コード例 #1
0
        public async Task TestCancel()
        {
            const int SecondsToRun = 20;
            using (TestHostContext hc = new TestHostContext(this))
            using (var tokenSource = new CancellationTokenSource())
            {
                Tracing trace = hc.GetTrace();
                var processInvoker = new ProcessInvoker();
                processInvoker.Initialize(hc);
                Stopwatch watch = Stopwatch.StartNew();
#if OS_WINDOWS
                Task execTask = processInvoker.ExecuteAsync("", "cmd.exe", $"/c \"choice /T {SecondsToRun} /D y\"", null, tokenSource.Token);
#endif
#if (OS_OSX || OS_LINUX)
                Task execTask = processInvoker.ExecuteAsync("", "bash", $"-c \"sleep {SecondsToRun}s\"", null, tokenSource.Token);
#endif
                await Task.Delay(500);
                tokenSource.Cancel();
                await Task.WhenAny(execTask);
                Assert.True(execTask.IsCompleted);
                Assert.True(!execTask.IsFaulted);
                Assert.True(execTask.IsCanceled);
                watch.Stop();
                var elapsedSeconds = watch.ElapsedMilliseconds / 1000;
                //if cancellation fails, then execution time is more than 10 seconds
                Assert.True(elapsedSeconds < SecondsToRun / 2, $"cancellation failed, because task took too long to run. {elapsedSeconds}");
            }
        }
コード例 #2
0
ファイル: ProcessInvokerL0.cs プロジェクト: ups216/vsts-agent
        public async Task TestCancel()
        {
            const int SecondsToRun = 20;

            using (TestHostContext hc = new TestHostContext(this))
                using (var tokenSource = new CancellationTokenSource())
                {
                    Tracing trace          = hc.GetTrace();
                    var     processInvoker = new ProcessInvoker();
                    processInvoker.Initialize(hc);
                    Stopwatch watch = Stopwatch.StartNew();
#if OS_WINDOWS
                    Task execTask = processInvoker.ExecuteAsync("", "cmd.exe", $"/c \"choice /T {SecondsToRun} /D y\"", null, tokenSource.Token);
#endif
#if (OS_OSX || OS_LINUX)
                    Task execTask = processInvoker.ExecuteAsync("", "bash", $"-c \"sleep {SecondsToRun}s\"", null, tokenSource.Token);
#endif
                    tokenSource.Cancel();
                    await Task.WhenAny(new Task[] { execTask });

                    Assert.True(execTask.IsCompleted);
                    Assert.True(!execTask.IsFaulted);
                    Assert.True(execTask.IsCanceled);
                    watch.Stop();
                    var elapsedSeconds = watch.ElapsedMilliseconds / 1000;
                    //if cancellation fails, then execution time is more than 10 seconds
                    Assert.True(elapsedSeconds < SecondsToRun / 2, "cancellation failed, because task took too long to run");
                }
        }
コード例 #3
0
        public async Task SuccessExitsWithCodeZero()
        {
            using (TestHostContext hc = new TestHostContext(this))
            {
                Tracing trace = hc.GetTrace();

                Int32 exitCode       = -1;
                var   processInvoker = new ProcessInvoker();
                processInvoker.Initialize(hc);
#if OS_WINDOWS
                exitCode = await processInvoker.ExecuteAsync("", "cmd.exe", "/c \"dir >nul\"", null, CancellationToken.None);
#endif
#if (OS_OSX || OS_LINUX)
                exitCode = await processInvoker.ExecuteAsync("", "bash", "-c echo .", null, CancellationToken.None);
#endif

                trace.Info("Exit Code: {0}", exitCode);
                Assert.Equal(0, exitCode);
            }
        }
コード例 #4
0
        public async Task SuccessExitsWithCodeZero()
        {
            using (TestHostContext hc = new TestHostContext(this))
            using (var tokenSource = new CancellationTokenSource())
            {
                Tracing trace = hc.GetTrace();

                Int32 exitCode = -1;
                var processInvoker = new ProcessInvoker();
                processInvoker.Initialize(hc);
#if OS_WINDOWS
                exitCode = await processInvoker.ExecuteAsync("", "cmd.exe", "/c \"dir >nul\"", null, tokenSource.Token);
#endif
#if (OS_OSX || OS_LINUX)
                exitCode = await processInvoker.ExecuteAsync("", "bash", "-c echo .", null, tokenSource.Token);
#endif

                trace.Info("Exit Code: {0}", exitCode);
                Assert.Equal(0, exitCode);
            }
        }
コード例 #5
0
ファイル: ProcessInvokerL0.cs プロジェクト: jikuma/vsts
        public async Task DefaultsToCurrentSystemOemEncoding()
        {
            // This test verifies that the additional code pages encoding provider is registered.
            // By default, only Unicode encodings, ASCII, and code page 28591 are supported. An
            // additional provider must be registered to support the full set of encodings that
            // were included in Full .NET prior to 4.6.
            //
            // For example, on an en-US box, this is required for loading the encoding for the
            // default console output code page '437'. Without loading the correct encoding for
            // code page IBM437, some characters cannot be translated correctly, e.g. write 'ç'
            // from powershell.exe.
            using (TestHostContext hc = new TestHostContext(this))
            {
                Tracing trace          = hc.GetTrace();
                var     processInvoker = new ProcessInvoker();
                processInvoker.Initialize(hc);
                var stdout = new List <string>();
                var stderr = new List <string>();
                processInvoker.OutputDataReceived += (object sender, ProcessDataReceivedEventArgs e) =>
                {
                    stdout.Add(e.Data);
                };
                processInvoker.ErrorDataReceived += (object sender, ProcessDataReceivedEventArgs e) =>
                {
                    stderr.Add(e.Data);
                };
                await processInvoker.ExecuteAsync(
                    workingDirectory : "",
                    fileName : "powershell.exe",
                    arguments : $@"-NoLogo -Sta -NoProfile -NonInteractive -ExecutionPolicy Unrestricted -Command ""Write-Host 'From STDOUT ''ç''' ; Write-Error 'From STDERR ''ç'''""",
                    environment : null,
                    requireExitCodeZero : false,
                    cancellationToken : CancellationToken.None);

                Assert.Equal(1, stdout.Count);
                Assert.Equal("From STDOUT 'ç'", stdout[0]);
                Assert.True(stderr.Count > 0);
                Assert.True(stderr[0].Contains("From STDERR 'ç'"));
            }
        }
コード例 #6
0
ファイル: IOUtilL0.cs プロジェクト: gcbpay/VSTR-Agent-account
        private static async Task CreateDirectoryReparsePoint(IHostContext context, string link, string target)
        {
#if OS_WINDOWS
            string fileName  = Environment.GetEnvironmentVariable("ComSpec");
            string arguments = $@"/c ""mklink /J ""{link}"" {target}""""";
#else
            string fileName  = "/bin/ln";
            string arguments = $@"-s ""{target}"" ""{link}""";
#endif
            ArgUtil.File(fileName, nameof(fileName));
            using (var processInvoker = new ProcessInvoker())
            {
                processInvoker.Initialize(context);
                await processInvoker.ExecuteAsync(
                    workingDirectory : context.GetDirectory(WellKnownDirectory.Bin),
                    fileName : fileName,
                    arguments : arguments,
                    environment : null,
                    requireExitCodeZero : true,
                    cancellationToken : CancellationToken.None);
            }
        }
コード例 #7
0
ファイル: IOUtilL0.cs プロジェクト: codedebug/vsts-agent
        private static async Task CreateDirectoryReparsePoint(IHostContext context, string link, string target)
        {
#if OS_WINDOWS
            string fileName = Environment.GetEnvironmentVariable("ComSpec");
            string arguments = $@"/c ""mklink /J ""{link}"" {target}""""";
#else
            string fileName = "/bin/ln";
            string arguments = $@"-s ""{target}"" ""{link}""";
#endif
            ArgUtil.File(fileName, nameof(fileName));
            using (var processInvoker = new ProcessInvoker())
            {
                processInvoker.Initialize(context);
                await processInvoker.ExecuteAsync(
                    workingDirectory: IOUtil.GetBinPath(),
                    fileName: fileName,
                    arguments: arguments,
                    environment: null,
                    requireExitCodeZero: true,
                    cancellationToken: CancellationToken.None);
            }
        }