/// <summary>
/// Get log details of Network Switch
/// </summary>
/// <returns>Log Data of Network Switch</returns>
public string GetLog()
{
string logData = string.Empty;
using (TelnetIpc telnet = new TelnetIpc(IPAddress.ToString(), 23))
{
try
{
telnet.Connect();
telnet.SendLine(" ");
Thread.Sleep(1000);
telnet.SendLine("show log -r");
Thread.Sleep(3000);
string data = telnet.ReceiveUntilMatch("$");
while (data.Contains("-- MORE --"))
{
logData += data;
telnet.SendLine(" ");
Thread.Sleep(3000);
data = telnet.ReceiveUntilMatch("$");
}
logData += data;
}
catch (Exception ex)
{
Logger.LogInfo(ex.Message);
}
}
return(logData);
}
/// <summary>
/// Get the SwitchType using IP Address of the Network Switch
/// </summary>
/// <param name="ipAddress">IP Address of Network Switch</param>
/// <returns><see cref="SwitchType"/></returns>
private static SwitchType GetSwitchType(IPAddress ipAddress)
{
TelnetIpc telnet = new TelnetIpc(ipAddress.ToString(), 23);
SwitchType switchType = SwitchType.None;
try
{
telnet.Connect();
telnet.SendLine(" ");
Thread.Sleep(1000);
// This command is tested currently only for HP ProCurve switch, need to check for other switches how it behaves
telnet.SendLine("show config");
Thread.Sleep(3000);
string data = telnet.ReceiveUntilMatch("$");
// HP manufactured switch can contain any of the strings.
// ProCurve, Hewlett-Packard, Hewlett Packard
if (data.Contains("ProCurve", StringComparison.CurrentCultureIgnoreCase) || data.Contains("Hewlett-Packard", StringComparison.CurrentCultureIgnoreCase) || data.Contains("Hewlett Packard", StringComparison.CurrentCultureIgnoreCase))
{
switchType = SwitchType.HPProCurve;
}
}
finally
{
telnet.Dispose();
Thread.Sleep(1000);
}
return(switchType);
}
/// <summary>
/// Get the RouterType using IP Address of the Router.
/// </summary>
/// <param name="ipAddress">IP Address of the Router.</param>
/// <param name="userName">User name credentials to the router.</param>
/// <param name="password">Password credentials to the router.</param>
/// <returns><see cref="RouterType"/></returns>
private static RouterType GetRouterType(IPAddress ipAddress, string userName, string password)
{
TelnetIpc telnet = new TelnetIpc(ipAddress.ToString(), 23);
RouterType routerType = RouterType.None;
try
{
telnet.Connect();
telnet.SendLine(" ");
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(userName);
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(password);
Thread.Sleep(TimeSpan.FromSeconds(20));
string data = telnet.ReceiveUntilMatch("$");
// HP manufactured router can contain any of the strings.
// ProCurve, Hewlett-Packard, Hewlett Packard
if (data.Contains("ProCurve", StringComparison.CurrentCultureIgnoreCase) || data.Contains("Hewlett-Packard", StringComparison.CurrentCultureIgnoreCase) || data.Contains("Hewlett Packard", StringComparison.CurrentCultureIgnoreCase))
{
routerType = RouterType.HP;
}
}
finally
{
telnet.Dispose();
Thread.Sleep(1000);
}
return(routerType);
}
/// <summary>
/// Get the List of VLAN's configured on Network Switch
/// </summary>
/// <returns>List of <see cref="VirtualLAN"/></returns>
public Collection <VirtualLAN> GetAvailableVirtualLans()
{
Collection <VirtualLAN> vlans = new Collection <VirtualLAN>();
string ipData = string.Empty;
string identifierData = string.Empty;
try
{
using (TelnetIpc telnet = new TelnetIpc(IPAddress.ToString(), 23))
{
telnet.Connect();
telnet.SendLine(" ");
Thread.Sleep(1000);
telnet.SendLine("show ip");
Thread.Sleep(3000);
ipData = telnet.ReceiveUntilMatch("$");
telnet.SendLine(" ");
telnet.SendLine("show vlan");
Thread.Sleep(3000);
// Gets the identifier data which contains VLAN numbers.
identifierData = telnet.ReceiveUntilMatch("$");
}
// Once the connection is disposed, a wait is required to make sure that the connection is closed
Thread.Sleep(TimeSpan.FromMilliseconds(1000));
vlans = GetVLans(ipData, identifierData);
}
catch (Exception ex)
{
Logger.LogInfo(ex.Message);
}
return(vlans);
}
/// <summary>
/// Set the link speed of the port to the specified value.
