public static SolidEdgePart.Model CreateBaseTabByCircle(SolidEdgePart.SheetMetalDocument sheetMetalDocument) { SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Sketchs sketchs = null; SolidEdgePart.Sketch sketch = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Circles2d circles2d = null; SolidEdgeFrameworkSupport.Circle2d circle2d = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; double x = 0; double y = 0; double radius = 0.05; // Get refplane. refPlanes = sheetMetalDocument.RefPlanes; // Get a reference to front RefPlane. refPlane = refPlanes.GetFrontPlane(); // Create sketch. sketchs = sheetMetalDocument.Sketches; sketch = sketchs.Add(); // Create profile. profiles = sketch.Profiles; profile = profiles.Add(refPlane); // Create 2D circle. circles2d = profile.Circles2d; circle2d = circles2d.AddByCenterRadius(x, y, radius); // Hide profile. profile.Visible = false; // Create extruded protrusion. models = sheetMetalDocument.Models; model = models.AddBaseTab(profile, SolidEdgePart.FeaturePropertyConstants.igRight); return(model); }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.SheetMetalDocument sheetMetalDocument = null; SolidEdgePart.RefPlanes refplanes = null; SolidEdgePart.RefPlane refplane = null; SolidEdgePart.Model model = null; SolidEdgePart.HoleDataCollection holeDataCollection = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgePart.Holes2d holes2d = null; SolidEdgePart.Hole2d hole2d = null; SolidEdgePart.Holes holes = null; SolidEdgePart.Hole hole = null; long profileStatus = 0; List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>(); SolidEdgePart.UserDefinedPatterns userDefinedPatterns = null; SolidEdgePart.UserDefinedPattern userDefinedPattern = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the Documents collection. documents = application.Documents; // Create a new sheetmetal document. sheetMetalDocument = documents.AddSheetMetalDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Call helper method to create the actual geometry. model = SheetMetalHelper.CreateBaseTabByCircle(sheetMetalDocument); // Get a reference to the RefPlanes collection. refplanes = sheetMetalDocument.RefPlanes; // Get a reference to front RefPlane. refplane = refplanes.GetFrontPlane(); // Get a reference to the ProfileSets collection. profileSets = sheetMetalDocument.ProfileSets; // Add new ProfileSet. profileSet = profileSets.Add(); // Get a reference to the Profiles collection. profiles = profileSet.Profiles; // Add new Profile. profile = profiles.Add(refplane); // Get a reference to the Holes2d collection. holes2d = profile.Holes2d; // This creates a cross pattern of holes. double[,] holeMatrix = new double[, ] { //{x, y} { 0.00, 0.00 }, { -0.01, 0.00 }, { -0.02, 0.00 }, { -0.03, 0.00 }, { -0.04, 0.00 }, { 0.01, 0.00 }, { 0.02, 0.00 }, { 0.03, 0.00 }, { 0.04, 0.00 }, { 0.00, -0.01 }, { 0.00, -0.02 }, { 0.00, -0.03 }, { 0.00, -0.04 }, { 0.00, 0.01 }, { 0.00, 0.02 }, { 0.00, 0.03 }, { 0.00, 0.04 } }; // Draw the Base Profile. for (int i = 0; i <= holeMatrix.GetUpperBound(0); i++) { // Add new Hole2d. hole2d = holes2d.Add( XCenter: holeMatrix[i, 0], YCenter: holeMatrix[i, 1]); } // Hide the profile. profile.Visible = false; // Close profile. profileStatus = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed); // Get a reference to the ProfileSet. profileSet = (SolidEdgePart.ProfileSet)profile.Parent; // Get a reference to the Profiles collection. profiles = profileSet.Profiles; // Add profiles to list for AddByProfiles(). for (int i = 1; i <= profiles.Count; i++) { profileList.Add(profiles.Item(i)); } // Get a reference to the HoleDataCollection collection. holeDataCollection = sheetMetalDocument.HoleDataCollection; // Add new HoleData. SolidEdgePart.HoleData holeData = holeDataCollection.Add( HoleType: SolidEdgePart.FeaturePropertyConstants.igRegularHole, HoleDiameter: 0.005, BottomAngle: 90); // Get a reference to the Holes collection. holes = model.Holes; // Add hole. hole = holes.AddFinite( Profile: profile, ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight, FiniteDepth: 0.005, Data: holeData); // Get a reference to the UserDefinedPatterns collection. userDefinedPatterns = model.UserDefinedPatterns; // Create the user defined pattern. userDefinedPattern = userDefinedPatterns.AddByProfiles( NumberOfProfiles: profileList.Count, ProfilesArray: profileList.ToArray(), SeedFeature: hole); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new UserDefinedPattern to ActiveSelectSet. selectSet.Add(userDefinedPattern); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
