/// <summary>
/// Test a triangle for quality and size.
/// </summary>
/// <param name="testtri">Triangle to check.</param>
/// <remarks>
/// Tests a triangle to see if it satisfies the minimum angle condition and
/// the maximum area condition. Triangles that aren't up to spec are added
/// to the bad triangle queue.
/// </remarks>
public void TestTriangle(ref Otri testtri)
{
Otri tri1 = default(Otri), tri2 = default(Otri);
Osub testsub = default(Osub);
Vertex torg, tdest, tapex;
Vertex base1, base2;
Vertex org1, dest1, org2, dest2;
Vertex joinvertex;
float dxod, dyod, dxda, dyda, dxao, dyao;
float dxod2, dyod2, dxda2, dyda2, dxao2, dyao2;
float apexlen, orglen, destlen, minedge;
float angle;
float area;
float dist1, dist2;
float maxangle;
torg = testtri.Org();
tdest = testtri.Dest();
tapex = testtri.Apex();
dxod = torg.x - tdest.x;
dyod = torg.y - tdest.y;
dxda = tdest.x - tapex.x;
dyda = tdest.y - tapex.y;
dxao = tapex.x - torg.x;
dyao = tapex.y - torg.y;
dxod2 = dxod * dxod;
dyod2 = dyod * dyod;
dxda2 = dxda * dxda;
dyda2 = dyda * dyda;
dxao2 = dxao * dxao;
dyao2 = dyao * dyao;
// Find the lengths of the triangle's three edges.
apexlen = dxod2 + dyod2;
orglen = dxda2 + dyda2;
destlen = dxao2 + dyao2;
if ((apexlen < orglen) && (apexlen < destlen))
{
// The edge opposite the apex is shortest.
minedge = apexlen;
// Find the square of the cosine of the angle at the apex.
angle = dxda * dxao + dyda * dyao;
angle = angle * angle / (orglen * destlen);
base1 = torg;
base2 = tdest;
testtri.Copy(ref tri1);
}
else if (orglen < destlen)
{
// The edge opposite the origin is shortest.
minedge = orglen;
// Find the square of the cosine of the angle at the origin.
angle = dxod * dxao + dyod * dyao;
angle = angle * angle / (apexlen * destlen);
base1 = tdest;
base2 = tapex;
testtri.Lnext(ref tri1);
}
else
{
// The edge opposite the destination is shortest.
minedge = destlen;
// Find the square of the cosine of the angle at the destination.
angle = dxod * dxda + dyod * dyda;
angle = angle * angle / (apexlen * orglen);
base1 = tapex;
base2 = torg;
testtri.Lprev(ref tri1);
}
if (behavior.VarArea || behavior.fixedArea || behavior.Usertest)
{
// Check whether the area is larger than permitted.
area = 0.5f * (dxod * dyda - dyod * dxda);
if (behavior.fixedArea && (area > behavior.MaxArea))
{
// Add this triangle to the list of bad triangles.
queue.Enqueue(ref testtri, minedge, tapex, torg, tdest);
return;
}
// Nonpositive area constraints are treated as unconstrained.
if ((behavior.VarArea) && (area > testtri.triangle.area) && (testtri.triangle.area > 0.0))
{
// Add this triangle to the list of bad triangles.
queue.Enqueue(ref testtri, minedge, tapex, torg, tdest);
return;
}
}
// find the maximum edge and accordingly the pqr orientation
if ((apexlen > orglen) && (apexlen > destlen))
{
// The edge opposite the apex is longest.
// maxedge = apexlen;
// Find the cosine of the angle at the apex.
maxangle = (orglen + destlen - apexlen) / (2 * UnityEngine.Mathf.Sqrt(orglen * destlen));
}
else if (orglen > destlen)
{
// The edge opposite the origin is longest.
// maxedge = orglen;
// Find the cosine of the angle at the origin.
maxangle = (apexlen + destlen - orglen) / (2 * UnityEngine.Mathf.Sqrt(apexlen * destlen));
}
else
{
// The edge opposite the destination is longest.
// maxedge = destlen;
// Find the cosine of the angle at the destination.
maxangle = (apexlen + orglen - destlen) / (2 * UnityEngine.Mathf.Sqrt(apexlen * orglen));
}
// Check whether the angle is smaller than permitted.
if ((angle > behavior.goodAngle) || (maxangle < behavior.maxGoodAngle && behavior.MaxAngle != 0.0))
{
// Use the rules of Miller, Pav, and Walkington to decide that certain
// triangles should not be split, even if they have bad angles.
// A skinny triangle is not split if its shortest edge subtends a
// small input angle, and both endpoints of the edge lie on a
// concentric circular shell. For convenience, I make a small
// adjustment to that rule: I check if the endpoints of the edge
// both lie in segment interiors, equidistant from the apex where
// the two segments meet.
// First, check if both points lie in segment interiors.
if ((base1.type == VertexType.SegmentVertex) &&
(base2.type == VertexType.SegmentVertex))
{
// Check if both points lie in a common segment. If they do, the
// skinny triangle is enqueued to be split as usual.
tri1.SegPivot(ref testsub);
if (testsub.seg == Mesh.dummysub)
{
// No common segment. Find a subsegment that contains 'torg'.
tri1.Copy(ref tri2);
do
{
tri1.OprevSelf();
tri1.SegPivot(ref testsub);
} while (testsub.seg == Mesh.dummysub);
// Find the endpoints of the containing segment.
org1 = testsub.SegOrg();
dest1 = testsub.SegDest();
// Find a subsegment that contains 'tdest'.
do
{
tri2.DnextSelf();
tri2.SegPivot(ref testsub);
} while (testsub.seg == Mesh.dummysub);
// Find the endpoints of the containing segment.
org2 = testsub.SegOrg();
dest2 = testsub.SegDest();
// Check if the two containing segments have an endpoint in common.
joinvertex = null;
if ((dest1.x == org2.x) && (dest1.y == org2.y))
{
joinvertex = dest1;
}
else if ((org1.x == dest2.x) && (org1.y == dest2.y))
{
joinvertex = org1;
}
if (joinvertex != null)
{
// Compute the distance from the common endpoint (of the two
// segments) to each of the endpoints of the shortest edge.
dist1 = ((base1.x - joinvertex.x) * (base1.x - joinvertex.x) +
(base1.y - joinvertex.y) * (base1.y - joinvertex.y));
dist2 = ((base2.x - joinvertex.x) * (base2.x - joinvertex.x) +
(base2.y - joinvertex.y) * (base2.y - joinvertex.y));
// If the two distances are equal, don't split the triangle.
if ((dist1 < 1.001 * dist2) && (dist1 > 0.999 * dist2))
{
// Return now to avoid enqueueing the bad triangle.
return;
}
}
}
}
// Add this triangle to the list of bad triangles.
queue.Enqueue(ref testtri, minedge, tapex, torg, tdest);
}
}
private void ConstructBoundaryBvdCell(Vertex vertex)
{
VoronoiRegion region = new VoronoiRegion(vertex);
regions.Add(region);
Otri f = default(Otri);
Otri f_init = default(Otri);
Otri f_next = default(Otri);
Otri f_prev = default(Otri);
Osub sf = default(Osub);
Osub sfn = default(Osub);
Vertex torg, tdest, tapex, sorg, sdest;
Point cc_f, cc_f_next, p;
int n = mesh.triangles.Count;
// Call P the polygon (cell) in construction
List <Point> vpoints = new List <Point>();
// Call f_init a triangle incident to x
vertex.tri.Copy(ref f_init);
if (f_init.Org() != vertex)
{
throw new Exception("ConstructBoundaryBvdCell: inconsistent topology.");
}
// Let f be initialized to f_init
f_init.Copy(ref f);
// Call f_next the next triangle counterclockwise around x
f_init.Onext(ref f_next);
f_init.Oprev(ref f_prev);
// Is the border to the left?
if (f_prev.triangle != Mesh.dummytri)
{
// Go clockwise until we reach the border (or the initial triangle)
while (f_prev.triangle != Mesh.dummytri && !f_prev.Equal(f_init))
{
f_prev.Copy(ref f);
f_prev.OprevSelf();
}
f.Copy(ref f_init);
f.Onext(ref f_next);
}
if (f_prev.triangle == Mesh.dummytri)
{
// For vertices on the domain boundaray, add the vertex. For
// internal boundaries don't add it.
p = new Point(vertex.x, vertex.y);
p.id = n + segIndex;
points[n + segIndex] = p;
segIndex++;
vpoints.Add(p);
}
// Add midpoint of start triangles' edge.
torg = f.Org();
tdest = f.Dest();
p = new Point((torg.X + tdest.X) / 2, (torg.Y + tdest.Y) / 2);
p.id = n + segIndex;
points[n + segIndex] = p;
segIndex++;
vpoints.Add(p);
// repeat ... until f = f_init
do
{
// Call Lffnext the line going through the circumcenters of f and f_next
cc_f = this.points[f.triangle.id];
if (f_next.triangle == Mesh.dummytri)
{
if (!f.triangle.infected)
{
// Add last circumcenter
vpoints.Add(cc_f);
}
// Add midpoint of last triangles' edge (chances are it has already
// been added, so post process cell to remove duplicates???)
torg = f.Org();
tapex = f.Apex();
p = new Point((torg.X + tapex.X) / 2, (torg.Y + tapex.Y) / 2);
p.id = n + segIndex;
points[n + segIndex] = p;
segIndex++;
vpoints.Add(p);
break;
}
cc_f_next = this.points[f_next.triangle.id];
// if f is tagged non-blind then
if (!f.triangle.infected)
{
// Insert the circumcenter of f into P
vpoints.Add(cc_f);
if (f_next.triangle.infected)
{
// Call S_fnext the constrained edge blinding f_next
sfn.seg = subsegMap[f_next.triangle.hash];
// Insert point Lf,f_next /\ Sf_next into P
if (SegmentsIntersect(sfn.SegOrg(), sfn.SegDest(), cc_f, cc_f_next, out p, true))
{
p.id = n + segIndex;
points[n + segIndex] = p;
segIndex++;
vpoints.Add(p);
}
}
}
else
{
// Call Sf the constrained edge blinding f
sf.seg = subsegMap[f.triangle.hash];
sorg = sf.SegOrg();
sdest = sf.SegDest();
// if f_next is tagged non-blind then
if (!f_next.triangle.infected)
{
tdest = f.Dest();
tapex = f.Apex();
// Both circumcenters lie on the blinded side, but we
// have to add the intersection with the segment.
// Center of f edge dest->apex
Point bisec = new Point((tdest.X + tapex.X) / 2, (tdest.Y + tapex.Y) / 2);
// Find intersection of seg with line through f's bisector and circumcenter
if (SegmentsIntersect(sorg, sdest, bisec, cc_f, out p, false))
{
p.id = n + segIndex;
points[n + segIndex] = p;
segIndex++;
vpoints.Add(p);
}
// Insert point Lf,f_next /\ Sf into P
if (SegmentsIntersect(sorg, sdest, cc_f, cc_f_next, out p, true))
{
p.id = n + segIndex;
points[n + segIndex] = p;
segIndex++;
vpoints.Add(p);
}
}
else
{
// Call Sf_next the constrained edge blinding f_next
sfn.seg = subsegMap[f_next.triangle.hash];
// if Sf != Sf_next then
if (!sf.Equal(sfn))
{
// Insert Lf,fnext /\ Sf and Lf,fnext /\ Sfnext into P
if (SegmentsIntersect(sorg, sdest, cc_f, cc_f_next, out p, true))
{
p.id = n + segIndex;
points[n + segIndex] = p;
segIndex++;
vpoints.Add(p);
}
if (SegmentsIntersect(sfn.SegOrg(), sfn.SegDest(), cc_f, cc_f_next, out p, true))
{
p.id = n + segIndex;
points[n + segIndex] = p;
segIndex++;
vpoints.Add(p);
}
}
else
{
// Both circumcenters lie on the blinded side, but we
// have to add the intersection with the segment.
// Center of f_next edge org->dest
Point bisec = new Point((torg.X + tdest.X) / 2, (torg.Y + tdest.Y) / 2);
// Find intersection of seg with line through f_next's bisector and circumcenter
if (SegmentsIntersect(sorg, sdest, bisec, cc_f_next, out p, false))
{
p.id = n + segIndex;
points[n + segIndex] = p;
segIndex++;
vpoints.Add(p);
}
}
}
}
// f <- f_next
f_next.Copy(ref f);
// Call f_next the next triangle counterclockwise around x
f_next.OnextSelf();
}while (!f.Equal(f_init));
// Output: Bounded Voronoi cell of x in counterclockwise order.
region.Add(vpoints);
}
private void ConstructBvdCell(Vertex vertex)
{
VoronoiRegion region = new VoronoiRegion(vertex);
regions.Add(region);
Otri f = default(Otri);
Otri f_init = default(Otri);
Otri f_next = default(Otri);
Osub sf = default(Osub);
Osub sfn = default(Osub);
Point cc_f, cc_f_next, p;
int n = mesh.triangles.Count;
// Call P the polygon (cell) in construction
List <Point> vpoints = new List <Point>();
// Call f_init a triangle incident to x
vertex.tri.Copy(ref f_init);
if (f_init.Org() != vertex)
{
throw new Exception("ConstructBvdCell: inconsistent topology.");
}
// Let f be initialized to f_init
f_init.Copy(ref f);
// Call f_next the next triangle counterclockwise around x
f_init.Onext(ref f_next);
// repeat ... until f = f_init
do
{
// Call Lffnext the line going through the circumcenters of f and f_next
cc_f = this.points[f.triangle.id];
cc_f_next = this.points[f_next.triangle.id];
// if f is tagged non-blind then
if (!f.triangle.infected)
{
// Insert the circumcenter of f into P
vpoints.Add(cc_f);
if (f_next.triangle.infected)
{
// Call S_fnext the constrained edge blinding f_next
sfn.seg = subsegMap[f_next.triangle.hash];
// Insert point Lf,f_next /\ Sf_next into P
if (SegmentsIntersect(sfn.SegOrg(), sfn.SegDest(), cc_f, cc_f_next, out p, true))
{
p.id = n + segIndex;
points[n + segIndex] = p;
segIndex++;
vpoints.Add(p);
}
}
}
else
{
// Call Sf the constrained edge blinding f
sf.seg = subsegMap[f.triangle.hash];
// if f_next is tagged non-blind then
if (!f_next.triangle.infected)
{
// Insert point Lf,f_next /\ Sf into P
if (SegmentsIntersect(sf.SegOrg(), sf.SegDest(), cc_f, cc_f_next, out p, true))
{
p.id = n + segIndex;
points[n + segIndex] = p;
segIndex++;
vpoints.Add(p);
}
}
else
{
// Call Sf_next the constrained edge blinding f_next
sfn.seg = subsegMap[f_next.triangle.hash];
// if Sf != Sf_next then
if (!sf.Equal(sfn))
{
// Insert Lf,fnext /\ Sf and Lf,fnext /\ Sfnext into P
if (SegmentsIntersect(sf.SegOrg(), sf.SegDest(), cc_f, cc_f_next, out p, true))
{
p.id = n + segIndex;
points[n + segIndex] = p;
segIndex++;
vpoints.Add(p);
}
if (SegmentsIntersect(sfn.SegOrg(), sfn.SegDest(), cc_f, cc_f_next, out p, true))
{
p.id = n + segIndex;
points[n + segIndex] = p;
segIndex++;
vpoints.Add(p);
}
}
}
}
// f <- f_next
f_next.Copy(ref f);
// Call f_next the next triangle counterclockwise around x
f_next.OnextSelf();
}while (!f.Equal(f_init));
// Output: Bounded Voronoi cell of x in counterclockwise order.
region.Add(vpoints);
}
private void ConstructBoundaryBvdCell(Vertex vertex)
{
Vertex vertex1;
Point point;
VoronoiRegion voronoiRegion = new VoronoiRegion(vertex);
this.regions.Add(voronoiRegion);
Otri otri = new Otri();
Otri otri1 = new Otri();
Otri otri2 = new Otri();
Otri otri3 = new Otri();
Osub item = new Osub();
Osub osub = new Osub();
int count = this.mesh.triangles.Count;
List <Point> points = new List <Point>();
vertex.tri.Copy(ref otri1);
if (otri1.Org() != vertex)
{
throw new Exception("ConstructBoundaryBvdCell: inconsistent topology.");
}
otri1.Copy(ref otri);
otri1.Onext(ref otri2);
otri1.Oprev(ref otri3);
if (otri3.triangle != Mesh.dummytri)
{
while (otri3.triangle != Mesh.dummytri && !otri3.Equal(otri1))
{
otri3.Copy(ref otri);
otri3.OprevSelf();
}
otri.Copy(ref otri1);
otri.Onext(ref otri2);
}
if (otri3.triangle == Mesh.dummytri)
{
point = new Point(vertex.x, vertex.y)
{
id = count + this.segIndex
};
this.points[count + this.segIndex] = point;
this.segIndex = this.segIndex + 1;
points.Add(point);
}
Vertex vertex2 = otri.Org();
Vertex vertex3 = otri.Dest();
point = new Point((vertex2.X + vertex3.X) / 2, (vertex2.Y + vertex3.Y) / 2)
{
id = count + this.segIndex
};
this.points[count + this.segIndex] = point;
this.segIndex = this.segIndex + 1;
points.Add(point);
do
{
Point point1 = this.points[otri.triangle.id];
if (otri2.triangle != Mesh.dummytri)
{
Point point2 = this.points[otri2.triangle.id];
if (otri.triangle.infected)
{
item.seg = this.subsegMap[otri.triangle.hash];
Vertex vertex4 = item.SegOrg();
Vertex vertex5 = item.SegDest();
if (otri2.triangle.infected)
{
osub.seg = this.subsegMap[otri2.triangle.hash];
if (!item.Equal(osub))
{
if (this.SegmentsIntersect(vertex4, vertex5, point1, point2, out point, true))
{
point.id = count + this.segIndex;
this.points[count + this.segIndex] = point;
this.segIndex = this.segIndex + 1;
points.Add(point);
}
if (this.SegmentsIntersect(osub.SegOrg(), osub.SegDest(), point1, point2, out point, true))
{
point.id = count + this.segIndex;
this.points[count + this.segIndex] = point;
this.segIndex = this.segIndex + 1;
points.Add(point);
}
}
else if (this.SegmentsIntersect(vertex4, vertex5, new Point((vertex2.X + vertex3.X) / 2, (vertex2.Y + vertex3.Y) / 2), point2, out point, false))
{
point.id = count + this.segIndex;
this.points[count + this.segIndex] = point;
this.segIndex = this.segIndex + 1;
points.Add(point);
}
}
else
{
vertex3 = otri.Dest();
vertex1 = otri.Apex();
if (this.SegmentsIntersect(vertex4, vertex5, new Point((vertex3.X + vertex1.X) / 2, (vertex3.Y + vertex1.Y) / 2), point1, out point, false))
{
point.id = count + this.segIndex;
this.points[count + this.segIndex] = point;
this.segIndex = this.segIndex + 1;
points.Add(point);
}
if (this.SegmentsIntersect(vertex4, vertex5, point1, point2, out point, true))
{
point.id = count + this.segIndex;
this.points[count + this.segIndex] = point;
this.segIndex = this.segIndex + 1;
points.Add(point);
}
}
}
else
{
points.Add(point1);
if (otri2.triangle.infected)
{
osub.seg = this.subsegMap[otri2.triangle.hash];
if (this.SegmentsIntersect(osub.SegOrg(), osub.SegDest(), point1, point2, out point, true))
{
point.id = count + this.segIndex;
this.points[count + this.segIndex] = point;
this.segIndex = this.segIndex + 1;
points.Add(point);
}
}
}
otri2.Copy(ref otri);
otri2.OnextSelf();
}
else
{
if (!otri.triangle.infected)
{
points.Add(point1);
}
vertex2 = otri.Org();
vertex1 = otri.Apex();
point = new Point((vertex2.X + vertex1.X) / 2, (vertex2.Y + vertex1.Y) / 2)
{
id = count + this.segIndex
};
this.points[count + this.segIndex] = point;
this.segIndex = this.segIndex + 1;
points.Add(point);
break;
}
}while (!otri.Equal(otri1));
voronoiRegion.Add(points);
}
private void ConstructBvdCell(Vertex vertex)
{
Point point;
VoronoiRegion voronoiRegion = new VoronoiRegion(vertex);
this.regions.Add(voronoiRegion);
Otri otri = new Otri();
Otri otri1 = new Otri();
Otri otri2 = new Otri();
Osub item = new Osub();
Osub osub = new Osub();
int count = this.mesh.triangles.Count;
List <Point> points = new List <Point>();
vertex.tri.Copy(ref otri1);
if (otri1.Org() != vertex)
{
throw new Exception("ConstructBvdCell: inconsistent topology.");
}
otri1.Copy(ref otri);
otri1.Onext(ref otri2);
do
{
Point point1 = this.points[otri.triangle.id];
Point point2 = this.points[otri2.triangle.id];
if (otri.triangle.infected)
{
item.seg = this.subsegMap[otri.triangle.hash];
if (otri2.triangle.infected)
{
osub.seg = this.subsegMap[otri2.triangle.hash];
if (!item.Equal(osub))
{
if (this.SegmentsIntersect(item.SegOrg(), item.SegDest(), point1, point2, out point, true))
{
point.id = count + this.segIndex;
this.points[count + this.segIndex] = point;
this.segIndex = this.segIndex + 1;
points.Add(point);
}
if (this.SegmentsIntersect(osub.SegOrg(), osub.SegDest(), point1, point2, out point, true))
{
point.id = count + this.segIndex;
this.points[count + this.segIndex] = point;
this.segIndex = this.segIndex + 1;
points.Add(point);
}
}
}
else if (this.SegmentsIntersect(item.SegOrg(), item.SegDest(), point1, point2, out point, true))
{
point.id = count + this.segIndex;
this.points[count + this.segIndex] = point;
this.segIndex = this.segIndex + 1;
points.Add(point);
}
}
else
{
points.Add(point1);
if (otri2.triangle.infected)
{
osub.seg = this.subsegMap[otri2.triangle.hash];
if (this.SegmentsIntersect(osub.SegOrg(), osub.SegDest(), point1, point2, out point, true))
{
point.id = count + this.segIndex;
this.points[count + this.segIndex] = point;
this.segIndex = this.segIndex + 1;
points.Add(point);
}
}
}
otri2.Copy(ref otri);
otri2.OnextSelf();
}while (!otri.Equal(otri1));
voronoiRegion.Add(points);
}
public void TestTriangle(ref Otri testtri)
{
Vertex vertex;
Vertex vertex1;
double num;
double num1;
double num2;
Otri otri = new Otri();
Otri otri1 = new Otri();
Osub osub = new Osub();
Vertex vertex2 = testtri.Org();
Vertex vertex3 = testtri.Dest();
Vertex vertex4 = testtri.Apex();
double num3 = vertex2.x - vertex3.x;
double num4 = vertex2.y - vertex3.y;
double num5 = vertex3.x - vertex4.x;
double num6 = vertex3.y - vertex4.y;
double num7 = vertex4.x - vertex2.x;
double num8 = vertex4.y - vertex2.y;
double num9 = num3 * num3;
double num10 = num4 * num4;
double num11 = num5 * num5;
double num12 = num6 * num6;
double num13 = num8 * num8;
double num14 = num9 + num10;
double num15 = num11 + num12;
double num16 = num7 * num7 + num13;
if (num14 < num15 && num14 < num16)
{
num = num14;
num1 = num5 * num7 + num6 * num8;
num1 = num1 * num1 / (num15 * num16);
vertex = vertex2;
vertex1 = vertex3;
testtri.Copy(ref otri);
}
else if (num15 >= num16)
{
num = num16;
num1 = num3 * num5 + num4 * num6;
num1 = num1 * num1 / (num14 * num15);
vertex = vertex4;
vertex1 = vertex2;
testtri.Lprev(ref otri);
}
else
{
num = num15;
num1 = num3 * num7 + num4 * num8;
num1 = num1 * num1 / (num14 * num16);
vertex = vertex3;
vertex1 = vertex4;
testtri.Lnext(ref otri);
}
if (this.behavior.VarArea || this.behavior.fixedArea || this.behavior.Usertest)
{
double num17 = 0.5 * (num3 * num6 - num4 * num5);
if (this.behavior.fixedArea && num17 > this.behavior.MaxArea)
{
this.queue.Enqueue(ref testtri, num, vertex4, vertex2, vertex3);
return;
}
if (this.behavior.VarArea && num17 > testtri.triangle.area && testtri.triangle.area > 0)
{
this.queue.Enqueue(ref testtri, num, vertex4, vertex2, vertex3);
return;
}
if (this.behavior.Usertest && this.userTest != null && this.userTest(vertex2, vertex3, vertex4, num17))
{
this.queue.Enqueue(ref testtri, num, vertex4, vertex2, vertex3);
return;
}
}
if (num14 <= num15 || num14 <= num16)
{
num2 = (num15 <= num16 ? (num14 + num15 - num16) / (2 * Math.Sqrt(num14 * num15)) : (num14 + num16 - num15) / (2 * Math.Sqrt(num14 * num16)));
}
else
{
num2 = (num15 + num16 - num14) / (2 * Math.Sqrt(num15 * num16));
}
if (num1 > this.behavior.goodAngle || num2 < this.behavior.maxGoodAngle && this.behavior.MaxAngle != 0)
{
if (vertex.type == VertexType.SegmentVertex && vertex1.type == VertexType.SegmentVertex)
{
otri.SegPivot(ref osub);
if (osub.seg == Mesh.dummysub)
{
otri.Copy(ref otri1);
do
{
otri.OprevSelf();
otri.SegPivot(ref osub);
}while (osub.seg == Mesh.dummysub);
Vertex vertex5 = osub.SegOrg();
Vertex vertex6 = osub.SegDest();
do
{
otri1.DnextSelf();
otri1.SegPivot(ref osub);
}while (osub.seg == Mesh.dummysub);
Vertex vertex7 = osub.SegOrg();
Vertex vertex8 = osub.SegDest();
Vertex vertex9 = null;
if (vertex6.x == vertex7.x && vertex6.y == vertex7.y)
{
vertex9 = vertex6;
}
else if (vertex5.x == vertex8.x && vertex5.y == vertex8.y)
{
vertex9 = vertex5;
}
if (vertex9 != null)
{
double num18 = (vertex.x - vertex9.x) * (vertex.x - vertex9.x) + (vertex.y - vertex9.y) * (vertex.y - vertex9.y);
double num19 = (vertex1.x - vertex9.x) * (vertex1.x - vertex9.x) + (vertex1.y - vertex9.y) * (vertex1.y - vertex9.y);
if (num18 < 1.001 * num19 && num18 > 0.999 * num19)
{
return;
}
}
}
}
this.queue.Enqueue(ref testtri, num, vertex4, vertex2, vertex3);
}
}
