamilyType vft
= new FilteredElementCollector(doc)
.OfClass(typeof(ViewFamilyType))
.Cast <ViewFamilyType>()
.FirstOrDefault <ViewFamilyType>(x =>
ViewFamily.Section == x.ViewFamily);
XYZ p = line.GetEndPoint(0);
XYZ q = line.GetEndPoint(1);
XYZ v = q - p;
//Gets the bounding box of the wall
BoundingBoxXYZ bb = wall.get_BoundingBox(null);
double minZ = bb.Min.Z;
double maxZ = bb.Max.Z;
//gets the width and height of the wall
double w = v.GetLength();
double h = maxZ - minZ;
//this is the bottom left and upper right coordinate of the viewport window. the Z value also sets the depth of the view
XYZ max = new XYZ(0.5 * w, maxZ, 1);
XYZ min = new XYZ(0.5 * -w, minZ, -1);
Transform localcoordinates = HelperClass.getLocalCoordinates(e, StructSelected, uidoc);
//Create a new bounding box. this box will define the limits of the section mark
BoundingBoxXYZ sectionBox = new BoundingBoxXYZ();
sectionBox.Transform = localcoordinates;
sectionBox.Min = min;
sectionBox.Max = max;
// Create wall section view
View view = null;
using (Transaction tx = new Transaction(doc))
{
tx.Start("Create Wall Section View");
view = ViewSection.CreateSection(doc, vft.Id, sectionBox) as View;
//cropbox is turned off so all elements get hidden when passing the active view filter
view.CropBoxActive = false;
tx.Commit();
}
return(view);
}
public Result Execute(
ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Autodesk.Revit.ApplicationServices.Application app = uiapp.Application;
Document doc = uidoc.Document;
Selection sel = uidoc.Selection;
var form_to_show = new LoadExcel(uiapp);
form_to_show.ShowDialog();
View3D view = doc.ActiveView as View3D;
if (null == view)
{
message = "Please run this command in a 3D view.";
return(Result.Failed);
}
Element scopeBox
= new FilteredElementCollector(doc, view.Id)
.OfCategory(BuiltInCategory.OST_VolumeOfInterest)
.WhereElementIsNotElementType()
.FirstElement();
ElementId scopeBoxName = scopeBox.Id;
BoundingBoxXYZ viewScopeBox
= GenerateBoundingBoxXYZ(scopeBox);
//set up view family type - have to play with this one more
ViewFamilyType vft
= new FilteredElementCollector(doc)
.OfClass(typeof(ViewFamilyType))
.Cast <ViewFamilyType>()
.FirstOrDefault <ViewFamilyType>(x =>
ViewFamily.Section == x.ViewFamily);
string filenametemp = get_str();
//make the transaction; should add more sections here later;
using (Transaction tx = new Transaction(doc))
{
tx.Start("Move And Resize Section Box");
ViewSection section = ViewSection.CreateSection(doc, vft.Id, viewScopeBox);
section.get_Parameter(BuiltInParameter.VIEWER_VOLUME_OF_INTEREST_CROP).Set(scopeBoxName);
section.get_Parameter(BuiltInParameter.VIEW_NAME).Set(get_str());
GetTitleBlocks(doc);
GenerateSheet(doc, section);
//view.SetSectionBox(viewScopeBox);
tx.Commit();
}
return(Result.Succeeded);
}
public static void Draw(Document doc, Element elem, String Section_Name,
double LeftOffset, double RightOffset, double TopOffset, double BottomOffset, double NearClipOffset, double FarClipOffset)
{
ElementId elemid = elem.Id; //= refe.ElementId;
XYZ Cen_pt = ((LocationPoint)elem.Location).Point;
XYZ Y_Plane = new XYZ(0, -1, 0);
ViewFamilyType view = KJU.Filter.ElementFiltering(doc, typeof(ViewFamilyType),
"Section", Section_Name, null) as ViewFamilyType;
FamilyInstance inst = elem as FamilyInstance;
Transform tr = inst.GetTransform();
Parameter Elec_PanelName = inst.get_Parameter(BuiltInParameter.RBS_ELEC_PANEL_NAME);
string Elec_Equipment_Name = null;
Room room = inst.Room;
if (null != room)
{
Elec_Equipment_Name =
room.Name.Substring(0, room.Name.Length - room.Number.Length - 1)
+ "-"
+ inst.get_Parameter(BuiltInParameter.ALL_MODEL_MARK).AsString();
}
else
{
Elec_Equipment_Name = "Exterior" + "-"
+ inst.get_Parameter(BuiltInParameter.ALL_MODEL_MARK).AsString();
}
double Half_Width = inst.GetParameters("##Width")[0].AsDouble() / 2.0,
Half_Height = inst.GetParameters("##Height")[0].AsDouble() / 2.0;