/// </summary>
/// <param name="portNumber">The port number to be configured.</param>
/// <param name="linkSpeed"><see cref="LinkSpeed"/></param>
/// <returns>True if the link speed is set, else false.</returns>
public bool SetLinkSpeed(int portNumber, LinkSpeed linkSpeed)
{
try
{
Logger.LogInfo("Setting link speed: {0} on port number: {1}".FormatWith(Enum <LinkSpeed> .Value(linkSpeed), portNumber));
using (TelnetIpc telnet = new TelnetIpc(IPAddress.ToString(), 23))
{
telnet.Connect();
telnet.SendLine("/n");
telnet.SendLine("conf t");
telnet.SendLine("interface ethernet {0} speed-duplex {1}".FormatWith(portNumber, Enum <LinkSpeed> .Value(linkSpeed)));
Thread.Sleep(TimeSpan.FromSeconds(20));
}
Thread.Sleep(TimeSpan.FromMinutes(1));
// Link Speed validation is removed as the switch link speed changes w.r.t printer connection on the port.
Logger.LogInfo("Successfully set link speed: {0} on port number: {1}".FormatWith(Enum <LinkSpeed> .Value(linkSpeed), portNumber));
return(true);
}
catch (SocketException ex)
{
Logger.LogInfo("Failed to set link speed: {0} on port number: {1}".FormatWith(Enum <LinkSpeed> .Value(linkSpeed), portNumber));
Logger.LogInfo(ex.Message);
return(false);
}
catch (Exception ex)
{
Logger.LogInfo("Failed to set link speed: {0} on port number: {1}".FormatWith(Enum <LinkSpeed> .Value(linkSpeed), portNumber));
Logger.LogInfo(ex.Message);
return(false);
}
}
/// <summary>
/// Enables 802.1X Authentication for the switch port
/// </summary>
/// <param name="portNumber">Port to be enabled</param>
/// <param name="timeOut">time to wait after the telnet connection is disposed</param>
public void EnableAuthenticatorPort(int portNumber, int timeOut = 1000)
{
Logger.LogInfo("Enabling authentication on port: {0}.".FormatWith(portNumber));
using (TelnetIpc telnet = new TelnetIpc(IPAddress.ToString(), 23))
{
try
{
telnet.Connect();
telnet.SendLine("/n");
telnet.SendLine("conf t");
telnet.SendLine(string.Format(CultureInfo.CurrentCulture, "aaa port-access authenticator {0}", portNumber));
Thread.Sleep(1000);
telnet.SendLine("wr mem");
}
catch (Exception ex)
{
Logger.LogInfo(ex.Message);
throw;
}
}
// Once the connection is disposed, a wait is required to make sure that the connection is closed
Thread.Sleep(TimeSpan.FromMilliseconds(1000));
}
/// <summary>
/// Gets all the radius servers configured on the switch.
/// </summary>
/// <returns></returns>
public Collection <IPAddress> GetRadiusServers()
{
string configData = string.Empty;
using (TelnetIpc telnet = new TelnetIpc(IPAddress.ToString(), 23))
{
telnet.Connect();
telnet.SendLine("/n");
telnet.SendLine("show run");
Thread.Sleep(TimeSpan.FromSeconds(10));
configData = telnet.ReceiveUntilMatch("$");
string data = configData;
while (data.Contains("more", StringComparison.CurrentCultureIgnoreCase))
{
telnet.SendLine(" ");
Thread.Sleep(TimeSpan.FromSeconds(10));
data = telnet.ReceiveUntilMatch("$");
configData += data;
}
configData = configData.Replace(controlCharacters, string.Empty).Replace("/r", string.Empty).Trim();
}
// Wait time for the telnet connection to dispose
Thread.Sleep(TimeSpan.FromSeconds(30));
string[] radiusServerData = Array.FindAll(configData.Split(new char[] { '\n' }, StringSplitOptions.RemoveEmptyEntries), x => x.Contains("radius-server", StringComparison.CurrentCultureIgnoreCase));
Regex ipAddressRegex = new Regex(@"\b\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}\b");
return(new Collection <IPAddress>(radiusServerData.Select(x => IPAddress.Parse(ipAddressRegex.Match(x).Value)).ToArray()));
}
/// <summary>
/// Gets the configured pots for the VLAN number.
/// </summary>
/// <param name="vlanIdentifier">The VLAN number.</param>
/// <returns>The VLAN ports configured.</returns>
public Collection <int> GetVlanPorts(int vlanIdentifier)
{
Collection <int> vlans = new Collection <int>();
string portData = string.Empty;
try
{
using (TelnetIpc telnet = new TelnetIpc(IPAddress.ToString(), 23))
{
telnet.Connect();
telnet.SendLine(" ");
Thread.Sleep(1000);
telnet.SendLine("show vlan {0}".FormatWith(vlanIdentifier));
Thread.Sleep(4000);
portData = telnet.ReceiveUntilMatch("$");
}
// Once the connection is disposed, a wait is required to make sure that the connection is closed
Thread.Sleep(TimeSpan.FromMilliseconds(1000));
portData = portData.Replace("\r", string.Empty);
string[] lines = portData.Split(new char[] { '\n' }, StringSplitOptions.RemoveEmptyEntries);
// Position at the VLAN Port Information table in the array
int position = Array.FindIndex(lines, x => x.Contains("Port Information"));
// If position is -1, no VLANs are configured on the switch.
if (position == -1)
{
Logger.LogInfo("Configured port information is not available on the switch for VLAN : {0}.".FormatWith(vlanIdentifier));
return(vlans);
}
for (++position; position < lines.Count(); position++)
{
if (lines[position].Contains("Untagged"))
{
vlans.Add(Convert.ToInt32(lines[position].Split(new char[] { ' ' }, StringSplitOptions.RemoveEmptyEntries)[0], CultureInfo.CurrentCulture));
}
}
return(vlans);
}
catch (SocketException ex)
{
Logger.LogInfo(ex.Message);
return(vlans);
}
}
/// <summary>
/// Configure radius server on the switch.
/// </summary>
/// <param name="radiusServer">IP address of the radius server.</param>
/// <param name="sharedSecret">Shared secret for the radius server configuration.</param>
/// <returns>True if the configuration is successful, else false.</returns>
public bool ConfigureRadiusServer(IPAddress radiusServer, string sharedSecret)
{
try
{
using (TelnetIpc telnet = new TelnetIpc(IPAddress.ToString(), 23))
{
telnet.Connect();
telnet.SendLine("/n");
telnet.SendLine("conf t");
telnet.SendLine("aaa authentication port-access eap-radius");
telnet.SendLine("radius-server host {0} key {1}".FormatWith(radiusServer.ToString(), sharedSecret));
Thread.Sleep(TimeSpan.FromSeconds(10));
telnet.SendLine("aaa port-access authenticator active");
Thread.Sleep(TimeSpan.FromSeconds(10));
}
Thread.Sleep(TimeSpan.FromSeconds(20));
if (GetRadiusServers().Contains(radiusServer))
{
Logger.LogInfo("Successfully configured the radius server: {0} on the switch.".FormatWith(radiusServer));
return(true);
}
else
{
Logger.LogInfo("Failed to configure the radius server: {0} on the switch.".FormatWith(radiusServer));
return(false);
}
}
catch (SocketException ex)
{
Logger.LogInfo("Failed to configure the radius server: {0} on the switch.".FormatWith(radiusServer));
Logger.LogInfo(ex.Message);
return(false);
}
catch (Exception ex)
{
Logger.LogInfo("Failed to configure the radius server: {0} on the switch.".FormatWith(radiusServer));
Logger.LogInfo(ex.Message);
return(false);
}
}
/// <summary>
/// DeConfigure/Remove radius server details from the switch.
/// </summary>
/// <returns>True if the configuration is successful, else false.</returns>
public bool DeconfigureRadisuServer(IPAddress radiusServer)
{
try
{
using (TelnetIpc telnet = new TelnetIpc(IPAddress.ToString(), 23))
{
telnet.Connect();
telnet.SendLine("/n");
telnet.SendLine("conf t");
telnet.SendLine("no radius-server host {0}".FormatWith(radiusServer.ToString()));
Thread.Sleep(TimeSpan.FromSeconds(10));
}
Thread.Sleep(TimeSpan.FromSeconds(20));
if (!GetRadiusServers().Contains(radiusServer))
{
Logger.LogInfo("Successfully removed the radius server: {0} on the switch.".FormatWith(radiusServer));
return(true);
}
else
{
Logger.LogInfo("Failed to remove the radius server: {0} on the switch.".FormatWith(radiusServer));
return(false);
}
}
catch (SocketException ex)
{
Logger.LogInfo("Failed to remove the radius server: {0} on the switch.".FormatWith(radiusServer));
Logger.LogInfo(ex.Message);
return(false);
}
catch (Exception ex)
{
Logger.LogInfo("Failed to remove the radius server: {0} on the switch.".FormatWith(radiusServer));
Logger.LogInfo(ex.Message);
return(false);
}
}
/// <summary>
/// Changes the network of a port by keeping the port in the destination VLAN.
/// </summary>
/// <param name="portNumber">Port number to be changed to destination VLAN.</param>
/// <param name="destinationVlanIdentifer">The destination VLAN identifier.</param>
/// <returns>true if successfully changed the port to the specified VLAN, else false</returns>
public bool ChangeVirtualLan(int portNumber, int destinationVlanIdentifer)
{
try
{
using (TelnetIpc telnet = new TelnetIpc(IPAddress.ToString(), 23))
{
telnet.Connect();
telnet.SendLine("/n");
telnet.SendLine("conf t");
telnet.SendLine("vlan {0}".FormatWith(destinationVlanIdentifer));
Thread.Sleep(TimeSpan.FromMilliseconds(1000));
telnet.SendLine("untagged {0}".FormatWith(portNumber));
Thread.Sleep(TimeSpan.FromMilliseconds(1000));
telnet.SendLine("wr mem");
Thread.Sleep(TimeSpan.FromMilliseconds(1000));
}
// Once the connection is disposed, a wait is required to make sure that the connection is closed
Thread.Sleep(TimeSpan.FromMilliseconds(1000));
// Validate the port number in destination VLAN
if (GetVlanPorts(destinationVlanIdentifer).Contains(portNumber))
{
Logger.LogInfo("Successfully changed the network of port number {0} to vlan {1}.".FormatWith(portNumber, destinationVlanIdentifer));
return(true);
}
else
{
Logger.LogInfo("Failed to change the network of port number {0} to vlan {1}.".FormatWith(portNumber, destinationVlanIdentifer));
return(false);
}
}
catch (SocketException ex)
{
Logger.LogInfo("Socket Exception occurred: {0}.".FormatWith(ex.Message));
return(false);
}
}
/// <summary>
/// Gets the details of a virtual LAN.
