protected Section ConstructReportSection(INCCTestDataSection section, MeasOptionSelector moskey, Detector det)
{
INCCTestDataStyle sec = null;
try
{
switch (section)
{
case INCCTestDataSection.CyclesWithMultiplicityDistributions:
sec = new INCCTestDataStyle(null, 0, INCCStyleSection.ReportSection.MultiColumn);
//Singles 1st Scaler 2nd Scaler Reals + Accidentals Accidentals
int[] crdwidths = new int[] { 10, 10, 10, 10, 10 };
int[] srawidths = new int[] { 12, 12 };
foreach (Cycle cyc in meas.Cycles)
{
// if no results on the cycle, these map indexers throw
if (cyc.CountingAnalysisResults.GetResultsCount(typeof(Multiplicity)) > 0) // if no results on the cycle, these map indexers throw
{
MultiplicityCountingRes mcr = (MultiplicityCountingRes)cyc.CountingAnalysisResults[moskey.MultiplicityParams];
sec.AddColumnRow(
new ulong[] { (ulong)mcr.Totals, (ulong)mcr.Scaler1.v, (ulong)mcr.Scaler2.v, (ulong)mcr.RASum, (ulong)mcr.ASum },
crdwidths);
int minbin, maxbin;
minbin = Math.Min(mcr.RAMult.Length, mcr.NormedAMult.Length);
maxbin = Math.Max(mcr.RAMult.Length, mcr.NormedAMult.Length);
sec.AddOne(maxbin);
for (int i = 0; i < minbin; i++)
{
sec.AddColumnRow(new ulong[] { mcr.RAMult[i], mcr.NormedAMult[i] }, srawidths);
}
for (int i = minbin; i < maxbin; i++) // check for uneven column
{
ulong[] potential = new ulong[2];
if (i < mcr.RAMult.Length)
{
potential[0] = mcr.RAMult[i];
}
if (i < mcr.NormedAMult.Length)
{
potential[1] = mcr.NormedAMult[i];
}
sec.AddColumnRow(potential, srawidths);
}
}
}
break;
default:
break;
}
}
catch (Exception e)
{
ctrllog.TraceException(e);
}
return(sec);
}
public void GenerateReport(Measurement m)
{
if (N.App.Opstate.IsAbortRequested) // handle stop, cancel, abort here, for stop does it roll back all report gen from here?
{
return;
}
IEnumerator iter = m.INCCAnalysisResults.GetMeasSelectorResultsEnumerator();
while (iter.MoveNext())
{
MeasOptionSelector moskey = (MeasOptionSelector)iter.Current;
// create one results for each SR key
StartReportGeneration(m, m.MeasOption.PrintName() + " INCC " +
(m.INCCAnalysisResults.Count > 1 ? "[" + moskey.MultiplicityParams.ShortName() + "] " : ""), // add an identifying signature to each file name if more than one active virtual SR
' ', "dat"); // make these text files with .dat suffix
//Detector det = meas.Detectors.GetIt(moskey.SRParams);
// now assuming only one detector on the list, so can use [0]
Detector det = meas.Detectors[0];
try
{
sections.Add(ConstructReportSection(INCCTestDataSection.CycleSummary, det, moskey));
sections.Add(ConstructReportSection(INCCTestDataSection.CyclesWithMultiplicityDistributions, moskey, det));
sections.RemoveAll(s => (s == null));
// copy all section rows to the report row list (t.rows)
int rowcount = 0;
foreach (Section sec in sections)
{
rowcount += sec.Count;
}
Array.Resize(ref t.rows, rowcount);
int idx = 0;
foreach (Section sec in sections)
{
Array.Copy(sec.ToArray(), 0, t.rows, idx, sec.Count); idx += sec.Count;
}
}
catch (Exception e)
{
ctrllog.TraceException(e);
}
FinishReportGeneration();
}
}
internal static unsafe iresultsbase MovePrecision(INCCResults ir, MeasOptionSelector mos)
{
results_precision_rec res = new results_precision_rec();
INCCResult results;
bool found = ir.TryGetValue(mos, out results);
if (found)
{
INCCResults.results_precision_rec t = (INCCResults.results_precision_rec)results;
StatePack(t.pass, res.prec_pass_fail);
res.chi_sq_lower_limit = t.chiSqLowerLimit;
res.chi_sq_upper_limit = t.chiSqUpperLimit;
res.prec_chi_sq = t.precChiSq;
res.prec_sample_var = t.precSampleVar;
res.prec_theoretical_var = t.precTheoreticalVar;
}
return res;
}
internal static unsafe iresultsbase MoveKnownM(INCCAnalysisState ias, MeasOptionSelector mos)
{
results_known_m_rec res = new results_known_m_rec();
INCCMethodResult result;
bool found = ias.Results.TryGetMethodResults(mos.MultiplicityParams, ias.Methods.selector, AnalysisMethod.KnownM, out result);
if (found)
{
INCCMethodResults.results_known_m_rec m = (INCCMethodResults.results_known_m_rec)result;
res.km_mult = m.mult;
res.km_alpha = m.alpha;
res.km_pu239e_mass = m.pu239e_mass;
res.km_pu240e_mass = m.pu240e_mass.v;
res.km_pu240e_mass_err = m.pu240e_mass.err;
res.km_pu_mass = m.pu_mass.v;
res.km_pu_mass_err = m.pu_mass.err;
res.km_dcl_pu240e_mass = m.dcl_pu240e_mass;
res.km_dcl_minus_asy_pu_mass = m.dcl_minus_asy_pu_mass.v;
res.km_dcl_minus_asy_pu_mass_err = m.dcl_minus_asy_pu_mass.err;
res.km_dcl_minus_asy_pu_mass_pct = m.dcl_minus_asy_pu_mass_pct;
StatePack(m.pass, res.km_pass_fail);
res.km_sf_rate_res = m.methodParams.sf_rate;
res.km_vs1_res = m.methodParams.vs1;
res.km_vs2_res = m.methodParams.vs2;
res.km_vi1_res = m.methodParams.vi1;
res.km_vi2_res = m.methodParams.vi2;
res.km_b_res = m.methodParams.b;
res.km_c_res = m.methodParams.c;
res.km_sigma_x_res = m.methodParams.sigma_x;
StrToBytes(INCC.MAX_DETECTOR_ID_LENGTH, ias.Methods.selector.detectorid, res.km_known_m_detector_id);
StrToBytes(INCC.MAX_ITEM_TYPE_LENGTH, ias.Methods.selector.material, res.km_known_m_item_type);
}
return res;
}
internal static unsafe iresultsbase MoveInitSrc(INCCResults ir, MeasOptionSelector mos)
{
results_init_src_rec res = new results_init_src_rec();
INCCResult results;
bool found = ir.TryGetValue(mos, out results);
if (found)
{
INCCResults.results_init_src_rec t = (INCCResults.results_init_src_rec)results;
res.init_src_mode = NewToOldBiasTestId(t.mode);
StatePack(t.pass, res.init_src_pass_fail);
StrToBytes(INCC.SOURCE_ID_LENGTH,t.init_src_id, res.init_src_id);
}
return res;
}
internal static unsafe iresultsbase MoveCurium(INCCAnalysisState ias, MeasOptionSelector mos)
{
results_curium_ratio_rec res = new results_curium_ratio_rec();
INCCMethodResult result;
bool found = ias.Results.TryGetMethodResults(mos.MultiplicityParams, ias.Methods.selector, AnalysisMethod.CuriumRatio, out result);
if (found)
{
INCCMethodResults.results_curium_ratio_rec m = (INCCMethodResults.results_curium_ratio_rec)result;
res.cr_pu240e_mass = m.pu.pu240e_mass.v;
res.cr_pu240e_mass_err = m.pu.pu240e_mass.err;
res.cr_cm_mass = m.cm_mass.v;
res.cr_cm_mass_err = m.cm_mass.err;
res.cr_pu_mass = m.pu.mass.v;
res.cr_pu_mass_err = m.pu.mass.err;
res.cr_u_mass = m.u.mass.v;
res.cr_u_mass_err = m.u.mass.err;
res.cr_u235_mass = m.u235.mass.v;
res.cr_u235_mass_err = m.u235.mass.err;
res.cr_dcl_pu_mass = m.pu.dcl_mass;
res.cr_dcl_minus_asy_pu_mass = m.pu.dcl_minus_asy_mass.v;
res.cr_dcl_minus_asy_pu_mass_err = m.pu.dcl_minus_asy_mass.err;
res.cr_dcl_minus_asy_pu_mass_pct = m.pu.dcl_minus_asy_mass_pct;
res.cr_dcl_minus_asy_u_mass = m.u235.dcl_minus_asy_mass.v;
res.cr_dcl_minus_asy_u_mass_err = m.u235.dcl_minus_asy_mass.err;
res.cr_dcl_minus_asy_u_mass_pct = m.u235.dcl_minus_asy_mass_pct;
res.cr_dcl_minus_asy_u235_mass = m.u235.dcl_minus_asy_mass.v;
res.cr_dcl_minus_asy_u235_mass_err = m.u235.dcl_minus_asy_mass.err;
res.cr_dcl_minus_asy_u235_mass_pct = m.u235.dcl_minus_asy_mass_pct;
StatePack(m.pu.pass, res.cr_pu_pass_fail);
StatePack(m.u.pass, res.cr_u_pass_fail);
res.cr_cm_pu_ratio = m.methodParams2.cm_pu_ratio.v;
res.cr_cm_pu_ratio_err = m.methodParams2.cm_pu_ratio.err;
res.cr_pu_half_life = m.methodParams2.pu_half_life;
byte[] b = new byte[INCC.DATE_TIME_LENGTH];
char[] a = m.methodParams2.cm_pu_ratio_date.ToString("yy.MM.dd").ToCharArray();
Encoding.ASCII.GetBytes(a, 0, a.Length, b, 0);
TransferUtils.Copy(b, res.cr_cm_pu_ratio_date);
res.cr_cm_u_ratio = m.methodParams2.cm_u_ratio.v;
res.cr_cm_u_ratio = m.methodParams2.cm_u_ratio.err;
a = m.methodParams2.cm_u_ratio_date.ToString("yy.MM.dd").ToCharArray();
Encoding.ASCII.GetBytes(a, 0, a.Length, b, 0);
TransferUtils.Copy(b, res.cr_cm_u_ratio_date);
StrToBytes(INCC.MAX_ITEM_ID_LENGTH, m.methodParams2.cm_id_label, res.cr_cm_id_label);
StrToBytes(INCC.MAX_ITEM_ID_LENGTH, m.methodParams2.cm_id, res.cr_cm_id);
StrToBytes(INCC.MAX_ITEM_ID_LENGTH, m.methodParams2.cm_input_batch_id, res.cr_cm_input_batch_id);
res.cr_dcl_u_mass_res = m.methodParams2.cm_dcl_u_mass;
res.cr_dcl_u235_mass_res = m.methodParams2.cm_dcl_u_mass;
res.cr_cm_pu_ratio_decay_corr = m.cm_pu_ratio_decay_corr.v;
res.cr_cm_pu_ratio_decay_corr_err = m.cm_pu_ratio_decay_corr.err;
res.cr_cm_u_ratio_decay_corr = m.cm_u_ratio_decay_corr.v;
res.cr_cm_u_ratio_decay_corr_err = m.cm_u_ratio_decay_corr.err;
res.cr_curium_ratio_equation = (byte)m.methodParams.cev.cal_curve_equation;
res.cr_a_res = m.methodParams.cev.a;
res.cr_b_res = m.methodParams.cev.b;
res.cr_c_res = m.methodParams.cev.c;
res.cr_d_res = m.methodParams.cev.d;
res.cr_covar_ab_res = m.methodParams.cev.covar(Coeff.a, Coeff.b);
res.cr_covar_ac_res = m.methodParams.cev.covar(Coeff.a, Coeff.c);
res.cr_covar_ad_res = m.methodParams.cev.covar(Coeff.a, Coeff.d);
res.cr_covar_bc_res = m.methodParams.cev.covar(Coeff.b, Coeff.c);
res.cr_covar_bd_res = m.methodParams.cev.covar(Coeff.b, Coeff.d);
res.cr_covar_cd_res = m.methodParams.cev.covar(Coeff.c, Coeff.d);
res.cr_var_a_res = m.methodParams.cev.var_a;
res.cr_var_b_res = m.methodParams.cev.var_b;
res.cr_var_c_res = m.methodParams.cev.var_c;
res.cr_var_d_res = m.methodParams.cev.var_d;
res.cr_sigma_x_res = m.methodParams.cev.sigma_x;
res.curium_ratio_type_res = NewToOldCRVariants(m.methodParams.curium_ratio_type);
StrToBytes(INCC.MAX_DETECTOR_ID_LENGTH, ias.Methods.selector.detectorid, res.cr_curium_ratio_detector_id);
StrToBytes(INCC.MAX_ITEM_TYPE_LENGTH, ias.Methods.selector.material, res.cr_curium_ratio_item_type);
}
return res;
}
internal static unsafe iresultsbase MoveCalCurve(INCCAnalysisState ias, MeasOptionSelector mos)
{
results_cal_curve_rec res = new results_cal_curve_rec();
INCCMethodResult result;
bool found = ias.Results.TryGetMethodResults(mos.MultiplicityParams, ias.Methods.selector, AnalysisMethod.CalibrationCurve, out result);
if (found)
{
INCCMethodResults.results_cal_curve_rec m = (INCCMethodResults.results_cal_curve_rec)result;
res.cc_pu240e_mass = m.pu240e_mass.v;
res.cc_pu240e_mass_err = m.pu240e_mass.err;
res.cc_pu_mass = m.pu_mass.v;
res.cc_pu_mass_err = m.pu_mass.err;
res.cc_dcl_pu240e_mass = m.dcl_pu240e_mass;
res.cc_dcl_pu_mass = m.dcl_pu_mass;
res.cc_dcl_minus_asy_pu_mass = m.dcl_minus_asy_pu_mass.v;
res.cc_dcl_minus_asy_pu_mass_err = m.dcl_minus_asy_pu_mass.err;
res.cc_dcl_minus_asy_pu_mass_pct = m.dcl_minus_asy_pu_mass_pct;
StatePack(m.pass, res.cc_pass_fail);
res.cc_dcl_u_mass = m.dcl_u_mass;
res.cc_length = m.length;
res.cc_heavy_metal_content = m.heavy_metal_content;
res.cc_heavy_metal_correction = m.heavy_metal_correction;
res.cc_heavy_metal_corr_singles = m.heavy_metal_corr_singles.v;
res.cc_heavy_metal_corr_singles_err = m.heavy_metal_corr_singles.err;
res.cc_heavy_metal_corr_doubles = m.heavy_metal_corr_doubles.v;
res.cc_heavy_metal_corr_doubles_err = m.heavy_metal_corr_doubles.err;
StrToBytes(INCC.MAX_DETECTOR_ID_LENGTH, ias.Methods.selector.detectorid, res.cc_cal_curve_detector_id);
StrToBytes(INCC.MAX_ITEM_TYPE_LENGTH, ias.Methods.selector.material, res.cc_cal_curve_item_type);