XYZ Right_Dir = tr.BasisX;
XYZ St_Pt = tr.Origin - Right_Dir * Half_Width,
End_Pt = tr.Origin + Right_Dir * Half_Width;
XYZ v = St_Pt - End_Pt;
double X_Angle = (End_Pt - St_Pt).AngleOnPlaneTo(XYZ.BasisX, XYZ.BasisZ);
//TaskDialog.Show("Angle","Angle = " + Math.Round(X_Angle * 180 / Math.PI,5).ToString()
// + " --- " + Elec_Equipment_Name);
XYZ Min = new XYZ(-(Half_Width + LeftOffset), -(Half_Height + BottomOffset), NearClipOffset);
XYZ Max = new XYZ(Half_Width + RightOffset, Half_Height + TopOffset, FarClipOffset);
XYZ Orgin = End_Pt + 0.5 * v;
XYZ X_Dir = v.Normalize();
XYZ Up_Dir = XYZ.BasisZ;
XYZ View_Dir = X_Dir.CrossProduct(Up_Dir);
Transform Sec_Tr = Transform.Identity;
Sec_Tr.Origin = Orgin;
Sec_Tr.BasisX = X_Dir;
Sec_Tr.BasisY = Up_Dir;
Sec_Tr.BasisZ = View_Dir;
BoundingBoxXYZ sectionBox = new BoundingBoxXYZ();
sectionBox.Transform = Sec_Tr;
sectionBox.Min = Min;
sectionBox.Max = Max;
ViewSection vs = null;
using (Transaction tn = new Transaction(doc))
{
tn.Start("Section");
try
{
vs = ViewSection.CreateSection(doc, view.Id, sectionBox);
Elec_PanelName.Set(Elec_Equipment_Name);
vs.Name = inst.get_Parameter(BuiltInParameter.RBS_ELEC_PANEL_NAME).AsString();
tn.Commit();
}
catch (Exception)
{ return; }
}
}
private Result pipeSection(Document doc, Pipe pipe)
{
LocationCurve lc = pipe.Location as LocationCurve;
Curve curve = lc.Curve as Curve;
if (null == curve)
{
TaskDialog.Show("...", "Unable to retrieve pipe location line.");
return(Result.Failed);
}
// Determine view family type to use
ViewFamilyType vft
= new FilteredElementCollector(doc)
.OfClass(typeof(ViewFamilyType))
.Cast <ViewFamilyType>()
.FirstOrDefault <ViewFamilyType>(x =>
ViewFamily.Section == x.ViewFamily);
// Determine section box
XYZ p = curve.GetEndPoint(0);
XYZ q = curve.GetEndPoint(1);
XYZ v = q - p;
XYZ v2 = new XYZ(v.X, v.Y, 0);
BoundingBoxXYZ bb = pipe.get_BoundingBox(null);
double minZ = bb.Min.Z;
double maxZ = bb.Max.Z;
double avg = (maxZ - minZ) / 2;
double w = v.GetLength();
double h = maxZ - minZ;
double d = pipe.Diameter;
double offset = 0.1 * w;
XYZ min = new XYZ(-w / 2 - side, -avg - above, -offset);
XYZ max = new XYZ(w / 2 + side, avg + above, 3);
XYZ ductdir = v2.Normalize();
XYZ up = XYZ.BasisZ;
XYZ viewdir = ductdir.CrossProduct(up);
XYZ midpoint = p + 0.5 * v;
Transform t = Transform.Identity;
t.Origin = midpoint;
t.BasisX = ductdir;
t.BasisY = up;
t.BasisZ = viewdir;
BoundingBoxXYZ sectionBox = new BoundingBoxXYZ();
try
{
sectionBox.Transform = t;
sectionBox.Min = min;
sectionBox.Max = max;
}
catch (Exception ex)
{
using (Transaction tx = new Transaction(doc))
{
tx.Start("Create pipe Section View");
if (SectionConfigForm.vft == null)
{
viewSec = ViewSection.CreateSection(doc, vft.Id, sectionBox);
}
else
{
viewSec = ViewSection.CreateSection(doc, SectionConfigForm.vft.Id, sectionBox);
}
tx.Commit();
}
}
using (Transaction tx = new Transaction(doc))
{
tx.Start("Create pipe Section View");
if (SectionConfigForm.vft == null)
{
viewSec = ViewSection.CreateSection(doc, vft.Id, sectionBox);
}
else
{
viewSec = ViewSection.CreateSection(doc, SectionConfigForm.vft.Id, sectionBox);
}
tx.Commit();
}
return(Result.Succeeded);
}
public static ViewSection CreateWallSection(Document linkedDoc, Document doc, Polygon directPolygon, ElementId id, string viewName, double offset)
{
Element e = linkedDoc.GetElement(id);
if (!(e is Wall))
{
throw new Exception("Element is not a wall!");
}
Wall wall = (Wall)e;
Line line = (wall.Location as LocationCurve).Curve as Line;
ViewFamilyType vft = new FilteredElementCollector(doc).OfClass(typeof(ViewFamilyType)).Cast <ViewFamilyType>().FirstOrDefault <ViewFamilyType>(x => ViewFamily.Section == x.ViewFamily);
XYZ p1 = line.GetEndPoint(0), p2 = line.GetEndPoint(1);
List <XYZ> ps = new List <XYZ> {
p1, p2
}; ps.Sort(new ZYXComparer());
p1 = ps[0]; p2 = ps[1];
BoundingBoxXYZ bb = wall.get_BoundingBox(null);
double minZ = bb.Min.Z, maxZ = bb.Max.Z;
double l = GeomUtil.GetLength(GeomUtil.SubXYZ(p2, p1));
double h = maxZ - minZ;
double w = wall.WallType.Width;
XYZ tfMin = new XYZ(-l / 2 - offset, minZ - offset, -w - offset);
XYZ tfMax = new XYZ(l / 2 + offset, maxZ + offset, w + offset);
XYZ wallDir = GeomUtil.UnitVector(p2 - p1);
XYZ upDir = XYZ.BasisZ;
XYZ viewDir = GeomUtil.CrossMatrix(wallDir, upDir);
XYZ midPoint = (p1 + p2) / 2;
XYZ pMidPoint = GetProjectPoint(directPolygon.Plane, midPoint);
XYZ pPnt = GeomUtil.OffsetPoint(pMidPoint, viewDir, w * 10);
if (GeomUtil.IsBigger(GeomUtil.GetLength(pMidPoint, directPolygon.CentralXYZPoint), GeomUtil.GetLength(pPnt, directPolygon.CentralXYZPoint)))
{
wallDir = -wallDir;
upDir = XYZ.BasisZ;
viewDir = GeomUtil.CrossMatrix(wallDir, upDir);
}
else
{
}
pPnt = GeomUtil.OffsetPoint(p1, wallDir, offset);
XYZ min = null, max = null;
if (GeomUtil.IsBigger(GeomUtil.GetLength(GeomUtil.SubXYZ(pPnt, midPoint)), GeomUtil.GetLength(GeomUtil.SubXYZ(p1, midPoint))))
{
min = GeomUtil.OffsetPoint(GeomUtil.OffsetPoint(p1, wallDir, offset), -viewDir, offset);
max = GeomUtil.OffsetPoint(GeomUtil.OffsetPoint(p2, -wallDir, offset), viewDir, offset);
}
else
{
min = GeomUtil.OffsetPoint(GeomUtil.OffsetPoint(p1, -wallDir, offset), -viewDir, offset);
max = GeomUtil.OffsetPoint(GeomUtil.OffsetPoint(p2, wallDir, offset), viewDir, offset);
}
min = new XYZ(min.X, min.Y, minZ - offset);
max = new XYZ(max.X, max.Y, maxZ + offset);
Transform tf = Transform.Identity;
tf.Origin = (p1 + p2) / 2;
tf.BasisX = wallDir;
tf.BasisY = XYZ.BasisZ;
tf.BasisZ = GeomUtil.CrossMatrix(wallDir, upDir);
BoundingBoxXYZ sectionBox = new BoundingBoxXYZ()
{
Transform = tf, Min = tfMin, Max = tfMax
};
ViewSection vs = ViewSection.CreateSection(doc, vft.Id, sectionBox);
tf = vs.get_BoundingBox(null).Transform.Inverse;
max = tf.OfPoint(max);
min = tf.OfPoint(min);
double maxx = 0, maxy = 0, maxz = 0, minx = 0, miny = 0, minz = 0;
if (max.Z > min.Z)
{
maxz = max.Z;
minz = min.Z;
}
else
{
maxz = min.Z;
minz = max.Z;
}
if (Math.Round(max.X, 4) == Math.Round(min.X, 4))
{
maxx = max.X;
minx = minz;
}
else if (max.X > min.X)
{
maxx = max.X;
minx = min.X;
}
else
{
maxx = min.X;
minx = max.X;
}
if (Math.Round(max.Y, 4) == Math.Round(min.Y, 4))
{
maxy = max.Y;
miny = minz;
}
else if (max.Y > min.Y)
{
maxy = max.Y;
miny = min.Y;
}
else
{
maxy = min.Y;
miny = max.Y;
}
BoundingBoxXYZ sectionView = new BoundingBoxXYZ();
sectionView.Max = new XYZ(maxx, maxy, maxz);
sectionView.Min = new XYZ(minx, miny, minz);
vs.get_Parameter(BuiltInParameter.VIEWER_VOLUME_OF_INTEREST_CROP).Set(ElementId.InvalidElementId);
vs.get_Parameter(BuiltInParameter.VIEWER_BOUND_FAR_CLIPPING).Set(0);
vs.CropBoxActive = true;
vs.CropBoxVisible = true;
doc.Regenerate();
vs.CropBox = sectionView;
vs.Name = viewName;
return(vs);
}
//*****************************CreateSectionStart()*****************************
public void CreateSectionStart(Document doc, UIDocument uidoc)
{
// My library
LibraryGetItems libGet = new LibraryGetItems();
Element e = libGet.SelectElement(uidoc, doc);
Wall wall = null;
if (e != null)
{
wall = e as Wall;
}
// Create a BoundingBoxXYZ instance centered on wall
BoundingBoxXYZ bb = wall.get_BoundingBox(null);
double minZ = bb.Min.Z;
double maxZ = bb.Max.Z;
double h = maxZ - minZ;
Level level = doc.ActiveView.GenLevel;
double top = 90 - level.Elevation;
double bottom = -(level.Elevation + 25);
LocationCurve lc = wall.Location as LocationCurve;
Line line = lc.Curve as Line;
XYZ p = line.GetEndPoint(0);
XYZ q = line.GetEndPoint(1);
XYZ v = p - q; // p point 0 - q point 1 - view direction up.
double halfLength = v.GetLength() / 2;
double offset = 3; // offset by 3 feet.
//Max/Min X = Section line Length, Max/Min Y is the height of the section box, Max/Min Z far clip
XYZ min = new XYZ(-halfLength, bottom, -offset);
XYZ max = new XYZ(halfLength, top, offset);
XYZ midpoint = q + 0.5 * v; // q get lower midpoint.
