/// <summary>
/// Combine coplanar triangles from the faceted body if they share the edge. From this process, polygonal faces (with or without holes) will be created
/// </summary>
public void SimplifyAndMergeFaces()
{
int noTriangle = _geom.TriangleCount;
int noVertices = _geom.VertexCount;
IEqualityComparer <XYZ> normalComparer = new vectorCompare();
Dictionary <XYZ, List <int> > faceSortedByNormal = new Dictionary <XYZ, List <int> >(normalComparer);
for (int ef = 0; ef < noTriangle; ++ef)
{
TriangleInShellComponent f = _geom.GetTriangle(ef);
IList <int> vertIndex = new List <int>();
vertIndex.Add(f.VertexIndex0);
vertIndex.Add(f.VertexIndex1);
vertIndex.Add(f.VertexIndex2);
IndexFace intF = new IndexFace(vertIndex);
facesColl.Add(ef, intF); // Keep faces in a dictionary and assigns ID
List <int> fIDList;
if (!faceSortedByNormal.TryGetValue(intF.normal, out fIDList))
{
fIDList = new List <int>();
fIDList.Add(ef);
faceSortedByNormal.Add(intF.normal, fIDList);
}
else
{
if (!fIDList.Contains(ef))
{
fIDList.Add(ef);
}
}
}
foreach (KeyValuePair <XYZ, List <int> > fListDict in faceSortedByNormal)
{
List <int> mergedFaceList = null;
if (fListDict.Value.Count > 1)
{
TryMergeFaces(fListDict.Value, out mergedFaceList);
if (mergedFaceList != null && mergedFaceList.Count > 0)
{
// insert only new face indexes as the mergedlist from different vertices can be duplicated
foreach (int fIdx in mergedFaceList)
{
if (!_mergedFaceList.Contains(fIdx))
{
_mergedFaceList.Add(fIdx);
}
}
}
}
else if (!_mergedFaceList.Contains(fListDict.Value[0]))
{
_mergedFaceList.Add(fListDict.Value[0]); // No pair face, add it into the mergedList
}
}
}
/// <summary>
/// Function called before and after triangle merging.
/// Before merging it calculates the Euler characteristic of the original mesh.
/// After merging it calculates the Euler characteristic of the merged mesh.
/// </summary>
private int CalculateEulerCharacteristic()
{
int noVertices = 0;
int noHoles = 0; // Stays zero if mesh is triangular
int noFaces;
HashSet <IndexSegment> edges = new HashSet <IndexSegment>(new SegmentComparer(true /*compareBothDirections*/));
if (m_MergedFaceSet.Count != 0)
{
// Merging already occurred, calculate new Euler characteristic
noFaces = m_MergedFaceSet.Count;
foreach (int mergedFace in m_MergedFaceSet)
{
m_FacesCollDict[mergedFace].OuterAndInnerBoundaries.ToList().ForEach(vp => edges.Add(vp.Value));
if (m_FacesCollDict[mergedFace].IndexedInnerBoundaries != null)
{
noHoles += m_FacesCollDict[mergedFace].IndexedInnerBoundaries.Count;
}
}
noVertices = m_MeshVertices.Count; // m_MeshVertices doesn't contain isolated vertices
}
else
{
if (IsMesh)
{
noVertices = m_MeshGeom.Vertices.Count;
noFaces = m_MeshGeom.NumTriangles;
for (int faceIdx = 0; faceIdx < noFaces; faceIdx++)
{
MeshTriangle tri = m_MeshGeom.get_Triangle(faceIdx);
edges.Add(new IndexSegment((int)tri.get_Index(0), (int)tri.get_Index(1)));
edges.Add(new IndexSegment((int)tri.get_Index(1), (int)tri.get_Index(2)));
edges.Add(new IndexSegment((int)tri.get_Index(2), (int)tri.get_Index(0)));
}
}
else
{
noVertices = m_Geom.VertexCount;
noFaces = m_Geom.TriangleCount;
for (int faceIdx = 0; faceIdx < noFaces; faceIdx++)
{
TriangleInShellComponent tri = m_Geom.GetTriangle(faceIdx);
edges.Add(new IndexSegment(tri.VertexIndex0, tri.VertexIndex1));
edges.Add(new IndexSegment(tri.VertexIndex1, tri.VertexIndex2));
edges.Add(new IndexSegment(tri.VertexIndex2, tri.VertexIndex0));
}
}
}
// V - E + F - I
return(noVertices - edges.Count + noFaces - noHoles);
}
/// <summary>
/// Function called before and after triangle merging.
