static async Task Main(string[] args)
{
// First argument: client number (otherwise 0)
int clientNumber = 0;
if (args.Length > 0 && int.TryParse(args[0], out int it))
{
clientNumber = it;
}
clientID += "-" + clientNumber;
// Welcome message
Log.Write("Welcome to the test client: " + clientID);
// RPC initialization
var demoRpcConfig = new RpcClientConfig {
ClientID = clientID,
ServerUrl = "http://localhost:5000/rpc"
};
RpcMain.InitRpcClient(demoRpcConfig, AuthenticateClient, () => new List <RpcFunctions> {
new BankClientRpc()
}, defaultTimeoutMs: 1000, new DemoRpcCommandBacklog());
// Run until killed
while (true)
{
await Task.Delay(1000);
}
}
static async Task Main(string[] args)
{
// Welcome message
Log.Write("Welcome to the simple demo client!");
// RPC initialization, using two server function classes
var serverDemo = new DemoServerRpcStub();
var serverCalc = new CalcRpcStub();
var demoRpcConfig = new RpcClientConfig {
ClientID = clientID,
ServerUrl = "http://localhost:5000/rpc"
};
RpcMain.InitRpcClient(demoRpcConfig, AuthenticateClient, () => new List <RpcFunctions> {
new DemoClientRpc(),
new CalcRpc()
});
// Each few seconds, send commands to the server. Log the result.
var random = new Random();
while (true)
{
try {
// Send greeting
Log.Write("Sending greeting...");
var greeting = new Greeting {
Name = "Andi",
MoreData = new SampleData {
Text = $"Hi server, now it is {DateTime.Now}"
}
};
await serverDemo.SayHelloToServer(greeting);
// Send calculation task. May fail on the remote side, when there is division by zero.
Log.Write("Successfully greeted. Now sending a little calculation task:");
int a = random.Next(1, 100);
int b = random.Next(0, 10);
long startTime = CoreUtils.TimeNow();
try {
int result = await serverCalc.DivideNumbers(a, b);
long runTime = CoreUtils.TimeNow() - startTime;
Log.Write($"{a}/{b}={result} (runtime: {runTime}ms)");
}
catch (RpcException ex) {
long runTime = CoreUtils.TimeNow() - startTime;
Log.Write($"{a}+{b}=Fail! (runtime: {runTime}ms; {ex.Type}: {ex.Message})");
}
}
catch (RpcException ex) {
Log.Write("Error: " + ex.Failure.Type + ": " + ex.Message);
}
// Wait a second before the next round
await Task.Delay(1000);
}
}
static async Task Main(string[] args)
{
// First argument: client number
int clientNumber = 0;
if (args.Length > 0 && int.TryParse(args[0], out int it))
{
clientNumber = it;
}
else
{
throw new Exception("Must be started with client number as parameter");
}
clientID += "-" + clientNumber;
// Welcome message
Log.Write("Welcome to the test client: " + clientID);
// RPC initialization
var serverCalc = new CalcRpcStub();
var demoRpcConfig = new RpcClientConfig {
ClientID = clientID,
ServerUrl = "http://localhost:5000/rpc"
};
RpcMain.InitRpcClient(demoRpcConfig, AuthenticateClient, () => new List <RpcFunctions> {
new CalcRpc()
});
// Each 0-100 ms, send a simple calculation task to the server: a + b = ?
// a is an ascending number, starting from clientNumber * 1000
// b is a random number between 1 and 100.
// Write the calculations in the file "{clientID}.calclog" (used in the RpcLibTest project)
string filename = $"{clientID}.calclog";
File.Delete(filename);
int a = clientNumber * 1000;
var random = new Random();
while (true)
{
long startTime = CoreUtils.TimeNow();;
a++;
int b = random.Next(1, 100);
try {
int result = await serverCalc.AddNumbers(a, b);
long runTime = CoreUtils.TimeNow() - startTime;
Log.WriteToFile(filename, $"{a}+{b}={result} | {runTime}ms");
}
catch (RpcException ex) {
long runTime = CoreUtils.TimeNow() - startTime;
Log.WriteToFile(filename, $"{a}+{b}=? | {runTime}ms | Fail: {ex.Type}: {ex.Message}");
}
await Task.Delay(random.Next(0, 100));
}
}
/// <summary>
/// Call this method at the beginning to enable the communication to the server, so that this client
/// can both receive commands from the server and send commands to the server.
/// </summary>
/// <param name="clientMethods">A function which returns new instances of the client's RPC method implementations</param>
/// <param name="clientConfig">The settings of this client</param>
/// <param name="authAction">An action which authenticates the used HTTP client, e.g. by adding HTTP Basic Auth
/// information according to the client.</param>
/// <param name="commandBacklog">The backlog for storing failed commands to retry them later. May be null,
/// when only <see cref="RpcRetryStrategy.None"/> will be used.</param>
public void Start(Func <IEnumerable <RpcFunctions> > clientMethods, RpcClientConfig clientConfig,
Action <HttpClient> authAction, IRpcCommandBacklog?commandBacklog)
{
if (isRunning)
{
return;
}
isRunning = true;
// Remember client factory and settings
this.clientMethods = clientMethods;
this.clientConfig = clientConfig;
serverCache = new RpcPeerCache(clientID: "", commandBacklog);
// Create and authorize HTTP clients
httpPull = new HttpClient();
httpPull.Timeout = TimeSpan.FromSeconds(RpcServerEngine.longPollingSeconds + 10); // Give some more seconds for timeout
authAction(httpPull);
httpPush = new HttpClient();
httpPush.Timeout = TimeSpan.FromMilliseconds(RpcCommand.defaultTimeoutMs);
authAction(httpPush);
// Loop to pull the next command for this client from the server, execute it (if not already executed before)
// and send the response together with the next pull.