XYZ walldir = v.Normalize();
XYZ up = XYZ.BasisZ;
XYZ viewdir = walldir.CrossProduct(up);
Transform t = Transform.Identity;
t.Origin = midpoint;
t.BasisX = walldir;
t.BasisY = up;
t.BasisZ = viewdir;
BoundingBoxXYZ sectionBox = new BoundingBoxXYZ();
sectionBox.Transform = t;
sectionBox.Min = min; // scope box start
sectionBox.Max = max; // scope box end
ViewFamilyType vft = viewFamilyType(doc);
View viewTemplate = libGet.GetViewTemplate(doc, "Z-ELEV ARCH OFF");
ViewSection vs = null;
//Create wall section view
using (Transaction tx = new Transaction(doc))
{
try
{
tx.Start("Create Section");
vs = ViewSection.CreateSection(doc, vft.Id, sectionBox);
tx.Commit();
}
catch { }
}
using (Transaction tr = new Transaction(doc))
{
try
{
tr.Start("Apply Structural View Template");
vs.ViewTemplateId = viewTemplate.Id;
vs.Scale = 24;
tr.Commit();
}
catch { }
}
}
//*****************************CreateSectionPerpendicular()*****************************
public void CreateSectionPerpendicular(Document doc, UIDocument uidoc)
{
// My library
LibraryGetItems libGet = new LibraryGetItems();
Element e = libGet.SelectElement(uidoc, doc);
Wall wall = null;
if (e != null)
{
wall = e as Wall;
}
LocationCurve lc = wall.Location as LocationCurve;
Transform curveTransform = lc.Curve.ComputeDerivatives(0.5, true);
// The transform contains the location curve
// mid-point and tangent, and we can obtain
// its normal in the XY plane:
XYZ origin = curveTransform.Origin;
XYZ viewdir = curveTransform.BasisX.Normalize();
XYZ up = XYZ.BasisZ;
XYZ right = up.CrossProduct(viewdir);
// Set up view transform, assuming wall's "up"
// is vertical. For a non-vertical situation
// such as section through a sloped floor, the
// surface normal would be needed
Transform transform = Transform.Identity;
transform.Origin = origin;
transform.BasisX = right;
transform.BasisY = up;
transform.BasisZ = viewdir;
BoundingBoxXYZ sectionBox = new BoundingBoxXYZ();
sectionBox.Transform = transform;
// Min & Max X values define the section
// line length on each side of the wall.
// Max Y is the height of the section box.
// Max Z (5) is the far clip offset.
double d = wall.WallType.Width;
BoundingBoxXYZ bb = wall.get_BoundingBox(null);
double minZ = bb.Min.Z;
double maxZ = bb.Max.Z;
double h = maxZ - minZ;
// Z value offset from the current level in view.
Level level = doc.ActiveView.GenLevel;
double top = 90 - level.Elevation;
double bottom = -(level.Elevation + 25);
sectionBox.Min = new XYZ(-2 * d, bottom, 0);
sectionBox.Max = new XYZ(2 * d, top, 5);
ViewFamilyType vft = viewFamilyType(doc);
View viewTemplate = libGet.GetViewTemplate(doc, "Z-ELEV ARCH OFF");
ViewSection vs = null;
//Create wall section view
using (Transaction tx = new Transaction(doc))
{
try
{
tx.Start("Create Section");
vs = ViewSection.CreateSection(doc, vft.Id, sectionBox);
doc.Regenerate();
tx.Commit();
}
catch { }
}
using (Transaction t = new Transaction(doc))
{
try
{
t.Start("Apply Structural View Template");
vs.ViewTemplateId = viewTemplate.Id;
vs.Scale = 24;
t.Commit();
}
catch { }
}
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
#region//Utils
StringBuilder sb = new StringBuilder();
Collector collector = new Collector();
LengthUnitConverter converter = new LengthUnitConverter();
#endregion
#region//Application context
UIDocument uidoc = commandData.Application.ActiveUIDocument;
Document doc = uidoc.Document;
#endregion
#region//Check if current project is family
if (doc.IsFamilyDocument)
{
Message.Display("Can't use command in family document", WindowType.Warning);
return(Result.Cancelled);
}
#endregion
#region//Select elements
List <Element> genericModelList = collector.GetGenericModels(doc);
List <Element> List_GenericModels = new List <Element>();
List <string> List_GenericModelStrings = new List <string>();
FamilyInstance familyInstance = null;
foreach (Element genericModel in genericModelList)
{
familyInstance = doc.GetElement(genericModel.Id) as FamilyInstance;
if (familyInstance.SuperComponent == null)
{
if (List_GenericModelStrings.Contains(genericModel.Name))
{
}
else
{
List_GenericModels.Add(genericModel);
List_GenericModelStrings.Add(genericModel.Name);
}
}
}
#endregion
#region//Check if list of generic models is empty
if (List_GenericModels.Count == 0)
{
Message.Display("There aren't any generic models in the project", WindowType.Warning);
return(Result.Cancelled);
}
#endregion
#region//Execute task for each generic model
foreach (Element genericModel in List_GenericModels)
{
FamilyInstance genericModelFamily = doc.GetElement(genericModel.Id) as FamilyInstance;
FamilySymbol genericModelSymbol = genericModelFamily.Symbol;
#region //Get type parameters of element
string MDK_merk = genericModelSymbol.LookupParameter("MDK_merk").AsString();
#endregion
#region //Get nested family
FamilyInstance nestedFamily = null;
string nestedFamilyName = "Profiel_1";
List <double> nestedFamilyOriginZ = new List <double>();