/// </summary>
/// <param name="routerVlanId">The virtual LAN id.</param>
/// <returns><see cref="RouterVirtualLAN"/></returns>
public RouterVirtualLAN GetVirtualLanDetails(int routerVlanId)
{
string vlanData = string.Empty;
RouterVirtualLAN routerVlan = RouterVlans.Where(x => x.Identifier.Equals(routerVlanId)).FirstOrDefault();
using (TelnetIpc telnet = new TelnetIpc(_adress.ToString(), 23))
{
telnet.Connect();
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(_userName);
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(_password);
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine("en");
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine("show run vlan {0}".FormatWith(routerVlanId));
Thread.Sleep(TimeSpan.FromSeconds(10));
vlanData = telnet.ReceiveUntilMatch("$");
while (vlanData.Contains("more", StringComparison.CurrentCultureIgnoreCase))
{
vlanData = vlanData.Remove(vlanData.IndexOf("-- more", StringComparison.CurrentCultureIgnoreCase));
telnet.SendLine(" ");
Thread.Sleep(TimeSpan.FromSeconds(10));
vlanData += telnet.ReceiveUntilMatch("$");
}
vlanData = vlanData.Replace(controlCharacters, string.Empty).Replace("/r", string.Empty).Trim();
}
GetVlanDetails(vlanData, ref routerVlan);
return(routerVlan);
}
/// <summary>
/// Enable/ Disable a Network Switch Port
/// </summary>
/// <param name="portNo">Port Number of Network Switch</param>
/// <param name="enablePort">true to Enable, false to Disable</param>
/// <returns>true if successful, false otherwise</returns>
private bool EnablePort(int portNo, bool enablePort)
{
bool result = false;
string enable = (enablePort.Equals(true) ? " enable" : " disable");
Logger.LogInfo("{0} port: {1}.".FormatWith(enable, portNo));
string[] commands = { " ", "configure",
"interface ethernet " + portNo + enable };
using (TelnetIpc telnet = new TelnetIpc(IPAddress.ToString(), 23))
{
try
{
telnet.Connect();
for (int i = 0; i < commands.Length; i++)
{
telnet.SendLine(commands[i]);
Thread.Sleep(1000);
}
result = IsPortDisabled(portNo);
}
catch (Exception ex)
{
Logger.LogInfo(ex.Message);
return(false);
}
}
// Once the connection is disposed, a wait is required to make sure that the connection is closed
Thread.Sleep(TimeSpan.FromMilliseconds(1000));
result = enablePort.Equals(false) ? result : !result;
if (result)
{
Logger.LogInfo("Successfully {0}d port: {1}.".FormatWith(enable, portNo));
}
else
{
Logger.LogInfo("Failed to {0} port: {1}.".FormatWith(enable, portNo));
}
return(result);
}
/// <summary>
/// Gets the available virtual Lans
/// </summary>
private void GetRouterVirtualLans()
{
string ipData = string.Empty;
string identifierData = string.Empty;
using (TelnetIpc telnet = new TelnetIpc(_adress.ToString(), 23))
{
telnet.Connect();
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(_userName);
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(_password);
Thread.Sleep(TimeSpan.FromSeconds(5));
// Get the VLAN IP details
telnet.SendLine("show ip");
Thread.Sleep(TimeSpan.FromSeconds(10));
string data = string.Empty;
data = telnet.ReceiveUntilMatch("$");
while (data.Contains("more", StringComparison.CurrentCultureIgnoreCase))
{
data = data.Remove(data.IndexOf("-- more", StringComparison.CurrentCultureIgnoreCase));
telnet.SendLine(" ");
Thread.Sleep(TimeSpan.FromSeconds(10));
data += telnet.ReceiveUntilMatch("$");
}
ipData = data.Replace(controlCharacters, string.Empty);;
data = string.Empty;
// Gets the Virtual LAN Id details
telnet.SendLine("show vlan");
Thread.Sleep(TimeSpan.FromSeconds(10));
data = telnet.ReceiveUntilMatch("$");
while (data.Contains("more", StringComparison.CurrentCultureIgnoreCase))
{
data = data.Remove(data.IndexOf("-- more", StringComparison.CurrentCultureIgnoreCase));
telnet.SendLine(" ");
Thread.Sleep(TimeSpan.FromSeconds(10));
data += telnet.ReceiveUntilMatch("$");
}
identifierData = data.Replace(controlCharacters, string.Empty);
}
Thread.Sleep(TimeSpan.FromSeconds(30));
_routerVlans = GetVlanDetails(ipData, identifierData);
}
/// <summary>
/// Set the Lease time.