/// Before merging it calculates the Euler characteristic of the original mesh.
/// After merging it calculates the Euler characteristic of the merged mesh.
/// </summary>
private int CalculateEulerCharacteristic()
{
int noVertices = (IsMesh) ? _meshGeom.Vertices.Count : _geom.VertexCount;
int noHoles = 0; // Stays zero if mesh is triangular
int noFaces;
HashSet <IndexSegment> edges = new HashSet <IndexSegment>(new SegmentComparer(true /*compareBothDirections*/));
if (_mergedFaceList.Count != 0)
{
// Merging already occurred, calculate new Euler characteristic
noFaces = _mergedFaceList.Count;
foreach (int mergedFace in _mergedFaceList)
{
edges.UnionWith(facesColl[mergedFace].outerAndInnerBoundaries);
if (facesColl[mergedFace].indexedInnerBoundaries != null)
{
noHoles += facesColl[mergedFace].indexedInnerBoundaries.Count;
}
}
}
else
{
if (IsMesh)
{
noFaces = _meshGeom.NumTriangles;
for (int faceIdx = 0; faceIdx < noFaces; faceIdx++)
{
MeshTriangle tri = _meshGeom.get_Triangle(faceIdx);
edges.Add(new IndexSegment((int)tri.get_Index(0), (int)tri.get_Index(1)));
edges.Add(new IndexSegment((int)tri.get_Index(1), (int)tri.get_Index(2)));
edges.Add(new IndexSegment((int)tri.get_Index(2), (int)tri.get_Index(0)));
}
}
else
{
noFaces = _geom.TriangleCount;
for (int faceIdx = 0; faceIdx < noFaces; faceIdx++)
{
TriangleInShellComponent tri = _geom.GetTriangle(faceIdx);
edges.Add(new IndexSegment(tri.VertexIndex0, tri.VertexIndex1));
edges.Add(new IndexSegment(tri.VertexIndex1, tri.VertexIndex2));
edges.Add(new IndexSegment(tri.VertexIndex2, tri.VertexIndex0));
}
}
}
// V - E + F - I
return(noVertices - edges.Count + noFaces - noHoles);
}
private void ExportSolid(Solid solid)
{
SolidOrShellTessellationControls solidOrShellTessellationControls = new SolidOrShellTessellationControls
{
LevelOfDetail = userSetting.LevelOfDetail / 30.0,
Accuracy = 0.1,
MinAngleInTriangle = 0.0001,
MinExternalAngleBetweenTriangles = 1.0
};
try
{
TriangulatedSolidOrShell triangulatedSolidOrShell = SolidUtils.TessellateSolidOrShell(solid, solidOrShellTessellationControls);
int shellComponentCount = triangulatedSolidOrShell.ShellComponentCount;
for (int i = 0; i < shellComponentCount; i++)
{
TriangulatedShellComponent shellComponent = triangulatedSolidOrShell.GetShellComponent(i);
ModelGeometry exportedGeometry = new ModelGeometry
{
Transform = transformationStack.Peek(),
Points = new List <XYZ>(shellComponent.VertexCount)
};
for (int num = 0; num != shellComponent.VertexCount; num++)
{
exportedGeometry.Points.Add(shellComponent.GetVertex(num));
}
exportedGeometry.Indices = new List <int>(shellComponent.TriangleCount * 3);
for (int j = 0; j < shellComponent.TriangleCount; j++)
{
TriangleInShellComponent triangle = shellComponent.GetTriangle(j);
exportedGeometry.Indices.Add(triangle.VertexIndex0);
exportedGeometry.Indices.Add(triangle.VertexIndex1);
exportedGeometry.Indices.Add(triangle.VertexIndex2);
}
exportedGeometry.CalculateNormals(false);
exportedGeometry.CalculateUVs(true, false);
ElementId materialElementId = solid.Faces.get_Item(0).MaterialElementId;
Tuple <Document, ElementId> tuple = new Tuple <Document, ElementId>(documentStack.Peek(), materialElementId);
ChangeCurrentMaterial(tuple);
documentAndMaterialIdToGeometries[tuple].Add(exportedGeometry);
}
}
catch (Exception)
{
}
}
/// <summary>
/// Create a new list of geometry objects from the
/// given input. As input, we supply the result of
/// Room.GetClosedShell. The output is the exact
/// same solid lacking whatever flaws are present
/// in the input solid.