List <FamilyInstance> nestedFamilies = new List <FamilyInstance>();
FamilyInstance familyContainer = null;
LocationCurve curveContainer = null;
Line lineContainer = null;
ICollection <ElementId> subComponentIds = genericModelFamily.GetSubComponentIds();
foreach (ElementId id in subComponentIds)
{
if (doc.GetElement(id).Name == nestedFamilyName)
{
nestedFamilies.Add(doc.GetElement(id) as FamilyInstance);
familyContainer = doc.GetElement(id) as FamilyInstance;
curveContainer = familyContainer.Location as LocationCurve;
lineContainer = curveContainer.Curve as Line;
nestedFamilyOriginZ.Add(lineContainer.Origin.Z);
}
}
double minValue = int.MaxValue;
int minIndex;
int index = -1;
foreach (double num in nestedFamilyOriginZ)
{
index++;
if (num <= minValue)
{
minValue = num;
minIndex = index;
}
}
nestedFamily = nestedFamilies[index];
if (nestedFamily == null)
{
Message.Display("There isn't a nested family in the element with the specified name.", WindowType.Error);
return(Result.Cancelled);
}
#endregion
#region//Get direction of family
LocationCurve locationCurve = nestedFamily.Location as LocationCurve;
Line locationLine = locationCurve.Curve as Line;
XYZ dir = locationLine.Direction.Normalize();;
#endregion
#region//Create Boundingbox
XYZ lineStart = locationLine.GetEndPoint(0);
XYZ lineEnd = locationLine.GetEndPoint(1);
XYZ lineDifference = lineEnd - lineStart;
BoundingBoxXYZ genicModelbb = genericModel.get_BoundingBox(null);
double minZ = genicModelbb.Min.Z;
double maxZ = genicModelbb.Max.Z;
double width = lineDifference.GetLength();
double height = maxZ - minZ;
double thickness = converter.ConvertToFeet(500);
double offset = converter.ConvertToFeet(500);
XYZ min = new XYZ(-width - converter.ConvertToFeet(1000), minZ - offset, -offset);
XYZ max = new XYZ(width, maxZ + offset, +offset);
XYZ midpoint = lineStart + 0.5 * lineDifference;
XYZ up = XYZ.BasisZ;
XYZ viewDir = dir.CrossProduct(up);
Transform t = Transform.Identity;
t.Origin = midpoint;
t.BasisX = dir;
t.BasisY = up;
t.BasisZ = viewDir;
BoundingBoxXYZ boundingBox = new BoundingBoxXYZ();
boundingBox.Transform = t;
boundingBox.Min = min;
boundingBox.Max = max;
#endregion
#region//Get viewFamilyType
ViewFamilyType viewFamily = collector.GetViewFamilyType(doc, ViewFamily.Section).FirstOrDefault();
#endregion
#region //Create Section
using (Transaction tx = new Transaction(doc))
{
tx.Start("Create Section");
ViewSection section = ViewSection.CreateSection(doc, viewFamily.Id, boundingBox);
section.Name = genericModel.Name;
section.Scale = 50;
section.CropBoxVisible = false;
section.get_Parameter(BuiltInParameter.SECTION_COARSER_SCALE_PULLDOWN_METRIC).Set(1);
section.LookupParameter("Subdiscipline").Set("LEGEND");
tx.Commit();
}
#endregion
}
#endregion
#region//Get all section views
List <View> sectionViewList = collector.GetViews(doc, ViewType.Section);
List <View> List_SectionViews = new List <View>();
foreach (View sectionView in sectionViewList)
{
if (sectionView.Name.Contains("Kozijn"))
{
List_SectionViews.Add(sectionView);
}
}
#endregion
#region//Execute task for each sectionView
foreach (View sectionView in List_SectionViews)
{
#region//Get DimensionType
DimensionType genericModelDimension = collector.GetLinearDimensionTypeByName(doc, "hoofdmaatvoering");
DimensionType nestedFamilyDimension = collector.GetLinearDimensionTypeByName(doc, "stelkozijn");
#endregion
#region//Get directions for dimensions
XYZ widthDirection = sectionView.RightDirection.Normalize();
XYZ heigthDirection = new XYZ(0, 0, 1);
#endregion
#region//Select elements
List <Element> genericModelInViewList = collector.GetGenericModels(doc, sectionView.Id);
List <Element> List_GenericModelsInView = new List <Element>();
FamilyInstance familyInstanceInView = null;
foreach (Element genericModel in genericModelInViewList)
{
familyInstanceInView = doc.GetElement(genericModel.Id) as FamilyInstance;
if (familyInstanceInView.SuperComponent == null)
{
List_GenericModelsInView.Add(genericModel);
}
}
#endregion
#region//Execute task for each generic model
foreach (Element genericModel in List_GenericModelsInView)
{
FamilyInstance genericModelFamily = doc.GetElement(genericModel.Id) as FamilyInstance;
FamilySymbol genericModelSymbol = genericModelFamily.Symbol;
#region//Get nested family 1
string nestedFamilyName1 = "31_MDK_GM_stelkozijn_lijn";
FamilyInstance nestedFamily1 = null;
ICollection <ElementId> subComponentIds1 = genericModelFamily.GetSubComponentIds();
foreach (ElementId id in subComponentIds1)
{
if (doc.GetElement(id).Name == nestedFamilyName1)
{
nestedFamily1 = doc.GetElement(id) as FamilyInstance;
}
}
#endregion
#region//Get nested family 2
FamilyInstance nestedFamily2 = null;
string nestedFamilyName2 = "Profiel_1";
List <double> nestedFamilyOriginZ = new List <double>();
List <FamilyInstance> nestedFamilies = new List <FamilyInstance>();
FamilyInstance familyContainer = null;
LocationCurve curveContainer = null;
Line lineContainer = null;
