} // end WriteCountTrees
private void WriteTreeCalcValues(string volType, StreamWriter strWriteOut, reportHeaders rh,
IEnumerable <TreeCalculatedValuesDO> cvList, IEnumerable <TreeDO> tList, ref int pageNumb)
{
// which heights to be used?
int hgtOne = 0;
int hgtTwo = 0;
whichHeightFields(ref hgtOne, ref hgtTwo, tList);
// replace as needed header lines
string[] headerToPrint = new string[10];
if (volType == "CUFT" || volType == "BDFT")
{
headerToPrint = updateHeightHeader(hgtOne, hgtTwo, "", rh.A05A07columns);
headerToPrint[9] = headerToPrint[9].Replace("VVVV", volType);
}
else if (volType == "VALUE")
{
headerToPrint = updateHeightHeader(hgtOne, hgtTwo, "", rh.A06columns);
}
else if (volType == "BIOMASS")
{
headerToPrint = updateHeightHeader(hgtOne, hgtTwo, "", rh.A10columns);
}
// print lines
foreach (TreeDO tl in tList)
{
WriteReportHeading(strWriteOut, rh.reportTitles[0], rh.reportTitles[1], rh.reportTitles[2],
headerToPrint, 19, ref pageNumb, "");
if ((tl.CountOrMeasure == "M" && tl.ExpansionFactor > 0) ||
(tl.Stratum.Method == "FIXCNT"))
{
switch (volType)
{
case "CUFT":
prtFields = TreeListMethods.buildPrintArray(tl, mainHeaderFields[3].ToString(), cvList,
hgtOne, hgtTwo, volType);
break;
case "BDFT":
prtFields = TreeListMethods.buildPrintArray(tl, mainHeaderFields[3].ToString(), cvList,
hgtOne, hgtTwo, volType);
break;
case "VALUE":
prtFields = TreeListMethods.buildPrintArray(tl, tcvList, hgtOne, hgtTwo, "value");
break;
case "BIOMASS":
prtFields = TreeListMethods.buildPrintArray(tl, tcvList, hgtOne, hgtTwo, "biomass");
break;
} // switch on volType
printOneRecord(fieldLengths, prtFields, strWriteOut);
} // endif count or measure tree
} // end foreach loop
return;
} // end WriteTreeCalcValues
} // end WritePlot
private void WriteTree(StreamWriter strWriteOut, reportHeaders rh, ref int pageNumb, IEnumerable <TreeDO> tList)
{
if (currentReport == "A13")
{
// output tree table information
foreach (TreeDO tdo in tList)
{
WriteReportHeading(strWriteOut, rh.reportTitles[0], "TREE TABLE INFORMATION",
rh.reportTitles[2], rh.A13tree, 7, ref pageNumb, "");
prtFields = TreeListMethods.buildPrintArray(tdo);
printOneRecord(fieldLengths, prtFields, strWriteOut);
} // end foreach loop
}
else if (currentReport == "A03")
{
// Output records
foreach (TreeDO tdo in tList)
{
WriteReportHeading(strWriteOut, rh.reportTitles[0], rh.reportTitles[1], rh.reportTitles[2],
completeHeader, 18, ref pageNumb, "");
TreeListMethods.buildPrintArray(tdo, fieldsToPrint, ref fieldLengths, ref prtFields);
printOneRecord(fieldLengths, prtFields, strWriteOut);
prtFields.Clear();
// Write remarks after tree data
if (tdo.Remarks != "" && tdo.Remarks != null)
{
StringBuilder sb = new StringBuilder();
sb.Append(" REMARKS: ");
sb.Append(tdo.Remarks);
strWriteOut.WriteLine(sb.ToString());
numOlines++;
}
} // end foreach loop
} // endif
return;
} // end WriteTree
public int TableEditChecks(IEnumerable <SaleDO> saleList, IEnumerable <StratumDO> strList,
IEnumerable <CountTreeDO> cntList, IEnumerable <TreeDO> tList, IEnumerable <SampleGroupDO> sgList)
{
ErrorLogMethods.fileName = fileName;
string currentRegion = Global.BL.getRegion();
string isVLL = "";
//string isVLL = Global.BL.getVLL();
// edit checks for each table
// sale table
// empty or more than one record?
errorValue = SaleMethods.MoreThanOne(saleList);
if (errorValue == 0)
{
ErrorLogMethods.LoadError("Sale", "E", "25", errorValue, "NoName"); // error 25 -- table cannot be empty
}
else if (errorValue > 1)
{
ErrorLogMethods.LoadError("Sale", "E", "28", errorValue, "SaleNumber"); // error 28 -- more than one sale record not allowed
}
if (errorValue == 1)
{
// and blank sale number
errorValue = SaleMethods.BlankSaleNum(saleList);
if (errorValue != -1)
{
ErrorLogMethods.LoadError("Sale", "E", " 8Sale Number", errorValue, "SaleNumber");
}
} // endif
// end sale table edit checks
// *******************************************************************
// stratum table
// List<StratumDO> strList = Global.BL.getStratum();
errorValue = StratumMethods.IsEmpty(strList);
if (errorValue != 0)
{
ErrorLogMethods.LoadError("Stratum", "E", errorValue.ToString(), errorValue, "NoName");
}
else if (errorValue == 0) // means there are records to check
{
foreach (StratumDO sdo in strList)
{
// check for valid fixed plot size or BAF for each stratum
double BAForFPS = StratumMethods.CheckMethod(strList, sdo.Code);
if ((sdo.Method == "PNT" || sdo.Method == "P3P" || sdo.Method == "PCM" ||
sdo.Method == "PCMTRE" || sdo.Method == "3PPNT") && BAForFPS == 0)
{
ErrorLogMethods.LoadError("Stratum", "E", "22", (long)sdo.Stratum_CN, "BasalAreaFactor");
}
else if ((sdo.Method == "FIX" || sdo.Method == "F3P" || sdo.Method == "FIXCNT" ||
sdo.Method == "FCM") && BAForFPS == 0)
{
ErrorLogMethods.LoadError("Stratum", "E", "23", (long)sdo.Stratum_CN, "FixedPlotSize");
}
// check for acres on area based methods
double currAcres = Utilities.AcresLookup((long)sdo.Stratum_CN, sdo.Code);
if ((sdo.Method == "PNT" || sdo.Method == "FIX" || sdo.Method == "P3P" ||
sdo.Method == "F3P" || sdo.Method == "PCM" || sdo.Method == "3PPNT" ||
sdo.Method == "FCM" || sdo.Method == "PCMTRE") && currAcres == 0)
{
ErrorLogMethods.LoadError("Stratum", "E", "24", (long)sdo.Stratum_CN, "NoName");
}
else if ((sdo.Method == "100" || sdo.Method == "3P" ||
sdo.Method == "S3P" || sdo.Method == "STR") && currAcres == 0)
{
ErrorLogMethods.LoadError("Stratum", "W", "Stratum has no acres", (long)sdo.Stratum_CN, "NoName");
}
// August 2017 -- added check for valid yield component code
if (sdo.YieldComponent != "CL" && sdo.YieldComponent != "CD" &&
sdo.YieldComponent != "ND" && sdo.YieldComponent != "NL" &&
sdo.YieldComponent != "" && sdo.YieldComponent != " " &&
sdo.YieldComponent != null)
{
ErrorLogMethods.LoadError("Stratum", "W", "Yield Component has invalid code", (long)sdo.Stratum_CN, "YieldComponent");
}
} // end foreach loop
} // endif
// end stratum table edit checks
// ************************************************************************
// cutting unit table
//List<CuttingUnitDO> cuList = Global.BL.getCuttingUnits();
errorValue = CuttingUnitMethods.IsEmpty(Global.BL.getCuttingUnits());
if (errorValue != 0)
{
ErrorLogMethods.LoadError("Cutting Unit", "E", errorValue.ToString(), 0, "NoName");
}
// end cutting unit edit checks
// **************************************************************************
// count table
//List<CountTreeDO> cntList = Global.BL.getCountTrees();
foreach (StratumDO sl in strList)
{
errorValue = CountTreeMethods.check3Pcounts(cntList, sl);
if (errorValue != 0)
{
ErrorLogMethods.LoadError("CountTree", "E", "Cannot tally by sample group for 3P strata.", (long)sl.Stratum_CN, "TreeDefaultValue");
}
} // end foreach on stratum
// **************************************************************************
// tree table
//List<TreeDO> tList = Global.BL.getTrees();
errorValue = TreeListMethods.IsEmpty(tList);
if (errorValue != 0)
{
ErrorLogMethods.LoadError("Tree", "E", errorValue.ToString(), 0, "NoName");
}
else if (errorValue == 0) // means tree table has records
{
// make sure single stratum is NOT FIXCNT which cannot have measured trees anyway.
//if(strList.Count == 1 && strList[0].Method != "FIXCNT")
// doesn't matter if it's a single stratum or any stratum that's FIXCNT
// that method still has no measured trees so need to skip these checks.
if (strList.First().Method != "FIXCNT")
{
var tMeas = tList.Select(tree => tree.CountOrMeasure = "M");
//tList = Global.BL.JustMeasuredTrees();
// March 2016 -- if the entire cruisde has no measured trees, that uis a critical erro
// and should stop the program. Since no report can be generated, a message box appears to warn the user
// of the condition.
if (tMeas.Count() == 0)
{
MessageBox.Show("NO MEASURED TREES IN THIS CRUISE.\nCannot continue and cannot produce any reports.", "ERROR", MessageBoxButtons.OK, MessageBoxIcon.Stop);
return(-1);
} //endif
// general checks include checking for secondary top DIB greater than primary
// recoverable percent greater than seen defect primary
// missing species, product or uom when tree count is greater than zero or DBH is greater than zero
// and check for upper stem diameter greater than DBH
errorValue = TreeListMethods.GeneralChecks(tList, currentRegion);
} // endif single stratum
} // endif
// end tree table edit checks
// *************************************************************************
// log table
List <LogDO> logList = Global.BL.getLogs().ToList();
if (logList.Count > 0)
{
errorValue = LogMethods.CheckNumberLogs(logList);
errorValue = LogMethods.CheckFBS(logList);
if (isVLL == "true")
{
errorValue = LogMethods.CheckVLL(logList);
}
errorValue = LogMethods.CheckDefect(logList);
if (currentRegion != "05")
{
errorValue = LogMethods.CheckLogGrade(logList);
}
} // endif records in log table to check
// end log table edit checks
// *************************************************************************
// volume equation table
List <VolumeEquationDO> volList = Global.BL.getVolumeEquations().ToList();
errorValue = VolumeEqMethods.IsEmpty(volList);
// pull region
string currRegion = saleList.First().Region;
//string currRegion = Global.BL.getRegion();
if (errorValue != 0)
{
ErrorLogMethods.LoadError("VolumeEquation", "E", errorValue.ToString(), 0, "NoName");
}
else if (errorValue == 0) // means the table is not empty and checks can proceed
{
// Match unique species/product to volume equation \
errorValue = VolumeEqMethods.MatchSpeciesProduct(volList, tList);
errorValue = VolumeEqMethods.GeneralEquationChecks(volList);
// if VLL, check equations for Behrs
if (isVLL == "true")
{
errorValue = VolumeEqMethods.FindBehrs(volList);
}
} // endif
// end volume equation edit checks
// *************************************************************************
// value equations
// Check for valid equations
IEnumerable <ValueEquationDO> valList = Global.BL.getValueEquations();
if (valList.Any()) // there are records to check
{
errorValue = ValueEqMethods.CheckEquations(valList, currentRegion);
}
// end value equation edit checks
// *************************************************************************
// quality adjustment equations
IEnumerable <QualityAdjEquationDO> qaeList = Global.BL.getQualAdjEquations();
if (qaeList.Any()) // there are records to check
{
errorValue = QualityAdjMethods.CheckEquations(qaeList);
}
// end quality adjustment equation edit checks
// ************************************************************************
// June 2014 -- apparently the error log table is not meant to capture
// errors on the basis of an entire table. Only on individual records.