/// </summary>
static IList <GeometryObject> CopyGeometry(
GeometryElement geo,
ElementId materialId,
List <IntPoint3d> coords,
List <TriangleIndices> indices)
{
TessellatedShapeBuilderResult result = null;
TessellatedShapeBuilder builder
= new TessellatedShapeBuilder();
// Need to include the key in the value, otherwise
// no way to access it later, cf.
// https://stackoverflow.com/questions/1619090/getting-a-keyvaluepair-directly-from-a-dictionary
Dictionary <XYZ, KeyValuePair <XYZ, int> > pts
= new Dictionary <XYZ, KeyValuePair <XYZ, int> >(
new XyzEqualityComparer());
int nSolids = 0;
//int nFaces = 0;
int nTriangles = 0;
//int nVertices = 0;
List <XYZ> vertices = new List <XYZ>(3);
foreach (GeometryObject obj in geo)
{
Solid solid = obj as Solid;
if (null != solid)
{
if (0 < solid.Volume)
{
++nSolids;
builder.OpenConnectedFaceSet(false);
#region Create a new solid based on tessellation of the invalid room closed shell solid
#if CREATE_NEW_SOLID_USING_TESSELATION
Debug.Assert(
SolidUtils.IsValidForTessellation(solid),
"expected a valid solid for room closed shell");
SolidOrShellTessellationControls controls
= new SolidOrShellTessellationControls()
{
//
// Summary:
// A positive real number specifying how accurately a triangulation should approximate
// a solid or shell.
//
// Exceptions:
// T:Autodesk.Revit.Exceptions.ArgumentOutOfRangeException:
// When setting this property: The given value for accuracy must be greater than
// 0 and no more than 30000 feet.
// This statement is not true. I set Accuracy = 0.003 and an exception was thrown.
// Setting it to 0.006 was acceptable. 0.03 is a bit over 9 mm.
//
// Remarks:
// The maximum distance from a point on the triangulation to the nearest point on
// the solid or shell should be no greater than the specified accuracy. This constraint
// may be approximately enforced.
Accuracy = 0.03,
//
// Summary:
// An number between 0 and 1 (inclusive) specifying the level of detail for the
// triangulation of a solid or shell.
//
// Exceptions:
// T:Autodesk.Revit.Exceptions.ArgumentOutOfRangeException:
// When setting this property: The given value for levelOfDetail must lie between
// 0 and 1 (inclusive).
//
// Remarks:
// Smaller values yield coarser triangulations (fewer triangles), while larger values
// yield finer triangulations (more triangles).
LevelOfDetail = 0.1,
//
// Summary:
// A non-negative real number specifying the minimum allowed angle for any triangle
// in the triangulation, in radians.
//
// Exceptions:
// T:Autodesk.Revit.Exceptions.ArgumentOutOfRangeException:
// When setting this property: The given value for minAngleInTriangle must be at
// least 0 and less than 60 degrees, expressed in radians. The value 0 means to
// ignore the minimum angle constraint.
//
// Remarks:
// A small value can be useful when triangulating long, thin objects, in order to
// keep the number of triangles small, but it can result in long, thin triangles,
// which are not acceptable for all applications. If the value is too large, this
// constraint may not be satisfiable, causing the triangulation to fail. This constraint
// may be approximately enforced. A value of 0 means to ignore the minimum angle
// constraint.