ICollection <ElementId> subComponentIds2 = genericModelFamily.GetSubComponentIds();
foreach (ElementId id in subComponentIds2)
{
if (doc.GetElement(id).Name == nestedFamilyName2)
{
nestedFamilies.Add(doc.GetElement(id) as FamilyInstance);
familyContainer = doc.GetElement(id) as FamilyInstance;
curveContainer = familyContainer.Location as LocationCurve;
lineContainer = curveContainer.Curve as Line;
nestedFamilyOriginZ.Add(lineContainer.Origin.Z);
}
}
double minValue = int.MaxValue;
int minIndex;
int index = -1;
foreach (double num in nestedFamilyOriginZ)
{
index++;
if (num <= minValue)
{
minValue = num;
minIndex = index;
}
}
nestedFamily2 = nestedFamilies[index];
if (nestedFamily2 == null)
{
Message.Display("There isn't a nested family in the element with the specified name.", WindowType.Error);
return(Result.Cancelled);
}
#endregion
#region//Get type parameters of element
double MDK_breedte = genericModelSymbol.LookupParameter("MDK_breedte").AsDouble();
#endregion
#region//Get instance parameters of element
double MDK_offset_vooraanzicht = genericModelFamily.LookupParameter("MDK_offset_vooraanzicht").AsDouble();
#endregion
#region//Get direction of family
LocationCurve locationCurve = nestedFamily2.Location as LocationCurve;
Line locationLine = locationCurve.Curve as Line;
XYZ dir = locationLine.Direction.Normalize();;
#endregion
#region//Check if generic model is in same direction as view
double genericModelAngle = Math.Round(Math.Atan2(dir.Y, dir.X) * (180 / Math.PI), 5);
double activeViewAngle = Math.Round(Math.Atan2(widthDirection.Y, widthDirection.X) * (180 / Math.PI), 5);
if (genericModelAngle <= 0)
{
genericModelAngle = genericModelAngle + 180;
}
else
{
genericModelAngle = genericModelAngle - 180;
}
if (genericModelAngle != activeViewAngle)
{
Message.Display("The generic model isn't parallel to the active view.", WindowType.Error);
return(Result.Cancelled);
}
#endregion
#region//Get locationpoint of selected element
LocationPoint location = genericModelFamily.Location as LocationPoint;
XYZ locationpoint = location.Point;
#endregion
#region// Get references which refer to the reference planes in the family
ReferenceArray genericModelHeightref = new ReferenceArray();
ReferenceArray genericModelWidthref = new ReferenceArray();
ReferenceArray nestedFamilyHeightref = new ReferenceArray();
ReferenceArray nestedFamilyWidthref = new ReferenceArray();
foreach (var e in genericModelFamily.GetReferences(FamilyInstanceReferenceType.Top))
{
genericModelHeightref.Append(e);
}
foreach (var e in genericModelFamily.GetReferences(FamilyInstanceReferenceType.Bottom))
{
genericModelHeightref.Append(e);
}
foreach (var e in genericModelFamily.GetReferences(FamilyInstanceReferenceType.StrongReference))
{
genericModelWidthref.Append(e);
}
foreach (var e in nestedFamily1.GetReferences(FamilyInstanceReferenceType.StrongReference))
{
nestedFamilyWidthref.Append(e);
}
foreach (var e in nestedFamily1.GetReferences(FamilyInstanceReferenceType.Top))
{
nestedFamilyHeightref.Append(e);
}
foreach (var e in nestedFamily1.GetReferences(FamilyInstanceReferenceType.Bottom))
{
nestedFamilyHeightref.Append(e);
}
#endregion
#region//Create endpoints for line creation
XYZ genericModelHeight = GetDistance(locationpoint, widthDirection, MDK_breedte, 1000);
XYZ genericModelWidth = new XYZ(locationpoint.X, locationpoint.Y, locationpoint.Z + MDK_offset_vooraanzicht - converter.ConvertToFeet(1000));
XYZ nestedFamilyHeight = GetDistance(locationpoint, widthDirection, MDK_breedte, 500);
XYZ nestedFamilyWidth = new XYZ(locationpoint.X, locationpoint.Y, locationpoint.Z + MDK_offset_vooraanzicht - converter.ConvertToFeet(500));
#endregion
#region//Create line for dimension
Line genericModelHeightLine = Line.CreateBound(genericModelHeight, genericModelHeight + heigthDirection * 100);
Line genericModelWidthLine = Line.CreateBound(genericModelWidth, genericModelWidth + widthDirection * 100);
Line nestedFamilyHeightLine = Line.CreateBound(nestedFamilyHeight, nestedFamilyHeight + heigthDirection * 100);
Line nestedFamilyWidthLine = Line.CreateBound(nestedFamilyWidth, nestedFamilyWidth + widthDirection * 100);
#endregion
#region//Create Dimensions
using (Transaction tx = new Transaction(doc))
{
tx.Start("Create Dimensions");
#region//Create and set workplane to place dimensions on
Plane plane = Plane.CreateByNormalAndOrigin(sectionView.ViewDirection, sectionView.Origin);
SketchPlane sketchPlane = SketchPlane.Create(doc, plane);
sectionView.SketchPlane = sketchPlane;
#endregion
#region//Create Dimensions
doc.Create.NewDimension(sectionView, genericModelHeightLine, genericModelHeightref, genericModelDimension);
doc.Create.NewDimension(sectionView, genericModelWidthLine, genericModelWidthref, genericModelDimension);
doc.Create.NewDimension(sectionView, nestedFamilyHeightLine, nestedFamilyHeightref, nestedFamilyDimension);
doc.Create.NewDimension(sectionView, nestedFamilyWidthLine, nestedFamilyWidthref, nestedFamilyDimension);
#endregion