// so if no reports have been selected, this check needs to move to
// the Output section when the user clicks GO. If the reports list
// comes up empty then display a message box telling them to go back
// and enter reports.
// no reports selected
/*
* List<ReportsDO> selectedReports = Global.BL.GetSelectedReports();
* if (selectedReports.Count == 0)
* {
* ErrorLogMethods.LoadError("Reports", "E", "26", 0,"NoName");
* errorValue++;
* } // endif no reports
*/
// ************************************************************************
// sample group table
//List<SampleGroupDO> sampGroups = Global.BL.getSampleGroups();
errorValue = SampleGroupMethods.CheckAllUOMandCutLeave(strList, sgList, fileName);
// ************************************************************************
errList = ErrorLogMethods.errList;
if (errList.Count > 0)
{
Global.BL.SaveErrorMessages(errList);
} // endif
return(errorValue);
} // end TableEditChecks
public void OutputListReports(StreamWriter strWriteOut, reportHeaders rh, ref int pageNumb)
{
// Fill report title array
string currentTitle = fillReportTitle(currentReport);
// create report title
if (currentReport == "A05")
{
rh.createReportTitle(currentTitle, 3, 15, 45, "", "");
}
else if (currentReport == "A06")
{
rh.createReportTitle(currentTitle, 2, 25, 0, "", "");
}
else if (currentReport == "A07")
{
rh.createReportTitle(currentTitle, 3, 15, 45, "", "");
}
else if (currentReport == "A15")
{
rh.createReportTitle(currentTitle, 5, 0, 0, reportConstants.NSPO, "");
}
else
{
rh.createReportTitle(currentTitle, 1, 0, 0, "", "");
}
// Which report? Previous report number in parens
numOlines = 0;
switch (currentReport)
{
case "A01": // Strata, Unit, and Payment unit Report
// stratum page
numOlines = 0;
//List<StratumDO> sList = Global.BL.getStratum();
fieldLengths = new int[] { 5, 11, 7, 9, 8, 9, 6, 6, 27, 2, 4 };
prtFields.Clear();
WriteStratum(strWriteOut, rh, Global.BL.getStratum(), ref pageNumb);
// cutting unit page
numOlines = 0;
List <CuttingUnitDO> cList = Global.BL.getCuttingUnits().ToList();
// page 2 -- cutting units
fieldLengths = new int[] { 5, 17, 8, 10, 28, 9, 3 };
WriteUnit(1, strWriteOut, rh, cList, ref pageNumb);
// payment unit page
numOlines = 0;
fieldLengths = new int[] { 5, 13, 9, 9, 4 };
WriteUnit(2, strWriteOut, rh, cList, ref pageNumb);
// sample group page
numOlines = 0;
fieldLengths = new int[] { 2, 10, 7, 7, 7, 7, 7, 25 };
//List<SampleGroupDO> sgList = Global.BL.getSampleGroups();
WriteSampleGroup(strWriteOut, rh, Global.BL.getSampleGroups(), ref pageNumb);
break;
case "A02": // Listing of plot identification information (page three from old A1 report)List<PlotDO> pList = Global.BL.getPlots();
//pList = Global.BL.getPlotsOrdered();
fieldLengths = new int[] { 5, 9, 11, 10, 6, 9, 8, 7, 3 };
prtFields.Clear();
if (!Global.BL.getPlotsOrdered().Any())
{
noDataForReport(strWriteOut, currentReport, " >>>> No data for report in Plot table");
return;
} // endif no data
WritePlot(strWriteOut, rh, ref pageNumb);
break;
case "A03": // Listing of individual tree measurements and characteristics (A2)
List <TreeDO> tList = Global.BL.getTreesSorted().ToList();
// what fields to print?
fieldsToPrint = TreeListMethods.CheckForData(tList);
// Build column headings based on fields to print
completeHeader = TreeListMethods.BuildColumnHeaders(rh.A03columns, fieldsToPrint);
fieldLengths = new int[fieldsToPrint.Count];
prtFields.Clear();
WriteTree(strWriteOut, rh, ref pageNumb, tList);
break;
case "A04": // Listing of count table information (count page from A2 report)
//List<CountTreeDO> ctList = Global.BL.getCountsOrdered();
fieldLengths = new int[] { 3, 9, 10, 6, 13, 7, 8, 8, 11, 1 };
prtFields.Clear();
// no data?
if (!Global.BL.getCountsOrdered().Any())
{
noDataForReport(strWriteOut, currentReport, " >>>> No data for report in Count table");
return;
} // endif no data
WriteCountTrees(strWriteOut, rh, Global.BL.getCountsOrdered(), ref pageNumb);
break;
case "A05": // Listing of cubic foot volume (A5)
//tList = Global.BL.getTreesSorted();
tcvList = Global.BL.getTreeCalculatedValues().ToList();
fieldLengths = new int[] { 1, 3, 4, 5, 5, 7, 6, 4, 4, 8, 9, 8, 9, 8, 8, 9, 9, 9, 8, 8 };
prtFields.Clear();
// no data?
summedValue = tcvList.Sum(cvdo => cvdo.GrossCUFTPP);
if (summedValue == 0)
{
noDataForReport(strWriteOut, currentReport, " >>>> No cubic foot volume for report");
return;
} // endif no data for report
WriteTreeCalcValues("CUFT", strWriteOut, rh, tcvList, Global.BL.getTreesSorted(), ref pageNumb);
break;
case "A07": // Listing of board foot volume (A7)
//tList = Global.BL.getTreesSorted();
tcvList = Global.BL.getTreeCalculatedValues().ToList();
fieldLengths = new int[] { 1, 3, 4, 5, 5, 7, 6, 4, 4, 8, 9, 8, 9, 8, 8, 9, 9, 9, 8, 8 };
prtFields.Clear();
// no data?
summedValue = tcvList.Sum(cvdo => cvdo.GrossBDFTPP);
if (summedValue == 0)
{
noDataForReport(strWriteOut, currentReport, " >>>> No board foot volume for report");
return;
} // endif no data for report
WriteTreeCalcValues("BDFT", strWriteOut, rh, tcvList, Global.BL.getTreesSorted(), ref pageNumb);
break;
case "A06": // Listing of dollar value for each tree (A6)
//tList = Global.BL.getTrees();
tcvList = Global.BL.getTreeCalculatedValues().ToList();
fieldLengths = new int[] { 1, 3, 4, 5, 5, 8, 6, 4, 6, 15, 15, 9, 9, 11, 15, 15 };
prtFields.Clear();
// no data?
summedValue = tcvList.Sum(tcvdo => tcvdo.ValuePP);
if (summedValue == 0)
{
noDataForReport(strWriteOut, currentReport, " >>>> No dollar value data for this report");
return;
} // endif no data for report
WriteTreeCalcValues("VALUE", strWriteOut, rh, tcvList, Global.BL.getTrees(), ref pageNumb);
break;
case "A08": // Listing of log grade information (A3)
//List<LogDO> logList = Global.BL.getLogs();
if (!Global.BL.getLogs().Any())
{
noDataForReport(strWriteOut, currentReport, " >>>> No log data for this report");
return;
} // endif logList empty
//tList = Global.BL.getTreesSorted();
fieldLengths = new int[] { 1, 3, 4, 5, 8, 5, 2, 4, 7, 5, 2, 4, 7, 5, 2, 4, 7, 5, 2, 4, 7, 5, 2, 4, 7 };
prtFields.Clear();
WriteLogList(strWriteOut, rh, Global.BL.getLogs(), Global.BL.getTreesSorted(), ref pageNumb);
break;
case "A09": // Listing of log detail information for Fall, Buck and Scale (A4)
List <TreeDO> justFBS = Global.BL.getTrees().Where(tdo => tdo.IsFallBuckScale == 1).ToList();
if (justFBS.Count == 0)
{
noDataForReport(strWriteOut, currentReport, " >>>> No fall, buck and scale trees for this report.");
return;
} // endif
fieldLengths = new int[] { 1, 3, 4, 5, 6, 5, 6, 6, 5, 3, 10, 7, 10, 7, 5, 5 };
prtFields.Clear();
WriteFallBuckScale(strWriteOut, rh, justFBS, ref pageNumb, Global.BL.getLogStock());
break;
case "A10": // Listing of calculated biomass weights by component (A9)
//tList = Global.BL.getTrees();
tcvList = Global.BL.getTreeCalculatedValues().ToList();