_ = Task.Run(async() => {
RpcCommandResult?lastResult = null;
while (isRunning)
{
RpcCommand?next = null;
try {
next = await PullFromServer(lastResult);
}
catch {
// Could not reach server. Try the same result report again.
await Task.Delay(1000); // Wait a second before trying again
}
if (next != null)
{
lastResult = await ExecuteLocallyNow(next);
}
}
});
// Loop to execute (i.e. send to server) the next command in the queue.
_ = Task.Run(async() => {
while (isRunning)
{
RpcCommand?next = await serverCache.DequeueCommand(timeoutMs: -1); // No timeout
if (next != null)
{
next.SetState(RpcCommandState.Sent);
await ExecuteOnServerNow(next);
// In case of a networking problem, wait a second before trying the next command
if (next.GetResult().Failure?.IsNetworkProblem ?? false)
{
await Task.Delay(1000);
}
}
}
});
}
/// <summary>
/// Initialize the RPC client with the given configuration, authentication method
/// server-side RPC functions, optionally default timeout in ms and optionally backlog for retrying failed commands.
/// </summary>
public static void InitRpcClient(RpcClientConfig config, Action <HttpClient> auth,
Func <List <RpcFunctions> > rpcFunctions, int?defaultTimeoutMs = null, IRpcCommandBacklog?commandBacklog = null)
{
// Set default timeout
if (defaultTimeoutMs != null)
{
RpcCommand.defaultTimeoutMs = defaultTimeoutMs.Value;
}
// Start client
RpcClientEngine.Instance.Start(rpcFunctions, config, auth, commandBacklog);
}
static async Task Main(string[] args)
{
// First argument: client number (otherwise 0)
int clientNumber = 0;
if (args.Length > 0 && int.TryParse(args[0], out int it))
{
clientNumber = it;
}
clientID += "-" + clientNumber;
// Welcome message
Log.Write("Welcome to the test client: " + clientID);
// RPC initialization
var bankServer = new BankServerRpcStub();
var demoRpcConfig = new RpcClientConfig {
ClientID = clientID,
ServerUrl = "http://localhost:5000/rpc"
};
RpcMain.InitRpcClient(demoRpcConfig, AuthenticateClient, () => new List <RpcFunctions> {
}, defaultTimeoutMs: 1000, new DemoRpcCommandBacklog());
// See the RetryOnClientTest test project to understand what we are doing now.
// Repeatedly, get the current account balance and send an increasing amount (1 ct, 2ct, 3ct, ...)
// to the bank, which is still offline at the beginning. This is done for 20 seconds.
// Each 5 seconds, change the owner name.
string filename = $"{clientID}.banklog";
// TODO bankServer.OnAddMoneyRetryFinished = (command) =>
// Log.WriteToFile(filename, $"{command.GetParam<int>(1)} | {command.GetResult().ResultJson} | retried");
for (int i = 1; i <= 20; i++)
{
// Get current balance (no retry!)
long startTime = CoreUtils.TimeNow();
try {
int newCents = await bankServer.GetBalance(clientNumber);
long runTime = CoreUtils.TimeNow() - startTime;
Log.WriteToFile(filename, $"Now | {newCents} | {runTime}ms");
}
catch (RpcException ex) {
long runTime = CoreUtils.TimeNow() - startTime;
Log.WriteToFile(filename, $"Now | Fail: {ex.Type}: {ex.Message} | {runTime}ms");
}
// Add money (retry for each command)
startTime = CoreUtils.TimeNow();;
try {
int newCents = await bankServer.AddMoney(clientNumber, i);
long runTime = CoreUtils.TimeNow() - startTime;
Log.WriteToFile(filename, $"Add | {i} | {newCents} | {runTime}ms");
}
catch (RpcException ex) {
long runTime = CoreUtils.TimeNow() - startTime;
Log.WriteToFile(filename, $"Add | {i} | Fail: {ex.Type}: {ex.Message} | {runTime}ms");
}
// Change owner name (retry for newest call of command)
if (i % 5 == 0)
{
startTime = CoreUtils.TimeNow();
string newName = "MyName-" + (i / 5);
try {
await bankServer.ChangeOwnerName(clientNumber, newName);
long runTime = CoreUtils.TimeNow() - startTime;
Log.WriteToFile(filename, $"Name | {newName} | {runTime}ms");
}
catch (RpcException ex) {
long runTime = CoreUtils.TimeNow() - startTime;
Log.WriteToFile(filename, $"Name | {newName} | Fail: {ex.Type}: {ex.Message} | {runTime}ms");
}
}
await Task.Delay(1000);
}
// Finished. Close client.
}
