/// <summary>
/// Generates the switches for switches that either have literal strings appended, or have
/// different switches based on what the property is set to.
/// </summary>
/// <remarks>The string switch emits a switch that depends on what the parameter is set to, with and
/// arguments
/// e.g., Optimization = "Full" will emit /Ox, whereas Optimization = "Disabled" will emit /Od</remarks>
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
private void EmitStringSwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
String strSwitch = String.Empty;
strSwitch += toolSwitch.SwitchValue + toolSwitch.Separator;
StringBuilder val = new StringBuilder(GetEffectiveArgumentsValues(toolSwitch));
String str = toolSwitch.Value;
if (!toolSwitch.MultiValues)
{
str.Trim();
if (!str.StartsWith("\""))
{
str = "\"" + str;
if (str.EndsWith("\\") && !str.EndsWith("\\\\"))
{
str += "\\\"";
}
else
{
str += "\"";
}
}
val.Insert(0, str);
}
if ((strSwitch.Length == 0) && (val.ToString().Length == 0))
{
return;
}
clb.AppendSwitchUnquotedIfNotNull(strSwitch, val.ToString());
}
/// <summary>
/// Emit a switch that's a scalar task item
/// </summary>
private static void EmitTaskItemSwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
if (!String.IsNullOrEmpty(toolSwitch.Name))
{
clb.AppendSwitch(toolSwitch.Name + toolSwitch.Separator);
}
}
/// <summary>
/// Generates the commands for the switches that may have an array of arguments
/// The switch may be empty.
/// </summary>
/// <remarks>For stringarray switches (e.g., Sources), the toolSwitchName (if it exists) is emitted
/// along with each and every one of the file names separately (if no separator is included), or with all of the
/// file names separated by the separator.
/// e.g., AdditionalIncludeDirectores = "@(Files)" where Files has File1, File2, and File3, the switch
/// /IFile1 /IFile2 /IFile3 or the switch /IFile1;File2;File3 is emitted (the latter case has a separator
/// ";" specified)</remarks>
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
private static void EmitStringArraySwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
string[] ArrTrimStringList = new string [toolSwitch.StringList.Length];
for (int i = 0; i < toolSwitch.StringList.Length; ++i)
{
//Make sure the file doesn't contain escaped " (\")
if (toolSwitch.StringList[i].StartsWith("\"") && toolSwitch.StringList[i].EndsWith("\""))
{
ArrTrimStringList[i] = toolSwitch.StringList[i].Substring(1, toolSwitch.StringList[i].Length - 2);
}
else
{
ArrTrimStringList[i] = toolSwitch.StringList[i];
}
}
if (String.IsNullOrEmpty(toolSwitch.Separator))
{
foreach (string fileName in ArrTrimStringList)
{
clb.AppendSwitchIfNotNull(toolSwitch.SwitchValue, fileName);
}
}
else
{
clb.AppendSwitchIfNotNull(toolSwitch.SwitchValue, ArrTrimStringList, toolSwitch.Separator);
}
}
/// <summary>
/// Checks to see if the argument is required and whether an argument exists, and returns the
/// argument or else fallback argument if it exists.
///
/// These are the conditions to look at:
///
/// ArgumentRequired ArgumentParameter FallbackArgumentParameter Result
/// true isSet NA The value in ArgumentParameter gets returned
/// true isNotSet isSet The value in FallbackArgumentParamter gets returned
/// true isNotSet isNotSet An error occurs, as argumentrequired is true
/// false isSet NA The value in ArgumentParameter gets returned
/// false isNotSet isSet The value in FallbackArgumentParameter gets returned
/// false isNotSet isNotSet The empty string is returned, as there are no arguments, and no arguments are required
/// </summary>
/// <param name="toolSwitch"></param>
/// <returns></returns>
protected virtual string GetEffectiveArgumentsValues(ToolSwitch toolSwitch)
{
//if (!toolSwitch.ArgumentRequired && !IsPropertySet(toolSwitch.ArgumentParameter) &&
// !IsPropertySet(toolSwitch.FallbackArgumentParameter))
//{
// return String.Empty;
//}
//// check to see if it has an argument
//if (toolSwitch.ArgumentRequired)
//{
// if (!IsPropertySet(toolSwitch.ArgumentParameter) && !IsPropertySet(toolSwitch.FallbackArgumentParameter))
// {
// throw new ArgumentException(logPrivate.FormatResourceString("ArgumentRequired", toolSwitch.Name));
// }
//}
//// if it gets to here, the argument or the fallback is set
//if (IsPropertySet(toolSwitch.ArgumentParameter))
//{
// return ActiveToolSwitches[toolSwitch.ArgumentParameter].ArgumentValue;
//}
//else
//{
// return ActiveToolSwitches[toolSwitch.FallbackArgumentParameter].ArgumentValue;
//}
return("GetEffectiveArgumentValue not Impl");
}
/// <summary>
/// Appends the directory name to the end of a switch
/// Ensure the name ends with a slash
/// </summary>
/// <remarks>For directory switches (e.g., TrackerLogDirectory), the toolSwitchName (if it exists) is emitted
/// along with the FileName which is ensured to have a trailing slash</remarks>
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
private static void EmitDirectorySwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
if (!String.IsNullOrEmpty(toolSwitch.SwitchValue))
{
//clb.AppendSwitchIfNotNull(toolSwitch.Name + toolSwitch.Separator, EnsureTrailingSlash(toolSwitch.ArgumentValue));
clb.AppendSwitch(toolSwitch.SwitchValue + toolSwitch.Separator);
}
}
protected override void PostProcessSwitchList()
{
ToolExe = InputFiles[0].GetMetadata("CompilerPath");
ActiveToolSwitches["OutputFile"] = new ToolSwitch(ToolSwitchType.File)
{
SwitchValue = "-o ", Value = InputFiles[0].GetMetadata("OutputFile")
};
AdditionalOptions = InputFiles[0].GetMetadata("AdditionalOptions");
}
protected override void OnMouseLeave(EventArgs e)
{
base.OnMouseLeave(e);
if (this.ContextMenuStrip == null || !this.ContextMenuStrip.Visible)
{
this.mouseOn = false;
this.BackColor = Color.White;
this.toolSwitch = ToolSwitch.Null;
}
}
/// <summary>
/// Generates a part of the command line depending on the type
/// </summary>
/// <remarks>Depending on the type of the switch, the switch is emitted with the proper values appended.