fieldLengths = new int[] { 1, 4, 5, 5, 5, 7, 6, 4, 5, 9, 10, 9, 9, 10, 9, 9, 9, 9, 9 };
prtFields.Clear();
// Sum up mainsteam primary to determine if report can be printed
summedValue = tcvList.Sum(tcvdo => tcvdo.BiomassMainStemPrimary);
if (summedValue == 0)
{
noDataForReport(strWriteOut, currentReport, " >>>> No biomass data for this report");
return;
} // endif summedValue
WriteTreeCalcValues("BIOMASS", strWriteOut, rh, tcvList, Global.BL.getTrees(), ref pageNumb);
break;
case "A13": // Listing of geospatial information (A14)
// This report prints two separate pages -- one for plot information and one for tree information
// plot information
// = Global.BL.getPlots();
fieldLengths = new int[] { 2, 5, 6, 4, 13, 11, 12, 1 };
prtFields.Clear();
WritePlot(strWriteOut, rh, ref pageNumb);
// tree information
//tList = Global.BL.getTrees();
fieldLengths = new int[10] {
2, 3, 3, 3, 4, 3, 3, 11, 11, 11
};
prtFields.Clear();
// reset headers
rh.createReportTitle(currentTitle, 1, 0, 0, "", "");
numOlines = 0;
WriteTree(strWriteOut, rh, ref pageNumb, Global.BL.getTrees());
break;
case "A15": // listing of merch rules
fieldLengths = new int[] { 1, 13, 9, 10, 18, 18, 14, 13, 10, 3 };
prtFields.Clear();
numOlines = 0;
WriteMerchRules(strWriteOut, rh, Global.BL.getVolumeEquations(), ref pageNumb);
break;
case "L1": // Log listing
fieldLengths = new int[] { 2, 3, 4, 5, 5, 7, 3, 4, 5, 7, 7, 9, 3, 4, 6, 7, 7, 8, 7, 7, 7, 3, 8 };
prtFields.Clear();
// no data?
if (!Global.BL.getLogStockSorted().Any())
{
noDataForReport(strWriteOut, currentReport, " >>>> No log stock data for this report.");
return;
} // endif no logs
WriteLogStock(strWriteOut, rh, Global.BL.getLogStockSorted(), ref pageNumb);
break;
} // end switch on currentReport
return;
} // end OutputListReports
} // end LoadError
// Method checks here since not specific to one particular table
public int CheckCruiseMethods(List <StratumDO> strList, List <TreeDO> tList)
{
TreeListMethods Tlm = new TreeListMethods();
int errsFound = 0;
// pull trees by stratum for cruise method checks
foreach (StratumDO str in strList)
{
List <TreeDO> treeList = Tlm.GetCurrentStratum(tList, str.Code);
// warn user if the stratum has no trees at all
if (treeList.Count == 0)
{
string warnMsg = "WARNING! Stratum ";
warnMsg += str.Code;
warnMsg += " has no trees recorded. Some reports may not be complete.\nContinue?";
DialogResult dr = MessageBox.Show(warnMsg, "WARNING", MessageBoxButtons.YesNo, MessageBoxIcon.Warning);
if (dr == DialogResult.No)
{
return(-1);
}
} // endif no trees
// What needs to be checked? By method
switch (str.Method)
{
case "100":
// Check for all measured trees in stratum
errsFound += CheckAllMeasured(treeList);
// Check for tree count greater than 1
foreach (TreeDO tdo in treeList)
{
if (tdo.TreeCount > 1)
{
LoadError("Tree", "E", "10", (long)tdo.Tree_CN, "TreeCount");
errsFound++;
} // endif tree count greater than 1
} // end foreach loop
break;
case "FIX":
case "PNT":
// Check for all measured trees in stratum
errsFound += CheckAllMeasured(treeList);
// Check for no measured trees per sample group
