void VIEW_ExitLineSaddle_Load(object sender, EventArgs e)
{
//绑定鞍座控件
dicSaddleControls["鞍座号"] = coilUnitSaddle1;
//实例化机组鞍座处理类
saddleMethod = new UnitSaddleMethod(constData.UnitNo, constData.ExitSaddleDefine, constData.tagServiceName);
saddleMethod.ReadDefintion();
lineSaddleTag.InitTagDataProvider(constData.tagServiceName);
//把表中的tag名称赋值到控件中
foreach (Control control in panelAutoScroll.Controls)
{
//添加解锁鞍座控件
if (control is CoilUnitSaddleButton)
{
CoilUnitSaddleButton t = (CoilUnitSaddleButton)control;
if (saddleMethod.DicSaddles.ContainsKey(t.MySaddleNo))
{
UnitSaddleBase theSaddleInfo = saddleMethod.DicSaddles[t.MySaddleNo];
if (!string.IsNullOrEmpty(theSaddleInfo.TagAdd_LockRequest) && theSaddleInfo.TagAdd_LockRequest != "")
{
//t.MySaddleTagName = theSaddleInfo.TagAdd_LockRequest;
lineSaddleTag.AddTagName(theSaddleInfo.TagAdd_LockRequest);
}
}
}
//添加机组状态控件
if (control is CoilUnitStatus)
{
CoilUnitStatus t = (CoilUnitStatus)control;
if (!string.IsNullOrEmpty(t.MyStatusTagName) && t.MyStatusTagName != "")
{
lineSaddleTag.AddTagName(t.MyStatusTagName);
}
}
}
lineSaddleTag.SetReady();
//把实例化后的机组tag处理类装备每个控件
foreach (Control control in panelAutoScroll.Controls)
{
if (control is CoilUnitSaddleButton)
{
CoilUnitSaddleButton t = (CoilUnitSaddleButton)control;
t.InitUnitSaddle(lineSaddleTag);
}
}
exitSaddleInfo.getExitSaddleDt(dgvExitSaddleInfo, constData.UnitNo);
//是否开启定时器
timer_LineSaddleControl.Enabled = true;
//设定刷新时间
timer_LineSaddleControl.Interval = 5000;
}
void VIEW_H145ExitLineSaddle_Load(object sender, EventArgs e)
{
auth = FrameContext.Instance.GetPlugin <IAuthorization>() as IAuthorization;
//绑定鞍座控件
dicSaddleControls["QWE12"] = coilUnitSaddle_QWE12;
dicSaddleControls["QWE15"] = coilUnitSaddle_QWE15;
dicSaddleControls["QWE16"] = coilUnitSaddle_QWE16;
dicSaddleControls["QWE17"] = coilUnitSaddle_QWE17;
dicSaddleControls["QWE22"] = coilUnitSaddle_QWE22;
dicSaddleControls["QWE23"] = coilUnitSaddle_QWE23;
dicSaddleControls["QWE24"] = coilUnitSaddle_QWE24;
//coilUnitSaddleButton_QWE12.MySaddleNo = "QWE12";
coilUnitSaddleButton_QWE15.MySaddleNo = "QWE15";
//coilUnitSaddleButton_QWE16.MySaddleNo = "QWE16";
//coilUnitSaddleButton_QWE17.MySaddleNo = "QWE17";
//coilUnitSaddleButton_QWE22.MySaddleNo = "QWE22";
//coilUnitSaddleButton_QWE23.MySaddleNo = "QWE23";
coilUnitSaddleButton_QWE24.MySaddleNo = "QWE24";
//实例化机组鞍座处理类
saddleMethod = new UnitSaddleMethod(H145Unit, constData.ExitSaddleDefine, constData.tagServiceName);
saddleMethod.ReadDefintion();
lineSaddleTag.InitTagDataProvider(constData.tagServiceName);
//把表中的tag名称赋值到控件中
foreach (Control control in groupBox2.Controls)
{
//添加解锁鞍座控件
if (control is CoilUnitSaddleButton)
{
CoilUnitSaddleButton t = (CoilUnitSaddleButton)control;
if (saddleMethod.DicSaddles.ContainsKey(t.MySaddleNo))
{
UnitSaddleBase theSaddleInfo = saddleMethod.DicSaddles[t.MySaddleNo];
if (!string.IsNullOrEmpty(theSaddleInfo.TagAdd_LockRequest) && theSaddleInfo.TagAdd_LockRequest != "")
{
t.MySaddleTagName_Feedback = theSaddleInfo.TagAdd_LockRequest_FEEDBACK;
t.MySaddleTagName_Set = theSaddleInfo.TagAdd_LockRequest_SET;
lineSaddleTag.AddTagName(theSaddleInfo.TagAdd_LockRequest_SET);
lineSaddleTag.AddTagName(theSaddleInfo.TagAdd_LockRequest_FEEDBACK);
}
}
}
//添加机组状态控件
//if (control is CoilUnitStatus)
//{
// CoilUnitStatus t = (CoilUnitStatus)control;
// if (!string.IsNullOrEmpty(t.MyStatusTagName) && t.MyStatusTagName != "")
// {
// lineSaddleTag.AddTagName(t.MyStatusTagName);
// }
//}
}
foreach (Control control in groupBox3.Controls)
{
//添加解锁鞍座控件
if (control is CoilUnitSaddleButton)
{
CoilUnitSaddleButton t = (CoilUnitSaddleButton)control;
if (saddleMethod.DicSaddles.ContainsKey(t.MySaddleNo))
{
UnitSaddleBase theSaddleInfo = saddleMethod.DicSaddles[t.MySaddleNo];
if (!string.IsNullOrEmpty(theSaddleInfo.TagAdd_LockRequest) && theSaddleInfo.TagAdd_LockRequest != "")
{
t.MySaddleTagName_Feedback = theSaddleInfo.TagAdd_LockRequest_FEEDBACK;
t.MySaddleTagName_Set = theSaddleInfo.TagAdd_LockRequest_SET;
lineSaddleTag.AddTagName(theSaddleInfo.TagAdd_LockRequest_SET);
lineSaddleTag.AddTagName(theSaddleInfo.TagAdd_LockRequest_FEEDBACK);
}
}
}
}
lineSaddleTag.SetReady();
//把实例化后的机组tag处理类装备每个控件
foreach (Control control in groupBox2.Controls)
{
if (control is CoilUnitSaddleButton)
{
CoilUnitSaddleButton t = (CoilUnitSaddleButton)control;
t.InitUnitSaddle(lineSaddleTag);
}
}
foreach (Control control in groupBox3.Controls)
{
if (control is CoilUnitSaddleButton)
{
CoilUnitSaddleButton t = (CoilUnitSaddleButton)control;
t.InitUnitSaddle(lineSaddleTag);
}
}
exitSaddleInfo.getExitSaddleDt(dgvExitSaddleInfo, H145Unit);
//是否开启定时器
timer_LineSaddleControl.Enabled = true;
//设定刷新时间
timer_LineSaddleControl.Interval = 5000;
}
void VIEW_ChainLineSaddle_Load(object sender, EventArgs e)
{
auth = FrameContext.Instance.GetPlugin <IAuthorization>() as IAuthorization;
//绑定鞍座控件
dicSaddleControls["PCQ17Z0"] = coilUnitSaddle_PCQ17Z0;
dicSaddleControls["PCQ16Z0"] = coilUnitSaddle_PCQ16Z0;
dicSaddleControls["PCQ15Z0"] = coilUnitSaddle_PCQ15Z0;
dicSaddleControls["PCQ14Z0"] = coilUnitSaddle_PCQ14Z0;
dicSaddleControls["PCQ13Z0"] = coilUnitSaddle_PCQ13Z0;
dicSaddleControls["PCQ12Z0"] = coilUnitSaddle_PCQ12Z0;
dicSaddleControls["PCQ10Z0"] = coilUnitSaddle_PCQ10Z0;
dicSaddleControls["PCQ09Z0"] = coilUnitSaddle_PCQ09Z0;
dicSaddleControls["PCQ08Z0"] = coilUnitSaddle_PCQ08Z0;
dicSaddleControls["PCQ07Z0"] = coilUnitSaddle_PCQ07Z0;
dicSaddleControls["PCQ06Z0"] = coilUnitSaddle_PCQ06Z0;
dicSaddleControls["PCQ05Z0"] = coilUnitSaddle_PCQ05Z0;
dicSaddleControls["PCQ04Z0"] = coilUnitSaddle_PCQ04Z0;
dicSaddleControls["PCQ03Z0"] = coilUnitSaddle_PCQ03Z0;
coilUnitSaddleButton_PCQ17Z0.MySaddleNo = "PCQ17Z0";
coilUnitSaddleButton_PCQ16Z0.MySaddleNo = "PCQ16Z0";
coilUnitSaddleButton_PCQ15Z0.MySaddleNo = "PCQ15Z0";
coilUnitSaddleButton_PCQ14Z0.MySaddleNo = "PCQ14Z0";
coilUnitSaddleButton_PCQ13Z0.MySaddleNo = "PCQ13Z0";
coilUnitSaddleButton_PCQ12Z0.MySaddleNo = "PCQ12Z0";
coilUnitSaddleButton_PCQ10Z0.MySaddleNo = "PCQ10Z0";
coilUnitSaddleButton_PCQ09Z0.MySaddleNo = "PCQ09Z0";
coilUnitSaddleButton_PCQ08Z0.MySaddleNo = "PCQ08Z0";
coilUnitSaddleButton_PCQ07Z0.MySaddleNo = "PCQ07Z0";
coilUnitSaddleButton_PCQ06Z0.MySaddleNo = "PCQ06Z0";
coilUnitSaddleButton_PCQ05Z0.MySaddleNo = "PCQ05Z0";
coilUnitSaddleButton_PCQ04Z0.MySaddleNo = "PCQ04Z0";
coilUnitSaddleButton_PCQ03Z0.MySaddleNo = "PCQ03Z0";
//实例化机组鞍座处理类
exitSaddleMethod = new UnitSaddleMethod(Chain, constData.ExitSaddleDefine, constData.tagServiceName);
exitSaddleMethod.ReadDefintion();
entrySaddleMethod = new UnitSaddleMethod(Chain, constData.EntrySaddleDefine, constData.tagServiceName);
entrySaddleMethod.ReadDefintion();
lineSaddleTag.InitTagDataProvider(constData.tagServiceName);
//把表中的tag名称赋值到控件中
foreach (Control control in panelAutoScroll.Controls)
{
//添加解锁鞍座控件
if (control is CoilUnitSaddleButton)
{
CoilUnitSaddleButton t = (CoilUnitSaddleButton)control;
if (exitSaddleMethod.DicSaddles.ContainsKey(t.MySaddleNo))
{
UnitSaddleBase theSaddleInfo = exitSaddleMethod.DicSaddles[t.MySaddleNo];
if (!string.IsNullOrEmpty(theSaddleInfo.TagAdd_LockRequest) && theSaddleInfo.TagAdd_LockRequest != "")
{
t.MySaddleTagName_Feedback = theSaddleInfo.TagAdd_LockRequest_FEEDBACK;
t.MySaddleTagName_Set = theSaddleInfo.TagAdd_LockRequest_SET;
lineSaddleTag.AddTagName(theSaddleInfo.TagAdd_LockRequest_SET);
lineSaddleTag.AddTagName(theSaddleInfo.TagAdd_LockRequest_FEEDBACK);
}
}
else if (entrySaddleMethod.DicSaddles.ContainsKey(t.MySaddleNo))
{
UnitSaddleBase theSaddleInfo = entrySaddleMethod.DicSaddles[t.MySaddleNo];
if (!string.IsNullOrEmpty(theSaddleInfo.TagAdd_LockRequest) && theSaddleInfo.TagAdd_LockRequest != "")
{
t.MySaddleTagName_Feedback = theSaddleInfo.TagAdd_LockRequest_FEEDBACK;
t.MySaddleTagName_Set = theSaddleInfo.TagAdd_LockRequest_SET;
lineSaddleTag.AddTagName(theSaddleInfo.TagAdd_LockRequest_SET);
lineSaddleTag.AddTagName(theSaddleInfo.TagAdd_LockRequest_FEEDBACK);
}
}
}
//添加机组状态控件
if (control is CoilUnitStatus)
{
CoilUnitStatus t = (CoilUnitStatus)control;
if (!string.IsNullOrEmpty(t.MyStatusTagName) && t.MyStatusTagName != "")
{
lineSaddleTag.AddTagName(t.MyStatusTagName);
}
}
}
lineSaddleTag.SetReady();
//把实例化后的机组tag处理类装备每个控件
foreach (Control control in panelAutoScroll.Controls)
{
if (control is CoilUnitSaddleButton)
{
CoilUnitSaddleButton t = (CoilUnitSaddleButton)control;
t.InitUnitSaddle(lineSaddleTag);
}
}
exitSaddleInfo.getExitSaddleDt(dgvExitSaddleInfo, Chain);
entrySaddleInfo.getEntrySaddleDt(dgvEntrySaddleInfo, Chain);
//是否开启定时器
timer_LineSaddleControl.Enabled = true;
//设定刷新时间
timer_LineSaddleControl.Interval = 5000;
}