/// e.g., File switches will append file names, directory switches will append filenames with "\" on the end</remarks>
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
protected void GenerateCommandsAccordingToType(CommandLineBuilder clb, ToolSwitch toolSwitch, bool bRecursive)
{
// if this property has a parent skip printing it as it was printed as part of the parent prop printing
if (toolSwitch.Parents.Count > 0 && !bRecursive)
{
return;
}
switch (toolSwitch.Type)
{
case ToolSwitchType.Boolean:
EmitBooleanSwitch(clb, toolSwitch);
break;
case ToolSwitchType.String:
EmitStringSwitch(clb, toolSwitch);
break;
case ToolSwitchType.StringArray:
EmitStringArraySwitch(clb, toolSwitch);
break;
case ToolSwitchType.Integer:
EmitIntegerSwitch(clb, toolSwitch);
break;
case ToolSwitchType.File:
EmitFileSwitch(clb, toolSwitch);
break;
case ToolSwitchType.Directory:
EmitDirectorySwitch(clb, toolSwitch);
break;
case ToolSwitchType.ITaskItem:
EmitTaskItemSwitch(clb, toolSwitch);
break;
case ToolSwitchType.ITaskItemArray:
EmitTaskItemArraySwitch(clb, toolSwitch);
break;
case ToolSwitchType.AlwaysAppend:
EmitAlwaysAppendSwitch(clb, toolSwitch);
break;
default:
// should never reach this point - if it does, there's a bug somewhere.
ErrorUtilities.VerifyThrow(false, "InternalError");
break;
}
}
/// <summary>
/// Generates the commands for switches that have integers appended.
/// </summary>
/// <remarks>For integer switches (e.g., WarningLevel), the toolSwitchName is emitted
/// with the appropriate integer appended, as well as any arguments
/// e.g., WarningLevel = "4" will emit /W4</remarks>
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
private void EmitIntegerSwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
if (toolSwitch.IsValid)
{
if (!String.IsNullOrEmpty(toolSwitch.Separator))
{
clb.AppendSwitch(toolSwitch.SwitchValue + toolSwitch.Separator + toolSwitch.Number.ToString() + GetEffectiveArgumentsValues(toolSwitch));
}
else
{
clb.AppendSwitch(toolSwitch.SwitchValue + toolSwitch.Number.ToString() + GetEffectiveArgumentsValues(toolSwitch));
}
}
}
/// <summary>
/// Emit a switch that's an array of task items
/// </summary>
private static void EmitTaskItemArraySwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
if (String.IsNullOrEmpty(toolSwitch.Separator))
{
foreach (ITaskItem itemName in toolSwitch.TaskItemArray)
{
clb.AppendSwitchIfNotNull(toolSwitch.SwitchValue, itemName.ItemSpec);
}
}
else
{
clb.AppendSwitchIfNotNull(toolSwitch.SwitchValue, toolSwitch.TaskItemArray, toolSwitch.Separator);
}
}
protected override void OnContextMenuStripChanged(EventArgs e)
{
base.OnContextMenuStripChanged(e);
if (this.ContextMenuStrip != null)
{
this.ContextMenuStrip.Closed += delegate
{
this.mouseOn = false;
this.BackColor = Color.White;
this.toolSwitch = ToolSwitch.Null;
}
}
;
}
/// <summary>
/// Generates the command line for switches that are reversible
/// </summary>
/// <remarks>A reversible boolean switch will emit a certain switch if set to true, but emit that
/// exact same switch with a flag appended on the end if set to false.
