static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeDraft.DraftDocument draftDocument = null; SolidEdgeDraft.Sheet sheet = null; SolidEdgeFrameworkSupport.DrawingObjects drawingObjects = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the active draft document. draftDocument = application.GetActiveDocument <SolidEdgeDraft.DraftDocument>(); // Get a reference to the active Sheet. sheet = draftDocument.ActiveSheet; // Get a reference to the drawing objects collection. drawingObjects = sheet.DrawingObjects; // Disable screen updating for performance. application.ScreenUpdating = false; // Loop until count is 0. while (drawingObjects.Count > 0) { // Leverage dynamic keyword to allow invoking Delete() method. dynamic drawingObject = drawingObjects.Item(1); if (drawingObject is SolidEdgeDraft.TablePage) { // TablePage does not have a Delete() method but its parent does. dynamic drawingObjectParent = drawingObject.Parent; drawingObjectParent.Delete(); } else { drawingObject.Delete(); } } // Turn screen updating back on. application.ScreenUpdating = true; // Fit the view. application.StartCommand(SolidEdgeConstants.DetailCommandConstants.DetailViewFit); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.SheetMetalDocument sheetMetalDocument = null; SolidEdgePart.Model model = null; SolidEdgePart.Tabs tabs = null; SolidEdgePart.Tab tab = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Bring Solid Edge to the foreground. application.Activate(); // Get a reference to the Documents collection. documents = application.Documents; // Create a new SheetMetal document. sheetMetalDocument = documents.AddSheetMetalDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Call helper method to create the actual geometry. model = SheetMetalHelper.CreateBaseTab(sheetMetalDocument); // Get a reference to the Tabs collection. tabs = model.Tabs; // Get a reference to the new Tab. tab = tabs.Item(1); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new Tab to ActiveSelectSet. selectSet.Add(tab); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; try { Console.WriteLine("Registering OleMessageFilter."); // Register with OLE to handle concurrency issues on the current thread. OleMessageFilter.Register(); Console.WriteLine("Connecting to Solid Edge."); // Connect to or start Solid Edge. application = SolidEdgeUtils.Connect(true); // Make sure user can see the GUI. application.Visible = true; // Bring Solid Edge to the foreground. application.Activate(); // Get a reference to the documents collection. documents = application.Documents; Console.WriteLine("Creating a new part document."); // Create a new part document. partDocument = (SolidEdgePart.PartDocument) documents.Add("SolidEdge.PartDocument"); // Always a good idea to give SE a chance to breathe. application.DoIdle(); Console.WriteLine("Creating geometry."); // Create geometry. CreateFiniteExtrudedProtrusion(partDocument); Console.WriteLine("Creating holes with user defined patterns."); // Create holes. CreateHolesWithUserDefinedPattern(partDocument); Console.WriteLine("Switching to ISO view."); // Switch to ISO view. application.StartCommand((SolidEdgeFramework.SolidEdgeCommandConstants)SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { #if DEBUG System.Diagnostics.Debugger.Break(); #endif Console.WriteLine(ex.Message); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.Model model = null; SolidEdgePart.RevolvedProtrusions revolvedProtrusions = null; SolidEdgePart.RevolvedProtrusion revolvedProtrusion = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the Documents collection. documents = application.Documents; // Create a new PartDocument. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Call helper method to create the actual geometry. model = PartHelper.CreateFiniteRevolvedProtrusion(partDocument); // Get a reference to the RevolvedProtrusions collection. revolvedProtrusions = model.RevolvedProtrusions; // Get a reference to the new RevolvedProtrusion. revolvedProtrusion = revolvedProtrusions.Item(1); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new RevolvedProtrusion to ActiveSelectSet. selectSet.Add(revolvedProtrusion); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgeAssembly.AssemblyDocument assemblyDocument = null; try { Console.WriteLine("Registering OleMessageFilter."); // Register with OLE to handle concurrency issues on the current thread. OleMessageFilter.Register(); Console.WriteLine("Connecting to Solid Edge."); // Connect to or start Solid Edge. application = SolidEdgeUtils.Connect(true); // Make sure user can see the GUI. application.Visible = true; // Bring Solid Edge to the foreground. application.Activate(); // Get a reference to the documents collection. documents = application.Documents; Console.WriteLine("Creating a new assembly document."); // Create a new assembly document. assemblyDocument = (SolidEdgeAssembly.AssemblyDocument) documents.Add("SolidEdge.AssemblyDocument"); // Always a good idea to give SE a chance to breathe. application.DoIdle(); AddStructuralFrame(assemblyDocument); Console.WriteLine("Switching to ISO view."); // Switch to ISO view. application.StartCommand( (SolidEdgeFramework.SolidEdgeCommandConstants) SolidEdgeConstants.AssemblyCommandConstants.AssemblyViewISOView); } catch (System.Exception ex) { #if DEBUG System.Diagnostics.Debugger.Break(); #endif Console.WriteLine(ex.Message); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgeAssembly.AssemblyDocument assemblyDocument = null; SolidEdgeAssembly.Occurrences occurrences = null; SolidEdgeAssembly.Occurrence occurrence = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new assembly document. assemblyDocument = documents.AddAssemblyDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the Occurrences collection. occurrences = assemblyDocument.Occurrences; // Build path to file. string filename = System.IO.Path.Combine(SolidEdgeCommunity.SolidEdgeUtils.GetTrainingFolderPath(), "Coffee Pot.par"); // Add the base feature at 0 (X), 0 (Y), 0 (Z). occurrence = occurrences.AddByFilename(filename); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.AssemblyCommandConstants.AssemblyViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Lines2d lines2d = null; SolidEdgeFrameworkSupport.Line2d line2d = null; SolidEdgeFrameworkSupport.Relations2d relations2d = null; SolidEdgeFrameworkSupport.Relation2d relation2d = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>(); int status = 0; SolidEdgePart.ExtrudedProtrusions extrudedProtrusions = null; SolidEdgePart.ExtrudedProtrusion extrudedProtrusion = null; SolidEdgeGeometry.Edges edges = null; List <object> edgeList = new List <object>(); SolidEdgeGeometry.Faces faces = null; SolidEdgePart.Chamfers chamfers = null; SolidEdgePart.Chamfer chamfer = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Bring Solid Edge to the foreground. application.Activate(); // Get a reference to the documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); refPlanes = partDocument.RefPlanes; refPlane = refPlanes.Item(1); profileSets = partDocument.ProfileSets; profileSet = profileSets.Add(); profiles = profileSet.Profiles; profile = profiles.Add(refPlane); profileList.Add(profile); lines2d = profile.Lines2d; line2d = lines2d.AddBy2Points(0, 0, 0.06, 0); line2d = lines2d.AddBy2Points(0.06, 0, 0.06, 0.06); line2d = lines2d.AddBy2Points(0.06, 0.06, 0, 0.06); line2d = lines2d.AddBy2Points(0, 0.06, 0, 0); relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d; relation2d = relations2d.AddKeypoint( Object1: lines2d.Item(1), Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, Object2: lines2d.Item(2), Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relation2d = relations2d.AddKeypoint( Object1: lines2d.Item(2), Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, Object2: lines2d.Item(3), Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relation2d = relations2d.AddKeypoint( Object1: lines2d.Item(3), Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, Object2: lines2d.Item(4), Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relation2d = relations2d.AddKeypoint( Object1: lines2d.Item(4), Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, Object2: lines2d.Item(1), Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); // Make sure profile is closed. status = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed); if (status != 0) { throw new System.Exception("Profile not closed."); } models = partDocument.Models; model = models.AddFiniteExtrudedProtrusion( NumberOfProfiles: profileList.Count, ProfileArray: profileList.ToArray(), ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight, ExtrusionDistance: 0.02); profile.Visible = false; extrudedProtrusions = model.ExtrudedProtrusions; extrudedProtrusion = extrudedProtrusions.Item(1); //edges = (SolidEdgeGeometry.Edges)extrudedProtrusion.get_Edges( // SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll); //edgeList.Add(edges.Item(5)); //edgeList.Add(edges.Item(8)); faces = (SolidEdgeGeometry.Faces) extrudedProtrusion.get_Faces(SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll); chamfers = model.Chamfers; SolidEdgeGeometry.Face face = (SolidEdgeGeometry.Face)faces.Item(1); double setbackDistance1 = 0.009; double setbackDistance2 = 0.001; edges = (SolidEdgeGeometry.Edges)face.Edges; edgeList.Add(edges.Item(1)); chamfer = chamfers.AddUnequalSetback( ReferenceFace: face, NumberOfEdgeSets: edgeList.Count, EdgeSetArray: edgeList.ToArray(), SetbackDistance1: setbackDistance1, SetbackDistance2: setbackDistance2); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.SheetMetalDocument sheetMetalDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Sketchs sketchs = null; SolidEdgePart.Sketch sketch = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Circles2d circles2d = null; SolidEdgeFrameworkSupport.Circle2d circle2d = null; SolidEdgePart.Model model = null; SolidEdgePart.ExtrudedCutouts extrudedCutouts = null; SolidEdgePart.ExtrudedCutout extrudedCutout = null; List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>(); double finiteDepth1 = 0.5; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the Documents collection. documents = application.Documents; // Create a new sheetmetal document. sheetMetalDocument = documents.AddSheetMetalDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Call helper method to create the actual geometry. model = SheetMetalHelper.CreateBaseTabByCircle(sheetMetalDocument); // Get a reference to the RefPlanes collection. refPlanes = sheetMetalDocument.RefPlanes; // Get a reference to right RefPlane. refPlane = refPlanes.GetRightPlane(); // Get a reference to the Sketches collection. sketchs = sheetMetalDocument.Sketches; // Add a new Sketch. sketch = sketchs.Add(); // Get a reference to the Profiles collection. profiles = sketch.Profiles; // Add a new Profile. profile = profiles.Add(refPlane); profileList.Add(profile); // Create 2D circle. circles2d = profile.Circles2d; circle2d = circles2d.AddByCenterRadius(0, 0, 0.025); profile.Visible = false; // Get a reference to the ExtrudedCutouts collection. extrudedCutouts = model.ExtrudedCutouts; // Add a new ExtrudedCutout. extrudedCutout = extrudedCutouts.Add( profileList.Count, profileList.ToArray(), SolidEdgePart.FeaturePropertyConstants.igLeft, SolidEdgePart.FeaturePropertyConstants.igFinite, SolidEdgePart.FeaturePropertyConstants.igSymmetric, finiteDepth1, null, SolidEdgePart.KeyPointExtentConstants.igTangentNormal, null, SolidEdgePart.OffsetSideConstants.seOffsetNone, 0, SolidEdgePart.TreatmentTypeConstants.seTreatmentNone, SolidEdgePart.DraftSideConstants.seDraftNone, 0, SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownNone, SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideNone, SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureNone, 0, 0, SolidEdgePart.FeaturePropertyConstants.igNone, SolidEdgePart.FeaturePropertyConstants.igNone, 0, null, SolidEdgePart.KeyPointExtentConstants.igTangentNormal, null, SolidEdgePart.OffsetSideConstants.seOffsetNone, 0, SolidEdgePart.TreatmentTypeConstants.seTreatmentNone, SolidEdgePart.DraftSideConstants.seDraftNone, 0, SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownNone, SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideNone, SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureNone, 0, 0); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new ExtrudedCutout to ActiveSelectSet. selectSet.Add(extrudedCutout); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgeAssembly.AssemblyDocument assemblyDocument = null; SolidEdgeAssembly.Occurrences occurrences = null; SolidEdgeAssembly.Occurrence occurrence = null; string[] filenames = { "strainer.asm", "handle.par" }; // Jagged array // {OriginX, OriginY, OriginZ, AngleX, AngleY, AngleZ} // Origin in meters. // Angle in radians. double[][] transforms = new double[][] { new double[] { 0, 0, 0.02062, 0, 0, 0 }, new double[] { -0.06943, -0.00996, 0.05697, 0, 0, 0 }, }; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new assembly document. assemblyDocument = documents.AddAssemblyDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the Occurrences collection. occurrences = assemblyDocument.Occurrences; // Get path to Solid Edge training directory. Typically, 'C:\Program Files\Solid Edge XXX\Training'. DirectoryInfo trainingDirectory = new DirectoryInfo(SolidEdgeCommunity.SolidEdgeUtils.GetTrainingFolderPath()); // Add each occurrence in array. for (int i = 0; i < transforms.Length; i++) { // Build path to file. string filename = Path.Combine(trainingDirectory.FullName, filenames[i]); // Add the new occurrence using a transform. occurrence = occurrences.AddWithTransform( OccurrenceFileName: filename, OriginX: transforms[i][0], OriginY: transforms[i][1], OriginZ: transforms[i][2], AngleX: transforms[i][3], AngleY: transforms[i][4], AngleZ: transforms[i][5]); } // Switch to ISO view. application.StartCommand(SolidEdgeConstants.AssemblyCommandConstants.AssemblyViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; SolidEdgeGeometry.Body body = null; SolidEdgePart.FaceRotates faceRotates = null; SolidEdgePart.FaceRotate faceRotate = null; SolidEdgeGeometry.Faces faces = null; SolidEdgeGeometry.Face face = null; SolidEdgeGeometry.Vertices vertices = null; SolidEdgeGeometry.Vertex point1 = null; SolidEdgeGeometry.Vertex point2 = null; SolidEdgeFramework.SelectSet selectSet = null; double angle = 0.0872664625997165; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the Documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Get a reference to the RefPlanes collection. refPlanes = partDocument.RefPlanes; // Get a reference to a RefPlane. refPlane = refPlanes.GetFrontPlane(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); List <double[]> linesArray = new List <double[]>(); linesArray.Add(new double[] { 0, 0, 0.08, 0 }); linesArray.Add(new double[] { 0.08, 0, 0.08, 0.06 }); linesArray.Add(new double[] { 0.08, 0.06, 0.064, 0.06 }); linesArray.Add(new double[] { 0.064, 0.06, 0.064, 0.02 }); linesArray.Add(new double[] { 0.064, 0.02, 0.048, 0.02 }); linesArray.Add(new double[] { 0.048, 0.02, 0.048, 0.06 }); linesArray.Add(new double[] { 0.048, 0.06, 0.032, 0.06 }); linesArray.Add(new double[] { 0.032, 0.06, 0.032, 0.02 }); linesArray.Add(new double[] { 0.032, 0.02, 0.016, 0.02 }); linesArray.Add(new double[] { 0.016, 0.02, 0.016, 0.06 }); linesArray.Add(new double[] { 0.016, 0.06, 0, 0.06 }); linesArray.Add(new double[] { 0, 0.06, 0, 0 }); // Call helper method to create the actual geometry. PartHelper.CreateFiniteExtrudedProtrusion(partDocument, refPlane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.005); // Get a reference to the models collection. models = partDocument.Models; model = models.Item(1); body = (SolidEdgeGeometry.Body)model.Body; faces = (SolidEdgeGeometry.Faces)body.Faces[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll]; face = (SolidEdgeGeometry.Face)faces.Item(1); vertices = (SolidEdgeGeometry.Vertices)face.Vertices; point1 = (SolidEdgeGeometry.Vertex)vertices.Item(1); point2 = (SolidEdgeGeometry.Vertex)vertices.Item(2); faceRotates = model.FaceRotates; // Add face rotate. faceRotate = faceRotates.Add( face, SolidEdgePart.FaceRotateConstants.igFaceRotateByPoints, SolidEdgePart.FaceRotateConstants.igFaceRotateRecreateBlends, point1, point2, null, SolidEdgePart.FaceRotateConstants.igFaceRotateNone, angle); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new FaceRotate to ActiveSelectSet. selectSet.Add(faceRotate); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgePart.SheetMetalDocument sheetMetalDocument = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; double density = 0; double accuracy = 0; double volume = 0; double area = 0; double mass = 0; Array cetnerOfGravity = Array.CreateInstance(typeof(double), 3); Array centerOfVolumne = Array.CreateInstance(typeof(double), 3); Array globalMomentsOfInteria = Array.CreateInstance(typeof(double), 6); // Ixx, Iyy, Izz, Ixy, Ixz and Iyz Array principalMomentsOfInteria = Array.CreateInstance(typeof(double), 3); // Ixx, Iyy and Izz Array principalAxes = Array.CreateInstance(typeof(double), 9); // 3 axes x 3 coords Array radiiOfGyration = Array.CreateInstance(typeof(double), 9); // 3 axes x 3 coords double relativeAccuracyAchieved = 0; int status = 0; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the active document. sheetMetalDocument = application.GetActiveDocument <SolidEdgePart.SheetMetalDocument>(false); if (sheetMetalDocument != null) { density = 1; accuracy = 0.05; // Get a reference to the Models collection. models = sheetMetalDocument.Models; // Get a reference to the Model. model = models.Item(1); // Compute the physical properties. model.ComputePhysicalProperties( Density: density, Accuracy: accuracy, Volume: out volume, Area: out area, Mass: out mass, CenterOfGravity: ref cetnerOfGravity, CenterOfVolume: ref centerOfVolumne, GlobalMomentsOfInteria: ref globalMomentsOfInteria, PrincipalMomentsOfInteria: ref principalMomentsOfInteria, PrincipalAxes: ref principalAxes, RadiiOfGyration: ref radiiOfGyration, RelativeAccuracyAchieved: out relativeAccuracyAchieved, Status: out status); Console.WriteLine("ComputePhysicalProperties() results:"); // Write results to screen. Console.WriteLine("Density: {0}", density); Console.WriteLine("Accuracy: {0}", accuracy); Console.WriteLine("Volume: {0}", volume); Console.WriteLine("Area: {0}", area); Console.WriteLine("Mass: {0}", mass); // Convert from System.Array to double[]. double[] is easier to work with. double[] m = cetnerOfGravity.OfType <double>().ToArray(); Console.WriteLine("CenterOfGravity:"); Console.WriteLine("\t|{0}, {1}, {2}|", m[0], m[1], m[2]); m = centerOfVolumne.OfType <double>().ToArray(); Console.WriteLine("CenterOfVolume:"); Console.WriteLine("\t|{0}, {1}, {2}|", m[0], m[1], m[2]); m = globalMomentsOfInteria.OfType <double>().ToArray(); Console.WriteLine("GlobalMomentsOfInteria:"); Console.WriteLine("\t|{0}, {1}, {2}|", m[0], m[1], m[2]); Console.WriteLine("\t|{0}, {1}, {2}|", m[3], m[4], m[5]); m = principalMomentsOfInteria.OfType <double>().ToArray(); Console.WriteLine("PrincipalMomentsOfInteria:"); Console.WriteLine("\t|{0}, {1}, {2}|", m[0], m[1], m[2]); m = principalAxes.OfType <double>().ToArray(); Console.WriteLine("PrincipalAxes:"); Console.WriteLine("\t|{0}, {1}, {2}|", m[0], m[1], m[2]); Console.WriteLine("\t|{0}, {1}, {2}|", m[3], m[4], m[5]); Console.WriteLine("\t|{0}, {1}, {2}|", m[6], m[7], m[8]); m = radiiOfGyration.OfType <double>().ToArray(); Console.WriteLine("RadiiOfGyration:"); Console.WriteLine("\t|{0}, {1}, {2}|", m[0], m[1], m[2]); Console.WriteLine("\t|{0}, {1}, {2}|", m[3], m[4], m[5]); Console.WriteLine("\t|{0}, {1}, {2}|", m[6], m[7], m[8]); Console.WriteLine("RelativeAccuracyAchieved: {0}", relativeAccuracyAchieved); Console.WriteLine("Status: {0}", status); Console.WriteLine(); // Show physical properties window. application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalToolsPhysicalProperties); } else { throw new System.Exception("No active document."); } } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgeAssembly.AssemblyDocument assemblyDocument = null; SolidEdgeAssembly.Occurrences occurrences = null; SolidEdgeAssembly.Occurrence occurrence = null; // A single-dimension array that defines a valid transformation matrix. double[] matrix = { 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.07913, 1.0 }; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new assembly document. assemblyDocument = documents.AddAssemblyDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Build path to part file. string filename = System.IO.Path.Combine(SolidEdgeCommunity.SolidEdgeUtils.GetTrainingFolderPath(), "Strap Handle.par"); // Get a reference to the Occurrences collection. occurrences = assemblyDocument.Occurrences; // Convert from double[] to System.Array. Array matrixArray = matrix; // Add the new occurrence using a matrix. occurrence = occurrences.AddWithMatrix( OccurrenceFileName: filename, Matrix: ref matrixArray); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.AssemblyCommandConstants.AssemblyViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; try { Console.WriteLine("Registering OleMessageFilter."); // Register with OLE to handle concurrency issues on the current thread. OleMessageFilter.Register(); Console.WriteLine("Connecting to Solid Edge."); // Connect to or start Solid Edge. application = SolidEdgeUtils.Connect(true); // Make sure user can see the GUI. application.Visible = true; // Bring Solid Edge to the foreground. application.Activate(); // Get a reference to the documents collection. documents = application.Documents; Console.WriteLine("Creating a new part document."); // Create a new part document. partDocument = (SolidEdgePart.PartDocument) documents.Add("SolidEdge.PartDocument"); // Always a good idea to give SE a chance to breathe. application.DoIdle(); Console.WriteLine("Drawing part."); // Create geometry. CreateFiniteExtrudedProtrusion(partDocument); Console.WriteLine(); // Physical properties have not yet been computed for this model // so all values will be 0 with a status of 2. GetPhysicalProperties(partDocument, false); // This time, we will compute the physical properties of the model. GetPhysicalProperties(partDocument, true); Console.WriteLine("Switching to ISO view."); // Switch to ISO view. application.StartCommand((SolidEdgeFramework.SolidEdgeCommandConstants)SolidEdgeConstants.PartCommandConstants.PartViewISOView); // Show physical properties window. application.StartCommand((SolidEdgeFramework.SolidEdgeCommandConstants)SolidEdgeConstants.PartCommandConstants.PartToolsPhysicalProperties); } catch (System.Exception ex) { #if DEBUG System.Diagnostics.Debugger.Break(); #endif Console.WriteLine(ex.Message); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.SheetMetalDocument sheetMetalDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgeFramework.SelectSet selectSet = null; Array features = Array.CreateInstance(typeof(object), 0); SolidEdgePart.ExtrudedProtrusion extrudedProtrustion = null; SolidEdgePart.UserDefinedPattern userDefinedPattern = null; SolidEdgePart.MirrorCopy mirrorCopy = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new sheet metal document. sheetMetalDocument = documents.AddSheetMetalDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the RefPlanes collection. refPlanes = sheetMetalDocument.RefPlanes; // Get a reference to the top RefPlane using extension method. refPlane = refPlanes.GetTopPlane(); // Get path to Solid Edge training directory. Typically, 'C:\Program Files\Solid Edge XXX\Training'. var trainingDirectory = new System.IO.DirectoryInfo(SolidEdgeCommunity.SolidEdgeUtils.GetTrainingFolderPath()); // Build path to source part document. //string LibName = System.IO.Path.Combine(trainingDirectory.FullName, "Foot1.psm"); string LibName = System.IO.Path.Combine(trainingDirectory.FullName, "base.par"); // This method will take all features from block.par and place them into the new part document. sheetMetalDocument.PlaceFeatureLibrary(LibName, refPlane, 0.0, 0.0, 0.0, out features); // Optionally, iterate through all of the added features. foreach (var feature in features.OfType <object>()) { // Use helper class to get the feature type. var featureType = SolidEdgeCommunity.Runtime.InteropServices.ComObject.GetPropertyValue <SolidEdgePart.FeatureTypeConstants>(feature, "Type", (SolidEdgePart.FeatureTypeConstants) 0); // Depending on the feature type, we can cast the weakly typed feature to a strongly typed feature. switch (featureType) { case SolidEdgePart.FeatureTypeConstants.igExtrudedProtrusionFeatureObject: extrudedProtrustion = (SolidEdgePart.ExtrudedProtrusion)feature; break; case SolidEdgePart.FeatureTypeConstants.igUserDefinedPatternFeatureObject: userDefinedPattern = (SolidEdgePart.UserDefinedPattern)feature; break; case SolidEdgePart.FeatureTypeConstants.igMirrorCopyFeatureObject: mirrorCopy = (SolidEdgePart.MirrorCopy)feature; break; } } // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add all features to ActiveSelectSet. foreach (object feature in features) { selectSet.Add(feature); } // Switch to ISO view. application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgeAssembly.AssemblyDocument assemblyDocument = null; SolidEdgeAssembly.LineSegments lineSegments = null; SolidEdgeAssembly.LineSegment lineSegment = null; List <SolidEdgeAssembly.LineSegment> lineSegmentList = new List <SolidEdgeAssembly.LineSegment>(); SolidEdgeAssembly.StructuralFrames structuralFrames = null; SolidEdgeAssembly.StructuralFrame structuralFrame = null; SolidEdgeFramework.SelectSet selectSet = null; Array startPointArray = new double[] { 0.0, 0.0, 0.0 }; Array endPointArray = new double[] { 0.0, 0.0, 0.5 }; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new assembly document. assemblyDocument = documents.AddAssemblyDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the LineSegments collection. lineSegments = assemblyDocument.LineSegments; // Add a new line segment. lineSegment = lineSegments.Add( StartPoint: ref startPointArray, EndPoint: ref endPointArray); // Store line segment in array. lineSegmentList.Add(lineSegment); // Get a reference to the StructuralFrames collection. structuralFrames = assemblyDocument.StructuralFrames; // Build path to part file. In this case, it is a .par from standard install. string filename = System.IO.Path.Combine(SolidEdgeCommunity.SolidEdgeUtils.GetInstalledPath(), @"Frames\DIN\I-Beam\I-Beam 80x46.par"); // Add new structural frame. structuralFrame = structuralFrames.Add( PartFileName: filename, NumPaths: lineSegmentList.Count, Path: lineSegmentList.ToArray()); // Close the Frame environment. application.StartCommand(SolidEdgeConstants.AssemblyCommandConstants.AssemblyEnvironmentsExit); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Add the StructuralFrame to the select set. selectSet.Add(structuralFrame); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.AssemblyCommandConstants.AssemblyViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; List <SolidEdgePart.Profile> crossSectionProfiles = new List <SolidEdgePart.Profile>(); SolidEdgeFrameworkSupport.Lines2d lines2d = null; SolidEdgeFrameworkSupport.Circles2d circles2d = null; SolidEdgeFrameworkSupport.Relations2d relations2d = null; List <object> OriginArray = new List <object>(); SolidEdgePart.LoftedCutouts loftedCutouts = null; SolidEdgePart.LoftedCutout loftedCutout = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the RefPlanes collection. refPlanes = partDocument.RefPlanes; // Get a reference to top RefPlane. refPlane = refPlanes.GetTopPlane(); // Get a reference to the ProfileSets collection. profileSets = partDocument.ProfileSets; // Add new ProfileSet. profileSet = profileSets.Add(); // Get a reference to the Profiles collection. profiles = profileSet.Profiles; // Get a reference to the Models collection. models = partDocument.Models; #region Base Profile List <double[]> linesArray = new List <double[]>(); linesArray.Add(new double[] { 0, 0, 0.1, 0 }); linesArray.Add(new double[] { 0.1, 0, 0.1, 0.1 }); linesArray.Add(new double[] { 0.1, 0.1, 0, 0.1 }); linesArray.Add(new double[] { 0, 0.1, 0, 0 }); // Call helper method to create the actual geometry. model = PartHelper.CreateFiniteExtrudedProtrusion(partDocument, refPlane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.1); #endregion #region CrossSection Profile #1 refPlane = refPlanes.AddParallelByDistance( ParentPlane: refPlanes.GetRightPlane(), Distance: 0.1, NormalSide: SolidEdgePart.ReferenceElementConstants.igNormalSide, Local: true); // Add new ProfileSet. profileSet = profileSets.Add(); // Get a reference to the Profiles collection. profiles = profileSet.Profiles; crossSectionProfiles.Add(profiles.Add(refPlane)); OriginArray.Add(new double[] { 0.03, 0.03 }); lines2d = crossSectionProfiles[0].Lines2d; lines2d.AddBy2Points(0.03, 0.03, 0.07, 0.03); lines2d.AddBy2Points(0.07, 0.03, 0.07, 0.07); lines2d.AddBy2Points(0.07, 0.07, 0.03, 0.07); lines2d.AddBy2Points(0.03, 0.07, 0.03, 0.03); relations2d = (SolidEdgeFrameworkSupport.Relations2d)crossSectionProfiles[0].Relations2d; relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); crossSectionProfiles[0].End(SolidEdgePart.ProfileValidationType.igProfileClosed); crossSectionProfiles[0].Visible = false; #endregion #region CrossSection Profile #2 refPlane = refPlanes.AddParallelByDistance( ParentPlane: refPlanes.GetRightPlane(), Distance: 0.05, NormalSide: SolidEdgePart.ReferenceElementConstants.igNormalSide, Local: true); // Add new ProfileSet. profileSet = profileSets.Add(); // Get a reference to the Profiles collection. profiles = profileSet.Profiles; crossSectionProfiles.Add(profiles.Add(refPlane)); OriginArray.Add(new double[] { 0.0, 0.0 }); circles2d = crossSectionProfiles[1].Circles2d; circles2d.AddByCenterRadius(0.05, 0.05, 0.015); crossSectionProfiles[1].End(SolidEdgePart.ProfileValidationType.igProfileClosed); crossSectionProfiles[1].Visible = false; #endregion #region CrossSection Profile #3 refPlane = refPlanes.AddParallelByDistance( ParentPlane: refPlanes.GetRightPlane(), Distance: 0, NormalSide: SolidEdgePart.ReferenceElementConstants.igNormalSide, Local: true); // Add new ProfileSet. profileSet = profileSets.Add(); // Get a reference to the Profiles collection. profiles = profileSet.Profiles; crossSectionProfiles.Add(profiles.Add(refPlane)); OriginArray.Add(new double[] { 0.03, 0.03 }); lines2d = crossSectionProfiles[2].Lines2d; lines2d.AddBy2Points(0.03, 0.03, 0.07, 0.03); lines2d.AddBy2Points(0.07, 0.03, 0.07, 0.07); lines2d.AddBy2Points(0.07, 0.07, 0.03, 0.07); lines2d.AddBy2Points(0.03, 0.07, 0.03, 0.03); relations2d = (SolidEdgeFrameworkSupport.Relations2d)crossSectionProfiles[2].Relations2d; relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); crossSectionProfiles[2].End(SolidEdgePart.ProfileValidationType.igProfileClosed); crossSectionProfiles[2].Visible = false; #endregion // Get a reference to the LoftedCutouts collection. loftedCutouts = model.LoftedCutouts; // Build cross section type array. List <object> crossSectionTypes = new List <object>(); crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); // Create the lofted cutout. loftedCutout = loftedCutouts.AddSimple(crossSectionProfiles.Count, crossSectionProfiles.ToArray(), crossSectionTypes.ToArray(), OriginArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igLeft, SolidEdgePart.FeaturePropertyConstants.igNone, SolidEdgePart.FeaturePropertyConstants.igNone); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new LoftedCutout to ActiveSelectSet. selectSet.Add(loftedCutout); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; SolidEdgePart.Sketchs sketches = null; SolidEdgePart.Sketch sketch = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile sketchProfile = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Circles2d circles2d = null; List <SolidEdgePart.Profile> listPaths = new List <SolidEdgePart.Profile>(); List <SolidEdgePart.FeaturePropertyConstants> listPathTypes = new List <SolidEdgePart.FeaturePropertyConstants>(); List <SolidEdgePart.Profile> listSections = new List <SolidEdgePart.Profile>(); List <SolidEdgePart.FeaturePropertyConstants> listSectionTypes = new List <SolidEdgePart.FeaturePropertyConstants>(); List <int> listOrigins = new List <int>(); try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the Documents collection. documents = application.Documents; // Create a new PartDocument. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the models collection. models = (SolidEdgePart.Models)partDocument.Models; // Get a reference to the Sketches collections. sketches = (SolidEdgePart.Sketchs)partDocument.Sketches; // Get a reference to the profile sets collection. profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets; // Get a reference to the ref planes collection. refPlanes = (SolidEdgePart.RefPlanes)partDocument.RefPlanes; // Get a reference to front RefPlane. refPlane = refPlanes.GetFrontPlane(); // Add a new sketch. sketch = (SolidEdgePart.Sketch)sketches.Add(); // Add profile for sketch on specified refplane. sketchProfile = sketch.Profiles.Add(refPlane); // Get a reference to the Circles2d collection. circles2d = sketchProfile.Circles2d; // Draw the Base Profile. circles2d.AddByCenterRadius(0, 0, 0.02); // Close the profile. sketchProfile.End(SolidEdgePart.ProfileValidationType.igProfileClosed); // Arrays for AddSweptProtrusion(). listPaths.Add(sketchProfile); listPathTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); // NOTE: profile is the Curve. refPlane = refPlanes.AddNormalToCurve( sketchProfile, SolidEdgePart.ReferenceElementConstants.igCurveEnd, refPlanes.GetFrontPlane(), SolidEdgePart.ReferenceElementConstants.igPivotEnd, true, System.Reflection.Missing.Value); // Add a new profile set. profileSet = (SolidEdgePart.ProfileSet)profileSets.Add(); // Get a reference to the profiles collection. profiles = (SolidEdgePart.Profiles)profileSet.Profiles; // add a new profile. profile = (SolidEdgePart.Profile)profiles.Add(refPlane); // Get a reference to the Circles2d collection. circles2d = profile.Circles2d; // Draw the Base Profile. circles2d.AddByCenterRadius(0, 0, 0.01); // Close the profile. profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed); // Arrays for AddSweptProtrusion(). listSections.Add(profile); listSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); listOrigins.Add(0); //Use 0 for closed profiles. // Create the extended protrusion. model = models.AddSweptProtrusion( listPaths.Count, listPaths.ToArray(), listPathTypes.ToArray(), listSections.Count, listSections.ToArray(), listSectionTypes.ToArray(), listOrigins.ToArray(), 0, SolidEdgePart.FeaturePropertyConstants.igLeft, SolidEdgePart.FeaturePropertyConstants.igNone, 0.0, null, SolidEdgePart.FeaturePropertyConstants.igNone, 0.0, null); // Hide profiles. sketchProfile.Visible = false; profile.Visible = false; // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Sketchs sketches = null; SolidEdgePart.Sketch sketch = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.BSplineCurves2d bsplineCurves2d = null; SolidEdgeFrameworkSupport.BSplineCurve2d bsplineCurve2d1 = null; SolidEdgeFrameworkSupport.BSplineCurve2d bsplineCurve2d2 = null; double startX = 0; double startY = 0; double endX = 0; double endY = 0; SolidEdgeFrameworkSupport.Arcs2d arcs2d = null; SolidEdgeFrameworkSupport.Arc2d arc2d = null; SolidEdgeFrameworkSupport.Relations2d relations2d = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the RefPlanes collection. refPlanes = partDocument.RefPlanes; // Get a reference to front RefPlane. refPlane = refPlanes.GetFrontPlane(); // Get a reference to the Sketches collection. sketches = partDocument.Sketches; // Create a new sketch. sketch = sketches.Add(); // Get a reference to the Profiles collection. profiles = sketch.Profiles; // Create a new profile. profile = profiles.Add(refPlane); // Get a reference to the BSplineCurves2d collection. bsplineCurves2d = profile.BSplineCurves2d; List <double> points = new List <double>(); points.Add(10.0 / 1000); points.Add(0.0 / 1000); points.Add(9.0 / 1000); points.Add(6.0 / 1000); points.Add(3.0 / 1000); points.Add(12.0 / 1000); // Create initial b-spline. bsplineCurve2d1 = bsplineCurves2d.AddByPoints( Order: 6, ArraySize: 3, Array: points.ToArray()); // Mirror initial b-spline. bsplineCurve2d2 = (SolidEdgeFrameworkSupport.BSplineCurve2d) bsplineCurve2d1.Mirror( x1: 0.0, y1: 1.0, x2: 0.0, y2: -1.0, BooleanCopyFlag: true); bsplineCurve2d1.GetNode( Index: bsplineCurve2d1.NodeCount, x: out startX, y: out startY); bsplineCurve2d2.GetNode( Index: bsplineCurve2d2.NodeCount, x: out endX, y: out endY); // Get a reference to the Arcs2d collection. arcs2d = profile.Arcs2d; // Draw arc to connect the two b-splines. arc2d = arcs2d.AddByCenterStartEnd( xCenter: 0.0, yCenter: 0.0, xStart: startX, yStart: startY, xEnd: endX, yEnd: endY); int endKeyPointIndex1 = GetBSplineCurves2dEndKeyPointIndex(bsplineCurve2d1); int endKeyPointIndex2 = GetBSplineCurves2dEndKeyPointIndex(bsplineCurve2d2); // Get a reference to the Relations2d collection. relations2d = (SolidEdgeFrameworkSupport.Relations2d) profile.Relations2d; // Connect BSplineCurve2d and arc. relations2d.AddKeypoint( Object1: bsplineCurve2d1, Index1: endKeyPointIndex1, Object2: arc2d, Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igArcStart); // Connect BSplineCurve2d and arc. relations2d.AddKeypoint( Object1: bsplineCurve2d2, Index1: endKeyPointIndex2, Object2: arc2d, Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igArcEnd); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Sketchs sketches = null; SolidEdgePart.Sketch sketch = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Circles2d circles2d = null; SolidEdgeFrameworkSupport.Circle2d circle2d = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the RefPlanes collection. refPlanes = partDocument.RefPlanes; // Get a reference to front RefPlane. refPlane = refPlanes.GetFrontPlane(); // Get a reference to the Sketches collection. sketches = partDocument.Sketches; // Create a new sketch. sketch = sketches.Add(); // Get a reference to the Profiles collection. profiles = sketch.Profiles; // Create a new profile. profile = profiles.Add(refPlane); circles2d = profile.Circles2d; circle2d = circles2d.AddByCenterRadius(0.04, 0.05, 0.02); profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new FaceRotate to ActiveSelectSet. selectSet.Add(circle2d); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
/// <summary> /// Activates a specified Solid Edge command. /// </summary> public static void StartCommand(this SolidEdgeFramework.Application application, SolidEdgeFramework.SolidEdgeCommandConstants CommandID) { application.StartCommand((SolidEdgeFramework.SolidEdgeCommandConstants)CommandID); }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.SheetMetalDocument sheetMetalDocument = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; SolidEdgePart.Sketchs sketchs = null; SolidEdgePart.Sketch sketch = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgePart.Etches etches = null; SolidEdgePart.Etch etch = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Add a new sheet metal document. sheetMetalDocument = documents.AddSheetMetalDocument(); // Invoke existing sample to create geometry. SheetMetalHelper.CreateHolesWithUserDefinedPattern(sheetMetalDocument); // Get a reference to the Sketches collection. sketchs = sheetMetalDocument.Sketches; // Get the 1st Sketch. sketch = sketchs.Item(1); // Get a reference to the Profiles collection. profiles = sketch.Profiles; // Get the 1st Profile. profile = profiles.Item(1); // Get a reference to the Models collection. models = sheetMetalDocument.Models; // Get the 1st Model. model = models.Item(1); // Get a reference to the Etches collection. etches = model.Etches; // Add the Etch. etch = etches.Add(profile); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new Dimple to ActiveSelectSet. selectSet.Add(etch); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Lines2d lines2d = null; SolidEdgeFrameworkSupport.Relations2d relations2d = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the RefPlanes collection. refPlanes = partDocument.RefPlanes; // Get a reference to the top RefPlane using extension method. refPlane = refPlanes.GetTopPlane(); // Get a reference to the ProfileSets collection. profileSets = partDocument.ProfileSets; // Add a new ProfileSet. profileSet = profileSets.Add(); // Get a reference to the Profiles collection. profiles = profileSet.Profiles; // Add a new Profile. profile = profiles.Add(refPlane); // Get a reference to the Relations2d collection. relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d; // Get a reference to the Lines2d collection. lines2d = profile.Lines2d; int sides = 8; double angle = 360 / sides; angle = (angle * Math.PI) / 180; double radius = .05; double lineLength = 2 * radius * (Math.Tan(angle) / 2); // x1, y1, x2, y2 double[] points = { 0.0, 0.0, 0.0, 0.0 }; double x = 0.0; double y = 0.0; points[2] = -((Math.Cos(angle / 2) * radius) - x); points[3] = -((lineLength / 2) - y); // Draw each line. for (int i = 0; i < sides; i++) { points[0] = points[2]; points[1] = points[3]; points[2] = points[0] + (Math.Sin(angle * i) * lineLength); points[3] = points[1] + (Math.Cos(angle * i) * lineLength); lines2d.AddBy2Points(points[0], points[1], points[2], points[3]); } // Create endpoint relationships. for (int i = 1; i <= lines2d.Count; i++) { if (i == lines2d.Count) { relations2d.AddKeypoint(lines2d.Item(i), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); } else { relations2d.AddKeypoint(lines2d.Item(i), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(i + 1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relations2d.AddEqual(lines2d.Item(i), lines2d.Item(i + 1)); } } // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add all lines to ActiveSelectSet. for (int i = 1; i <= lines2d.Count; i++) { selectSet.Add(lines2d.Item(i)); } // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Model model = null; SolidEdgePart.ExtrudedProtrusions extrudedProtrusions = null; SolidEdgeFramework.SelectSet selectSet = null; SolidEdgePart.ExtrudedProtrusion extrudedProtrusion = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the RefPlanes collection. refPlanes = partDocument.RefPlanes; // Get a reference to a RefPlane. refPlane = refPlanes.GetFrontPlane(); List <double[]> linesArray = new List <double[]>(); linesArray.Add(new double[] { 0, 0, 0.08, 0 }); linesArray.Add(new double[] { 0.08, 0, 0.08, 0.06 }); linesArray.Add(new double[] { 0.08, 0.06, 0.064, 0.06 }); linesArray.Add(new double[] { 0.064, 0.06, 0.064, 0.02 }); linesArray.Add(new double[] { 0.064, 0.02, 0.048, 0.02 }); linesArray.Add(new double[] { 0.048, 0.02, 0.048, 0.06 }); linesArray.Add(new double[] { 0.048, 0.06, 0.032, 0.06 }); linesArray.Add(new double[] { 0.032, 0.06, 0.032, 0.02 }); linesArray.Add(new double[] { 0.032, 0.02, 0.016, 0.02 }); linesArray.Add(new double[] { 0.016, 0.02, 0.016, 0.06 }); linesArray.Add(new double[] { 0.016, 0.06, 0, 0.06 }); linesArray.Add(new double[] { 0, 0.06, 0, 0 }); // Call helper method to create the actual geometry. model = PartHelper.CreateFiniteExtrudedProtrusion(partDocument, refPlane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.005); // Get a reference to the ExtrudedProtrusions collection. extrudedProtrusions = model.ExtrudedProtrusions; // Get a reference to the new ExtrudedProtrusion. extrudedProtrusion = extrudedProtrusions.Item(1); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new protrusion to ActiveSelectSet. selectSet.Add(extrudedProtrusion); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.SheetMetalDocument sheetMetalDocument = null; SolidEdgePart.Sketchs sketches = null; SolidEdgePart.Sketch sketch = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile1 = null; SolidEdgePart.Profile profile2 = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgeFrameworkSupport.Lines2d lines2d = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; List <object> crossSections = new List <object>(); List <object> crossSectionTypes = new List <object>(); List <object> origins = new List <object>(); List <object> originRefs = new List <object>(); double bendRadius = 0.001; double neutralFactor = 0.33; SolidEdgeFramework.SelectSet selectSet = null; SolidEdgePart.LoftedFlanges loftedFlanges = null; SolidEdgePart.LoftedFlange loftedFlange = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to Solid Edge, application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new sheetmetal document. sheetMetalDocument = documents.AddSheetMetalDocument(); // Get a reference to the Sketches collection. sketches = sheetMetalDocument.Sketches; // Get a reference to the RefPlanes collection. refPlanes = sheetMetalDocument.RefPlanes; // Get a reference to top RefPlane. refPlane = refPlanes.GetTopPlane(); // Create new sketch. sketch = sketches.Add(); // Get a reference to the Profiles collection. profiles = sketch.Profiles; // Create new profile. profile1 = profiles.Add(refPlanes.Item(1)); // Get a reference to the Lines2d collection. lines2d = profile1.Lines2d; // Multidimensional array double[,] points = new double[, ] { { 0.0, 0.0, 0.1, 0.2 }, { 0.1, 0.2, 0.3, 0.2 }, { 0.3, 0.2, 0.4, 0.0 } }; for (int i = 0; i <= points.GetUpperBound(0); i++) { lines2d.AddBy2Points(points[i, 0], points[i, 1], points[i, 2], points[i, 3]); } origins.Add(lines2d.Item(1)); // Create Reference Plane Parallel to "XY" Plane at 1Meter distance. refPlane = refPlanes.AddParallelByDistance( ParentPlane: refPlanes.Item(1), Distance: 1, NormalSide: SolidEdgePart.ReferenceElementConstants.igReverseNormalSide); // Create new sketch. sketch = sketches.Add(); // Get a reference to the Profiles collection. profiles = sketch.Profiles; // Create new profile. profile2 = profiles.Add(refPlane); // Get a reference to the Lines2d collection. lines2d = profile2.Lines2d; for (int i = 0; i <= points.GetUpperBound(0); i++) { lines2d.AddBy2Points(points[i, 0], points[i, 1], points[i, 2], points[i, 3]); } origins.Add(lines2d.Item(1)); crossSections.Add(profile1); crossSections.Add(profile2); crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); originRefs.Add(SolidEdgePart.FeaturePropertyConstants.igStart); originRefs.Add(SolidEdgePart.FeaturePropertyConstants.igStart); // Get a reference to the Models collection. models = sheetMetalDocument.Models; // Create a new lofted flange. model = models.AddLoftedFlange(crossSections.Count, crossSections.ToArray(), crossSectionTypes.ToArray(), origins.ToArray(), originRefs.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, bendRadius, neutralFactor, SolidEdgePart.FeaturePropertyConstants.igNFType); // Get a reference to the LoftedFlanges collection. loftedFlanges = model.LoftedFlanges; // Get a reference to the new LoftedFlange. loftedFlange = loftedFlanges.Item(1); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new protrusion to ActiveSelectSet. selectSet.Add(loftedFlange); profile1.Visible = false; profile2.Visible = false; // Switch to ISO view. application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Sketchs sketches = null; SolidEdgePart.Sketch sketch = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Circles2d circles2d = null; SolidEdgeFrameworkSupport.Circle2d circle2d = null; SolidEdgePart.Constructions constructions = null; SolidEdgePart.ExtrudedSurfaces extrudedSurfaces = null; SolidEdgePart.ExtrudedSurface extrudedSurface = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the Documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the RefPlanes collection. refPlanes = partDocument.RefPlanes; // Get a reference to front RefPlane. refPlane = refPlanes.GetFrontPlane(); // Get a reference to the Sketches collection. sketches = partDocument.Sketches; // Create a new sketch. sketch = sketches.Add(); // Get a reference to the Profiles collection. profiles = sketch.Profiles; // Create a new profile. profile = profiles.Add(refPlane); circles2d = profile.Circles2d; circle2d = circles2d.AddByCenterRadius(0.04, 0.05, 0.02); profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed); // Get a reference to the Constructions collection. constructions = partDocument.Constructions; // Get a reference to the ExtrudedSurfaces collection. extrudedSurfaces = constructions.ExtrudedSurfaces; // These parameter variables are declared because we have to pass them as pointers. SolidEdgePart.KeyPointExtentConstants KeyPointFlags1 = SolidEdgePart.KeyPointExtentConstants.igTangentNormal; SolidEdgePart.KeyPointExtentConstants KeyPointFlags2 = SolidEdgePart.KeyPointExtentConstants.igTangentNormal; List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>(); for (int i = 1; i <= profiles.Count; i++) { profileList.Add(profiles.Item(i)); } Array profileArray = profileList.ToArray(); // Add a new ExtrudedSurface. extrudedSurface = extrudedSurfaces.Add( NumberOfProfiles: profileArray.Length, ProfileArray: ref profileArray, ExtentType1: SolidEdgePart.FeaturePropertyConstants.igFinite, ExtentSide1: SolidEdgePart.FeaturePropertyConstants.igRight, FiniteDepth1: 0.0127, KeyPointOrTangentFace1: null, KeyPointFlags1: ref KeyPointFlags1, FromFaceOrRefPlane: null, FromFaceOffsetSide: SolidEdgePart.OffsetSideConstants.seOffsetNone, FromFaceOffsetDistance: 0, TreatmentType1: SolidEdgePart.TreatmentTypeConstants.seTreatmentCrown, TreatmentDraftSide1: SolidEdgePart.DraftSideConstants.seDraftInside, TreatmentDraftAngle1: 0.1, TreatmentCrownType1: SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownByOffset, TreatmentCrownSide1: SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideInside, TreatmentCrownCurvatureSide1: SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureInside, TreatmentCrownRadiusOrOffset1: 0.003, TreatmentCrownTakeOffAngle1: 0, ExtentType2: SolidEdgePart.FeaturePropertyConstants.igFinite, ExtentSide2: SolidEdgePart.FeaturePropertyConstants.igLeft, FiniteDepth2: 0.0127, KeyPointOrTangentFace2: null, KeyPointFlags2: ref KeyPointFlags2, ToFaceOrRefPlane: null, ToFaceOffsetSide: SolidEdgePart.OffsetSideConstants.seOffsetNone, ToFaceOffsetDistance: 0, TreatmentType2: SolidEdgePart.TreatmentTypeConstants.seTreatmentCrown, TreatmentDraftSide2: SolidEdgePart.DraftSideConstants.seDraftNone, TreatmentDraftAngle2: 0, TreatmentCrownType2: SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownByOffset, TreatmentCrownSide2: SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideInside, TreatmentCrownCurvatureSide2: SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureInside, TreatmentCrownRadiusOrOffset2: 0.003, TreatmentCrownTakeOffAngle2: 0, WantEndCaps: true ); SolidEdgePart.FeaturePropertyConstants ExtentType; SolidEdgePart.FeaturePropertyConstants ExtentSide; double FiniteDepth = 0.0; SolidEdgePart.KeyPointExtentConstants KeyPointFlags = SolidEdgePart.KeyPointExtentConstants.igTangentNormal; // Get extent information for the first direction. extrudedSurface.GetDirection1Extent(out ExtentType, out ExtentSide, out FiniteDepth); // Modify parameters. FiniteDepth = 2.0; ExtentType = SolidEdgePart.FeaturePropertyConstants.igFinite; ExtentSide = SolidEdgePart.FeaturePropertyConstants.igRight; // Apply extent information for the first direction. extrudedSurface.ApplyDirection1Extent( ExtentType, ExtentSide, FiniteDepth, null, ref KeyPointFlags); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new FaceRotate to ActiveSelectSet. selectSet.Add(extrudedSurface); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.SheetMetalDocument sheetMetalDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Model model = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Lines2d lines2d = null; SolidEdgeFrameworkSupport.Line2d line2d = null; SolidEdgePart.Dimple dimple = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the Documents collection. documents = application.Documents; // Create a new sheetmetal document. sheetMetalDocument = documents.AddSheetMetalDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Call helper method to create the actual geometry. model = SheetMetalHelper.CreateBaseTabByCircle(sheetMetalDocument); // Get a reference to the RefPlanes collection. refPlanes = sheetMetalDocument.RefPlanes; // Get a reference to front RefPlane. refPlane = refPlanes.GetFrontPlane(); // Get a reference to the ProfileSets collection. profileSets = sheetMetalDocument.ProfileSets; // Add new ProfileSet. profileSet = profileSets.Add(); // Get a reference to the Profiles collection. profiles = profileSet.Profiles; // Add new Profile. profile = profiles.Add(refPlane); // Draw a line to define the dimple point. lines2d = profile.Lines2d; line2d = lines2d.AddBy2Points(0, 0, 0.01, 0); // Hide the profile. profile.Visible = false; double depth = 0.01; // Add new dimple. dimple = model.Dimples.Add( Profile: profile, Depth: depth, ProfileSide: SolidEdgePart.DimpleFeatureConstants.seDimpleDepthLeft, DepthSide: SolidEdgePart.DimpleFeatureConstants.seDimpleDepthRight); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new Dimple to ActiveSelectSet. selectSet.Add(dimple); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; SolidEdgeFrameworkSupport.Lines2d lines2d = null; SolidEdgeFrameworkSupport.Line2d axis = null; SolidEdgeFrameworkSupport.Arcs2d arcs2d = null; SolidEdgeFrameworkSupport.Relations2d relations2d = null; SolidEdgePart.RefAxis refaxis = null; Array aProfiles = null; SolidEdgeGeometry.Edges edges = null; SolidEdgeGeometry.Circle circle = null; SolidEdgePart.RevolvedProtrusions revolvedProtrusions = null; SolidEdgePart.RevolvedProtrusion revolvedProtrusion = null; Array center = null; SolidEdgePart.Rounds rounds = null; try { Console.WriteLine("Registering OleMessageFilter."); // Register with OLE to handle concurrency issues on the current thread. OleMessageFilter.Register(); Console.WriteLine("Connecting to Solid Edge."); // Connect to or start Solid Edge. application = SolidEdgeUtils.Connect(true); // Make sure user can see the GUI. application.Visible = true; // Bring Solid Edge to the foreground. application.Activate(); // Get a reference to the Documents collection. documents = application.Documents; Console.WriteLine("Creating a new part document."); // Create a new PartDocument. partDocument = (SolidEdgePart.PartDocument) documents.Add("SolidEdge.PartDocument"); // Always a good idea to give SE a chance to breathe. application.DoIdle(); Console.WriteLine("Drawing part."); // Get a reference to the models collection. models = (SolidEdgePart.Models)partDocument.Models; // D1 to FA are parameters in a form, introduced by the user. double D1 = 0.020; double D2 = 0.026; double D3 = 0.003; double D4 = 0.014; double L1 = 0.040; double L2 = 0.030; double L3 = 0.005; double FA = 0.0005; // round // Get a reference to the ref planes collection. refPlanes = partDocument.RefPlanes; // Front (xz). refPlane = refPlanes.Item(3); // Get a reference to the profile sets collection. profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets; // Create a new profile set. profileSet = profileSets.Add(); // Get a reference to the profiles collection. profiles = profileSet.Profiles; // Create a new profile. profile = profiles.Add(refPlane); // Get a reference to the profile lines2d collection. lines2d = profile.Lines2d; // Get a reference to the profile arcs2d collection. arcs2d = profile.Arcs2d; double H = L1 - L2; double y = L1 - L3 - (D4 - D3) / (2 * Math.Tan((118 / 2) * (Math.PI / 180))); lines2d.AddBy2Points(D3 / 2, 0, D2 / 2, 0); // Line1 lines2d.AddBy2Points(D2 / 2, 0, D2 / 2, H); // Line2 lines2d.AddBy2Points(D2 / 2, H, D1 / 2, H); // Line3 lines2d.AddBy2Points(D1 / 2, H, D1 / 2, L1); // Line4 lines2d.AddBy2Points(D1 / 2, L1, D4 / 2, L1); // Line5 lines2d.AddBy2Points(D4 / 2, L1, D4 / 2, L1 - L3); // Line6 lines2d.AddBy2Points(D4 / 2, L1 - L3, D3 / 2, y); // Line7 lines2d.AddBy2Points(D3 / 2, y, D3 / 2, 0); // Line8 axis = lines2d.AddBy2Points(0, 0, 0, L1); profile.ToggleConstruction(axis); // relations relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d; relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(5), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); relations2d.AddKeypoint(lines2d.Item(5), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(6), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); relations2d.AddKeypoint(lines2d.Item(6), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(7), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); relations2d.AddKeypoint(lines2d.Item(7), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(8), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); relations2d.AddKeypoint(lines2d.Item(8), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true); refaxis = (SolidEdgePart.RefAxis)profile.SetAxisOfRevolution(axis); // Close the profile. int status = profile.End(SolidEdgePart.ProfileValidationType.igProfileRefAxisRequired); profile.Visible = false; // Create a new array of profile objects. aProfiles = Array.CreateInstance(typeof(SolidEdgePart.Profile), 1); aProfiles.SetValue(profile, 0); Console.WriteLine("Creating finite revolved protrusion."); // add Finite Revolved Protrusion. model = models.AddFiniteRevolvedProtrusion(1, ref aProfiles, refaxis, SolidEdgePart.FeaturePropertyConstants.igRight, 2 * Math.PI, null, null); Console.WriteLine("Creating adding rounds."); SolidEdgeGeometry.Edge[] arrEdges = { null }; double[] arrRadii = { FA }; revolvedProtrusions = model.RevolvedProtrusions; revolvedProtrusion = revolvedProtrusions.Item(1); edges = (SolidEdgeGeometry.Edges)revolvedProtrusion.Edges[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll]; foreach (SolidEdgeGeometry.Edge edge in edges) { circle = (SolidEdgeGeometry.Circle)edge.Geometry; if (circle.Radius == D2 / 2) { center = Array.CreateInstance(typeof(double), 3); circle.GetCenterPoint(ref center); if ((double)center.GetValue(0) == 0 && (double)center.GetValue(1) == 0 && (double)center.GetValue(2) == H) { arrEdges[0] = edge; break; } } } rounds = model.Rounds; object optArg = Type.Missing; rounds.Add(1, arrEdges, arrRadii, optArg, optArg, optArg, optArg); Console.WriteLine("Switching to ISO view."); // Switch to ISO view. application.StartCommand((SolidEdgeFramework.SolidEdgeCommandConstants)SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { #if DEBUG System.Diagnostics.Debugger.Break(); #endif Console.WriteLine(ex.Message); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgeDraft.DraftDocument draftDocument = null; SolidEdgeDraft.Sheet sheet = null; SolidEdgeFrameworkSupport.TextBoxes textBoxes = null; SolidEdgeFrameworkSupport.TextBox textBox = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new draft document. draftDocument = documents.AddDraftDocument(); // Get a reference to the active sheet. sheet = draftDocument.ActiveSheet; // Get a reference to the TextBoxes collection. textBoxes = (SolidEdgeFrameworkSupport.TextBoxes)sheet.TextBoxes; // Disable screen updating for performance. application.ScreenUpdating = false; double x = 0; double y = 0; for (int i = 0; i < 10; i++) { x += .05; y = 0; for (int j = 0; j < 50; j++) { y += .01; // Add a new text box. textBox = textBoxes.Add(x, y, 0); textBox.TextScale = 1; textBox.VerticalAlignment = SolidEdgeFrameworkSupport.TextVerticalAlignmentConstants.igTextHzAlignVCenter; textBox.Text = String.Format("[X: {0:0.###} Y: {1:0.###}]", x, y); } } // Turn screen updating back on. application.ScreenUpdating = true; // Fit the view. application.StartCommand(SolidEdgeConstants.DetailCommandConstants.DetailViewFit); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.SheetMetalDocument sheetMetalDocument = null; SolidEdgePart.RefPlanes refplanes = null; SolidEdgePart.RefPlane refplane = null; SolidEdgePart.Model model = null; SolidEdgePart.HoleDataCollection holeDataCollection = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgePart.Holes2d holes2d = null; SolidEdgePart.Hole2d hole2d = null; SolidEdgePart.Holes holes = null; SolidEdgePart.Hole hole = null; long profileStatus = 0; List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>(); SolidEdgePart.UserDefinedPatterns userDefinedPatterns = null; SolidEdgePart.UserDefinedPattern userDefinedPattern = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the Documents collection. documents = application.Documents; // Create a new sheetmetal document. sheetMetalDocument = documents.AddSheetMetalDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Call helper method to create the actual geometry. model = SheetMetalHelper.CreateBaseTabByCircle(sheetMetalDocument); // Get a reference to the RefPlanes collection. refplanes = sheetMetalDocument.RefPlanes; // Get a reference to front RefPlane. refplane = refplanes.GetFrontPlane(); // Get a reference to the ProfileSets collection. profileSets = sheetMetalDocument.ProfileSets; // Add new ProfileSet. profileSet = profileSets.Add(); // Get a reference to the Profiles collection. profiles = profileSet.Profiles; // Add new Profile. profile = profiles.Add(refplane); // Get a reference to the Holes2d collection. holes2d = profile.Holes2d; // This creates a cross pattern of holes. double[,] holeMatrix = new double[, ] { //{x, y} { 0.00, 0.00 }, { -0.01, 0.00 }, { -0.02, 0.00 }, { -0.03, 0.00 }, { -0.04, 0.00 }, { 0.01, 0.00 }, { 0.02, 0.00 }, { 0.03, 0.00 }, { 0.04, 0.00 }, { 0.00, -0.01 }, { 0.00, -0.02 }, { 0.00, -0.03 }, { 0.00, -0.04 }, { 0.00, 0.01 }, { 0.00, 0.02 }, { 0.00, 0.03 }, { 0.00, 0.04 } }; // Draw the Base Profile. for (int i = 0; i <= holeMatrix.GetUpperBound(0); i++) { // Add new Hole2d. hole2d = holes2d.Add( XCenter: holeMatrix[i, 0], YCenter: holeMatrix[i, 1]); } // Hide the profile. profile.Visible = false; // Close profile. profileStatus = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed); // Get a reference to the ProfileSet. profileSet = (SolidEdgePart.ProfileSet)profile.Parent; // Get a reference to the Profiles collection. profiles = profileSet.Profiles; // Add profiles to list for AddByProfiles(). for (int i = 1; i <= profiles.Count; i++) { profileList.Add(profiles.Item(i)); } // Get a reference to the HoleDataCollection collection. holeDataCollection = sheetMetalDocument.HoleDataCollection; // Add new HoleData. SolidEdgePart.HoleData holeData = holeDataCollection.Add( HoleType: SolidEdgePart.FeaturePropertyConstants.igRegularHole, HoleDiameter: 0.005, BottomAngle: 90); // Get a reference to the Holes collection. holes = model.Holes; // Add hole. hole = holes.AddFinite( Profile: profile, ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight, FiniteDepth: 0.005, Data: holeData); // Get a reference to the UserDefinedPatterns collection. userDefinedPatterns = model.UserDefinedPatterns; // Create the user defined pattern. userDefinedPattern = userDefinedPatterns.AddByProfiles( NumberOfProfiles: profileList.Count, ProfilesArray: profileList.ToArray(), SeedFeature: hole); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new UserDefinedPattern to ActiveSelectSet. selectSet.Add(userDefinedPattern); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.Model model = null; SolidEdgePart.RevolvedProtrusions revolvedProtrusions = null; SolidEdgePart.RevolvedProtrusion revolvedProtrusion = null; SolidEdgeGeometry.Edges edges = null; SolidEdgePart.Rounds rounds = null; SolidEdgePart.Round round = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the Documents collection. documents = application.Documents; // Create a new PartDocument. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Call helper method to create the actual geometry. model = PartHelper.CreateFiniteRevolvedProtrusion(partDocument); // Get a reference to the RevolvedProtrusions collection. revolvedProtrusions = model.RevolvedProtrusions; // Get a reference to the new RevolvedProtrusion. revolvedProtrusion = revolvedProtrusions.Item(1); // Get a all Edges. edges = (SolidEdgeGeometry.Edges)revolvedProtrusion.Edges[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll]; List <SolidEdgeGeometry.Edge> edgeList = new List <SolidEdgeGeometry.Edge>(); List <double> radiusList = new List <double>(); // Build arrays. foreach (SolidEdgeGeometry.Edge edge in edges) { edgeList.Add(edge); radiusList.Add(0.002); } // Get a reference to the Rounds collection. rounds = model.Rounds; // Add single round with multiple Edges. round = rounds.Add(edgeList.Count, edgeList.ToArray(), radiusList.ToArray()); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new Round to ActiveSelectSet. selectSet.Add(round); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }