protected override void WorkConsumer(StdSharedPtr <UserDatum>[] datumsPtr)
{
try
{
// User's displaying/saving/other processing here
// datum.cvOutputData: rendered frame with pose or heatmaps
// datum.poseKeypoints: Array<float> with the estimated pose
if (datumsPtr != null && datumsPtr.Length != 0)
{
using (var cvOutputData = OpenPose.OP_OP2CVCONSTMAT(datumsPtr[0].Get().CvOutputData))
{
Cv.ImShow($"{OpenPose.OpenPoseNameAndVersion()} - Tutorial Thread API", cvOutputData);
// It displays the image and sleeps at least 1 ms (it usually sleeps ~5-10 msec to display the image)
Cv.WaitKey(1);
}
}
}
catch (Exception e)
{
OpenPose.Log("Some kind of unexpected error happened.");
this.Stop();
OpenPose.Error(e.Message, -1, nameof(this.WorkConsumer));
}
#endregion
}
private static int TutorialApiCpp()
{
try
{
OpenPose.Log("Starting OpenPose demo...", Priority.High);
using (var opTimer = OpenPose.GetTimerInit())
{
// OpenPose wrapper
OpenPose.Log("Configuring OpenPose...", Priority.High);
using (var opWrapper = new Wrapper <Datum>())
{
ConfigureWrapper(opWrapper);
// Start, run, and stop processing - exec() blocks this thread until OpenPose wrapper has finished
OpenPose.Log("Starting thread(s)...", Priority.High);
opWrapper.Exec();
}
// Measuring total time
OpenPose.PrintTime(opTimer, "OpenPose demo successfully finished. Total time: ", " seconds.", Priority.High);
}
// Return
return(0);
}
catch (Exception)
{
return(-1);
}
}
private static int TutorialAddModule1()
{
try
{
OpenPose.Log("Starting OpenPose demo...", Priority.High);
using (var opTimer = OpenPose.GetTimerInit())
{
// Configuring OpenPose
OpenPose.Log("Configuring OpenPose...", Priority.High);
using (var opWrapperT = new Wrapper <CustomDatum>())
{
ConfigureWrapper(opWrapperT);
OpenPose.Log("Starting thread(s)...", Priority.High);
// Start, run & stop threads - it blocks this thread until all others have finished
opWrapperT.Exec();
// Measuring total time
OpenPose.PrintTime(opTimer, "OpenPose demo successfully finished. Total time: ", " seconds.", Priority.High);
}
}
// Return successful message
return(0);
}
catch (Exception)
{
return(-1);
}
}
// starts detector
public override void Run(IProgress <DetectionResults> progress)
{
// detection loop - detects on each frame
while (!userWantsToExit) // setting userWantsToExit to true breaks this loop
{
// get latest detected frame from input, which we set during the config
if (opWrapper.WaitAndPop(out datumProcessed)) // detection data gets put into datumProcessed
{
if (datumProcessed != null && datumProcessed.TryGet(out data) && !data.Empty) // if datumProcessed exists && we can get the data sucessfully && retrieved data exists
{
Datum d = data.ToArray()[0].Get(); // retrieve datum object which contains the keypoint data
progress.Report(new DetectionResults() // report calculated keypoint data with DetectionResults object
{
data = d, // keypoint data
isFinished = false // are we finished with the detection
});
}
}
else // can't get next frame, so we end the detection loop
{
OpenPose.Log("Processed datum could not be emplaced.", Priority.High);
userWantsToExit = true;
break;
}
}
progress.Report(new DetectionResults() // when finished, we report with isFinished set to true
{
data = null,
isFinished = true
});
opWrapper.Dispose(); // dispose of openpose wrapper
}
public StdSharedPtr <StdVector <UserDatum> > CreateDatum()
{
// Close program when empty frame
if (this._Closed || this._ImageFiles.Length <= this._Counter)
{
OpenPose.Log("Last frame read and added to queue. Closing program after it is processed.", Priority.High);
// This funtion stops this worker, which will eventually stop the whole thread system once all the
// frames have been processed
this._Closed = true;
return(null);
}
else
{
// Create new datum
var tmp = new StdVector <UserDatum>();
tmp.EmplaceBack();
var datumsPtr = new StdSharedPtr <StdVector <UserDatum> >(tmp);
var datum = tmp.ToArray()[0];
// Fill datum
using (var mat = Cv.ImRead(this._ImageFiles[this._Counter++]))
datum.CvInputData = mat;
// If empty frame -> return nullptr
if (datum.CvInputData.Empty)
{
OpenPose.Log($"Empty frame detected on path: {this._ImageFiles[this._Counter - 1]}. Closing program.", Priority.High);
this._Closed = true;
datumsPtr = null;
}
return(datumsPtr);
}
}
private static int TutorialApiCpp()
{
try
{
OpenPose.Log("Starting OpenPose demo...", Priority.High);
using (var opTimer = OpenPose.GetTimerInit())
{
// Configuring OpenPose
OpenPose.Log("Configuring OpenPose...", Priority.High);
using (var opWrapper = new Wrapper <Datum>(ThreadManagerMode.AsynchronousOut))
{
ConfigureWrapper(opWrapper);
// Start, run, and stop processing - exec() blocks this thread until OpenPose wrapper has finished
OpenPose.Log("Starting thread(s)...", Priority.High);
opWrapper.Start();
// User processing
var userOutputClass = new UserOutputClass();
var userWantsToExit = false;
while (!userWantsToExit)
{
// Pop frame
if (opWrapper.WaitAndPop(out var datumProcessed))
{
if (!Flags.NoDisplay)
{
userWantsToExit = userOutputClass.Display(datumProcessed);
}
userOutputClass.PrintKeyPoints(datumProcessed);
datumProcessed.Dispose();
}
// If OpenPose finished reading images
else if (!opWrapper.IsRunning)
{
break;
}
// Something else happened
else
{
OpenPose.Log("Processed datum could not be emplaced.", Priority.High);
}
}
OpenPose.Log("Stopping thread(s)", Priority.High);
opWrapper.Stop();
// Measuring total time
OpenPose.PrintTime(opTimer, "OpenPose demo successfully finished. Total time: ", " seconds.", Priority.High);
}
}
// Return
return(0);
}
catch (Exception)
{
return(-1);
}
}
public void Log()
{
const string message = nameof(this.Log);
const string function = nameof(this.Log);
const string file = "OpenPoseTest.cs";
foreach (var priority in Enum.GetValues(typeof(Priority)).Cast <Priority>())
{
OpenPose.Log($"{message}", priority, -1, function, file);
}
}
private static int TutorialApiCpp()
{
try
{
OpenPose.Log("Starting OpenPose demo...", Priority.High);
using (var opTimer = OpenPose.GetTimerInit())
{
// Configuring OpenPose
OpenPose.Log("Configuring OpenPose...", Priority.High);
using (var opWrapper = new Wrapper <Datum>(ThreadManagerMode.AsynchronousIn))
{
ConfigureWrapper(opWrapper);
// Start, run, and stop processing - exec() blocks this thread until OpenPose wrapper has finished
OpenPose.Log("Starting thread(s)...", Priority.High);
opWrapper.Start();
// User processing
var userInputClass = new UserInputClass(Flags.ImageDir);
var userWantsToExit = false;
while (!userWantsToExit && !userInputClass.IsFinished())
{
// Push frame
using (var datumToProcess = userInputClass.CreateDatum())
{
if (datumToProcess != null)
{
var successfullyEmplaced = opWrapper.WaitAndEmplace(datumToProcess);
if (!successfullyEmplaced)
{
OpenPose.Log("Processed datum could not be emplaced.", Priority.High);
}
}
}
}
OpenPose.Log("Stopping thread(s)", Priority.High);
opWrapper.Stop();
}
// Measuring total time
OpenPose.PrintTime(opTimer, "OpenPose demo successfully finished. Total time: ", " seconds.", Priority.High);
}
// Return
return(0);
}
catch (Exception)
{
return(-1);
}
}
private Datum ProcessBitmap(Bitmap bmp)
{
BitmapData bmpData = null;
try
{
var width = bmp.Width;
var height = bmp.Height;
bmpData = bmp.LockBits(new Rectangle(0, 0, width, height), ImageLockMode.ReadOnly, PixelFormat.Format24bppRgb);
var stride = bmpData.Stride;
var scan0 = bmpData.Scan0;
unsafe
{
// convert bitmap to byte array
var line = width * 3;
var image = new byte[line * height];
var ps = (byte *)scan0;
for (var h = 0; h < height; h++)
{
Marshal.Copy((IntPtr)ps, image, line * h, line);
ps += stride;
}
// use openpose wrapper to calculate keypoints using byte array object as input image
this.datumProcessed = opWrapper.EmplaceAndPop(image, width, height, MatType.CV_8UC3);
if (this.datumProcessed != null) // if output data exists
{
if (this.datumProcessed != null && this.datumProcessed.TryGet(out this.data) && !this.data.Empty) // if datumProcessed exists && we can get the data sucessfully && retrieved data exists
{
return(this.data.ToArray()[0].Get()); // retrieve datum object which contains the keypoint data
}
else // bad input
{
OpenPose.Log("Image could not be processed.", Priority.High);
}
}
}
}
finally
{
if (bmpData != null)
{
bmp.UnlockBits(bmpData);
}
}
return(null);
}
public Datum ProcessFrame(Mat image) // gets result keypoints from OpenPoseDotNet.Mat
{
datumProcessed = opWrapper.EmplaceAndPop(image); // method detects on OpenPoseDotNet.Mat
if (datumProcessed != null && datumProcessed.TryGet(out data) && !data.Empty) // if datumProcessed exists && we can get the data sucessfully && retrieved data exists
{
Datum result = data.ToArray()[0].Get(); // retrieve datum object which contains the keypoint data
opWrapper.Dispose(); // dispose of wrapper after detection
return(result);
}
else
{
OpenPose.Log("Nullptr or empty datumsPtr found.", Priority.High);
return(null);
}
}
protected override StdSharedPtr <StdVector <StdSharedPtr <UserDatum> > > WorkProducer()
{
try
{
// Close program when empty frame
if (this._ImageFiles.Length <= this._Counter)
{
OpenPose.Log("Last frame read and added to queue. Closing program after it is processed.", Priority.High);
// This funtion stops this worker, which will eventually stop the whole thread system once all the
// frames have been processed
this.Stop();
return(null);
}
else
{
// Create new datum
var vector = new StdVector <StdSharedPtr <UserDatum> >();
var datumsPtr = new StdSharedPtr <StdVector <StdSharedPtr <UserDatum> > >(vector);
datumsPtr.Get().EmplaceBack();
var datum = datumsPtr.Get().At(0);
// C# cannot set pointer object by using assignment operator
datum.Reset(new UserDatum());
// Fill datum
using (var cvInputData = Cv.ImRead(this._ImageFiles[this._Counter++]))
using (var inputData = OpenPose.OP_CV2OPCONSTMAT(cvInputData))
datum.Get().CvInputData = inputData;
// If empty frame -> return nullptr
if (datum.Get().CvInputData.Empty)
{
OpenPose.Log($"Empty frame detected on path: {this._ImageFiles[this._Counter - 1]}. Closing program.", Priority.High);
this.Stop();
datumsPtr = null;
}
return(datumsPtr);
}
}
catch (Exception e)
{
OpenPose.Log("Some kind of unexpected error happened.");
this.Stop();
OpenPose.Error(e.Message, -1, nameof(this.WorkProducer));
return(null);
}
}
private static void PrintKeypoints(StdSharedPtr <StdVector <StdSharedPtr <Datum> > > datumsPtr)
{
try
{
// Example: How to use the pose keypoints
if (datumsPtr != null && datumsPtr.TryGet(out var data) && !data.Empty)
{
var temp = data.ToArray()[0].Get();
OpenPose.Log($"Body keypoints: {temp.PoseKeyPoints}", Priority.High);
OpenPose.Log($"Face keypoints: {temp.FaceKeyPoints}", Priority.High);
OpenPose.Log($"Left hand keypoints: {temp.HandKeyPoints[0]}", Priority.High);
OpenPose.Log($"Right hand keypoints: {temp.HandKeyPoints[1]}", Priority.High);
}
else
{
OpenPose.Log("Nullptr or empty datumsPtr found.", Priority.High);
}
}
protected override StdSharedPtr <StdVector <UserDatum> > WorkProducer()
{
try
{
// Close program when empty frame
if (this._ImageFiles.Length <= this._Counter)
{
OpenPose.Log("Last frame read and added to queue. Closing program after it is processed.", Priority.High);
// This funtion stops this worker, which will eventually stop the whole thread system once all the
// frames have been processed
this.Stop();
return(null);
}
else
{
// Create new datum
var tmp = new StdVector <UserDatum>();
tmp.EmplaceBack();
var datumsPtr = new StdSharedPtr <StdVector <UserDatum> >(tmp);
var datum = tmp.ToArray()[0];
// Fill datum
using (var mat = Cv.ImRead(this._ImageFiles[this._Counter++]))
datum.CvInputData = mat;
// If empty frame -> return nullptr
if (datum.CvInputData.Empty)
{
OpenPose.Log($"Empty frame detected on path: {this._ImageFiles[this._Counter - 1]}. Closing program.", Priority.High);
this.Stop();
datumsPtr = null;
}
return(datumsPtr);
}
}
catch (Exception e)
{
OpenPose.Log("Some kind of unexpected error happened.");
this.Stop();
OpenPose.Error(e.Message, -1, nameof(this.WorkProducer));
return(null);
}
}
private string filePath; // input file path
/*
* initializer for webcam input
* netRes = net resolution
* faceRes = face detector resolution, disable by setting to null
* handRes = hand detector resolution, disable by setting to null
* modelPose = which pose model to use
* filePath = image file path
* outPath = output path for frames, set null to disable output, disable by setting to null
*/
public ImageDetector(string netRes, string faceRes, string handRes, string modelPose, string filePath, string outPath)
{
this.filePath = filePath; // set image file path
// set logging level
OpenPose.Check(0 <= Flags.LoggingLevel && Flags.LoggingLevel <= 255, "Wrong logging_level value.");
ConfigureLog.PriorityThreshold = (Priority)Flags.LoggingLevel;
Profiler.SetDefaultX((ulong)Flags.ProfileSpeed);
OpenPose.Log("Adding config...", Priority.High);
InitFlags(netRes, faceRes, handRes, modelPose, outPath); // initialize flags with input values
opWrapper = new Wrapper <UserDatum>(ThreadManagerMode.Asynchronous);
// configure openpose wrapper obj based on the flags that we set
ConfigOnFlags(opWrapper,
false); // set input on config
}
protected override void Work(Datum[] datumsPtr)
{
// User's post-processing (after OpenPose processing & before OpenPose outputs) here
// datum.cvOutputData: rendered frame with pose or heatmaps
// datum.poseKeypoints: Array<float> with the estimated pose
try
{
if (datumsPtr != null && datumsPtr.Length != 0)
{
foreach (var datum in datumsPtr)
{
Cv.BitwiseNot(datum.CvInputData, datum.CvOutputData);
}
}
}
catch (Exception e)
{
OpenPose.Log("Some kind of unexpected error happened.");
this.Stop();
OpenPose.Error(e.Message, -1, nameof(this.Work));
}
}
private static bool Display(StdSharedPtr <StdVector <StdSharedPtr <Datum> > > datumsPtr)
{
try
{
// User's displaying/saving/other processing here
// datum.cvOutputData: rendered frame with pose or heatmaps
// datum.poseKeypoints: Array<float> with the estimated pose
if (datumsPtr != null && datumsPtr.TryGet(out var data) && !data.Empty)
{
// Display image and sleeps at least 1 ms (it usually sleeps ~5-10 msec to display the image)
var temp = data.ToArray()[0].Get();
using (var cvMat = OpenPose.OP_OP2CVCONSTMAT(temp.CvOutputData))
Cv.ImShow($"{OpenPose.OpenPoseNameAndVersion()} - Tutorial C++ API", cvMat);
}
else
{
OpenPose.Log("Nullptr or empty datumsPtr found.", Priority.High);
}
var key = Cv.WaitKey(1);
return(key == 27);
}
public StdSharedPtr <StdVector <StdSharedPtr <Datum> > > CreateDatum()
{
// Close program when empty frame
if (this._Closed || this._ImageFiles.Length <= this._Counter)
{
OpenPose.Log("Last frame read and added to queue. Closing program after it is processed.", Priority.High);
// This funtion stops this worker, which will eventually stop the whole thread system once all the
// frames have been processed
this._Closed = true;
return(null);
}
else
{
// Create new datum
var vector = new StdVector <StdSharedPtr <Datum> >();
var datumsPtr = new StdSharedPtr <StdVector <StdSharedPtr <Datum> > >(vector);
datumsPtr.Get().EmplaceBack();
var datum = datumsPtr.Get().At(0);
// C# cannot set pointer object by using assignment operator
datum.Reset(new Datum());
// Fill datum
using (var cvInputData = Cv.ImRead(this._ImageFiles[this._Counter++]))
using (var inputData = OpenPose.OP_CV2OPCONSTMAT(cvInputData))
datum.Get().CvInputData = inputData;
// If empty frame -> return nullptr
if (datum.Get().CvInputData.Empty)
{
OpenPose.Log($"Empty frame detected on path: {this._ImageFiles[this._Counter - 1]}. Closing program.", Priority.High);
this._Closed = true;
datumsPtr = null;
}
return(datumsPtr);
}
}
protected override void Work(Datum[] datumsPtr)
{
try
{
// User's processing here
// datum.cvInputData: initial cv::Mat obtained from the frames producer (video, webcam, etc.)
// datum.cvOutputData: final cv::Mat to be displayed
if (datumsPtr != null)
{
foreach (var datum in datumsPtr)
{
Cv.BitwiseNot(datum.CvInputData, datum.CvOutputData);
}
}
}
catch (Exception e)
{
OpenPose.Log("Some kind of unexpected error happened.");
this.Stop();
OpenPose.Error(e.Message, -1, nameof(this.Work));
}
}
protected override void Work(StdSharedPtr <Datum>[] datums)
{
try
{
// User's pre-processing (after OpenPose read the input image & before OpenPose processing) here
// datumPtr->cvInputData: input frame
if (datums != null && datums.Length != 0)
{
foreach (var datum in datums)
{
using (var cvOutputData = OpenPose.OP_OP2CVMAT(datum.Get().CvOutputData))
Cv.BitwiseNot(cvOutputData, cvOutputData);
}
}
}
catch (Exception e)
{
OpenPose.Log("Some kind of unexpected error happened.");
this.Stop();
OpenPose.Error(e.Message, -1, nameof(this.Work));
}
}
private static void Display(StdSharedPtr <StdVector <StdSharedPtr <Datum> > > datumsPtr)
{
try
{
// User's displaying/saving/other processing here
// datum.cvOutputData: rendered frame with pose or heatmaps
// datum.poseKeypoints: Array<float> with the estimated pose
if (datumsPtr != null && datumsPtr.TryGet(out var data) && !data.Empty)
{
// Display image
var temp = data.ToArray();
using (var cvMat = OpenPose.OP_OP2CVCONSTMAT(temp[0].Get().CvOutputData))
{
Cv.ImShow($"{OpenPose.OpenPoseNameAndVersion()} - Tutorial C++ API", cvMat);
Cv.WaitKey();
}
}
else
{
OpenPose.Log("Nullptr or empty datumsPtr found.", Priority.High);
}
}
protected override void Work(StdSharedPtr <Datum>[] datums)
{
try
{
// User's post-processing (after OpenPose processing & before OpenPose outputs) here
// datum.cvOutputData: rendered frame with pose or heatmaps
// datum.poseKeypoints: Array<float> with the estimated pose
if (datums != null && datums.Length != 0)
{
foreach (var datum in datums)
{
using (var cvOutputData = OpenPose.OP_OP2CVMAT(datum.Get().CvOutputData))
Cv.BitwiseNot(cvOutputData, cvOutputData);
}
}
}
catch (Exception e)
{
OpenPose.Log("Some kind of unexpected error happened.");
this.Stop();
OpenPose.Error(e.Message, -1, nameof(this.Work));
}
}
protected override void WorkConsumer(Datum[] datumsPtr)
{
try
{
// User's displaying/saving/other processing here
// datum.cvOutputData: rendered frame with pose or heatmaps
// datum.poseKeypoints: Array<float> with the estimated pose
if (datumsPtr != null && datumsPtr.Length != 0)
{
Cv.ImShow("User worker GUI", datumsPtr[0].CvOutputData);
// It displays the image and sleeps at least 1 ms (it usually sleeps ~5-10 msec to display the image)
Cv.WaitKey(1);
}
}
catch (Exception e)
{
OpenPose.Log("Some kind of unexpected error happened.");
this.Stop();
OpenPose.Error(e.Message, -1, nameof(this.WorkConsumer));
}
#endregion
}
private static int TutorialDeveloperThread1()
{
try
{
OpenPose.Log("Starting OpenPose demo...", Priority.High);
var timeBegin = new Stopwatch();
timeBegin.Start();
// ------------------------- INITIALIZATION -------------------------
// Step 1 - Set logging level
// - 0 will output all the logging messages
// - 255 will output nothing
OpenPose.Check(0 <= Flags.LoggingLevel && Flags.LoggingLevel <= 255, "Wrong logging_level value.");
ConfigureLog.PriorityThreshold = (Priority)Flags.LoggingLevel;
// Step 2 - Read GFlags (user defined configuration)
// cameraSize
var cameraSize = OpenPose.FlagsToPoint(Flags.CameraResolution, "-1x-1");
// outputSize
var outputSize = OpenPose.FlagsToPoint(Flags.OutputResolution, "-1x-1");
// producerType
var tie = OpenPose.FlagsToProducer(Flags.ImageDir, Flags.Video, Flags.IpCamera, Flags.Camera, Flags.FlirCamera, Flags.FlirCameraIndex);
var producerType = tie.Item1;
var producerString = tie.Item2;
var displayProducerFpsMode = Flags.ProcessRealTime ? ProducerFpsMode.OriginalFps : ProducerFpsMode.RetrievalFps;
using (var producerSharedPtr = OpenPose.CreateProducer(producerType,
cameraSize,
producerString,
Flags.CameraParameterPath,
Flags.FrameUndistort,
Flags.Views3D))
{
producerSharedPtr.Get().SetProducerFpsMode(displayProducerFpsMode);
OpenPose.Log("", Priority.Low);
// Step 3 - Setting producer
//var videoSeekSharedPtr = std::make_shared<std::pair<std::atomic<bool>, std::atomic<int>>>();
//videoSeekSharedPtr->first = false;
//videoSeekSharedPtr->second = 0;
// Step 4 - Setting thread workers && manager
// Note:
// nativeDebugging may occur crash
using (var threadManager = new ThreadManager <Datum>())
{
// Step 5 - Initializing the worker classes
// Frames producer (e.g., video, webcam, ...)
using (var datumProducer = new StdSharedPtr <DatumProducer <Datum> >(new DatumProducer <Datum>(producerSharedPtr)))
using (var wDatumProducer = new StdSharedPtr <WDatumProducer <Datum> >(new WDatumProducer <Datum>(datumProducer)))
{
// GUI (Display)
using (var gui = new StdSharedPtr <Gui>(new Gui(outputSize, Flags.FullScreen, threadManager.GetIsRunningSharedPtr())))
using (var wGui = new StdSharedPtr <WGui <Datum> >(new WGui <Datum>(gui)))
{
// ------------------------- CONFIGURING THREADING -------------------------
// In this simple multi-thread example, we will do the following:
// 3 (virtual) queues: 0, 1, 2
// 1 real queue: 1. The first and last queue ids (in this case 0 and 2) are not actual queues, but the
// beginning and end of the processing sequence
// 2 threads: 0, 1
// wDatumProducer will generate frames (there is no real queue 0) and push them on queue 1
// wGui will pop frames from queue 1 and process them (there is no real queue 2)
var threadId = 0UL;
var queueIn = 0UL;
var queueOut = 1UL;
threadManager.Add(threadId++, wDatumProducer, queueIn++, queueOut++); // Thread 0, queues 0 -> 1
threadManager.Add(threadId++, wGui, queueIn++, queueOut++); // Thread 1, queues 1 -> 2
// Equivalent single-thread version (option a)
// const auto threadId = 0ull;
// auto queueIn = 0ull;
// auto queueOut = 1ull;
// threadManager.add(threadId, wDatumProducer, queueIn++, queueOut++); // Thread 0, queues 0 -> 1
// threadManager.add(threadId, wGui, queueIn++, queueOut++); // Thread 0, queues 1 -> 2
// Equivalent single-thread version (option b)
// const auto threadId = 0ull;
// const auto queueIn = 0ull;
// const auto queueOut = 1ull;
// threadManager.add(threadId, {wDatumProducer, wGui}, queueIn, queueOut); // Thread 0, queues 0 -> 1
// ------------------------- STARTING AND STOPPING THREADING -------------------------
OpenPose.Log("Starting thread(s)...", Priority.High);
// Two different ways of running the program on multithread environment
// Option a) Using the main thread (this thread) for processing (it saves 1 thread, recommended)
threadManager.Exec();
// Option b) Giving to the user the control of this thread
// // VERY IMPORTANT NOTE: if OpenCV is compiled with Qt support, this option will not work. Qt needs the main
// // thread to plot visual results, so the final GUI (which uses OpenCV) would return an exception similar to:
// // `QMetaMethod::invoke: Unable to invoke methods with return values in queued connections`
// // Start threads
// threadManager.start();
// // Keep program alive while running threads. Here the user could perform any other desired function
// while (threadManager.isRunning())
// std::this_thread::sleep_for(std::chrono::milliseconds{33});
// // Stop and join threads
// op::log("Stopping thread(s)", op::Priority::High);
// threadManager.stop();
}
}
}
}
// ------------------------- CLOSING -------------------------
// Measuring total time
timeBegin.Stop();
var totalTimeSec = timeBegin.ElapsedMilliseconds / 1000d;
var message = $"OpenPose demo successfully finished. Total time: {totalTimeSec} seconds.";
OpenPose.Log(message, Priority.High);
// Return successful message
return(0);
}
catch (Exception e)
{
OpenPose.Error(e.Message, -1, nameof(TutorialDeveloperThread1));
return(-1);
}
}
private static int TutorialApiCpp9()
{
try
{
OpenPose.Log("Starting OpenPose demo...", Priority.High);
var timeBegin = new Stopwatch();
timeBegin.Start();
// logging_level
OpenPose.Check(0 <= Flags.LoggingLevel && Flags.LoggingLevel <= 255, "Wrong logging_level value.");
ConfigureLog.PriorityThreshold = (Priority)Flags.LoggingLevel;
Profiler.SetDefaultX((ulong)Flags.ProfileSpeed);
// Applying user defined configuration - GFlags to program variables
// outputSize
var outputSize = OpenPose.FlagsToPoint(Flags.OutputResolution, "-1x-1");
// netInputSize
var netInputSize = OpenPose.FlagsToPoint(Flags.NetResolution, "-1x368");
// faceNetInputSize
var faceNetInputSize = OpenPose.FlagsToPoint(Flags.FaceNetResolution, "368x368 (multiples of 16)");
// handNetInputSize
var handNetInputSize = OpenPose.FlagsToPoint(Flags.HandNetResolution, "368x368 (multiples of 16)");
// poseModel
var poseModel = OpenPose.FlagsToPoseModel(Flags.ModelPose);
// JSON saving
if (!string.IsNullOrEmpty(Flags.WriteKeyPoint))
{
OpenPose.Log("Flag `write_keypoint` is deprecated and will eventually be removed. Please, use `write_json` instead.", Priority.Max);
}
// keypointScale
var keypointScale = OpenPose.FlagsToScaleMode(Flags.KeyPointScale);
// heatmaps to add
var heatMapTypes = OpenPose.FlagsToHeatMaps(Flags.HeatmapsAddParts, Flags.HeatmapsAddBackground, Flags.HeatmapsAddPAFs);
var heatMapScale = OpenPose.FlagsToHeatMapScaleMode(Flags.HeatmapsScale);
// >1 camera view?
var multipleView = (Flags.Enable3D || Flags.Views3D > 1);
// Enabling Google Logging
const bool enableGoogleLogging = true;
// Initializing the user custom classes
// Frames producer (e.g., video, webcam, ...)
using (var wUserInput = new StdSharedPtr <UserWorkerProducer <UserDatum> >(new WUserInput(Flags.ImageDir)))
// Processing
using (var wUserPostProcessing = new StdSharedPtr <UserWorker <UserDatum> >(new WUserPostProcessing()))
// GUI (Display)
using (var wUserOutput = new StdSharedPtr <UserWorkerConsumer <UserDatum> >(new WUserOutput()))
{
// OpenPose wrapper
OpenPose.Log("Configuring OpenPose...", Priority.High);
using (var opWrapperT = new Wrapper <UserDatum>())
{
// Add custom input
const bool workerInputOnNewThread = false;
opWrapperT.SetWorker(WorkerType.Input, wUserInput, workerInputOnNewThread);
// Add custom processing
const bool workerProcessingOnNewThread = false;
opWrapperT.SetWorker(WorkerType.PostProcessing, wUserPostProcessing, workerProcessingOnNewThread);
// Add custom output
const bool workerOutputOnNewThread = true;
opWrapperT.SetWorker(WorkerType.Output, wUserOutput, workerOutputOnNewThread);
// Pose configuration (use WrapperStructPose{} for default and recommended configuration)
using (var pose = new WrapperStructPose(!Flags.BodyDisabled,
netInputSize,
outputSize,
keypointScale,
Flags.NumGpu,
Flags.NumGpuStart,
Flags.ScaleNumber,
(float)Flags.ScaleGap,
OpenPose.FlagsToRenderMode(Flags.RenderPose, multipleView),
poseModel,
!Flags.DisableBlending,
(float)Flags.AlphaPose,
(float)Flags.AlphaHeatmap,
Flags.PartToShow,
Flags.ModelFolder,
heatMapTypes,
heatMapScale,
Flags.PartCandidates,
(float)Flags.RenderThreshold,
Flags.NumberPeopleMax,
Flags.MaximizePositives,
Flags.FpsMax,
enableGoogleLogging))
// Face configuration (use op::WrapperStructFace{} to disable it)
using (var face = new WrapperStructFace(Flags.Face,
faceNetInputSize,
OpenPose.FlagsToRenderMode(Flags.FaceRender, multipleView, Flags.RenderPose),
(float)Flags.FaceAlphaPose,
(float)Flags.FaceAlphaHeatmap,
(float)Flags.FaceRenderThreshold))
// Hand configuration (use op::WrapperStructHand{} to disable it)
using (var hand = new WrapperStructHand(Flags.Hand,
handNetInputSize,
Flags.HandScaleNumber,
(float)Flags.HandScaleRange, Flags.HandTracking,
OpenPose.FlagsToRenderMode(Flags.HandRender, multipleView, Flags.RenderPose),
(float)Flags.HandAlphaPose,
(float)Flags.HandAlphaHeatmap,
(float)Flags.HandRenderThreshold))
// Extra functionality configuration (use op::WrapperStructExtra{} to disable it)
using (var extra = new WrapperStructExtra(Flags.Enable3D,
Flags.MinViews3D,
Flags.Identification,
Flags.Tracking,
Flags.IkThreads))
// Output (comment or use default argument to disable any output)
using (var output = new WrapperStructOutput(Flags.CliVerbose,
Flags.WriteKeyPoint,
OpenPose.StringToDataFormat(Flags.WriteKeyPointFormat),
Flags.WriteJson,
Flags.WriteCocoJson,
Flags.WriteCocoFootJson,
Flags.WriteCocoJsonVariant,
Flags.WriteImages,
Flags.WriteImagesFormat,
Flags.WriteVideo,
Flags.WriteVideoFps,
Flags.WriteHeatmaps,
Flags.WriteHeatmapsFormat,
Flags.WriteVideoAdam,
Flags.WriteBvh,
Flags.UdpHost,
Flags.UdpPort))
{
opWrapperT.Configure(pose);
opWrapperT.Configure(face);
opWrapperT.Configure(hand);
opWrapperT.Configure(extra);
opWrapperT.Configure(output);
// No GUI. Equivalent to: opWrapper.configure(op::WrapperStructGui{});
// Set to single-thread (for sequential processing and/or debugging and/or reducing latency)
if (Flags.DisableMultiThread)
{
opWrapperT.DisableMultiThreading();
}
// Start, run, and stop processing - exec() blocks this thread until OpenPose wrapper has finished
OpenPose.Log("Starting thread(s)...", Priority.High);
opWrapperT.Exec();
}
}
}
// Measuring total time
timeBegin.Stop();
var totalTimeSec = timeBegin.ElapsedMilliseconds / 1000d;
var message = $"OpenPose demo successfully finished. Total time: {totalTimeSec} seconds.";
OpenPose.Log(message, Priority.High);
// Return successful message
return(0);
}
catch (Exception)
{
return(-1);
}
}
private static int OpenPoseTutorialThread3()
{
try
{
OpenPose.Log("Starting OpenPose demo...", Priority.High);
var timeBegin = new Stopwatch();
timeBegin.Start();
// ------------------------- INITIALIZATION -------------------------
// Step 1 - Set logging level
// - 0 will output all the logging messages
// - 255 will output nothing
OpenPose.Check(0 <= Flags.LoggingLevel && Flags.LoggingLevel <= 255, "Wrong logging_level value.");
ConfigureLog.PriorityThreshold = (Priority)Flags.LoggingLevel;
// Step 2 - Setting thread workers && manage
using (var threadManager = new ThreadManager <Datum>())
{
// Step 3 - Initializing the worker classes
// Frames producer (e.g., video, webcam, ...)
using (var wUserInput = new StdSharedPtr <UserWorkerProducer <Datum> >(new WUserInput(Flags.ImageDir)))
{
// Processing
using (var wUserProcessing = new StdSharedPtr <UserWorker <Datum> >(new WUserPostProcessing()))
{
// GUI (Display)
using (var wUserOutput = new StdSharedPtr <UserWorkerConsumer <Datum> >(new WUserOutput()))
{
// ------------------------- CONFIGURING THREADING -------------------------
// In this simple multi-thread example, we will do the following:
// 3 (virtual) queues: 0, 1, 2
// 1 real queue: 1. The first and last queue ids (in this case 0 and 2) are not actual queues, but the
// beginning and end of the processing sequence
// 2 threads: 0, 1
// wUserInput will generate frames (there is no real queue 0) and push them on queue 1
// wGui will pop frames from queue 1 and process them (there is no real queue 2)
var threadId = 0UL;
var queueIn = 0UL;
var queueOut = 1UL;
threadManager.Add(threadId++, wUserInput, queueIn++, queueOut++); // Thread 0, queues 0 -> 1
threadManager.Add(threadId++, wUserProcessing, queueIn++, queueOut++); // Thread 1, queues 1 -> 2
threadManager.Add(threadId++, wUserOutput, queueIn++, queueOut++); // Thread 2, queues 2 -> 3
// ------------------------- STARTING AND STOPPING THREADING -------------------------
OpenPose.Log("Starting thread(s)...", Priority.High);
// Two different ways of running the program on multithread environment
// Option a) Using the main thread (this thread) for processing (it saves 1 thread, recommended)
threadManager.Exec();
// Option b) Giving to the user the control of this thread
// // VERY IMPORTANT NOTE: if OpenCV is compiled with Qt support, this option will not work. Qt needs the main
// // thread to plot visual results, so the final GUI (which uses OpenCV) would return an exception similar to:
// // `QMetaMethod::invoke: Unable to invoke methods with return values in queued connections`
// // Start threads
// threadManager.start();
// // Keep program alive while running threads. Here the user could perform any other desired function
// while (threadManager.isRunning())
// std::this_thread::sleep_for(std::chrono::milliseconds{33});
// // Stop and join threads
// op::log("Stopping thread(s)", op::Priority::High);
// threadManager.stop();
}
}
}
}
// ------------------------- CLOSING -------------------------
// Measuring total time
timeBegin.Stop();
var totalTimeSec = timeBegin.ElapsedMilliseconds / 1000d;
var message = $"OpenPose demo successfully finished. Total time: {totalTimeSec} seconds.";
OpenPose.Log(message, Priority.High);
// Return successful message
return(0);
}
catch (Exception e)
{
OpenPose.Error(e.Message, -1, nameof(OpenPoseTutorialThread3));
return(-1);
}
}
// configures openpose wrapper on set flags
// setInput - set to true if setting input during configuration (e.g. for video file input, image directory, webcam)
// set to false if inputting later (e.g. for emblaceandpop on Mat object or raw image)
public static void ConfigOnFlags(Wrapper <UserDatum> opWrapper, Boolean setInput)
{
// Configuring OpenPose
// logging_level
OpenPose.Check(0 <= Flags.LoggingLevel && Flags.LoggingLevel <= 255, "Wrong logging_level value.");
ConfigureLog.PriorityThreshold = (Priority)Flags.LoggingLevel;
Profiler.SetDefaultX((ulong)Flags.ProfileSpeed);
// Applying user defined configuration - GFlags to program variables
// producerType
var tie = OpenPose.FlagsToProducer(Flags.ImageDir, Flags.Video, Flags.IpCamera, Flags.Camera, Flags.FlirCamera, Flags.FlirCameraIndex);
var producerType = tie.Item1;
var producerString = tie.Item2;
// cameraSize
var cameraSize = OpenPose.FlagsToPoint(Flags.CameraResolution, "-1x-1");
// outputSize
var outputSize = OpenPose.FlagsToPoint(Flags.OutputResolution, "-1x-1");
// netInputSize
var netInputSize = OpenPose.FlagsToPoint(Flags.NetResolution, "-1x368");
// faceNetInputSize
var faceNetInputSize = OpenPose.FlagsToPoint(Flags.FaceNetResolution, "368x368 (multiples of 16)");
// handNetInputSize
var handNetInputSize = OpenPose.FlagsToPoint(Flags.HandNetResolution, "368x368 (multiples of 16)");
// poseMode
var poseMode = OpenPose.FlagsToPoseMode(Flags.Body);
// poseModel
var poseModel = OpenPose.FlagsToPoseModel(Flags.ModelPose);
// JSON saving
if (!string.IsNullOrEmpty(Flags.WriteKeyPoint))
{
OpenPose.Log("Flag `write_keypoint` is deprecated and will eventually be removed. Please, use `write_json` instead.", Priority.Max);
}
// keyPointScale
var keyPointScale = OpenPose.FlagsToScaleMode(Flags.KeyPointScale);
// heatmaps to add
var heatMapTypes = OpenPose.FlagsToHeatMaps(Flags.HeatmapsAddParts, Flags.HeatmapsAddBackground, Flags.HeatmapsAddPAFs);
var heatMapScale = OpenPose.FlagsToHeatMapScaleMode(Flags.HeatmapsScale);
// >1 camera view?
var multipleView = (Flags.Enable3D || Flags.Views3D > 1 || Flags.FlirCamera);
// Face and hand detectors
var faceDetector = OpenPose.FlagsToDetector(Flags.FaceDetector);
var handDetector = OpenPose.FlagsToDetector(Flags.HandDetector);
// Enabling Google Logging
const bool enableGoogleLogging = true;
// Pose configuration (use WrapperStructPose() for default and recommended configuration)
var pose = new WrapperStructPose(poseMode,
netInputSize,
outputSize,
keyPointScale,
Flags.NumGpu,
Flags.NumGpuStart,
Flags.ScaleNumber,
(float)Flags.ScaleGap,
OpenPose.FlagsToRenderMode(Flags.RenderPose, multipleView),
poseModel,
!Flags.DisableBlending,
(float)Flags.AlphaPose,
(float)Flags.AlphaHeatmap,
Flags.PartToShow,
Flags.ModelFolder,
heatMapTypes,
heatMapScale,
Flags.PartCandidates,
(float)Flags.RenderThreshold,
Flags.NumberPeopleMax,
Flags.MaximizePositives,
Flags.FpsMax,
Flags.PrototxtPath,
Flags.CaffeModelPath,
(float)Flags.UpsamplingRatio,
enableGoogleLogging);
// Face configuration (use WrapperStructPose() to disable it)
var face = new WrapperStructFace(Flags.Face,
faceDetector,
faceNetInputSize,
OpenPose.FlagsToRenderMode(Flags.FaceRender, multipleView, Flags.RenderPose),
(float)Flags.FaceAlphaPose,
(float)Flags.FaceAlphaHeatmap,
(float)Flags.FaceRenderThreshold);
// Hand configuration (use WrapperStructPose() to disable it)
var hand = new WrapperStructHand(Flags.Hand,
handDetector,
handNetInputSize,
Flags.HandScaleNumber,
(float)Flags.HandScaleRange,
OpenPose.FlagsToRenderMode(Flags.HandRender, multipleView, Flags.RenderPose),
(float)Flags.HandAlphaPose,
(float)Flags.HandAlphaHeatmap,
(float)Flags.HandRenderThreshold);
// Extra functionality configuration (use WrapperStructPose() to disable it)
var extra = new WrapperStructExtra(Flags.Enable3D,
Flags.MinViews3D,
Flags.Identification,
Flags.Tracking,
Flags.IkThreads);
// Output (comment or use default argument to disable any output)
var output = new WrapperStructOutput(Flags.CliVerbose,
Flags.WriteKeyPoint,
OpenPose.StringToDataFormat(Flags.WriteKeyPointFormat),
Flags.WriteJson,
Flags.WriteCocoJson,
Flags.WriteCocoFootJson,
Flags.WriteCocoJsonVariant,
Flags.WriteImages,
Flags.WriteImagesFormat,
Flags.WriteVideo,
Flags.WriteVideoWithAudio,
Flags.WriteVideoFps,
Flags.WriteHeatmaps,
Flags.WriteHeatmapsFormat,
Flags.WriteVideoAdam,
Flags.WriteBvh,
Flags.UdpHost,
Flags.UdpPort);
// GUI (comment or use default argument to disable any visual output)
var gui = new WrapperStructGui(OpenPose.FlagsToDisplayMode(Flags.Display, Flags.Enable3D),
!Flags.NoGuiVerbose,
Flags.FullScreen);
// config wrapper on set values
opWrapper.Configure(pose);
opWrapper.Configure(face);
opWrapper.Configure(hand);
opWrapper.Configure(extra);
if (setInput)
{
// Producer (use default to disable any input)
var input = new WrapperStructInput(producerType,
producerString,
Flags.FrameFirst,
Flags.FrameStep,
Flags.FrameLast,
Flags.ProcessRealTime,
Flags.FrameFlip,
Flags.FrameRotate,
Flags.FramesRepeat,
cameraSize,
Flags.CameraParameterPath,
Flags.FrameUndistort,
Flags.Views3D);
opWrapper.Configure(input);
}
opWrapper.Configure(output);
// Set to single-thread (for sequential processing and/or debugging and/or reducing latency)
if (Flags.DisableMultiThread)
{
opWrapper.DisableMultiThreading();
}
// start openpose wrapper
opWrapper.Start();
}
private static bool Display(StdSharedPtr <StdVector <StdSharedPtr <Datum> > > datumsPtr, int desiredChannel = 0)
{
try
{
if (datumsPtr != null && datumsPtr.TryGet(out var data) && !data.Empty)
{
var datum = datumsPtr.Get().At(0).Get();
// Note: Heatmaps are in net_resolution size, which does not necessarily match the final image size
// Read heatmaps
var poseHeatMaps = datum.PoseHeatMaps;
// Read desired channel
var numberChannels = poseHeatMaps.GetSize(0);
var height = poseHeatMaps.GetSize(1);
var width = poseHeatMaps.GetSize(2);
var eleSize = sizeof(float);
using (var desiredChannelHeatMap = new Mat(height, width, MatType.CV_32F, IntPtr.Add(poseHeatMaps.GetPtr(), (desiredChannel % numberChannels) * height * width * eleSize)))
{
// Read image used from OpenPose body network (same resolution than heatmaps)
var inputNetData = datum.InputNetData[0];
using (var inputNetDataB = new Mat(height, width, MatType.CV_32F, IntPtr.Add(inputNetData.GetPtr(), 0 * height * width * eleSize)))
using (var inputNetDataG = new Mat(height, width, MatType.CV_32F, IntPtr.Add(inputNetData.GetPtr(), 1 * height * width * eleSize)))
using (var inputNetDataR = new Mat(height, width, MatType.CV_32F, IntPtr.Add(inputNetData.GetPtr(), 2 * height * width * eleSize)))
using (var vector = new StdVector <Mat>(new List <Mat>(new[] { inputNetDataB, inputNetDataG, inputNetDataR })))
using (var tmp = new Mat())
{
Cv.Merge(vector, tmp);
using (var add = tmp + 0.5)
using (var mul = add * 255)
using (var netInputImage = (Mat)mul)
{
// Turn into uint8 Cv.Mat
using (var netInputImageUint8 = new Mat())
{
netInputImage.ConvertTo(netInputImageUint8, MatType.CV_8UC1);
using (var desiredChannelHeatMapUint8 = new Mat())
{
desiredChannelHeatMap.ConvertTo(desiredChannelHeatMapUint8, MatType.CV_8UC1);
// Combining both images
using (var imageToRender = new Mat())
{
Cv.ApplyColorMap(desiredChannelHeatMapUint8, desiredChannelHeatMapUint8, ColormapType.COLORMAP_JET);
Cv.AddWeighted(netInputImageUint8, 0.5, desiredChannelHeatMapUint8, 0.5, 0d, imageToRender);
// Display image
Cv.ImShow($"{OpenPose.OpenPoseNameAndVersion()} - Tutorial C++ API", imageToRender);
}
}
}
}
}
}
}
else
{
OpenPose.Log("Nullptr or empty datumsPtr found.", Priority.High);
}
var key = (char)Cv.WaitKey(1);
return(key == 27);
}
protected override void WorkConsumer(StdSharedPtr <UserDatum>[] datumsPtr)
{
try
{
// User's displaying/saving/other processing here
// datum.cvOutputData: rendered frame with pose or heatmaps
// datum.poseKeypoints: Array<float> with the estimated pose
if (datumsPtr != null && datumsPtr.Length != 0)
{
var datum = datumsPtr[0].Get();
// Show in command line the resulting pose keypoints for body, face and hands
OpenPose.Log("\nKeypoints:");
// Accesing each element of the keypoints
var poseKeypoints = datum.PoseKeyPoints;
OpenPose.Log("Person pose keypoints:");
for (var person = 0; person < poseKeypoints.GetSize(0); person++)
{
OpenPose.Log($"Person {person} (x, y, score):");
for (var bodyPart = 0; bodyPart < poseKeypoints.GetSize(1); bodyPart++)
{
var valueToPrint = "";
for (var xyscore = 0; xyscore < poseKeypoints.GetSize(2); xyscore++)
{
valueToPrint += poseKeypoints[new[] { person, bodyPart, xyscore }] + " ";
}
OpenPose.Log(valueToPrint);
}
}
OpenPose.Log(" ");
// Alternative: just getting std::string equivalent
OpenPose.Log($"Face keypoints: {datum.FaceKeyPoints}");
OpenPose.Log($"Left hand keypoints: {datum.HandKeyPoints[0]}");
OpenPose.Log($"Right hand keypoints: {datum.HandKeyPoints[1]}");
// Heatmaps
var poseHeatMaps = datum.PoseHeatMaps;
if (!poseHeatMaps.Empty)
{
OpenPose.Log($"Pose heatmaps size: [{poseHeatMaps.GetSize(0)}, {poseHeatMaps.GetSize(1)}, {poseHeatMaps.GetSize(2)}]");
var faceHeatMaps = datum.FaceHeatMaps;
OpenPose.Log($"Face heatmaps size: [{faceHeatMaps.GetSize(0)}, {faceHeatMaps.GetSize(1)}, {faceHeatMaps.GetSize(2)}, {faceHeatMaps.GetSize(3)}]");
var handHeatMaps = datum.HandHeatMaps;
OpenPose.Log($"Left hand heatmaps size: [{handHeatMaps[0].GetSize(0)}, {handHeatMaps[0].GetSize(1)}, {handHeatMaps[0].GetSize(2)}, {handHeatMaps[0].GetSize(3)}]");
OpenPose.Log($"Right hand heatmaps size: [{handHeatMaps[1].GetSize(0)}, {handHeatMaps[1].GetSize(1)}, {handHeatMaps[1].GetSize(2)}, {handHeatMaps[1].GetSize(3)}]");
}
// Display results (if enabled)
if (!Flags.NoDisplay)
{
using (var cvMat = OpenPose.OP_OP2CVCONSTMAT(datum.CvOutputData))
{
// Display rendered output image
Cv.ImShow($"{OpenPose.OpenPoseNameAndVersion()} - Tutorial C++ API", cvMat);
// Display image and sleeps at least 1 ms (it usually sleeps ~5-10 msec to display the image)
var key = (char)Cv.WaitKey(1);
if (key == 27)
{
this.Stop();
}
}
}
}
}
catch (Exception e)
{
this.Stop();
OpenPose.Error(e.Message, -1, nameof(this.WorkConsumer));
}
}
private static void ConfigureWrapper(Wrapper <Datum> opWrapper)
{
try
{
// Configuring OpenPose
// logging_level
OpenPose.CheckBool(0 <= Flags.LoggingLevel && Flags.LoggingLevel <= 255, "Wrong logging_level value.");
ConfigureLog.PriorityThreshold = (Priority)Flags.LoggingLevel;
Profiler.SetDefaultX((ulong)Flags.ProfileSpeed);
// Applying user defined configuration - GFlags to program variables
// outputSize
var outputSize = OpenPose.FlagsToPoint(Flags.OutputResolution, "-1x-1");
// netInputSize
var netInputSize = OpenPose.FlagsToPoint(Flags.NetResolution, "-1x368");
// faceNetInputSize
var faceNetInputSize = OpenPose.FlagsToPoint(Flags.FaceNetResolution, "368x368 (multiples of 16)");
// handNetInputSize
var handNetInputSize = OpenPose.FlagsToPoint(Flags.HandNetResolution, "368x368 (multiples of 16)");
// poseMode
var poseMode = OpenPose.FlagsToPoseMode(Flags.Body);
// poseModel
var poseModel = OpenPose.FlagsToPoseModel(Flags.ModelPose);
// JSON saving
if (!string.IsNullOrEmpty(Flags.WriteKeyPoint))
{
OpenPose.Log("Flag `write_keypoint` is deprecated and will eventually be removed. Please, use `write_json` instead.", Priority.Max);
}
// keypointScale
var keypointScale = OpenPose.FlagsToScaleMode(Flags.KeyPointScale);
// heatmaps to add
var heatMapTypes = OpenPose.FlagsToHeatMaps(Flags.HeatmapsAddParts, Flags.HeatmapsAddBackground, Flags.HeatmapsAddPAFs);
var heatMapScale = OpenPose.FlagsToHeatMapScaleMode(Flags.HeatmapsScale);
// >1 camera view?
var multipleView = (Flags.Enable3D || Flags.Views3D > 1);
// Face and hand detectors
var faceDetector = OpenPose.FlagsToDetector(Flags.FaceDetector);
var handDetector = OpenPose.FlagsToDetector(Flags.HandDetector);
// Enabling Google Logging
const bool enableGoogleLogging = true;
// Pose configuration (use WrapperStructPose{} for default and recommended configuration)
var pose = new WrapperStructPose(poseMode,
netInputSize,
outputSize,
keypointScale,
Flags.NumGpu,
Flags.NumGpuStart,
Flags.ScaleNumber,
(float)Flags.ScaleGap,
OpenPose.FlagsToRenderMode(Flags.RenderPose, multipleView),
poseModel,
!Flags.DisableBlending,
(float)Flags.AlphaPose,
(float)Flags.AlphaHeatmap,
Flags.PartToShow,
Flags.ModelFolder,
heatMapTypes,
heatMapScale,
Flags.PartCandidates,
(float)Flags.RenderThreshold,
Flags.NumberPeopleMax,
Flags.MaximizePositives,
Flags.FpsMax,
Flags.PrototxtPath,
Flags.CaffeModelPath,
(float)Flags.UpsamplingRatio,
enableGoogleLogging);
// Face configuration (use op::WrapperStructFace{} to disable it)
var face = new WrapperStructFace(Flags.Face,
faceDetector,
faceNetInputSize,
OpenPose.FlagsToRenderMode(Flags.FaceRender, multipleView, Flags.RenderPose),
(float)Flags.FaceAlphaPose,
(float)Flags.FaceAlphaHeatmap,
(float)Flags.FaceRenderThreshold);
// Hand configuration (use op::WrapperStructHand{} to disable it)
var hand = new WrapperStructHand(Flags.Hand,
handDetector,
handNetInputSize,
Flags.HandScaleNumber,
(float)Flags.HandScaleRange,
OpenPose.FlagsToRenderMode(Flags.HandRender, multipleView, Flags.RenderPose),
(float)Flags.HandAlphaPose,
(float)Flags.HandAlphaHeatmap,
(float)Flags.HandRenderThreshold);
// Extra functionality configuration (use op::WrapperStructExtra{} to disable it)
var extra = new WrapperStructExtra(Flags.Enable3D,
Flags.MinViews3D,
Flags.Identification,
Flags.Tracking,
Flags.IkThreads);
// Output (comment or use default argument to disable any output)
var output = new WrapperStructOutput(Flags.CliVerbose,
Flags.WriteKeyPoint,
OpenPose.StringToDataFormat(Flags.WriteKeyPointFormat),
Flags.WriteJson,
Flags.WriteCocoJson,
Flags.WriteCocoJsonVariants,
Flags.WriteCocoJsonVariant,
Flags.WriteImages,
Flags.WriteImagesFormat,
Flags.WriteVideo,
Flags.WriteVideoFps,
Flags.WriteVideoWithAudio,
Flags.WriteHeatmaps,
Flags.WriteHeatmapsFormat,
Flags.WriteVideoAdam,
Flags.WriteBvh,
Flags.UdpHost,
Flags.UdpPort);
opWrapper.Configure(pose);
opWrapper.Configure(face);
opWrapper.Configure(hand);
opWrapper.Configure(extra);
opWrapper.Configure(output);
// No GUI. Equivalent to: opWrapper.configure(op::WrapperStructGui{});
// Set to single-thread (for sequential processing and/or debugging and/or reducing latency)
if (Flags.DisableMultiThread)
{
opWrapper.DisableMultiThreading();
}
// Return successful message
OpenPose.Log("Stopping OpenPose...", Priority.High);
}
catch (Exception e)
{
OpenPose.Error(e.Message, -1, nameof(ConfigureWrapper));
}
}
private static int OpenPoseDemo()
{
try
{
OpenPose.Log("Starting OpenPose demo...", Priority.High);
var timer = new Stopwatch();
timer.Start();
// logging_level
OpenPose.Check(0 <= Flags.LoggingLevel && Flags.LoggingLevel <= 255, "Wrong logging_level value.");
ConfigureLog.PriorityThreshold = (Priority)Flags.LoggingLevel;
Profiler.SetDefaultX((ulong)Flags.ProfileSpeed);
// // For debugging
// // Print all logging messages
// op::ConfigureLog::setPriorityThreshold(op::Priority::None);
// // Print out speed values faster
// op::Profiler::setDefaultX(100);
// Applying user defined configuration - GFlags to program variables
// cameraSize
var cameraSize = OpenPose.FlagsToPoint(Flags.CameraResolution, "-1x-1");
// outputSize
var outputSize = OpenPose.FlagsToPoint(Flags.OutputResolution, "-1x-1");
// netInputSize
var netInputSize = OpenPose.FlagsToPoint(Flags.NetResolution, "-1x368");
// faceNetInputSize
var faceNetInputSize = OpenPose.FlagsToPoint(Flags.FaceNetResolution, "368x368 (multiples of 16)");
// handNetInputSize
var handNetInputSize = OpenPose.FlagsToPoint(Flags.HandNetResolution, "368x368 (multiples of 16)");
// producerType
var tie = OpenPose.FlagsToProducer(Flags.ImageDir, Flags.Video, Flags.IpCamera, Flags.Camera, Flags.FlirCamera, Flags.FlirCameraIndex);
var producerType = tie.Item1;
var producerString = tie.Item2;
// poseModel
var poseModel = OpenPose.FlagsToPoseModel(Flags.ModelPose);
// JSON saving
if (!string.IsNullOrEmpty(Flags.WriteKeyPoint))
{
OpenPose.Log("Flag `write_keypoint` is deprecated and will eventually be removed. Please, use `write_json` instead.", Priority.Max);
}
// keyPointScale
var keyPointScale = OpenPose.FlagsToScaleMode(Flags.KeyPointScale);
// heatmaps to add
var heatMapTypes = OpenPose.FlagsToHeatMaps(Flags.HeatmapsAddParts, Flags.HeatmapsAddBackground, Flags.HeatmapsAddPAFs);
var heatMapScale = OpenPose.FlagsToHeatMapScaleMode(Flags.HeatmapsScale);
// >1 camera view?
var multipleView = (Flags.Enable3D || Flags.Views3D > 1 || Flags.FlirCamera);
// Enabling Google Logging
const bool enableGoogleLogging = true;
// Configuring OpenPose
OpenPose.Log("Configuring OpenPose...", Priority.High);
using (var opWrapper = new Wrapper())
{
// Pose configuration (use WrapperStructPose{} for default and recommended configuration)
using (var pose = new WrapperStructPose(!Flags.BodyDisabled,
netInputSize,
outputSize,
keyPointScale,
Flags.NumGpu,
Flags.NumGpuStart,
Flags.ScaleNumber,
(float)Flags.ScaleGap,
OpenPose.FlagsToRenderMode(Flags.RenderPose, multipleView),
poseModel,
!Flags.DisableBlending,
(float)Flags.AlphaPose,
(float)Flags.AlphaHeatmap,
Flags.PartToShow,
Flags.ModelFolder,
heatMapTypes,
heatMapScale,
Flags.PartCandidates,
(float)Flags.RenderThreshold,
Flags.NumberPeopleMax,
Flags.MaximizePositives,
Flags.FpsMax,
enableGoogleLogging))
// Face configuration (use op::WrapperStructFace{} to disable it)
using (var face = new WrapperStructFace(Flags.Face,
faceNetInputSize,
OpenPose.FlagsToRenderMode(Flags.FaceRender, multipleView, Flags.RenderPose),
(float)Flags.FaceAlphaPose,
(float)Flags.FaceAlphaHeatmap,
(float)Flags.FaceRenderThreshold))
// Hand configuration (use op::WrapperStructHand{} to disable it)
using (var hand = new WrapperStructHand(Flags.Hand,
handNetInputSize,
Flags.HandScaleNumber,
(float)Flags.HandScaleRange, Flags.HandTracking,
OpenPose.FlagsToRenderMode(Flags.HandRender, multipleView, Flags.RenderPose),
(float)Flags.HandAlphaPose,
(float)Flags.HandAlphaHeatmap,
(float)Flags.HandRenderThreshold))
// Extra functionality configuration (use op::WrapperStructExtra{} to disable it)
using (var extra = new WrapperStructExtra(Flags.Enable3D,
Flags.MinViews3D,
Flags.Identification,
Flags.Tracking,
Flags.IkThreads))
// Producer (use default to disable any input)
using (var input = new WrapperStructInput(producerType,
producerString,
Flags.FrameFirst,
Flags.FrameStep,
Flags.FrameLast,
Flags.ProcessRealTime,
Flags.FrameFlip,
Flags.FrameRotate,
Flags.FramesRepeat,
cameraSize,
Flags.CameraParameterFolder,
!Flags.FrameKeepDistortion,
(uint)Flags.Views3D))
// Output (comment or use default argument to disable any output)
using (var output = new WrapperStructOutput(Flags.CliVerbose,
Flags.WriteKeyPoint,
OpenPose.StringToDataFormat(Flags.WriteKeyPointFormat),
Flags.WriteJson,
Flags.WriteCocoJson,
Flags.WriteCocoFootJson,
Flags.WriteCocoJsonVariant,
Flags.WriteImages,
Flags.WriteImagesFormat,
Flags.WriteVideo,
Flags.WriteVideoFps,
Flags.WriteHeatmaps,
Flags.WriteHeatmapsFormat,
Flags.WriteVideoAdam,
Flags.WriteBvh,
Flags.UdpHost,
Flags.UdpPort))
// GUI (comment or use default argument to disable any visual output)
using (var gui = new WrapperStructGui(OpenPose.FlagsToDisplayMode(Flags.Display, Flags.Enable3D),
!Flags.NoGuiVerbose,
Flags.FullScreen))
{
opWrapper.Configure(pose);
opWrapper.Configure(face);
opWrapper.Configure(hand);
opWrapper.Configure(extra);
opWrapper.Configure(input);
opWrapper.Configure(output);
opWrapper.Configure(gui);
// Set to single-thread (for sequential processing and/or debugging and/or reducing latency)
if (Flags.DisableMultiThread)
{
opWrapper.DisableMultiThreading();
}
// Start, run, and stop processing - exec() blocks this thread until OpenPose wrapper has finished
OpenPose.Log("Starting thread(s)...", Priority.High);
opWrapper.Exec();
// Measuring total time
timer.Stop();
var totalTimeSec = timer.ElapsedMilliseconds * 1000;
var message = $"OpenPose demo successfully finished. Total time: {totalTimeSec} seconds.";
OpenPose.Log(message, Priority.High);
}
}
// Return successful message
OpenPose.Log("Stopping OpenPose...", Priority.High);
return(0);
}
catch (Exception e)
{
Console.WriteLine(e);
return(-1);
}
}