MinAngleInTriangle = 3 * Math.PI / 180.0,
//
// Summary:
// A positive real number specifying the minimum allowed value for the external
// angle between two adjacent triangles, in radians.
//
// Exceptions:
// T:Autodesk.Revit.Exceptions.ArgumentOutOfRangeException:
// When setting this property: The given value for minExternalAngleBetweenTriangles
// must be greater than 0 and no more than 30000 feet.
//
// Remarks:
// A small value yields more smoothly curved triangulated surfaces, usually at the
// expense of an increase in the number of triangles. Note that this setting has
// no effect for planar surfaces. This constraint may be approximately enforced.
MinExternalAngleBetweenTriangles = 0.2 * Math.PI
};
TriangulatedSolidOrShell shell
= SolidUtils.TessellateSolidOrShell(solid, controls);
int n = shell.ShellComponentCount;
Debug.Assert(1 == n,
"expected just one shell component in room closed shell");
TriangulatedShellComponent component
= shell.GetShellComponent(0);
int coordsBase = coords.Count;
int indicesBase = indices.Count;
n = component.VertexCount;
for (int i = 0; i < n; ++i)
{
XYZ v = component.GetVertex(i);
coords.Add(new IntPoint3d(v));
}
n = component.TriangleCount;
for (int i = 0; i < n; ++i)
{
TriangleInShellComponent t
= component.GetTriangle(i);
vertices.Clear();
vertices.Add(component.GetVertex(t.VertexIndex0));
vertices.Add(component.GetVertex(t.VertexIndex1));
vertices.Add(component.GetVertex(t.VertexIndex2));
indices.Add(new TriangleIndices(
coordsBase + t.VertexIndex0,
coordsBase + t.VertexIndex1,
coordsBase + t.VertexIndex2));
TessellatedFace tf = new TessellatedFace(
vertices, materialId);
if (builder.DoesFaceHaveEnoughLoopsAndVertices(tf))
{
builder.AddFace(tf);
++nTriangles;
}
}
#else
// Iterate over the individual solid faces
foreach (Face f in solid.Faces)
{
vertices.Clear();
#region Use face triangulation
#if USE_FACE_TRIANGULATION
Mesh mesh = f.Triangulate();
int n = mesh.NumTriangles;
for (int i = 0; i < n; ++i)
{
MeshTriangle triangle = mesh.get_Triangle(i);
XYZ p1 = triangle.get_Vertex(0);
XYZ p2 = triangle.get_Vertex(1);
XYZ p3 = triangle.get_Vertex(2);
vertices.Clear();
vertices.Add(p1);
vertices.Add(p2);
vertices.Add(p3);
TessellatedFace tf
= new TessellatedFace(
vertices, materialId);
if (builder.DoesFaceHaveEnoughLoopsAndVertices(tf))
{
builder.AddFace(tf);
++nTriangles;
}
}
#endif // USE_FACE_TRIANGULATION
#endregion // Use face triangulation
#region Use original solid and its EdgeLoops
#if USE_EDGELOOPS
// This returns arbitrarily ordered and
// oriented edges, so no solid can be
// generated.
foreach (EdgeArray loop in f.EdgeLoops)
{
foreach (Edge e in loop)
{
XYZ p = e.AsCurve().GetEndPoint(0);
XYZ q = p;
if (pts.ContainsKey(p))
{
KeyValuePair <XYZ, int> kv = pts[p];
q = kv.Key;
int n = kv.Value;
pts[p] = new KeyValuePair <XYZ, int>(
q, ++n);
Debug.Print("Ignoring vertex at {0} "
+ "with distance {1} to existing "
+ "vertex {2}",
p, p.DistanceTo(q), q);
}
else
{
pts[p] = new KeyValuePair <XYZ, int>(
p, 1);
}
vertices.Add(q);
++nVertices;
}
}
#endif // USE_EDGELOOPS
#endregion // Use original solid and its EdgeLoops
#region Use original solid and GetEdgesAsCurveLoops
#if USE_AS_CURVE_LOOPS
// The solids generated by this have some weird
// normals, so they do not render correctly in
// the Forge viewer. Revert to triangles again.
