コード例 #1
0
 public StandardAddInServer()
 {
     m_inventorApplication  = null;
     m_blockFormCmd         = null;
     m_alignCmd             = null;
     m_extractiFeatureCmd   = null;
     m_iFeatureFormCmd      = null;
     m_cavityLibraryEditCmd = null;
     m_cavityLibraryAddCmd  = null;
     m_cavityLibraryScanCmd = null;
     m_boltHolesFormCmd     = null;
     m_deleteCmd            = null;
     m_rotateCmd            = null;
     m_insertOutlineCmd     = null;
     m_insertXportCmd       = null;
     m_editNetCmd           = null;
 }
コード例 #2
0
        public void Activate(Inventor.ApplicationAddInSite addInSiteObject, bool firstTime)
        {
            try
            {
                // This method is called by Inventor when it loads the addin.
                // The AddInSiteObject provides access to the Inventor Application object.
                // The FirstTime flag indicates if the addin is loaded for the first time.

                #region Initialize AddIn members and event delegate
                // Initialize AddIn members.
                m_inventorApplication = addInSiteObject.Application;

                //Initialize event delegates
                m_userInterfaceEvents = m_inventorApplication.UserInterfaceManager.UserInterfaceEvents;

                UserInterfaceEventsSink_OnResetCommandBarsEventDelegate = new UserInterfaceEventsSink_OnResetCommandBarsEventHandler(UserInterfaceEvents_OnResetCommandBars);
                m_userInterfaceEvents.OnResetCommandBars += UserInterfaceEventsSink_OnResetCommandBarsEventDelegate;

                UserInterfaceEventsSink_OnEnvironmentChangeEventDelegate = new UserInterfaceEventsSink_OnEnvironmentChangeEventHandler(UserInterfaceEvents_OnEnvironmentChange);
                m_userInterfaceEvents.OnEnvironmentChange += UserInterfaceEventsSink_OnEnvironmentChangeEventDelegate;

                UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate = new UserInterfaceEventsSink_OnResetRibbonInterfaceEventHandler(UserInterfaceEventsSink_OnResetRibbonInterface);
                m_userInterfaceEvents.OnResetRibbonInterface += UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate;
                #endregion

                // TODO: Add ApplicationAddInServer.Activate implementation.
                // e.g. event initialization, command creation etc.

                String strAddInGUID = "{" + ((GuidAttribute)System.Attribute.GetCustomAttribute(typeof(StandardAddInServer), typeof(GuidAttribute))).Value + "}";
                m_strAddInGUID = strAddInGUID;

                #region 创建按钮.  create the buttons

                //get all the names of the current assembly
                this.IconPictureInitial();
                //-----------------------------------------------------------------------------------
                //create the instance of the "BlockGenerator" command and button
                m_blockFormCmd = new BlockFormCmd();
                this.CreateButton(
                    "ValveBlockDesign.resources.BlockStandard.ico",
                    "ValveBlockDesign.resources.BlockLarge.ico",
                    m_blockFormCmd,
                    "块",
                    "AppBlockGenerateCmd",
                    CommandTypesEnum.kShapeEditCmdType,
                    strAddInGUID,
                    "Generate a block",
                    "Generate a block with parameters entered by user",
                    ButtonDisplayEnum.kDisplayTextInLearningMode,
                    false);
                //-----------------------------------------------------------------------------------
                //create the instance of the "Align" command and button
                m_alignCmd = new AlignCmd();
                this.CreateButton(
                    "ValveBlockDesign.resources.AlignStandard.ico",
                    "ValveBlockDesign.resources.AlignLarge.ico",
                    m_alignCmd,
                    "对齐",
                    "AppAlignCmd",
                    CommandTypesEnum.kShapeEditCmdType,
                    strAddInGUID,
                    "Cavity align",
                    "Cavity align",
                    ButtonDisplayEnum.kDisplayTextInLearningMode,
                    false);
                //-----------------------------------------------------------------------------------
                //create the instance of the "ExtractiFeature" command and button
                m_extractiFeatureCmd = new ExtractiFeatureCmd();
                this.CreateButton(
                    "ValveBlockDesign.resources.ExtractiFeatureStandard.ico",
                    "ValveBlockDesign.resources.ExtractiFeatureLarge.ico",
                    m_extractiFeatureCmd,
                    "提取模型",
                    "AppExtractiFeatureCmd",
                    CommandTypesEnum.kShapeEditCmdType,
                    strAddInGUID,
                    "提取特征",
                    "提取特征",
                    ButtonDisplayEnum.kDisplayTextInLearningMode,
                    false);
                //-----------------------------------------------------------------------------------
                //create the instance of the "InsertiFeature" command and button
                m_iFeatureFormCmd = new iFeatureFormCmd();
                this.CreateButton(
                    "ValveBlockDesign.resources.InsertiFeatureStandard.ico",
                    "ValveBlockDesign.resources.InsertiFeatureLarge.ico",
                    m_iFeatureFormCmd,
                    "元件特征",
                    "AppInsertiFeatureCmd",
                    CommandTypesEnum.kShapeEditCmdType,
                    strAddInGUID,
                    "插入特征",
                    "插入特征",
                    ButtonDisplayEnum.kDisplayTextInLearningMode,
                    false);
                //-----------------------------------------------------------------------------------
                //create the instance of the "DeleteiFeature" command and button
                m_deleteCmd = new DeleteCmd();
                this.CreateButton(
                    "ValveBlockDesign.resources.DeleteCmdStandard.ico",
                    "ValveBlockDesign.resources.DeleteCmdLarge.ico",
                    m_deleteCmd,
                    "删除",
                    "AppDeleteiFeatureCmd",
                    CommandTypesEnum.kShapeEditCmdType,
                    strAddInGUID,
                    "删除特征",
                    "删除特征",
                    ButtonDisplayEnum.kDisplayTextInLearningMode,
                    false);
                //-----------------------------------------------------------------------------------
                //create the instance of the "RotateiFeature" command and button
                m_rotateCmd = new RotateCmd();
                this.CreateButton(
                    "ValveBlockDesign.resources.RotateCmdStandard.ico",
                    "ValveBlockDesign.resources.RotateCmdLarge.ico",
                    m_rotateCmd,
                    "旋转",
                    "AppRotateiFeatureCmd",
                    CommandTypesEnum.kShapeEditCmdType,
                    strAddInGUID,
                    "旋转特征",
                    "旋转特征",
                    ButtonDisplayEnum.kDisplayTextInLearningMode,
                    false);
                //-----------------------------------------------------------------------------------
                //create the instance of the "InsertOutline" command and button
                m_insertOutlineCmd = new InsertOutlineCmd();
                this.CreateButton(
                    "ValveBlockDesign.resources.InsertiFeatureStandard.ico",
                    "ValveBlockDesign.resources.OutLineCmdLarge.ico",
                    m_insertOutlineCmd,
                    "安装外形",
                    "AppInsertOutlineCmd",
                    CommandTypesEnum.kShapeEditCmdType,
                    strAddInGUID,
                    "插入安装外形",
                    "插入安装外形",
                    ButtonDisplayEnum.kDisplayTextInLearningMode,
                    false);
                //-----------------------------------------------------------------------------------
                //create the instance of the "Move" command and button
