//------------------------------------------------------------------------------
//Callback Name: initialize_cb
//------------------------------------------------------------------------------
public void initialize_cb()
{
try
{
group0 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group0");
SeleElePart = (NXOpen.BlockStyler.SelectObject)theDialog.TopBlock.FindBlock("SeleElePart");
StrName = (NXOpen.BlockStyler.StringBlock)theDialog.TopBlock.FindBlock("StrName");
group = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group");
double_x = (NXOpen.BlockStyler.DoubleBlock)theDialog.TopBlock.FindBlock("double_x");
double_y = (NXOpen.BlockStyler.DoubleBlock)theDialog.TopBlock.FindBlock("double_y");
double_z = (NXOpen.BlockStyler.DoubleBlock)theDialog.TopBlock.FindBlock("double_z");
Selection.MaskTriple maskComp = new Selection.MaskTriple()
{
Type = 63,
Subtype = 1,
SolidBodySubtype = 0
};
Selection.MaskTriple[] masks = { maskComp };
SeleElePart.SetSelectionFilter(Selection.SelectionAction.ClearAndEnableSpecific, masks);//过滤只选择组件
}
catch (Exception ex)
{
//---- Enter your exception handling code here -----
theUI.NXMessageBox.Show("Block Styler", NXMessageBox.DialogType.Error, ex.ToString());
}
}
//------------------------------------------------------------------------------
//---------------------Block UI Styler Callback Functions--------------------------
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
//Callback Name: initialize_cb
//------------------------------------------------------------------------------
public void initialize_cb()
{
try
{
group0 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group0");
selectionBody = (NXOpen.BlockStyler.SelectObject)theDialog.TopBlock.FindBlock("selectionBody");
group2 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group2");
get_point = (NXOpen.BlockStyler.SelectObject)theDialog.TopBlock.FindBlock("get_point");
group = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group");
rotation_x = (NXOpen.BlockStyler.Button)theDialog.TopBlock.FindBlock("rotation_x");
rotation_y = (NXOpen.BlockStyler.Button)theDialog.TopBlock.FindBlock("rotation_y");
rotation_z = (NXOpen.BlockStyler.Button)theDialog.TopBlock.FindBlock("rotation_z");
//get_point.SelectModeAsString = "Multiple";
Selection.MaskTriple maskFace = new Selection.MaskTriple()
{
Type = 70,
Subtype = 2,
SolidBodySubtype = 20
};
Selection.MaskTriple maskPoint = new Selection.MaskTriple()
{
Type = 2,
Subtype = 0,
SolidBodySubtype = 0
};
Selection.MaskTriple[] masks = { maskFace, maskPoint };
get_point.SetSelectionFilter(Selection.SelectionAction.ClearAndEnableSpecific, masks);//过滤只选择点和面
}
catch (Exception ex)
{
//---- Enter your exception handling code here -----
theUI.NXMessageBox.Show("Block Styler", NXMessageBox.DialogType.Error, ex.ToString());
}
}
//------------------------------------------------------------------------------
//---------------------Block UI Styler Callback Functions--------------------------
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
//Callback Name: initialize_cb
//------------------------------------------------------------------------------
public void initialize_cb()
{
try
{
group0 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group0");
seleComp = (NXOpen.BlockStyler.SelectObject)theDialog.TopBlock.FindBlock("seleComp");
groupWorkpiece = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("groupWorkpiece");
strMoldNumber = (NXOpen.BlockStyler.StringBlock)theDialog.TopBlock.FindBlock("strMoldNumber");
strWorkpieceNumber = (NXOpen.BlockStyler.StringBlock)theDialog.TopBlock.FindBlock("strWorkpieceNumber");
strEditionNumber = (NXOpen.BlockStyler.StringBlock)theDialog.TopBlock.FindBlock("strEditionNumber");
groupEle = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("groupEle");
strEleName = (NXOpen.BlockStyler.StringBlock)theDialog.TopBlock.FindBlock("strEleName");
strEleName1 = (NXOpen.BlockStyler.StringBlock)theDialog.TopBlock.FindBlock("strEleName1");
strEleEditionNumber = (NXOpen.BlockStyler.StringBlock)theDialog.TopBlock.FindBlock("strEleEditionNumber");