IList <CurveLoop> loops
= f.GetEdgesAsCurveLoops();
foreach (CurveLoop loop in loops)
{
foreach (Curve c in loop)
{
XYZ p = c.GetEndPoint(0);
XYZ q = p;
if (pts.ContainsKey(p))
{
KeyValuePair <XYZ, int> kv = pts[p];
q = kv.Key;
int n = kv.Value;
pts[p] = new KeyValuePair <XYZ, int>(
q, ++n);
Debug.Print("Ignoring vertex at {0} "
+ "with distance {1} to existing "
+ "vertex {2}",
p, p.DistanceTo(q), q);
}
else
{
pts[p] = new KeyValuePair <XYZ, int>(
p, 1);
}
vertices.Add(q);
++nVertices;
}
}
#endif // USE_AS_CURVE_LOOPS
#endregion // Use original solid and GetEdgesAsCurveLoops
builder.AddFace(new TessellatedFace(
vertices, materialId));
++nFaces;
}
#endif // CREATE_NEW_SOLID_USING_TESSELATION
#endregion // Create a new solid based on tessellation of the invalid room closed shell solid
builder.CloseConnectedFaceSet();
builder.Target = TessellatedShapeBuilderTarget.AnyGeometry; // Solid failed
builder.Fallback = TessellatedShapeBuilderFallback.Mesh; // use Abort if target is Solid
builder.Build();
result = builder.GetBuildResult();
// Debug printout log of current solid's glTF facet data
n = coords.Count - coordsBase;
Debug.Print("{0} glTF vertex coordinates "
+ "in millimetres:", n);
Debug.Print(string.Join(" ", coords
.TakeWhile <IntPoint3d>((p, i) => coordsBase <= i)
.Select <IntPoint3d, string>(p => p.ToString())));
n = indices.Count - indicesBase;
Debug.Print("{0} glTF triangles:", n);
Debug.Print(string.Join(" ", indices
.TakeWhile <TriangleIndices>((ti, i) => indicesBase <= i)
.Select <TriangleIndices, string>(ti => ti.ToString())));
}
}
}
return(result.GetGeometricalObjects());
}
/// <summary>
/// Combine coplanar triangles from the faceted body if they share the edge. From this process, polygonal faces (with or without holes) will be created
/// </summary>
public void SimplifyAndMergeFaces(bool ignoreMerge = false)
{
int eulerBefore = ignoreMerge ? 0 : CalculateEulerCharacteristic();
int noTriangle = GetTriangleCount();
IEqualityComparer <XYZ> normalComparer = new VectorCompare();
Dictionary <XYZ, List <int> > faceSortedByNormal = new Dictionary <XYZ, List <int> >(normalComparer);
for (int ef = 0; ef < noTriangle; ++ef)
{
IList <int> vertIndex = new List <int>();
if (IsMesh)
{
MeshTriangle f = m_MeshGeom.get_Triangle(ef);
vertIndex = new List <int>(3)
{
(int)f.get_Index(0), (int)f.get_Index(1), (int)f.get_Index(2)
};
}
else
{
TriangleInShellComponent f = m_Geom.GetTriangle(ef);
vertIndex = new List <int>(3)
{
f.VertexIndex0, f.VertexIndex1, f.VertexIndex2
};
}
IndexFace intF = new IndexFace(vertIndex, ref m_MeshVertices);
m_FacesCollDict.Add(faceIdxOffset++, intF); // Keep faces in a dictionary and assigns ID
List <int> fIDList;
if (!faceSortedByNormal.TryGetValue(intF.Normal, out fIDList))
{
fIDList = new List <int>(1)
{
ef
};
faceSortedByNormal.Add(intF.Normal, fIDList);
}
else if (!fIDList.Contains(ef))
{
fIDList.Add(ef);
}
}
foreach (KeyValuePair <XYZ, List <int> > fListDict in faceSortedByNormal)
{
List <int> mergedFaceList = null;
if (fListDict.Value.Count > 1)
{
if (!ignoreMerge)
{
TryMergeFaces(fListDict.Value, out mergedFaceList);
}
else
{
// keep original face list
mergedFaceList = fListDict.Value;
}
if (mergedFaceList != null && mergedFaceList.Count > 0)
{
// insert only new face indexes as the mergedlist from different vertices can be duplicated
foreach (int fIdx in mergedFaceList)
{
if (!m_MergedFaceSet.Contains(fIdx))
{
m_MergedFaceSet.Add(fIdx);
}
}
}
}
else if (!m_MergedFaceSet.Contains(fListDict.Value[0]))
{
m_MergedFaceSet.Add(fListDict.Value[0]); // No pair face, add it into the mergedList
}
}
// Remove unused vertices
CleanVerticesAndUpdateIndexes();
int eulerAfter = ignoreMerge ? 0 : CalculateEulerCharacteristic();
if (eulerBefore != eulerAfter)
{
throw new InvalidOperationException(); // Coplanar merge broke the mesh in some way, so we need to fall back to exporting a triangular mesh
}
}
/// <summary>
/// Combine coplanar triangles from the faceted body if they share the edge. From this process, polygonal faces (with or without holes) will be created
/// </summary>
public void SimplifyAndMergeFaces()
{
int eulerBefore = CalculateEulerCharacteristic();
int noTriangle = (IsMesh) ? _meshGeom.NumTriangles : _geom.TriangleCount;
int noVertices = (IsMesh) ? _meshGeom.Vertices.Count : _geom.VertexCount;
IEqualityComparer <XYZ> normalComparer = new vectorCompare();
Dictionary <XYZ, List <int> > faceSortedByNormal = new Dictionary <XYZ, List <int> >(normalComparer);
for (int ef = 0; ef < noTriangle; ++ef)
{
IList <int> vertIndex = new List <int>();
if (IsMesh)
{
MeshTriangle f = _meshGeom.get_Triangle(ef);
vertIndex.Add((int)f.get_Index(0));
vertIndex.Add((int)f.get_Index(1));
vertIndex.Add((int)f.get_Index(2));
}
else
{
TriangleInShellComponent f = _geom.GetTriangle(ef);
vertIndex.Add(f.VertexIndex0);
vertIndex.Add(f.VertexIndex1);
vertIndex.Add(f.VertexIndex2);
}
IndexFace intF = new IndexFace(vertIndex);
facesColl.Add(ef, intF); // Keep faces in a dictionary and assigns ID
List <int> fIDList;
if (!faceSortedByNormal.TryGetValue(intF.normal, out fIDList))
{
fIDList = new List <int>();
fIDList.Add(ef);
faceSortedByNormal.Add(intF.normal, fIDList);
}
else
{
if (!fIDList.Contains(ef))
{
fIDList.Add(ef);
}
}
}
foreach (KeyValuePair <XYZ, List <int> > fListDict in faceSortedByNormal)
{
List <int> mergedFaceList = null;
if (fListDict.Value.Count > 1)
{
TryMergeFaces(fListDict.Value, out mergedFaceList);
if (mergedFaceList != null && mergedFaceList.Count > 0)
{
// insert only new face indexes as the mergedlist from different vertices can be duplicated
foreach (int fIdx in mergedFaceList)
{
if (!_mergedFaceList.Contains(fIdx))
{
_mergedFaceList.Add(fIdx);
}
}
}
}
else if (!_mergedFaceList.Contains(fListDict.Value[0]))
{
_mergedFaceList.Add(fListDict.Value[0]); // No pair face, add it into the mergedList
}
}
int eulerAfter = CalculateEulerCharacteristic();
if (eulerBefore != eulerAfter)
{
throw new InvalidOperationException(); // Coplanar merge broke the mesh in some way, so we need to fall back to exporting a triangular mesh
}
}
private void _solidToMeshGeometry3D(Solid solid)
{
try
{
IList <Solid> solids = SolidUtils.SplitVolumes(solid);
foreach (Solid _solid in solids)
{
if (SolidUtils.IsValidForTessellation(_solid))
{
var material = this.getMaterial(_solid);
TriangulatedSolidOrShell shell = SolidUtils.TessellateSolidOrShell(_solid, control);
for (int i = 0; i < shell.ShellComponentCount; i++)
{
try
{
TriangulatedShellComponent component = shell.GetShellComponent(i);
MeshGeometry3D WPFMesh = new MeshGeometry3D();
Point3D[] points = new Point3D[component.VertexCount];
WPFMesh.TriangleIndices = new System.Windows.Media.Int32Collection();
for (int j = 0; j < component.TriangleCount; j++)
{
TriangleInShellComponent triangle = component.GetTriangle(j);
WPFMesh.TriangleIndices.Add(triangle.VertexIndex0);
XYZ p = inverse.OfPoint(component.GetVertex(triangle.VertexIndex0));
points[triangle.VertexIndex0] = new Point3D(p.X, p.Y, p.Z);
WPFMesh.TriangleIndices.Add(triangle.VertexIndex1);
p = inverse.OfPoint(component.GetVertex(triangle.VertexIndex1));
points[triangle.VertexIndex1] = new Point3D(p.X, p.Y, p.Z);
WPFMesh.TriangleIndices.Add(triangle.VertexIndex2);
p = inverse.OfPoint(component.GetVertex(triangle.VertexIndex2));
points[triangle.VertexIndex2] = new Point3D(p.X, p.Y, p.Z);
}
WPFMesh.Positions = new Point3DCollection(points);
if (this._territory.IntersectsWith(WPFMesh.Bounds))
{
GeometryModel3D geometryModel3D = new GeometryModel3D(WPFMesh, material);
this.WPFGeometries.Add(geometryModel3D);
solidNum++;
}
else
{
outOfTerritory++;
}
}
catch (Exception e)
{
failedAttempt++;
reporter.AppendLine(string.Format("{0}: Failed to parse Solid:\n {1}", failedAttempt.ToString(), e.Report()));
}
}
}
else
{
MessageBox.Show("Solid not valid for tessellation!");
}
}
}
catch (Exception e)
{
failedAttempt++;
reporter.AppendLine(string.Format("{0}: Failed to parse S0lid:\n {1}", failedAttempt.ToString(), e.Report()));
}
}
/// <summary>
/// Combine coplanar triangles from the faceted body if they share the edge. From this process, polygonal faces (with or without holes) will be created
/// </summary>
public void SimplifyAndMergeFaces()
{
int noTriangle = _geom.TriangleCount;
int noVertices = _geom.VertexCount;
for (int ef = 0; ef < noTriangle; ++ef)
{
TriangleInShellComponent f = _geom.GetTriangle(ef);
IList <int> vertIndex = new List <int>();
vertIndex.Add(f.VertexIndex0);
vertIndex.Add(f.VertexIndex1);
vertIndex.Add(f.VertexIndex2);
IndexFace intF = new IndexFace(vertIndex);
facesColl.Add(ef, intF); // Keep faces in a dictionary and assigns ID
SortVertAndFaces(f.VertexIndex0, ef);
SortVertAndFaces(f.VertexIndex1, ef);
SortVertAndFaces(f.VertexIndex2, ef);
}
// After the above, we have a sorted polyhedron vertices that contains hashset of faces it belongs to
// Loop through the dictionary to merge faces that have the same normal (on the same plane)
foreach (KeyValuePair <int, HashSet <int> > dictItem in sortedFVert)
{
IEqualityComparer <XYZ> normalComparer = new vectorCompare();
Dictionary <XYZ, List <int> > faceSortedByNormal = new Dictionary <XYZ, List <int> >(normalComparer);
List <int> fIDList;
foreach (int fID in dictItem.Value)
{
IndexFace f = facesColl[fID];
if (!faceSortedByNormal.TryGetValue(f.normal, out fIDList))
{
fIDList = new List <int>();
fIDList.Add(fID);
faceSortedByNormal.Add(f.normal, fIDList);
}
else
{
if (!fIDList.Contains(fID))
{
fIDList.Add(fID);
}
}
}