                m_moveCmd = new MoveCmd();
                this.CreateButton(
                    "ValveBlockDesign.resources.MoveCmdStandard.ico",
                    "ValveBlockDesign.resources.MoveCmdLarge.ico",
                    m_moveCmd,
                    "移动",
                    "AppMoveCmd",
                    CommandTypesEnum.kShapeEditCmdType,
                    strAddInGUID,
                    "移动孔",
                    "移动孔",
                    ButtonDisplayEnum.kDisplayTextInLearningMode,
                    false);
                //-----------------------------------------------------------------------------------
                //create the instance of the "Connect" command and button
                m_connectCmd = new ConnectCmd();
                this.CreateButton(
                    "ValveBlockDesign.resources.ConnectStandard.ico",
                    "ValveBlockDesign.resources.ConnectLarge.ico",
                    m_connectCmd,
                    "连接",
                    "AppConnectCmd",
                    CommandTypesEnum.kShapeEditCmdType,
                    strAddInGUID,
                    "连接孔",
                    "连接孔",
                    ButtonDisplayEnum.kDisplayTextInLearningMode,
                    false);
                //-----------------------------------------------------------------------------------
                //create the instance of the "Edit" command and button
                m_cavityLibraryEditCmd = new CavityLibraryEditCmd();
                this.CreateButton(
                    "ValveBlockDesign.resources.EditCavityCmdStandard.ico",
                    "ValveBlockDesign.resources.EditCavityCmdLarge.ico",
                    m_cavityLibraryEditCmd,
                    "修改元件",
                    "AppEditLibraryCmd",
                    CommandTypesEnum.kShapeEditCmdType,
                    strAddInGUID,
                    "修改元件参数",
                    "修改元件参数",
                    ButtonDisplayEnum.kDisplayTextInLearningMode,
                    false);
                //-----------------------------------------------------------------------------------
                //create the instance of the "Add" command and button
                m_cavityLibraryAddCmd = new CavityLibraryAddCmd();
                this.CreateButton(
                    "ValveBlockDesign.resources.AddCavityCmdStandard.ico",
                    "ValveBlockDesign.resources.AddCavityCmdLarge.ico",
                    m_cavityLibraryAddCmd,
                    "添加元件",
                    "AppAddLibraryCmd",
                    CommandTypesEnum.kShapeEditCmdType,
                    strAddInGUID,
                    "添加新元件",
                    "添加新元件",
                    ButtonDisplayEnum.kDisplayTextInLearningMode,
                    false);
                //-----------------------------------------------------------------------------------
                m_cavityLibraryScanCmd = new CavityLibraryScanCmd();
                this.CreateButton(
                    "ValveBlockDesign.resources.ScanCavityCmdStandard.ico",
                    "ValveBlockDesign.resources.ScanCavityCmdLarge.ico",
                    m_cavityLibraryScanCmd,
                    "浏览元件",
                    "AppScanLibraryCmd",
                    CommandTypesEnum.kShapeEditCmdType,
                    strAddInGUID,
                    "浏览库中元件",
                    "浏览库中元件",
                    ButtonDisplayEnum.kDisplayTextInLearningMode,
                    false);
                //-----------------------------------------------------------------------------------
                m_boltHolesFormCmd = new BoltHolesFormCmd();
                this.CreateButton(
                    "ValveBlockDesign.resources.BoltHolesCmdStandard.ico",
                    "ValveBlockDesign.resources.BoltHolesCmdLarge.ico",
                    m_boltHolesFormCmd,
                    "安装螺纹孔",
                    "AppInsertBoltHolesCmd",
                    CommandTypesEnum.kShapeEditCmdType,
                    strAddInGUID,
                    "插入安装螺纹孔",
                    "插入安装螺纹孔",
                    ButtonDisplayEnum.kDisplayTextInLearningMode,
                    false);
                //---------------------------------------------------------------------------------
                m_insertXportCmd = new InsertXportCmd();
                this.CreateButton(
                    "ValveBlockDesign.resources.BoltHolesCmdStandard.ico",
                    "ValveBlockDesign.resources.Xport.ico",
                    m_insertXportCmd,
                    "工艺孔",
                    "AppInsertXportCmd",
                    CommandTypesEnum.kShapeEditCmdType,
                    strAddInGUID,
                    "插入工艺孔",
                    "插入工艺孔",
                    ButtonDisplayEnum.kDisplayTextInLearningMode,
                    false);
                //---------------------------------------------------------------------------------
                m_editNetCmd = new EditNetCmd();
                this.CreateButton(
                    "ValveBlockDesign.resources.BoltHolesCmdStandard.ico",
                    "ValveBlockDesign.resources.EditColor.ico",
                    m_editNetCmd,
                    "修改网络",
                    "AppEditNetCmd",
                    CommandTypesEnum.kShapeEditCmdType,
                    strAddInGUID,
                    "修改油孔网络",
                    "修改油孔网络",
                    ButtonDisplayEnum.kDisplayTextInLearningMode,
                    false);
                //---------------------------------------------------------------------------------
                #endregion

                #region 设置ChangeManager和CommandCategory.  Set the ChangeManager and CommandCategory
                //Create change definitions
                //get the change manager
                ChangeManager oChangeManager = m_inventorApplication.ChangeManager;

                //Create the change definition collections
                ChangeDefinitions oChangeDefs = oChangeManager.Add(strAddInGUID);

                //-----------------------------------------------------------------------------------
                //Create the "Block" change definition
                ChangeDefinition oBlockChangeDef = oChangeDefs.Add("AppBlockGenerateChgDef", "块");

                //Create the command category
                CommandCategory oBlockCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("块", "AppBlockGenerateCmdCat", strAddInGUID);
                oBlockCmdCategory.Add(m_blockFormCmd.ButtonDefinition);
                //-----------------------------------------------------------------------------------
                ChangeDefinition oAlignChangeDef = oChangeDefs.Add("AppAlignChgDef", "对齐");

                CommandCategory oAlignCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("对齐", "AppAlignCmdCat", strAddInGUID);
                oAlignCmdCategory.Add(m_alignCmd.ButtonDefinition);
                //-----------------------------------------------------------------------------------
                ChangeDefinition oExtractiFeatureChangeDef = oChangeDefs.Add("AppExtractiFeatureChgDef", "提取特征");

                CommandCategory oExtractiFeatureCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("提取特征", "AppExtractiFeatureCmdCat", strAddInGUID);
                oExtractiFeatureCmdCategory.Add(m_extractiFeatureCmd.ButtonDefinition);
                //-----------------------------------------------------------------------------------
                ChangeDefinition oInsertiFeatureChangeDef = oChangeDefs.Add("AppInsertiFeatureChgDef", "插入特征");

                CommandCategory oInsertiFeatureCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("插入特征", "AppInsertiFeatureCmdCat", strAddInGUID);
                oInsertiFeatureCmdCategory.Add(m_iFeatureFormCmd.ButtonDefinition);
                //-----------------------------------------------------------------------------------
                ChangeDefinition oDeleteiFeatureChangeDef = oChangeDefs.Add("AppDeleteiFeatureChgDef", "删除特征");

                CommandCategory oDeleteiFeatureCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("删除特征", "AppDeleteiFeatureCmdCat", strAddInGUID);
                oDeleteiFeatureCmdCategory.Add(m_deleteCmd.ButtonDefinition);
                //-----------------------------------------------------------------------------------
                ChangeDefinition oRotateiFeatureChangeDef = oChangeDefs.Add("AppRotateiFeatureChgDef", "旋转特征");

                CommandCategory oRotateiFeatureCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("旋转特征", "AppRotateiFeatureCmdCat", strAddInGUID);
                oRotateiFeatureCmdCategory.Add(m_rotateCmd.ButtonDefinition);
                //-----------------------------------------------------------------------------------
                ChangeDefinition oMoveChangeDef = oChangeDefs.Add("AppMoveChgDef", "移动孔");

                CommandCategory oMoveCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("移动孔", "AppMoveCmdCat", strAddInGUID);
                oMoveCmdCategory.Add(m_moveCmd.ButtonDefinition);
                //-----------------------------------------------------------------------------------
                ChangeDefinition oInsertOutlineChangeDef = oChangeDefs.Add("AppInsertOutlineChgDef", "插入安装外形");