public static SolidEdgePart.Model CreateFiniteRevolvedProtrusion(SolidEdgePart.PartDocument partDocument) { SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; SolidEdgeFrameworkSupport.Lines2d lines2d = null; SolidEdgeFrameworkSupport.Line2d axis = null; SolidEdgeFrameworkSupport.Arcs2d arcs2d = null; SolidEdgeFrameworkSupport.Relations2d relations2d = null; SolidEdgePart.RefAxis refaxis = null; Array aProfiles = null; // Get a reference to the models collection. models = (SolidEdgePart.Models)partDocument.Models; // D1 to FA are parameters in a form, introduced by the user. double D1 = 0.020; double D2 = 0.026; double D3 = 0.003; double D4 = 0.014; double L1 = 0.040; double L2 = 0.030; double L3 = 0.005; // Get a reference to the ref planes collection. refPlanes = partDocument.RefPlanes; // Get a reference to front RefPlane. refPlane = refPlanes.GetFrontPlane(); // Get a reference to the profile sets collection. profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets; // Create a new profile set. profileSet = profileSets.Add(); // Get a reference to the profiles collection. profiles = profileSet.Profiles; // Create a new profile. profile = profiles.Add(refPlane); // Get a reference to the profile lines2d collection. lines2d = profile.Lines2d; // Get a reference to the profile arcs2d collection. arcs2d = profile.Arcs2d; double H = L1 - L2; double y = L1 - L3 - (D4 - D3) / (2 * Math.Tan((118 / 2) * (Math.PI / 180))); lines2d.AddBy2Points(D3 / 2, 0, D2 / 2, 0); // Line1 lines2d.AddBy2Points(D2 / 2, 0, D2 / 2, H); // Line2 lines2d.AddBy2Points(D2 / 2, H, D1 / 2, H); // Line3 lines2d.AddBy2Points(D1 / 2, H, D1 / 2, L1); // Line4 lines2d.AddBy2Points(D1 / 2, L1, D4 / 2, L1); // Line5 lines2d.AddBy2Points(D4 / 2, L1, D4 / 2, L1 - L3); // Line6 lines2d.AddBy2Points(D4 / 2, L1 - L3, D3 / 2, y); // Line7 lines2d.AddBy2Points(D3 / 2, y, D3 / 2, 0); // Line8 axis = lines2d.AddBy2Points(0, 0, 0, L1); profile.ToggleConstruction(axis); // relations relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d; relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(5), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); relations2d.AddKeypoint(lines2d.Item(5), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(6), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); relations2d.AddKeypoint(lines2d.Item(6), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(7), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); relations2d.AddKeypoint(lines2d.Item(7), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(8), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); relations2d.AddKeypoint(lines2d.Item(8), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); refaxis = (SolidEdgePart.RefAxis)profile.SetAxisOfRevolution(axis); // Close the profile. int status = profile.End(SolidEdgePart.ProfileValidationType.igProfileRefAxisRequired); profile.Visible = false; // Create a new array of profile objects. aProfiles = Array.CreateInstance(typeof(SolidEdgePart.Profile), 1); aProfiles.SetValue(profile, 0); // add Finite Revolved Protrusion. model = models.AddFiniteRevolvedProtrusion( aProfiles.Length, ref aProfiles, refaxis, SolidEdgePart.FeaturePropertyConstants.igRight, 2 * Math.PI, null, null); return(model); }
public static SolidEdgePart.Model CreateSweptProtrusion(SolidEdgePart.PartDocument partDocument) { SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; SolidEdgePart.Sketchs sketches = null; SolidEdgePart.Sketch sketch = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile sketchProfile = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Circles2d circles2d = null; List <SolidEdgePart.Profile> listPaths = new List <SolidEdgePart.Profile>(); List <SolidEdgePart.FeaturePropertyConstants> listPathTypes = new List <SolidEdgePart.FeaturePropertyConstants>(); List <SolidEdgePart.Profile> listSections = new List <SolidEdgePart.Profile>(); List <SolidEdgePart.FeaturePropertyConstants> listSectionTypes = new List <SolidEdgePart.FeaturePropertyConstants>(); List <int> listOrigins = new List <int>(); // Get a