tx.Commit();
}
#endregion
}
#endregion
}
#endregion
return(Result.Succeeded);
}
private Result mepSection(Document doc, IList <MEPCurve> mep)
{
//check straight
IList <LocationCurve> lc = mep.Select(x => x.Location).Cast <LocationCurve>().ToList(); //duct.Location as LocationCurve;
IList <Curve> curve = lc.Select(x => x.Curve).Cast <Curve>().ToList(); //lc.Curve as Curve;
if (curve.Count == 0)
{
TaskDialog.Show("...", "Unable to retrieve wall location line.");
return(Result.Failed);
}
// Determine view family type to use
ViewFamilyType vft
= new FilteredElementCollector(doc)
.OfClass(typeof(ViewFamilyType))
.Cast <ViewFamilyType>()
.FirstOrDefault <ViewFamilyType>(x =>
ViewFamily.Section == x.ViewFamily);
// Determine section box
IList <XYZ> p = curve.Select(x => x.GetEndPoint(0)).ToList();
IList <XYZ> q = curve.Select(x => x.GetEndPoint(1)).ToList();
IList <XYZ> v = q.Zip(p, (x, y) => x - y).ToList();
IList <XYZ> v2 = v.Select(x => x.X).Zip(v.Select(y => y.Y), (x, y) => new XYZ(x, y, 0)).ToList(); //Z => 0
IList <XYZ> allPoints = p.Concat(q).ToList();
//double minAllX = allPoints.Select(x => x.X).Min();
//double minAllY = allPoints.Select(y => y.Y).Min();
//double minAllZ = allPoints.Select(z => z.Z).Min();
//double maxAllX = allPoints.Select(x => x.X).Max();
//double maxAllY = allPoints.Select(y => y.Y).Max();
//double maxAllZ = allPoints.Select(z => z.Z).Max();
IList <BoundingBoxXYZ> boundingBoxes = mep.Select(x => x.get_BoundingBox(doc.ActiveView)).ToList();
double minAllX = boundingBoxes.Select(x => x.Min).Select(x => x.X).Min();
double minAllY = boundingBoxes.Select(x => x.Min).Select(x => x.Y).Min();
double minAllZ = boundingBoxes.Select(x => x.Min).Select(x => x.Z).Min();
double maxAllX = boundingBoxes.Select(x => x.Max).Select(x => x.X).Max();
double maxAllY = boundingBoxes.Select(x => x.Max).Select(x => x.Y).Max();
double maxAllZ = boundingBoxes.Select(x => x.Max).Select(x => x.Z).Max();
XYZ minAll = new XYZ(minAllX, minAllY, minAllZ);
XYZ maxAll = new XYZ(maxAllX, maxAllY, maxAllZ);
minAll.Normalize();
maxAll.Normalize();
BoundingBoxXYZ boundingBoxAll = new BoundingBoxXYZ();
boundingBoxAll.Min = minAll;
boundingBoxAll.Max = maxAll;
//t.Origin = midpoint;
//t.BasisX = ductdir;
//t.BasisY = up;
//t.BasisZ = viewdir;
Transform transform = boundingBoxAll.Transform;
//boundingBoxAll.Transform = Transform.CreateRotation(XYZ.BasisX, 4.71);
//transform.BasisY = XYZ.BasisZ;
//Transform transformAll = boundingBoxAll.Transform;
try
{
using (Transaction t = new Transaction(doc, "View Section"))
{
t.Start();
viewSec = ViewSection.CreateSection(doc, vft.Id, boundingBoxAll);
t.Commit();
}
}
catch (Exception ex)
{
TaskDialog.Show("O", ex.Message);
}
return(Result.Succeeded);
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
using (Transaction transaction = new Transaction(commandData.Application.ActiveUIDocument.Document, "InsertSection"))
{
try
{
bool isValidSelect = false;
do
{
Reference selectedObject = commandData.Application.ActiveUIDocument.Selection.PickObject(Autodesk.Revit.UI.Selection.ObjectType.Element, "Select door!");
if (selectedObject != null)
{
Element element = commandData.Application.ActiveUIDocument.Document.GetElement(selectedObject.ElementId);
ElementType elementType = commandData.Application.ActiveUIDocument.Document.GetElement(element.GetTypeId()) as ElementType;
double height = elementType.get_Parameter(BuiltInParameter.DOOR_HEIGHT).AsDouble();
double width = elementType.get_Parameter(BuiltInParameter.DOOR_WIDTH).AsDouble();
FamilyInstance familyInstance = element as FamilyInstance;
if (height == 0)
{
height = familyInstance.get_Parameter(BuiltInParameter.DOOR_HEIGHT).AsDouble();
}
if (width == 0)
{
width = familyInstance.get_Parameter(BuiltInParameter.DOOR_WIDTH).AsDouble();
}
Transform doorTransform = familyInstance.get_Geometry(new Options()).Select(s => s as GeometryInstance).Select(y => y.Transform).FirstOrDefault();
if (element.Category.Name == "Doors")
{
Document doc = commandData.Application.ActiveUIDocument.Document;
View view = doc.ActiveView;
ViewFamilyType viewFamilyType = new FilteredElementCollector(commandData.Application.ActiveUIDocument.Document).OfClass(typeof(ViewFamilyType)).Cast <ViewFamilyType>().Where(t => t.ViewFamily == ViewFamily.Section).FirstOrDefault();
if (viewFamilyType == null)
{
return(Result.Failed);
}
Transform curveTransform = doorTransform;
curveTransform.BasisX = new XYZ(curveTransform.BasisX.Y, curveTransform.BasisX.X, curveTransform.BasisX.Z);
XYZ origin = curveTransform.Origin; // mid-point of location curve
XYZ viewDirection = curveTransform.BasisX.Normalize(); // tangent vector along the location curve
XYZ normal = viewDirection.CrossProduct(XYZ.BasisZ).Normalize(); // location curve normal @ mid-point
Transform transform = Transform.Identity;
transform.Origin = origin;
transform.BasisX = normal;
transform.BasisY = XYZ.BasisZ;
// can use this simplification because wall's "up" is vertical.