foreach (KeyValuePair <XYZ, List <int> > fListDict in faceSortedByNormal)
{
List <int> mergedFaceList = null;
if (fListDict.Value.Count > 1)
{
TryMergeFaces(fListDict.Value, out mergedFaceList);
if (mergedFaceList != null && mergedFaceList.Count > 0)
{
// insert only new face indexes as the mergedlist from different vertices can be duplicated
foreach (int fIdx in mergedFaceList)
{
if (!_mergedFaceList.Contains(fIdx))
{
_mergedFaceList.Add(fIdx);
}
}
}
}
else
if (!_mergedFaceList.Contains(fListDict.Value[0]))
{
_mergedFaceList.Add(fListDict.Value[0]); // No pair face, add it into the mergedList
}
}
}
}
/*
* void f()
* {
* var cx, cy, cz, volume, v, i, x1, y1, z1, x2, y2, z2, x3, y3, z3;
* volume = 0;
* cx = 0; cy = 0; cz = 0;
* // Assuming vertices are in vertX[i], vertY[i], and vertZ[i]
* // and faces are faces[i, j] where the first index indicates the
* // face and the second index indicates the vertex of that face
* // The value in the faces array is an index into the vertex array
* i = 0;
* repeat (numFaces) {
* x1 = vertX[faces[i, 0]]; y1 = vertY[faces[i, 0]]; z1 = vertZ[faces[i, 0]];
* x2 = vertX[faces[i, 1]]; y2 = vertY[faces[i, 1]]; z2 = vertZ[faces[i, 1]];
* x3 = vertX[faces[i, 2]]; y3 = vertY[faces[i, 2]]; z3 = vertZ[faces[i, 2]];
* v = x1*(y2*z3 - y3*z2) + y1*(z2*x3 - z3*x2) + z1*(x2*y3 - x3*y2);
* volume += v;
* cx += (x1 + x2 + x3)*v;
* cy += (y1 + y2 + y3)*v;
* cz += (z1 + z2 + z3)*v;
* i += 1;
* }
* // Set centroid coordinates to their final value
* cx /= 4 * volume;
* cy /= 4 * volume;
* cz /= 4 * volume;
* // And, just in case you want to know the total volume of the model:
* volume /= 6;
* }
*/
CentroidVolume GetCentroid(Solid solid)
{
CentroidVolume cv = new CentroidVolume();
double v;
XYZ v0, v1, v2;
SolidOrShellTessellationControls controls
= new SolidOrShellTessellationControls();
controls.LevelOfDetail = 0;
TriangulatedSolidOrShell triangulation = null;
try
{
triangulation
= SolidUtils.TessellateSolidOrShell(
solid, controls);
}
catch (Autodesk.Revit.Exceptions
.InvalidOperationException)
{
return(null);
}
int n = triangulation.ShellComponentCount;
for (int i = 0; i < n; ++i)
{
TriangulatedShellComponent component
= triangulation.GetShellComponent(i);
int m = component.TriangleCount;
for (int j = 0; j < m; ++j)
{
TriangleInShellComponent t
= component.GetTriangle(j);
v0 = component.GetVertex(t.VertexIndex0);
v1 = component.GetVertex(t.VertexIndex1);
v2 = component.GetVertex(t.VertexIndex2);
v = v0.X * (v1.Y * v2.Z - v2.Y * v1.Z)
+ v0.Y * (v1.Z * v2.X - v2.Z * v1.X)
+ v0.Z * (v1.X * v2.Y - v2.X * v1.Y);
cv.Centroid += v * (v0 + v1 + v2);
cv.Volume += v;
}
}
// Set centroid coordinates to their final value
cv.Centroid /= 4 * cv.Volume;
XYZ diffCentroid = cv.Centroid
- solid.ComputeCentroid();
Debug.Assert(0.6 > diffCentroid.GetLength(),
"expected centroid approximation to be "
+ "similar to solid ComputeCentroid result");
// And, just in case you want to know
// the total volume of the model:
cv.Volume /= 6;
double diffVolume = cv.Volume - solid.Volume;
Debug.Assert(0.3 > Math.Abs(
diffVolume / cv.Volume),
"expected volume approximation to be "
+ "similar to solid Volume property value");
return(cv);
}
