/// <summary>
/// Process to create element quantity.
/// </summary>
/// <param name="file">The IFC file.</param>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="extrusionCreationData">The IFCExtrusionCreationData.</param>
/// <param name="element">The element of which this property is created for.</param>
/// <param name="elementType">The element type of which this quantity is created for.</param>
/// <returns>The created quantity handle.</returns>
public IFCAnyHandle ProcessEntry(IFCFile file, ExporterIFC exporterIFC, IFCExtrusionCreationData extrusionCreationData,
Element element, ElementType elementType, QuantityEntry parentEntry)
{
bool useProperty = (!String.IsNullOrEmpty(RevitParameterName)) || (RevitBuiltInParameter != BuiltInParameter.INVALID);
bool success = false;
object val = 0;
if (useProperty)
{
double dblVal = 0.0;
if (parentEntry.QuantityType is QuantityType.Count)
{
int?intValPar = null;
intValPar = (ParameterUtil.GetIntValueFromElementOrSymbol(element, RevitParameterName));
if (intValPar.HasValue)
{
success = true;
val = intValPar.Value;
}
}
else
{
success = (ParameterUtil.GetDoubleValueFromElementOrSymbol(element, RevitParameterName, parentEntry.IgnoreInternalValue, out dblVal) != null);
if (!success && RevitBuiltInParameter != BuiltInParameter.INVALID)
{
success = (ParameterUtil.GetDoubleValueFromElementOrSymbol(element, RevitBuiltInParameter, out dblVal) != null);
}
if (success)
{
val = dblVal;
}
}
if (success) // factor in the scale factor for all the parameters depending of the data type to get the correct value
{
switch (parentEntry.QuantityType)
{
case QuantityType.PositiveLength:
case QuantityType.Length:
val = UnitUtil.ScaleLength((double)val);
break;
case QuantityType.Area:
val = UnitUtil.ScaleArea((double)val);
break;
case QuantityType.Volume:
val = UnitUtil.ScaleVolume((double)val);
break;
case QuantityType.Count:
break;
case QuantityType.Time:
break;
default:
break;
}
}
}
if (PropertyCalculator != null && !success)
{
success = PropertyCalculator.Calculate(exporterIFC, extrusionCreationData, element, elementType, this);
if (success && parentEntry.QuantityType == QuantityType.Count)
{
val = PropertyCalculator.GetIntValue();
}
else
{
val = PropertyCalculator.GetDoubleValue();
}
}
IFCAnyHandle quantityHnd = null;
if (success)
{
switch (parentEntry.QuantityType)
{
case QuantityType.PositiveLength:
case QuantityType.Length:
quantityHnd = IFCInstanceExporter.CreateQuantityLength(file, parentEntry.PropertyName, parentEntry.MethodOfMeasurement, null, (double)val);
break;
case QuantityType.Area:
quantityHnd = IFCInstanceExporter.CreateQuantityArea(file, parentEntry.PropertyName, parentEntry.MethodOfMeasurement, null, (double)val);
break;
case QuantityType.Volume:
quantityHnd = IFCInstanceExporter.CreateQuantityVolume(file, parentEntry.PropertyName, parentEntry.MethodOfMeasurement, null, (double)val);
break;
case QuantityType.Weight:
quantityHnd = IFCInstanceExporter.CreateQuantityWeight(file, parentEntry.PropertyName, parentEntry.MethodOfMeasurement, null, (double)val);
break;
case QuantityType.Count:
quantityHnd = IFCInstanceExporter.CreateQuantityCount(file, parentEntry.PropertyName, parentEntry.MethodOfMeasurement, null, (int)val);
break;
case QuantityType.Time:
quantityHnd = IFCInstanceExporter.CreateQuantityTime(file, parentEntry.PropertyName, parentEntry.MethodOfMeasurement, null, (double)val);
break;
default:
throw new InvalidOperationException("Missing case!");
}
}
return(quantityHnd);
}
/// <summary>
/// Exports a generic family instance as IFC instance.
/// </summary>
/// <param name="type">The export type.</param>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="familyInstance">The element.</param>
/// <param name="wrapper">The ProductWrapper.</param>
/// <param name="setter">The PlacementSetter.</param>
/// <param name="extraParams">The extrusion creation data.</param>
/// <param name="instanceGUID">The guid.</param>
/// <param name="ownerHistory">The owner history handle.</param>
/// <param name="instanceName">The name.</param>
/// <param name="instanceDescription">The description.</param>
/// <param name="instanceObjectType">The object type.</param>
/// <param name="productRepresentation">The representation handle.</param>
/// <param name="instanceTag">The tag for the entity, usually based on the element id.</param>
/// <param name="ifcEnumType">The predefined type/shape type, if any, for the object.</param>
/// <param name="overrideLocalPlacement">The local placement to use instead of the one in the placement setter, if appropriate.</param>
/// <returns>The handle.</returns>
public static IFCAnyHandle ExportGenericInstance(IFCExportInfoPair type,
ExporterIFC exporterIFC, Element familyInstance,
ProductWrapper wrapper, PlacementSetter setter, IFCExtrusionCreationData extraParams,
string instanceGUID, IFCAnyHandle ownerHistory, IFCAnyHandle productRepresentation,
string ifcEnumType, IFCAnyHandle overrideLocalPlacement)
{
IFCFile file = exporterIFC.GetFile();
Document doc = familyInstance.Document;
bool isRoomRelated = IsRoomRelated(type);
bool isChildInContainer = familyInstance.AssemblyInstanceId != ElementId.InvalidElementId;
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
ElementId roomId = ElementId.InvalidElementId;
if (isRoomRelated)
{
roomId = setter.UpdateRoomRelativeCoordinates(familyInstance, out localPlacementToUse);
}
//should remove the create method where there is no use of this handle for API methods
//some places uses the return value of ExportGenericInstance as input parameter for API methods
IFCAnyHandle instanceHandle = null;
switch (type.ExportInstance)
{
case IFCEntityType.IfcBeam:
{
string preDefinedType = string.IsNullOrWhiteSpace(type.ValidatedPredefinedType) ? "BEAM" : type.ValidatedPredefinedType;
instanceHandle = IFCInstanceExporter.CreateBeam(exporterIFC, familyInstance, instanceGUID, ownerHistory,
localPlacementToUse, productRepresentation, preDefinedType);
break;
}
case IFCEntityType.IfcColumn:
{
string preDefinedType = string.IsNullOrWhiteSpace(type.ValidatedPredefinedType) ? "COLUMN" : type.ValidatedPredefinedType;
instanceHandle = IFCInstanceExporter.CreateColumn(exporterIFC, familyInstance, instanceGUID, ownerHistory,
localPlacementToUse, productRepresentation, preDefinedType);
break;
}
case IFCEntityType.IfcCurtainWall:
{
instanceHandle = IFCInstanceExporter.CreateCurtainWall(exporterIFC, familyInstance, instanceGUID, ownerHistory,
localPlacementToUse, productRepresentation, type.ValidatedPredefinedType);
break;
}
case IFCEntityType.IfcMember:
{
string preDefinedType = string.IsNullOrWhiteSpace(type.ValidatedPredefinedType) ? "BRACE" : type.ValidatedPredefinedType;
instanceHandle = IFCInstanceExporter.CreateMember(exporterIFC, familyInstance, instanceGUID, ownerHistory,
localPlacementToUse, productRepresentation, preDefinedType);
// Register the members's IFC handle for later use by truss export.
ExporterCacheManager.ElementToHandleCache.Register(familyInstance.Id, instanceHandle);
break;
}
case IFCEntityType.IfcPlate:
{
IFCAnyHandle localPlacement = localPlacementToUse;
if (overrideLocalPlacement != null)
{
isChildInContainer = true;
localPlacement = overrideLocalPlacement;
}
string preDefinedType = string.IsNullOrWhiteSpace(type.ValidatedPredefinedType) ? "NOTDEFINED" : type.ValidatedPredefinedType;
instanceHandle = IFCInstanceExporter.CreatePlate(exporterIFC, familyInstance, instanceGUID, ownerHistory,
localPlacement, productRepresentation, preDefinedType);
break;
}
case IFCEntityType.IfcMechanicalFastener:
{
double?nominalDiameter = null;
double?nominalLength = null;
double nominalDiameterVal, nominalLengthVal;
if (ParameterUtil.GetDoubleValueFromElementOrSymbol(familyInstance, "NominalDiameter", out nominalDiameterVal) != null)
{
nominalDiameter = UnitUtil.ScaleLength(nominalDiameterVal);
}
if (ParameterUtil.GetDoubleValueFromElementOrSymbol(familyInstance, "NominalLength", out nominalLengthVal) != null)
{
nominalLength = UnitUtil.ScaleLength(nominalLengthVal);
}
string preDefinedType = string.IsNullOrWhiteSpace(type.ValidatedPredefinedType) ? "NOTDEFINED" : type.ValidatedPredefinedType;
instanceHandle = IFCInstanceExporter.CreateMechanicalFastener(exporterIFC, familyInstance, instanceGUID, ownerHistory,
localPlacementToUse, productRepresentation, nominalDiameter, nominalLength, preDefinedType);
break;
}
case IFCEntityType.IfcRailing:
{
//string strEnumType;
//IFCExportInfoPair exportAs = ExporterUtil.GetExportType(exporterIFC, familyInstance, out strEnumType);
//if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
//{
// instanceHandle = IFCInstanceExporter.CreateRailing(exporterIFC, familyInstance, instanceGUID, ownerHistory,
// localPlacementToUse, productRepresentation, GetPreDefinedType<Toolkit.IFC4.IFCRailingType>(familyInstance, strEnumType).ToString());
//}
//else
//{
// instanceHandle = IFCInstanceExporter.CreateRailing(exporterIFC, familyInstance, instanceGUID, ownerHistory,
// localPlacementToUse, productRepresentation, GetPreDefinedType<Toolkit.IFCRailingType>(familyInstance, strEnumType).ToString());
//}
string preDefinedType = string.IsNullOrWhiteSpace(type.ValidatedPredefinedType) ? "NOTDEFINED" : type.ValidatedPredefinedType;
instanceHandle = IFCInstanceExporter.CreateRailing(exporterIFC, familyInstance, instanceGUID, ownerHistory,
localPlacementToUse, productRepresentation, preDefinedType);
break;
}
case IFCEntityType.IfcSpace:
{
IFCInternalOrExternal internalOrExternal = CategoryUtil.IsElementExternal(familyInstance) ? IFCInternalOrExternal.External : IFCInternalOrExternal.Internal;
instanceHandle = IFCInstanceExporter.CreateSpace(exporterIFC, familyInstance, instanceGUID, ownerHistory,
localPlacementToUse, productRepresentation, IFCElementComposition.Element, internalOrExternal);
break;
}
default:
{
// !!! These entities are deprecated in IFC4 and will be made abstract in the next version.
// It is still kept as it is because if we generate an IfcBuildingElementProxy, teh connectivity will be lost
if (ExporterCacheManager.ExportOptionsCache.ExportAs4 &&
(type.ExportInstance == IFCEntityType.IfcDistributionElement ||
type.ExportInstance == IFCEntityType.IfcEnergyConversionDevice ||
type.ExportInstance == IFCEntityType.IfcFlowController ||
type.ExportInstance == IFCEntityType.IfcFlowFitting ||
type.ExportInstance == IFCEntityType.IfcFlowMovingDevice ||
type.ExportInstance == IFCEntityType.IfcFlowSegment ||
type.ExportInstance == IFCEntityType.IfcFlowStorageDevice ||
type.ExportInstance == IFCEntityType.IfcFlowTerminal ||
type.ExportInstance == IFCEntityType.IfcFlowTreatmentDevice))
{
instanceHandle = IFCInstanceExporter.CreateGenericIFCEntity(type, exporterIFC, familyInstance, instanceGUID, ownerHistory,
localPlacementToUse, productRepresentation);
}
else
{
if (type.ExportInstance != IFCEntityType.UnKnown)
{
instanceHandle = IFCInstanceExporter.CreateGenericIFCEntity(type, exporterIFC, familyInstance, instanceGUID, ownerHistory,
localPlacementToUse, productRepresentation);
}
}
break;
}
}
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(instanceHandle))
{
bool containedInSpace = (roomId != ElementId.InvalidElementId);
bool associateToLevel = containedInSpace ? false : !isChildInContainer;
wrapper.AddElement(familyInstance, instanceHandle, setter, extraParams, associateToLevel);
if (containedInSpace)
{
ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomId, instanceHandle);
}
}
return(instanceHandle);
}
/// <summary>
/// Exports a Rebar to IFC ReinforcingBar.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="rebarItem">The rebar to be exported. This might be an element or a sub-element.</param>
/// <param name="rebarElement">The element that contains the rebar to be exported. This may be the same as rebarItem.</param>
/// <param name="itemIndex">If greater than 0, the index of the first rebar in the rebarItem in the rebarElement, used for naming and GUID creation.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
/// <returns>The set of handles created, to add to the ProductWrapper in the calling function.</returns>
private static ISet <DelayedProductWrapper> ExportRebar(ExporterIFC exporterIFC, object rebarItem, Element rebarElement, int itemIndex, ProductWrapper productWrapper)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcReinforcingBar", out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return(null);
}
}
IFCFile file = exporterIFC.GetFile();
HashSet <DelayedProductWrapper> createdRebars = new HashSet <DelayedProductWrapper>();
int rebarQuantity = GetRebarQuantity(rebarItem);
if (rebarQuantity == 0)
{
return(null);
}
using (IFCTransaction transaction = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, rebarElement))
{
bool cannotExportRebar = false;
IFCAnyHandle rebarHandle = ExportRebarAsProxyElementInView(exporterIFC, rebarElement, productWrapper, out cannotExportRebar);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(rebarHandle) || cannotExportRebar)
{
if (!cannotExportRebar)
{
transaction.Commit();
}
return(null); // Rebar doesn't create a group.
}
IFCAnyHandle prodRep = null;
double totalBarLengthUnscale = GetRebarTotalLength(rebarItem);
double volumeUnscale = GetRebarVolume(rebarItem);
double totalBarLength = UnitUtil.ScaleLength(totalBarLengthUnscale);
if (MathUtil.IsAlmostZero(totalBarLength))
{
return(null);
}
ElementId materialId = ElementId.InvalidElementId;
ParameterUtil.GetElementIdValueFromElementOrSymbol(rebarElement, BuiltInParameter.MATERIAL_ID_PARAM, out materialId);
double diameter = GetBarDiameter(rebarItem);
double radius = diameter / 2.0;
double longitudinalBarNominalDiameter = diameter;
double longitudinalBarCrossSectionArea = UnitUtil.ScaleArea(volumeUnscale / totalBarLengthUnscale);
int numberOfBarPositions = GetNumberOfBarPositions(rebarItem);
string steelGrade = NamingUtil.GetOverrideStringValue(rebarElement, "SteelGrade", null);
// Allow use of IFC2x3 or IFC4 naming.
string predefinedType = NamingUtil.GetOverrideStringValue(rebarElement, "BarRole", null);
if (string.IsNullOrWhiteSpace(predefinedType))
{
predefinedType = NamingUtil.GetOverrideStringValue(rebarElement, "PredefinedType", null);
}
IFCReinforcingBarRole role = GetReinforcingBarRole(predefinedType);
string origRebarName = NamingUtil.GetNameOverride(rebarElement, NamingUtil.GetIFCName(rebarElement));
const int maxBarGUIDS = IFCReinforcingBarSubElements.BarEnd - IFCReinforcingBarSubElements.BarStart + 1;
ElementId categoryId = CategoryUtil.GetSafeCategoryId(rebarElement);
IFCAnyHandle originalPlacement = setter.LocalPlacement;
// Potential issue : totalBarLength has a rounded value but individual lengths (from centerlines) do not have rounded values.
// Also dividing a rounded totalBarLength does not result in barLength rounded by the same round value.
double barLength = totalBarLength / rebarQuantity;
IList <Curve> baseCurves = GetRebarCenterlineCurves(rebarItem, true, false, false);
ElementId barLengthParamId = new ElementId(BuiltInParameter.REBAR_ELEM_LENGTH);
ParameterSet rebarElementParams = rebarElement.Parameters;
for (int ii = 0; ii < numberOfBarPositions; ii++)
{
if (!DoesBarExistAtPosition(rebarItem, ii))
{
continue;
}
Rebar rebar = rebarElement as Rebar;
if ((rebar != null) && (rebar.DistributionType == DistributionType.VaryingLength || rebar.IsRebarFreeForm()))
{
baseCurves = GetRebarCenterlineCurves(rebar, true, false, false, MultiplanarOption.IncludeOnlyPlanarCurves, ii);
DoubleParameterValue barLengthParamVal = rebar.GetParameterValueAtIndex(barLengthParamId, ii) as DoubleParameterValue;
if (barLengthParamVal != null)
{
barLength = barLengthParamVal.Value;
}
}
int indexForNamingAndGUID = (itemIndex > 0) ? ii + itemIndex : ii + 1;
string rebarName = NamingUtil.GetNameOverride(rebarElement, origRebarName + ": " + indexForNamingAndGUID);
Transform barTrf = GetBarPositionTransform(rebarItem, ii);
IList <Curve> curves = new List <Curve>();
double endParam = 0.0;
foreach (Curve baseCurve in baseCurves)
{
if (baseCurve is Arc || baseCurve is Ellipse)
{
if (baseCurve.IsBound)
{
endParam += UnitUtil.ScaleAngle(baseCurve.GetEndParameter(1) - baseCurve.GetEndParameter(0));
}
else
{
endParam += UnitUtil.ScaleAngle(2 * Math.PI);
}
}
else
{
endParam += 1.0;
}
curves.Add(baseCurve.CreateTransformed(barTrf));
}
IFCAnyHandle compositeCurve = GeometryUtil.CreateCompositeCurve(exporterIFC, curves);
IFCAnyHandle sweptDiskSolid = IFCInstanceExporter.CreateSweptDiskSolid(file, compositeCurve, radius, null, 0, endParam);
HashSet <IFCAnyHandle> bodyItems = new HashSet <IFCAnyHandle>();
bodyItems.Add(sweptDiskSolid);
IFCAnyHandle shapeRep = RepresentationUtil.CreateAdvancedSweptSolidRep(exporterIFC, rebarElement, categoryId, exporterIFC.Get3DContextHandle("Body"), bodyItems, null);
IList <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>();
shapeReps.Add(shapeRep);
prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps);
IFCAnyHandle copyLevelPlacement = (ii == 0) ? originalPlacement : ExporterUtil.CopyLocalPlacement(file, originalPlacement);
string rebarGUID = (indexForNamingAndGUID < maxBarGUIDS) ?
GUIDUtil.CreateSubElementGUID(rebarElement, indexForNamingAndGUID + (int)IFCReinforcingBarSubElements.BarStart - 1) :
GUIDUtil.CreateGUID();
IFCAnyHandle elemHnd = IFCInstanceExporter.CreateReinforcingBar(exporterIFC, rebarElement, rebarGUID, ExporterCacheManager.OwnerHistoryHandle,
copyLevelPlacement, prodRep, steelGrade, longitudinalBarNominalDiameter, longitudinalBarCrossSectionArea, barLength, role, null);
IFCAnyHandleUtil.SetAttribute(elemHnd, "Name", rebarName);
// We will not add the element ot the productWrapper here, but instead in the function that calls
// ExportRebar. The reason for this is that we don't currently know if the handles such be associated
// to the level or not, depending on whether they will or won't be grouped.
createdRebars.Add(new DelayedProductWrapper(rebarElement, elemHnd, setter.LevelInfo));
CacheSubelementParameterValues(rebarElement, rebarElementParams, ii, elemHnd);
ExporterCacheManager.HandleToElementCache.Register(elemHnd, rebarElement.Id);
CategoryUtil.CreateMaterialAssociation(exporterIFC, elemHnd, materialId);
}
}
transaction.Commit();
}
return(createdRebars);
}
/// <summary>
/// Exports a roof to IfcRoof.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="ifcEnumType">The roof type.</param>
/// <param name="roof">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportRoof(ExporterIFC exporterIFC, string ifcEnumType, Element roof, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (roof == null || geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, roof))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// If the roof is an in-place family, we will allow any arbitrary orientation. While this may result in some
// in-place "cubes" exporting with the wrong direction, it is unlikely that an in-place family would be
// used for this reason in the first place.
ecData.PossibleExtrusionAxes = (roof is FamilyInstance) ? IFCExtrusionAxes.TryXYZ : IFCExtrusionAxes.TryZ;
ecData.AreInnerRegionsOpenings = true;
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(roof);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
BodyData bodyData;
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, roof,
categoryId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return;
}
bool exportSlab = ecData.ScaledLength > MathUtil.Eps();
string guid = GUIDUtil.CreateGUID(roof);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
//string predefinedType = GetIFCRoofType(ifcEnumType);
string predefinedType = IFCValidateEntry.GetValidIFCPredefinedTypeType(ifcEnumType, "NOTDEFINED", IFCEntityType.IfcRoofType.ToString());
IFCAnyHandle roofHnd = IFCInstanceExporter.CreateRoof(exporterIFC, roof, guid, ownerHistory,
localPlacement, exportSlab ? null : representation, predefinedType);
// Export IfcRoofType
IFCExportInfoPair exportInfo = new IFCExportInfoPair(IFCEntityType.IfcRoof, IFCEntityType.IfcRoofType, predefinedType);
if (exportInfo.ExportType != IFCEntityType.UnKnown)
{
string overridePDefType;
if (ParameterUtil.GetStringValueFromElementOrSymbol(roof, "IfcExportType", out overridePDefType) == null) // change IFCType to consistent parameter of IfcExportType
{
if (ParameterUtil.GetStringValueFromElementOrSymbol(roof, "IfcType", out overridePDefType) == null) // support IFCType for legacy support
{
if (string.IsNullOrEmpty(predefinedType))
{
predefinedType = "NOTDEFINED";
}
}
}
if (!string.IsNullOrEmpty(overridePDefType))
{
exportInfo.ValidatedPredefinedType = overridePDefType;
}
else
{
exportInfo.ValidatedPredefinedType = predefinedType;
}
IFCAnyHandle typeHnd = ExporterUtil.CreateGenericTypeFromElement(roof, exportInfo, file, ownerHistory, predefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(typeHnd, roofHnd);
}
productWrapper.AddElement(roof, roofHnd, placementSetter.LevelInfo, ecData, true);
// will export its host object materials later if it is a roof
if (!(roof is RoofBase))
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, roofHnd, bodyData.MaterialIds);
}
if (exportSlab)
{
string slabGUID = GUIDUtil.CreateSubElementGUID(roof, (int)IFCRoofSubElements.RoofSlabStart);
string slabName = IFCAnyHandleUtil.GetStringAttribute(roofHnd, "Name") + ":1";
IFCAnyHandle slabLocalPlacementHnd = ExporterUtil.CopyLocalPlacement(file, localPlacement);
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(exporterIFC, roof, slabGUID, ownerHistory,
slabLocalPlacementHnd, representation, slabRoofPredefinedType);
IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, slabName);
Transform offsetTransform = (bodyData != null) ? bodyData.OffsetTransform : Transform.Identity;
OpeningUtil.CreateOpeningsIfNecessary(slabHnd, roof, ecData, offsetTransform,
exporterIFC, slabLocalPlacementHnd, placementSetter, productWrapper);
ExporterUtil.RelateObject(exporterIFC, roofHnd, slabHnd);
productWrapper.AddElement(null, slabHnd, placementSetter.LevelInfo, ecData, false);
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, bodyData.MaterialIds);
// Create type
IFCExportInfoPair slabRoofExportType = new IFCExportInfoPair();
slabRoofExportType.SetValueWithPair(IFCEntityType.IfcSlab);
IFCAnyHandle slabRoofTypeHnd = ExporterUtil.CreateGenericTypeFromElement(roof, slabRoofExportType, exporterIFC.GetFile(), ownerHistory, slabRoofPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(slabRoofTypeHnd, slabHnd);
}
}
tr.Commit();
}
}
}
/// <summary>
/// Exports a gutter element.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportGutter(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcPipeSegmentType;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(setter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle bodyRep = BodyExporter.ExportBody(exporterIFC, element, categoryId, ElementId.InvalidElementId,
geometryElement, bodyExporterOptions, ecData).RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
if (ecData != null)
{
ecData.ClearOpenings();
}
return;
}
string originalTag = NamingUtil.CreateIFCElementId(element);
// In Revit, we don't have a corresponding type, so we create one for every gutter.
IFCAnyHandle origin = ExporterUtil.CreateAxis2Placement3D(file);
IFCAnyHandle repMap3dHnd = IFCInstanceExporter.CreateRepresentationMap(file, origin, bodyRep);
List <IFCAnyHandle> repMapList = new List <IFCAnyHandle>();
repMapList.Add(repMap3dHnd);
string elementTypeName = NamingUtil.CreateIFCObjectName(exporterIFC, element);
string typeGuid = GUIDUtil.CreateSubElementGUID(element, (int)IFCHostedSweepSubElements.PipeSegmentType);
IFCAnyHandle style = IFCInstanceExporter.CreatePipeSegmentType(file, null, null, repMapList, IFCPipeSegmentType.Gutter);
IFCAnyHandleUtil.OverrideNameAttribute(style, elementTypeName);
IFCExportInfoPair exportInfo = new IFCExportInfoPair(IFCEntityType.IfcPipeSegmentType, IFCPipeSegmentType.Gutter.ToString());
IFCAnyHandleUtil.SetAttribute(style, "Tag", originalTag);
ExporterUtil.SetGlobalId(style, typeGuid);
IFCAnyHandleUtil.SetAttribute(style, "ElementType", elementTypeName);
List <IFCAnyHandle> representationMaps = GeometryUtil.GetRepresentationMaps(style);
IFCAnyHandle mappedItem = ExporterUtil.CreateDefaultMappedItem(file, representationMaps[0]);
ISet <IFCAnyHandle> representations = new HashSet <IFCAnyHandle>();
representations.Add(mappedItem);
IFCAnyHandle bodyMappedItemRep = RepresentationUtil.CreateBodyMappedItemRep(exporterIFC,
element, categoryId, exporterIFC.Get3DContextHandle("Body"), representations);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyMappedItemRep))
{
return;
}
List <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>();
shapeReps.Add(bodyMappedItemRep);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity);
if (boundingBoxRep != null)
{
shapeReps.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps);
IFCAnyHandle localPlacementToUse;
ElementId roomId = setter.UpdateRoomRelativeCoordinates(element, out localPlacementToUse);
if (roomId == ElementId.InvalidElementId)
{
localPlacementToUse = ecData.GetLocalPlacement();
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle elemHnd = IFCInstanceExporter.CreateFlowSegment(exporterIFC, element, guid,
ExporterCacheManager.OwnerHistoryHandle, localPlacementToUse, prodRep);
bool containedInSpace = (roomId != ElementId.InvalidElementId);
productWrapper.AddElement(element, elemHnd, setter.LevelInfo, ecData, !containedInSpace, exportInfo);
if (containedInSpace)
{
ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomId, elemHnd);
}
// Associate segment with type.
ExporterCacheManager.TypeRelationsCache.Add(style, elemHnd);
OpeningUtil.CreateOpeningsIfNecessary(elemHnd, element, ecData, null,
exporterIFC, localPlacementToUse, setter, productWrapper);
}
tr.Commit();
}
}
}
/// <summary>
/// Exports a CeilingAndFloor element to IFC.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, ref GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, floorElement, out ifcEnumType);
IFCAnyHandle type = null;
if (!ElementFilteringUtil.IsElementVisible(floorElement))
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportInstance.ToString(), out elementClassTypeEnum) ||
Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
Document doc = floorElement.Document;
using (SubTransaction tempPartTransaction = new SubTransaction(doc))
{
MaterialLayerSetInfo layersetInfo = new MaterialLayerSetInfo(exporterIFC, floorElement, productWrapper);
// For IFC4RV export, Element will be split into its parts(temporarily) in order to export the wall by its parts
// If Parts are created by code and not by user then their names should be equal to Material names.
bool setMaterialNameToPartName = ExporterUtil.CreateParts(floorElement, layersetInfo.MaterialIds.Count, ref geometryElement);
ExporterUtil.ExportPartAs exportPartAs = ExporterUtil.CanExportByComponentsOrParts(floorElement);
bool exportByComponents = exportPartAs == ExporterUtil.ExportPartAs.ShapeAspect;
bool exportParts = exportPartAs == ExporterUtil.ExportPartAs.Part;
if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false))
{
return;
}
using (IFCTransaction tr = new IFCTransaction(file))
{
bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor));
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
// Try to export the Floor slab as a container. If that succeeds, we are done.
// If we do export the floor as a container, it will take care of the local placement and transform there, so we need to leave
// this out of the IFCTransformSetter and PlacementSetter scopes below, or else we'll get double transforms.
IFCAnyHandle floorHnd = RoofExporter.ExportRoofOrFloorAsContainer(exporterIFC, floorElement, geometryElement, productWrapper);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(floorHnd))
{
tr.Commit();
return;
}
}
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, floorElement, out overrideContainerHnd);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
// The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association.
// Disable calling ExportSlabAsExtrusion if we can't handle potential openings.
bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null && !ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView;
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (!exportParts)
{
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
Floor floor = floorElement as Floor;
// Next, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(floorElement.Document, exporterIFC, ref solids, ref meshes);
if (solids.Count == 1 && meshes.Count == 0)
{
// floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go through the Revit model origin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorBasePlane = GeometryUtil.CreatePlaneByNormalAtOrigin(floorDir);
GenerateAdditionalInfo additionalInfo = GenerateAdditionalInfo.GenerateBody;
additionalInfo |= ExporterCacheManager.ExportOptionsCache.ExportAs4 ?
GenerateAdditionalInfo.GenerateFootprint : GenerateAdditionalInfo.None;
// Skip generate body item for IFC4RV. It will be handled later in PartExporter.ExportHostPartAsShapeAspects()
if (exportByComponents)
{
additionalInfo &= ~GenerateAdditionalInfo.GenerateBody;
}
ExtrusionExporter.ExtraClippingData extraClippingData = null;
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement, false,
catId, solids[0], extrusionAnalyzerFloorBasePlane, floorOrigin, floorExtrusionDirection, null,
out extraClippingData,
addInfo: additionalInfo);
if (extraClippingData.CompletelyClipped)
{
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
if (floorAndProperties.Handle != null)
{
representations.Add(floorAndProperties.Handle);
repTypes.Add(ShapeRepresentationType.SweptSolid);
}
// Footprint representation will only be exported in export to IFC4
if (((additionalInfo & GenerateAdditionalInfo.GenerateFootprint) != 0) && (floorAndProperties.FootprintInfo != null))
{
IFCAnyHandle footprintShapeRep = floorAndProperties.FootprintInfo.CreateFootprintShapeRepresentation(exporterIFC);
representations.Add(footprintShapeRep);
}
if (exportByComponents)
{
IFCAnyHandle prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, representations);
prodReps.Add(prodRep);
}
else if (representations.Count > 0 && floorAndProperties.Handle != null) // Only when at least the body rep exists will come here
{
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
}
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0 && canExportAsInternalExtrusion && !exportByComponents)
{
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
PotentiallyFixPresentationLayerAssignment(floorElement, prodReps);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
// Footprint representation will only be exported in export to IFC4
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
if (extrusionLoops.Count > ii)
{
if (extrusionLoops[ii].Count > 0)
{
// Get the extrusion footprint using the first Curveloop. Transform needs to be obtained from the returned local placement
Transform lcs = ExporterIFCUtils.GetUnscaledTransform(exporterIFC, localPlacements[ii]);
IFCAnyHandle footprintGeomRepItem = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, extrusionLoops[ii][0], lcs, floorPlane.Normal);
IFCAnyHandle contextOfItemsFootprint = exporterIFC.Get3DContextHandle("FootPrint");
ISet <IFCAnyHandle> repItem = new HashSet <IFCAnyHandle>();
repItem.Add(footprintGeomRepItem);
IFCAnyHandle footprintShapeRepresentation = RepresentationUtil.CreateBaseShapeRepresentation(exporterIFC, contextOfItemsFootprint, "FootPrint", "Curve2D", repItem);
IList <IFCAnyHandle> reps = new List <IFCAnyHandle>();
reps.Add(footprintShapeRepresentation);
IFCAnyHandleUtil.AddRepresentations(prodReps[ii], reps);
}
}
}
}
}
IFCAnyHandle prodDefHnd;
if (prodReps.Count == 0)
{
if (exportByComponents)
{
prodDefHnd = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, null);
prodReps.Add(prodDefHnd);
}
else
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// Brep representation using tesellation after ExportSlabAsExtrusion does not return prodReps
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
// Deal with a couple of cases that have non-standard defaults.
switch (exportType.ExportInstance)
{
case IFCEntityType.IfcCovering:
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING");
break;
case IFCEntityType.IfcSlab:
bool isBaseSlab = false;
#pragma warning disable CS0612, CS0618//AnalyticalModel is obsolette
AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel();
if (analyticalModel != null)
{
AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs();
isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat);
}
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR");
break;
#pragma warning restore CS0612, CS0618
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
slabHnd = IFCInstanceExporter.CreateGenericIFCEntity(exportType, exporterIFC, floorElement, currentGUID, ownerHistory,
localPlacementHnd, exportParts ? null : prodReps[ii]);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (!string.IsNullOrEmpty(ifcName))
{
IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, ifcName);
}
// Pre IFC4 Slab does not have PredefinedType
if (!string.IsNullOrEmpty(exportType.ValidatedPredefinedType) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
IFCAnyHandleUtil.SetAttribute(slabHnd, "PredefinedType", exportType.ValidatedPredefinedType, true);
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null, setMaterialNameToPartName);
}
else if (exportByComponents)
{
IFCExtrusionCreationData partECData = new IFCExtrusionCreationData();
IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, floorElement, prodReps[ii],
productWrapper, placementSetter, localPlacement, ElementId.InvalidElementId, layersetInfo, partECData);
loopExtraParams.Add(partECData);
}
slabHnds.Add(slabHnd);
// For IFC4RV, export of the geometry is already handled in PartExporter.ExportHostPartAsShapeAspects()
if (!exportParts && !exportByComponents)
{
if (repTypes[ii] == ShapeRepresentationType.Brep || repTypes[ii] == ShapeRepresentationType.Tessellation)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true, exportType);
type = ExporterUtil.CreateGenericTypeFromElement(floorElement, exportType, file, ownerHistory, exportType.ValidatedPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(type, slabHnds[ii]);
ExporterUtil.AddIntoComplexPropertyCache(slabHnds[ii], layersetInfo);
}
// This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not
// controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View
if (exportedAsInternalExtrusion)
{
ISet <IFCAnyHandle> oldCreatedObjects = productWrapper.GetAllObjects();
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
ISet <IFCAnyHandle> newCreatedObjects = productWrapper.GetAllObjects();
newCreatedObjects.ExceptWith(oldCreatedObjects);
PotentiallyFixPresentationLayerAssignment(floorElement, newCreatedObjects);
}
}
if (!exportParts)
{
if (ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, productWrapper.GetAnElement(),
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
else
{
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true, type);
}
}
}
}
tr.Commit();
return;
}
}
}
public void Execute()
{
var array = new List <JProperty>
{
new JProperty("field", this.ExpressionBuilder.GetFieldName(this.FieldExpression))
};
JProperty domain = null;
if (this.Excludes?.Any() ?? false)
{
var excludeValue = new JObject(new JProperty("excludeTags", new JArray(this.Excludes)));
domain = new JProperty("domain", excludeValue);
}
if (this.Filter != null)
{
var filter = new JProperty("filter", this.Filter.Execute());
domain = domain ?? new JProperty("domain", new JObject());
((JObject)domain.Value).Add(filter);
}
if (domain != null)
{
array.Add(domain);
}
if (this.Minimum.HasValue)
{
array.Add(new JProperty("mincount", this.Minimum.Value));
}
if (!string.IsNullOrWhiteSpace(this.Gap))
{
array.Add(new JProperty("gap", this.Gap));
}
if (!string.IsNullOrWhiteSpace(this.Start))
{
array.Add(new JProperty("start", this.Start));
}
if (!string.IsNullOrWhiteSpace(this.End))
{
array.Add(new JProperty("end", this.End));
}
if (this.HardEnd)
{
array.Add(new JProperty("hardend", true));
}
if (this.CountBefore || this.CountAfter)
{
var content = new List <string>();
if (this.CountBefore)
{
content.Add("before");
}
if (this.CountAfter)
{
content.Add("after");
}
array.Add(new JProperty("other", new JArray(content.ToArray())));
}
if (this.SortType.HasValue)
{
ParameterUtil.GetFacetSort(this.SortType.Value, out string typeName, out string sortName);
array.Add(new JProperty("sort", new JObject(new JProperty(typeName, sortName))));
}
this._result = new JProperty(this.AliasName, new JObject(new JProperty("range", new JObject(array.ToArray()))));
}
/// <summary>
/// Calculates span value for a beam.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="extrusionCreationData">
/// The IFCExtrusionCreationData.
/// </param>
/// <param name="element">
/// The element to calculate the value.
/// </param>
/// <param name="elementType">
/// The element type.
/// </param>
/// <returns>
/// True if the operation succeed, false otherwise.
/// </returns>
public override bool Calculate(ExporterIFC exporterIFC, IFCExtrusionCreationData extrusionCreationData, Element element, ElementType elementType)
{
// Check the override first from "IfcSpan" parameter, if not overriden use the geometry data from extrusion
double spanVal;
if (ParameterUtil.GetDoubleValueFromElementOrSymbol(element, "IfcSpan", out spanVal) != null)
{
m_Span = UnitUtil.ScaleLength(spanVal);
return(true);
}
if (extrusionCreationData == null || MathUtil.IsAlmostZero(extrusionCreationData.ScaledLength))
{
return(false);
}
m_Span = extrusionCreationData.ScaledLength;
AnalyticalModel elemAnalyticalModel = element.GetAnalyticalModel();
if (elemAnalyticalModel != null)
{
IList <AnalyticalModelSupport> supports = elemAnalyticalModel.GetAnalyticalModelSupports();
if (supports != null && supports.Count > 0)
{
if (supports.Count == 2)
{
AnalyticalSupportType supportType1 = supports[0].GetSupportType();
AnalyticalSupportType supportType2 = supports[1].GetSupportType();
// If there are exactly 2 supports, calculate the distance between the supports for Span (if the type is PointSupport)
if (supportType1 == AnalyticalSupportType.PointSupport && supportType2 == AnalyticalSupportType.PointSupport)
{
XYZ support1 = supports[0].GetPoint();
XYZ support2 = supports[1].GetPoint();
m_Span = UnitUtil.ScaleLength(support1.DistanceTo(support2));
}
// CurveSUpport or SurfaceSupport??
else
{
if (supportType1 == AnalyticalSupportType.PointSupport)
{
XYZ supportP = supports[0].GetPoint();
if (supportType2 == AnalyticalSupportType.CurveSupport)
{
Curve supportC = supports[1].GetCurve();
m_Span = UnitUtil.ScaleLength(supportC.Distance(supportP));
}
else if (supportType2 == AnalyticalSupportType.SurfaceSupport)
{
Face supportF = supports[1].GetFace();
m_Span = UnitUtil.ScaleLength(supportF.Project(supportP).Distance);
}
}
else if (supportType1 == AnalyticalSupportType.CurveSupport)
{
Curve supportC = supports[0].GetCurve();
if (supportType2 == AnalyticalSupportType.PointSupport)
{
XYZ supportP = supports[1].GetPoint();
m_Span = UnitUtil.ScaleLength(supportC.Distance(supportP));
}
else if (supportType2 == AnalyticalSupportType.SurfaceSupport)
{
Face supportF = supports[1].GetFace();
// TODO, how to calculate a distance from a Curve to a Face?
}
}
else if (supportType1 == AnalyticalSupportType.SurfaceSupport)
{
Face supportF = supports[0].GetFace();
if (supportType2 == AnalyticalSupportType.PointSupport)
{
XYZ supportP = supports[1].GetPoint();
m_Span = UnitUtil.ScaleLength(supportF.Project(supportP).Distance);
}
else if (supportType2 == AnalyticalSupportType.CurveSupport)
{
Curve supportC = supports[1].GetCurve();
// TODO, how to calculate a distance from a Curve to a Face?
}
}
}
}
else if (supports.Count > 2)
{
// If there are more than 2 supports, which Span to take??
}
else
{
// If only one or less support
// Otherwise do nothing, leave it to the extrusion length
}
}
else
{
// No support, do nothing. Leave the Span to be the length of the entire beam
}
}
return(true);
}
/// <summary>
/// Calculates slope value.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="extrusionCreationData">The IFCExtrusionCreationData.</param>
/// <param name="element">The element to calculate the value.</param>
/// <param name="elementType">The element type.</param>
/// <returns>True if the operation succeed, false otherwise.</returns>
public override bool Calculate(ExporterIFC exporterIFC, IFCExtrusionCreationData extrusionCreationData, Element element, ElementType elementType)
{
double slope = double.NaN;
// We may have an extrusionCreationData that doesn't have anything set. We will check this by seeing if there is a valid length set.
// This works for Beam
if (extrusionCreationData == null || MathUtil.IsAlmostZero(extrusionCreationData.ScaledLength))
{
// Try looking for parameters that we can calculate slope from.
double startParamHeight = 0.0;
double endParamHeight = 0.0;
double length = 0.0;
if ((ParameterUtil.GetDoubleValueFromElement(element, BuiltInParameter.STRUCTURAL_BEAM_END0_ELEVATION, out startParamHeight) != null) &&
(ParameterUtil.GetDoubleValueFromElement(element, BuiltInParameter.STRUCTURAL_BEAM_END1_ELEVATION, out endParamHeight) != null) &&
(ParameterUtil.GetDoubleValueFromElement(element, BuiltInParameter.INSTANCE_LENGTH_PARAM, out length) != null))
{
if (!MathUtil.IsAlmostZero(length))
{
double factor = Math.Abs(endParamHeight - startParamHeight) / length;
slope = UnitUtil.ScaleAngle(MathUtil.SafeAsin(factor));
if (!double.IsNaN(slope))
{
m_Slope = slope;
return(true);
}
}
}
}
// This works for Ramp/RampFlight
if (ParameterUtil.GetDoubleValueFromElement(element, BuiltInParameter.RAMP_ATTR_MIN_INV_SLOPE, out slope) != null)
{
m_Slope = UnitUtil.ScaleAngle(Math.Atan(slope));
return(true);
}
// For other elements with ExtrusionData. Parameter will take precedence (override)
if (ParameterUtil.GetDoubleValueFromElementOrSymbol(element, "Slope", out slope) != null)
{
m_Slope = UnitUtil.ScaleAngle(slope);
return(true);
}
if (extrusionCreationData != null)
{
if (extrusionCreationData.Slope > MathUtil.Eps())
{
m_Slope = extrusionCreationData.Slope;
return(true);
}
else
{
// For any element that has axis, the slope will be computed based on the angle of the line vector
if (element.Location != null && element.Location is LocationCurve)
{
LocationCurve axis = element.Location as LocationCurve;
if (axis.Curve is Line)
{
Line axisCurve = axis.Curve as Line;
XYZ vectorProjOnXY = new XYZ(axisCurve.Direction.X, axisCurve.Direction.Y, 0.0).Normalize(); //Project the vector to XY plane
if (axisCurve.Direction.GetLength() > 0.0 && vectorProjOnXY.GetLength() > 0.0)
{
slope = UnitUtil.ScaleAngle(MathUtil.SafeAcos(axisCurve.Direction.DotProduct(vectorProjOnXY) / (axisCurve.Direction.GetLength() * vectorProjOnXY.GetLength())));
}
if (!double.IsNaN(slope))
{
m_Slope = slope;
return(true);
}
}
}
}
}
// The last attempt to compute the slope angle is to get the slope of the largest top facing face of the geometry
GeometryElement geomElem = element.get_Geometry(GeometryUtil.GetIFCExportGeometryOptions());
Face largestTopFace = null;
if (geomElem == null)
{
return(false);
}
foreach (GeometryObject geomObj in geomElem)
{
largestTopFace = GeometryUtil.GetLargestFaceInSolid(geomObj, new XYZ(0, 0, 1));
}
if (largestTopFace != null)
{
XYZ faceNormal = largestTopFace.ComputeNormal(new UV());
XYZ faceNormalProjXYPlane = new XYZ(faceNormal.X, faceNormal.Y, 0.0).Normalize();
slope = GeometryUtil.GetAngleOfFace(largestTopFace, faceNormalProjXYPlane);
if (!double.IsNaN(slope))
{
m_Slope = slope;
return(true);
}
}
return(false);
}
/// <summary>
/// Get the handles of Grid Axes.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="sameDirectionAxes">The grid axes in the same direction of one level.</param>
/// <param name="representations">The representation of grid axis.</param>
/// <returns>The list of handles of grid axes.</returns>
private static List <IFCAnyHandle> CreateIFCGridAxisAndRepresentations(ExporterIFC exporterIFC, ProductWrapper productWrapper, IList <Grid> sameDirectionAxes,
IList <IFCAnyHandle> representations, GridRepresentationData gridRepresentationData)
{
if (sameDirectionAxes.Count == 0)
{
return(null);
}
IDictionary <ElementId, List <IFCAnyHandle> > gridAxisMap = new Dictionary <ElementId, List <IFCAnyHandle> >();
IDictionary <ElementId, List <IFCAnyHandle> > gridRepMap = new Dictionary <ElementId, List <IFCAnyHandle> >();
IFCFile ifcFile = exporterIFC.GetFile();
Grid baseGrid = sameDirectionAxes[0];
Plane plane = new Plane(XYZ.BasisX, XYZ.BasisY, XYZ.Zero);
List <IFCAnyHandle> ifcGridAxes = new List <IFCAnyHandle>();
foreach (Grid grid in sameDirectionAxes)
{
// Because the IfcGrid is a collection of Revit Grids, any one of them can override the IFC CAD Layer.
// We will take the first name, and not do too much checking.
if (string.IsNullOrWhiteSpace(gridRepresentationData.m_IFCCADLayer))
{
ParameterUtil.GetStringValueFromElementOrSymbol(grid, "IFCCadLayer", out gridRepresentationData.m_IFCCADLayer);
}
// Get the handle of curve.
XYZ projectionDirection = plane.Normal;
IFCGeometryInfo info = IFCGeometryInfo.CreateCurveGeometryInfo(exporterIFC, plane, projectionDirection, false);
ExporterIFCUtils.CollectGeometryInfo(exporterIFC, info, grid.Curve, XYZ.Zero, false);
IList <IFCAnyHandle> curves = info.GetCurves();
if (curves.Count != 1)
{
throw new Exception("IFC: expected 1 curve when export curve element.");
}
IFCAnyHandle axisCurve = curves[0];
bool sameSense = true;
if (baseGrid.Curve is Line)
{
Line baseLine = baseGrid.Curve as Line;
Line axisLine = grid.Curve as Line;
sameSense = (axisLine.Direction.IsAlmostEqualTo(baseLine.Direction));
}
IFCAnyHandle ifcGridAxis = IFCInstanceExporter.CreateGridAxis(ifcFile, grid.Name, axisCurve, sameSense);
ifcGridAxes.Add(ifcGridAxis);
HashSet <IFCAnyHandle> AxisCurves = new HashSet <IFCAnyHandle>();
AxisCurves.Add(axisCurve);
IFCAnyHandle repItemHnd = IFCInstanceExporter.CreateGeometricCurveSet(ifcFile, AxisCurves);
// get the weight and color from the GridType to create the curve style.
GridType gridType = grid.Document.GetElement(grid.GetTypeId()) as GridType;
IFCData curveWidth = null;
if (ExporterCacheManager.ExportOptionsCache.ExportAnnotations)
{
int outWidth;
double width =
(ParameterUtil.GetIntValueFromElement(gridType, BuiltInParameter.GRID_END_SEGMENT_WEIGHT, out outWidth) != null) ? outWidth : 1;
curveWidth = IFCDataUtil.CreateAsPositiveLengthMeasure(width);
}
int outColor;
int color =
(ParameterUtil.GetIntValueFromElement(gridType, BuiltInParameter.GRID_END_SEGMENT_COLOR, out outColor) != null) ? outColor : 0;
double blueVal = 0.0;
double greenVal = 0.0;
double redVal = 0.0;
GeometryUtil.GetRGBFromIntValue(color, out blueVal, out greenVal, out redVal);
IFCAnyHandle colorHnd = IFCInstanceExporter.CreateColourRgb(ifcFile, null, redVal, greenVal, blueVal);
BodyExporter.CreateCurveStyleForRepItem(exporterIFC, repItemHnd, curveWidth, colorHnd);
HashSet <IFCAnyHandle> curveSet = new HashSet <IFCAnyHandle>();
curveSet.Add(repItemHnd);
gridRepresentationData.m_Grids.Add(grid);
gridRepresentationData.m_curveSets.Add(curveSet);
}
return(ifcGridAxes);
}
/// <summary>
/// Exports an element as IFC covering.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element to be exported.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCovering(ExporterIFC exporterIFC, Element element, GeometryElement geomElem, string ifcEnumType, ProductWrapper productWrapper)
{
bool exportParts = PartExporter.CanExportParts(element);
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcCovering;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
ElementType elemType = element.Document.GetElement(element.GetTypeId()) as ElementType;
IFCFile file = exporterIFC.GetFile();
MaterialLayerSetInfo layersetInfo = null;
using (IFCTransaction transaction = new IFCTransaction(file))
{
// For IFC4RV export, Ceiling will be split into its parts(temporarily) in order to export the ceiling by its parts
bool exportByComponents = ExporterUtil.ShouldExportByComponents(element, exportParts);
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
IFCAnyHandle prodRep = null;
if (!exportParts)
{
ecData.SetLocalPlacement(setter.LocalPlacement);
ecData.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (exportByComponents)
{
prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, element, categoryId, geomElem, representations);
}
else
{
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geomElem, bodyExporterOptions, null, ecData, true);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
// We will use the category of the element to set a default value for the covering.
string defaultCoveringEnumType = null;
if (categoryId == new ElementId(BuiltInCategory.OST_Ceilings))
{
defaultCoveringEnumType = "CEILING";
}
else if (categoryId == new ElementId(BuiltInCategory.OST_Floors))
{
defaultCoveringEnumType = "FLOORING";
}
else if (categoryId == new ElementId(BuiltInCategory.OST_Roofs))
{
defaultCoveringEnumType = "ROOFING";
}
string instanceGUID = GUIDUtil.CreateGUID(element);
string coveringType = IFCValidateEntry.GetValidIFCPredefinedTypeType(/*element,*/ ifcEnumType, defaultCoveringEnumType, "IfcCoveringType");
IFCAnyHandle covering = IFCInstanceExporter.CreateCovering(exporterIFC, element, instanceGUID, ExporterCacheManager.OwnerHistoryHandle,
setter.LocalPlacement, prodRep, coveringType);
if (exportParts && !ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
PartExporter.ExportHostPart(exporterIFC, element, covering, productWrapper, setter, setter.LocalPlacement, null);
}
else if (exportByComponents)
{
IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, element, prodRep,
productWrapper, setter, setter.LocalPlacement, ElementId.InvalidElementId, out layersetInfo, ecData);
}
ExporterUtil.AddIntoComplexPropertyCache(covering, layersetInfo);
IFCExportInfoPair exportInfo = new IFCExportInfoPair(IFCEntityType.IfcCovering, IFCEntityType.IfcCoveringType, coveringType);
IFCAnyHandle typeHnd = ExporterUtil.CreateGenericTypeFromElement(element, exportInfo, file, ExporterCacheManager.OwnerHistoryHandle, coveringType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(typeHnd, covering);
bool containInSpace = false;
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
// Ceiling containment in Space is generally required and not specific to any view
if (ExporterCacheManager.CeilingSpaceRelCache.ContainsKey(element.Id))
{
IList <ElementId> roomlist = ExporterCacheManager.CeilingSpaceRelCache[element.Id];
// Process Ceiling to be contained in a Space only when it is exactly bounding one Space
if (roomlist.Count == 1)
{
productWrapper.AddElement(element, covering, setter, ecData, false, exportInfo);
// Modify the Ceiling placement to be relative to the Space that it bounds
IFCAnyHandle roomPlacement = IFCAnyHandleUtil.GetObjectPlacement(ExporterCacheManager.SpaceInfoCache.FindSpaceHandle(roomlist[0]));
Transform relTrf = ExporterIFCUtils.GetRelativeLocalPlacementOffsetTransform(roomPlacement, localPlacementToUse);
Transform inverseTrf = relTrf.Inverse;
IFCAnyHandle relLocalPlacement = ExporterUtil.CreateAxis2Placement3D(file, inverseTrf.Origin, inverseTrf.BasisZ, inverseTrf.BasisX);
IFCAnyHandleUtil.SetAttribute(localPlacementToUse, "PlacementRelTo", roomPlacement);
GeometryUtil.SetRelativePlacement(localPlacementToUse, relLocalPlacement);
ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomlist[0], covering);
containInSpace = true;
}
}
// if not contained in Space, assign it to default containment in Level
if (!containInSpace)
{
productWrapper.AddElement(element, covering, setter, ecData, true, exportInfo);
}
if (!exportParts)
{
Ceiling ceiling = element as Ceiling;
if (ceiling != null)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, ceiling, covering,
geomElem, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, null, null);
}
else
{
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geomElem, exporterIFC, element);
CategoryUtil.CreateMaterialAssociation(exporterIFC, covering, matId);
}
}
OpeningUtil.CreateOpeningsIfNecessary(covering, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
transaction.Commit();
}
}
/// <summary>
/// Exports a roof or floor as a container of multiple roof slabs. Returns the handle, if successful.
/// </summary>
/// <param name="exporterIFC">The exporter.</param>
/// <param name="ifcEnumType">The roof type.</param>
/// <param name="element">The roof or floor element.</param>
/// <param name="geometry">The geometry of the element.</param>
/// <param name="productWrapper">The product wrapper.</param>
/// <returns>The roof handle.</returns>
/// <remarks>For floors, if there is only one component, return null, as we do not want to create a container.</remarks>
public static IFCAnyHandle ExportRoofOrFloorAsContainer(ExporterIFC exporterIFC, string ifcEnumType, Element element, GeometryElement geometry, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
// We support ExtrusionRoofs, FootPrintRoofs, and Floors only.
bool elementIsRoof = (element is ExtrusionRoof) || (element is FootPrintRoof);
bool elementIsFloor = (element is Floor);
if (!elementIsRoof && !elementIsFloor)
{
return(null);
}
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcRoof;
if (elementIsFloor)
{
elementClassTypeEnum = Common.Enums.IFCEntityType.IfcSlab;
}
IFCExportInfoPair roofExportType = new IFCExportInfoPair(elementClassTypeEnum, ifcEnumType);
// Check the intended IFC entity or type name is in the exclude list specified in the UI
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return(null);
}
using (IFCTransaction transaction = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacement = setter.LocalPlacement;
IList <HostObjectSubcomponentInfo> hostObjectSubcomponents = null;
try
{
hostObjectSubcomponents = ExporterIFCUtils.ComputeSubcomponents(element as HostObject);
}
catch
{
return(null);
}
if (hostObjectSubcomponents == null)
{
return(null);
}
int numSubcomponents = hostObjectSubcomponents.Count;
if (numSubcomponents == 0 || (elementIsFloor && numSubcomponents == 1))
{
return(null);
}
IFCAnyHandle hostObjectHandle = null;
try
{
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
extrusionCreationData.SetLocalPlacement(localPlacement);
extrusionCreationData.ReuseLocalPlacement = true;
using (TransformSetter trfSetter = TransformSetter.Create())
{
IList <GeometryObject> geometryList = new List <GeometryObject>();
geometryList.Add(geometry);
trfSetter.InitializeFromBoundingBox(exporterIFC, geometryList, extrusionCreationData);
IFCAnyHandle prodRepHnd = null;
string elementGUID = GUIDUtil.CreateGUID(element);
//string hostObjectType = IFCValidateEntry.GetValidIFCPredefinedType(element, ifcEnumType);
if (elementIsRoof)
{
hostObjectHandle = IFCInstanceExporter.CreateRoof(exporterIFC, element, elementGUID, ownerHistory,
localPlacement, prodRepHnd, ifcEnumType);
}
else
{
hostObjectHandle = IFCInstanceExporter.CreateSlab(exporterIFC, element, elementGUID, ownerHistory,
localPlacement, prodRepHnd, ifcEnumType);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(hostObjectHandle))
{
return(null);
}
IList <IFCAnyHandle> elementHandles = new List <IFCAnyHandle>();
elementHandles.Add(hostObjectHandle);
// If element is floor, then the profile curve loop of hostObjectSubComponent is computed from the top face of the floor
// else if element is roof, then the profile curve loop is taken from the bottom face of the roof instead
XYZ extrusionDir = elementIsFloor ? new XYZ(0, 0, -1) : new XYZ(0, 0, 1);
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
IList <IFCAnyHandle> slabHandles = new List <IFCAnyHandle>();
IList <CurveLoop> hostObjectOpeningLoops = new List <CurveLoop>();
double maximumScaledDepth = 0.0;
using (IFCExtrusionCreationData slabExtrusionCreationData = new IFCExtrusionCreationData())
{
slabExtrusionCreationData.SetLocalPlacement(extrusionCreationData.GetLocalPlacement());
slabExtrusionCreationData.ReuseLocalPlacement = false;
slabExtrusionCreationData.ForceOffset = true;
int loopNum = 0;
int subElementStart = elementIsRoof ? (int)IFCRoofSubElements.RoofSlabStart : (int)IFCSlabSubElements.SubSlabStart;
string subSlabType = elementIsRoof ? "ROOF" : ifcEnumType;
foreach (HostObjectSubcomponentInfo hostObjectSubcomponent in hostObjectSubcomponents)
{
trfSetter.InitializeFromBoundingBox(exporterIFC, geometryList, slabExtrusionCreationData);
Plane plane = hostObjectSubcomponent.GetPlane();
Transform lcs = GeometryUtil.CreateTransformFromPlane(plane);
IList <CurveLoop> curveLoops = new List <CurveLoop>();
CurveLoop slabCurveLoop = hostObjectSubcomponent.GetCurveLoop();
curveLoops.Add(slabCurveLoop);
double slope = Math.Abs(plane.Normal.Z);
double scaledDepth = UnitUtil.ScaleLength(hostObjectSubcomponent.Depth);
double scaledExtrusionDepth = scaledDepth * slope;
IFCAnyHandle shapeRep = ExtrusionExporter.CreateExtrudedSolidFromCurveLoop(exporterIFC, null, curveLoops, lcs, extrusionDir, scaledExtrusionDepth, false);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(shapeRep))
{
productWrapper.ClearInternalHandleWrapperData(element);
return(null);
}
ElementId matId = HostObjectExporter.GetFirstLayerMaterialId(element as HostObject);
BodyExporter.CreateSurfaceStyleForRepItem(exporterIFC, element.Document, shapeRep, matId);
HashSet <IFCAnyHandle> bodyItems = new HashSet <IFCAnyHandle>();
bodyItems.Add(shapeRep);
shapeRep = RepresentationUtil.CreateSweptSolidRep(exporterIFC, element, catId, exporterIFC.Get3DContextHandle("Body"), bodyItems, null);
IList <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>();
shapeReps.Add(shapeRep);
IFCAnyHandle repHnd = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps);
// Allow support for up to 256 named IfcSlab components, as defined in IFCSubElementEnums.cs.
string slabGUID = (loopNum < 256) ? GUIDUtil.CreateSubElementGUID(element, subElementStart + loopNum) : GUIDUtil.CreateGUID();
IFCAnyHandle slabPlacement = ExporterUtil.CreateLocalPlacement(file, slabExtrusionCreationData.GetLocalPlacement(), null);
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(exporterIFC, element, slabGUID, ownerHistory,
slabPlacement, repHnd, subSlabType);
IFCExportInfoPair exportType = new IFCExportInfoPair(IFCEntityType.IfcSlab, subSlabType);
//slab quantities
slabExtrusionCreationData.ScaledLength = scaledExtrusionDepth;
slabExtrusionCreationData.ScaledArea = UnitUtil.ScaleArea(UnitUtil.ScaleArea(hostObjectSubcomponent.AreaOfCurveLoop));
slabExtrusionCreationData.ScaledOuterPerimeter = UnitUtil.ScaleLength(curveLoops[0].GetExactLength());
slabExtrusionCreationData.Slope = UnitUtil.ScaleAngle(MathUtil.SafeAcos(Math.Abs(slope)));
ExporterUtil.RelateObject(exporterIFC, hostObjectHandle, slabHnd);
IFCExportInfoPair slabRoofExportType = new IFCExportInfoPair(IFCEntityType.IfcSlab, slabRoofPredefinedType);
productWrapper.AddElement(null, slabHnd, setter, slabExtrusionCreationData, false, slabRoofExportType);
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, matId);
// Create type
IFCAnyHandle slabRoofTypeHnd = ExporterUtil.CreateGenericTypeFromElement(element, slabRoofExportType, exporterIFC.GetFile(), ownerHistory, slabRoofPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(slabRoofTypeHnd, slabHnd);
elementHandles.Add(slabHnd);
slabHandles.Add(slabHnd);
hostObjectOpeningLoops.Add(slabCurveLoop);
maximumScaledDepth = Math.Max(maximumScaledDepth, scaledDepth);
loopNum++;
}
}
productWrapper.AddElement(element, hostObjectHandle, setter, extrusionCreationData, true, roofExportType);
ExporterUtil.RelateObjects(exporterIFC, null, hostObjectHandle, slabHandles);
OpeningUtil.AddOpeningsToElement(exporterIFC, elementHandles, hostObjectOpeningLoops, element, null, maximumScaledDepth,
null, setter, localPlacement, productWrapper);
transaction.Commit();
return(hostObjectHandle);
}
}
}
catch
{
// SOmething wrong with the above process, unable to create the extrusion data. Reset any internal handles that may have been partially created since they are not committed
productWrapper.ClearInternalHandleWrapperData(element);
return(null);
}
finally
{
exporterIFC.ClearFaceWithElementHandleMap();
}
}
}
}
public void Execute()
{
this._result = ParameterUtil.GetFilterWithTag(this.Query.Execute(), this.TagName);
}
/// <summary>
/// Exports a beam to IFC beam if it has an axis representation and only one Solid as its geometry, ideally as an extrusion, potentially with clippings and openings.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element to be exported.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <param name="dontExport">An output value that says that the element shouldn't be exported at all.</param>
/// <returns>The created handle.</returns>
/// <remarks>In the original implementation, the ExportBeam function would export each beam as its own individual geometry (that is, not use representation maps).
/// For non-standard beams, this could result in massive IFC files. Now, we use the ExportBeamAsStandardElement function and limit its scope, and instead
/// resort to the standard FamilyInstanceExporter.ExportFamilyInstanceAsMappedItem for more complicated objects categorized as beams. This has the following pros and cons:
/// Pro: possiblity for massively reduced file sizes for files containing repeated complex beam families
/// Con: some beams that may have had an "Axis" representation before will no longer have them, although this possibility is minimized.
/// Con: some beams that have 1 Solid and an axis, but that Solid will be heavily faceted, won't be helped by this improvement.
/// It is intended that we phase out this routine entirely and instead teach ExportFamilyInstanceAsMappedItem how to sometimes export the Axis representation for beams.</remarks>
public static IFCAnyHandle ExportBeamAsStandardElement(ExporterIFC exporterIFC,
Element element, IFCExportInfoPair exportType, GeometryElement geometryElement, ProductWrapper productWrapper, out bool dontExport)
{
dontExport = true;
IList <GeometryObject> geomObjects = BeamGeometryToExport(exporterIFC, element, geometryElement, out dontExport);
if (dontExport)
{
return(null);
}
IFCAnyHandle beam = null;
IFCFile file = exporterIFC.GetFile();
MaterialAndProfile materialAndProfile = null;
IFCAnyHandle materialProfileSet = null;
using (IFCTransaction transaction = new IFCTransaction(file))
{
BeamAxisInfo axisInfo = GetBeamAxisTransform(element);
bool canExportAxis = (axisInfo != null);
Curve curve = canExportAxis ? axisInfo.Axis : null;
XYZ beamDirection = canExportAxis ? axisInfo.AxisDirection : null;
Transform orientTrf = canExportAxis ? axisInfo.LCSAsTransform : null;
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, orientTrf, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacement = setter.LocalPlacement;
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(localPlacement);
if (canExportAxis && (orientTrf.BasisX != null))
{
extrusionCreationData.CustomAxis = beamDirection;
extrusionCreationData.PossibleExtrusionAxes = IFCExtrusionAxes.TryCustom;
}
else
{
extrusionCreationData.PossibleExtrusionAxes = IFCExtrusionAxes.TryXY;
}
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
// There may be an offset to make the local coordinate system
// be near the origin. This offset will be used to move the axis to the new LCS.
Transform offsetTransform = null;
// The list of materials in the solids or meshes.
ICollection <ElementId> materialIds = null;
// If the beam is a FamilyInstance, and it uses transformed FamilySymbol geometry only, then
// let's only try to CreateBeamGeometryAsExtrusion unsuccesfully once. Otherwise, we can spend a lot of time trying
// unsuccessfully to do so.
bool tryToCreateBeamGeometryAsExtrusion = true;
//bool useFamilySymbolGeometry = (element is FamilyInstance) ? !ExporterIFCUtils.UsesInstanceGeometry(element as FamilyInstance) : false;
bool useFamilySymbolGeometry = (element is FamilyInstance) ? !GeometryUtil.UsesInstanceGeometry(element as FamilyInstance) : false;
ElementId beamTypeId = element.GetTypeId();
if (useFamilySymbolGeometry)
{
tryToCreateBeamGeometryAsExtrusion = !ExporterCacheManager.CanExportBeamGeometryAsExtrusionCache.ContainsKey(beamTypeId) ||
ExporterCacheManager.CanExportBeamGeometryAsExtrusionCache[beamTypeId];
}
// The representation handle generated from one of the methods below.
BeamBodyAsExtrusionInfo extrusionInfo = null;
if (tryToCreateBeamGeometryAsExtrusion)
{
extrusionInfo = CreateBeamGeometryAsExtrusion(exporterIFC, element, catId, geomObjects, axisInfo);
if (useFamilySymbolGeometry)
{
ExporterCacheManager.CanExportBeamGeometryAsExtrusionCache[beamTypeId] = (extrusionInfo != null);
}
}
if (extrusionInfo != null && extrusionInfo.DontExport)
{
dontExport = true;
return(null);
}
IFCAnyHandle repHnd = (extrusionInfo != null) ? extrusionInfo.RepresentationHandle : null;
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(repHnd))
{
materialIds = extrusionInfo.Materials;
extrusionCreationData.Slope = extrusionInfo.Slope;
}
else
{
// Here is where we limit the scope of how complex a case we will still try to export as a standard element.
// This is explicitly added so that many curved beams that can be represented by a reasonable facetation because of the
// SweptSolidExporter can still have an Axis representation.
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
bodyExporterOptions.CollectMaterialAndProfile = false;
}
else
{
bodyExporterOptions.CollectMaterialAndProfile = true;
}
if (geomObjects != null && geomObjects.Count == 1 && geomObjects[0] is Solid)
{
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId, ElementId.InvalidElementId,
geomObjects[0], bodyExporterOptions, extrusionCreationData);
repHnd = bodyData.RepresentationHnd;
materialIds = bodyData.MaterialIds;
if (!bodyData.OffsetTransform.IsIdentity)
{
offsetTransform = bodyData.OffsetTransform;
}
materialAndProfile = bodyData.MaterialAndProfile;
}
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(repHnd))
{
extrusionCreationData.ClearOpenings();
return(null);
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
IFCAnyHandle axisRep = CreateBeamAxis(exporterIFC, element, catId, axisInfo, offsetTransform);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(axisRep))
{
representations.Add(axisRep);
}
representations.Add(repHnd);
Transform boundingBoxTrf = (offsetTransform == null) ? Transform.Identity : offsetTransform.Inverse;
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, boundingBoxTrf);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
string instanceGUID = GUIDUtil.CreateGUID(element);
beam = IFCInstanceExporter.CreateBeam(exporterIFC, element, instanceGUID, ExporterCacheManager.OwnerHistoryHandle, extrusionCreationData.GetLocalPlacement(), prodRep, exportType.ValidatedPredefinedType);
IFCAnyHandle mpSetUsage;
if (materialProfileSet != null)
{
mpSetUsage = IFCInstanceExporter.CreateMaterialProfileSetUsage(file, materialProfileSet, null, null);
}
productWrapper.AddElement(element, beam, setter, extrusionCreationData, true, exportType);
ExportBeamType(exporterIFC, productWrapper, beam, element, exportType.ValidatedPredefinedType);
OpeningUtil.CreateOpeningsIfNecessary(beam, element, extrusionCreationData, offsetTransform, exporterIFC,
extrusionCreationData.GetLocalPlacement(), setter, productWrapper);
FamilyTypeInfo typeInfo = new FamilyTypeInfo();
typeInfo.ScaledDepth = extrusionCreationData.ScaledLength;
typeInfo.ScaledArea = extrusionCreationData.ScaledArea;
typeInfo.ScaledInnerPerimeter = extrusionCreationData.ScaledInnerPerimeter;
typeInfo.ScaledOuterPerimeter = extrusionCreationData.ScaledOuterPerimeter;
PropertyUtil.CreateBeamColumnBaseQuantities(exporterIFC, beam, element, typeInfo, null);
if (materialIds.Count != 0)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, beam, materialIds);
}
// Register the beam's IFC handle for later use by truss and beam system export.
ExporterCacheManager.ElementToHandleCache.Register(element.Id, beam, exportType);
}
}
transaction.Commit();
return(beam);
}
}
/// <summary>
/// Exports curtain object as container.
/// </summary>
/// <param name="allSubElements">
/// Collection of elements contained in the host curtain element.
/// </param>
/// <param name="wallElement">
/// The curtain wall element.
/// </param>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportCurtainObjectCommonAsContainer(ICollection <ElementId> allSubElements, Element wallElement,
ExporterIFC exporterIFC, ProductWrapper origWrapper, PlacementSetter currSetter)
{
if (wallElement == null)
{
return;
}
string overrideCADLayer = null;
if (ParameterUtil.GetStringValueFromElementOrSymbol(wallElement, "IFCCadLayer", out overrideCADLayer) == null ||
string.IsNullOrWhiteSpace(overrideCADLayer))
{
if ((ParameterUtil.GetStringValueFromElementOrSymbol(wallElement, "IfcPresentationLayer", out overrideCADLayer) == null) ||
string.IsNullOrWhiteSpace(overrideCADLayer))
{
overrideCADLayer = ExporterStateManager.GetCurrentCADLayerOverride();
}
}
using (ExporterStateManager.CADLayerOverrideSetter layerSetter = new ExporterStateManager.CADLayerOverrideSetter(overrideCADLayer))
{
HashSet <ElementId> alreadyVisited = new HashSet <ElementId>(); // just in case.
Options geomOptions = GeometryUtil.GetIFCExportGeometryOptions();
{
foreach (ElementId subElemId in allSubElements)
{
using (ProductWrapper productWrapper = ProductWrapper.Create(origWrapper))
{
Element subElem = wallElement.Document.GetElement(subElemId);
if (subElem == null)
{
continue;
}
if (alreadyVisited.Contains(subElem.Id))
{
continue;
}
alreadyVisited.Add(subElem.Id);
// Respect element visibility settings.
if (!ElementFilteringUtil.CanExportElement(exporterIFC, subElem, false) || !ElementFilteringUtil.IsElementVisible(subElem))
{
continue;
}
GeometryElement geomElem = subElem.get_Geometry(geomOptions);
if (geomElem == null)
{
continue;
}
try
{
if (subElem is FamilyInstance)
{
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, subElem, out ifcEnumType);
if (subElem is Mullion)
{
if (ExporterCacheManager.ExportOptionsCache.ExportAs2x2)
{
ProxyElementExporter.Export(exporterIFC, subElem, geomElem, productWrapper, exportType);
}
else
{
IFCAnyHandle currLocalPlacement = currSetter.LocalPlacement;
if (exportType.ExportInstance == IFCEntityType.IfcCurtainWall)
{
// By default, panels and mullions are set to the same category as their parent. In this case,
// ask to get the exportType from the category id, since we don't want to inherit the parent class.
ifcEnumType = "MULLION";
exportType.SetValueWithPair(IFCEntityType.IfcMemberType, ifcEnumType);
}
FamilyInstanceExporter.ExportFamilyInstanceAsMappedItem(exporterIFC, subElem as Mullion, exportType, exportType.ValidatedPredefinedType, productWrapper,
ElementId.InvalidElementId, null, currLocalPlacement);
}
}
else
{
FamilyInstance subFamInst = subElem as FamilyInstance;
if (exportType.ExportInstance == IFCEntityType.IfcCurtainWall)
{
// By default, panels and mullions are set to the same category as their parent. In this case,
// ask to get the exportType from the category id, since we don't want to inherit the parent class.
ElementId catId = CategoryUtil.GetSafeCategoryId(subElem);
exportType = ElementFilteringUtil.GetExportTypeFromCategoryId(catId, out ifcEnumType);
}
if (ExporterCacheManager.ExportOptionsCache.ExportAs2x2)
{
if ((exportType.ExportInstance == IFCEntityType.UnKnown) ||
(exportType.ExportInstance == IFCEntityType.IfcPlate) ||
(exportType.ExportInstance == IFCEntityType.IfcMember))
{
exportType.SetValueWithPair(IFCEntityType.IfcBuildingElementProxy, ifcEnumType);
}
}
else
{
if (exportType.ExportInstance == IFCEntityType.UnKnown)
{
ifcEnumType = "CURTAIN_PANEL";
exportType.SetValueWithPair(IFCEntityType.IfcPlateType, ifcEnumType);
}
}
IFCAnyHandle currLocalPlacement = currSetter.LocalPlacement;
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
FamilyInstanceExporter.ExportFamilyInstanceAsMappedItem(exporterIFC, subFamInst, exportType, ifcEnumType, productWrapper,
ElementId.InvalidElementId, null, currLocalPlacement);
}
}
}
else if (subElem is CurtainGridLine)
{
ProxyElementExporter.Export(exporterIFC, subElem, geomElem, productWrapper);
}
else if (subElem is Wall)
{
WallExporter.ExportWall(exporterIFC, null, subElem, null, geomElem, productWrapper);
}
}
catch (Exception ex)
{
if (ExporterUtil.IsFatalException(wallElement.Document, ex))
{
throw ex;
}
continue;
}
}
}
}
}
}
/// <summary>
/// Exports an element as an IFC assembly.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if exported successfully, false otherwise.</returns>
public static bool ExportAssemblyInstanceElement(ExporterIFC exporterIFC, AssemblyInstance element,
ProductWrapper productWrapper)
{
if (element == null)
{
return(false);
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
IFCAnyHandle assemblyInstanceHnd = null;
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = null;
PlacementSetter placementSetter = null;
IFCLevelInfo levelInfo = null;
bool relateToLevel = true;
string ifcEnumType;
IFCExportInfoPair exportAs = ExporterUtil.GetObjectExportType(exporterIFC, element, out ifcEnumType);
if (exportAs.ExportInstance == IFCEntityType.IfcSystem)
{
string name = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element));
string description = NamingUtil.GetDescriptionOverride(element, null);
string objectType = NamingUtil.GetObjectTypeOverride(element, NamingUtil.GetFamilyAndTypeName(element));
assemblyInstanceHnd = IFCInstanceExporter.CreateSystem(file, guid, ownerHistory, name, description, objectType);
// Create classification reference when System has classification filed name assigned to it
ClassificationUtil.CreateClassification(exporterIFC, file, element, assemblyInstanceHnd);
HashSet <IFCAnyHandle> relatedBuildings =
new HashSet <IFCAnyHandle>()
{
ExporterCacheManager.BuildingHandle
};
string relServicesBuildingsGuid = GUIDUtil.GenerateIFCGuidFrom(IFCEntityType.IfcRelServicesBuildings,
assemblyInstanceHnd);
IFCAnyHandle relServicesBuildings = IFCInstanceExporter.CreateRelServicesBuildings(file,
relServicesBuildingsGuid, ExporterCacheManager.OwnerHistoryHandle, null, null,
assemblyInstanceHnd, relatedBuildings);
relateToLevel = false; // Already related to the building via IfcRelServicesBuildings.
}
else
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (placementSetter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle representation = null;
// We have limited support for exporting assemblies as other container types.
localPlacement = placementSetter.LocalPlacement;
levelInfo = placementSetter.LevelInfo;
switch (exportAs.ExportInstance)
{
case IFCEntityType.IfcCurtainWall:
assemblyInstanceHnd = IFCInstanceExporter.CreateCurtainWall(exporterIFC, element, guid,
ownerHistory, localPlacement, representation, ifcEnumType);
break;
case IFCEntityType.IfcRamp:
string rampPredefinedType = RampExporter.GetIFCRampType(ifcEnumType);
assemblyInstanceHnd = IFCInstanceExporter.CreateRamp(exporterIFC, element, guid,
ownerHistory, localPlacement, representation, rampPredefinedType);
break;
case IFCEntityType.IfcRoof:
assemblyInstanceHnd = IFCInstanceExporter.CreateRoof(exporterIFC, element, guid,
ownerHistory, localPlacement, representation, ifcEnumType);
break;
case IFCEntityType.IfcStair:
string stairPredefinedType = StairsExporter.GetIFCStairType(ifcEnumType);
assemblyInstanceHnd = IFCInstanceExporter.CreateStair(exporterIFC, element, guid,
ownerHistory, localPlacement, representation, stairPredefinedType);
break;
case IFCEntityType.IfcWall:
assemblyInstanceHnd = IFCInstanceExporter.CreateWall(exporterIFC, element, guid,
ownerHistory, localPlacement, representation, ifcEnumType);
break;
default:
string objectType = NamingUtil.GetObjectTypeOverride(element, NamingUtil.GetFamilyAndTypeName(element));
IFCElementAssemblyType assemblyPredefinedType = GetPredefinedTypeFromObjectType(objectType);
assemblyInstanceHnd = IFCInstanceExporter.CreateElementAssembly(exporterIFC, element, guid,
ownerHistory, localPlacement, representation, IFCAssemblyPlace.NotDefined, assemblyPredefinedType);
break;
}
}
}
if (assemblyInstanceHnd == null)
{
return(false);
}
// relateToLevel depends on how the AssemblyInstance is being mapped to IFC, above.
productWrapper.AddElement(element, assemblyInstanceHnd, levelInfo, null, relateToLevel, exportAs);
ExporterCacheManager.AssemblyInstanceCache.RegisterAssemblyInstance(element.Id, assemblyInstanceHnd);
tr.Commit();
return(true);
}
}
/// <summary>
/// Export the individual part (IfcBuildingElementPart).
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The part element to export.</param>
/// <param name="geometryElement">The geometry of part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
/// <param name="placementSetter"></param>
/// <param name="originalPlacement"></param>
/// <param name="range"></param>
/// <param name="ifcExtrusionAxes"></param>
/// <param name="hostElement">The host of the part. This can be null.</param>
/// <param name="overrideLevelId">The id of the level that the part is one, overridding other sources.</param>
/// <param name="asBuildingElement">If true, export the Part as a building element instead of an IfcElementPart.</param>
public static void ExportPart(ExporterIFC exporterIFC, Element partElement, ProductWrapper productWrapper,
PlacementSetter placementSetter, IFCAnyHandle originalPlacement, IFCRange range, IFCExtrusionAxes ifcExtrusionAxes,
Element hostElement, ElementId overrideLevelId, bool asBuildingElement)
{
if (!ElementFilteringUtil.IsElementVisible(partElement))
{
return;
}
Part part = partElement as Part;
if (part == null)
{
return;
}
// We don't know how to export a part as a building element if we don't know it's host.
if (asBuildingElement && (hostElement == null))
{
return;
}
if (!asBuildingElement)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcBuildingElementPart;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
else
{
string ifcEnumType = null;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
}
PlacementSetter standalonePlacementSetter = null;
bool standaloneExport = hostElement == null || asBuildingElement;
ElementId partExportLevelId = (overrideLevelId != null) ? overrideLevelId : null;
if (partExportLevelId == null && standaloneExport)
{
partExportLevelId = partElement.LevelId;
}
if (partExportLevelId == null)
{
if (hostElement == null || (part.OriginalCategoryId != hostElement.Category.Id))
{
return;
}
partExportLevelId = hostElement.LevelId;
}
if (ExporterCacheManager.PartExportedCache.HasExported(partElement.Id, partExportLevelId))
{
return;
}
Options options = GeometryUtil.GetIFCExportGeometryOptions();
View ownerView = partElement.Document.GetElement(partElement.OwnerViewId) as View;
if (ownerView != null)
{
options.View = ownerView;
}
GeometryElement geometryElement = partElement.get_Geometry(options);
if (geometryElement == null)
{
return;
}
try
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IFCAnyHandle partPlacement = null;
if (standaloneExport)
{
Transform orientationTrf = Transform.Identity;
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, partElement, out overrideContainerHnd);
if (overrideContainerId != ElementId.InvalidElementId && (partExportLevelId == null || partExportLevelId == ElementId.InvalidElementId))
{
partExportLevelId = overrideContainerId;
}
standalonePlacementSetter = PlacementSetter.Create(exporterIFC, partElement, null, orientationTrf, partExportLevelId, overrideContainerHnd);
partPlacement = standalonePlacementSetter.LocalPlacement;
}
else
{
//partPlacement = ExporterUtil.CreateLocalPlacement(file, null, null);
partPlacement = ExporterUtil.CreateLocalPlacement(file, originalPlacement, null);
}
bool validRange = (range != null && !MathUtil.IsAlmostZero(range.Start - range.End));
SolidMeshGeometryInfo solidMeshInfo;
if (validRange)
{
solidMeshInfo = GeometryUtil.GetSplitClippedSolidMeshGeometry(geometryElement, range);
if (solidMeshInfo.GetSolids().Count == 0 && solidMeshInfo.GetMeshes().Count == 0)
{
return;
}
}
else
{
solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
}
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(partPlacement);
extrusionCreationData.ReuseLocalPlacement = false;
extrusionCreationData.PossibleExtrusionAxes = ifcExtrusionAxes;
IList <Solid> solids = new List <Solid>();;
IList <Mesh> meshes = new List <Mesh>();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(partElement.Document, exporterIFC, solidMeshInfo.GetSolids(), solidMeshInfo.GetMeshes());
foreach (GeometryObject gObj in gObjs)
{
if (gObj is Solid)
{
solids.Add(gObj as Solid);
}
else if (gObj is Mesh)
{
meshes.Add(gObj as Mesh);
}
}
ElementId catId = CategoryUtil.GetSafeCategoryId(partElement);
ElementId hostCatId = CategoryUtil.GetSafeCategoryId(hostElement);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, solids, meshes,
bodyExporterOptions, extrusionCreationData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, geomlist,
bodyExporterOptions, extrusionCreationData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
extrusionCreationData.ClearOpenings();
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string partGUID = GUIDUtil.CreateGUID(partElement);
string ifcEnumType = null;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
IFCAnyHandle ifcPart = null;
if (!asBuildingElement)
{
ifcPart = IFCInstanceExporter.CreateBuildingElementPart(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep);
}
else
{
switch (exportType.ExportInstance)
{
case IFCEntityType.IfcColumn:
ifcPart = IFCInstanceExporter.CreateColumn(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcCovering:
ifcPart = IFCInstanceExporter.CreateCovering(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcFooting:
ifcPart = IFCInstanceExporter.CreateFooting(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcPile:
ifcPart = IFCInstanceExporter.CreatePile(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType, null);
break;
case IFCEntityType.IfcRoof:
ifcPart = IFCInstanceExporter.CreateRoof(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcSlab:
{
// TODO: fix this elsewhere.
if (ExporterUtil.IsNotDefined(ifcEnumType))
{
if (hostCatId == new ElementId(BuiltInCategory.OST_Floors))
{
ifcEnumType = "FLOOR";
}
else if (hostCatId == new ElementId(BuiltInCategory.OST_Roofs))
{
ifcEnumType = "ROOF";
}
}
ifcPart = IFCInstanceExporter.CreateSlab(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
}
break;
case IFCEntityType.IfcWall:
ifcPart = IFCInstanceExporter.CreateWall(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
default:
ifcPart = IFCInstanceExporter.CreateBuildingElementProxy(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, exportType.ValidatedPredefinedType);
break;
}
}
bool containedInLevel = standaloneExport;
PlacementSetter whichPlacementSetter = containedInLevel ? standalonePlacementSetter : placementSetter;
productWrapper.AddElement(partElement, ifcPart, whichPlacementSetter, extrusionCreationData, containedInLevel, exportType);
OpeningUtil.CreateOpeningsIfNecessary(ifcPart, partElement, extrusionCreationData, bodyData.OffsetTransform, exporterIFC,
extrusionCreationData.GetLocalPlacement(), whichPlacementSetter, productWrapper);
//Add the exported part to exported cache.
TraceExportedParts(partElement, partExportLevelId, standaloneExport ? ElementId.InvalidElementId : hostElement.Id);
CategoryUtil.CreateMaterialAssociation(exporterIFC, ifcPart, bodyData.MaterialIds);
transaction.Commit();
}
}
}
finally
{
if (standalonePlacementSetter != null)
{
standalonePlacementSetter.Dispose();
}
}
}
/// <summary>
/// Creates IfcPresentationStyleAssignment for text element type.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="textElemType">
/// The text note element type.
/// </param>
/// <param name="cache">
/// The cache of IfcPresentationStyleAssignment.
/// </param>
static void CreatePresentationStyleAssignmentForTextElementType(ExporterIFC exporterIFC, TextElementType textElemType, PresentationStyleAssignmentCache cache)
{
IFCFile file = exporterIFC.GetFile();
string fontName;
if (ParameterUtil.GetStringValueFromElement(textElemType, BuiltInParameter.TEXT_FONT, out fontName) == null)
{
fontName = null;
}
double fontSize;
if (ParameterUtil.GetDoubleValueFromElement(textElemType, BuiltInParameter.TEXT_SIZE, out fontSize) == null)
{
fontSize = -1.0;
}
double viewScale = 100.0; // currently hardwired.
fontSize = UnitUtil.ScaleLength(fontSize * viewScale);
string ifcPreDefinedItemName = "Text Font";
IList <string> fontNameList = new List <string>();
fontNameList.Add(fontName);
IFCAnyHandle textSyleFontModelHnd = IFCInstanceExporter.CreateTextStyleFontModel(file, ifcPreDefinedItemName, fontNameList, null, null, null, IFCDataUtil.CreateAsPositiveLengthMeasure(fontSize));
int color;
ParameterUtil.GetIntValueFromElement(textElemType, BuiltInParameter.LINE_COLOR, out color);
double blueVal = ((double)((color & 0xff0000) >> 16)) / 255.0;
double greenVal = ((double)((color & 0xff00) >> 8)) / 255.0;
double redVal = ((double)(color & 0xff)) / 255.0;
IFCAnyHandle colorHnd = IFCInstanceExporter.CreateColourRgb(file, null, redVal, greenVal, blueVal);
IFCAnyHandle fontColorHnd = IFCInstanceExporter.CreateTextStyleForDefinedFont(file, colorHnd, null);
string ifcAttrName = textElemType.Name;
IFCAnyHandle textStyleHnd = IFCInstanceExporter.CreateTextStyle(file, textElemType.Name, fontColorHnd, null, textSyleFontModelHnd);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(textStyleHnd))
{
return;
}
HashSet <IFCAnyHandle> presStyleSet = new HashSet <IFCAnyHandle>();
presStyleSet.Add(textStyleHnd);
IFCAnyHandle presStyleHnd = IFCInstanceExporter.CreatePresentationStyleAssignment(file, presStyleSet);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(presStyleHnd))
{
return;
}
cache.Register(textElemType.Id, presStyleHnd);
}
/// <summary>
/// Exports a generic element as an IfcSlab.</summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="ifcEnumType">The string value represents the IFC type.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if the floor is exported successfully, false otherwise.</returns>
public static void ExportGenericSlab(ExporterIFC exporterIFC, Element slabElement, GeometryElement geometryElement, string ifcEnumType,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, slabElement, out overrideContainerHnd);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, slabElement, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
bool exportParts = PartExporter.CanExportParts(slabElement);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
IFCAnyHandle prodDefHnd = null;
bool isBRepSlabHnd = false;
if (!exportParts)
{
ecData.SetLocalPlacement(localPlacement);
ElementId catId = CategoryUtil.GetSafeCategoryId(slabElement);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
slabElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
isBRepSlabHnd = (bodyData.ShapeRepresentationType == ShapeRepresentationType.Brep || bodyData.ShapeRepresentationType == ShapeRepresentationType.Tessellation);
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(slabElement);
string entityType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(slabElement, ifcEnumType, "FLOOR");
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(exporterIFC, slabElement, ifcGUID, ownerHistory,
localPlacement, exportParts ? null : prodDefHnd, entityType);
IFCExportInfoPair exportInfo = new IFCExportInfoPair(IFCEntityType.IfcSlab, entityType);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, slabElement, slabHnd, productWrapper, placementSetter, localPlacement, null);
}
productWrapper.AddElement(slabElement, slabHnd, placementSetter, ecData, true, exportInfo);
if (!exportParts)
{
IFCAnyHandle typeHnd = ExporterUtil.CreateGenericTypeFromElement(slabElement, exportInfo, file, ownerHistory, entityType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(typeHnd, slabHnd);
if (slabElement is HostObject)
{
HostObject hostObject = slabElement as HostObject;
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, hostObject, slabHnd,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, isBRepSlabHnd, typeHnd);
}
else if (slabElement is FamilyInstance)
{
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, slabElement);
//Document doc = slabElement.Document;
if (typeHnd != null)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, typeHnd, matId);
}
else
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, matId);
}
}
OpeningUtil.CreateOpeningsIfNecessary(slabHnd, slabElement, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), placementSetter, productWrapper);
}
}
}
tr.Commit();
return;
}
}
}
/// <summary>
/// Exports a curve element to IFC curve annotation.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="curveElement">
/// The curve element to be exported.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportCurveElement(ExporterIFC exporterIFC, CurveElement curveElement, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null || !ShouldCurveElementBeExported(curveElement))
{
return;
}
SketchPlane sketchPlane = curveElement.SketchPlane;
if (sketchPlane == null)
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcAnnotation;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, curveElement, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, curveElement, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacement = setter.LocalPlacement;
IFCAnyHandle axisPlacement = GeometryUtil.GetRelativePlacementFromLocalPlacement(localPlacement);
Plane planeSK = sketchPlane.GetPlane();
XYZ projDir = planeSK.Normal;
XYZ origin = planeSK.Origin;
bool useOffsetTrf = false;
if (projDir.IsAlmostEqualTo(XYZ.BasisZ))
{
XYZ offset = XYZ.BasisZ * setter.Offset;
origin -= offset;
}
else
{
useOffsetTrf = true;
}
Transform curveLCS = GeometryUtil.CreateTransformFromPlane(planeSK);
curveLCS.Origin = origin;
IList <IFCAnyHandle> curves = null;
if (ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
Transform trf = null;
if (useOffsetTrf)
{
XYZ offsetOrig = -XYZ.BasisZ * setter.Offset;
trf = Transform.CreateTranslation(offsetOrig);
}
curves = new List <IFCAnyHandle>();
//Curve curve = (geometryElement as GeometryObject) as Curve;
List <Curve> curvesFromGeomElem = GeometryUtil.GetCurvesFromGeometryElement(geometryElement);
foreach (Curve curve in curvesFromGeomElem)
{
IFCAnyHandle curveHnd;
try
{
curveHnd = GeometryUtil.CreatePolyCurveFromCurve(exporterIFC, curve, trf);
}
catch
{
curveHnd = GeometryUtil.OutdatedCreatePolyCurveFromCurve(exporterIFC, curve, trf);
}
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(curveHnd))
{
curves.Add(curveHnd);
}
}
}
else
{
IFCGeometryInfo info = IFCGeometryInfo.CreateCurveGeometryInfo(exporterIFC, curveLCS, projDir, false);
if (useOffsetTrf)
{
XYZ offsetOrig = -XYZ.BasisZ * setter.Offset;
Transform trf = Transform.CreateTranslation(offsetOrig);
ExporterIFCUtils.CollectGeometryInfo(exporterIFC, info, geometryElement, XYZ.Zero, false, trf);
}
else
{
ExporterIFCUtils.CollectGeometryInfo(exporterIFC, info, geometryElement, XYZ.Zero, false);
}
curves = info.GetCurves();
}
if (curves.Count != 1)
{
throw new Exception("IFC: expected 1 curve when export curve element.");
}
HashSet <IFCAnyHandle> curveSet = new HashSet <IFCAnyHandle>(curves);
IFCAnyHandle repItemHnd = IFCInstanceExporter.CreateGeometricCurveSet(file, curveSet);
IFCAnyHandle curveStyle = file.CreateStyle(exporterIFC, repItemHnd);
CurveAnnotationCache annotationCache = ExporterCacheManager.CurveAnnotationCache;
IFCAnyHandle curveAnno = annotationCache.GetAnnotation(sketchPlane.Id, curveStyle);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(curveAnno))
{
AddCurvesToAnnotation(curveAnno, curves);
}
else
{
curveAnno = CreateCurveAnnotation(exporterIFC, curveElement, curveElement.Category.Id, sketchPlane.Id, curveLCS, curveStyle, setter, localPlacement, repItemHnd);
productWrapper.AddAnnotation(curveAnno, setter.LevelInfo, true);
annotationCache.AddAnnotation(sketchPlane.Id, curveStyle, curveAnno);
}
}
transaction.Commit();
}
}
/// <summary>
/// Create IfcClassification references from hardwired or custom classification code fields.
/// </summary>
/// <param name="exporterIFC">The exporterIFC class.</param>
/// <param name="file">The IFC file class.</param>
/// <param name="element">The element to export.</param>
/// <param name="elemHnd">The corresponding IFC entity handle.</param>
/// <returns>True if a classification or classification reference is created.</returns>
public static bool CreateClassification(ExporterIFC exporterIFC, IFCFile file, Element element, IFCAnyHandle elemHnd)
{
bool createdClassification = false;
string paramClassificationCode = "";
string baseClassificationCodeFieldName = "ClassificationCode";
IList <string> customClassificationCodeNames = new List <string>();
string classificationName = null;
string classificationCode = null;
string classificationDescription = null;
int customPass = 0;
int standardPass = 1;
int numCustomCodes = ExporterCacheManager.ClassificationCache.CustomClassificationCodeNames.Count;
while (standardPass <= 10)
{
// Create a classification, if it is not set.
string classificationCodeFieldName = null;
if (customPass < numCustomCodes)
{
classificationCodeFieldName = ExporterCacheManager.ClassificationCache.CustomClassificationCodeNames[customPass];
customPass++;
if (string.IsNullOrWhiteSpace(classificationCodeFieldName))
{
continue;
}
}
else
{
classificationCodeFieldName = baseClassificationCodeFieldName;
if (standardPass > 1)
{
classificationCodeFieldName += "(" + standardPass + ")";
}
standardPass++;
}
if (ParameterUtil.GetStringValueFromElementOrSymbol(element, classificationCodeFieldName, out paramClassificationCode) == null)
{
continue;
}
parseClassificationCode(paramClassificationCode, classificationCodeFieldName, out classificationName, out classificationCode, out classificationDescription);
// If classificationName is empty, there is no classification to export.
if (String.IsNullOrEmpty(classificationName))
{
continue;
}
IFCAnyHandle classification;
if (!ExporterCacheManager.ClassificationCache.ClassificationHandles.TryGetValue(classificationName, out classification))
{
IFCClassification savedClassification = new IFCClassification();
if (ExporterCacheManager.ClassificationCache.ClassificationsByName.TryGetValue(classificationName, out savedClassification))
{
if (savedClassification.ClassificationEditionDate == null)
{
IFCAnyHandle editionDate = IFCInstanceExporter.CreateCalendarDate(file, savedClassification.ClassificationEditionDate.Day, savedClassification.ClassificationEditionDate.Month, savedClassification.ClassificationEditionDate.Year);
classification = IFCInstanceExporter.CreateClassification(file, savedClassification.ClassificationSource, savedClassification.ClassificationEdition,
editionDate, savedClassification.ClassificationName);
}
else
{
classification = IFCInstanceExporter.CreateClassification(file, savedClassification.ClassificationSource, savedClassification.ClassificationEdition,
null, savedClassification.ClassificationName);
}
if (!String.IsNullOrEmpty(savedClassification.ClassificationLocation))
{
ExporterCacheManager.ClassificationLocationCache.Add(classificationName, savedClassification.ClassificationLocation);
}
}
else
{
classification = IFCInstanceExporter.CreateClassification(file, "", "", null, classificationName);
}
ExporterCacheManager.ClassificationCache.ClassificationHandles.Add(classificationName, classification);
createdClassification = true;
}
string location = null;
ExporterCacheManager.ClassificationLocationCache.TryGetValue(classificationName, out location);
if (!String.IsNullOrEmpty(classificationCode))
{
InsertClassificationReference(exporterIFC, file, elemHnd, classificationName, classificationCode, classificationDescription, location);
createdClassification = true;
}
}
return(createdClassification);
}
/// <summary>
/// Exports a Rebar to IFC ReinforcingBar.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="rebarItem">The rebar to be exported. This might be an element or a sub-element.</param>
/// <param name="rebarElement">The element that contains the rebar to be exported. This may be the same as rebarItem.</param>
/// <param name="itemIndex">If greater than 0, the index of the first rebar in the rebarItem in the rebarElement, used for naming and GUID creation.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
/// <returns>The set of handles created, to add to the ProductWrapper in the calling function.</returns>
private static ISet <DelayedProductWrapper> ExportRebar(ExporterIFC exporterIFC, object rebarItem, Element rebarElement, int itemIndex, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
HashSet <DelayedProductWrapper> createdRebars = new HashSet <DelayedProductWrapper>();
int rebarQuantity = GetRebarQuantity(rebarItem);
if (rebarQuantity == 0)
{
return(null);
}
using (IFCTransaction transaction = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, rebarElement))
{
bool cannotExportRebar = false;
IFCAnyHandle rebarHandle = ExportRebarAsProxyElementInView(exporterIFC, rebarElement, productWrapper, out cannotExportRebar);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(rebarHandle) || cannotExportRebar)
{
if (!cannotExportRebar)
{
transaction.Commit();
}
return(null); // Rebar doesn't create a group.
}
IFCAnyHandle prodRep = null;
double totalBarLengthUnscale = GetRebarTotalLength(rebarItem);
double volumeUnscale = GetRebarVolume(rebarItem);
double totalBarLength = UnitUtil.ScaleLength(totalBarLengthUnscale);
if (MathUtil.IsAlmostZero(totalBarLength))
{
return(null);
}
ElementId materialId = ElementId.InvalidElementId;
ParameterUtil.GetElementIdValueFromElementOrSymbol(rebarElement, BuiltInParameter.MATERIAL_ID_PARAM, out materialId);
double diameter = GetBarDiameter(rebarItem);
double radius = diameter / 2.0;
double longitudinalBarNominalDiameter = diameter;
double longitudinalBarCrossSectionArea = UnitUtil.ScaleArea(volumeUnscale / totalBarLengthUnscale);
int numberOfBarPositions = GetNumberOfBarPositions(rebarItem);
string steelGrade = NamingUtil.GetOverrideStringValue(rebarElement, "SteelGrade", null);
// Allow use of IFC2x3 or IFC4 naming.
string predefinedType = NamingUtil.GetOverrideStringValue(rebarElement, "BarRole", null);
if (string.IsNullOrWhiteSpace(predefinedType))
{
predefinedType = NamingUtil.GetOverrideStringValue(rebarElement, "PredefinedType", null);
}
IFCReinforcingBarRole role = GetReinforcingBarRole(predefinedType);
string origRebarName = NamingUtil.GetNameOverride(rebarElement, NamingUtil.GetIFCName(rebarElement));
string rebarDescription = NamingUtil.GetDescriptionOverride(rebarElement, null);
string rebarObjectType = NamingUtil.GetObjectTypeOverride(rebarElement, NamingUtil.CreateIFCObjectName(exporterIFC, rebarElement));
string rebarTag = NamingUtil.GetTagOverride(rebarElement, NamingUtil.CreateIFCElementId(rebarElement));
const int maxBarGUIDS = IFCReinforcingBarSubElements.BarEnd - IFCReinforcingBarSubElements.BarStart + 1;
ElementId categoryId = CategoryUtil.GetSafeCategoryId(rebarElement);
IFCAnyHandle originalPlacement = setter.LocalPlacement;
double barLength = totalBarLength / rebarQuantity;
IList <Curve> baseCurves = GetRebarCenterlineCurves(rebarItem, true, false, false);
for (int ii = 0; ii < numberOfBarPositions; ii++)
{
if (!DoesBarExistAtPosition(rebarItem, ii))
{
continue;
}
int indexForNamingAndGUID = (itemIndex > 0) ? ii + itemIndex : ii + 1;
string rebarName = NamingUtil.GetNameOverride(rebarElement, origRebarName + ": " + indexForNamingAndGUID);
Transform barTrf = GetBarPositionTransform(rebarItem, ii);
IList <Curve> curves = new List <Curve>();
double endParam = 0.0;
foreach (Curve baseCurve in baseCurves)
{
if (baseCurve is Arc || baseCurve is Ellipse)
{
if (baseCurve.IsBound)
{
endParam += UnitUtil.ScaleAngle(baseCurve.GetEndParameter(1) - baseCurve.GetEndParameter(0));
}
else
{
endParam += UnitUtil.ScaleAngle(2 * Math.PI);
}
}
else
{
endParam += 1.0;
}
curves.Add(baseCurve.CreateTransformed(barTrf));
}
IFCAnyHandle compositeCurve = GeometryUtil.CreateCompositeCurve(exporterIFC, curves);
IFCAnyHandle sweptDiskSolid = IFCInstanceExporter.CreateSweptDiskSolid(file, compositeCurve, radius, null, 0, endParam);
HashSet <IFCAnyHandle> bodyItems = new HashSet <IFCAnyHandle>();
bodyItems.Add(sweptDiskSolid);
IFCAnyHandle shapeRep = RepresentationUtil.CreateAdvancedSweptSolidRep(exporterIFC, rebarElement, categoryId, exporterIFC.Get3DContextHandle("Body"), bodyItems, null);
IList <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>();
shapeReps.Add(shapeRep);
prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps);
IFCAnyHandle copyLevelPlacement = (ii == 0) ? originalPlacement : ExporterUtil.CopyLocalPlacement(file, originalPlacement);
string rebarGUID = (indexForNamingAndGUID < maxBarGUIDS) ?
GUIDUtil.CreateSubElementGUID(rebarElement, indexForNamingAndGUID + (int)IFCReinforcingBarSubElements.BarStart - 1) :
GUIDUtil.CreateGUID();
IFCAnyHandle elemHnd = IFCInstanceExporter.CreateReinforcingBar(file, rebarGUID, ExporterCacheManager.OwnerHistoryHandle,
rebarName, rebarDescription, rebarObjectType, copyLevelPlacement,
prodRep, rebarTag, steelGrade, longitudinalBarNominalDiameter, longitudinalBarCrossSectionArea,
barLength, role, null);
// We will not add the element ot the productWrapper here, but instead in the function that calls
// ExportRebar. The reason for this is that we don't currently know if the handles such be associated
// to the level or not, depending on whether they will or won't be grouped.
createdRebars.Add(new DelayedProductWrapper(rebarElement, elemHnd, setter.LevelInfo));
ExporterCacheManager.HandleToElementCache.Register(elemHnd, rebarElement.Id);
CategoryUtil.CreateMaterialAssociation(exporterIFC, elemHnd, materialId);
}
}
transaction.Commit();
}
return(createdRebars);
}
/// <summary>
/// Exports an element as building element proxy.
/// </summary>
/// <remarks>
/// This function is called from the Export function, but can also be called directly if you do not
/// want CreateInternalPropertySets to be called.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>The handle if created, null otherwise.</returns>
public static IFCAnyHandle ExportGenericElement(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper, IFCExportInfoPair exportType)
{
if (element == null || geometryElement == null)
{
return(null);
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
if (exportType.ExportInstance == IFCEntityType.UnKnown)
{
exportType.SetValueWithPair(IFCEntityType.IfcBuildingElementProxy, exportType.ValidatedPredefinedType);
}
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(exportType.ExportInstance))
{
return(null);
}
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle instanceHandle = null;
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(null);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
IFCAnyHandle styleHandle = null;
instanceHandle = FamilyExporterUtil.ExportGenericInstance(exportType, exporterIFC, element, productWrapper, placementSetter, ecData, guid, ownerHistory,
representation, exportType.ValidatedPredefinedType, null);
if (exportType.ExportType != IFCEntityType.UnKnown)
{
if (element is FamilyInstance)
{
FamilySymbol familySymbol = (element as FamilyInstance).Symbol;
if (familySymbol != null)
{
HashSet <IFCAnyHandle> propertySetsOpt = new HashSet <IFCAnyHandle>();
IList <IFCAnyHandle> repMapListOpt = new List <IFCAnyHandle>();
styleHandle = FamilyExporterUtil.ExportGenericType(exporterIFC, exportType, exportType.ValidatedPredefinedType,
propertySetsOpt, repMapListOpt, element, familySymbol);
}
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
styleHandle = ExporterUtil.CreateGenericTypeFromElement(element, exportType, file, ownerHistory, exportType.ValidatedPredefinedType, productWrapper);
}
}
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(instanceHandle))
{
productWrapper.AddElement(element, instanceHandle, placementSetter.LevelInfo, ecData, true, exportType);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
ExporterCacheManager.TypeRelationsCache.Add(styleHandle, instanceHandle);
}
}
}
tr.Commit();
}
}
return(instanceHandle);
}
private static int CalculateRequestDataSize(string name)
{
var dataSize = ClientMessage.HeaderSize;
dataSize += ParameterUtil.CalculateDataSize(name);
return dataSize;
}
/// <summary>
/// Exports an element as an IfcReinforcingMesh.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if exported successfully, false otherwise.</returns>
public static bool ExportFabricSheet(ExporterIFC exporterIFC, FabricSheet sheet,
GeometryElement geometryElement, ProductWrapper productWrapper)
{
if (sheet == null || geometryElement == null)
{
return(false);
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcReinforcingMesh;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return(false);
}
Document doc = sheet.Document;
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, sheet, out overrideContainerHnd);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, sheet, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(sheet);
ElementId materialId = ElementId.InvalidElementId;
ParameterUtil.GetElementIdValueFromElementOrSymbol(sheet, BuiltInParameter.MATERIAL_ID_PARAM, out materialId);
string guid = GUIDUtil.CreateGUID(sheet);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string revitObjectType = NamingUtil.GetFamilyAndTypeName(sheet);
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
string steelGrade = NamingUtil.GetOverrideStringValue(sheet, "SteelGrade", null);
double?meshLength = sheet.CutOverallLength;
double?meshWidth = sheet.CutOverallWidth;
Element fabricSheetTypeElem = doc.GetElement(sheet.GetTypeId());
FabricSheetType fabricSheetType = (fabricSheetTypeElem == null) ? null : (fabricSheetTypeElem as FabricSheetType);
double longitudinalBarNominalDiameter = 0.0;
double transverseBarNominalDiameter = 0.0;
double longitudinalBarCrossSectionArea = 0.0;
double transverseBarCrossSectionArea = 0.0;
double longitudinalBarSpacing = 0.0;
double transverseBarSpacing = 0.0;
if (fabricSheetType != null)
{
Element majorFabricWireTypeElem = doc.GetElement(fabricSheetType.MajorDirectionWireType);
FabricWireType majorFabricWireType = (majorFabricWireTypeElem == null) ? null : (majorFabricWireTypeElem as FabricWireType);
if (majorFabricWireType != null)
{
longitudinalBarNominalDiameter = UnitUtil.ScaleLength(majorFabricWireType.WireDiameter);
double localRadius = longitudinalBarNominalDiameter / 2.0;
longitudinalBarCrossSectionArea = localRadius * localRadius * Math.PI;
}
Element minorFabricWireTypeElem = doc.GetElement(fabricSheetType.MinorDirectionWireType);
FabricWireType minorFabricWireType = (minorFabricWireTypeElem == null) ? null : (minorFabricWireTypeElem as FabricWireType);
if (minorFabricWireType != null)
{
transverseBarNominalDiameter = UnitUtil.ScaleLength(minorFabricWireType.WireDiameter);
double localRadius = transverseBarNominalDiameter / 2.0;
transverseBarCrossSectionArea = localRadius * localRadius * Math.PI;
}
longitudinalBarSpacing = UnitUtil.ScaleLength(fabricSheetType.MajorSpacing);
transverseBarSpacing = UnitUtil.ScaleLength(fabricSheetType.MinorSpacing);
}
ISet <IFCAnyHandle> bodyItems = new HashSet <IFCAnyHandle>();
IList <Curve> wireCenterlines = sheet.GetWireCenterlines(WireDistributionDirection.Major);
foreach (Curve wireCenterline in wireCenterlines)
{
IFCAnyHandle bodyItem = GeometryUtil.CreateSweptDiskSolid(exporterIFC, file, wireCenterline, longitudinalBarNominalDiameter, null);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(bodyItem))
{
bodyItems.Add(bodyItem);
}
}
wireCenterlines = sheet.GetWireCenterlines(WireDistributionDirection.Minor);
foreach (Curve wireCenterline in wireCenterlines)
{
IFCAnyHandle bodyItem = GeometryUtil.CreateSweptDiskSolid(exporterIFC, file, wireCenterline, transverseBarNominalDiameter, null);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(bodyItem))
{
bodyItems.Add(bodyItem);
}
}
IFCAnyHandle shapeRep = (bodyItems.Count > 0) ?
RepresentationUtil.CreateAdvancedSweptSolidRep(exporterIFC, sheet, categoryId, exporterIFC.Get3DContextHandle("Body"), bodyItems, null) :
null;
IList <IFCAnyHandle> shapeReps = null;
if (shapeRep != null)
{
shapeReps = new List <IFCAnyHandle>();
shapeReps.Add(shapeRep);
}
IFCAnyHandle prodRep = (shapeReps != null) ? IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps) : null;
IFCAnyHandle fabricSheet = IFCInstanceExporter.CreateReinforcingMesh(exporterIFC, sheet, guid, ownerHistory, localPlacement,
prodRep, steelGrade, meshLength, meshWidth, longitudinalBarNominalDiameter, transverseBarNominalDiameter,
longitudinalBarCrossSectionArea, transverseBarCrossSectionArea, longitudinalBarSpacing, transverseBarSpacing);
IFCExportInfoPair exportInfo = new IFCExportInfoPair(IFCEntityType.IfcReinforcingMesh);
ElementId fabricAreaId = sheet.FabricAreaOwnerId;
if (fabricAreaId != ElementId.InvalidElementId)
{
HashSet <IFCAnyHandle> fabricSheets = null;
if (!ExporterCacheManager.FabricAreaHandleCache.TryGetValue(fabricAreaId, out fabricSheets))
{
fabricSheets = new HashSet <IFCAnyHandle>();
ExporterCacheManager.FabricAreaHandleCache[fabricAreaId] = fabricSheets;
}
fabricSheets.Add(fabricSheet);
}
productWrapper.AddElement(sheet, fabricSheet, placementSetter.LevelInfo, ecData, true, exportInfo);
CategoryUtil.CreateMaterialAssociation(exporterIFC, fabricSheet, materialId);
}
}
tr.Commit();
return(true);
}
}
/// <summary>
/// Exports a MEP family instance.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="exportType">The export type of the element.
/// <param name="ifcEnumType">The sub-type of the element.</param></param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if an entity was created, false otherwise.</returns>
public static bool Export(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
IFCExportInfoPair exportType, string ifcEnumType, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
// CQ_TODO: Clean up this code by at least factoring it out.
// If we are exporting a duct segment, we may need to split it into parts by level. Create a list of ranges.
IList <ElementId> levels = new List <ElementId>();
IList <IFCRange> ranges = new List <IFCRange>();
// We will not split duct segments if the assemblyId is set, as we would like to keep the original duct segment
// associated with the assembly, on the level of the assembly.
if ((exportType.ExportType == IFCEntityType.IfcDuctSegmentType) &&
(ExporterCacheManager.ExportOptionsCache.WallAndColumnSplitting) &&
(element.AssemblyInstanceId == ElementId.InvalidElementId))
{
LevelUtil.CreateSplitLevelRangesForElement(exporterIFC, exportType, element, out levels,
out ranges);
}
int numPartsToExport = ranges.Count;
{
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (0 == numPartsToExport)
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
BodyData bodyData = null;
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
extraParams.SetLocalPlacement(localPlacementToUse);
IFCAnyHandle productRepresentation =
RepresentationUtil.CreateAppropriateProductDefinitionShape(
exporterIFC, element, catId, geometryElement, bodyExporterOptions, null, extraParams, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(productRepresentation))
{
extraParams.ClearOpenings();
return(false);
}
ExportAsMappedItem(exporterIFC, element, file, exportType, ifcEnumType, extraParams,
setter, localPlacementToUse, productRepresentation,
productWrapper);
}
}
}
else
{
for (int ii = 0; ii < numPartsToExport; ii++)
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, levels[ii], overrideContainerHnd))
{
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
SolidMeshGeometryInfo solidMeshCapsule =
GeometryUtil.GetClippedSolidMeshGeometry(geometryElement, ranges[ii]);
IList <Solid> solids = solidMeshCapsule.GetSolids();
IList <Mesh> polyMeshes = solidMeshCapsule.GetMeshes();
IList <GeometryObject> geomObjects =
FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(element.Document,
exporterIFC, ref solids, ref polyMeshes);
if (geomObjects.Count == 0 && (solids.Count > 0 || polyMeshes.Count > 0))
{
return(false);
}
bool tryToExportAsExtrusion = (!exporterIFC.ExportAs2x2 ||
(exportType.ExportInstance == IFCEntityType.IfcColumn));
if (exportType.ExportInstance == IFCEntityType.IfcColumn)
{
extraParams.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ;
}
else
{
extraParams.PossibleExtrusionAxes = IFCExtrusionAxes.TryXYZ;
}
BodyData bodyData = null;
if (geomObjects.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId,
ElementId.InvalidElementId, geomObjects,
bodyExporterOptions, extraParams);
}
else
{
IList <GeometryObject> exportedGeometries = new List <GeometryObject>();
exportedGeometries.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId,
ElementId.InvalidElementId,
exportedGeometries, bodyExporterOptions,
extraParams);
}
List <IFCAnyHandle> bodyReps = new List <IFCAnyHandle>();
bodyReps.Add(bodyData.RepresentationHnd);
IFCAnyHandle productRepresentation =
IFCInstanceExporter.CreateProductDefinitionShape(exporterIFC.GetFile(), null,
null, bodyReps);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(productRepresentation))
{
extraParams.ClearOpenings();
return(false);
}
ExportAsMappedItem(exporterIFC, element, file, exportType, ifcEnumType,
extraParams, setter, localPlacementToUse,
productRepresentation, productWrapper);
}
}
}
}
}
tr.Commit();
}
return(true);
}
/// <summary>
/// Process to create element quantity.
/// </summary>
/// <param name="file">
/// The IFC file.
/// </param>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="extrusionCreationData">
/// The IFCExtrusionCreationData.
/// </param>
/// <param name="element">
/// The element of which this property is created for.
/// </param>
/// <param name="elementType">
/// The element type of which this quantity is created for.
/// </param>
/// <returns>
/// Then created quantity handle.
/// </returns>
public IFCAnyHandle ProcessEntry(IFCFile file, ExporterIFC exporterIFC,
IFCExtrusionCreationData extrusionCreationData, Element element, ElementType elementType)
{
bool useProperty = (!String.IsNullOrEmpty(RevitParameterName)) || (RevitBuiltInParameter != BuiltInParameter.INVALID);
bool success = false;
double val = 0;
if (useProperty)
{
success = (ParameterUtil.GetDoubleValueFromElementOrSymbol(element, RevitParameterName, out val) != null);
if (!success && RevitBuiltInParameter != BuiltInParameter.INVALID)
{
success = (ParameterUtil.GetDoubleValueFromElementOrSymbol(element, RevitBuiltInParameter, out val) != null);
}
if (success) // factor in the scale factor for all the parameters depending of the data type to get the correct value
{
switch (m_QuantityType)
{
case QuantityType.PositiveLength:
val = UnitUtil.ScaleLength(val);
break;
case QuantityType.Area:
val = UnitUtil.ScaleArea(val);
break;
case QuantityType.Volume:
val = UnitUtil.ScaleVolume(val);
break;
default:
break;
}
}
}
if (PropertyCalculator != null && !success)
{
success = PropertyCalculator.Calculate(exporterIFC, extrusionCreationData, element, elementType);
if (success)
{
val = PropertyCalculator.GetDoubleValue();
}
}
IFCAnyHandle quantityHnd = null;
if (success)
{
switch (QuantityType)
{
case QuantityType.PositiveLength:
quantityHnd = IFCInstanceExporter.CreateQuantityLength(file, PropertyName, MethodOfMeasurement, null, val);
break;
case QuantityType.Area:
quantityHnd = IFCInstanceExporter.CreateQuantityArea(file, PropertyName, MethodOfMeasurement, null, val);
break;
case QuantityType.Volume:
quantityHnd = IFCInstanceExporter.CreateQuantityVolume(file, PropertyName, MethodOfMeasurement, null, val);
break;
default:
throw new InvalidOperationException("Missing case!");
}
}
return(quantityHnd);
}
/// <summary>
/// Export Curtain Walls and Roofs.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="allSubElements">Collection of elements contained in the host curtain element.</param>
/// <param name="element">The element to be exported.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
private static void ExportBase(ExporterIFC exporterIFC, ICollection <ElementId> allSubElements, Element element, ProductWrapper wrapper)
{
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcRoof;
if (element is Wall || element is CurtainSystem || IsLegacyCurtainElement(element))
{
elementClassTypeEnum = Common.Enums.IFCEntityType.IfcCurtainWall;
}
else if (element is RoofBase)
{
elementClassTypeEnum = Common.Enums.IFCEntityType.IfcRoof;
}
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
PlacementSetter setter = null;
using (ProductWrapper curtainWallSubWrapper = ProductWrapper.Create(wrapper, false))
{
try
{
Transform orientationTrf = Transform.Identity;
IFCAnyHandle localPlacement = null;
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
setter = PlacementSetter.Create(exporterIFC, element, null, orientationTrf, overrideContainerId, overrideContainerHnd);
localPlacement = setter.LocalPlacement;
string objectType = NamingUtil.CreateIFCObjectName(exporterIFC, element);
IFCAnyHandle prodRepHnd = null;
IFCAnyHandle elemHnd = null;
string elemGUID = GUIDUtil.CreateGUID(element);
if (element is Wall || element is CurtainSystem || IsLegacyCurtainElement(element))
{
elemHnd = IFCInstanceExporter.CreateCurtainWall(exporterIFC, element, elemGUID, ownerHistory, localPlacement, prodRepHnd, null);
}
else if (element is RoofBase)
{
//need to convert the string to enum
string ifcEnumType = ExporterUtil.GetIFCTypeFromExportTable(exporterIFC, element);
//ifcEnumType = IFCValidateEntry.GetValidIFCPredefinedType(element, ifcEnumType);
elemHnd = IFCInstanceExporter.CreateRoof(exporterIFC, element, elemGUID, ownerHistory, localPlacement, prodRepHnd, ifcEnumType);
}
else
{
return;
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(elemHnd))
{
return;
}
wrapper.AddElement(element, elemHnd, setter, null, true, null);
bool canExportCurtainWallAsContainer = CanExportCurtainWallAsContainer(allSubElements, element.Document);
IFCAnyHandle rep = null;
if (!canExportCurtainWallAsContainer)
{
rep = ExportCurtainObjectCommonAsOneBRep(allSubElements, element, exporterIFC, setter, localPlacement);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(rep))
{
return;
}
}
else
{
ExportCurtainObjectCommonAsContainer(allSubElements, element, exporterIFC, curtainWallSubWrapper, setter);
}
ICollection <IFCAnyHandle> relatedElementIds = curtainWallSubWrapper.GetAllObjects();
if (relatedElementIds.Count > 0)
{
string guid = GUIDUtil.CreateSubElementGUID(element, (int)IFCCurtainWallSubElements.RelAggregates);
HashSet <IFCAnyHandle> relatedElementIdSet = new HashSet <IFCAnyHandle>(relatedElementIds);
IFCInstanceExporter.CreateRelAggregates(file, guid, ownerHistory, null, null, elemHnd, relatedElementIdSet);
}
ExportCurtainWallType(exporterIFC, wrapper, elemHnd, element);
SpaceBoundingElementUtil.RegisterSpaceBoundingElementHandle(exporterIFC, elemHnd, element.Id, ElementId.InvalidElementId);
}
finally
{
if (setter != null)
{
setter.Dispose();
}
}
}
}
/// <summary>
/// Exports an element as a covering of type insulation.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if exported successfully, false otherwise.</returns>
public static bool ExportDuctLining(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper)
{
if (element == null || geometryElement == null)
{
return(false);
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcCovering;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return(false);
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainer = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainer);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainer))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(false);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
string ifcType = "Wrapping";
IFCAnyHandle ductLining = IFCInstanceExporter.CreateCovering(exporterIFC, element, guid,
ownerHistory, localPlacement, representation, ifcType);
ExporterCacheManager.ElementToHandleCache.Register(element.Id, ductLining);
IFCExportInfoPair exportInfo = new IFCExportInfoPair(IFCEntityType.IfcCovering, ifcType);
productWrapper.AddElement(element, ductLining, placementSetter.LevelInfo, ecData, true, exportInfo);
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, element);
CategoryUtil.CreateMaterialAssociation(exporterIFC, ductLining, matId);
}
}
tr.Commit();
return(true);
}
}
/// <summary>
/// Exports an element to IfcPile.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="ifcEnumType">The string value represents the IFC type.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportPile(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
string ifcEnumType, ProductWrapper productWrapper)
{
// NOTE: We expect to incorporate this code into the generic FamilyInstanceExporter at some point.
// export parts or not
bool exportParts = PartExporter.CanExportParts(element);
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(setter.LocalPlacement);
IFCAnyHandle prodRep = null;
ElementId matId = ElementId.InvalidElementId;
if (!exportParts)
{
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
StructuralMemberAxisInfo axisInfo = StructuralMemberExporter.GetStructuralMemberAxisTransform(element);
if (axisInfo != null)
{
ecData.CustomAxis = axisInfo.AxisDirection;
ecData.PossibleExtrusionAxes = IFCExtrusionAxes.TryCustom;
}
else
{
ecData.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ;
}
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
element, catId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
string instanceGUID = GUIDUtil.CreateGUID(element);
IFCExportInfoPair exportInfo = new IFCExportInfoPair(Common.Enums.IFCEntityType.IfcPile, ifcEnumType);
IFCAnyHandle pile = IFCInstanceExporter.CreatePile(exporterIFC, element, instanceGUID, ExporterCacheManager.OwnerHistoryHandle,
ecData.GetLocalPlacement(), prodRep, ifcEnumType, null);
// TODO: to allow shared geometry for Piles. For now, Pile export will not use shared geometry
if (exportInfo.ExportType != Common.Enums.IFCEntityType.UnKnown)
{
IFCAnyHandle type = ExporterUtil.CreateGenericTypeFromElement(element, exportInfo, file, ExporterCacheManager.OwnerHistoryHandle, exportInfo.ValidatedPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(type, pile);
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, element, pile, productWrapper, setter, setter.LocalPlacement, null);
}
else
{
if (matId != ElementId.InvalidElementId)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, pile, matId);
}
}
productWrapper.AddElement(element, pile, setter, ecData, true, exportInfo);
OpeningUtil.CreateOpeningsIfNecessary(pile, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
tr.Commit();
}
}