res.cc_a_res = m.methodParams.cev.a;
res.cc_b_res = m.methodParams.cev.b;
res.cc_c_res = m.methodParams.cev.c;
res.cc_d_res = m.methodParams.cev.d;
res.cc_cal_curve_type_res = (double)m.methodParams.CalCurveType;
res.cc_covar_ab_res = m.methodParams.cev.covar(Coeff.a, Coeff.b);
res.cc_covar_ac_res = m.methodParams.cev.covar(Coeff.a, Coeff.c);
res.cc_covar_ad_res = m.methodParams.cev.covar(Coeff.a, Coeff.d);
res.cc_covar_bc_res = m.methodParams.cev.covar(Coeff.b, Coeff.c);
res.cc_covar_bd_res = m.methodParams.cev.covar(Coeff.b, Coeff.d);
res.cc_covar_cd_res = m.methodParams.cev.covar(Coeff.c, Coeff.d);
res.cc_var_a_res = m.methodParams.cev.var_a;
res.cc_var_b_res = m.methodParams.cev.var_b;
res.cc_var_c_res = m.methodParams.cev.var_c;
res.cc_var_d_res = m.methodParams.cev.var_d;
res.cc_sigma_x_res = m.methodParams.cev.sigma_x;
res.cc_heavy_metal_corr_factor_res = m.methodParams.heavy_metal_corr_factor;
res.cc_heavy_metal_reference_res = m.methodParams.heavy_metal_reference;
res.cc_percent_u235_res = m.methodParams.percent_u235;
}
return res;
}
protected Section ConstructReportSection(INCCReportSection section, Detector det, MeasOptionSelector moskey = null)
{
INCCStyleSection sec = null;
try
{
switch (section)
{
case INCCReportSection.Header:
sec = new INCCStyleSection(null, 1);
sec.AddHeader(N.App.Name + " " + N.App.Config.VersionString); // section header
break;
case INCCReportSection.Context:
sec = new INCCStyleSection(null, 1);
ConstructContextContent(sec, det);
break;
case INCCReportSection.Isotopics:
if (AssaySelector.ForMass(meas.MeasOption))
{
sec = new INCCStyleSection(null, 1);
sec.SetFPCurrentFormatPrecision(4);
Isotopics curiso = Isotopics.update_isotopics(1.0, meas.MeasDate, meas.Isotopics, meas.logger, N.App.AppContext.INCCParity);
if (curiso == null)
{
curiso = new Isotopics();
meas.Isotopics.CopyTo(curiso);
ctrllog.TraceEvent(LogLevels.Warning, 82034, "Using incorrect updated defaults for " + meas.Isotopics.id);
}
sec.AddTwo("Isotopics id:", meas.Isotopics.id);
sec.AddTwo("Isotopics source code:", meas.Isotopics.source_code.ToString());
sec.AddDualNumericRow("Pu238:", meas.Isotopics[Isotope.pu238], curiso[Isotope.pu238]);
sec.AddDualNumericRow("Pu239:", meas.Isotopics[Isotope.pu239], curiso[Isotope.pu239]);
sec.AddDualNumericRow("Pu240:", meas.Isotopics[Isotope.pu240], curiso[Isotope.pu240]);
sec.AddDualNumericRow("Pu241:", meas.Isotopics[Isotope.pu241], curiso[Isotope.pu241]);
sec.AddDualNumericRow("Pu242:", meas.Isotopics[Isotope.pu242], curiso[Isotope.pu242]);
sec.AddDualDateOnlyRow("Pu date:", meas.Isotopics.pu_date, curiso.pu_date);
sec.AddDualNumericRow("Am241:", meas.Isotopics[Isotope.am241], curiso[Isotope.am241]);
sec.AddDualDateOnlyRow("Am date:", meas.Isotopics.am_date, curiso.am_date);
// dev note: here is where the alternative K vals are added in the Euratom version
}
break;
case INCCReportSection.ShiftRegister:
sec = new INCCStyleSection(null, 1);
ConstructSRSection(sec, moskey.MultiplicityParams, det);
break;
case INCCReportSection.Adjustments:
sec = new INCCStyleSection(null, 1);
if (AssaySelector.ForMass(meas.MeasOption) || meas.MeasOption == AssaySelector.MeasurementOption.rates)
{
ushort push = sec.FPFormatPrecision;
sec.SetFPCurrentFormatPrecision(4);
sec.AddNumericRow("Normalization constant:", meas.Norm.currNormalizationConstant);
sec.SetFPCurrentFormatPrecision(push);
}
if (AssaySelector.UsesBackground(meas.MeasOption))
{
sec.AddNumericRow("Passive singles bkgrnd:", meas.Background.DeadtimeCorrectedSinglesRate);
sec.AddNumericRow("Passive doubles bkgrnd:", meas.Background.DeadtimeCorrectedDoublesRate);
sec.AddNumericRow("Passive triples bkgrnd:", meas.Background.DeadtimeCorrectedTriplesRate);
if (det.Id.SRType <= InstrType.AMSR)
{
sec.AddNumericRow("Passive scaler1 bkgrnd:", meas.Background.Scaler1.v);
sec.AddNumericRow("Passive scaler2 bkgrnd:", meas.Background.Scaler2.v);
}
sec.AddNumericRow("Active singles bkgrnd:", meas.Background.INCCActive.Singles);
sec.AddNumericRow("Active doubles bkgrnd:", meas.Background.INCCActive.Doubles);
sec.AddNumericRow("Active triples bkgrnd:", meas.Background.INCCActive.Triples);
if (det.Id.SRType <= InstrType.AMSR)
{
sec.AddNumericRow("Passive scaler1 bkgrnd:", meas.Background.INCCActive.Scaler1Rate);
sec.AddNumericRow("Passive scaler2 bkgrnd:", meas.Background.INCCActive.Scaler2Rate);
}
}
break;
case INCCReportSection.CycleSummary:
sec = new INCCStyleSection(null, 1);
sec.AddIntegerRow(String.Format("Number {0} cycles:", meas.INCCAnalysisState.Methods.HasActiveSelected() || meas.INCCAnalysisState.Methods.HasActiveMultSelected()?"Active":"Passive"), (int)meas.Cycles.GetValidCycleCountForThisKey(moskey.MultiplicityParams)); //det.MultiplicityParams)); // could also use CycleList length but CycleList can be longer when a reanalysis occurs and the analysis processing stops short of the end of the list due to modified termination conditions
sec.AddNumericRow("Count time (sec):", (meas.Cycles.Count > 0 ? meas.Cycles[0].TS.TotalSeconds : 0.0));
break;
case INCCReportSection.Messages:
List <MeasurementMsg> sl = null;
bool found = meas.Messages.TryGetValue(moskey.MultiplicityParams, out sl);
if (found)
{
sec = new INCCStyleSection(null, 1);
sec.AddHeader(String.Format("{0} messages", meas.INCCAnalysisState.Methods.HasActiveSelected() || meas.INCCAnalysisState.Methods.HasActiveMultSelected() ? "Active" : "Passive")); /// todo: is there an active messages section header analog?
foreach (MeasurementMsg m in sl)
{
Row r = new Row();
r.Add(0, m.text); // expand to log style with toString?
sec.Add(r);
}
}
break;
case INCCReportSection.Reference:
sec = new INCCStyleSection(null, 1);
sec.AddHeader("Counting results, summaries and cycle counts file name"); // section header
Row resline = new Row(); resline.Add(0, " " + meas.ResultsFileName);
sec.Add(resline);
break;
default:
break;
}
}
catch (Exception e)
{
ctrllog.TraceException(e);
}
return(sec);
}
protected Section ConstructReportSection(INCCReportSection section, Detector det, MeasOptionSelector moskey = null)
{
INCCStyleSection sec = null;
try
{
switch (section)
{
case INCCReportSection.Header:
sec = new INCCStyleSection(null, 1);
sec.AddHeader(N.App.Name + " " + N.App.Config.VersionString); // section header
break;
case INCCReportSection.Context:
sec = new INCCStyleSection(null, 1);
ConstructContextContent(sec, det);
break;
case INCCReportSection.Isotopics:
if (AssaySelector.ForMass(meas.MeasOption))
{
sec = new INCCStyleSection(null, 1);
sec.SetFPCurrentFormatPrecision(4);
Isotopics curiso = Isotopics.update_isotopics(1.0, meas.MeasDate, meas.Isotopics, meas.logger, N.App.AppContext.INCCParity);
if (curiso == null)
{
curiso = new Isotopics();
meas.Isotopics.CopyTo(curiso);
ctrllog.TraceEvent(LogLevels.Warning, 82034, "Using incorrect updated defaults for " + meas.Isotopics.id);
}
sec.AddTwo("Isotopics id:", meas.Isotopics.id);
sec.AddTwo("Isotopics source code:", meas.Isotopics.source_code.ToString());
sec.AddDualNumericRow("Pu238:", meas.Isotopics[Isotope.pu238], curiso[Isotope.pu238]);
sec.AddDualNumericRow("Pu239:", meas.Isotopics[Isotope.pu239], curiso[Isotope.pu239]);
sec.AddDualNumericRow("Pu240:", meas.Isotopics[Isotope.pu240], curiso[Isotope.pu240]);
sec.AddDualNumericRow("Pu241:", meas.Isotopics[Isotope.pu241], curiso[Isotope.pu241]);
sec.AddDualNumericRow("Pu242:", meas.Isotopics[Isotope.pu242], curiso[Isotope.pu242]);
sec.AddDualDateOnlyRow("Pu date:", meas.Isotopics.pu_date, curiso.pu_date);
sec.AddDualNumericRow("Am241:", meas.Isotopics[Isotope.am241], curiso[Isotope.am241]);
sec.AddDualDateOnlyRow("Am date:", meas.Isotopics.am_date, curiso.am_date);
// dev note: here is where the alternative K vals are added in the Euratom version
}
break;
case INCCReportSection.ShiftRegister:
sec = new INCCStyleSection(null, 1);
ConstructSRSection(sec, moskey.MultiplicityParams, det);
break;
case INCCReportSection.Adjustments:
sec = new INCCStyleSection(null, 1);
if (AssaySelector.ForMass(meas.MeasOption) || meas.MeasOption == AssaySelector.MeasurementOption.rates)
{
ushort push = sec.FPFormatPrecision;
sec.SetFPCurrentFormatPrecision(4);
sec.AddNumericRow("Normalization constant:", meas.Norm.currNormalizationConstant);
sec.SetFPCurrentFormatPrecision(push);
}
if (AssaySelector.UsesBackground(meas.MeasOption))
{
sec.AddNumericRow("Passive singles bkgrnd:", meas.Background.DeadtimeCorrectedSinglesRate);
sec.AddNumericRow("Passive doubles bkgrnd:", meas.Background.DeadtimeCorrectedDoublesRate);
sec.AddNumericRow("Passive triples bkgrnd:", meas.Background.DeadtimeCorrectedTriplesRate);
if (det.Id.SRType <= InstrType.AMSR)
{
sec.AddNumericRow("Passive scaler1 bkgrnd:", meas.Background.Scaler1.v);
sec.AddNumericRow("Passive scaler2 bkgrnd:", meas.Background.Scaler2.v);
}
sec.AddNumericRow("Active singles bkgrnd:", meas.Background.INCCActive.Singles);
sec.AddNumericRow("Active doubles bkgrnd:", meas.Background.INCCActive.Doubles);
sec.AddNumericRow("Active triples bkgrnd:", meas.Background.INCCActive.Triples);
if (det.Id.SRType <= InstrType.AMSR)
{
sec.AddNumericRow("Passive scaler1 bkgrnd:", meas.Background.INCCActive.Scaler1Rate);
sec.AddNumericRow("Passive scaler2 bkgrnd:", meas.Background.INCCActive.Scaler2Rate);
}
}
break;
case INCCReportSection.CycleSummary:
sec = new INCCStyleSection(null, 1);
sec.AddIntegerRow(String.Format("Number {0} cycles:",meas.INCCAnalysisState.Methods.HasActiveSelected() || meas.INCCAnalysisState.Methods.HasActiveMultSelected()?"Active":"Passive"), (int)meas.Cycles.GetValidCycleCountForThisKey(moskey.MultiplicityParams)); //det.MultiplicityParams)); // could also use CycleList length but CycleList can be longer when a reanalysis occurs and the analysis processing stops short of the end of the list due to modified termination conditions
sec.AddNumericRow("Count time (sec):", (meas.Cycles.Count > 0 ? meas.Cycles[0].TS.TotalSeconds : 0.0));
break;
case INCCReportSection.Messages:
List<MeasurementMsg> sl = null;
bool found = meas.Messages.TryGetValue(moskey.MultiplicityParams, out sl);
if (found)
{
sec = new INCCStyleSection(null, 1);
sec.AddHeader(String.Format("{0} messages", meas.INCCAnalysisState.Methods.HasActiveSelected() || meas.INCCAnalysisState.Methods.HasActiveMultSelected() ? "Active" : "Passive")); /// todo: is there an active messages section header analog?
foreach (MeasurementMsg m in sl)
{
Row r = new Row();
r.Add(0, m.text); // expand to log style with toString?
sec.Add(r);
}
}
break;
case INCCReportSection.Reference:
sec = new INCCStyleSection(null, 1);
sec.AddHeader("Counting results, summaries and cycle counts file name"); // section header
Row resline = new Row(); resline.Add(0, " " + meas.ResultsFileName);
sec.Add(resline);
break;
default:
break;
}
}
catch (Exception e)
{
ctrllog.TraceException(e);
}
return sec;
}
/// <summary>
/// Save in the database the summary <see cref="INCCResults.results_rec"/> results for every type of INCC measurement.
/// </summary>
/// <param name="m">The measurement to preserve</param>
/// <param name="moskey">The option selector+multiplicity key for the method results map</param>
static void SaveSummaryResultsForThisMeasurement(this Measurement m, MeasOptionSelector moskey)
{
DB.Measurements ms = new DB.Measurements();
long mid = ms.Lookup(m.Detectors[0].Id.DetectorName, m.MeasDate, m.MeasOption.PrintName());
DB.Results dbres = new DB.Results(ms.db);
// save results with mid as foreign key
bool b = dbres.Update(mid, m.INCCAnalysisResults.TradResultsRec.ToDBElementList());
m.Logger.TraceEvent(NCCReporter.LogLevels.Info, 34045, (b ? "Preserved " : "Failed to save ") + "summary results");
}
/// <summary>
/// Save all updated and new results in the database
/// </summary>
public static void SaveMeasurementResults(this Measurement meas)
{
SaveMeasurementCycles(meas);
IEnumerator iter = meas.CountingAnalysisResults.GetMultiplicityEnumerator();
while (iter.MoveNext())
{
Multiplicity mkey = (Multiplicity)((KeyValuePair<SpecificCountingAnalyzerParams, object>)(iter.Current)).Key;
if (NC.App.Opstate.IsAbortRequested)
return;
INCCResult results;
MeasOptionSelector moskey = new MeasOptionSelector(meas.MeasOption, mkey);
bool found = meas.INCCAnalysisResults.TryGetValue(moskey, out results);
try
{
switch (meas.MeasOption)
{
case AssaySelector.MeasurementOption.background: // calculated in CalculateResults, update bkg and save the result to the DB
// save the background result to the bkg_parms_rec table under the current SR key
BackgroundParameters c = NC.App.DB.BackgroundParameters.Get(meas.Detectors[0]);
if (c != null)
c.Copy(meas.Background); // copy changes back to original on user affirmation
else
{
c = meas.Background;
NC.App.DB.BackgroundParameters.GetMap().Add(meas.Detectors[0], c);
}
NC.App.DB.BackgroundParameters.Set(meas.Detectors[0], c);
break;
case AssaySelector.MeasurementOption.initial: // calculated in CalculateResults, update norm and save the norm and init_src result to the DB
INCCResults.results_init_src_rec results_init_src = (INCCResults.results_init_src_rec)results;
// on fail, only the relevant results_init_src_rec is saved
// on pass, the normalization parameters are modified with the results_init_src_rec results, and so both are updated.
if (results_init_src.pass)
{
NormParameters np = NC.App.DB.NormParameters.Get(meas.Detectors[0]);
if (np != null)
np.Copy(meas.Norm); // copy any changes made to Norm as defined for the current detector
else
{
np = meas.Norm;
NC.App.DB.NormParameters.GetMap().Add(meas.Detectors[0], np);
}
NC.App.DB.NormParameters.Set(meas.Detectors[0], np);
}
SaveSpecificResultsForThisMeasurement(meas, results);
break;
case AssaySelector.MeasurementOption.normalization: // calculated in CalculateResults, now save the result to the DB
case AssaySelector.MeasurementOption.precision: // ditto
SaveSpecificResultsForThisMeasurement(meas, results);
break;
case AssaySelector.MeasurementOption.calibration: // ditto with the method analyses results, but they're a bit different
case AssaySelector.MeasurementOption.verification:
SaveMethodResultsForThisMeasurement(meas, moskey);
break;
case AssaySelector.MeasurementOption.holdup: // NEXT: Hold-up held up, implement it #102
break;
}
}
catch (Exception e)
{
meas.Logger.TraceException(e);
}
SaveSummaryResultsForThisMeasurement(meas, moskey);
}
meas.PersistFileNames();
}
protected Section ConstructReportSection(INCCTestDataSection section, Detector det, MeasOptionSelector moskey = null)
{
INCCTestDataStyle sec = null;
try
{
switch (section)
{
case INCCTestDataSection.CycleSummary:
sec = new INCCTestDataStyle(null, 0);
sec.AddOne((Int32)meas.Cycles.GetValidCycleCountForThisKey(moskey.MultiplicityParams)); // could also use CycleList length but CycleList can be longer when a reanalysis occurs and the analysis processing stops short of the end of the list due to modified termination conditions
sec.AddOne((Int32)(meas.Cycles.Count > 0 ? meas.Cycles[0].TS.TotalSeconds : 0.0));
break;
default:
break;
}
}
catch (Exception e)
{
ctrllog.TraceException(e);
}
return(sec);
}
protected Section ConstructReportSection(INCCReportSection section, MeasOptionSelector moskey, INCCResult ir, Detector det)
{
INCCStyleSection sec = null;
try
{
switch (section)
{
// NEXT: in progress, an identical copy of full INCC report sections
case INCCReportSection.SummedRawData:
sec = new INCCStyleSection(null, 1, INCCStyleSection.ReportSection.Summary);
sec.SetFPCurrentFormatPrecision(0);
sec.AddHeader(String.Format("{0} summed raw data", meas.INCCAnalysisState.Methods.HasActiveSelected() || meas.INCCAnalysisState.Methods.HasActiveMultSelected()?"Active":"Passive")); // section header
sec.AddNumericRow("Shift register singles sum:", meas.SinglesSum);
sec.AddNumericRow("Shift register reals + accidentals sum:", ir.RASum);
sec.AddNumericRow("Shift register accidentals sum:", ir.ASum);
if (!det.Id.source.UsingVirtualSRCounting(det.Id.SRType))
{
sec.AddNumericRow("Shift register 1st scaler sum:", ir.S1Sum);
sec.AddNumericRow("Shift register 2nd scaler sum:", ir.S2Sum);
}
break;
case INCCReportSection.SummedRA:
sec = new INCCStyleSection(null, 1, INCCStyleSection.ReportSection.MultiColumn);
sec.AddHeader(String.Format("{0} summed multiplicity distributions", meas.INCCAnalysisState.Methods.HasActiveSelected() || meas.INCCAnalysisState.Methods.HasActiveMultSelected()?"Active":"Passive")); // section header
int[] srawidths = new int[] { 5, 12, 12 };
int minbin, maxbin;
minbin = Math.Min(ir.RAMult.Length, ir.NormedAMult.Length);
maxbin = Math.Max(ir.RAMult.Length, ir.NormedAMult.Length);
sec.AddColumnRowHeader(new string[] { " ", "R+A sums", "A sums" }, srawidths);
for (int i = 0; i < minbin; i++)
{
sec.AddColumnRow(new ulong[] { (ulong)i, ir.RAMult[i], ir.NormedAMult[i] }, srawidths);
}
for (int i = minbin; i < maxbin; i++) // check for uneven column
{
ulong[] potential = new ulong[3];
potential[0] = (ulong)i;
if (i < ir.RAMult.Length)
{
potential[1] = ir.RAMult[i];
}
if (i < ir.NormedAMult.Length)
{
potential[2] = ir.NormedAMult[i];
}
sec.AddColumnRow(potential, srawidths);
}
break;
case INCCReportSection.MassResults:
sec = new INCCStyleSection(null, 1, INCCStyleSection.ReportSection.MethodResults);
//Results are not always passive. Boo.
sec.AddHeader(String.Format("{0} Results", meas.INCCAnalysisState.Methods.HasActiveSelected() || meas.INCCAnalysisState.Methods.HasActiveMultSelected()?"Active":"Passive")); // section header
sec.AddNumericRow("Singles:", ir.DeadtimeCorrectedSinglesRate);
sec.AddNumericRow("Doubles:", ir.DeadtimeCorrectedDoublesRate);
sec.AddNumericRow("Triples:", ir.DeadtimeCorrectedTriplesRate);
//changed to DTC rates. Raw rates meaningless here hn 11.5.2014
//sec.AddNumericRow("Quads:", mcr.DeadtimeCorrectedQuadsRate); // todo: quads delayed until pents are ready per DN
if (!det.Id.source.UsingVirtualSRCounting(det.Id.SRType))
{
sec.AddNumericRow("Scaler 1:", ir.Scaler1);
sec.AddNumericRow("Scaler 2:", ir.Scaler2);
}
//if (det.Id.SRType >= LMDAQ.InstrType.NPOD)
//{
// sec.Add(new Row()); // blank line
// sec.AddNumericRow("Dyt. Singles:", ir.DytlewskiCorrectedSinglesRate);
// sec.AddNumericRow("Dyt. Doubles:", ir.DytlewskiCorrectedDoublesRate);
// sec.AddNumericRow("Dyt. Triples:", ir.DytlewskiCorrectedTriplesRate);
//}
break;
case INCCReportSection.MethodResultsAndParams:
// ir contains the measurement option-specific results: empty for rates and holdup, and also empty for calib and verif, the method-focused analyses,
// but values are present for initial, normalization, precision, and should be present for background for the tm bkg results
List <Row> rl = ir.ToLines(meas);
sec = new INCCStyleSection(null, 0, INCCStyleSection.ReportSection.MethodResults);
sec.AddRange(rl);
switch (meas.MeasOption)
{
case AssaySelector.MeasurementOption.background:
if (meas.Background.TMBkgParams.ComputeTMBkg)
{
ctrllog.TraceEvent(LogLevels.Warning, 82010, "Background truncated multiplicity"); // todo: present the tm bkg results on m.Background
}
break;
case AssaySelector.MeasurementOption.initial:
case AssaySelector.MeasurementOption.normalization:
case AssaySelector.MeasurementOption.precision:
break;
case AssaySelector.MeasurementOption.verification:
case AssaySelector.MeasurementOption.calibration:
{
INCCMethodResults imrs;
bool beendonegot = meas.INCCAnalysisResults.TryGetINCCResults(moskey.MultiplicityParams, out imrs);
if (beendonegot && imrs.Count > 0) // should be true for verification and calibration
{
// we've got a distinct detector id and material type on the methods, so that is the indexer here
Dictionary <AnalysisMethod, INCCMethodResult> amimr = imrs[meas.INCCAnalysisState.Methods.selector];
// now get an enumerator over the map of method results
Dictionary <AnalysisMethod, INCCMethodResult> .Enumerator ai = amimr.GetEnumerator();
while (ai.MoveNext())
{
INCCMethodResult imr = ai.Current.Value;
// show the primaryMethod
if (ai.Current.Key.Equals(imrs.primaryMethod))
{
sec.Add(new Row());
Row rh = new Row();
rh.Add(0, " PRIMARY RESULT");
sec.Add(rh);
}
rl = imr.ToLines(meas);
sec.AddRange(rl);
// todo: optional use of END_PRIMARY_RESULT as in some INCC report formats, but not others
}
}
}
break;
case AssaySelector.MeasurementOption.rates:
case AssaySelector.MeasurementOption.holdup:
case AssaySelector.MeasurementOption.unspecified:
default: // nothing new to present with these
break;
}
break;
case INCCReportSection.RawCycles:
sec = new INCCStyleSection(null, 1, INCCStyleSection.ReportSection.MultiColumn);
sec.AddHeader(String.Format("{0} cycle raw data", meas.INCCAnalysisState.Methods.HasActiveSelected() || meas.INCCAnalysisState.Methods.HasActiveMultSelected()?"Active":"Passive")); // section header
int[] crdwidths = new int[] { 5, 10, 10, 10, 10, 10, 10 };
sec.AddColumnRowHeader(new string[] { "Cycle", "Singles", "R+A ", "A ", "Scaler1", "Scaler2", "QC Tests" }, crdwidths);
foreach (Cycle cyc in meas.Cycles)
{
// if no results on the cycle, these map indexers throw
if (cyc.CountingAnalysisResults.GetResultsCount(typeof(Multiplicity)) > 0) // if no results on the cycle, these map indexers throw
{
MultiplicityCountingRes mcr = (MultiplicityCountingRes)cyc.CountingAnalysisResults[moskey.MultiplicityParams];
sec.AddCycleColumnRow(cyc.seq,
new ulong[] { (ulong)mcr.Totals, (ulong)mcr.RASum, (ulong)mcr.ASum, (ulong)mcr.Scaler1.v, (ulong)mcr.Scaler2.v },
meas.AcquireState.qc_tests?cyc.QCStatus(moskey.MultiplicityParams).INCCString():"Off", crdwidths);
}
}
break;
case INCCReportSection.DTCRateCycles:
sec = new INCCStyleSection(null, 1, INCCStyleSection.ReportSection.MultiColumn);
sec.AddHeader(String.Format("{0} cycle DTC rate data", meas.AcquireState.well_config == WellConfiguration.Active?"Active":"Passive")); // section header
int[] crawidths = new int[] { 5, 13, 13, 13, 13, 10 };
sec.AddColumnRowHeader(new string[] { "Cycle", "Singles", "Doubles", "Triples", "Mass", "QC Tests" }, crawidths);
foreach (Cycle cyc in meas.Cycles)
{
if (cyc.CountingAnalysisResults.GetResultsCount(typeof(Multiplicity)) > 0) // if no results on the cycle, these map indexers throw
{
MultiplicityCountingRes mcr = (MultiplicityCountingRes)cyc.CountingAnalysisResults[moskey.MultiplicityParams];
//These debug rows show raw rates for comparison hn 10.30
//sec.AddCycleColumnRow(cyc.seq,
//Again, could be wrong.
// new double[] { mcr.RawSinglesRate.v, mcr.RawDoublesRate.v, -1, -1 },
// cyc.QCStatus(moskey.MultiplicityParams).INCCString(), crawidths);
//Again, could be wrong.
// TODO: Am actually printing out the DTC rates per cycle. This seems to work in all cases EXCEPT "precision" hn 11.5
sec.AddCycleColumnRow(cyc.seq,
// Using the corrected rates!
new double[] { mcr.DeadtimeCorrectedSinglesRate.v, mcr.DeadtimeCorrectedDoublesRate.v, mcr.DeadtimeCorrectedTriplesRate.v, mcr.mass /*Mass*/ },
meas.AcquireState.qc_tests?cyc.QCStatus(moskey.MultiplicityParams).INCCString():"Off", crawidths);
}
}
break;
case INCCReportSection.MultiplicityDistributions:
sec = new INCCStyleSection(null, 1, INCCStyleSection.ReportSection.MultiColumn);
sec.AddHeader(String.Format("{0} multiplicity distributions for each cycle", meas.INCCAnalysisState.Methods.HasActiveSelected() || meas.INCCAnalysisState.Methods.HasActiveMultSelected()?"Active":"Passive")); // section header
int[] csrawidths = new int[] { 6, 12, 12 };
foreach (Cycle cyc in meas.Cycles)
{
if (cyc.CountingAnalysisResults.GetResultsCount(typeof(Multiplicity)) > 0) // if no results on the cycle, these map indexers throw
{
MultiplicityCountingRes mcr = (MultiplicityCountingRes)cyc.CountingAnalysisResults[moskey.MultiplicityParams];
minbin = Math.Min(mcr.RAMult.Length, mcr.NormedAMult.Length);
maxbin = Math.Max(mcr.RAMult.Length, mcr.NormedAMult.Length);
sec.AddColumnRowHeader(new string[] { "Cycle " + cyc.seq, "R+A ", "A " }, csrawidths);
for (int i = 0; i < minbin; i++)
{
sec.AddColumnRow(new ulong[] { (ulong)i, mcr.RAMult[i], mcr.NormedAMult[i] }, csrawidths);
}
for (int i = minbin; i < maxbin; i++) // check for uneven column
{
ulong[] potential = new ulong[3];
potential[0] = (ulong)i;
if (i < mcr.RAMult.Length)
{
potential[1] = mcr.RAMult[i];
}
if (i < mcr.NormedAMult.Length)
{
potential[2] = mcr.NormedAMult[i];
}
sec.AddColumnRow(potential, csrawidths);
}
}
sec.Add(new Row()); // blank
}
break;
default:
break;
}
}
catch (Exception e)
{
ctrllog.TraceException(e);
}
return(sec);
}
public void GenerateReport(Measurement m)
{
if (N.App.Opstate.IsAbortRequested) // handle stop, cancel, abort here, for stop does it roll back all report gen from here?