groupWork = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("groupWork");
intWorkNumber = (NXOpen.BlockStyler.IntegerBlock)theDialog.TopBlock.FindBlock("intWorkNumber");
Selection.MaskTriple maskComp = new Selection.MaskTriple()
{
Type = 63,
Subtype = 1,
SolidBodySubtype = 0
};
Selection.MaskTriple[] masks = { maskComp };
seleComp.SetSelectionFilter(Selection.SelectionAction.ClearAndEnableSpecific, masks);//过滤只选择组件
}
catch (Exception ex)
{
//---- Enter your exception handling code here -----
theUI.NXMessageBox.Show("Block Styler", NXMessageBox.DialogType.Error, ex.ToString());
}
}
//------------------------------------------------------------------------------
//---------------------Block UI Styler Callback Functions--------------------------
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
//Callback Name: initialize_cb
//------------------------------------------------------------------------------
public void initialize_cb()
{
try
{
group0 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group0");
SeleElePart = (NXOpen.BlockStyler.SelectObject)theDialog.TopBlock.FindBlock("SeleElePart");
group = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group");
double_x = (NXOpen.BlockStyler.DoubleBlock)theDialog.TopBlock.FindBlock("double_x");
butt_x = (NXOpen.BlockStyler.Button)theDialog.TopBlock.FindBlock("butt_x");
double_y = (NXOpen.BlockStyler.DoubleBlock)theDialog.TopBlock.FindBlock("double_y");
butt_y = (NXOpen.BlockStyler.Button)theDialog.TopBlock.FindBlock("butt_y");
Selection.MaskTriple maskBody = new Selection.MaskTriple() //面
{
Type = 70,
Subtype = 0,
SolidBodySubtype = UFConstants.UF_UI_SEL_FEATURE_BODY
};
Selection.MaskTriple[] masks = { maskBody };
this.SeleElePart.SetSelectionFilter(Selection.SelectionAction.ClearAndEnableSpecific, masks);
this.bodys.Clear();
this.feature = null;
}
catch (Exception ex)
{
//---- Enter your exception handling code here -----
theUI.NXMessageBox.Show("Block Styler", NXMessageBox.DialogType.Error, ex.ToString());
}
}
//------------------------------------------------------------------------------
//---------------------Block UI Styler Callback Functions--------------------------
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
//Callback Name: initialize_cb
//------------------------------------------------------------------------------
public void initialize_cb()
{
try
{
group = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group");
seleComp = (NXOpen.BlockStyler.SelectObject)theDialog.TopBlock.FindBlock("seleComp");
group0 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group0");
MoldNumber = (NXOpen.BlockStyler.StringBlock)theDialog.TopBlock.FindBlock("MoldNumber");
PartNumber = (NXOpen.BlockStyler.StringBlock)theDialog.TopBlock.FindBlock("PartNumber");
EditionNumber = (NXOpen.BlockStyler.StringBlock)theDialog.TopBlock.FindBlock("EditionNumber");
ClientNumber = (NXOpen.BlockStyler.StringBlock)theDialog.TopBlock.FindBlock("ClientNumber");
enum0 = (NXOpen.BlockStyler.Enumeration)theDialog.TopBlock.FindBlock("enum0");
Selection.MaskTriple maskComp = new Selection.MaskTriple()
{
Type = 63,
Subtype = 1,
SolidBodySubtype = 0
};
Selection.MaskTriple[] masks = { maskComp };
seleComp.SetSelectionFilter(Selection.SelectionAction.ClearAndEnableSpecific, masks);//过滤只选择组件
}
catch (Exception ex)
{
//---- Enter your exception handling code here -----
theUI.NXMessageBox.Show("Block Styler", NXMessageBox.DialogType.Error, ex.ToString());
}
}
//------------------------------------------------------------------------------
//---------------------Block UI Styler Callback Functions--------------------------
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
//Callback Name: initialize_cb
//------------------------------------------------------------------------------
public void initialize_cb()
{
try
{
group0 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group0");
group = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group");