                CommandCategory oInsertOutlineCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("插入安装外形", "AppInsertOutlineCmdCat", strAddInGUID);
                oInsertOutlineCmdCategory.Add(m_insertOutlineCmd.ButtonDefinition);
                //-----------------------------------------------------------------------------------
                ChangeDefinition oInsertXportChangeDef = oChangeDefs.Add("AppInsertXportChgDef", "插入工艺孔");

                CommandCategory oInsertXportCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("插入工艺孔", "AppInsertXportCmdCat", strAddInGUID);
                oInsertXportCmdCategory.Add(m_insertXportCmd.ButtonDefinition);
                //-----------------------------------------------------------------------------------
                ChangeDefinition oEditNetChangeDef = oChangeDefs.Add("AppEditNetChgDef", "修改油孔网络");

                CommandCategory oEitNetCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("修改油孔网络", "AppEditNetCmdCat", strAddInGUID);
                oEitNetCmdCategory.Add(m_editNetCmd.ButtonDefinition);
                //-----------------------------------------------------------------------------------
                ChangeDefinition oConnectDef = oChangeDefs.Add("AppConnectChgDef", "连接");

                CommandCategory oConnectCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("连接", "AppConnectCmdCat", strAddInGUID);
                oConnectCmdCategory.Add(m_connectCmd.ButtonDefinition);
                //-----------------------------------------------------------------------------------
                ChangeDefinition oEditLibraryDef = oChangeDefs.Add("AppEditLibraryChgDef", "修改参数");

                CommandCategory oEditLibraryCategory = m_inventorApplication.CommandManager.CommandCategories.Add("修改参数", "AppEditLibraryCmdCat", strAddInGUID);
                oEditLibraryCategory.Add(m_cavityLibraryEditCmd.ButtonDefinition);
                //-----------------------------------------------------------------------------------
                ChangeDefinition oAddLibraryDef = oChangeDefs.Add("AppAddLibraryChgDef", "添加特征元件");

                CommandCategory oAddLibraryCategory = m_inventorApplication.CommandManager.CommandCategories.Add("添加特征元件", "AppAddLibraryCmdCat", strAddInGUID);
                oAddLibraryCategory.Add(m_cavityLibraryAddCmd.ButtonDefinition);
                //-----------------------------------------------------------------------------------
                ChangeDefinition oScanLibraryDef = oChangeDefs.Add("AppScanLibraryChgDef", "浏览特征元件");

                CommandCategory oScanLibraryCategory = m_inventorApplication.CommandManager.CommandCategories.Add("浏览特征元件", "AppScanLibraryCmdCat", strAddInGUID);
                oScanLibraryCategory.Add(m_cavityLibraryScanCmd.ButtonDefinition);
                //-----------------------------------------------------------------------------------
                ChangeDefinition oInsertBoltHolesDef = oChangeDefs.Add("AppInsertBoltHolesChgDef", "插入安装螺纹孔");

                CommandCategory oInsertBoltHolesCategory = m_inventorApplication.CommandManager.CommandCategories.Add("插入安装螺纹孔", "AppInsertBoltHolesCmdCat", strAddInGUID);
                oInsertBoltHolesCategory.Add(m_boltHolesFormCmd.ButtonDefinition);
                //-----------------------------------------------------------------------------------
                #endregion

                #region 加载Ribbon面板. Load the Ribbon Panel.
                if (firstTime)
                {
                    Ribbon partDocRibbon;
                    partDocRibbon = m_inventorApplication.UserInterfaceManager.Ribbons["Part"];

                    RibbonTab myRibbonTab;
                    myRibbonTab = partDocRibbon.RibbonTabs.Add(
                        "阀块设计",
                        "id_TabBlockDesign",
                        strAddInGUID,
                        "",
                        false);

                    RibbonPanels ribbonPanels;
                    ribbonPanels = myRibbonTab.RibbonPanels;

                    RibbonPanel cubePanel;
                    cubePanel = ribbonPanels.Add(
                        "块",
                        "id_Panel_Block",
                        strAddInGUID,
                        "",
                        false);

                    CommandControls blockPanelCtrls;
                    blockPanelCtrls = cubePanel.CommandControls;

                    CommandControl cubePanelCtrl;
                    cubePanelCtrl = blockPanelCtrls.AddButton(
                        m_blockFormCmd.ButtonDefinition,
                        true,
                        true,
                        "",
                        false);
                    //------------------------------------------------------------------
                    //----------------------------------------------
                    //对iFeature特征操作
                    RibbonPanel iFeaturePanel;
                    iFeaturePanel = ribbonPanels.Add(
                        "插入",
                        "id_Panel_iFeature",
                        strAddInGUID,
                        "",
                        false);

                    CommandControls iFeatureCtrls;
                    iFeatureCtrls = iFeaturePanel.CommandControls;

                    CommandControl InsertiFeatureCtrl;//插入元件
                    InsertiFeatureCtrl = iFeatureCtrls.AddButton(
                        m_iFeatureFormCmd.ButtonDefinition,
                        true,
                        true,
                        "",
                        false);

                    CommandControl InsertOutlineCtrl;//插入安装外形
                    InsertOutlineCtrl = iFeatureCtrls.AddButton(
                        m_insertOutlineCmd.ButtonDefinition,
                        true,
                        true,
                        "",
                        true);
                    CommandControl InsertBoltHolesCtrl;//安装螺纹孔
                    InsertBoltHolesCtrl = iFeatureCtrls.AddButton(
                        m_boltHolesFormCmd.ButtonDefinition,
                        true,
                        true,
                        "",
                        false);
                    //-------------------------------------------------------------------------------
                    //RibbonPanel connectPanel;
                    //connectPanel = ribbonPanels.Add(
                    //    "连接",
                    //    "id_Panel_Connect",
                    //    strAddInGUID,
                    //    "",
                    //    false);

                    //CommandControls connectCtrls;
                    //connectCtrls = connectPanel.CommandControls;

                    RibbonPanel modifyPanel;
                    modifyPanel = ribbonPanels.Add(
                        "修改",
                        "id_Panel_Edit",
                        strAddInGUID,
                        "",
                        false);

                    CommandControls modifyCtrls;
                    modifyCtrls = modifyPanel.CommandControls;

                    CommandControl AlignCtrl;
                    AlignCtrl = modifyCtrls.AddButton(
                        m_alignCmd.ButtonDefinition,
                        true,
                        true,
                        "",
                        false);

                    CommandControl MoveCtrl;
                    MoveCtrl = modifyCtrls.AddButton(
                        m_moveCmd.ButtonDefinition,
                        true,
                        true,
                        "",
                        false);
                    CommandControl DeleteCtrl;//删除元件特征
                    DeleteCtrl = modifyCtrls.AddButton(
                        m_deleteCmd.ButtonDefinition,
                        true,
                        true,
                        "",
                        false);
                    CommandControl EditPortCtrl;//修改网络
                    EditPortCtrl = modifyCtrls.AddButton(
                        m_editNetCmd.ButtonDefinition,
                        true,
                        true,
                        "",
                        true);
                    CommandControl RotateCtrl;//旋转元件特征
                    RotateCtrl = modifyCtrls.AddButton(
                        m_rotateCmd.ButtonDefinition,
                        true,
                        true,
                        "",
                        false);
                    //--------------------------------------------------------
                    RibbonPanel ConnectPanel;
                    ConnectPanel = ribbonPanels.Add(
                        "连通油路",
                        "id_Panel_Connection",
                        strAddInGUID,
                        "",
                        false);

                    CommandControls ConnectCtrls;
                    ConnectCtrls = ConnectPanel.CommandControls;

                    CommandControl ConnectCtrl;
                    ConnectCtrl = ConnectCtrls.AddButton(
                        m_connectCmd.ButtonDefinition,
                        true,
                        true,
                        "",
                        false);
                    CommandControl InsertXportCtrl;//插入工艺孔
                    InsertXportCtrl = ConnectCtrls.AddButton(
                        m_insertXportCmd.ButtonDefinition,
                        true,
                        true,
                        "",
                        true);


                    //------------------------------------------------------------
                    //元件库的操作面板
                    RibbonPanel CavityLibraryPanel;
                    CavityLibraryPanel = ribbonPanels.Add(
                        "元件库",
                        "id_Panel_CavityLibrary",
                        strAddInGUID,
                        "",
                        false);

                    CommandControls CavityLibraryCtrls;
                    CavityLibraryCtrls = CavityLibraryPanel.CommandControls;

                    CommandControl EditCavityCtrl;
                    EditCavityCtrl = CavityLibraryCtrls.AddButton(
                        m_cavityLibraryEditCmd.ButtonDefinition,
                        true,
                        true,
                        "",
                        false);
                    CommandControl AddCavityCtrl;
                    AddCavityCtrl = CavityLibraryCtrls.AddButton(
                        m_cavityLibraryAddCmd.ButtonDefinition,
                        true,
                        true,
                        "",
                        false);
                    CommandControl ScanCavityCtrl;
                    ScanCavityCtrl = CavityLibraryCtrls.AddButton(
                        m_cavityLibraryScanCmd.ButtonDefinition,
                        true,
                        true,
                        "",
                        false);
                    CommandControl ExtractiFeatureCtrl;
                    ExtractiFeatureCtrl = CavityLibraryCtrls.AddButton(
                        m_extractiFeatureCmd.ButtonDefinition,
                        true,
                        true,
                        "",
                        false);
                }
                #endregion
            }
            catch (Exception ex)
            {
                System.Windows.Forms.MessageBox.Show(ex.ToString());
            }
        }
コード例 #3
0
        public void Deactivate()
        {
            // This method is called by Inventor when the AddIn is unloaded.
            // The AddIn will be unloaded either manually by the user or
            // when the Inventor session is terminated

            // TODO: Add ApplicationAddInServer.Deactivate implementation
            m_userInterfaceEvents.OnResetCommandBars     -= UserInterfaceEventsSink_OnResetCommandBarsEventDelegate;
            m_userInterfaceEvents.OnEnvironmentChange    -= UserInterfaceEventsSink_OnEnvironmentChangeEventDelegate;
            m_userInterfaceEvents.OnResetRibbonInterface -= UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate;

            UserInterfaceEventsSink_OnResetCommandBarsEventDelegate     = null;
            UserInterfaceEventsSink_OnEnvironmentChangeEventDelegate    = null;
            UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate = null;
            m_userInterfaceEvents = null;

            //remove the command button(s)
            m_blockFormCmd.RemoveButton();
            m_alignCmd.RemoveButton();
            m_extractiFeatureCmd.RemoveButton();
            m_iFeatureFormCmd.RemoveButton();
            m_moveCmd.RemoveButton();
            m_connectCmd.RemoveButton();
            m_cavityLibraryEditCmd.RemoveButton();
            m_cavityLibraryScanCmd.RemoveButton();
            m_cavityLibraryAddCmd.RemoveButton();
            m_boltHolesFormCmd.RemoveButton();
            m_deleteCmd.RemoveButton();
            m_rotateCmd.RemoveButton();
            m_insertOutlineCmd.RemoveButton();
            m_insertXportCmd.RemoveButton();
            m_editNetCmd.RemoveButton();

            m_blockFormCmd         = null;
            m_alignCmd             = null;
            m_extractiFeatureCmd   = null;
            m_iFeatureFormCmd      = null;
            m_moveCmd              = null;
            m_connectCmd           = null;
            m_cavityLibraryEditCmd = null;
            m_cavityLibraryAddCmd  = null;
            m_cavityLibraryScanCmd = null;
            m_boltHolesFormCmd     = null;
            m_deleteCmd            = null;
            m_rotateCmd            = null;
            m_insertOutlineCmd     = null;
            m_insertXportCmd       = null;
            m_editNetCmd           = null;

            //-----------------------------------------------------------------------------------
            //delete change definitions
            ChangeManager oChangeManager = m_inventorApplication.ChangeManager;

            ChangeDefinitions oChangeDefinition = oChangeManager[m_strAddInGUID];
            //-----------------------------------------------------------------------------------
            ChangeDefinition oBlockFormChangeDefinition = oChangeDefinition["AppBlockGenerateChgDef"];

            oBlockFormChangeDefinition.Delete();
            //-----------------------------------------------------------------------------------
            ChangeDefinition oAlignChangeDefinition = oChangeDefinition["AppAlignChgDef"];

            oAlignChangeDefinition.Delete();
            //-----------------------------------------------------------------------------------
            ChangeDefinition oExtractChangeDefinition = oChangeDefinition["AppExtractiFeatureChgDef"];

            oExtractChangeDefinition.Delete();
            //-----------------------------------------------------------------------------------
            ChangeDefinition oInsertChangeDefinition = oChangeDefinition["AppInsertiFeatureChgDef"];

            oInsertChangeDefinition.Delete();
            //-----------------------------------------------------------------------------------
            ChangeDefinition oDeleteChangeDefinition = oChangeDefinition["AppDeleteiFeatureChgDef"];

            oDeleteChangeDefinition.Delete();
            //-----------------------------------------------------------------------------------
            ChangeDefinition oRotateChangeDefinition = oChangeDefinition["AppRotateiFeatureChgDef"];

            oRotateChangeDefinition.Delete();
            //-----------------------------------------------------------------------------------
            ChangeDefinition oInsertOutlineChangeDefinition = oChangeDefinition["AppInsertOutlineChgDef"];

            oInsertOutlineChangeDefinition.Delete();
            //-----------------------------------------------------------------------------------
            ChangeDefinition oMoveDefinition = oChangeDefinition["AppMoveChgDef"];

            oMoveDefinition.Delete();
            //-----------------------------------------------------------------------------------
            ChangeDefinition oInsertXportDefinition = oChangeDefinition["AppInsertXportChgDef"];

            oInsertXportDefinition.Delete();
            //-----------------------------------------------------------------------------------
            ChangeDefinition oEditNetDefinition = oChangeDefinition["AppEditNetChgDef"];

            oEditNetDefinition.Delete();
            //-----------------------------------------------------------------------------------
            ChangeDefinition oConnectDefinition = oChangeDefinition["AppConnectChgDef"];

            oConnectDefinition.Delete();
            //-----------------------------------------------------------------------------------
            ChangeDefinition oEditLibraryDefinition = oChangeDefinition["AppEditLibraryChgDef"];

            oEditLibraryDefinition.Delete();
            //-----------------------------------------------------------------------------------
            ChangeDefinition oAddLibraryDefinition = oChangeDefinition["AppAddLibraryChgDef"];

            oAddLibraryDefinition.Delete();
            //-----------------------------------------------------------------------------------
            ChangeDefinition oScanLibraryDefinition = oChangeDefinition["AppScanLibraryChgDef"];

            oScanLibraryDefinition.Delete();
            //-----------------------------------------------------------------------------------
            ChangeDefinition oInsertBoltHolesDefinition = oChangeDefinition["AppInsertBoltHolesChgDef"];

            oInsertBoltHolesDefinition.Delete();
            //-----------------------------------------------------------------------------------
            // Release objects.
            //释放对象
            Marshal.ReleaseComObject(m_inventorApplication);
            m_inventorApplication = null;

            GC.Collect();
            GC.WaitForPendingFinalizers();
        }