// For a non-vertical situation (such as section through a sloped floor the surface normal would be needed)
transform.BasisZ = normal.CrossProduct(XYZ.BasisZ);
BoundingBoxXYZ sectionBox = new BoundingBoxXYZ();
sectionBox.Transform = transform;
sectionBox.Min = new XYZ(-(width / 2), 0, 0);
sectionBox.Max = new XYZ(width / 2, height, 5);
transaction.Start();
ViewSection viewSection = ViewSection.CreateSection(doc, viewFamilyType.Id, sectionBox);
transaction.Commit();
isValidSelect = true;
}
else
{
TaskDialog.Show("Error", "It is not door!");
}
}
else
{
TaskDialog.Show("Error", "It is not object!");
}
} while (!isValidSelect);
}
catch (Exception e)
{
return(Result.Failed);
}
}
return(Result.Succeeded);
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
UIDocument uidoc = commandData.Application.ActiveUIDocument;
Document doc = uidoc.Document;
IEnumerable <ElementId> selElSet = uidoc.Selection.GetElementIds();
IList <double> XX = new List <double>(), YY = new List <double>(), ZZ = new List <double>();
XX.Clear(); YY.Clear(); ZZ.Clear();
if (selElSet.Count().Equals(0))
{
return(Result.Failed);
}
foreach (ElementId elll in selElSet)
{
double n = doc.GetElement(elll).get_BoundingBox(doc.ActiveView).Min.X;
XX.Add(n);
n = doc.GetElement(elll).get_BoundingBox(doc.ActiveView).Max.X;
XX.Add(n);
n = doc.GetElement(elll).get_BoundingBox(doc.ActiveView).Min.Y;
YY.Add(n);
n = doc.GetElement(elll).get_BoundingBox(doc.ActiveView).Max.Y;
YY.Add(n);
n = doc.GetElement(elll).get_BoundingBox(doc.ActiveView).Min.Z;
ZZ.Add(n);
n = doc.GetElement(elll).get_BoundingBox(doc.ActiveView).Max.Z;
ZZ.Add(n);
}
FilteredElementCollector lvlcol = new FilteredElementCollector(doc).
OfCategory(BuiltInCategory.OST_Levels).WhereElementIsNotElementType();
double minElevation = 0, maxElevation = 0;
foreach (Level lvl in lvlcol)
{
if (lvl.Elevation > maxElevation)
{
maxElevation = lvl.Elevation;
}
if (lvl.Elevation < minElevation)
{
minElevation = lvl.Elevation;
}
}
XYZ min = new XYZ(XX.Min(), YY.Min(), minElevation - 5);
XYZ max = new XYZ(XX.Max(), YY.Max(), maxElevation + 5);
if (max.Subtract(min).GetLength() < 5)
{
min.Add(min.Multiply(1.5));
max.Add(max.Multiply(1.5));
}
Transform t = Transform.Identity;
t.BasisX = XYZ.BasisX;
t.BasisY = XYZ.BasisY;
t.BasisZ = XYZ.BasisZ;
BoundingBoxXYZ sectionBox = new BoundingBoxXYZ();
sectionBox.Transform = t;
sectionBox.Min = min;
sectionBox.Max = max;
ViewFamilyType vft
= new FilteredElementCollector(doc)
.OfClass(typeof(ViewFamilyType))
.Cast <ViewFamilyType>()
.FirstOrDefault <ViewFamilyType>(x =>
ViewFamily.Section == x.ViewFamily);
using (Transaction tx = new Transaction(doc))
{
tx.Start("Create Section View");
View Myview = ViewSection.CreateSection(doc, vft.Id, sectionBox);
#region Test/////////////////3D
ViewFamilyType vft3d
= new FilteredElementCollector(doc)
.OfClass(typeof(ViewFamilyType))
.Cast <ViewFamilyType>()
.FirstOrDefault <ViewFamilyType>(x =>
ViewFamily.ThreeDimensional == x.ViewFamily);
View3D view3dEX = View3D.CreateIsometric(doc, vft3d.Id);
view3dEX.SetSectionBox(sectionBox);
#endregion
tx.Commit();
uidoc.ActiveView = view3dEX;
}
return(Result.Succeeded);
}
