protected override void ioParameterStatusChanged(bool input, int index, NodeParameterStatusChange status)
{
switch (index)
{
case (int)Params.throttle:
if (image != null)
{
if (status == NodeParameterStatusChange.ParameterArkAdded ||
status == NodeParameterStatusChange.ParameterArkRemoved)
{
bool st = isInputDefaulting(imageParams[Params.throttle].paramIndex);
image.sensitizeThrottleDialog(st);
}
else if (status == NodeParameterStatusChange.ParameterValueChanged ||
status == NodeParameterStatusChange.PatemeterSetValueChanged)
{
double t;
getThrottle(out t);
image.updateThrottleDialog(t);
}
}
break;
case (int)Params.recenable:
case (int)Params.recfile:
case (int)Params.recformat:
case (int)Params.recresolution:
case (int)Params.recaspect:
if (image != null)
{
// This used to say isRecFileInputSet() instead of TRUE
// but it always worked because isRecFileInputSet always returns
// the wrong value. Nowdays, we only want to revisit the sensitivity
// of the dialogs, not the sensitivity of the command anyway.
image.sensitizePrintImageDialog(true);
image.sensitizeSaveImageDialog(true);
}
break;
case (int)Params.backgroundColor:
if (image != null)
{
if ((long)(status & NodeParameterStatusChange.ParameterArkAdded) > 0 ||
(long)(status & NodeParameterStatusChange.ParameterArkRemoved) > 0)
{
image.sensitizeBackgroundColorDialog(!IsBGColorConnected);
}
else if ((long)(status & NodeParameterStatusChange.ParameterValueChanged) > 0 ||
(long)(status & NodeParameterStatusChange.PatemeterSetValueChanged) > 0)
{
String color;
getBackgroundColor(out color);
image.updateBGColorDialog(color);
}
}
break;
case (int)Params.aaenabled:
if (image != null)
image.setAutoAxesDialogEnable();
break;
case (int)Params.aalabel:
if (image != null)
image.setAutoAxesDialogLabels();
break;
case (int)Params.aatick:
if (image != null)
image.setAutoAxesDialogTicks();
break;
case (int)Params.aaxticklocs:
if (image != null)
image.setAutoAxesDialogXTickLocs();
break;
case (int)Params.aayticklocs:
if (image != null)
image.setAutoAxesDialogYTickLocs();
break;
case (int)Params.aazticklocs:
if (image != null)
image.setAutoAxesDialogZTickLocs();
break;
case (int)Params.aaxticklabels:
if (image != null)
image.setAutoAxesDialogXTickLabels();
break;
case (int)Params.aayticklabels:
if (image != null)
image.setAutoAxesDialogYTickLabels();
break;
case (int)Params.aazticklabels:
if (image != null)
image.setAutoAxesDialogZTickLabels();
break;
case (int)Params.aacorners:
if (image != null)
image.setAutoAxesDialogCorners();
break;
case (int)Params.aaframe:
if (image != null)
image.setAutoAxesDialogFrame();
break;
case (int)Params.aaadjust:
if (image != null)
image.setAutoAxesDialogAdjust();
break;
case (int)Params.aacursor:
if (image != null)
image.setAutoAxesDialogCursor();
break;
case (int)Params.aagrid:
if (image != null)
image.setAutoAxesDialogGrid();
break;
case (int)Params.aacolor:
if (image != null)
image.setAutoAxesDialogAnnotationColors();
break;
case (int)Params.aaannotation:
if (image != null)
image.setAutoAxesDialogAnnotationColors();
break;
case (int)Params.aalabelscale:
if (image != null)
image.setAutoAxesDialogLabelScale();
break;
case (int)Params.aafont:
if(image != null)
image.setAutoAxesDialogFont();
break;
case (int)Params.interactionmode:
if (image != null)
{
bool stat = IsInteractionModeConnected;
image.sensitizeViewControl(!stat);
}
break;
case (int)Params.imageName:
if (image != null)
{
bool stat = isInputConnected(imageParams[Params.imageName].paramIndex);
if ((!stat) && (isInputDefaulting(imageParams[Params.imageName].paramIndex)))
setTitle(null);
else
setTitle(getInputValueString(imageParams[Params.imageName].paramIndex));
image.sensitizeChangeImageName(!stat);
}
break;
case (int)Params.render_mode:
if (image != null)
{
if (status == NodeParameterStatusChange.ParameterArkAdded)
image.sensitizeRenderMode(false);
else if (status == NodeParameterStatusChange.ParameterArkRemoved)
image.sensitizeRenderMode(true);
else if ((long)(status & (NodeParameterStatusChange.ParameterValueChanged |
NodeParameterStatusChange.PatemeterSetValueChanged)) > 0)
image.updateRenderingOptionsDialog();
}
break;
case (int)Params.button_up_approx:
if (image != null)
{
if (status == NodeParameterStatusChange.ParameterArkAdded)
image.sensitizeButtonUpApprox(false);
else if (status == NodeParameterStatusChange.ParameterArkRemoved)
image.sensitizeButtonUpApprox(true);
else if ((long)(status & (NodeParameterStatusChange.ParameterValueChanged |
NodeParameterStatusChange.PatemeterSetValueChanged)) > 0)
image.updateRenderingOptionsDialog();
}
break;
case (int)Params.button_down_approx:
if (image != null)
{
if (status == NodeParameterStatusChange.ParameterArkAdded)
image.sensitizeButtonDownApprox(false);
else if (status == NodeParameterStatusChange.ParameterArkRemoved)
image.sensitizeButtonDownApprox(true);
else if ((long)(status & (NodeParameterStatusChange.ParameterValueChanged |
NodeParameterStatusChange.PatemeterSetValueChanged)) > 0)
image.updateRenderingOptionsDialog();
}
break;
case (int)Params.button_up_density:
if (image != null)
{
if (status == NodeParameterStatusChange.ParameterArkAdded)
image.sensitizeButtonUpDensity(false);
else if (status == NodeParameterStatusChange.ParameterArkRemoved)
image.sensitizeButtonUpDensity(true);
else if ((long)(status & (NodeParameterStatusChange.ParameterValueChanged |
NodeParameterStatusChange.PatemeterSetValueChanged)) > 0)
image.updateRenderingOptionsDialog();
}
break;
case (int)Params.button_down_density:
if (image != null)
{
if (status == NodeParameterStatusChange.ParameterArkAdded)
image.sensitizeButtonDownDensity(false);
else if (status == NodeParameterStatusChange.ParameterArkRemoved)
image.sensitizeButtonDownDensity(true);
else if ((long)(status & (NodeParameterStatusChange.ParameterValueChanged |
NodeParameterStatusChange.PatemeterSetValueChanged)) > 0)
image.updateRenderingOptionsDialog();
}
break;
default:
break;
}
base.ioParameterStatusChanged(input, index, status);
}
/// <summary>
/// Notify anybody that needs to know that a parameter has changed its arcs.
/// At this class level, we just check changes in output arcs that may
/// change the label associated with the Interactor. If it may have
/// changed the label, then we notify all instances with
/// notifyVisualsOfStateChange().
/// </summary>
/// <param name="input"></param>
/// <param name="index"></param>
/// <param name="status"></param>
///
protected override void ioParameterStatusChanged(bool input, int index,
NodeParameterStatusChange status)
{
bool doit = false;
deferVisualNotification();
if ((int)(status & NodeParameterStatusChange.ParameterArkChanged) > 0)
{
if (input)
{
if (index == getLabelParameterIndex())
doit = true;
// If we become un data driven, then we must make sure the
// outputs get sent on the next execution.
if (!IsDataDriven)
{
for (int i = 1; i <= OutputCount; i++)
setOutputDirty(i);
// Don't need to send them because the network will get marked
// dirty as a result of an arc change.
}
}
else
{
int narcs = 0;
// Count the number of output arcs.
for (int i = 1; i <= OutputCount; i++)
{
List<Ark> arcs = getOutputArks(i);
narcs += arcs.Count;
}
// If the number of arcs has changed in such a way that the label
// may have to change then notify the instances to reset their
// labels.
// Labels can change if we ADD an arc and change from having...
// a) 0 to having 1 arc
// b) 1 to having 2 arcs
// or we REMOVE an arc and we change from having...
// a) 1 to having 0 arcs
// b) 2 to having 1 arc
bool added = (status == NodeParameterStatusChange.ParameterArkAdded);
if ((narcs <= 1) || (added && narcs == 2))
doit = true;
}
if (doit)
notifyVisualsOfStateChange();
}
base.ioParameterStatusChanged(input, index, status);
undeferVisualNotification();
}
/// <summary>
/// A node that has its first parameter set or its last parameter unset
/// must mark the network dirty so that is resent with/without the module
/// in the network.
/// </summary>
/// <param name="input"></param>
/// <param name="index"></param>
/// <param name="status"></param>
protected override void ioParameterStatusChanged(bool input, int index,
NodeParameterStatusChange status)
{
if (input && isInputViewable(index))
{
int icnt = InputCount;
int connections, settabs, i;
bool became_non_dd = false;
if ((status & NodeParameterStatusChange.ParameterValueChanged) > 0 &&
(status != NodeParameterStatusChange.PatemeterSetValueChanged))
{
for (connections = 0, settabs = 0, i = 1; connections == 0 && settabs < 2 && i <= icnt;
i++)
{
if (isInputViewable(i))
{
if (isInputConnected(i))
connections++;
else if (!isInputDefaulting(i))
settabs++;
}
}
if (connections != 0 && (settabs < 2))
{
// Either a parameter was just given a set value or just
// set to the default value. If just set to the default value
// and the number of set tabs is now 0 then the user just made
// the last tab up so mark the network dirty. If just given a
// set value and it is the only (first) parameter with a set
// value then mark the network dirty.
if (settabs == 0 &&
status == NodeParameterStatusChange.ParameterSetValueToDefaulting)
{
//Tool went from data-driven to non-data-driven.
became_non_dd = true;
}
else if (settabs == 1 && !isInputDefaulting(index))
{
// Tool went from non-data-driven to data-driven
getNetwork().setDirty();
}
}
}
if (became_non_dd)
{
getNetwork().setDirty();
}
}
base.ioParameterStatusChanged(input, index, status);
}
/// <summary>
/// If either of the list inputs has changed, we must determine the size
/// of the smaller of the two lists and reset this->optionCount to that
/// value.
/// NOTE: If this routine is being called, then one of the values must
/// have a set value (even though both are allowed not too).
/// </summary>
/// <param name="input"></param>
/// <param name="index"></param>
/// <param name="status"></param>
protected override void ioParameterStatusChanged(bool input, int index, NodeParameterStatusChange status)
{
throw new Exception("Not Yet Implemented");
base.ioParameterStatusChanged(input, index, status);
}
/// <summary>
/// notifyIo is the same as io sort of. notifyIo adds a check to see
/// if the network is in the process of going away. That avoids useless work.
/// </summary>
/// <param name="input"></param>
/// <param name="index"></param>
/// <param name="status"></param>
protected void notifyIoParameterStatusChanged(bool input, int index,
NodeParameterStatusChange status)
{
if (!network.IsDeleted)
ioParameterStatusChanged(input, index, status);
}
/// <summary>
/// Notify anybody that needs to know that a parameter has changed its
/// value or arcs.
/// </summary>
/// <param name="input"></param>
/// <param name="index"></param>
/// <param name="status"></param>
protected virtual void ioParameterStatusChanged(bool input, int index,
NodeParameterStatusChange status)
{
// If we have Configuration Dialog, let it know the value, arc or
// visibility was changed.
if (cdb != null)
{
if (input)
cdb.changeInput(index);
else
cdb.changeOutput(index);
}
// Now notify all nodes receiving this output that the value has changed.
if (!input && ((long)(status & NodeParameterStatusChange.ParameterValueChanged) > 0))
{
foreach (Ark a in getOutputArks(index))
{
int in_index = 0;
Node n = a.getDestinationNode(out in_index);
n.notifyIoParameterStatusChanged(true, in_index, status);
}
}
// Let the standin know about this. We don't notify StandIns about
// arc changes since they are the ones that generate them.
if (standin != null && ((long)(status & NodeParameterStatusChange.ParameterArkChanged) == 0))
standin.ioStatusChange(index, !input, status);
// Tell the network that it has changed.
// If this is an input and the tool is in a macro, then we must always
// resend the macro defnition because input values are contained within
// the macro definition. Otherwise we only need to mark the network
// dirty if an arc has changed.
if (input && network.IsMacro)
network.setDirty();
else
{
if ((long)(status & NodeParameterStatusChange.ParameterArkChanged) > 0)
network.setDirty();
else
network.setFileDirty();
}
}