selectiObj = (NXOpen.BlockStyler.SelectObject)theDialog.TopBlock.FindBlock("selectiObj");
group1 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group1");
vector = (NXOpen.BlockStyler.SpecifyVector)theDialog.TopBlock.FindBlock("vector");
color = (NXOpen.BlockStyler.Toggle)theDialog.TopBlock.FindBlock("color");
Selection.MaskTriple maskFace = new Selection.MaskTriple() //面
{
Type = 70,
Subtype = 2,
SolidBodySubtype = UFConstants.UF_UI_SEL_FEATURE_ANY_FACE
};
Selection.MaskTriple maskBody = new Selection.MaskTriple() //面
{
Type = 70,
Subtype = 0,
SolidBodySubtype = UFConstants.UF_UI_SEL_FEATURE_BODY
};
Selection.MaskTriple[] masks = { maskFace, maskBody };
this.selectiObj.SetSelectionFilter(Selection.SelectionAction.ClearAndEnableSpecific, masks);//过滤只选择点和面
}
catch (Exception ex)
{
//---- Enter your exception handling code here -----
theUI.NXMessageBox.Show("Block Styler", NXMessageBox.DialogType.Error, ex.ToString());
}
}
//------------------------------------------------------------------------------
//---------------------Block UI Styler Callback Functions--------------------------
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
//Callback Name: initialize_cb
//------------------------------------------------------------------------------
public void initialize_cb()
{
try
{
groupPart = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("groupPart");
selePart = (NXOpen.BlockStyler.SelectObject)theDialog.TopBlock.FindBlock("selePart");
group = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group");
addOrModify = (NXOpen.BlockStyler.Toggle)theDialog.TopBlock.FindBlock("addOrModify");
workNumber = (NXOpen.BlockStyler.Enumeration)theDialog.TopBlock.FindBlock("workNumber");
group2 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group2");
selePoint = (NXOpen.BlockStyler.SelectObject)theDialog.TopBlock.FindBlock("selePoint");
group1 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group1");
button_X = (NXOpen.BlockStyler.Button)theDialog.TopBlock.FindBlock("button_X");
button_Z = (NXOpen.BlockStyler.Button)theDialog.TopBlock.FindBlock("button_Z");
button_Y = (NXOpen.BlockStyler.Button)theDialog.TopBlock.FindBlock("button_Y");
addOrModify = (NXOpen.BlockStyler.Toggle)theDialog.TopBlock.FindBlock("addOrModify");
workNumber = (NXOpen.BlockStyler.Enumeration)theDialog.TopBlock.FindBlock("workNumber");
#region 过滤
Selection.MaskTriple maskComp = new Selection.MaskTriple()
{
Type = 63,
Subtype = 1,
SolidBodySubtype = 0
};
Selection.MaskTriple[] masks = { maskComp };
selePart.SetSelectionFilter(Selection.SelectionAction.ClearAndEnableSpecific, masks);//过滤只选择组件
Selection.MaskTriple maskFace = new Selection.MaskTriple()
{
Type = 70,
Subtype = 2,
SolidBodySubtype = 20
};
Selection.MaskTriple maskPoint = new Selection.MaskTriple()
{
Type = 2,
Subtype = 0,
SolidBodySubtype = 0
};
Selection.MaskTriple[] masks1 = { maskFace, maskPoint };
selePoint.SetSelectionFilter(Selection.SelectionAction.ClearAndEnableSpecific, masks1);//过滤只选择点和面
#endregion
}
catch (Exception ex)
{
//---- Enter your exception handling code here -----
theUI.NXMessageBox.Show("Block Styler", NXMessageBox.DialogType.Error, ex.ToString());
}
}
//------------------------------------------------------------------------------
//---------------------Block UI Styler Callback Functions--------------------------
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
//Callback Name: initialize_cb
//------------------------------------------------------------------------------
public void initialize_cb()
{
try
{
Group = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("Group");
Selection = (NXOpen.BlockStyler.SelectObject)theDialog.TopBlock.FindBlock("Selection");
Group1 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("Group1");
Selection1 = (NXOpen.BlockStyler.SelectObject)theDialog.TopBlock.FindBlock("Selection1");
Selection.MaskTriple maskBody = new Selection.MaskTriple() //面
{
Type = 70,
Subtype = 0,
SolidBodySubtype = UFConstants.UF_UI_SEL_FEATURE_BODY
};
Selection.MaskTriple[] masks = { maskBody };
this.Selection.SetSelectionFilter(NXOpen.Selection.SelectionAction.ClearAndEnableSpecific, masks);
this.Selection1.SetSelectionFilter(NXOpen.Selection.SelectionAction.ClearAndEnableSpecific, masks);
}
catch (Exception ex)
{
//---- Enter your exception handling code here -----
theUI.NXMessageBox.Show("Block Styler", NXMessageBox.DialogType.Error, ex.ToString());
}
}
//------------------------------------------------------------------------------
//---------------------Block UI Styler Callback Functions--------------------------
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
//Callback Name: initialize_cb
//------------------------------------------------------------------------------
public void initialize_cb()
{
try
{
group0 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group0");
type = (NXOpen.BlockStyler.Enumeration)theDialog.TopBlock.FindBlock("type");
group = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group");
selectObject = (NXOpen.BlockStyler.SelectObject)theDialog.TopBlock.FindBlock("selectObject");
manip = (NXOpen.BlockStyler.SpecifyOrientation)theDialog.TopBlock.FindBlock("manip");
vector = (NXOpen.BlockStyler.SpecifyVector)theDialog.TopBlock.FindBlock("vector");
group1 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group1");
boolOffset = (NXOpen.BlockStyler.Toggle)theDialog.TopBlock.FindBlock("boolOffset");
dimOffset = (NXOpen.BlockStyler.LinearDimension)theDialog.TopBlock.FindBlock("dimOffset");
group5 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group5");
positiveX = (NXOpen.BlockStyler.LinearDimension)theDialog.TopBlock.FindBlock("positiveX");
negativeX = (NXOpen.BlockStyler.LinearDimension)theDialog.TopBlock.FindBlock("negativeX");
positiveY = (NXOpen.BlockStyler.LinearDimension)theDialog.TopBlock.FindBlock("positiveY");
negativeY = (NXOpen.BlockStyler.LinearDimension)theDialog.TopBlock.FindBlock("negativeY");
negativeZ = (NXOpen.BlockStyler.LinearDimension)theDialog.TopBlock.FindBlock("negativeZ");
positiveZ = (NXOpen.BlockStyler.LinearDimension)theDialog.TopBlock.FindBlock("positiveZ");
radial = (NXOpen.BlockStyler.LinearDimension)theDialog.TopBlock.FindBlock("radial");
group2 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group2");
boolHide = (NXOpen.BlockStyler.Toggle)theDialog.TopBlock.FindBlock("boolHide");
boolUnite = (NXOpen.BlockStyler.Toggle)theDialog.TopBlock.FindBlock("boolUnite");
boolPlane = (NXOpen.BlockStyler.Toggle)theDialog.TopBlock.FindBlock("boolPlane");
boolSurface = (NXOpen.BlockStyler.Toggle)theDialog.TopBlock.FindBlock("boolSurface");
group3 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group3");
intTranslucency = (NXOpen.BlockStyler.IntegerBlock)theDialog.TopBlock.FindBlock("intTranslucency");
intLayer = (NXOpen.BlockStyler.IntegerBlock)theDialog.TopBlock.FindBlock("intLayer");
intColor = (NXOpen.BlockStyler.ObjectColorPicker)theDialog.TopBlock.FindBlock("intColor");
group4 = (NXOpen.BlockStyler.Group)theDialog.TopBlock.FindBlock("group4");
bttPreview = (NXOpen.BlockStyler.Button)theDialog.TopBlock.FindBlock("bttPreview");
strPreview = (NXOpen.BlockStyler.Label)theDialog.TopBlock.FindBlock("strPreview");
#region 择过滤
Selection.MaskTriple maskFace = new Selection.MaskTriple() //面
{
Type = 70,
Subtype = 2,
SolidBodySubtype = UFConstants.UF_UI_SEL_FEATURE_ANY_FACE
};
Selection.MaskTriple maskPoint = new Selection.MaskTriple() //点
{
Type = 2,
Subtype = 0,
SolidBodySubtype = 0
};
Selection.MaskTriple maskCurve = new Selection.MaskTriple() //线
{
Type = 3,
Subtype = 0,
SolidBodySubtype = 0
};
Selection.MaskTriple maskEdge = new Selection.MaskTriple() //边
{
Type = 70,
Subtype = 3,
SolidBodySubtype = UFConstants.UF_UI_SEL_FEATURE_ANY_EDGE
};
Selection.MaskTriple[] masks = { maskFace, maskPoint, maskCurve, maskEdge };
selectObject.SetSelectionFilter(Selection.SelectionAction.ClearAndEnableSpecific, masks);//过滤只选择点和面
#endregion
SetLinearDimensionShow(false);
radial.Show = false;
}
catch (Exception ex)
{
//---- Enter your exception handling code here -----
theUI.NXMessageBox.Show("Block Styler", NXMessageBox.DialogType.Error, ex.ToString());
}
}