reference to the models collection. models = (SolidEdgePart.Models)partDocument.Models; // Get a reference to the Sketches collections. sketches = (SolidEdgePart.Sketchs)partDocument.Sketches; // Get a reference to the profile sets collection. profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets; // Get a reference to the ref planes collection. refPlanes = (SolidEdgePart.RefPlanes)partDocument.RefPlanes; // Get a reference to front RefPlane. refPlane = refPlanes.GetFrontPlane(); // Add a new sketch. sketch = (SolidEdgePart.Sketch)sketches.Add(); // Add profile for sketch on specified refplane. sketchProfile = sketch.Profiles.Add(refPlane); // Get a reference to the Circles2d collection. circles2d = sketchProfile.Circles2d; // Draw the Base Profile. circles2d.AddByCenterRadius(0, 0, 0.02); // Close the profile. sketchProfile.End(SolidEdgePart.ProfileValidationType.igProfileClosed); // Arrays for AddSweptProtrusion(). listPaths.Add(sketchProfile); listPathTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); // NOTE: profile is the Curve. refPlane = refPlanes.AddNormalToCurve( sketchProfile, SolidEdgePart.ReferenceElementConstants.igCurveEnd, refPlanes.GetFrontPlane(), SolidEdgePart.ReferenceElementConstants.igPivotEnd, true, System.Reflection.Missing.Value); // Add a new profile set. profileSet = (SolidEdgePart.ProfileSet)profileSets.Add(); // Get a reference to the profiles collection. profiles = (SolidEdgePart.Profiles)profileSet.Profiles; // add a new profile. profile = (SolidEdgePart.Profile)profiles.Add(refPlane); // Get a reference to the Circles2d collection. circles2d = profile.Circles2d; // Draw the Base Profile. circles2d.AddByCenterRadius(0, 0, 0.01); // Close the profile. profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed); // Arrays for AddSweptProtrusion(). listSections.Add(profile); listSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); listOrigins.Add(0); //Use 0 for closed profiles. // Create the extended protrusion. model = models.AddSweptProtrusion( listPaths.Count, listPaths.ToArray(), listPathTypes.ToArray(), listSections.Count, listSections.ToArray(), listSectionTypes.ToArray(), listOrigins.ToArray(), 0, SolidEdgePart.FeaturePropertyConstants.igLeft, SolidEdgePart.FeaturePropertyConstants.igNone, 0.0, null, SolidEdgePart.FeaturePropertyConstants.igNone, 0.0, null); // Hide profiles. sketchProfile.Visible = false; profile.Visible = false; return(model); }
public static void CreateHolesWithUserDefinedPattern(SolidEdgePart.PartDocument partDocument) { SolidEdgePart.RefPlanes refplanes = null; SolidEdgePart.RefPlane refplane = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; SolidEdgePart.HoleDataCollection holeDataCollection = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgePart.Holes2d holes2d = null; SolidEdgePart.Hole2d hole2d = null; SolidEdgePart.Holes holes = null; SolidEdgePart.Hole hole = null; long profileStatus = 0; List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>(); SolidEdgePart.UserDefinedPatterns userDefinedPatterns = null; SolidEdgePart.UserDefinedPattern userDefinedPattern = null; // Get a reference to the RefPlanes collection. refplanes = partDocument.RefPlanes; // Get a reference to front RefPlane. refplane = refplanes.GetFrontPlane(); List <double[]> linesArray = new List <double[]>(); linesArray.Add(new double[] { 0, 0, 0.08, 0 }); linesArray.Add(new double[] { 0.08, 0, 0.08, 0.06 }); linesArray.Add(new double[] { 0.08, 0.06, 0.064, 0.06 }); linesArray.Add(new double[] { 0.064, 0.06, 0.064, 0.02 }); linesArray.Add(new double[] { 0.064, 0.02, 0.048, 0.02 }); linesArray.Add(new double[] { 0.048, 0.02, 0.048, 0.06 }); linesArray.Add(new double[] { 0.048, 0.06, 0.032, 0.06 }); linesArray.Add(new double[] { 0.032, 0.06, 0.032, 0.02 }); linesArray.Add(new double[] { 0.032, 0.02, 0.016, 0.02 }); linesArray.Add(new double[] { 0.016, 0.02, 0.016, 0.06 }); linesArray.Add(new double[] { 0.016, 0.06, 0, 0.06 }); linesArray.Add(new double[] { 0, 0.06, 0, 0 }); // Call helper method to create the actual geometry. CreateFiniteExtrudedProtrusion(partDocument, refplane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.005); // Get a reference to the Models collection. models = partDocument.Models; // Get a reference to Model. model = models.Item(1); // Get a reference to the ProfileSets collection. profileSets = partDocument.ProfileSets; // Add new ProfileSet. profileSet = profileSets.Add(); // Get a reference to the Profiles collection. profiles = profileSet.Profiles; // Add new Profile. profile = profiles.Add(refplane); // Get a reference to the Holes2d collection. holes2d = profile.Holes2d; double[,] holeMatrix = new double[, ] { //{x, y} { 0.01, 0.01 }, { 0.02, 0.01 }, { 0.03, 0.01 }, { 0.04, 0.01 }, { 0.05, 0.01 }, { 0.06, 0.01 }, { 0.07, 0.01 } }; // Draw the Base Profile. for (int i = 0; i <= holeMatrix.GetUpperBound(0); i++) { // Add new Hole2d. hole2d = holes2d.Add( XCenter: holeMatrix[i, 0], YCenter: holeMatrix[i, 1]); } // Hide the profile. profile.Visible = false; // Close profile. profileStatus = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed); // Get a reference to the ProfileSet. profileSet = (SolidEdgePart.ProfileSet)profile.Parent; // Get a reference to the Profiles collection. profiles = profileSet.Profiles; // Add profiles to list for AddByProfiles(). for (int i = 1; i <= profiles.Count; i++) { profileList.Add(profiles.Item(i)); } // Get a reference to the HoleDataCollection collection. holeDataCollection = partDocument.HoleDataCollection; // Add new HoleData. SolidEdgePart.HoleData holeData = holeDataCollection.Add( HoleType: SolidEdgePart.FeaturePropertyConstants.igRegularHole, HoleDiameter: 0.005, BottomAngle: 90); // Get a reference to the Holes collection. holes = model.Holes; // Add hole. hole = holes.AddFinite( Profile: profile, ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight, FiniteDepth: 0.005, Data: holeData); // Get a reference to the UserDefinedPatterns collection. userDefinedPatterns = model.UserDefinedPatterns; // Create the user defined pattern. userDefinedPattern = userDefinedPatterns.AddByProfiles( NumberOfProfiles: profileList.Count, ProfilesArray: profileList.ToArray(), SeedFeature: hole); }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Model model = null; SolidEdgePart.ExtrudedProtrusions extrudedProtrusions = null; SolidEdgeFramework.SelectSet selectSet = null; SolidEdgePart.ExtrudedProtrusion extrudedProtrusion = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the RefPlanes collection. refPlanes = partDocument.RefPlanes; // Get a reference to a RefPlane. refPlane = refPlanes.GetFrontPlane(); List <double[]> linesArray = new List <double[]>(); linesArray.Add(new double[] { 0, 0, 0.08, 0 }); linesArray.Add(new double[] { 0.08, 0, 0.08, 0.06 }); linesArray.Add(new double[] { 0.08, 0.06, 0.064, 0.06 }); linesArray.Add(new double[] { 0.064, 0.06, 0.064, 0.02 }); linesArray.Add(new double[] { 0.064, 0.02, 0.048, 0.02 }); linesArray.Add(new double[] { 0.048, 0.02, 0.048, 0.06 }); linesArray.Add(new double[] { 0.048, 0.06, 0.032, 0.06 }); linesArray.Add(new double[] { 0.032, 0.06, 0.032, 0.02 }); linesArray.Add(new double[] { 0.032, 0.02, 0.016, 0.02 }); linesArray.Add(new double[] { 0.016, 0.02, 0.016, 0.06 }); linesArray.Add(new double[] { 0.016, 0.06, 0, 0.06 }); linesArray.Add(new double[] { 0, 0.06, 0, 0 }); // Call helper method to create the actual geometry. model = PartHelper.CreateFiniteExtrudedProtrusion(partDocument, refPlane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.005); // Get a reference to the ExtrudedProtrusions collection. extrudedProtrusions = model.ExtrudedProtrusions; // Get a reference to the new ExtrudedProtrusion. extrudedProtrusion = extrudedProtrusions.Item(1); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new protrusion to ActiveSelectSet. selectSet.Add(extrudedProtrusion); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Sketchs sketches = null; SolidEdgePart.Sketch sketch = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Circles2d circles2d = null; SolidEdgeFrameworkSupport.Circle2d circle2d = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the RefPlanes collection. refPlanes = partDocument.RefPlanes; // Get a reference to front RefPlane. refPlane = refPlanes.GetFrontPlane(); // Get a reference to the Sketches collection. sketches = partDocument.Sketches; // Create a new sketch. sketch = sketches.Add(); // Get a reference to the Profiles collection. profiles = sketch.Profiles; // Create a new profile. profile = profiles.Add(refPlane); circles2d = profile.Circles2d; circle2d = circles2d.AddByCenterRadius(0.04, 0.05, 