/// e.g., GlobalOptimizations = "true" will emit /Og, and GlobalOptimizations = "false" will emit /Og-</remarks>
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
private void EmitReversibleBooleanSwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
// if the value is set to true, append whatever the TrueSuffix is set to.
// Otherwise, append whatever the FalseSuffix is set to.
if (!String.IsNullOrEmpty(toolSwitch.ReverseSwitchValue))
{
string suffix = (toolSwitch.BooleanValue) ? toolSwitch.TrueSuffix : toolSwitch.FalseSuffix;
StringBuilder val = new StringBuilder(GetEffectiveArgumentsValues(toolSwitch));
val.Insert(0, suffix);
val.Insert(0, toolSwitch.Separator);
val.Insert(0, toolSwitch.TrueSuffix);
val.Insert(0, toolSwitch.ReverseSwitchValue);
clb.AppendSwitch(val.ToString());
}
}
protected override void OnMouseMove(MouseEventArgs e)
{
base.OnMouseMove(e);
if (e.Button == MouseButtons.Left && this.beginDrop)
{
if (Math.Abs(e.X - this.dropX) > 20 || Math.Abs(e.Y - this.dropY) > 20)
{
this.DoDragDrop(this, DragDropEffects.Move);
}
return;
}
if (e.X < this.Height + 2 || e.Y < this.Height - 20 || this.toolList == null || e.X > this.Height + 2 + (20 * this.toolList.Count))//不在工具栏区域
{
if (this.toolSwitch != ToolSwitch.Null)
{
this.toolSwitch = ToolSwitch.Null;
this.Invalidate();
}
return;
}
if (e.X >= this.Height + 2 && e.X <= this.Height + 2 + 13)
{
this.toolSwitch = this.toolList[0];
}
else if (e.X >= this.Height + 2 + 20 && e.X <= this.Height + 2 + 20 + 13)
{
this.toolSwitch = this.toolList[1];
}
else if (e.X >= this.Height + 2 + 40 && e.X <= this.Height + 2 + 40 + 13 && this.toolList.Count > 2)
{
this.toolSwitch = this.toolList[2];
}
else if (e.X > this.Height + 2 + 60 && e.X <= this.Height + 2 + 60 + 13 && this.toolList.Count > 3)
{
this.toolSwitch = this.toolList[3];
}
else
{
this.toolSwitch = ToolSwitch.Null;
}
this.Invalidate();
}
protected string GenerateResponseFileCommandsExceptSwitches(string[] switchesToRemove)
{
this.AddDefaultsToActiveSwitchList();
this.AddFallbacksToActiveSwitchList();
this.PostProcessSwitchList();
CommandLineBuilder clb = new CommandLineBuilder(true);
if (SwitchOrderList != null)
{
foreach (string str in this.SwitchOrderList)
{
if (this.IsPropertySet(str))
{
ToolSwitch property = this.ActiveToolSwitches[str];
if (!this.VerifyDependenciesArePresent(property) || !this.VerifyRequiredArgumentsArePresent(property, false))
{
continue;
}
bool flag = true;
if (switchesToRemove != null)
{
foreach (string str2 in switchesToRemove)
{
if (str.Equals(str2, StringComparison.OrdinalIgnoreCase))
{
flag = false;
break;
}
}
}
if (flag)
{
this.GenerateCommandsAccordingToType(clb, property, false);
}
continue;
}
if (string.Equals(str, "AlwaysAppend", StringComparison.OrdinalIgnoreCase))
{
clb.AppendSwitch(this.AlwaysAppend);
}
}
}
this.BuildAdditionalArgs(clb);
return(clb.ToString());
}
/// <summary>
/// Generates the switches that are nonreversible
/// </summary>
/// <remarks>A boolean switch is emitted if it is set to true. If it set to false, nothing is emitted.
/// e.g. nologo = "true" will emit /Og, but nologo = "false" will emit nothing.</remarks>
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
private void EmitBooleanSwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
if (toolSwitch.BooleanValue)
{
if (!String.IsNullOrEmpty(toolSwitch.SwitchValue))
{
StringBuilder val = new StringBuilder(GetEffectiveArgumentsValues(toolSwitch));
val.Insert(0, toolSwitch.Separator);
val.Insert(0, toolSwitch.TrueSuffix);
val.Insert(0, toolSwitch.SwitchValue);
clb.AppendSwitch(val.ToString());
}
}
else
{
EmitReversibleBooleanSwitch(clb, toolSwitch);
}
}
protected void setPropertyString(string propertyName, string value, string switchName)
{
ActiveToolSwitches.Remove(propertyName);
var s = new ToolSwitch(ToolSwitchType.String)
{
DisplayName = propertyName,
Description = propertyName,
ArgumentRelationList = new ArrayList(),
Value = value,
Required = true,
SwitchValue = switchName,
Separator = " "
};
ActiveToolSwitches.Add(propertyName, s);
AddActiveSwitchToolValue(s);
}
private void setPropertyTaskItem(string propertyName, ITaskItem value, string switchName)
{
ActiveToolSwitches.Remove(propertyName);
var s = new ToolSwitch(ToolSwitchType.ITaskItem)
{
DisplayName = propertyName,
Description = propertyName,
ArgumentRelationList = new ArrayList(),
TaskItem = value,
Required = true,
SwitchValue = switchName,
Separator = " "
};
ActiveToolSwitches.Add(propertyName, s);
AddActiveSwitchToolValue(s);
}
private void SetFileProperty(string name,
string displayName,
string description,
string switchValue,
string value)
{
base.ActiveToolSwitches.Remove(name);
ToolSwitch toolSwitch = new ToolSwitch(ToolSwitchType.File);
toolSwitch.DisplayName = displayName;
toolSwitch.Description = description;
toolSwitch.ArgumentRelationList = new ArrayList();
toolSwitch.SwitchValue = switchValue;
toolSwitch.Name = name;
toolSwitch.Value = value;
base.ActiveToolSwitches.Add(name, toolSwitch);
base.AddActiveSwitchToolValue(toolSwitch);
}
private void SetDirectoryProperty(string name,
string displayName,
string description,
string switchValue,
string value)
{
base.ActiveToolSwitches.Remove(name);
ToolSwitch toolSwitch = new ToolSwitch(ToolSwitchType.Directory);
toolSwitch.DisplayName = displayName;
toolSwitch.Description = description;
toolSwitch.ArgumentRelationList = new ArrayList();
toolSwitch.SwitchValue = switchValue;
toolSwitch.Name = name;
toolSwitch.Value = VCToolTask.EnsureTrailingSlash(value);
base.ActiveToolSwitches.Add(name, toolSwitch);
base.AddActiveSwitchToolValue(toolSwitch);
}
// IToolSwitchProvider
public void SetProperty(string name, string displayName, string description, string switchValue,
DToolSwitchType dtype, object value,
bool multipleValues = false, bool required = false, string separator = null)
{
var type = (ToolSwitchType)dtype;
if (dtype == DToolSwitchType.StringPathArray)
{
type = GetToolSwitchTypeForStringPathArray();
}
base.ActiveToolSwitches.Remove(name);
ToolSwitch toolSwitch = new ToolSwitch(type);
toolSwitch.DisplayName = displayName;
toolSwitch.Description = description;
toolSwitch.SwitchValue = switchValue;
toolSwitch.Name = name;
switch (type)
{
case ToolSwitchType.Boolean: toolSwitch.BooleanValue = (bool)value; break;
case ToolSwitchType.Integer: toolSwitch.Number = (int)value; break;
case ToolSwitchType.File:
case ToolSwitchType.Directory:
case ToolSwitchType.String: toolSwitch.Value = (string)value; break;
case (ToolSwitchType)9 /*ToolSwitchType.StringPathArray*/:
case ToolSwitchType.StringArray: toolSwitch.StringList = (string[])value; break;
case ToolSwitchType.ITaskItem: toolSwitch.TaskItem = (ITaskItem)value; break;
case ToolSwitchType.ITaskItemArray: toolSwitch.TaskItemArray = (ITaskItem[])value; break;
}
toolSwitch.MultipleValues = multipleValues;
toolSwitch.Required = required;
toolSwitch.Separator = separator;
base.ActiveToolSwitches.Add(name, toolSwitch);
AddActiveSwitchToolValue(toolSwitch);
}
private void SetEnumProperty(string name,
string displayName,
string description,
string[][] switchMap,
string value)
{
base.ActiveToolSwitches.Remove(name);
ToolSwitch toolSwitch = new ToolSwitch(ToolSwitchType.String);
toolSwitch.DisplayName = displayName;
toolSwitch.Description = description;
toolSwitch.ArgumentRelationList = new ArrayList();
toolSwitch.SwitchValue = base.ReadSwitchMap(name, switchMap, value);
toolSwitch.Name = name;
toolSwitch.Value = value;
toolSwitch.MultipleValues = true;
base.ActiveToolSwitches.Add(name, toolSwitch);
base.AddActiveSwitchToolValue(toolSwitch);
}
public void ToolInitialization()
{
ToolSwitch DoorOpen = new ToolSwitch()
{
triggerName = "Close",
active = true
};
ToolSwitch DoorClose = new ToolSwitch()
{
triggerName = "Open",
active = false
};
tSwitch = new List <ToolSwitch>
{
DoorOpen,
DoorClose
};
SetStatus(status);
}
// Use this for initialization
public void ToolInitialization()
{
//status = 0;
ToolSwitch lightOn = new ToolSwitch()
{
triggerName = "Light On",
active = true
};
ToolSwitch lightDown = new ToolSwitch()
{
triggerName = "Light Down",
active = false
};
tSwitch = new List <ToolSwitch>
{
lightOn,
lightDown
};
SetStatus(status);
}
/// <summary>
/// Verifies that the dependencies are present, and if the dependencies are present, or if the property
/// doesn't have any dependencies, the switch gets emitted
/// </summary>
/// <param name="property"></param>
/// <returns></returns>
protected virtual bool VerifyDependenciesArePresent(ToolSwitch property)
{
// check the dependency
if (property.Parents.Count > 0)
{
// has a dependency, now check to see whether at least one parent is set
// if it is set, add to the command line
// otherwise, ignore it
bool isSet = false;
foreach (string parentName in property.Parents)
{
isSet = isSet || HasSwitch(parentName);
}
return(isSet);
}
else
{
// no dependencies to account for
return(true);
}
}
/// <summary>
/// Generates the command line for the tool.
/// </summary>
private string GenerateCommands()
{
// the next three methods are overridden by the base class
// here it does nothing unless overridden
AddDefaultsToActiveSwitchList();
AddFallbacksToActiveSwitchList();
PostProcessSwitchList();
#if WHIDBEY_BUILD
CommandLineBuilder commandLineBuilder = new CommandLineBuilder();
#else
CommandLineBuilder commandLineBuilder = new CommandLineBuilder(true /* quote hyphens */);
#endif
// iterates through the list of set toolswitches
foreach (string propertyName in SwitchOrderList)
{
if (IsPropertySet(propertyName))
{
ToolSwitch property = activeToolSwitches[propertyName];
// verify the dependencies
if (VerifyDependenciesArePresent(property) && VerifyRequiredArgumentsArePresent(property, false))
{
GenerateCommandsAccordingToType(commandLineBuilder, property, false);
}
}
else if (String.Equals(propertyName, "AlwaysAppend", StringComparison.OrdinalIgnoreCase))
{
commandLineBuilder.AppendSwitch(AlwaysAppend);
}
}
// additional args should go on the end
BuildAdditionalArgs(commandLineBuilder);
return(commandLineBuilder.ToString());
}
/// <summary>
/// Generates the switches that have filenames attached to the end
/// </summary>
/// <remarks>For file switches (e.g., PrecompiledHeaderFile), the toolSwitchName (if it exists) is emitted
/// along with the FileName which may or may not have quotes</remarks>
/// e.g., PrecompiledHeaderFile = "File" will emit /FpFile
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
private static void EmitFileSwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
if (!String.IsNullOrEmpty(toolSwitch.Value))
{
String str = toolSwitch.Value;
str.Trim();
if (!str.StartsWith("\""))
{
str = "\"" + str;
if (str.EndsWith("\\") && !str.EndsWith("\\\\"))
{
str += "\\\"";
}
else
{
str += "\"";
}
}
//we want quotes always, AppendSwitchIfNotNull will add them on as needed bases
clb.AppendSwitchUnquotedIfNotNull(toolSwitch.SwitchValue + toolSwitch.Separator, str);
}
}
protected override void PostProcessSwitchList()
{
var firstFile = InputFiles.First();
ToolExe = firstFile.GetMetadata("CompilerPath");
ToolSwitch argument;
argument = new ToolSwitch(ToolSwitchType.String)
{
MultipleValues = true
};
if (firstFile.GetMetadata("PointerSize") == "32")
{
argument.SwitchValue = "-32bits";
}
else if (firstFile.GetMetadata("PointerSize") == "64")
{
argument.SwitchValue = "-64bits";
}
ActiveToolSwitches["PointerSize"] = argument;
ActiveToolSwitches["Definitions"] = new ToolSwitch(ToolSwitchType.StringArray)
{
StringList = firstFile.GetMetadata("Definitions").Split(';'), SwitchValue = "-D "
};
ActiveToolSwitches["IncludeFolders"] = new ToolSwitch(ToolSwitchType.StringPathArray)
{
StringList = firstFile.GetMetadata("IncludeFolders").Split(';'), SwitchValue = "-I "
};
argument = new ToolSwitch(ToolSwitchType.String)
{
MultipleValues = true
};
if (firstFile.GetMetadata("CallTrace") == "SingleThreaded")
{
argument.SwitchValue = "-call_trace 1";
}
else if (firstFile.GetMetadata("CallTrace") == "MSVC")
{
argument.SwitchValue = "-call_trace 2";
}
ActiveToolSwitches["CallTrace"] = argument;
if (firstFile.GetMetadata("ShowMemoryUsage") != "true")
{
ActiveToolSwitches.Remove("ShowMemoryUsage");
}
else
{
ActiveToolSwitches["ShowMemoryUsage"] = new ToolSwitch(ToolSwitchType.String)
{
MultipleValues = true, SwitchValue = "-debug_memory"
}
};
ActiveToolSwitches["AdditionalDependencies"] = new ToolSwitch(ToolSwitchType.StringArray)
{
StringList = firstFile.GetMetadata("AdditionalDependencies").Split(';'), SwitchValue = "-linker_option /DEFAULTLIB:"
};
if (firstFile.GetMetadata("DisableDebugInfo") != "true")
{
ActiveToolSwitches.Remove("DisableDebugInfo");
}
else
{
ActiveToolSwitches["DisableDebugInfo"] = new ToolSwitch(ToolSwitchType.String)
{
MultipleValues = true, SwitchValue = "-ndebug"
}
};
ActiveToolSwitches["OutputFile"] = new ToolSwitch(ToolSwitchType.File)
{
SwitchValue = "-o ", Value = firstFile.GetMetadata("OutputFile")
};
if (firstFile.GetMetadata("PartialCompilation") != "true")
{
ActiveToolSwitches.Remove("PartialCompilation");
}
else
{
ActiveToolSwitches["PartialCompilation"] = new ToolSwitch(ToolSwitchType.String)
{
MultipleValues = true, SwitchValue = "-part"
}
};
if (firstFile.GetMetadata("RecursionDepthLimit") == "")
{
ActiveToolSwitches.Remove("RecursionDepthLimit");
}
else
{
ActiveToolSwitches["RecursionDepthLimit"] = new ToolSwitch(ToolSwitchType.Integer)
{
IsValid = true, Number = int.Parse(firstFile.GetMetadata("RecursionDepthLimit")), SwitchValue = "-recursion_depth_limit "
}
};
if (firstFile.GetMetadata("StaticLoopLimit") == "")
{
ActiveToolSwitches.Remove("StaticLoopLimit");
}
else
{
ActiveToolSwitches["StaticLoopLimit"] = new ToolSwitch(ToolSwitchType.Integer)
{
IsValid = true, Number = int.Parse(firstFile.GetMetadata("StaticLoopLimit")), SwitchValue = "-static_loop_length_limit "
}
};
AdditionalOptions = firstFile.GetMetadata("AdditionalOptions");
}
}
}
/// <summary>
/// Verifies that the required args are present. This function throws if we have missing required args
/// </summary>
/// <param name="property"></param>
/// <returns></returns>
protected virtual bool VerifyRequiredArgumentsArePresent(ToolSwitch property, bool bThrowOnError)
{
return true;
}
/// <summary>
/// Emit a switch that's always appended
/// </summary>
private static void EmitAlwaysAppendSwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
clb.AppendSwitch(toolSwitch.Name);
}
/// <summary>
/// Verifies that the dependencies are present, and if the dependencies are present, or if the property
/// doesn't have any dependencies, the switch gets emitted
/// </summary>
/// <param name="property"></param>
/// <returns></returns>
protected virtual bool VerifyDependenciesArePresent(ToolSwitch property)
{
// check the dependency
if (property.Parents.Count > 0)
{
// has a dependency, now check to see whether at least one parent is set
// if it is set, add to the command line
// otherwise, ignore it
bool isSet = false;
foreach (string parentName in property.Parents)
{
isSet = isSet || HasSwitch(parentName);
}
return isSet;
}
else
{
// no dependencies to account for
return true;
}
}
/// <summary>
/// Emit a switch that's a scalar task item
/// </summary>
private static void EmitTaskItemSwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
if (!String.IsNullOrEmpty(toolSwitch.Name))
{
clb.AppendSwitch(toolSwitch.Name + toolSwitch.Separator);
}
}
/// <summary>
/// Generates the switches that are nonreversible
/// </summary>
/// <remarks>A boolean switch is emitted if it is set to true. If it set to false, nothing is emitted.
/// e.g. nologo = "true" will emit /Og, but nologo = "false" will emit nothing.</remarks>
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
private void EmitBooleanSwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
if (toolSwitch.BooleanValue)
{
if (!String.IsNullOrEmpty(toolSwitch.SwitchValue))
{
StringBuilder val = new StringBuilder(GetEffectiveArgumentsValues(toolSwitch));
val.Insert(0, toolSwitch.Separator);
val.Insert(0, toolSwitch.TrueSuffix);
val.Insert(0, toolSwitch.SwitchValue);
clb.AppendSwitch(val.ToString());
}
}
else
EmitReversibleBooleanSwitch(clb, toolSwitch);
}
/// <summary>
/// Generates the switches for switches that either have literal strings appended, or have
/// different switches based on what the property is set to.
/// </summary>
/// <remarks>The string switch emits a switch that depends on what the parameter is set to, with and
/// arguments
/// e.g., Optimization = "Full" will emit /Ox, whereas Optimization = "Disabled" will emit /Od</remarks>
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
private void EmitStringSwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
String strSwitch = String.Empty;
strSwitch += toolSwitch.SwitchValue + toolSwitch.Separator;
StringBuilder val = new StringBuilder(GetEffectiveArgumentsValues(toolSwitch));
String str = toolSwitch.Value;
if (!toolSwitch.MultiValues)
{
str.Trim();
if (!str.StartsWith("\""))
{
str = "\"" + str;
if (str.EndsWith("\\") && !str.EndsWith("\\\\"))
str += "\\\"";
else
str += "\"";
}
val.Insert(0, str);
}
if ((strSwitch.Length == 0) && (val.ToString().Length == 0))
return;
clb.AppendSwitchUnquotedIfNotNull(strSwitch, val.ToString());
}
/// <summary>
/// Verifies that the required args are present. This function throws if we have missing required args
/// </summary>
/// <param name="property"></param>
/// <returns></returns>
protected virtual bool VerifyRequiredArgumentsArePresent(ToolSwitch property, bool bThrowOnError)
{
return(true);
}
/// <summary>
/// Emit a switch that's always appended
/// </summary>
private static void EmitAlwaysAppendSwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
clb.AppendSwitch(toolSwitch.Name);
}
/// <summary>
/// Generates the switches that have filenames attached to the end
/// </summary>
/// <remarks>For file switches (e.g., PrecompiledHeaderFile), the toolSwitchName (if it exists) is emitted
/// along with the FileName which may or may not have quotes</remarks>
/// e.g., PrecompiledHeaderFile = "File" will emit /FpFile
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
private static void EmitFileSwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
if (!String.IsNullOrEmpty(toolSwitch.Value))
{
String str = toolSwitch.Value;
str.Trim();
if (!str.StartsWith("\""))
{
str = "\"" + str;
if (str.EndsWith("\\") && !str.EndsWith("\\\\"))
str += "\\\"";
else
str += "\"";
}
//we want quotes always, AppendSwitchIfNotNull will add them on as needed bases
clb.AppendSwitchUnquotedIfNotNull(toolSwitch.SwitchValue + toolSwitch.Separator, str);
}
}
/// <summary>
/// Appends the directory name to the end of a switch
/// Ensure the name ends with a slash
/// </summary>
/// <remarks>For directory switches (e.g., TrackerLogDirectory), the toolSwitchName (if it exists) is emitted
/// along with the FileName which is ensured to have a trailing slash</remarks>
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
private static void EmitDirectorySwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
if (!String.IsNullOrEmpty(toolSwitch.SwitchValue))
{
//clb.AppendSwitchIfNotNull(toolSwitch.Name + toolSwitch.Separator, EnsureTrailingSlash(toolSwitch.ArgumentValue));
clb.AppendSwitch(toolSwitch.SwitchValue + toolSwitch.Separator);
}
}
/// <summary>
/// Checks to see if the argument is required and whether an argument exists, and returns the
/// argument or else fallback argument if it exists.
///
/// These are the conditions to look at:
///
/// ArgumentRequired ArgumentParameter FallbackArgumentParameter Result
/// true isSet NA The value in ArgumentParameter gets returned
/// true isNotSet isSet The value in FallbackArgumentParamter gets returned
/// true isNotSet isNotSet An error occurs, as argumentrequired is true
/// false isSet NA The value in ArgumentParameter gets returned
/// false isNotSet isSet The value in FallbackArgumentParameter gets returned
/// false isNotSet isNotSet The empty string is returned, as there are no arguments, and no arguments are required
/// </summary>
/// <param name="toolSwitch"></param>
/// <returns></returns>
protected virtual string GetEffectiveArgumentsValues(ToolSwitch toolSwitch)
{
//if (!toolSwitch.ArgumentRequired && !IsPropertySet(toolSwitch.ArgumentParameter) &&
// !IsPropertySet(toolSwitch.FallbackArgumentParameter))
//{
// return String.Empty;
//}
//// check to see if it has an argument
//if (toolSwitch.ArgumentRequired)
//{
// if (!IsPropertySet(toolSwitch.ArgumentParameter) && !IsPropertySet(toolSwitch.FallbackArgumentParameter))
// {
// throw new ArgumentException(logPrivate.FormatResourceString("ArgumentRequired", toolSwitch.Name));
// }
//}
//// if it gets to here, the argument or the fallback is set
//if (IsPropertySet(toolSwitch.ArgumentParameter))
//{
// return ActiveToolSwitches[toolSwitch.ArgumentParameter].ArgumentValue;
//}
//else
//{
// return ActiveToolSwitches[toolSwitch.FallbackArgumentParameter].ArgumentValue;
//}
return "GetEffectiveArgumentValue not Impl";
}
/// <summary>
/// Generates the command line for switches that are reversible
/// </summary>
/// <remarks>A reversible boolean switch will emit a certain switch if set to true, but emit that
/// exact same switch with a flag appended on the end if set to false.
/// e.g., GlobalOptimizations = "true" will emit /Og, and GlobalOptimizations = "false" will emit /Og-</remarks>
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
private void EmitReversibleBooleanSwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
// if the value is set to true, append whatever the TrueSuffix is set to.
// Otherwise, append whatever the FalseSuffix is set to.
if (!String.IsNullOrEmpty(toolSwitch.ReverseSwitchValue))
{
string suffix = (toolSwitch.BooleanValue) ? toolSwitch.TrueSuffix : toolSwitch.FalseSuffix;
StringBuilder val = new StringBuilder(GetEffectiveArgumentsValues(toolSwitch));
val.Insert(0, suffix);
val.Insert(0, toolSwitch.Separator);
val.Insert(0, toolSwitch.TrueSuffix);
val.Insert(0, toolSwitch.ReverseSwitchValue);
clb.AppendSwitch(val.ToString());
}
}
/// <summary>
/// Generates the commands for switches that have integers appended.
/// </summary>
/// <remarks>For integer switches (e.g., WarningLevel), the toolSwitchName is emitted
/// with the appropriate integer appended, as well as any arguments
/// e.g., WarningLevel = "4" will emit /W4</remarks>
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
private void EmitIntegerSwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
if (toolSwitch.IsValid)
{
if (!String.IsNullOrEmpty(toolSwitch.Separator))
{
clb.AppendSwitch(toolSwitch.SwitchValue + toolSwitch.Separator + toolSwitch.Number.ToString() + GetEffectiveArgumentsValues(toolSwitch));
}
else
{
clb.AppendSwitch(toolSwitch.SwitchValue + toolSwitch.Number.ToString() + GetEffectiveArgumentsValues(toolSwitch));
}
}
}
/// <summary>
/// Emit a switch that's an array of task items
/// </summary>
private static void EmitTaskItemArraySwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
if (String.IsNullOrEmpty(toolSwitch.Separator))
{
foreach (ITaskItem itemName in toolSwitch.TaskItemArray)
{
clb.AppendSwitchIfNotNull(toolSwitch.SwitchValue, itemName.ItemSpec);
}
}
else
{
clb.AppendSwitchIfNotNull(toolSwitch.SwitchValue, toolSwitch.TaskItemArray, toolSwitch.Separator);
}
}
/// <summary>
/// Generates a part of the command line depending on the type
/// </summary>
/// <remarks>Depending on the type of the switch, the switch is emitted with the proper values appended.
/// e.g., File switches will append file names, directory switches will append filenames with "\" on the end</remarks>
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
protected void GenerateCommandsAccordingToType(CommandLineBuilder clb, ToolSwitch toolSwitch, bool bRecursive)
{
// if this property has a parent skip printing it as it was printed as part of the parent prop printing
if (toolSwitch.Parents.Count > 0 && !bRecursive)
return;
switch (toolSwitch.Type)
{
case ToolSwitchType.Boolean:
EmitBooleanSwitch(clb, toolSwitch);
break;
case ToolSwitchType.String:
EmitStringSwitch(clb, toolSwitch);
break;
case ToolSwitchType.StringArray:
EmitStringArraySwitch(clb, toolSwitch);
break;
case ToolSwitchType.Integer:
EmitIntegerSwitch(clb, toolSwitch);
break;
case ToolSwitchType.File:
EmitFileSwitch(clb, toolSwitch);
break;
case ToolSwitchType.Directory:
EmitDirectorySwitch(clb, toolSwitch);
break;
case ToolSwitchType.ITaskItem:
EmitTaskItemSwitch(clb, toolSwitch);
break;
case ToolSwitchType.ITaskItemArray:
EmitTaskItemArraySwitch(clb, toolSwitch);
break;
case ToolSwitchType.AlwaysAppend:
EmitAlwaysAppendSwitch(clb, toolSwitch);
break;
default:
// should never reach this point - if it does, there's a bug somewhere.
ErrorUtilities.VerifyThrow(false, "InternalError");
break;
}
}
/// <summary>
/// Generates the commands for the switches that may have an array of arguments
/// The switch may be empty.
/// </summary>
/// <remarks>For stringarray switches (e.g., Sources), the toolSwitchName (if it exists) is emitted
/// along with each and every one of the file names separately (if no separator is included), or with all of the
/// file names separated by the separator.
/// e.g., AdditionalIncludeDirectores = "@(Files)" where Files has File1, File2, and File3, the switch
/// /IFile1 /IFile2 /IFile3 or the switch /IFile1;File2;File3 is emitted (the latter case has a separator
/// ";" specified)</remarks>
/// <param name="clb"></param>
/// <param name="toolSwitch"></param>
private static void EmitStringArraySwitch(CommandLineBuilder clb, ToolSwitch toolSwitch)
{
string[] ArrTrimStringList = new string [toolSwitch.StringList.Length];
for (int i=0; i<toolSwitch.StringList.Length; ++i)
{
//Make sure the file doesn't contain escaped " (\")
if (toolSwitch.StringList[i].StartsWith("\"") && toolSwitch.StringList[i].EndsWith("\""))
{
ArrTrimStringList[i] = toolSwitch.StringList[i].Substring(1, toolSwitch.StringList[i].Length - 2);
}
else
{
ArrTrimStringList[i] = toolSwitch.StringList[i];
}
}
if (String.IsNullOrEmpty(toolSwitch.Separator))
{
foreach (string fileName in ArrTrimStringList)
{
clb.AppendSwitchIfNotNull(toolSwitch.SwitchValue, fileName);
}
}
else
{
clb.AppendSwitchIfNotNull(toolSwitch.SwitchValue, ArrTrimStringList, toolSwitch.Separator);
}
}
