static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.Sketchs sketches = null;
SolidEdgePart.Sketch sketch = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
SolidEdgeFrameworkSupport.Circle2d circle2d = null;
SolidEdgePart.Constructions constructions = null;
SolidEdgePart.ExtrudedSurfaces extrudedSurfaces = null;
SolidEdgePart.ExtrudedSurface extrudedSurface = null;
SolidEdgeFramework.SelectSet selectSet = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the Documents collection.
documents = application.Documents;
// Create a new part document.
partDocument = documents.AddPartDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
// Get a reference to the RefPlanes collection.
refPlanes = partDocument.RefPlanes;
// Get a reference to front RefPlane.
refPlane = refPlanes.GetFrontPlane();
// Get a reference to the Sketches collection.
sketches = partDocument.Sketches;
// Create a new sketch.
sketch = sketches.Add();
// Get a reference to the Profiles collection.
profiles = sketch.Profiles;
// Create a new profile.
profile = profiles.Add(refPlane);
circles2d = profile.Circles2d;
circle2d = circles2d.AddByCenterRadius(0.04, 0.05, 0.02);
profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Get a reference to the Constructions collection.
constructions = partDocument.Constructions;
// Get a reference to the ExtrudedSurfaces collection.
extrudedSurfaces = constructions.ExtrudedSurfaces;
// These parameter variables are declared because we have to pass them as pointers.
SolidEdgePart.KeyPointExtentConstants KeyPointFlags1 = SolidEdgePart.KeyPointExtentConstants.igTangentNormal;
SolidEdgePart.KeyPointExtentConstants KeyPointFlags2 = SolidEdgePart.KeyPointExtentConstants.igTangentNormal;
List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
for (int i = 1; i <= profiles.Count; i++)
{
profileList.Add(profiles.Item(i));
}
Array profileArray = profileList.ToArray();
// Add a new ExtrudedSurface.
extrudedSurface = extrudedSurfaces.Add(
NumberOfProfiles: profileArray.Length,
ProfileArray: ref profileArray,
ExtentType1: SolidEdgePart.FeaturePropertyConstants.igFinite,
ExtentSide1: SolidEdgePart.FeaturePropertyConstants.igRight,
FiniteDepth1: 0.0127,
KeyPointOrTangentFace1: null,
KeyPointFlags1: ref KeyPointFlags1,
FromFaceOrRefPlane: null,
FromFaceOffsetSide: SolidEdgePart.OffsetSideConstants.seOffsetNone,
FromFaceOffsetDistance: 0,
TreatmentType1: SolidEdgePart.TreatmentTypeConstants.seTreatmentCrown,
TreatmentDraftSide1: SolidEdgePart.DraftSideConstants.seDraftInside,
TreatmentDraftAngle1: 0.1,
TreatmentCrownType1: SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownByOffset,
TreatmentCrownSide1: SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideInside,
TreatmentCrownCurvatureSide1: SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureInside,
TreatmentCrownRadiusOrOffset1: 0.003,
TreatmentCrownTakeOffAngle1: 0,
ExtentType2: SolidEdgePart.FeaturePropertyConstants.igFinite,
ExtentSide2: SolidEdgePart.FeaturePropertyConstants.igLeft,
FiniteDepth2: 0.0127,
KeyPointOrTangentFace2: null,
KeyPointFlags2: ref KeyPointFlags2,
ToFaceOrRefPlane: null,
ToFaceOffsetSide: SolidEdgePart.OffsetSideConstants.seOffsetNone,
ToFaceOffsetDistance: 0,
TreatmentType2: SolidEdgePart.TreatmentTypeConstants.seTreatmentCrown,
TreatmentDraftSide2: SolidEdgePart.DraftSideConstants.seDraftNone,
TreatmentDraftAngle2: 0,
TreatmentCrownType2: SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownByOffset,
TreatmentCrownSide2: SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideInside,
TreatmentCrownCurvatureSide2: SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureInside,
TreatmentCrownRadiusOrOffset2: 0.003,
TreatmentCrownTakeOffAngle2: 0,
WantEndCaps: true
);
SolidEdgePart.FeaturePropertyConstants ExtentType;
SolidEdgePart.FeaturePropertyConstants ExtentSide;
double FiniteDepth = 0.0;
SolidEdgePart.KeyPointExtentConstants KeyPointFlags = SolidEdgePart.KeyPointExtentConstants.igTangentNormal;
// Get extent information for the first direction.
extrudedSurface.GetDirection1Extent(out ExtentType, out ExtentSide, out FiniteDepth);
// Modify parameters.
FiniteDepth = 2.0;
ExtentType = SolidEdgePart.FeaturePropertyConstants.igFinite;
ExtentSide = SolidEdgePart.FeaturePropertyConstants.igRight;
// Apply extent information for the first direction.
extrudedSurface.ApplyDirection1Extent(
ExtentType,
ExtentSide,
FiniteDepth,
null,
ref KeyPointFlags);
// Get a reference to the ActiveSelectSet.
selectSet = application.ActiveSelectSet;
// Empty ActiveSelectSet.
selectSet.RemoveAll();
// Add new FaceRotate to ActiveSelectSet.
selectSet.Add(extrudedSurface);
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.Models models = null;
SolidEdgeGeometry.Body body = null;
SolidEdgeGeometry.Shells shells = null;
SolidEdgeGeometry.Shell shell = null;
SolidEdgePart.Constructions constructions = null;
SolidEdgePart.ConstructionModel constructionModel = null;
int bodyCount = 0;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Bring Solid Edge to the foreground.
application.Activate();
// Get a reference to the active part document.
partDocument = application.GetActiveDocument <SolidEdgePart.PartDocument>(false);
if (partDocument != null)
{
models = partDocument.Models;
// Check for solid design bodies.
foreach (var model in models.OfType <SolidEdgePart.Model>())
{
body = (SolidEdgeGeometry.Body)model.Body;
if (body.IsSolid)
{
shells = (SolidEdgeGeometry.Shells)body.Shells;
for (int i = 1; i <= shells.Count; i++)
{
shell = (SolidEdgeGeometry.Shell)shells.Item(i);
if (shell != null)
{
if ((shell.IsClosed) && (shell.IsVoid == false))
{
bodyCount++;
}
}
}
}
}
// Check for solid construction bodies.
constructions = partDocument.Constructions;
for (int i = 1; i <= constructions.Count; i++)
{
constructionModel = constructions.Item(i) as SolidEdgePart.ConstructionModel;
if (constructionModel != null)
{
body = (SolidEdgeGeometry.Body)constructionModel.Body;
if (body.IsSolid)
{
bodyCount++;
}
}
}
Console.WriteLine("Active part document contains ({0}) solid bodies.", bodyCount);
}
else
{
throw new System.Exception("No active document.");
}
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