/// </summary>
/// <param name="routerVlanId">The virtual LAN id.</param>
/// <param name="validLifeTime"><see cref="LeaseTime"/></param>
/// <param name="preferredLifeTime">The lease time.</param>
/// <returns>True if the lease time is set, else false.</returns>
public bool SetLeaseTime(int routerVlanId, TimeSpan validLifeTime, TimeSpan preferredLifeTime)
{
RouterVirtualLAN routerVlan = GetVirtualLanDetails(routerVlanId);
Collection <RouterIPv6Details> ipv6Details = routerVlan.IPv6Details;
string setLifeTime = "ipv6 nd ra prefix {0}/{1} {2} {3}\n";
string clearLifeTime = "no ipv6 nd ra prefix {0}/{1}\n";
string command = string.Empty;
if (validLifeTime.TotalSeconds < preferredLifeTime.TotalSeconds)
{
Logger.LogInfo("Valid life time should be more than preferred life time.");
return(false);
}
foreach (RouterIPv6Details v6Details in ipv6Details)
{
command += clearLifeTime.FormatWith(v6Details.AddressPrefix, v6Details.PrefixLength);
command += setLifeTime.FormatWith(v6Details.AddressPrefix, v6Details.PrefixLength, validLifeTime.TotalSeconds, preferredLifeTime.TotalSeconds);
}
using (TelnetIpc telnet = new TelnetIpc(_adress.ToString(), 23))
{
telnet.Connect();
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(_userName);
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(_password);
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine("en");
telnet.SendLine("conf t");
telnet.SendLine("vlan {0}".FormatWith(routerVlanId));
telnet.SendLine(command);
telnet.SendLine("wr mem");
Thread.Sleep(TimeSpan.FromSeconds(10));
}
routerVlan = GetVirtualLanDetails(routerVlanId);
return(routerVlan.IPv6Details.Any(x => !x.ValidLeaseTime.Equals(validLifeTime.TotalSeconds)) &&
routerVlan.IPv6Details.Any(x => !x.PreferredLeaseTime.Equals(preferredLifeTime.TotalSeconds)));
}
/// <summary>
/// Delete helper address for the specified virtual LAN.
/// </summary>
/// <param name="helperAddress">The helper address.</param>
/// <returns>True if the helper address is deleted, else false.</returns>
public bool DeleteHelperAddress(int routerVlanId, IPAddress helperAddress)
{
Logger.LogInfo("Deleting helper-address:{0} on router VLAN : {1}".FormatWith(helperAddress, routerVlanId));
string command = string.Empty;
if (helperAddress.AddressFamily == AddressFamily.InterNetwork)
{
command = "no ip helper-address {0}".FormatWith(helperAddress);
}
else if (helperAddress.AddressFamily == AddressFamily.InterNetworkV6)
{
command = "no ipv6 helper-address unicast {0}".FormatWith(helperAddress);
}
string data = string.Empty;
using (TelnetIpc telnet = new TelnetIpc(_adress.ToString(), 23))
{
telnet.Connect();
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(_userName);
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(_password);
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine("en");
telnet.SendLine("conf t");
telnet.SendLine("vlan {0}".FormatWith(routerVlanId));
telnet.SendLine(command);
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine("wr mem");
Thread.Sleep(TimeSpan.FromSeconds(5));
// Validation
telnet.SendLine("sh run vlan {0}".FormatWith(routerVlanId));
Thread.Sleep(TimeSpan.FromSeconds(10));
data = telnet.ReceiveUntilMatch("$");
while (data.Contains("more", StringComparison.CurrentCultureIgnoreCase))
{
data = data.Remove(data.IndexOf("-- more", StringComparison.CurrentCultureIgnoreCase));
telnet.SendLine(" ");
Thread.Sleep(TimeSpan.FromSeconds(10));
data += telnet.ReceiveUntilMatch("$");
}
data = data.Replace(controlCharacters, string.Empty);
}
if (data.Contains(command.Replace("no ", string.Empty).Trim()))
{
Logger.LogInfo("Failed to delete helper-address: {0} on VLAN: {1}".FormatWith(helperAddress, routerVlanId));
return(false);
}
else
{
Logger.LogInfo("Deleted helper-address: {0} on VLAN: {1}".FormatWith(helperAddress, routerVlanId));
return(true);
}
}
/// <summary>
/// Set the flags for a particular virtual LAN.
/// </summary>
/// <param name="routerVlanId">The virtual LAN id.</param>
/// <param name="routerFlag"><see cref="RouterFlags"/></param>
/// <returns>True if the flag is set, else false.</returns>
public bool SetRouterFlag(int routerVlanId, RouterFlags routerFlag)
{
bool result = false;
string flagDescription = RouterFlags.None == routerFlag ? "Disabling M and O" : "Setting {0}".FormatWith(routerFlag);
Logger.LogInfo("{0} flag on router VLAN : {1}".FormatWith(flagDescription, routerVlanId));
using (TelnetIpc telnet = new TelnetIpc(_adress.ToString(), 23))
{
telnet.Connect();
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(_userName);
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(_password);
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine("en");
telnet.SendLine("conf t");
telnet.SendLine("vlan {0}".FormatWith(routerVlanId));
// TODO: Remove multiple if else
if (routerFlag == RouterFlags.Managed)
{
telnet.SendLine(Enum <RouterFlags> .Value(RouterFlags.Managed));
telnet.SendLine(("no {0}".FormatWith(Enum <RouterFlags> .Value(RouterFlags.Other))));
}
else if (routerFlag == RouterFlags.Other)
{
telnet.SendLine(Enum <RouterFlags> .Value(RouterFlags.Other));
telnet.SendLine(("no {0}".FormatWith(Enum <RouterFlags> .Value(RouterFlags.Managed))));
}
else if (routerFlag == RouterFlags.Both)
{
telnet.SendLine(Enum <RouterFlags> .Value(RouterFlags.Other));
telnet.SendLine(Enum <RouterFlags> .Value(RouterFlags.Managed));
}
else
{
telnet.SendLine(("no {0}".FormatWith(Enum <RouterFlags> .Value(RouterFlags.Managed))));
telnet.SendLine(("no {0}".FormatWith(Enum <RouterFlags> .Value(RouterFlags.Other))));
}
telnet.SendLine("wr mem");
Thread.Sleep(TimeSpan.FromSeconds(10));
telnet.SendLine("sh run vlan {0}".FormatWith(routerVlanId));
Thread.Sleep(TimeSpan.FromSeconds(10));
string vlanData = telnet.ReceiveUntilMatch("$");
while (vlanData.Contains("more", StringComparison.CurrentCultureIgnoreCase))
{
vlanData = vlanData.Remove(vlanData.IndexOf("-- more", StringComparison.CurrentCultureIgnoreCase));
telnet.SendLine(" ");
Thread.Sleep(TimeSpan.FromSeconds(10));
vlanData += telnet.ReceiveUntilMatch("$");
}
vlanData = vlanData.Replace(controlCharacters, string.Empty);
// TODO: Remove multiple if else's
if (routerFlag == RouterFlags.Managed)
{
result = vlanData.Contains(Enum <RouterFlags> .Value(RouterFlags.Managed)) && !vlanData.Contains(Enum <RouterFlags> .Value(RouterFlags.Other));
}
else if (routerFlag == RouterFlags.Other)
{
result = vlanData.Contains(Enum <RouterFlags> .Value(RouterFlags.Other)) && !vlanData.Contains(Enum <RouterFlags> .Value(RouterFlags.Managed));
}
else if (routerFlag == RouterFlags.Both)
{
result = vlanData.Contains(Enum <RouterFlags> .Value(RouterFlags.Managed)) && vlanData.Contains(Enum <RouterFlags> .Value(RouterFlags.Other));
}
else
{
result = !vlanData.Contains(Enum <RouterFlags> .Value(RouterFlags.Managed)) && !vlanData.Contains(Enum <RouterFlags> .Value(RouterFlags.Other));
}
flagDescription = RouterFlags.None == routerFlag ? "disabled M and O" : "set {0}".FormatWith(routerFlag);
if (result)
{
Logger.LogInfo("Successfully {0} flag on router VLAN : {1}".FormatWith(flagDescription, routerVlanId));
}
else
{
Logger.LogInfo("Failed to {0} flag on router VLAN : {1}".FormatWith(flagDescription, routerVlanId));
}
return(result);
}
}
/// <summary>
/// Disable IPv6 for a particular virtual LAN.
/// </summary>
/// <param name="routerVlanId">The virtual LAN id.</param>
/// <returns>True if IPv6 is disabled, else false.</returns>
public bool DisableIPv6Address(int routerVlanId)
{
Logger.LogInfo("Disabling IPv6 addresses in router.");
RouterVirtualLAN routerVlan = GetVirtualLanDetails(routerVlanId);
Collection <RouterIPv6Details> routerIpv6Details = routerVlan.IPv6Details;
SetRouterFlag(routerVlanId, RouterFlags.None);
// TODO: Remove hard coded prefix value.
