public void TestAddCustomIconTool()
{
string TestName = System.Reflection.MethodBase.GetCurrentMethod().Name;
string path_Test = Path.Combine(testcreatepath, TestName);
string path_Mga = Path.Combine(path_Test, TestName + ".mga");
// delete any previous test results
if (Directory.Exists(path_Test))
{
Directory.Delete(path_Test, true);
}
// create a new blank project
MgaProject proj = new MgaProject();
proj.Create("MGA=" + path_Mga, "CyPhyML");
// these are the actual steps of the test
proj.PerformInTransaction(delegate
{
// create the environment for the Component authoring class
CyPhy.RootFolder rf = CyPhyClasses.RootFolder.GetRootFolder(proj);
CyPhy.Components components = CyPhyClasses.Components.Create(rf);
CyPhy.Component testcomp = CyPhyClasses.Component.Create(components);
// new instance of the class to test
CyPhyComponentAuthoring.Modules.CustomIconAdd CATModule = new CyPhyComponentAuthoring.Modules.CustomIconAdd();
//// these class variables need to be set to avoid NULL references
CATModule.SetCurrentDesignElement(testcomp);
CATModule.CurrentObj = testcomp.Impl as MgaFCO;
// call the primary function directly
CATModule.AddCustomIcon(testiconpath);
// verify results
// 1. insure the icon file was copied to the back-end folder correctly
string iconAbsolutePath = Path.Combine(testcomp.GetDirectoryPath(ComponentLibraryManager.PathConvention.ABSOLUTE), "Icon.png");
Assert.True(File.Exists(iconAbsolutePath),
String.Format("Could not find the source file for the created resource, got {0}", iconAbsolutePath));
// 2. insure the resource path was created correctly
var iconResource = testcomp.Children.ResourceCollection.Where(p => p.Name == "Icon.png").First();
Assert.True(iconResource.Attributes.Path == "Icon.png",
String.Format("{0} Resource should have had value {1}; instead found {2}", iconResource.Name, "Icon.png", iconResource.Attributes.Path)
);
// 3. Verify the registry entry exists
string expected_registry_entry = Path.Combine(testcomp.GetDirectoryPath(ComponentLibraryManager.PathConvention.REL_TO_PROJ_ROOT), "Icon.png");
string registry_entry = (testcomp.Impl as GME.MGA.IMgaFCO).get_RegistryValue("icon");
Assert.True(registry_entry.Equals(expected_registry_entry),
String.Format("Registry should have had value {0}; instead found {1}", expected_registry_entry, registry_entry)
);
});
proj.Save();
proj.Close();
Directory.Delete(testcreatepath, true);
}
public void TestAddMfgModelTool()
{
string TestName = System.Reflection.MethodBase.GetCurrentMethod().Name;
string path_Test = Path.Combine(testcreatepath, TestName);
string path_Mga = Path.Combine(path_Test, TestName + ".mga");
// delete any previous test results
if (Directory.Exists(path_Test))
{
Directory.Delete(path_Test, true);
}
// create a new blank project
MgaProject proj = new MgaProject();
proj.Create("MGA=" + path_Mga, "CyPhyML");
// these are the actual steps of the test
proj.PerformInTransaction(delegate
{
// create the environment for the Component authoring class
CyPhy.RootFolder rf = CyPhyClasses.RootFolder.GetRootFolder(proj);
CyPhy.Components components = CyPhyClasses.Components.Create(rf);
CyPhy.Component testcomp = CyPhyClasses.Component.Create(components);
// new instance of the class to test
CyPhyComponentAuthoring.Modules.MfgModelImport CATModule = new CyPhyComponentAuthoring.Modules.MfgModelImport();
//// these class variables need to be set to avoid NULL references
CATModule.SetCurrentDesignElement(testcomp);
CATModule.CurrentObj = testcomp.Impl as MgaFCO;
// call the primary function directly
CATModule.import_manufacturing_model(testmfgmdlpath);
// verify results
// 1. insure the mfg file was copied to the backend folder correctly
// insure the part file was copied to the backend folder correctly
var getmfgmdl = testcomp.Children.ManufacturingModelCollection.First();
string returnedpath;
getmfgmdl.TryGetResourcePath(out returnedpath, ComponentLibraryManager.PathConvention.ABSOLUTE);
string demanglepathpath = returnedpath.Replace("\\", "/");
Assert.True(File.Exists(demanglepathpath),
String.Format("Could not find the source file for the created resource, got {0}", demanglepathpath));
// 2. insure the resource path was created correctly
var mfgResource = testcomp.Children.ResourceCollection.Where(p => p.Name == "generic_cots_mfg.xml").First();
Assert.True(mfgResource.Attributes.Path == Path.Combine("Manufacturing", "generic_cots_mfg.xml"),
String.Format("{0} Resource should have had value {1}; instead found {2}", mfgResource.Name, "generic_cots_mfg.xml", mfgResource.Attributes.Path)
);
});
proj.Save();
proj.Close();
}
public void TestCADImportResourceNaming()
{
string TestName = System.Reflection.MethodBase.GetCurrentMethod().Name;
string path_Test = Path.Combine(testcreatepath, TestName);
string path_Mga = Path.Combine(path_Test, TestName + ".mga");
// delete any previous test results
if (Directory.Exists(path_Test))
{
Directory.Delete(path_Test, true);
}
// create a new blank project
MgaProject proj = new MgaProject();
proj.Create("MGA=" + path_Mga, "CyPhyML");
// these are the actual steps of the test
proj.PerformInTransaction(delegate
{
// create the environment for the Component authoring class
CyPhy.RootFolder rf = CyPhyClasses.RootFolder.GetRootFolder(proj);
CyPhy.Components components = CyPhyClasses.Components.Create(rf);
CyPhy.Component testcomp = CyPhyClasses.Component.Create(components);
// new instance of the class to test
CyPhyComponentAuthoring.Modules.CADModelImport testcam = new CyPhyComponentAuthoring.Modules.CADModelImport();
// these class variables need to be set to avoid NULL references
testcam.SetCurrentDesignElement(testcomp);
testcam.CurrentObj = testcomp.Impl as MgaFCO;
// call the module with a part file to skip the CREO steps
testcam.ImportCADModel(testpartpath);
// verify results
// insure the resource path was created correctly
var correct_name = testcomp.Children.ResourceCollection.Where(p => p.Name == "damper.prt").First();
Assert.True(correct_name.Attributes.Path == "CAD\\damper.prt",
String.Format("{0} should have had value {1}; instead found {2}", correct_name.Name, "CAD\\damper.prt", correct_name.Attributes.Path)
);
// insure the part file was copied to the back-end folder correctly
var getcadmdl = testcomp.Children.CADModelCollection.First();
string returnedpath;
getcadmdl.TryGetResourcePath(out returnedpath, ComponentLibraryManager.PathConvention.ABSOLUTE);
Assert.True(File.Exists(returnedpath + ".36"),
String.Format("Could not find the source file for the created resource, got {0}", returnedpath));
});
proj.Save();
proj.Close();
}
public void DesignPackageImport()
{
// Clean the test directory
var pathTest = Path.Combine(META.VersionInfo.MetaPath,
"test",
"InterchangeTest",
"DesignInterchangeTest",
"ImportTestUnits",
"Package");
foreach (var path in Directory.EnumerateDirectories(pathTest))
{
Directory.Delete(path, true);
}
foreach (var path in Directory.EnumerateFiles(pathTest, "*.*"))
{
if (!path.Contains("NestedFolders.adp"))
{
File.Delete(path);
}
}
// Create a test project
var proj = new MgaProject();
proj.Create("MGA=" + Path.Combine(pathTest,"testmodel.mga"), "CyPhyML");
try
{
String pathCA = null;
proj.PerformInTransaction(() =>
{
// Instantiate the importer and import the package
var importer = new AVMDesignImporter(GMEConsole.CreateFromProject(proj), proj);
var mdlCA = importer.ImportFile(Path.Combine(pathTest, "NestedFolders.adp"), AVMDesignImporter.DesignImportMode.CREATE_CAS);
var ca = CyPhyClasses.ComponentAssembly.Cast(mdlCA.Impl);
pathCA = ca.GetDirectoryPath(ComponentLibraryManager.PathConvention.ABSOLUTE);
});
// Check the design's backend folder for all files except for the ADM.
var filesExpected = new List<String>
{
"testObject.txt",
"dir1/testObject.txt",
"dir1/dir1a/testObject.txt",
"dir2/testObject.txt"
};
var filesInDir = Directory.GetFiles(pathCA, "*.*", SearchOption.AllDirectories);
Assert.Equal(filesExpected.Count(), filesInDir.Count());
foreach (var file in filesExpected)
{
String fullPath = Path.Combine(pathCA, file);
Assert.True(File.Exists(fullPath));
}
}
finally
{
proj.Save();
proj.Close();
}
}
public void DesignPackageImport()
{
// Clean the test directory
var pathTest = Path.Combine(META.VersionInfo.MetaPath,
"test",
"InterchangeTest",
"DesignInterchangeTest",
"ImportTestUnits",
"Package");
foreach (var path in Directory.EnumerateDirectories(pathTest))
{
Directory.Delete(path, true);
}
foreach (var path in Directory.EnumerateFiles(pathTest, "*.*"))
{
if (!path.Contains("NestedFolders.adp"))
{
File.Delete(path);
}
}
// Create a test project
var proj = new MgaProject();
proj.Create("MGA=" + Path.Combine(pathTest, "testmodel.mga"), "CyPhyML");
try
{
String pathCA = null;
proj.PerformInTransaction(() =>
{
// Instantiate the importer and import the package
var importer = new AVMDesignImporter(GMEConsole.CreateFromProject(proj), proj);
var mdlCA = importer.ImportFile(Path.Combine(pathTest, "NestedFolders.adp"), AVMDesignImporter.DesignImportMode.CREATE_CAS);
var ca = CyPhyClasses.ComponentAssembly.Cast(mdlCA.Impl);
pathCA = ca.GetDirectoryPath(ComponentLibraryManager.PathConvention.ABSOLUTE);
});
// Check the design's backend folder for all files except for the ADM.
