private void ucButton2_Click(object sender, EventArgs e)
{
Messages messages = new Messages();
if (rCardEditor.Text.Trim() == String.Empty)
{
messages.Add(new UserControl.Message(MessageType.Error, "$CSError_RCard_CanNot_Empty"));
ApplicationRun.GetInfoForm().Add(messages);
return;
}
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
string sourceRCard = dataCollectFacade.GetSourceCard(rCardEditor.Text.Trim().ToUpper(), string.Empty);
string tsStatus;
//Laws Lu,2005/11/22,新增 添加代理录入人员
//modified by jessie lee, 2005/11/24
string userCode = ApplicationService.Current().UserCode;
if (txtAgentUser.Checked == true && txtAgentUser.Value.Trim().Length == 0)
{
messages.Add(new UserControl.Message(MessageType.Error, "$CS_Error_Vicegerent_CanNot_Empty"));
ApplicationRun.GetInfoForm().Add(messages);
return;
}
else if (txtAgentUser.Checked == true && txtAgentUser.Value != String.Empty)
{
if ((new BenQGuru.eMES.Security.SecurityFacade(this.DataProvider)).CheckResourceRight(txtAgentUser.Value.Trim().ToUpper()
, ApplicationService.Current().ResourceCode))
{
userCode = txtAgentUser.Value;
}
else
{
messages.Add(new UserControl.Message(MessageType.Error, "$CS_Error_Vicegerent_Is_Wrong"));
ApplicationRun.GetInfoForm().Add(messages);
return;
}
}
if (ultraCheckEditor1.Checked == true)
{
tsStatus = TSStatus.TSStatus_Reflow;
//勾选回流，然后不工位栏位未选资料也可允许通过。在业务上回流是一定有确定的工位的。
//系统要检查此时保存，工位是否为空。
if (ucLabComboxOPCode.SelectedItemText == string.Empty)
{
messages.Add(new UserControl.Message(MessageType.Error, "$CS_Error_ReflowOPCode_CanNot_Empty"));
ApplicationRun.GetInfoForm().Add(messages);
ucLabComboxOPCode.Focus();
return;
}
}
else if (ultraCheckEditorScrap.Checked == true)
{
tsStatus = TSStatus.TSStatus_Scrap;
}
else
{
tsStatus = TSStatus.TSStatus_Complete;
// //修改,Karron Qiu 2005-9-23
// //线上采集的不良品，修复后则“回流”；修不好则“报废”。而不选“回流”或“报废”代表该产品要入了良品库，
// //线上的不良品修好后是直接回产线回流，不需要入良品库的
// messages.Add(new UserControl.Message(MessageType.Error,"$CSError_Please_Select_Reflow_OR_Scrap"));//请选择回流或者报废
// ApplicationRun.GetInfoForm().Add(messages);
// return;
}
ActionFactory actionFactory = new ActionFactory(this.DataProvider);
IAction actionTSComplete = actionFactory.CreateAction(ActionType.DataCollectAction_TSComplete);
TSActionEventArgs actionEventArgs = new TSActionEventArgs(
ActionType.DataCollectAction_TSComplete,
FormatHelper.PKCapitalFormat(FormatHelper.CleanString(sourceRCard)),
userCode,
ApplicationService.Current().ResourceCode,
tsStatus,
this.ucLabEditMOCode.Value,
this.ucLabEditItemCode.Value,
this.ucLabEditRoute.Value,
this.ucLabComboxOPCode.SelectedItemText,
ApplicationService.Current().UserCode,
FormatHelper.CleanString(this.txtScrapCause.Text, 100));
//修改 Karron Qiu 2005-9-26
//在做维修完成处理时，依然按照之前的检查逻辑
//（不良品是否“已选不良零件”或“已选不良位置”有信息），如果没有，则弹出提示信息，
//比如：“该不良品无“不良零件”或“不良位置”信息，是否要维修完成”，
//点击“确认”即维修完成，点击“取消”则维修完成失败
TSFacade tsFacade = new TSFacade(this.DataProvider);
object obj = tsFacade.GetCardLastTSRecord(actionEventArgs.RunningCard);
if (obj == null)
{
messages.Add(new UserControl.Message(MessageType.Error, "$CSError_Card_Not_In_TS"));
ApplicationRun.GetInfoForm().Add(messages);
return;
}
else
{
Domain.TS.TS ts = (Domain.TS.TS)obj;
if (tsFacade.CheckErrorCodeCountAndErrorSolutionForTSComplete(actionEventArgs.RunningCard))
{
if (!tsFacade.CheckErrorPartAndErrorLocationForTSComplete(actionEventArgs.RunningCard))
{
if (System.Windows.Forms.MessageBox.Show(null, MutiLanguages.ParserString("$CS_No_ErrorPartAndLoc_Is_Com"), "", System.Windows.Forms.MessageBoxButtons.OKCancel) == System.Windows.Forms.DialogResult.Cancel)
{
return;
}
}
}
else
{
messages.Add(new UserControl.Message(MessageType.Error, "$CSError_Card_TSStatus_IsNot_TS $Current_Status $" + ts.TSStatus));
ApplicationRun.GetInfoForm().Add(messages);
return;
}
}
//karron qiu ,2005/9/16 ,增加try catch,在catch中添加rollback操作
DataProvider.BeginTransaction();
try
{
messages.AddMessages(actionTSComplete.Execute(actionEventArgs));
if (!messages.IsSuccess())
{
this.DataProvider.RollbackTransaction();
ApplicationRun.GetInfoForm().Add(messages);
}
else
{
this.DataProvider.CommitTransaction();
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Success, "$CS_TSScrap_SUCCESS"));
}
}
catch
{
this.DataProvider.RollbackTransaction();
throw;
}
finally
{
(DataProvider as SQLDomainDataProvider).PersistBroker.CloseConnection();
}
}
/// <summary>
/// Reject指令采集
/// </summary>
/// <returns></returns>
private Messages RunReject()
{
Messages messages = new Messages();
try
{
object[] ErrorCodes = GetSelectedErrorCodes(); //取不良代码组＋不良代码
if (cbxOutLine.Checked == true)
{
if (CheckOutlineOPInRoute())
{
messages.Add(new UserControl.Message(MessageType.Error, "$CS_OutLineOP_In_ThisRoute"));
return(messages);
}
//added by jessie lee, 2005/12/12, 判断是否是最后一道工序
if (IsLastOP(product.LastSimulation.MOCode, product.LastSimulation.RouteCode, product.LastSimulation.OPCode))
{
messages.Add(new UserControl.Message(MessageType.Error, "$CS_Op_IsLast_OutLineOP_Cannot_Collect"));
return(messages);
}
IAction dataCollectModule = new ActionFactory(this.DataProvider).CreateAction(ActionType.DataCollectAction_OutLineReject);
TSActionEventArgs actionArgs = new TSActionEventArgs(ActionType.DataCollectAction_OutLineReject,
txtRunningCard.Value.Trim(),
ApplicationService.Current().UserCode,
ApplicationService.Current().ResourceCode,
product,
ErrorCodes,
null,
txtMEMO.Value);
actionArgs.OPCode = cbxOutLine.SelectedItemText;
messages.AddMessages(dataCollectModule.Execute(actionArgs));
}
else
{
IAction dataCollectModule = new ActionFactory(this.DataProvider).CreateAction(ActionType.DataCollectAction_Reject);
messages.AddMessages(dataCollectModule.Execute(
new TSActionEventArgs(ActionType.DataCollectAction_Reject,
txtRunningCard.Value.Trim(),
ApplicationService.Current().UserCode,
ApplicationService.Current().ResourceCode,
product,
ErrorCodes,
null,
txtMEMO.Value)));
}
if (messages.IsSuccess())
{
messages.Add(new UserControl.Message(MessageType.Success, "$CS_RejectSUCCESS"));
}
return(messages);
}
catch (Exception e)
{
messages.Add(new UserControl.Message(e));
return(messages);
}
}