errsFound += CheckForMeasuredTrees(treeList, (int)str.Stratum_CN, str.Method, bslyr);
break;
case "3P":
case "STR":
case "S3P":
// Check for measured trees with no DBH or height
errsFound += CheckForNoDBH(treeList);
// Check 3P only for measured trees with no KPI
if (str.Method == "3P")
{
errsFound += CheckForNoKPI(treeList);
}
// Check for sample group in CountTree with no measured tree
errsFound += CheckForMeasuredTrees(treeList, (int)str.Stratum_CN, str.Method, bslyr);
break;
case "F3P":
case "P3P":
// Check for measured tree with no KPI
errsFound += CheckForNoKPI(treeList);
// Check for measured trees with no DBH or height
errsFound += CheckForNoDBH(treeList);
// Check for no measured trees when total tree count > 0
errsFound += CheckForMeasuredTrees(treeList, (int)str.Stratum_CN, str.Method, bslyr);
break;
case "3PPNT":
foreach (TreeDO tdo in treeList)
{
// Check for blank product, uom and cut/leave on count trees
if (tdo.CountOrMeasure == "C" && tdo.SampleGroup.PrimaryProduct != "" &&
tdo.SampleGroup.UOM != "" && tdo.SampleGroup.CutLeave != "")
{
LoadError("Tree", "E", "16", (long)tdo.Tree_CN, "NoName");
errsFound++;
} // endif
// Check for blank species, product, UOM and cut/leave on measured trees numbered zero
if (tdo.CountOrMeasure == "M" && tdo.TreeNumber == 0 &&
tdo.Species != "" && tdo.SampleGroup.PrimaryProduct != "" &&
tdo.SampleGroup.UOM != "" && tdo.SampleGroup.CutLeave != "")
{
LoadError("Tree", "E", "16", (long)tdo.Tree_CN, "NoName");
errsFound++;
} // endif
// Check for count tree in a measured plot
// Pull plot records first
List <TreeDO> justPlots = treeList.FindAll(
delegate(TreeDO jp)
{
return(jp.CountOrMeasure == "M" && jp.Plot.PlotNumber == 0);
});
foreach (TreeDO jpo in justPlots)
{
if (jpo.CountOrMeasure == "C" && jpo.TreeNumber != 0)
{
LoadError("Tree", "E", "15", (long)tdo.Tree_CN, "NoName");
errsFound++;
} // endif
} // end foreach loop on justPlots
// Check for more than one sample group in the stratum
int nthRow = treeList.FindIndex(
delegate(TreeDO td)
{
return(tdo.SampleGroup.Code != treeList[0].SampleGroup.Code);
});
if (nthRow >= 0)
{
LoadError("Tree", "E", "17", (long)str.Stratum_CN, "NoName");
errsFound++;
} // endif nthRow
} // end foreach loop
// Check for no measured tree when total tree count > 0
errsFound += CheckForMeasuredTrees(treeList, (int)str.Stratum_CN, str.Method, bslyr);
break;
case "FIXCNT":
// no measured trees allowed
int mthRow = treeList.FindIndex(
delegate(TreeDO tdo)
{
return(tdo.CountOrMeasure == "M");
});
if (mthRow >= 0)
{
LoadError("Tree", "E", "9", (long)treeList[mthRow].Tree_CN, "CountOrMeasure");
errsFound++;
} // endif nthRow
// UOM must be 04
List <TreeDO> justUOM = treeList.FindAll(
delegate(TreeDO ju)
{
return(ju.SampleGroup.UOM != "04");
});
if (justUOM.Count > 0)
{
LoadError("SampleGroup", "E", "7", (long)str.Stratum_CN, "UOM");
errsFound++;
} // endif
break;
case "PCM":
case "FCM":
// Check for no measured tree when total tree count > 0
errsFound += CheckForMeasuredTrees(treeList, (int)str.Stratum_CN, str.Method, bslyr);
break;
} // end switch on method
} // end foreach loop on stratum
return(errsFound);
} // end CheckCruiseMethods