0.02); profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new FaceRotate to ActiveSelectSet. selectSet.Add(circle2d); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; SolidEdgeGeometry.Body body = null; SolidEdgePart.FaceRotates faceRotates = null; SolidEdgePart.FaceRotate faceRotate = null; SolidEdgeGeometry.Faces faces = null; SolidEdgeGeometry.Face face = null; SolidEdgeGeometry.Vertices vertices = null; SolidEdgeGeometry.Vertex point1 = null; SolidEdgeGeometry.Vertex point2 = null; SolidEdgeFramework.SelectSet selectSet = null; double angle = 0.0872664625997165; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the Documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Get a reference to the RefPlanes collection. refPlanes = partDocument.RefPlanes; // Get a reference to a RefPlane. refPlane = refPlanes.GetFrontPlane(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); List <double[]> linesArray = new List <double[]>(); linesArray.Add(new double[] { 0, 0, 0.08, 0 }); linesArray.Add(new double[] { 0.08, 0, 0.08, 0.06 }); linesArray.Add(new double[] { 0.08, 0.06, 0.064, 0.06 }); linesArray.Add(new double[] { 0.064, 0.06, 0.064, 0.02 }); linesArray.Add(new double[] { 0.064, 0.02, 0.048, 0.02 }); linesArray.Add(new double[] { 0.048, 0.02, 0.048, 0.06 }); linesArray.Add(new double[] { 0.048, 0.06, 0.032, 0.06 }); linesArray.Add(new double[] { 0.032, 0.06, 0.032, 0.02 }); linesArray.Add(new double[] { 0.032, 0.02, 0.016, 0.02 }); linesArray.Add(new double[] { 0.016, 0.02, 0.016, 0.06 }); linesArray.Add(new double[] { 0.016, 0.06, 0, 0.06 }); linesArray.Add(new double[] { 0, 0.06, 0, 0 }); // Call helper method to create the actual geometry. PartHelper.CreateFiniteExtrudedProtrusion(partDocument, refPlane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.005); // Get a reference to the models collection. models = partDocument.Models; model = models.Item(1); body = (SolidEdgeGeometry.Body)model.Body; faces = (SolidEdgeGeometry.Faces)body.Faces[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll]; face = (SolidEdgeGeometry.Face)faces.Item(1); vertices = (SolidEdgeGeometry.Vertices)face.Vertices; point1 = (SolidEdgeGeometry.Vertex)vertices.Item(1); point2 = (SolidEdgeGeometry.Vertex)vertices.Item(2); faceRotates = model.FaceRotates; // Add face rotate. faceRotate = faceRotates.Add( face, SolidEdgePart.FaceRotateConstants.igFaceRotateByPoints, SolidEdgePart.FaceRotateConstants.igFaceRotateRecreateBlends, point1, point2, null, SolidEdgePart.FaceRotateConstants.igFaceRotateNone, angle); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new FaceRotate to ActiveSelectSet. selectSet.Add(faceRotate); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Sketchs sketches = null; SolidEdgePart.Sketch sketch = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Circles2d circles2d = null; SolidEdgeFrameworkSupport.Circle2d circle2d = null; SolidEdgePart.Constructions constructions = null; SolidEdgePart.ExtrudedSurfaces extrudedSurfaces = null; SolidEdgePart.ExtrudedSurface extrudedSurface = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the Documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the RefPlanes collection. refPlanes = partDocument.RefPlanes; // Get a reference to front RefPlane. refPlane = refPlanes.GetFrontPlane(); // Get a reference to the Sketches collection. sketches = partDocument.Sketches; // Create a new sketch. sketch = sketches.Add(); // Get a reference to the Profiles collection. profiles = sketch.Profiles; // Create a new profile. profile = profiles.Add(refPlane); circles2d = profile.Circles2d; circle2d = circles2d.AddByCenterRadius(0.04, 0.05, 0.02); profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed); // Get a reference to the Constructions collection. constructions = partDocument.Constructions; // Get a reference to the ExtrudedSurfaces collection. extrudedSurfaces = constructions.ExtrudedSurfaces; // These parameter variables are declared because we have to pass them as pointers. SolidEdgePart.KeyPointExtentConstants KeyPointFlags1 = SolidEdgePart.KeyPointExtentConstants.igTangentNormal; SolidEdgePart.KeyPointExtentConstants KeyPointFlags2 = SolidEdgePart.KeyPointExtentConstants.igTangentNormal; List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>(); for (int i = 1; i <= profiles.Count; i++) { profileList.Add(profiles.Item(i)); } Array