var filesExpected = new List <String>
{
"testObject.txt",
"dir1/testObject.txt",
"dir1/dir1a/testObject.txt",
"dir2/testObject.txt"
};
var filesInDir = Directory.GetFiles(pathCA, "*.*", SearchOption.AllDirectories);
Assert.Equal(filesExpected.Count(), filesInDir.Count());
foreach (var file in filesExpected)
{
String fullPath = Path.Combine(pathCA, file);
Assert.True(File.Exists(fullPath));
}
}
finally
{
proj.Save();
proj.Close();
}
}
public void TestCADFileReNaming()
{
// delete any previous test results
if (Directory.Exists(testcreatepath))
{
Directory.Delete(testcreatepath, true);
}
// create a new blank project
MgaProject proj = new MgaProject();
proj.Create("MGA=" + testMGApath, "CyPhyML");
// these are the actual steps of the test
proj.PerformInTransaction(delegate
{
// create the environment for the Component authoring class
CyPhy.RootFolder rf = CyPhyClasses.RootFolder.GetRootFolder(proj);
CyPhy.Components components = CyPhyClasses.Components.Create(rf);
CyPhy.Component testcomp = CyPhyClasses.Component.Create(components);
// Import a CAD file into the test project
CyPhyComponentAuthoring.Modules.CADModelImport importcam = new CyPhyComponentAuthoring.Modules.CADModelImport();
// these class variables need to be set to avoid NULL references
importcam.SetCurrentComp(testcomp);
importcam.CurrentProj = proj;
importcam.CurrentObj = testcomp.Impl as MgaFCO;
// import the CAD file
importcam.ImportCADModel(testpartpath);
// Get a path to the imported Cad file
var getcadmdl = testcomp.Children.CADModelCollection.First();
string importedpath;
getcadmdl.TryGetResourcePath(out importedpath, ComponentLibraryManager.PathConvention.ABSOLUTE);
// add in Creo version number
importedpath += Path.GetExtension(testpartpath);
// Rename the CAD file
CyPhyComponentAuthoring.Modules.CADFileRename renamecam = new CyPhyComponentAuthoring.Modules.CADFileRename();
// these class variables need to be set to avoid NULL references
renamecam.SetCurrentComp(testcomp);
renamecam.CurrentProj = proj;
renamecam.CurrentObj = testcomp.Impl as MgaFCO;
// call the module with a part file and the new file name
renamecam.RenameCADFile(importedpath, RenamedFileNameWithoutExtension);
// verify results
// 1. Verify the file was renamed
var renamecadmdl = testcomp.Children.CADModelCollection.First();
string renamedpath;
renamecadmdl.TryGetResourcePath(out renamedpath, ComponentLibraryManager.PathConvention.ABSOLUTE);
// add in Creo version
renamedpath += ".1";
Assert.True(File.Exists(renamedpath),
String.Format("Could not find the renamed CAD file, found {0}", renamedpath));
// 2. Verify the Model was renamed
bool model_not_found = false;
try
{
var model_name = testcomp.Children.CADModelCollection.Where(p => p.Name == RenamedFileName).First();
}
catch (Exception ex)
{
model_not_found = true;
}
Assert.False(model_not_found,
String.Format("No CAD model found with the renamed name {0}", RenamedFileName)
);
// 3. Verify the resource name and path were changed
CyPhy.Resource resource_name = null;
bool resource_not_found = false;
try
{
resource_name = testcomp.Children.ResourceCollection.Where(p => p.Name == RenamedFileName).First();
}
catch (Exception ex)
{
resource_not_found = true;
}
Assert.False(resource_not_found,
String.Format("No resource found with the renamed name {0}", RenamedFileName)
);
Assert.True(resource_name.Attributes.Path == RenamedFileNameRelativePath,
String.Format("{0} should have had value {1}; instead found {2}", resource_name.Name, RenamedFileNameRelativePath, resource_name.Attributes.Path)
);
});
proj.Save();
proj.Close();
}