string ipData = "no ipv6 address {0}/{1}\n";
string prefixData = "no ipv6 nd ra prefix {0}/{1}\n";
string disableIPv6 = "no ipv6 enable\n";
string reachableTime = "no ipv6 nd reachable-time\n";
string reachableTimera = "no ipv6 nd ra reachable-time\n";
string linklocal = "no ipv6 address {0} link-local\n".FormatWith(routerVlan.LinkLocalAddress);
// string ipv6helperAddress = "no ipv6 helper-address unicast {0}\n".FormatWith(routerVlan.IPv6HelperAddress);
string command = string.Empty;
command += disableIPv6;
foreach (RouterIPv6Details ipv6Details in routerIpv6Details)
{
if (!ipv6Details.IPv6Address.Equals(IPAddress.IPv6None))
{
command += ipData.FormatWith(ipv6Details.IPv6Address, ipv6Details.PrefixLength);
}
command += prefixData.FormatWith(ipv6Details.AddressPrefix, ipv6Details.PrefixLength);
}
command += reachableTime;
command += reachableTimera;
command += linklocal;
// command += ipv6helperAddress;
using (TelnetIpc telnet = new TelnetIpc(_adress.ToString(), 23))
{
telnet.Connect();
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(_userName);
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(_password);
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine("en");
telnet.SendLine("conf t");
telnet.SendLine("vlan {0}".FormatWith(routerVlanId));
telnet.SendLine(command);
telnet.SendLine("wr mem");
Thread.Sleep(TimeSpan.FromSeconds(10));
}
// Validation
routerVlan = GetVirtualLanDetails(routerVlanId);
if (routerVlan.IPv6Details.Count == 0)
{
Logger.LogInfo("Successfully disabled IPv6 addresses on VLAN: {0}".FormatWith(routerVlanId));
return(true);
}
else
{
Logger.LogInfo("Failed to disable IPv6 addresses on VLAN: {0}".FormatWith(routerVlanId));
return(false);
}
}
/// <summary>
/// Enable IPv6 for a particular virtual LAN.
/// </summary>
/// <param name="routerVlanId">The virtual LAN id.</param>
/// <param name="ipv6Addresses">List of addresses to be added for the virtual LAN.</param>
/// <returns>True if IPv6 is enabled, else false.</returns>
public bool EnableIPv6Address(int routerVlanId, Collection <IPAddress> ipv6Addresses)
{
if (null == ipv6Addresses || ipv6Addresses.Count == 0)
{
Logger.LogInfo("IPv6 addresses can not be empty.");
return(false);
}
Logger.LogInfo("Enabling IPv6 addresses in router.");
// TODO: Remove hard coded prefix value.
string ipData = "ipv6 address {0}/64\n";
string prefixData = "ipv6 nd ra prefix {0}/{1} {2} {3}\n";
string command = string.Empty;
foreach (IPAddress ipv6Address in ipv6Addresses)
{
command += ipData.FormatWith(ipv6Address.ToString());
//TODO: Get a logic to fetch the address prefix
command += prefixData.FormatWith(GetPrefix(ipv6Address), 64, VALID_LIFE_TIME, PREFERRED_LIFE_TIME);
}
using (TelnetIpc telnet = new TelnetIpc(_adress.ToString(), 23))
{
telnet.Connect();
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(_userName);
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine(_password);
Thread.Sleep(TimeSpan.FromSeconds(5));
telnet.SendLine("en");
telnet.SendLine("conf t");
telnet.SendLine("vlan {0}".FormatWith(routerVlanId));
telnet.SendLine(command);
telnet.SendLine("wr mem");
Thread.Sleep(TimeSpan.FromSeconds(10));
}
// Validation
RouterVirtualLAN routerVlan = GetVirtualLanDetails(routerVlanId);
bool isv6AddressPresesnt = false;
foreach (IPAddress address in ipv6Addresses)
{
if (null == routerVlan.IPv6Details.Where(x => x.IPv6Address.Equals(address)).FirstOrDefault())
{
isv6AddressPresesnt = false;
Logger.LogInfo("Failed to enable IPv6 addresses on VLAN: {0}".FormatWith(routerVlanId));
return(false);
}
else
{
isv6AddressPresesnt = true;
}
}
if (isv6AddressPresesnt)
{
Logger.LogInfo("Successfully enabled IPv6 addresses on VLAN: {0}".FormatWith(routerVlanId));
}
return(isv6AddressPresesnt);
}
/// <summary>
/// Check whether a Network Switch Port is Disabled
/// </summary>
/// <param name="portNumber">Port Number of Network Switch</param>
/// <returns>true if Disabled, false otherwise</returns>
public bool IsPortDisabled(int portNumber)
{
bool isDisabled = false;
// eg: Sample data for one interface
// Positive case | Negative case
// -----------------------------------
// interface 5 | interface 5
// disable | no lacp
// no lacp | exit
// exit |
// telnet works with port number 23
using (TelnetIpc telnet = new TelnetIpc(IPAddress.ToString(), 23))
{
try
{
telnet.Connect();
telnet.SendLine(" "); // send space to continue to actual telnet prompt
telnet.SendLine("show run"); // command to show the configuration details of the switch
Thread.Sleep(3000);
string configData = string.Empty;
while (true)
{
string data = telnet.ReceiveUntilMatch("$");
configData += data;
// if output contains -- MORE -- , few more configurations are available to display
// send space to get more details.
if (data.Contains("-- MORE --"))
{
telnet.SendLine(" ");
Thread.Sleep(3000);
}
else
{
// break the loop if it doesn't contain -- MORE --
break;
}
}
string[] lines = configData.Split('\n');
// walk through each line from the configData
for (int i = 0; i < lines.Length; i++)
{
string line = lines[i];
// check to see if the line contains "interface <port number>"
if (line.Contains("interface {0}".FormatWith(portNumber)))
{
for (int j = i + 1; j < lines.Length; j++)
{
line = lines[j];
// if the interface is disabled then turn on the flag and break the loop.
if (line.Contains("disable"))
{
isDisabled = true;
break;
}
// if exit is reached then it is end of interface details.
if (line.Contains("exit"))
{
break;
}
}
break;
}
}
}
catch (Exception ex)
{
Logger.LogInfo(ex.Message);
}
}
// Once the connection is disposed, a wait is required to make sure that the connection is closed
Thread.Sleep(TimeSpan.FromMilliseconds(1000));
return(isDisabled);
}
/// <summary>
/// Get the link speed of the specified port.
/// </summary>
/// <param name="portNumber">The port number.</param>
/// <returns>The link speed for the specified port.</returns>
/// Note : Can not return the <see cref="LinkSpeed"/> since there are multiple enum values mapped to the port link speed.
/// eg: 1000FDX corresponds to auto and auto-1000
/// 100FDX corresponds to 100-full and auto-100
private string GetLinkSpeed(int portNumber)
{
/* ????[2J[?7l[3;23r[?6l[1;1H[?25l[1;1HProCurve J4903A Switch 2824
* Copyright (C) 1991-2009 Hewlett-Packard Co. All Rights Reserved.
* RESTRICTED RIGHTS LEGEND
* Use, duplication, or disclosure by the Government is subject to restrictions
* as set forth in subdivision (b) (3) (ii) of the Rights in Technical Data and Computer Software clause at 52.227-7013.
* HEWLETT-PACKARD COMPANY, 3000 Hanover St., Palo Alto, CA 94303
* We'd like to keep you up to date about:
* Software feature updates
* New product announcements
* Special events
* Please register your products now at: www.ProCurve.com
* [24;1HPress any key to continue[1;1H[?25h[24;27H[2J[?7l[3;23r[?6l[24;27H[?25h[24;27H[?6l[1;24r[?7l[2J[24;27H[1;24r[24;27H[2J[?7l[1;24r[?6l[24;1H[1;24r[24;1H[24;1H[2K[24;1H[?25h[24;1H[24;1HProCurve Switch 2824# [24;1H[24;23H[24;1H[?25h[24;23H[24;23Hconf t[24;23H[?25h[24;29H[24;0HE[24;1H[24;29H[24;1H[2K[24;1H[?25h[24;1H[1;24r[24;1H[1;24r[24;1H[24;1H[2K[24;1H[?25h[24;1H[24;1HProCurve Switch 2824(config)# [24;1H[24;31H[24;1H[?25h[24;31H[24;31Hshow inter[24;31H[?25h[24;41H[24;41Hface brief[24;41H[?25h[24;51H[24;51H ethernet [24;51H[?25h[24;61H[24;61H24[24;61H[?25h[24;63H[24;0HE[24;1H[24;63H[24;1H[2K[24;1H[?25h[24;1H[1;24r[24;1H
* Status and Counters - Port Status
| Intrusion MDI Flow Bcast
| Port Type | Alert Enabled Status Mode Mode Ctrl Limit
| ----- --------- + --------- ------- ------ ---------- ----- ----- ------
| 24 100/1000T | No Yes Down 100FDx MDI off 0
| [1;24r[24;1H[24;1H[2K[24;1H[?25h[24;1H[24;1HProCurve Switch 2824(config)# [24;1H[24;31H[24;1H[?25h[24;31H*/
try
{
string result = string.Empty;
using (TelnetIpc telnet = new TelnetIpc(IPAddress.ToString(), 23))
{
telnet.Connect();
telnet.SendLine("/n");
telnet.SendLine("conf t");
telnet.SendLine("show interface brief ethernet {0}".FormatWith(portNumber));
Thread.Sleep(TimeSpan.FromSeconds(20));
result = telnet.ReceiveUntilMatch("$");
}
Thread.Sleep(TimeSpan.FromMinutes(1));
if (!string.IsNullOrEmpty(result))
{
result = result.Replace("\r", "").Trim();
string[] data = result.Split(new char[] { '\n' }, StringSplitOptions.RemoveEmptyEntries);
int index = Array.FindIndex(data, x => x.TrimStart().StartsWith("Port", StringComparison.CurrentCultureIgnoreCase));
if (-1 == index)
{
Logger.LogInfo("Failed to fetch the value of link speed for port: {0}.".FormatWith(portNumber));
return(string.Empty);
}
// Skip the next line and fetch the speed information for the port.
string[] portSpeedData = data[index + 2].Split(new char[] { ' ' }, StringSplitOptions.RemoveEmptyEntries);
return(portSpeedData[6].Trim());
}
else
{
Logger.LogInfo("Failed to fetch the value of link speed for port: {0}.".FormatWith(portNumber));
return(string.Empty);
}
}
catch (SocketException ex)
{
Logger.LogInfo("Failed to fetch the value of link speed for port: {0}.".FormatWith(portNumber));
Logger.LogInfo(ex.Message);
return(string.Empty);
}
catch (Exception ex)
{
Logger.LogInfo("Failed to fetch the value of link speed for port: {0}.".FormatWith(portNumber));
Logger.LogInfo(ex.Message);
return(string.Empty);
}
}