profileArray = profileList.ToArray(); // Add a new ExtrudedSurface. extrudedSurface = extrudedSurfaces.Add( NumberOfProfiles: profileArray.Length, ProfileArray: ref profileArray, ExtentType1: SolidEdgePart.FeaturePropertyConstants.igFinite, ExtentSide1: SolidEdgePart.FeaturePropertyConstants.igRight, FiniteDepth1: 0.0127, KeyPointOrTangentFace1: null, KeyPointFlags1: ref KeyPointFlags1, FromFaceOrRefPlane: null, FromFaceOffsetSide: SolidEdgePart.OffsetSideConstants.seOffsetNone, FromFaceOffsetDistance: 0, TreatmentType1: SolidEdgePart.TreatmentTypeConstants.seTreatmentCrown, TreatmentDraftSide1: SolidEdgePart.DraftSideConstants.seDraftInside, TreatmentDraftAngle1: 0.1, TreatmentCrownType1: SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownByOffset, TreatmentCrownSide1: SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideInside, TreatmentCrownCurvatureSide1: SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureInside, TreatmentCrownRadiusOrOffset1: 0.003, TreatmentCrownTakeOffAngle1: 0, ExtentType2: SolidEdgePart.FeaturePropertyConstants.igFinite, ExtentSide2: SolidEdgePart.FeaturePropertyConstants.igLeft, FiniteDepth2: 0.0127, KeyPointOrTangentFace2: null, KeyPointFlags2: ref KeyPointFlags2, ToFaceOrRefPlane: null, ToFaceOffsetSide: SolidEdgePart.OffsetSideConstants.seOffsetNone, ToFaceOffsetDistance: 0, TreatmentType2: SolidEdgePart.TreatmentTypeConstants.seTreatmentCrown, TreatmentDraftSide2: SolidEdgePart.DraftSideConstants.seDraftNone, TreatmentDraftAngle2: 0, TreatmentCrownType2: SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownByOffset, TreatmentCrownSide2: SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideInside, TreatmentCrownCurvatureSide2: SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureInside, TreatmentCrownRadiusOrOffset2: 0.003, TreatmentCrownTakeOffAngle2: 0, WantEndCaps: true ); SolidEdgePart.FeaturePropertyConstants ExtentType; SolidEdgePart.FeaturePropertyConstants ExtentSide; double FiniteDepth = 0.0; SolidEdgePart.KeyPointExtentConstants KeyPointFlags = SolidEdgePart.KeyPointExtentConstants.igTangentNormal; // Get extent information for the first direction. extrudedSurface.GetDirection1Extent(out ExtentType, out ExtentSide, out FiniteDepth); // Modify parameters. FiniteDepth = 2.0; ExtentType = SolidEdgePart.FeaturePropertyConstants.igFinite; ExtentSide = SolidEdgePart.FeaturePropertyConstants.igRight; // Apply extent information for the first direction. extrudedSurface.ApplyDirection1Extent( ExtentType, ExtentSide, FiniteDepth, null, ref KeyPointFlags); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new FaceRotate to ActiveSelectSet. selectSet.Add(extrudedSurface); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Sketchs sketches = null; SolidEdgePart.Sketch sketch = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.BSplineCurves2d bsplineCurves2d = null; SolidEdgeFrameworkSupport.BSplineCurve2d bsplineCurve2d1 = null; SolidEdgeFrameworkSupport.BSplineCurve2d bsplineCurve2d2 = null; double startX = 0; double startY = 0; double endX = 0; double endY = 0; SolidEdgeFrameworkSupport.Arcs2d arcs2d = null; SolidEdgeFrameworkSupport.Arc2d arc2d = null; SolidEdgeFrameworkSupport.Relations2d relations2d = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the RefPlanes collection. refPlanes = partDocument.RefPlanes; // Get a reference to front RefPlane. refPlane = refPlanes.GetFrontPlane(); // Get a reference to the Sketches collection. sketches = partDocument.Sketches; // Create a new sketch. sketch = sketches.Add(); // Get a reference to the Profiles collection. profiles = sketch.Profiles; // Create a new profile. profile = profiles.Add(refPlane); // Get a reference to the BSplineCurves2d collection. bsplineCurves2d = profile.BSplineCurves2d; List <double> points = new List <double>(); points.Add(10.0 / 1000); points.Add(0.0 / 1000); points.Add(9.0 / 1000); points.Add(6.0 / 1000); points.Add(3.0 / 1000); points.Add(12.0 / 1000); // Create initial b-spline. bsplineCurve2d1 = bsplineCurves2d.AddByPoints( Order: 6, ArraySize: 3, Array: points.ToArray()); // Mirror initial b-spline. bsplineCurve2d2 = (SolidEdgeFrameworkSupport.BSplineCurve2d) bsplineCurve2d1.Mirror( x1: 0.0, y1: 1.0, x2: 0.0, y2: -1.0, BooleanCopyFlag: true); bsplineCurve2d1.GetNode( Index: bsplineCurve2d1.NodeCount, x: out startX, y: out startY); bsplineCurve2d2.GetNode( Index: bsplineCurve2d2.NodeCount, x: out endX, y: out endY); // Get a reference to the Arcs2d collection. arcs2d = profile.Arcs2d; // Draw arc to connect the two b-splines. arc2d = arcs2d.AddByCenterStartEnd( xCenter: 0.0, yCenter: 0.0, xStart: startX, yStart: startY, xEnd: endX, yEnd: endY); int endKeyPointIndex1 = GetBSplineCurves2dEndKeyPointIndex(bsplineCurve2d1); int endKeyPointIndex2 = GetBSplineCurves2dEndKeyPointIndex(bsplineCurve2d2); // Get a reference to the Relations2d collection. relations2d = (SolidEdgeFrameworkSupport.Relations2d) profile.Relations2d; // Connect BSplineCurve2d and arc. relations2d.AddKeypoint( Object1: bsplineCurve2d1, Index1: endKeyPointIndex1, Object2: arc2d, Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igArcStart); // Connect BSplineCurve2d and arc. relations2d.AddKeypoint( Object1: bsplineCurve2d2, Index1: endKeyPointIndex2, Object2: arc2d, Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igArcEnd); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.SheetMetalDocument sheetMetalDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Model model = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Lines2d lines2d = null; SolidEdgeFrameworkSupport.Line2d line2d = null; SolidEdgePart.Dimple dimple = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the Documents collection. documents = application.Documents; // Create a new sheetmetal document. sheetMetalDocument = documents.AddSheetMetalDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Call helper method to create the actual geometry. model = SheetMetalHelper.CreateBaseTabByCircle(sheetMetalDocument); // Get a reference to the RefPlanes collection. refPlanes = sheetMetalDocument.RefPlanes; // Get a reference to front RefPlane. refPlane = refPlanes.GetFrontPlane(); // Get a reference to the ProfileSets collection. profileSets = sheetMetalDocument.ProfileSets; // Add new ProfileSet. profileSet = profileSets.Add(); // Get a reference to the Profiles collection. profiles = profileSet.Profiles; // Add new Profile. profile = profiles.Add(refPlane); // Draw a line to define the dimple point. lines2d = profile.Lines2d; line2d = lines2d.AddBy2Points(0, 0, 0.01, 0); // Hide the profile. profile.Visible = false; double depth = 0.01; // Add new dimple. dimple = model.Dimples.Add( Profile: profile, Depth: depth, ProfileSide: SolidEdgePart.DimpleFeatureConstants.seDimpleDepthLeft, DepthSide: SolidEdgePart.DimpleFeatureConstants.seDimpleDepthRight); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new Dimple to ActiveSelectSet. selectSet.Add(dimple); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; SolidEdgeGeometry.Body body = null; SolidEdgeGeometry.Faces faces = null; SolidEdgeGeometry.Face face = null; SolidEdgePart.Thickens thickens = null; SolidEdgePart.Thicken thicken = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Add a new part document. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the RefPlanes collection. refPlanes = partDocument.RefPlanes; // Get a reference to a RefPlane. refPlane = refPlanes.GetFrontPlane(); List <double[]> linesArray = new List <double[]>(); linesArray.Add(new double[] { 0, 0, 0.08, 0 }); linesArray.Add(new double[] { 0.08, 0, 0.08, 0.06 }); linesArray.Add(new double[] { 0.08, 0.06, 0.064, 0.06 }); linesArray.Add(new double[] { 0.064, 0.06, 0.064, 0.02 }); linesArray.Add(new double[] { 0.064, 0.02, 0.048, 0.02 }); linesArray.Add(new double[] { 0.048, 0.02, 0.048, 0.06 }); linesArray.Add(new double[] { 0.048, 0.06, 0.032, 0.06 }); linesArray.Add(new double[] { 0.032, 0.06, 0.032, 0.02 }); linesArray.Add(new double[] { 0.032, 0.02, 0.016, 0.02 }); linesArray.Add(new double[] { 0.016, 0.02, 0.016, 0.06 }); linesArray.Add(new double[] { 0.016, 0.06, 0, 0.06 }); linesArray.Add(new double[] { 0, 0.06, 0, 0 }); // Get a reference to the models collection. models = partDocument.Models; // Call helper method to create the actual geometry. model = PartHelper.CreateFiniteExtrudedProtrusion(partDocument, refPlane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.005); body = (SolidEdgeGeometry.Body)model.Body; faces = (SolidEdgeGeometry.Faces)body.Faces[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll]; thickens = model.Thickens; Type type = typeof(SolidEdgePart.FeaturePropertyConstants); var fields = type.GetFields(); for (int i = 1; i <= faces.Count; i++) { model = models.Item(1); body = (SolidEdgeGeometry.Body)model.Body; faces = (SolidEdgeGeometry.Faces)body.Faces[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll]; thickens = model.Thickens; face = faces.Item(i) as SolidEdgeGeometry.Face; Array facesArray = Array.CreateInstance(typeof(SolidEdgeGeometry.Face), 1); facesArray.SetValue(face, 0); foreach (var field in fields) { if (field.IsSpecialName) { continue; } SolidEdgePart.FeaturePropertyConstants side = (SolidEdgePart.FeaturePropertyConstants)field.GetRawConstantValue(); try { thicken = thickens.Add(side, 0.0254, 1, ref facesArray); thicken.Delete(); break; } catch { } } //thicken = thickens.Add(SolidEdgePart.FeaturePropertyConstants.igReverseNormalSideDummy, 0.0254, 1, ref facesArray); //selectSet = application.ActiveSelectSet; //selectSet.RemoveAll(); //selectSet.Add(faces.Item(1)); } } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; SolidEdgePart.Sketchs sketches = null; SolidEdgePart.Sketch sketch = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile sketchProfile = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Circles2d circles2d = null; List <SolidEdgePart.Profile> listPaths = new List <SolidEdgePart.Profile>(); List <SolidEdgePart.FeaturePropertyConstants> listPathTypes = new List <SolidEdgePart.FeaturePropertyConstants>(); List <SolidEdgePart.Profile> listSections = new List <SolidEdgePart.Profile>(); List <SolidEdgePart.FeaturePropertyConstants> listSectionTypes = new List <SolidEdgePart.FeaturePropertyConstants>(); List <int> listOrigins = new List <int>(); try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the Documents collection. documents = application.Documents; // Create a new PartDocument. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the models collection. models = (SolidEdgePart.Models)partDocument.Models; // Get a reference to the Sketches collections. sketches = (SolidEdgePart.Sketchs)partDocument.Sketches; // Get a reference to the profile sets collection. profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets; // Get a reference to the ref planes collection. refPlanes = (SolidEdgePart.RefPlanes)partDocument.RefPlanes; // Get a reference to front RefPlane. refPlane = refPlanes.GetFrontPlane(); // Add a new sketch. sketch = (SolidEdgePart.Sketch)sketches.Add(); // Add profile for sketch on specified refplane. sketchProfile = sketch.Profiles.Add(refPlane); // Get a reference to the Circles2d collection. circles2d = sketchProfile.Circles2d; // Draw the Base Profile. circles2d.AddByCenterRadius(0, 0, 0.02); // Close the profile. sketchProfile.End(SolidEdgePart.ProfileValidationType.igProfileClosed); // Arrays for AddSweptProtrusion(). listPaths.Add(sketchProfile); listPathTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); // NOTE: profile is the Curve. refPlane = refPlanes.AddNormalToCurve( sketchProfile, SolidEdgePart.ReferenceElementConstants.igCurveEnd, refPlanes.GetFrontPlane(), SolidEdgePart.ReferenceElementConstants.igPivotEnd, true, System.Reflection.Missing.Value); // Add a new profile set. profileSet = (SolidEdgePart.ProfileSet)profileSets.Add(); // Get a reference to the profiles collection. profiles = (SolidEdgePart.Profiles)profileSet.Profiles; // add a new profile. profile = (SolidEdgePart.Profile)profiles.Add(refPlane); // Get a reference to the Circles2d collection. circles2d = profile.Circles2d; // Draw the Base Profile. circles2d.AddByCenterRadius(0, 0, 0.01); // Close the profile. profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed); // Arrays for AddSweptProtrusion(). listSections.Add(profile); listSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); listOrigins.Add(0); //Use 0 for closed profiles. // Create the extended protrusion. model = models.AddSweptProtrusion( listPaths.Count, listPaths.ToArray(), listPathTypes.ToArray(), listSections.Count, listSections.ToArray(), listSectionTypes.ToArray(), listOrigins.ToArray(), 0, SolidEdgePart.FeaturePropertyConstants.igLeft, SolidEdgePart.FeaturePropertyConstants.igNone, 0.0, null, SolidEdgePart.FeaturePropertyConstants.igNone, 0.0, null); // Hide profiles. sketchProfile.Visible = false; profile.Visible = false; // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }