public void SetupTestRun()
{
var config = new SpecsForMvcConfig();
config.UseIISExpress()
.UsePort(44300)
.UseHttps()
.With(Project.Named("SpecsFor.Mvc.Demo"))
.CleanupPublishedFiles()
.ApplyWebConfigTransformForConfig("Test");
//TODO: The order of registration matters right now, but it shouldn't.
config.RegisterArea <TasksAreaRegistration>();
config.BuildRoutesUsing(r => MvcApplication.RegisterRoutes(r));
//NOTE: You can use whatever browser you want. For build servers, you can check an environment
// variable to determine which browser to use, enabling you to re-run the same suite of
// tests once for each browser.
//config.UseBrowser(BrowserDriver.InternetExplorer);
config.UseBrowser(BrowserDriver.Chrome);
//config.UseBrowser(BrowserDriver.Firefox);
config.InterceptEmailMessagesOnPort(13565);
config.AuthenticateBeforeEachTestUsing <StandardAuthenticator>();
config.SetBrowserWindowSize(width: 1024, height: 768);
_host = new SpecsForIntegrationHost(config);
_host.Start();
}
static public void AssemblyInit(TestContext tc)
{
var config = new SpecsForMvcConfig();
//SpecsFor.Mvc can spin up an instance of IIS Express to host your app
//while the specs are executing.
config.UseIISExpress()
//To do that, it needs to know the name of the project to test...
.With(Project.Named("Bonobo.Git.Server"))
.UsePort(20000);
//And optionally, it can apply Web.config transformations if you want
//it to.
//.ApplyWebConfigTransformForConfig("Test");
//In order to leverage the strongly-typed helpers in SpecsFor.Mvc,
//you need to tell it about your routes. Here we are just calling
//the infrastructure class from our MVC app that builds the RouteTable.
config.BuildRoutesUsing(r => Bonobo.Git.Server.App_Start.RouteConfig.RegisterRoutes(r));
//SpecsFor.Mvc can use either Internet Explorer or Firefox. Support
//for Chrome is planned for a future release.
config.UseBrowser(BrowserDriver.InternetExplorer);
config.AuthenticateBeforeEachTestUsing <AuthHandler>();
//Does your application send E-mails? Well, SpecsFor.Mvc can intercept
//those while your specifications are executing, enabling you to write
//tests against the contents of sent messages.
//config.InterceptEmailMessagesOnPort(13565);
//The host takes our configuration and performs all the magic. We
//need to keep a reference to it so we can shut it down after all
//the specifications have executed.
_host = new SpecsForIntegrationHost(config);
_host.Start();
}
public void SetupTestRun()
{
var config = new SpecsForMvcConfig();
config.UseIISExpress()
.With(Project.Named("SpecsFor.Mvc.Demo"))
.CleanupPublishedFiles()
.ApplyWebConfigTransformForConfig("Test");
//TODO: The order of registration matters right now, but it shouldn't.
config.RegisterArea<TasksAreaRegistration>();
config.BuildRoutesUsing(r => MvcApplication.RegisterRoutes(r));
//NOTE: You can use whatever browser you want. For build servers, you can check an environment
// variable to determine which browser to use, enabling you to re-run the same suite of
// tests once for each browser.
//config.UseBrowser(BrowserDriver.InternetExplorer);
config.UseBrowser(BrowserDriver.Chrome);
//config.UseBrowser(BrowserDriver.Firefox);
config.InterceptEmailMessagesOnPort(13565);
config.AuthenticateBeforeEachTestUsing<StandardAuthenticator>();
_host = new SpecsForIntegrationHost(config);
_host.Start();
}
private void HostStart()
{
var config = new SpecsForMvcConfig();
config.UseIISExpress()
.With(Project.Named("NHibernate.AspNet.Web"))
.CleanupPublishedFiles()
.ApplyWebConfigTransformForConfig("Debug");
//TODO: The order of registration matters right now, but it shouldn't.
//config.RegisterArea<TasksAreaRegistration>();
config.BuildRoutesUsing(r => RouteConfig.RegisterRoutes(r));
//NOTE: You can use whatever browser you want. For build servers, you can check an environment
// variable to determine which browser to use, enabling you to re-run the same suite of
// tests once for each browser.
//config.UseBrowser(BrowserDriver.InternetExplorer);
//config.UseBrowser(BrowserDriver.Chrome);
config.UseBrowser(BrowserDriver.Firefox);
config.InterceptEmailMessagesOnPort(13565);
//config.AuthenticateBeforeEachTestUsing<StandardAuthenticator>();
_host = new SpecsForIntegrationHost(config);
_host.Start();
}
static public void AssemblyInit(TestContext tc)
{
// so we can use the resources in our test even if your language is not en-US
Resources.Culture = new System.Globalization.CultureInfo("en-US");
LoadedConfig = LoadConfiguration();
var config = new SpecsForMvcConfig();
//SpecsFor.Mvc can spin up an instance of IIS Express to host your app
//while the specs are executing.
config.UseIISExpress()
//To do that, it needs to know the name of the project to test...
.With(Project.Named("Bonobo.Git.Server"))
.UsePort(20000)
//And optionally, it can apply Web.config transformations if you want
//it to.
.ApplyWebConfigTransformForConfig("Test")
.UseMSBuildExecutableAt(@"C:\Program Files (x86)\MSBuild\12.0\Bin\msbuild.exe");
//.UseMSBuildExecutableAt(@"C:\Program Files (x86)\MSBuild\14.0\Bin\MSBuild.exe");
//In order to leverage the strongly-typed helpers in SpecsFor.Mvc,
//you need to tell it about your routes. Here we are just calling
//the infrastructure class from our MVC app that builds the RouteTable.
config.BuildRoutesUsing(r => Bonobo.Git.Server.App_Start.RouteConfig.RegisterRoutes(r));
//SpecsFor.Mvc can use either Internet Explorer or Firefox. Support
//for Chrome is planned for a future release.
config.UseBrowser(BrowserDriver.InternetExplorer);
// We cannot use the authenticate before each step helper
// because it is only executed once per class.
// So if class A test1 runs, then class B test2 (this leaves us logged out)
// then class A test2 (which assumes we are logged in). It will fail
//config.AuthenticateBeforeEachTestUsing<AuthHandler>();
//Does your application send E-mails? Well, SpecsFor.Mvc can intercept
//those while your specifications are executing, enabling you to write
//tests against the contents of sent messages.
//config.InterceptEmailMessagesOnPort(13565);
// If we set a WithPublishDirectory above, then this would change
WebApplicationDirectory = Path.Combine(Directory.GetCurrentDirectory(), "SpecsForMvc.TestSite");
//The host takes our configuration and performs all the magic. We
//need to keep a reference to it so we can shut it down after all
//the specifications have executed.
_host = new SpecsForIntegrationHost(config);
//try{
_host.Start();
//}
//catch(Exception ex)
//{
//}
}
public void Setup()
{
var config = new SpecsForMvcConfig();
config.UseIISExpress()
.ApplicationHostConfigurationFile(@"applicationhost.config")
.With(Project.Named("WindowsAuthSampleApp"));
config.UseBrowser(BrowserDriver.InternetExplorer);
_host = new SpecsForIntegrationHost(config);
_host.Start();
}
public void Startup()
{
var config = new SpecsForMvcConfig();
config.UseIISExpress().With(Project.Named("HeroicSupport.Web")).ApplyWebConfigTransformForConfig("Test");
config.BuildRoutesUsing(RouteConfig.RegisterRoutes);
config.UseBrowser(BrowserDriver.Chrome);
config.AuthenticateBeforeEachTestUsing <RegularUserAuthenticator>();
config.InterceptEmailMessagesOnPort(12345);
config.Use <SeedDataConfig>();
_host = new SpecsForIntegrationHost(config);
_host.Start();
}
public void SetupTestRun()
{
var config = new SpecsForMvcConfig();
config.UseIISExpress()
.With(Project.Named("SpecsFor.Mvc.Demo"))
.ApplyWebConfigTransformForConfig("Test");
config.BuildRoutesUsing(r => MvcApplication.RegisterRoutes(r));
config.RegisterArea<TasksAreaRegistration>();
config.UseBrowser(BrowserDriver.InternetExplorer);
config.InterceptEmailMessagesOnPort(13565);
config.AuthenticateBeforeEachTestUsing<StandardAuthenticator>();
_host = new SpecsForIntegrationHost(config);
_host.Start();
}
public void SetupTestRun()
{
var config = new SpecsForMvcConfig();
config.UseIISExpress()
.UsePort(44300)
.With(Project.Named("Timesheet"))
.CleanupPublishedFiles();
config.BuildRoutesUsing(r => RouteConfig.RegisterRoutes(RouteTable.Routes));
//config.UseBrowser(BrowserDriver.InternetExplorer);
config.UseBrowser(BrowserDriver.Chrome);
//config.UseBrowser(BrowserDriver.Firefox);
config.SetBrowserWindowSize(width: 1024, height: 768);
_host = new SpecsForIntegrationHost(config);
_host.Start();
}
public void SetupTestRun()
{
var config = new SpecsForMvcConfig();
config.UseIISExpress()
.With(Project.Named("SpecsFor.Mvc.Demo"))
.ApplyWebConfigTransformForConfig("Test");
config.BuildRoutesUsing(r => MvcApplication.RegisterRoutes(r));
config.RegisterArea <TasksAreaRegistration>();
config.UseBrowser(BrowserDriver.InternetExplorer);
config.InterceptEmailMessagesOnPort(13565);
config.AuthenticateBeforeEachTestUsing <StandardAuthenticator>();
_host = new SpecsForIntegrationHost(config);
_host.Start();
}
public static void SetupTestRun()
{
if (IsRun)
{
return;
}
string msBuild = ToolLocationHelper.GetPathToBuildToolsFile("msbuild.exe", "16.0");
var config = new SpecsForMvcConfig();
config.UseIISExpress()
.With(Project.Named("WeatherApp.FrontEnd"))
.UseMSBuildExecutableAt(msBuild);
config.BuildRoutesUsing(r => RouteConfig.RegisterRoutes(r));
config.UseBrowser(BrowserDriver.InternetExplorer);
config.PostOperationDelay(new TimeSpan(0, 0, 0, 4));
_host = new SpecsForIntegrationHost(config);
_host.Start();
app = new MvcWebApp();
IsRun = true;
}
public static void InitializeTestRun()
{
var config = new SpecsForMvcConfig();
config.UseIISExpress()
.With(Project.Named("Demo"))
.ApplyWebConfigTransformForConfig("Debug");
config.BuildRoutesUsing(r => RouteConfig.RegisterRoutes(r));
// If you want to be authenticated for each request,
// implement IHandleAuthentication
//config.AuthenticateBeforeEachTestUsing<SampleAuthenticator>();
// I originally tried to use Chrome, but the Selenium
// Chrome WebDriver, but it must be out of date because
// Chrome gave me an error and the tests didn't run (NOTE:
// I used the latest Selenium NuGet package as of
// 23-08-2014). However, Firefox worked fine, so I used that.
config.UseBrowser(BrowserDriver.Firefox);
integrationHost = new SpecsForIntegrationHost(config);
integrationHost.Start();
}