{
return;
}
IEnumerator iter = m.INCCAnalysisResults.GetMeasSelectorResultsEnumerator();
while (iter.MoveNext())
{
MeasOptionSelector moskey = (MeasOptionSelector)iter.Current;
INCCResult ir = m.INCCAnalysisResults[moskey];
// create one results for each SR key
StartReportGeneration(m, m.MeasOption.PrintName() + " INCC " +
(m.INCCAnalysisResults.Count > 1 ? "[" + moskey.MultiplicityParams.ShortName() + "] " : ""), // add an identifying signature to each file name if more than one active virtual SR
' '); // make these text files
//Detector det = meas.Detectors.GetIt(moskey.SRParams);
// now assuming only one detector on the list, so can use [0], the mos keys have specific values for virtual SR counting, overiding the detector
Detector det = meas.Detectors[0];
try
{
sections.Add(ConstructReportSection(INCCReportSection.Header, det));
sections.Add(ConstructReportSection(INCCReportSection.Context, det));
sections.Add(ConstructReportSection(INCCReportSection.Isotopics, det));
sections.Add(ConstructReportSection(INCCReportSection.ShiftRegister, det, moskey));
sections.Add(ConstructReportSection(INCCReportSection.Adjustments, det));
sections.Add(ConstructReportSection(INCCReportSection.CycleSummary, det, moskey));
sections.Add(ConstructReportSection(INCCReportSection.Messages, det, moskey));
sections.Add(ConstructReportSection(INCCReportSection.SummedRawData, moskey, ir, det));
sections.Add(ConstructReportSection(INCCReportSection.SummedRA, moskey, ir, det));
sections.Add(ConstructReportSection(INCCReportSection.MassResults, moskey, ir, det));
sections.Add(ConstructReportSection(INCCReportSection.MethodResultsAndParams, moskey, ir, det));
sections.Add(ConstructReportSection(INCCReportSection.RawCycles, moskey, ir, det));
sections.Add(ConstructReportSection(INCCReportSection.DTCRateCycles, moskey, ir, det));
sections.Add(ConstructReportSection(INCCReportSection.MultiplicityDistributions, moskey, ir, det));
sections.Add(ConstructReportSection(INCCReportSection.Reference, det));
sections.RemoveAll(s => (s == null));
// copy all section rows to the report row list (t.rows)
int rowcount = 0;
foreach (Section sec in sections)
{
rowcount += sec.Count;
}
Array.Resize(ref t.rows, rowcount);
int idx = 0;
foreach (Section sec in sections)
{
Array.Copy(sec.ToArray(), 0, t.rows, idx, sec.Count); idx += sec.Count;
}
}
catch (Exception e)
{
ctrllog.TraceException(e);
}
FinishReportGeneration();
}
}
internal static unsafe iresultsbase MoveTruncMult(INCCAnalysisState ias, MeasOptionSelector mos)
{
results_truncated_mult_rec res = new results_truncated_mult_rec();
INCCMethodResult result;
bool found = ias.Results.TryGetMethodResults(mos.MultiplicityParams, ias.Methods.selector, AnalysisMethod.TruncatedMultiplicity, out result);
if (found)
{
INCCMethodResults.results_truncated_mult_rec m = (INCCMethodResults.results_truncated_mult_rec)result;
res.tm_bkg_singles = m.bkg.Singles.v;
res.tm_bkg_singles_err = m.bkg.Singles.err;
res.tm_bkg_zeros = m.bkg.Zeros.v;
res.tm_bkg_zeros_err = m.bkg.Zeros.err;
res.tm_bkg_ones = m.bkg.Ones.v;
res.tm_bkg_ones_err = m.bkg.Ones.err;
res.tm_bkg_twos = m.bkg.Twos.v;
res.tm_bkg_twos_err = m.bkg.Twos.err;
res.tm_net_singles = m.net.Singles.v;
res.tm_net_singles_err = m.net.Singles.err;
res.tm_net_zeros = m.net.Zeros.v;
res.tm_net_zeros_err = m.net.Zeros.err;
res.tm_net_ones = m.net.Ones.v;
res.tm_net_ones_err = m.net.Ones.err;
res.tm_net_twos = m.net.Twos.v;
res.tm_net_twos_err = m.net.Twos.err;
res.tm_k_alpha = m.k.alpha.v;
res.tm_k_alpha_err = m.k.alpha.err;
res.tm_k_pu240e_mass = m.k.pu240e_mass.v;
res.tm_k_pu240e_mass_err = m.k.pu240e_mass.err;
res.tm_k_pu_mass = m.k.pu_mass.v;
res.tm_k_pu_mass_err = m.k.pu_mass.err;
res.tm_k_dcl_pu240e_mass = m.k.dcl_pu240e_mass;
res.tm_k_dcl_pu_mass = m.k.dcl_pu_mass;
res.tm_k_dcl_minus_asy_pu_mass = m.k.dcl_minus_asy_pu_mass.v;
res.tm_k_dcl_minus_asy_pu_mass_err = m.k.dcl_minus_asy_pu_mass.err;
res.tm_k_dcl_minus_asy_pu_mass_pct = m.k.dcl_minus_asy_pu_mass_pct;
StatePack(m.k.pass, res.tm_k_pass_fail);
res.tm_s_eff = m.s.eff.v;
res.tm_s_eff_err = m.s.eff.err;
res.tm_s_alpha = m.s.alpha.v;
res.tm_s_alpha_err = m.s.alpha.err;
res.tm_s_pu240e_mass = m.s.pu240e_mass.v;
res.tm_s_pu240e_mass_err = m.s.pu240e_mass.err;
res.tm_s_pu_mass = m.s.pu_mass.v;
res.tm_s_pu_mass_err = m.s.pu_mass.err;
res.tm_s_dcl_pu240e_mass = m.s.dcl_pu240e_mass;
res.tm_s_dcl_pu_mass = m.s.dcl_pu_mass;
res.tm_s_dcl_minus_asy_pu_mass = m.s.dcl_minus_asy_pu_mass.v;
res.tm_s_dcl_minus_asy_pu_mass_err = m.s.dcl_minus_asy_pu_mass.err;
res.tm_s_dcl_minus_asy_pu_mass_pct = m.s.dcl_minus_asy_pu_mass_pct;
StatePack(m.s.pass, res.tm_s_pass_fail);
res.tm_a_res = m.methodParams.a;
res.tm_b_res = m.methodParams.b;
res.tm_known_eff_res = (byte)(m.methodParams.known_eff ? 1 : 0);
res.tm_solve_eff_res = (byte)(m.methodParams.known_eff ? 1 : 0);
}
return res;
}
/// <summary>
/// Imprint a new measurement with as much information as possible from a results_rec.
/// </summary>
/// <param name="rec">The results_rec with the measurement details</param>
/// <param name="meaId">Unique id for the measurement, from the results_rec fields</param>
/// <param name="logger">logger handle</param>
/// <returns>A new measurement</returns>
public Measurement(INCCResults.results_rec rec, MeasId meaId, LMLoggers.LognLM logger)
{
HVCalibrationParameters hv = NCC.IntegrationHelpers.GetCurrentHVCalibrationParams(rec.det);
MeasurementTuple mt = new MeasurementTuple(new DetectorList(rec.det), rec.tests, rec.norm, rec.bkg, rec.iso, rec.acq, hv);
this.mt = mt;
this.logger = logger;
mid = meaId;
InitMisc();
if (rec.det.ListMode)
{
AnalysisParams = NC.App.LMBD.CountingParameters(rec.det, applySRFromDetector: true);
if (meaId.MeasOption.IsListMode()) // pure List Mode, not INCC5
{
// for a list-mode-only measurement with a multiplicity analyzer the detector SR params must match at least one of the multiplicity analyzer SR params
NCC.IntegrationHelpers.ApplyVSRChangesToDefaultDetector(this);
}
else // it is an INCC5 analysis driven with LM data
{
// prepare or identify an active CA entry with matching CA gatewidth and FA, with remaining SR params as the detector
AnalysisParams.PrepareMatchingVSR(rec.det.MultiplicityParams);
}
}
else
{
// prepare analyzer params from detector SR params
AnalysisParams = NC.App.LMBD.CountingParameters(rec.det, applySRFromDetector: false);
if (!AnalysisParams.Exists(w => { return((w is Multiplicity) && (w as Multiplicity).Equals(rec.det.MultiplicityParams)); }))
{
AnalysisParams.Add(rec.det.MultiplicityParams);
}
}
// get the INCC5 analysis methods
INCCAnalysisState = new INCCAnalysisState();
INCCSelector sel = new INCCSelector(rec.acq.detector_id, rec.acq.item_type);
AnalysisMethods am;
bool found = NC.App.DB.DetectorMaterialAnalysisMethods.TryGetValue(sel, out am);
if (found)
{
am.selector = sel; // gotta do this so that the equality operator is correct
INCCAnalysisState.Methods = am;
}
else
{
INCCAnalysisState.Methods = new AnalysisMethods(sel);
}
InitializeContext(clearCounterResults: true);
PrepareINCCResults();
// a list mode measurement may not have a multiplicity analyzer at all, create on results, copying the current values
if (CountingAnalysisResults.ContainsKey(rec.det.MultiplicityParams))
{
MultiplicityCountingRes mcr = (MultiplicityCountingRes)CountingAnalysisResults[rec.det.MultiplicityParams];
if (rec.mcr.AB.Unset)
{
SDTMultiplicityCalculator.SetAlphaBeta(rec.det.MultiplicityParams, rec.mcr); // works only if MaxBins is set
}
mcr.CopyFrom(rec.mcr); // copy the mcr results onto the first moskey entry
// the same results are copied to the full results structure
MeasOptionSelector mos = new MeasOptionSelector(MeasOption, rec.det.MultiplicityParams);
INCCResult result = INCCAnalysisState.Lookup(mos);
result.CopyFrom(rec.mcr);
}
Stratum = new Stratum(rec.st); // the stratum from the results rec
}
public unsafe bool BuildMeasurement(INCCTransferFile itf, int num)
{
bool overwrite = NC.App.AppContext.OverwriteImportedDefs;
results_rec results = itf.results_rec_list[0];
meas_id id;
TransferUtils.Copy(results.meas_date, 0, id.meas_date, 0, INCC.DATE_TIME_LENGTH);
TransferUtils.Copy(results.meas_time, 0, id.meas_time, 0, INCC.DATE_TIME_LENGTH);
TransferUtils.Copy(results.filename, 0, id.filename, 0, INCC.FILE_NAME_LENGTH);
TransferUtils.Copy(results.results_detector_id, 0, id.results_detector_id, 0, INCC.MAX_DETECTOR_ID_LENGTH);
DateTime dt = INCC.DateTimeFrom(TransferUtils.str(id.meas_date, INCC.DATE_TIME_LENGTH), TransferUtils.str(id.meas_time, INCC.DATE_TIME_LENGTH));
// do not use content from last BuildDetector call, instead look up the detector on the pre-existing list
string detname = TransferUtils.str(id.results_detector_id, INCC.MAX_DETECTOR_ID_LENGTH);
Detector det = NC.App.DB.Detectors.GetItByDetectorId(detname);
if (det == null)
{
mlogger.TraceEvent(LogLevels.Error, 34087, "Unknown detector '{0}', not importing this measurement {1}", detname, dt.ToString("s"));
return false;
}
meas = new Measurement((AssaySelector.MeasurementOption)results.meas_option, mlogger);
// TODO: update detector details from this meas result, since there could be a difference
meas.MeasurementId.MeasDateTime = dt;
meas.MeasurementId.FileName = TransferUtils.str(id.filename, INCC.FILE_NAME_LENGTH);
meas.Detectors.Add(det); // in practice this is a list with one element, e.g. meas.Detector
TestParameters t = new TestParameters();
t.accSnglTestRateLimit = results.r_acc_sngl_test_rate_limit;
t.accSnglTestPrecisionLimit = results.r_acc_sngl_test_precision_limit;
t.accSnglTestOutlierLimit = results.r_acc_sngl_test_outlier_limit;
t.outlierTestLimit = results.r_outlier_test_limit;
t.bkgDoublesRateLimit = results.r_bkg_doubles_rate_limit;
t.bkgTriplesRateLimit = results.r_bkg_triples_rate_limit;
t.chiSquaredLimit = results.r_chisq_limit;
t.maxNumFailures = results.r_max_num_failures;
t.highVoltageTestLimit = results.r_high_voltage_test_limit;
t.normalBackupAssayTestLimit = results.r_normal_backup_assay_test_lim;
t.maxCyclesForOutlierTest = (uint)results.r_max_runs_for_outlier_test;
t.checksum = (results.r_checksum_test == 0.0 ? false : true);
t.accidentalsMethod = INCCAccidentalsMethod((int)results.results_accidentals_method);
meas.Tests.Copy(t);
NormParameters n = NC.App.DB.NormParameters.Get(detname);
meas.Norm.Copy(n);
BackgroundParameters b = NC.App.DB.BackgroundParameters.Get(detname);
meas.Background.Copy(b);
// DB write for these occurs at end of processing here
// Isotopics handled in this block
if (itf.isotopics_table.Count > 0)
{
string isoname = TransferUtils.str(results.item_isotopics_id, INCC.MAX_ISOTOPICS_ID_LENGTH);
NCCTransfer.isotopics_rec isotopics = itf.isotopics_table[0];
//bool first = true; // forgot why the code does this, to put the default in the map?
// foreach (LMTransfer.isotopics_rec ir in itf.istopics_table)
// {
AnalysisDefs.Isotopics iso;
// if (first)
iso = meas.Isotopics;
// else
// iso = new Isotopics();
// first = false;
iso.am_date = INCC.DateFrom(TransferUtils.str(isotopics.am_date, INCC.DATE_TIME_LENGTH));
iso.pu_date = INCC.DateFrom(TransferUtils.str(isotopics.pu_date, INCC.DATE_TIME_LENGTH));
iso.id = TransferUtils.str(isotopics.isotopics_id, INCC.MAX_ISOTOPICS_ID_LENGTH);
AnalysisDefs.Isotopics.SourceCode checksc = AnalysisDefs.Isotopics.SourceCode.OD;
string check = TransferUtils.str(isotopics.isotopics_source_code, INCC.ISO_SOURCE_CODE_LENGTH);
bool okparse = Enum.TryParse(check, true, out checksc);
iso.source_code = checksc;
iso.SetValueError(Isotope.am241, isotopics.am241, isotopics.am241_err);
iso.SetValueError(Isotope.pu238, isotopics.pu238, isotopics.pu238_err);
iso.SetValueError(Isotope.pu239, isotopics.pu239, isotopics.pu239_err);
iso.SetValueError(Isotope.pu240, isotopics.pu240, isotopics.pu240_err);
iso.SetValueError(Isotope.pu241, isotopics.pu241, isotopics.pu241_err);
iso.SetValueError(Isotope.pu242, isotopics.pu242, isotopics.pu242_err);
if (!NC.App.DB.Isotopics.Has(iso.id))
{
NC.App.DB.Isotopics.GetList().Add(iso);
mlogger.TraceEvent(LogLevels.Info, 34021, "Identified new isotopics {0}", iso.id);
}
else
{
if (overwrite)
{
NC.App.DB.Isotopics.Replace(iso);
mlogger.TraceEvent(LogLevels.Warning, 34022, "Replaced existing isotopics {0}", iso.id);
}
else
{
mlogger.TraceEvent(LogLevels.Warning, 34022, "Not replacing existing isotopics {0}", iso.id);
}
}
iso.modified = true;
}
AcquireParameters acq = meas.AcquireState;
acq.detector_id = det.Id.DetectorId;
acq.meas_detector_id = string.Copy(det.Id.DetectorId); // probably incorrect usage, but differnce is ambiguous in INCC5
acq.item_type = TransferUtils.str(results.results_item_type, INCC.MAX_ITEM_TYPE_LENGTH);
acq.qc_tests = TransferUtils.ByteBool(results.results_qc_tests);
acq.user_id = TransferUtils.str(results.user_id, INCC.CHAR_FIELD_LENGTH);
acq.num_runs = results.total_number_runs;
if (results.number_good_runs > 0)
acq.run_count_time = results.total_good_count_time / results.number_good_runs;
else
acq.run_count_time = results.total_good_count_time; // should be 0.0 by default for this special case
acq.MeasDateTime = meas.MeasurementId.MeasDateTime;
acq.error_calc_method = INCCErrorCalculationTechnique(results.error_calc_method);
acq.campaign_id = TransferUtils.str(results.results_campaign_id, INCC.MAX_CAMPAIGN_ID_LENGTH);
if (string.IsNullOrEmpty(acq.campaign_id))
acq.campaign_id = TransferUtils.str(results.results_inspection_number, INCC.MAX_CAMPAIGN_ID_LENGTH);
acq.comment = TransferUtils.str(results.comment, INCC.MAX_COMMENT_LENGTH);//"Original file name " + meas.MeasurementId.FileName;
string ending_comment_str = TransferUtils.str(results.ending_comment, INCC.MAX_COMMENT_LENGTH);
acq.ending_comment = !string.IsNullOrEmpty(acq.ending_comment_str);
acq.data_src = (ConstructedSource)results.data_source;
acq.well_config = (WellConfiguration)results.well_config;
acq.print = TransferUtils.ByteBool(results.results_print);
mlogger.TraceEvent(LogLevels.Verbose, 34000, "Building {0} measurement {1} '{2},{3}' from {2}", meas.MeasOption.PrintName(), num, acq.detector_id, acq.item_type, itf.Path);
if (itf.facility_table.Count > 0)
meas.AcquireState.facility = new INCCDB.Descriptor(string.Copy(itf.facility_table[0].id), string.Copy(itf.facility_table[0].desc));
if (itf.mba_table.Count > 0)
meas.AcquireState.mba = new INCCDB.Descriptor(string.Copy(itf.mba_table[0].id), string.Copy(itf.mba_table[0].desc));
if (itf.stratum_id_names_rec_table.Count > 0)
meas.AcquireState.stratum_id = new INCCDB.Descriptor(string.Copy(itf.stratum_id_names_rec_table[0].id), string.Copy(itf.stratum_id_names_rec_table[0].desc));
// stratum values
meas.Stratum = new Stratum();
meas.Stratum.bias_uncertainty = results.bias_uncertainty;
meas.Stratum.random_uncertainty = results.random_uncertainty;
meas.Stratum.relative_std_dev = results.relative_std_dev;
meas.Stratum.systematic_uncertainty = results.systematic_uncertainty;
INCCDB.Descriptor mtdesc = new INCCDB.Descriptor(string.Copy(acq.item_type), string.Empty);
if (!NC.App.DB.Materials.Has(mtdesc) || overwrite)
{
NC.App.DB.Materials.Update(mtdesc);
}
// prepare norm parms, should be done with a prior pass with the detector file, then this code looks it up in the collection set at this point in the processing
meas.Norm.currNormalizationConstant.v = results.normalization_constant;
meas.Norm.currNormalizationConstant.err = results.normalization_constant_err;
foreach (DescriptorPair dp in itf.facility_table)
{
INCCDB.Descriptor idesc = new INCCDB.Descriptor(string.Copy(dp.id), string.Copy(dp.desc));
if (!NC.App.DB.Facilities.Has(idesc) || overwrite)
{
idesc.modified = true;
NC.App.DB.Facilities.Update(idesc);
}
}
foreach (DescriptorPair dp in itf.mba_table)
{
INCCDB.Descriptor idesc = new INCCDB.Descriptor(string.Copy(dp.id), string.Copy(dp.desc));
if (!NC.App.DB.MBAs.Has(idesc) || overwrite)
{
idesc.modified = true;
NC.App.DB.MBAs.Update(idesc);
}
}
foreach (DescriptorPair dp in itf.stratum_id_names_rec_table)
{
INCCDB.Descriptor idesc = new INCCDB.Descriptor(string.Copy(dp.id), string.Copy(dp.desc));
if (meas.Stratum != null)
{
idesc.modified = true;
NC.App.DB.UpdateStratum(idesc, meas.Stratum); // creates it
NC.App.DB.AssociateStratum(det, idesc, meas.Stratum); // associates it with the detector
}
}
if (itf.item_id_table.Count > 0) // devnote: there should be only one item entry
{
ItemId item = new ItemId();
item.declaredMass = results.declared_mass;
item.declaredUMass = results.declared_u_mass;
item.length = results.length;
item.IOCode = TransferUtils.str(results.io_code, INCC.IO_CODE_LENGTH);
item.inventoryChangeCode = TransferUtils.str(results.inventory_change_code, INCC.INVENTORY_CHG_LENGTH);
item.isotopics = TransferUtils.str(results.item_isotopics_id, INCC.MAX_ISOTOPICS_ID_LENGTH);
item.stratum = TransferUtils.str(results.stratum_id, INCC.MAX_STRATUM_ID_LENGTH);
item.item = TransferUtils.str(results.item_id, INCC.MAX_ITEM_ID_LENGTH);
item.material = TransferUtils.str(results.results_item_type, INCC.MAX_ITEM_TYPE_LENGTH);
//copy measurement dates to item
item.pu_date = new DateTime(meas.Isotopics.pu_date.Ticks);
item.am_date = new DateTime(meas.Isotopics.am_date.Ticks);
item.modified = true;
List<ItemId> list = NC.App.DB.ItemIds.GetList();
bool flump = list.Exists(i => { return string.Compare(item.item, i.item, true) == 0; });
if (flump && overwrite)
{
list.Remove(item);
list.Add(item);
}
else
list.Add(item);
// fill in the acquire record from the item id
acq.ApplyItemId(item);
meas.MeasurementId.Item = new ItemId(item);
}
meas.INCCAnalysisState = new INCCAnalysisState();
INCCSelector sel = new INCCSelector(acq.detector_id, acq.item_type);
AnalysisMethods am;
bool found = NC.App.DB.DetectorMaterialAnalysisMethods.TryGetValue(sel, out am);
if (found)
{
meas.INCCAnalysisState.Methods = am;
meas.INCCAnalysisState.Methods.selector = sel;
}
else
{
mlogger.TraceEvent(LogLevels.Error, 34063, "No analysis methods for {0}, (calibration information is missing), creating placeholders", sel.ToString()); // devnote: can get missing paramters from the meas results for calib and verif below, so need to visit this condition after results processing below (newres.methodParams!) and reconstruct the calib parameters.
meas.INCCAnalysisState.Methods = new AnalysisMethods(mlogger);
meas.INCCAnalysisState.Methods.selector = sel;
}
// prepare analyzer params from sr params above
meas.AnalysisParams = new AnalysisDefs.CountingAnalysisParameters();
meas.AnalysisParams.Add(det.MultiplicityParams);
mlogger.TraceEvent(LogLevels.Verbose, 34030, "Transferring the {0} cycles", itf.run_rec_list.Count);
meas.InitializeContext();
meas.PrepareINCCResults(); // prepares INCCResults objects
ulong MaxBins = 0;
foreach (run_rec r in itf.run_rec_list)
{
ulong x= AddToCycleList(r, det);
if (x > MaxBins)
MaxBins = x;
}
for (int cf = 1; (itf.CFrun_rec_list != null) && (cf < itf.CFrun_rec_list.Length); cf++)
{
foreach (run_rec r in itf.CFrun_rec_list[cf])
{
AddToCycleList(r, det, cf);
}
}
// summarize the result in the result, if you know what I mean
MultiplicityCountingRes mcr = (MultiplicityCountingRes)meas.CountingAnalysisResults[det.MultiplicityParams];
for (int i = 0; i < 9; i++)
mcr.covariance_matrix[i] = results.covariance_matrix[i];
mcr.DeadtimeCorrectedRates.Singles.err = results.singles_err;
mcr.DeadtimeCorrectedRates.Doubles.err = results.doubles_err;
mcr.DeadtimeCorrectedRates.Triples.err = results.triples_err;
mcr.DeadtimeCorrectedRates.Singles.v = results.singles;
mcr.DeadtimeCorrectedRates.Doubles.v = results.doubles;
mcr.DeadtimeCorrectedRates.Triples.v = results.triples;
mcr.Scaler1Rate.v = results.scaler1;
mcr.Scaler2Rate.v = results.scaler2;
mcr.Scaler1Rate.err = results.scaler1_err;
mcr.Scaler2Rate.err = results.scaler2_err;
mcr.Scaler1.v = results.scaler1;
mcr.Scaler2.v = results.scaler2;
mcr.Scaler1.err = results.scaler1_err;
mcr.Scaler2.err = results.scaler2_err;
mcr.ASum = results.acc_sum;
mcr.RASum = results.reals_plus_acc_sum;
mcr.S1Sum = results.scaler1_sum;
mcr.S2Sum = results.scaler2_sum;
mcr.mass = results.declared_mass;
mcr.FA = det.MultiplicityParams.FA;
mcr.RAMult = TransferUtils.multarrayxfer(results.mult_reals_plus_acc_sum, INCC.MULTI_ARRAY_SIZE);
mcr.NormedAMult = TransferUtils.multarrayxfer(results.mult_acc_sum, INCC.MULTI_ARRAY_SIZE);
mcr.MaxBins = (ulong)Math.Max(mcr.RAMult.Length, mcr.NormedAMult.Length);
mcr.MinBins = (ulong)Math.Min(mcr.RAMult.Length, mcr.NormedAMult.Length);
mcr.RawDoublesRate.v = results.uncorrected_doubles;
mcr.RawDoublesRate.err = results.uncorrected_doubles_err;
mcr.singles_multi = results.singles_multi;
mcr.doubles_multi = results.doubles_multi;
mcr.triples_multi = results.triples_multi;
INCCResult result;
MeasOptionSelector mos = new MeasOptionSelector(meas.MeasOption, det.MultiplicityParams);
result = meas.INCCAnalysisState.Lookup(mos);
result.DeadtimeCorrectedRates.Singles.err = results.singles_err;
result.DeadtimeCorrectedRates.Doubles.err = results.doubles_err;
result.DeadtimeCorrectedRates.Triples.err = results.triples_err;
result.DeadtimeCorrectedRates.Singles.v = results.singles;
result.DeadtimeCorrectedRates.Doubles.v = results.doubles;
result.DeadtimeCorrectedRates.Triples.v = results.triples;
result.rates.RawRates.Scaler1s.v = results.scaler1;
result.rates.RawRates.Scaler2s.v = results.scaler2;
result.rates.RawRates.Scaler1s.err = results.scaler1_err;
result.rates.RawRates.Scaler2s.err = results.scaler2_err;
result.S1Sum = results.scaler1_sum;
result.S2Sum = results.scaler2_sum;
result.ASum = results.acc_sum;
result.RASum = results.reals_plus_acc_sum;
result.RAMult = TransferUtils.multarrayxfer(results.mult_reals_plus_acc_sum, INCC.MULTI_ARRAY_SIZE);
result.NormedAMult = TransferUtils.multarrayxfer(results.mult_acc_sum, INCC.MULTI_ARRAY_SIZE);
result.MaxBins = (ulong)Math.Max(result.RAMult.Length, result.NormedAMult.Length);
result.MinBins = (ulong)Math.Min(result.RAMult.Length, result.NormedAMult.Length);
mcr.RawDoublesRate.v = results.uncorrected_doubles;
mcr.RawDoublesRate.err = results.uncorrected_doubles_err;
result.singles_multi = results.singles_multi;
result.doubles_multi = results.doubles_multi;
result.triples_multi = results.triples_multi;
// hack expansion of Normed mult array to same length as Acc mult array on each cycle to accomodate TheoreticalOutlier calc array length bug
ExpandMaxBins(MaxBins, meas.Cycles, det.MultiplicityParams);
Bloat(MaxBins, mcr);
List<MeasurementMsg> msgs = meas.GetMessageList(det.MultiplicityParams);
// move the error messages
for (int i = 0; i < INCC.NUM_ERROR_MSG_CODES; i++)
{
int index = i * INCC.ERR_MSG_LENGTH;
string e = TransferUtils.str(results.error_msg_codes + index, INCC.ERR_MSG_LENGTH);
if (e.Length > 0)
meas.AddMessage(msgs, LogLevels.Error, 911, e, meas.MeasurementId.MeasDateTime);
}
// move the warning messages
for (int i = 0; i < INCC.NUM_WARNING_MSG_CODES; i++)
{
int index = i * INCC.ERR_MSG_LENGTH;
string w = TransferUtils.str(results.warning_msg_codes + index, INCC.ERR_MSG_LENGTH);
if (w.Length > 0)
meas.AddMessage(msgs, LogLevels.Warning, 411, w, meas.MeasurementId.MeasDateTime);
}
#region results transfer
INCCMethodResults imr;
bool got = meas.INCCAnalysisResults.TryGetINCCResults(det.MultiplicityParams, out imr); // only ever this single mkey for INCC5-style transfer import, (thankfully)
if (got)
imr.primaryMethod = OldToNewMethodId(results.primary_analysis_method);
// check these results against the meas.MeasOption expectation => seems to always be 1 - 1 with (opt, sr) -> results, and subresults only for verif and calib choice
// rates -> none,
// bkg -> bkg, norm -> bias, init src -> init src, prec -> prec,
// calib -> calib, 1 or more INCC methods on the methods submap
// verif -> 1 or more INCC methods on the methods submap
foreach (iresultsbase r in itf.method_results_list)
{
if (r is results_init_src_rec)
{
mlogger.TraceEvent(LogLevels.Verbose, 34041, ("Transferring initial source results"));
results_init_src_rec oldres = (results_init_src_rec)r;
INCCResults.results_init_src_rec newres = (INCCResults.results_init_src_rec)
meas.INCCAnalysisState.Lookup(new MeasOptionSelector(meas.MeasOption, det.MultiplicityParams), typeof(INCCResults.results_init_src_rec));
newres.mode = OldToNewBiasTestId(oldres.init_src_mode);
newres.pass = TransferUtils.PassCheck(oldres.init_src_pass_fail);
newres.init_src_id = TransferUtils.str(oldres.init_src_id, INCC.SOURCE_ID_LENGTH);
}
else if (r is results_bias_rec)
{
mlogger.TraceEvent(LogLevels.Verbose, 34042, ("Transferring normalization results"));
results_bias_rec oldres = (results_bias_rec)r;
INCCResults.results_bias_rec newres = (INCCResults.results_bias_rec)meas.INCCAnalysisState.Lookup(new MeasOptionSelector(meas.MeasOption, det.MultiplicityParams), typeof(INCCResults.results_bias_rec));
newres.pass = TransferUtils.PassCheck(oldres.bias_pass_fail);
newres.biasDblsRateExpect.v = oldres.bias_dbls_rate_expect;
newres.biasDblsRateExpectMeas.v = oldres.bias_dbls_rate_expect_meas;
newres.biasSnglsRateExpect.v = oldres.bias_sngls_rate_expect;
newres.biasSnglsRateExpectMeas.v = oldres.bias_sngls_rate_expect_meas;
newres.biasDblsRateExpect.err = oldres.bias_dbls_rate_expect_err;
newres.biasDblsRateExpectMeas.err = oldres.bias_dbls_rate_expect_meas_err;
newres.biasSnglsRateExpect.err = oldres.bias_sngls_rate_expect_err;
newres.biasSnglsRateExpectMeas.err = oldres.bias_sngls_rate_expect_meas_err;
newres.newNormConstant.v = oldres.new_norm_constant;
newres.newNormConstant.err = oldres.new_norm_constant_err;
newres.measPrecision = oldres.meas_precision;
newres.requiredMeasSeconds = oldres.required_meas_seconds;
newres.requiredPrecision = oldres.required_precision;
newres.mode = OldToNewBiasTestId(oldres.results_bias_mode);
newres.sourceId = TransferUtils.str(oldres.bias_source_id, INCC.SOURCE_ID_LENGTH);
// NEXT: for init src and bias, results norm values transferred to meas.norm
}
else if (r is results_precision_rec)
{
mlogger.TraceEvent(LogLevels.Verbose, 34043, ("Transferring precision results"));
results_precision_rec oldres = (results_precision_rec)r;
INCCResults.results_precision_rec newres =
(INCCResults.results_precision_rec)meas.INCCAnalysisState.Lookup(new MeasOptionSelector(meas.MeasOption, det.MultiplicityParams), typeof(INCCResults.results_precision_rec));
newres.chiSqLowerLimit = oldres.chi_sq_lower_limit;
newres.chiSqUpperLimit = oldres.chi_sq_upper_limit;
newres.precChiSq = oldres.prec_chi_sq;
newres.precSampleVar = oldres.prec_sample_var;
newres.precTheoreticalVar = oldres.prec_theoretical_var;
newres.pass = TransferUtils.PassCheck(oldres.prec_pass_fail);
}
else
{
if (r is results_cal_curve_rec)
{
// need to look up in existing map and see if it is there and then create and load it if not
mlogger.TraceEvent(LogLevels.Verbose, 34050, ("Transferring method results for " + r.GetType().ToString()));
results_cal_curve_rec oldres = (results_cal_curve_rec)r;
INCCMethodResults.results_cal_curve_rec newres =
(INCCMethodResults.results_cal_curve_rec)meas.INCCAnalysisResults.LookupMethodResults(det.MultiplicityParams, meas.INCCAnalysisState.Methods.selector, AnalysisMethod.CalibrationCurve, true);
newres.pu240e_mass = new Tuple(oldres.cc_pu240e_mass, oldres.cc_pu240e_mass_err);
newres.pu_mass = new Tuple(oldres.cc_pu_mass, oldres.cc_pu_mass_err);
newres.dcl_pu240e_mass = oldres.cc_dcl_pu240e_mass;
newres.dcl_pu_mass = oldres.cc_dcl_pu_mass;
newres.dcl_minus_asy_pu_mass = new Tuple(oldres.cc_dcl_minus_asy_pu_mass, oldres.cc_dcl_minus_asy_pu_mass_err);
newres.dcl_minus_asy_pu_mass_pct = oldres.cc_dcl_minus_asy_pu_mass_pct;
newres.pass = TransferUtils.PassCheck(oldres.cc_pass_fail);
newres.dcl_u_mass = oldres.cc_dcl_u_mass;
newres.length = oldres.cc_length;
newres.heavy_metal_content = oldres.cc_heavy_metal_content;
newres.heavy_metal_correction = oldres.cc_heavy_metal_correction;
newres.heavy_metal_corr_singles = new Tuple(oldres.cc_heavy_metal_corr_singles, oldres.cc_heavy_metal_corr_singles_err);
newres.heavy_metal_corr_doubles = new Tuple(oldres.cc_heavy_metal_corr_doubles, oldres.cc_heavy_metal_corr_doubles_err);
newres.methodParams.heavy_metal_corr_factor = oldres.cc_heavy_metal_corr_factor_res;
newres.methodParams.heavy_metal_reference = oldres.cc_heavy_metal_reference_res;
// newres.methodParams.cev.lower_mass_limit = oldres.cc_lower_mass_limit_res;
// newres.methodParams.cev.upper_mass_limit = oldres.cc_upper_mass_limit_res;
newres.methodParams.percent_u235 = oldres.cc_percent_u235_res;
newres.methodParams.cev.a = oldres.cc_a_res; newres.methodParams.cev.b = oldres.cc_b_res;
newres.methodParams.cev.c = oldres.cc_c_res; newres.methodParams.cev.d = oldres.cc_d_res;
newres.methodParams.cev.var_a = oldres.cc_var_a_res; newres.methodParams.cev.var_b = oldres.cc_var_b_res;
newres.methodParams.cev.var_c = oldres.cc_var_c_res; newres.methodParams.cev.var_d = oldres.cc_var_d_res;
newres.methodParams.cev.setcovar(Coeff.a,Coeff.b,oldres.cc_covar_ab_res);
newres.methodParams.cev._covar[0, 2] = oldres.cc_covar_ac_res;
newres.methodParams.cev._covar[0, 3] = oldres.cc_covar_ad_res;
newres.methodParams.cev._covar[1, 2] = oldres.cc_covar_bc_res;
newres.methodParams.cev._covar[1, 3] = oldres.cc_covar_bd_res;
newres.methodParams.cev._covar[2, 3] = oldres.cc_covar_cd_res;
newres.methodParams.cev.cal_curve_equation = (INCCAnalysisParams.CurveEquation)oldres.cc_cal_curve_equation;
newres.methodParams.CalCurveType = (INCCAnalysisParams.CalCurveType)oldres.cc_cal_curve_type_res;
newres.methodParams.cev.sigma_x = oldres.cc_sigma_x_res;
}
else if (r is results_known_alpha_rec)
{
// need to look up in existing map and see if it is there and then create and load it if not
mlogger.TraceEvent(LogLevels.Verbose, 34051, ("Transferring method results for " + r.GetType().ToString()));
results_known_alpha_rec oldres = (results_known_alpha_rec)r;
INCCMethodResults.results_known_alpha_rec newres =
(INCCMethodResults.results_known_alpha_rec)meas.INCCAnalysisResults.LookupMethodResults(det.MultiplicityParams, meas.INCCAnalysisState.Methods.selector, AnalysisMethod.KnownA, true);
newres.corr_doubles.v = oldres.ka_corr_doubles;
newres.corr_doubles.err = oldres.ka_corr_doubles_err;
newres.mult = oldres.ka_mult;
newres.alphaK = oldres.ka_alpha;
newres.mult_corr_doubles = new Tuple(oldres.ka_mult_corr_doubles, oldres.ka_mult_corr_doubles_err);
newres.pu240e_mass = new Tuple(oldres.ka_pu240e_mass, oldres.ka_pu240e_mass_err);
newres.pu_mass = new Tuple(oldres.ka_pu_mass, oldres.ka_pu_mass_err);
newres.dcl_pu240e_mass = oldres.ka_dcl_pu240e_mass;
newres.dcl_pu_mass = oldres.ka_dcl_pu_mass;
newres.dcl_minus_asy_pu_mass = new Tuple(oldres.ka_dcl_minus_asy_pu_mass, oldres.ka_dcl_minus_asy_pu_mass_err);
newres.dcl_minus_asy_pu_mass_pct = oldres.ka_dcl_minus_asy_pu_mass_pct;
newres.pass = TransferUtils.PassCheck(oldres.ka_pass_fail);
newres.dcl_u_mass = oldres.ka_dcl_u_mass;
newres.length = oldres.ka_length;
newres.heavy_metal_content = oldres.ka_heavy_metal_content;
newres.heavy_metal_correction = oldres.ka_heavy_metal_correction;
newres.corr_singles = new Tuple(oldres.ka_corr_singles, oldres.ka_corr_singles_err);
newres.corr_doubles = new Tuple(oldres.ka_corr_doubles, oldres.ka_corr_doubles_err);
newres.corr_factor = oldres.ka_corr_factor;
newres.dry_alpha_or_mult_dbls = oldres.ka_dry_alpha_or_mult_dbls;
newres.upper_corr_factor_limit = oldres.ka_upper_corr_factor_limit_res;
newres.lower_corr_factor_limit = oldres.ka_lower_corr_factor_limit_res;
newres.methodParams = new INCCAnalysisParams.known_alpha_rec();
newres.methodParams.alpha_wt = oldres.ka_alpha_wt_res;
newres.methodParams.heavy_metal_corr_factor = oldres.ka_heavy_metal_corr_factor_res;
newres.methodParams.heavy_metal_reference = oldres.ka_heavy_metal_reference_res;
newres.methodParams.k = oldres.ka_k_res;
newres.methodParams.known_alpha_type = (INCCAnalysisParams.KnownAlphaVariant)oldres.ka_known_alpha_type_res;
newres.methodParams.lower_corr_factor_limit = oldres.ka_lower_corr_factor_limit_res;
newres.methodParams.upper_corr_factor_limit = oldres.ka_upper_corr_factor_limit_res;
newres.methodParams.rho_zero = oldres.ka_rho_zero_res;
newres.methodParams.ring_ratio.cal_curve_equation = (INCCAnalysisParams.CurveEquation)oldres.ka_ring_ratio_equation_res;
newres.methodParams.ring_ratio.a = oldres.ka_ring_ratio_a_res;
newres.methodParams.ring_ratio.b = oldres.ka_ring_ratio_b_res;
newres.methodParams.ring_ratio.c = oldres.ka_ring_ratio_c_res;
newres.methodParams.ring_ratio.d = oldres.ka_ring_ratio_d_res;
newres.methodParams.cev.a = oldres.ka_a_res;
newres.methodParams.cev.b = oldres.ka_b_res;
newres.methodParams.cev.var_a = oldres.ka_var_a_res;
newres.methodParams.cev.var_b= oldres.ka_var_b_res;
newres.methodParams.cev.sigma_x = oldres.ka_sigma_x_res;
newres.methodParams.cev.setcovar(Coeff.a, Coeff.b, oldres.ka_covar_ab_res);
newres.methodParams.cev.lower_mass_limit = oldres.ka_lower_corr_factor_limit_res;
newres.methodParams.cev.upper_mass_limit = oldres.ka_upper_corr_factor_limit_res;
}
else if (r is results_multiplicity_rec)
{
mlogger.TraceEvent(LogLevels.Verbose, 34052, ("Transferring method results for " + r.GetType().ToString()));
results_multiplicity_rec oldres = (results_multiplicity_rec)r;
INCCMethodResults.results_multiplicity_rec newres =
(INCCMethodResults.results_multiplicity_rec)meas.INCCAnalysisResults.LookupMethodResults(det.MultiplicityParams, meas.INCCAnalysisState.Methods.selector, AnalysisMethod.Multiplicity, true);
newres.solve_efficiency_choice = (INCCAnalysisParams.MultChoice)oldres.mul_solve_efficiency_res;
newres.pass = TransferUtils.PassCheck(oldres.mul_pass_fail);
newres.efficiencyComputed.v = oldres.mul_efficiency; newres.efficiencyComputed.err = oldres.mul_efficiency_err;
newres.mult.v = oldres.mul_mult; newres.mult.err = oldres.mul_mult_err;
newres.alphaK.v = oldres.mul_alpha; newres.alphaK.err = oldres.mul_alpha_err;
newres.corr_factor.v = oldres.mul_corr_factor; newres.corr_factor.err = oldres.mul_corr_factor_err;
newres.pu240e_mass.v = oldres.mul_pu240e_mass; newres.pu240e_mass.err = oldres.mul_pu240e_mass_err;
newres.pu_mass.v = oldres.mul_pu_mass; newres.pu_mass.err = oldres.mul_pu_mass_err;
newres.dcl_minus_asy_pu_mass.v = oldres.mul_dcl_minus_asy_pu_mass; newres.dcl_minus_asy_pu_mass.err = oldres.mul_dcl_minus_asy_pu_mass_err;
newres.dcl_pu240e_mass = oldres.mul_dcl_pu240e_mass;
newres.dcl_pu_mass = oldres.mul_dcl_pu_mass;
newres.dcl_minus_asy_pu_mass_pct = oldres.mul_dcl_minus_asy_pu_mass_pct;
newres.methodParams = new INCCAnalysisParams.multiplicity_rec();
newres.methodParams.sf_rate = oldres.mul_sf_rate_res;
newres.methodParams.vs1 = oldres.mul_vs1_res;
newres.methodParams.vs2 = oldres.mul_vs2_res;
newres.methodParams.vs3 = oldres.mul_vs3_res;
newres.methodParams.vi1 = oldres.mul_vi1_res;
newres.methodParams.vi2 = oldres.mul_vi2_res;
newres.methodParams.vi3 = oldres.mul_vi3_res;
newres.methodParams.a = oldres.mul_a_res;
newres.methodParams.b = oldres.mul_b_res;
newres.methodParams.c = oldres.mul_b_res;
newres.methodParams.sigma_x = oldres.mul_sigma_x_res;
newres.methodParams.alpha_weight = oldres.mul_alpha_weight_res;
newres.methodParams.multEffCorFactor = oldres.mul_corr_factor;
}
else if (r is results_truncated_mult_rec)
{
mlogger.TraceEvent(LogLevels.Verbose, 34053, ("Transferring method results for " + r.GetType().ToString()));
results_truncated_mult_rec oldres = (results_truncated_mult_rec)r;
INCCMethodResults.results_truncated_mult_rec newres =
(INCCMethodResults.results_truncated_mult_rec)meas.INCCAnalysisResults.LookupMethodResults(det.MultiplicityParams, meas.INCCAnalysisState.Methods.selector, AnalysisMethod.TruncatedMultiplicity, true);
newres.k.pass = TransferUtils.PassCheck(oldres.tm_k_pass_fail);
newres.bkg.Singles.v = oldres.tm_bkg_singles;
newres.bkg.Singles.err = oldres.tm_bkg_singles_err;
newres.bkg.Zeros.v = oldres.tm_bkg_zeros;
newres.bkg.Zeros.err = oldres.tm_bkg_zeros_err;
newres.bkg.Ones.v = oldres.tm_bkg_ones;
newres.bkg.Ones.err = oldres.tm_bkg_ones_err;
newres.bkg.Twos.v = oldres.tm_bkg_twos;
newres.bkg.Twos.err = oldres.tm_bkg_twos_err;
newres.net.Singles.v = oldres.tm_net_singles;
newres.net.Singles.err = oldres.tm_net_singles_err;
newres.net.Zeros.v = oldres.tm_net_zeros;
newres.net.Zeros.err = oldres.tm_net_zeros_err;
newres.net.Ones.v = oldres.tm_net_ones;
newres.net.Ones.err = oldres.tm_net_ones_err;
newres.net.Twos.v = oldres.tm_net_twos;
newres.net.Twos.err = oldres.tm_net_twos_err;
newres.k.alpha.v = oldres.tm_k_alpha;
newres.k.alpha.err = oldres.tm_k_alpha_err;
newres.k.pu_mass.v = oldres.tm_k_pu_mass;
newres.k.pu_mass.err = oldres.tm_k_pu_mass_err;
newres.k.pu240e_mass.v = oldres.tm_k_pu240e_mass;
newres.k.pu240e_mass.err = oldres.tm_k_pu240e_mass_err;
newres.k.dcl_minus_asy_pu_mass.v = oldres.tm_k_dcl_minus_asy_pu_mass;
newres.k.dcl_minus_asy_pu_mass.err = oldres.tm_k_dcl_minus_asy_pu_mass_err;
newres.s.alpha.v = oldres.tm_s_alpha;
newres.s.alpha.err = oldres.tm_s_alpha_err;
newres.s.pu_mass.v = oldres.tm_s_pu_mass;
newres.s.pu_mass.err = oldres.tm_s_pu_mass_err;
newres.s.pu240e_mass.v = oldres.tm_s_pu240e_mass;
newres.s.pu240e_mass.err = oldres.tm_s_pu240e_mass_err;
newres.s.dcl_minus_asy_pu_mass.v = oldres.tm_s_dcl_minus_asy_pu_mass;
newres.s.dcl_minus_asy_pu_mass.err = oldres.tm_s_dcl_minus_asy_pu_mass_err;
newres.methodParams.a = oldres.tm_a_res;
newres.methodParams.b = oldres.tm_b_res;
newres.methodParams.known_eff = (oldres.tm_known_eff_res == 0 ? false : true);
newres.methodParams.solve_eff = (oldres.tm_solve_eff_res == 0 ? false : true);
}
else if (r is results_known_m_rec)
{
// dev note: untested
mlogger.TraceEvent(LogLevels.Verbose, 34054, ("Transferring method results for " + r.GetType().ToString()));
results_known_m_rec oldres = (results_known_m_rec)r;
INCCMethodResults.results_known_m_rec newres =
(INCCMethodResults.results_known_m_rec)meas.INCCAnalysisResults.LookupMethodResults(det.MultiplicityParams, meas.INCCAnalysisState.Methods.selector, AnalysisMethod.KnownM, true);
newres.pu_mass = new Tuple(oldres.km_pu_mass, oldres.km_pu_mass_err);
newres.pu240e_mass = new Tuple(oldres.km_pu240e_mass, oldres.km_pu240e_mass);
newres.alpha = oldres.km_alpha;
newres.mult = oldres.km_mult;
newres.dcl_minus_asy_pu_mass = new Tuple(oldres.km_dcl_minus_asy_pu_mass, oldres.km_dcl_minus_asy_pu_mass_err);
newres.pu239e_mass = oldres.km_pu240e_mass;
newres.dcl_pu240e_mass = oldres.km_dcl_pu240e_mass;
newres.dcl_pu_mass = oldres.km_dcl_pu_mass;
newres.dcl_minus_asy_pu_mass_pct = oldres.km_dcl_minus_asy_pu_mass_pct;
newres.pass = TransferUtils.PassCheck(oldres.km_pass_fail);
newres.methodParams.b = oldres.km_b_res;
newres.methodParams.c = oldres.km_c_res;
newres.methodParams.sf_rate = oldres.km_sf_rate_res;
newres.methodParams.sigma_x = oldres.km_sigma_x_res;
newres.methodParams.vs1 = oldres.km_vs1_res;
newres.methodParams.vi1 = oldres.km_vi1_res;
newres.methodParams.vs2 = oldres.km_vs2_res;
newres.methodParams.vi2 = oldres.km_vi2_res;
}
else if (r is results_add_a_source_rec)
{
// dev note: untested
mlogger.TraceEvent(LogLevels.Verbose, 34055, ("Transferring method results for " + r.GetType().ToString()));
results_add_a_source_rec oldres = (results_add_a_source_rec)r;
INCCMethodResults.results_add_a_source_rec newres =
(INCCMethodResults.results_add_a_source_rec)meas.INCCAnalysisResults.LookupMethodResults(det.MultiplicityParams, meas.INCCAnalysisState.Methods.selector, AnalysisMethod.KnownM, true);
newres.pu_mass = new Tuple(oldres.ad_pu_mass, oldres.ad_pu_mass_err);
newres.pu240e_mass = new Tuple(oldres.ad_pu240e_mass, oldres.ad_pu240e_mass);
newres.dcl_minus_asy_pu_mass = new Tuple(oldres.ad_dcl_minus_asy_pu_mass, oldres.ad_dcl_minus_asy_pu_mass_err);
newres.dcl_pu240e_mass = oldres.ad_dcl_pu240e_mass;
newres.dcl_pu_mass = oldres.ad_dcl_pu_mass;
newres.dcl_minus_asy_pu_mass_pct = oldres.ad_dcl_minus_asy_pu_mass_pct;
newres.pass = TransferUtils.PassCheck(oldres.ad_pass_fail);
newres.dzero_cf252_doubles = oldres.ad_dzero_cf252_doubles;
newres.sample_avg_cf252_doubles.v = oldres.ad_sample_avg_cf252_doubles;
newres.sample_avg_cf252_doubles.err = oldres.ad_sample_avg_cf252_doubles_err;
newres.corr_doubles.v = oldres.ad_corr_doubles;
newres.corr_doubles.err = oldres.ad_corr_doubles_err;
newres.delta.v = oldres.ad_delta;
newres.delta.err = oldres.ad_delta_err;
newres.corr_factor.v = oldres.ad_corr_factor;
newres.corr_factor.err = oldres.ad_corr_factor_err;
newres.sample_cf252_ratio = TransferUtils.Copy(oldres.ad_sample_cf252_ratio, INCC.MAX_ADDASRC_POSITIONS);
newres.sample_cf252_doubles = Tuple.MakeArray(
vals: TransferUtils.Copy(oldres.ad_sample_cf252_doubles, INCC.MAX_ADDASRC_POSITIONS),
errs: TransferUtils.Copy(oldres.ad_sample_cf252_doubles_err, INCC.MAX_ADDASRC_POSITIONS));
newres.tm_doubles_bkg.v = oldres.ad_tm_doubles_bkg;
newres.tm_uncorr_doubles.v = oldres.ad_tm_uncorr_doubles;
newres.tm_corr_doubles.v = oldres.ad_corr_doubles;
newres.tm_doubles_bkg.err = oldres.ad_tm_doubles_bkg_err;
newres.tm_uncorr_doubles.err = oldres.ad_tm_uncorr_doubles_err;
newres.tm_corr_doubles.err = oldres.ad_corr_doubles_err;
newres.methodParams.cev.a = oldres.ad_a_res; newres.methodParams.cev.b = oldres.ad_b_res;
newres.methodParams.cev.c = oldres.ad_c_res; newres.methodParams.cev.d = oldres.ad_d_res;
newres.methodParams.cev.var_a = oldres.ad_var_a_res; newres.methodParams.cev.var_b = oldres.ad_var_b_res;
newres.methodParams.cev.var_c = oldres.ad_var_c_res; newres.methodParams.cev.var_d = oldres.ad_var_d_res;
newres.methodParams.cev.setcovar(Coeff.a, Coeff.b, oldres.ad_covar_ab_res);
newres.methodParams.cev._covar[0, 2] = oldres.ad_covar_ac_res;
newres.methodParams.cev._covar[0, 3] = oldres.ad_covar_ad_res;
newres.methodParams.cev._covar[1, 2] = oldres.ad_covar_bc_res;
newres.methodParams.cev._covar[1, 3] = oldres.ad_covar_bd_res;
newres.methodParams.cev._covar[2, 3] = oldres.ad_covar_cd_res;
newres.methodParams.cev.cal_curve_equation = (INCCAnalysisParams.CurveEquation)oldres.ad_add_a_source_equation;
newres.methodParams.cev.sigma_x = oldres.ad_sigma_x_res;
newres.methodParams.cf.a = oldres.ad_cf_a_res; newres.methodParams.cf.b = oldres.ad_cf_b_res;
newres.methodParams.cf.c = oldres.ad_cf_c_res; newres.methodParams.cf.d = oldres.ad_cf_d_res;
newres.methodParams.dzero_avg = oldres.ad_dzero_avg_res;
newres.methodParams.num_runs = oldres.ad_num_runs_res;
newres.methodParams.tm_dbls_rate_upper_limit = oldres.ad_tm_dbls_rate_upper_limit_res;
newres.methodParams.tm_weighting_factor = oldres.ad_tm_weighting_factor_res;
newres.methodParams.use_truncated_mult = (oldres.ad_use_truncated_mult_res == 0 ? false : true);
newres.methodParams.dzero_ref_date = INCC.DateFrom(TransferUtils.str(oldres.ad_dzero_ref_date_res, INCC.DATE_TIME_LENGTH));
newres.methodParams.position_dzero = TransferUtils.Copy(oldres.ad_position_dzero_res, INCC.MAX_ADDASRC_POSITIONS);
// devnote: the original methodParams dcl_mass, doubles, min, max not preserved in INCC5 aas result rec
}
else if (r is results_curium_ratio_rec)
{
// dev note: untested
mlogger.TraceEvent(LogLevels.Verbose, 34056, ("Transferring method results for " + r.GetType().ToString()));
results_curium_ratio_rec oldres = (results_curium_ratio_rec)r;
INCCMethodResults.results_curium_ratio_rec newres = (INCCMethodResults.results_curium_ratio_rec)
meas.INCCAnalysisResults.LookupMethodResults(det.MultiplicityParams, meas.INCCAnalysisState.Methods.selector, AnalysisMethod.CuriumRatio, true);
newres.pu.pu240e_mass = new Tuple(oldres.cr_pu240e_mass, oldres.cr_pu240e_mass_err);
newres.pu.mass = new Tuple(oldres.cr_pu_mass, oldres.cr_pu_mass_err);
newres.pu.dcl_mass = oldres.cr_dcl_pu_mass;
newres.pu.dcl_minus_asy_mass = new Tuple(oldres.cr_dcl_minus_asy_pu_mass, oldres.cr_dcl_minus_asy_pu_mass_err);
newres.pu.dcl_minus_asy_mass_pct = oldres.cr_dcl_minus_asy_pu_mass_pct;
newres.pu.dcl_minus_asy_pu_mass = new Tuple(oldres.cr_dcl_minus_asy_pu_mass, oldres.cr_dcl_minus_asy_pu_mass_err);
newres.pu.dcl_minus_asy_pu_mass_pct = oldres.cr_dcl_minus_asy_pu_mass_pct;
newres.pu.pass = TransferUtils.PassCheck(oldres.cr_pu_pass_fail);
newres.u.mass = new Tuple(oldres.cr_u_mass, oldres.cr_u_mass_err);
newres.u.dcl_mass = oldres.cr_dcl_u_mass_res;
newres.u.dcl_minus_asy_mass = new Tuple(oldres.cr_dcl_minus_asy_u_mass, oldres.cr_dcl_minus_asy_u_mass_err);
newres.u.dcl_minus_asy_mass_pct = oldres.cr_dcl_minus_asy_u_mass_pct;
newres.u.pass = TransferUtils.PassCheck(oldres.cr_u_pass_fail);
newres.u235.mass = new Tuple(oldres.cr_u235_mass, oldres.cr_u235_mass_err);
newres.u235.dcl_mass = oldres.cr_dcl_u235_mass_res;
newres.u235.dcl_minus_asy_mass = new Tuple(oldres.cr_dcl_minus_asy_u235_mass, oldres.cr_dcl_minus_asy_u235_mass_err);
newres.u235.dcl_minus_asy_mass_pct = oldres.cr_dcl_minus_asy_u235_mass_pct;
newres.cm_mass = new Tuple(oldres.cr_cm_mass, oldres.cr_cm_mass_err);
newres.methodParams2.cm_pu_ratio = new Tuple(oldres.cr_cm_pu_ratio, oldres.cr_cm_pu_ratio_err);
newres.cm_pu_ratio_decay_corr = new Tuple(oldres.cr_cm_pu_ratio_decay_corr, oldres.cr_cm_pu_ratio_decay_corr_err);
newres.methodParams2.cm_pu_ratio_date = INCC.DateFrom(TransferUtils.str(oldres.cr_cm_pu_ratio_date, INCC.DATE_TIME_LENGTH));
newres.cm_u_ratio_decay_corr = new Tuple(oldres.cr_cm_u_ratio_decay_corr, oldres.cr_cm_u_ratio_decay_corr_err);
newres.methodParams2.cm_u_ratio_date = INCC.DateFrom(TransferUtils.str(oldres.cr_cm_pu_ratio_date, INCC.DATE_TIME_LENGTH));
newres.methodParams2.pu_half_life = oldres.cr_pu_half_life;
newres.methodParams2.cm_id_label = TransferUtils.str(oldres.cr_cm_id_label, INCC.MAX_ITEM_ID_LENGTH);
newres.methodParams2.cm_id = TransferUtils.str(oldres.cr_cm_id, INCC.MAX_ITEM_ID_LENGTH);
newres.methodParams2.cm_input_batch_id = TransferUtils.str(oldres.cr_cm_input_batch_id, INCC.MAX_ITEM_ID_LENGTH);
newres.methodParams.cev.a = oldres.cr_a_res; newres.methodParams.cev.b = oldres.cr_b_res;
newres.methodParams.cev.c = oldres.cr_c_res; newres.methodParams.cev.d = oldres.cr_d_res;
newres.methodParams.cev.var_a = oldres.cr_var_a_res; newres.methodParams.cev.var_b = oldres.cr_var_b_res;
newres.methodParams.cev.var_c = oldres.cr_var_c_res; newres.methodParams.cev.var_d = oldres.cr_var_d_res;
newres.methodParams.cev.setcovar(Coeff.a,Coeff.b,oldres.cr_covar_ab_res);
newres.methodParams.cev._covar[0, 2] = oldres.cr_covar_ac_res;
newres.methodParams.cev._covar[0, 3] = oldres.cr_covar_ad_res;
newres.methodParams.cev._covar[1, 2] = oldres.cr_covar_bc_res;
newres.methodParams.cev._covar[1, 3] = oldres.cr_covar_bd_res;
newres.methodParams.cev._covar[2, 3] = oldres.cr_covar_cd_res;
newres.methodParams.cev.cal_curve_equation = (INCCAnalysisParams.CurveEquation)oldres.cr_curium_ratio_equation;
newres.methodParams.cev.sigma_x = oldres.cr_sigma_x_res;
newres.methodParams.curium_ratio_type = OldToNewCRVariants(oldres.curium_ratio_type_res);
}
else if (r is results_active_passive_rec) // NEXT: confusion with combined, it's the same as Active internally? expand and study
{
mlogger.TraceEvent(LogLevels.Verbose, 34057, ("Transferring method results for " + r.GetType().ToString()));
results_active_passive_rec oldres = (results_active_passive_rec)r;
INCCMethodResults.results_active_passive_rec newres =
(INCCMethodResults.results_active_passive_rec)meas.INCCAnalysisResults.LookupMethodResults(det.MultiplicityParams, meas.INCCAnalysisState.Methods.selector, AnalysisMethod.ActivePassive, true);
newres.pass = TransferUtils.PassCheck(oldres.ap_pass_fail);
newres.k.v = oldres.ap_k; newres.k.err = oldres.ap_k_err;
newres.k0.v = oldres.ap_k0;
newres.k1.v = oldres.ap_k1; newres.k1.err = oldres.ap_k1_err;
newres.u235_mass.v = oldres.ap_u235_mass; newres.u235_mass.err = oldres.ap_u235_mass_err;
newres.dcl_minus_asy_u235_mass.v = oldres.ap_dcl_minus_asy_u235_mass; newres.dcl_minus_asy_u235_mass.err = oldres.ap_dcl_minus_asy_u235_mass_err;
newres.dcl_u235_mass = oldres.ap_dcl_u235_mass;
newres.dcl_minus_asy_u235_mass_pct = oldres.ap_dcl_minus_asy_u235_mass_pct;
newres.methodParams = new INCCAnalysisParams.active_passive_rec();
newres.methodParams.cev.a = oldres.ap_a_res; newres.methodParams.cev.b = oldres.ap_b_res;
newres.methodParams.cev.c = oldres.ap_c_res; newres.methodParams.cev.d = oldres.ap_d_res;
newres.methodParams.cev.var_a = oldres.ap_var_a_res; newres.methodParams.cev.var_b = oldres.ap_var_b_res;
newres.methodParams.cev.var_c = oldres.ap_var_c_res; newres.methodParams.cev.var_d = oldres.ap_var_d_res;
newres.methodParams.cev.setcovar(Coeff.a, Coeff.b, oldres.ap_covar_ab_res);
newres.methodParams.cev._covar[0, 2] = oldres.ap_covar_ac_res;
newres.methodParams.cev._covar[0, 3] = oldres.ap_covar_ad_res;
newres.methodParams.cev._covar[1, 2] = oldres.ap_covar_bc_res;
newres.methodParams.cev._covar[1, 3] = oldres.ap_covar_bd_res;
newres.methodParams.cev._covar[2, 3] = oldres.ap_covar_cd_res;
newres.methodParams.cev.cal_curve_equation = (INCCAnalysisParams.CurveEquation)oldres.ap_active_passive_equation;
newres.methodParams.cev.sigma_x = oldres.ap_sigma_x_res;
newres.delta_doubles.v = oldres.ap_delta_doubles;
newres.delta_doubles.err = oldres.ap_delta_doubles_err;
}
else if (r is results_active_rec)
{
mlogger.TraceEvent(LogLevels.Verbose, 34058, ("Transferring method results for " + r.GetType().ToString()));
results_active_rec oldres = (results_active_rec)r;
INCCMethodResults.results_active_rec newres =
(INCCMethodResults.results_active_rec)meas.INCCAnalysisResults.LookupMethodResults(det.MultiplicityParams, meas.INCCAnalysisState.Methods.selector, AnalysisMethod.Active, true);
newres.pass = TransferUtils.PassCheck(oldres.act_pass_fail);
newres.k.v = oldres.act_k; newres.k.err = oldres.act_k_err;
newres.k0.v = oldres.act_k0;
newres.k1.v = oldres.act_k1; newres.k1.err = oldres.act_k1_err;
newres.u235_mass.v = oldres.act_u235_mass; newres.u235_mass.err = oldres.act_u235_mass_err;
newres.dcl_minus_asy_u235_mass.v = oldres.act_dcl_minus_asy_u235_mass; newres.dcl_minus_asy_u235_mass.err = oldres.act_dcl_minus_asy_u235_mass_err;
newres.dcl_u235_mass = oldres.act_dcl_u235_mass;
newres.dcl_minus_asy_u235_mass_pct = oldres.act_dcl_minus_asy_u235_mass_pct;
newres.methodParams = new INCCAnalysisParams.active_rec();
newres.methodParams.cev.a = oldres.act_a_res; newres.methodParams.cev.b = oldres.act_b_res;
newres.methodParams.cev.c = oldres.act_c_res; newres.methodParams.cev.d = oldres.act_d_res;
newres.methodParams.cev.var_a = oldres.act_var_a_res; newres.methodParams.cev.var_b = oldres.act_var_b_res;
newres.methodParams.cev.var_c = oldres.act_var_c_res; newres.methodParams.cev.var_d = oldres.act_var_d_res;
newres.methodParams.cev.setcovar(Coeff.a,Coeff.b,oldres.act_covar_ab_res);
newres.methodParams.cev._covar[0, 2] = oldres.act_covar_ac_res;
newres.methodParams.cev._covar[0, 3] = oldres.act_covar_ad_res;
newres.methodParams.cev._covar[1, 2] = oldres.act_covar_bc_res;
newres.methodParams.cev._covar[1, 3] = oldres.act_covar_bd_res;
newres.methodParams.cev._covar[2, 3] = oldres.act_covar_cd_res;
newres.methodParams.cev.cal_curve_equation = (INCCAnalysisParams.CurveEquation)oldres.act_active_equation;
newres.methodParams.cev.sigma_x = oldres.act_sigma_x_res;
}
else if (r is results_active_mult_rec)
{
mlogger.TraceEvent(LogLevels.Verbose, 34059, ("Transferring method results for " + r.GetType().ToString()));
results_active_mult_rec oldres = (results_active_mult_rec)r;
INCCMethodResults.results_active_mult_rec newres =
(INCCMethodResults.results_active_mult_rec)meas.INCCAnalysisResults.LookupMethodResults(det.MultiplicityParams, meas.INCCAnalysisState.Methods.selector, AnalysisMethod.ActiveMultiplicity, true);
newres.methodParams = new INCCAnalysisParams.active_mult_rec();
newres.methodParams.vf1 = oldres.am_vf1_res;
newres.methodParams.vf2 = oldres.am_vf2_res;
newres.methodParams.vf3 = oldres.am_vf3_res;
newres.methodParams.vt1 = oldres.am_vt1_res;
newres.methodParams.vt2 = oldres.am_vt2_res;
newres.methodParams.vt3 = oldres.am_vt2_res;
newres.mult.v = oldres.am_mult;
newres.mult.err = oldres.am_mult_err;
}
else if (r is results_collar_rec)
{
mlogger.TraceEvent(LogLevels.Verbose, 34060, ("Transferring method results for " + r.GetType().ToString()));
results_collar_rec oldres = (results_collar_rec)r;
INCCMethodResults.results_collar_rec newres =
(INCCMethodResults.results_collar_rec)meas.INCCAnalysisResults.LookupMethodResults(det.MultiplicityParams, meas.INCCAnalysisState.Methods.selector, AnalysisMethod.Collar, true);
newres.u235_mass.v = oldres.col_u235_mass; newres.u235_mass.err = oldres.col_u235_mass_err;
newres.percent_u235 = oldres.col_percent_u235;
newres.total_u_mass = oldres.col_total_u_mass;
newres.k0.v = oldres.col_k0; newres.k0.err = oldres.col_k0_err;
newres.k1.v = oldres.col_k1; newres.k1.err = oldres.col_k1_err;
newres.k2.v = oldres.col_k2; newres.k2.err = oldres.col_k2_err;
newres.k3.v = oldres.col_k3; newres.k3.err = oldres.col_k3_err;
newres.k4.v = oldres.col_k4; newres.k4.err = oldres.col_k4_err;
newres.k5.v = oldres.col_k5; newres.k5.err = oldres.col_k5_err;
newres.source_id = TransferUtils.str(oldres.col_source_id, INCC.SOURCE_ID_LENGTH);
newres.total_corr_fact.v = oldres.col_total_corr_fact; newres.total_corr_fact.err = oldres.col_total_corr_fact_err;
newres.corr_doubles.v = oldres.col_corr_doubles; newres.corr_doubles.err = oldres.col_corr_doubles_err;
newres.dcl_length.v = oldres.col_dcl_length; newres.dcl_length.err = oldres.col_dcl_length_err;
newres.dcl_total_u235.v = oldres.col_dcl_total_u235; newres.dcl_total_u235.err = oldres.col_dcl_total_u235_err;
newres.dcl_total_u238.v = oldres.col_dcl_total_u238; newres.dcl_total_u238.err = oldres.col_dcl_total_u238_err;
newres.dcl_total_rods = oldres.col_dcl_total_rods;
newres.dcl_total_poison_rods = oldres.col_dcl_total_poison_rods;
newres.dcl_poison_percent.v = oldres.col_dcl_poison_percent;
newres.dcl_poison_percent.err = oldres.col_dcl_poison_percent_err;
newres.dcl_minus_asy_u235_mass_pct = oldres.col_dcl_minus_asy_u235_mass_pct;
newres.dcl_minus_asy_u235_mass.v = oldres.col_dcl_minus_asy_u235_mass;
newres.dcl_minus_asy_u235_mass.err = oldres.col_dcl_minus_asy_u235_mass_err;
newres.methodParamsC.cev.a = oldres.col_a_res; newres.methodParamsC.cev.b = oldres.col_b_res;
newres.methodParamsC.cev.c = oldres.col_c_res; newres.methodParamsC.cev.d = oldres.col_d_res;
newres.methodParamsC.cev.var_a = oldres.col_var_a_res; newres.methodParamsC.cev.var_b = oldres.col_var_b_res;
newres.methodParamsC.cev.var_c = oldres.col_var_c_res; newres.methodParamsC.cev.var_d = oldres.col_var_d_res;
newres.methodParamsC.cev.setcovar(Coeff.a,Coeff.b,oldres.col_covar_ab_res);
newres.methodParamsC.cev._covar[0, 2] = oldres.col_covar_ac_res;
newres.methodParamsC.cev._covar[0, 3] = oldres.col_covar_ad_res;
newres.methodParamsC.cev._covar[1, 2] = oldres.col_covar_bc_res;
newres.methodParamsC.cev._covar[1, 3] = oldres.col_covar_bd_res;
newres.methodParamsC.cev._covar[2, 3] = oldres.col_covar_cd_res;
newres.methodParamsC.cev.cal_curve_equation = (INCCAnalysisParams.CurveEquation)oldres.col_collar_equation;
newres.methodParamsC.cev.sigma_x = oldres.col_sigma_x_res;
newres.methodParamsC.poison_absorption_fact[0] = oldres.col_poison_absorption_fact_res;
newres.methodParamsC.poison_rod_a[0] = new Tuple(oldres.col_poison_rod_a_res, oldres.col_poison_rod_a_err_res);
newres.methodParamsC.poison_rod_b[0] = new Tuple(oldres.col_poison_rod_b_res, oldres.col_poison_rod_b_err_res);
newres.methodParamsC.poison_rod_c[0] = new Tuple(oldres.col_poison_rod_c_res, oldres.col_poison_rod_c_err_res);
newres.methodParamsC.collar_mode = (oldres.col_collar_mode == 0 ? false : true);
newres.methodParamsC.number_calib_rods = (int)oldres.col_number_calib_rods_res;
newres.methodParamsC.poison_rod_type[0] = TransferUtils.str(oldres.col_poison_rod_type_res, INCC.MAX_ROD_TYPE_LENGTH);
newres.methodParamsC.u_mass_corr_fact_a.v = oldres.col_u_mass_corr_fact_a_res; newres.methodParamsC.u_mass_corr_fact_a.err = oldres.col_u_mass_corr_fact_a_err_res;
newres.methodParamsC.u_mass_corr_fact_b.v = oldres.col_u_mass_corr_fact_b_res; newres.methodParamsC.u_mass_corr_fact_b.err = oldres.col_u_mass_corr_fact_b_err_res;
newres.methodParamsC.sample_corr_fact.v = oldres.col_sample_corr_fact_res; newres.methodParamsC.sample_corr_fact.err = oldres.col_sample_corr_fact_err_res;
newres.methodParamsDetector.collar_mode = (oldres.col_collar_mode == 0 ? false : true);
newres.methodParamsDetector.reference_date = INCC.DateFrom(TransferUtils.str(oldres.col_reference_date_res, INCC.DATE_TIME_LENGTH));
newres.methodParamsDetector.relative_doubles_rate = oldres.col_relative_doubles_rate_res;
newres.methodParamsK5.k5_mode = (oldres.col_collar_mode == 0 ? false : true);
newres.methodParamsK5.k5_item_type = TransferUtils.str(oldres.col_collar_item_type, INCC.MAX_ITEM_TYPE_LENGTH);
newres.methodParamsK5.k5 = Copy(oldres.collar_k5_res, oldres.collar_k5_err_res, INCC.MAX_COLLAR_K5_PARAMETERS);
newres.methodParamsK5.k5_checkbox = TransferUtils.Copy(oldres.collar_k5_checkbox_res, INCC.MAX_COLLAR_K5_PARAMETERS);
for (int i = 0; i < INCC.MAX_COLLAR_K5_PARAMETERS; i++)
{
int index = i * INCC.MAX_K5_LABEL_LENGTH;
newres.methodParamsK5.k5_label[i] = TransferUtils.str(oldres.collar_k5_label_res + index, INCC.MAX_K5_LABEL_LENGTH);
}
CollarItemId cid = new CollarItemId(TransferUtils.str(results.item_id, INCC.MAX_ITEM_ID_LENGTH));
cid.length = new Tuple(newres.dcl_length);
cid.total_u235 = new Tuple(newres.dcl_total_u235);
cid.total_u238 = new Tuple(newres.dcl_total_u238);
cid.total_rods = newres.dcl_total_rods;
cid.total_poison_rods = newres.dcl_total_poison_rods;
cid.poison_percent = new Tuple(newres.dcl_poison_percent);
cid.rod_type = newres.methodParamsC.poison_rod_type[0];
cid.modified = true;
List<CollarItemId> list = NC.App.DB.CollarItemIds.GetList();
bool glump = list.Exists(i => { return string.Compare(cid.item_id, i.item_id, true) == 0; });
if (glump && overwrite)
{
list.Remove(cid);
list.Add(cid);
}
else list.Add(cid);
}
else if (r is results_de_mult_rec)
{
mlogger.TraceEvent(LogLevels.Verbose, 34061, ("Transferring method results for " + r.GetType().ToString()));
results_de_mult_rec oldres = (results_de_mult_rec)r;
INCCMethodResults.results_de_mult_rec newres =
(INCCMethodResults.results_de_mult_rec)meas.INCCAnalysisResults.LookupMethodResults(det.MultiplicityParams, meas.INCCAnalysisState.Methods.selector, AnalysisMethod.DUAL_ENERGY_MULT_SAVE_RESTORE, true);
newres.meas_ring_ratio = oldres.de_meas_ring_ratio;
newres.energy_corr_factor = oldres.de_energy_corr_factor;
newres.interpolated_neutron_energy = oldres.de_interpolated_neutron_energy;
newres.methodParams.detector_efficiency = TransferUtils.Copy(oldres.de_detector_efficiency_res, INCC.MAX_DUAL_ENERGY_ROWS);
newres.methodParams.inner_outer_ring_ratio = TransferUtils.Copy(oldres.de_inner_outer_ring_ratio_res, INCC.MAX_DUAL_ENERGY_ROWS);
newres.methodParams.neutron_energy = TransferUtils.Copy(oldres.de_neutron_energy_res, INCC.MAX_DUAL_ENERGY_ROWS);
newres.methodParams.relative_fission = TransferUtils.Copy(oldres.de_relative_fission_res, INCC.MAX_DUAL_ENERGY_ROWS);
newres.methodParams.inner_ring_efficiency = oldres.de_inner_ring_efficiency_res;
newres.methodParams.outer_ring_efficiency = oldres.de_outer_ring_efficiency_res;
}
else if (r is results_tm_bkg_rec)
{
mlogger.TraceEvent(LogLevels.Warning, 34062, ("Transferring method results for " + r.GetType().ToString()));
results_tm_bkg_rec oldres = (results_tm_bkg_rec)r; // todo: tm bkg handling design incomplete, these values are attached to bkg measurements when the truncated flag is enabled
INCCMethodResults.results_tm_bkg_rec newres =
(INCCMethodResults.results_tm_bkg_rec)meas.INCCAnalysisResults.LookupMethodResults(det.MultiplicityParams, meas.INCCAnalysisState.Methods.selector, AnalysisMethod.None, true);
newres.methodParams.Singles.v = oldres.results_tm_singles_bkg;
newres.methodParams.Singles.err = oldres.results_tm_singles_bkg_err;
newres.methodParams.Zeros.v = oldres.results_tm_zeros_bkg;
newres.methodParams.Zeros.err = oldres.results_tm_zeros_bkg_err;
newres.methodParams.Ones.v = oldres.results_tm_ones_bkg;
newres.methodParams.Ones.err = oldres.results_tm_ones_bkg_err;
newres.methodParams.Twos.v = oldres.results_tm_twos_bkg;
newres.methodParams.Twos.err = oldres.results_tm_twos_bkg_err;
}
else
{
mlogger.TraceEvent(LogLevels.Warning, 34040, ("todo: Transferring method results for " + r.GetType().ToString())); // todo: complete the list
}
}
}
#endregion results transfer
// dev note: here is where the detector tree creation and replacement with restore_replace_detector_structs occurs in the original code
// todo: based on overwrite flag, replace det-dependent classes, the analysis_methods: (none-map) and each (det,mat) -> calib from results class instances
#region Meas&Results
AnalysisDefs.holdup_config_rec hc = new AnalysisDefs.holdup_config_rec();
hc.glovebox_id = TransferUtils.str(results.results_glovebox_id, INCC.MAX_GLOVEBOX_ID_LENGTH);
hc.num_columns = results.results_num_columns;
hc.num_rows = results.results_num_rows;
hc.distance = results.results_distance;
meas.AcquireState.glovebox_id = hc.glovebox_id;
// this is a good place to create the general results_rec
INCCResults.results_rec xres = new INCCResults.results_rec(meas);
meas.INCCAnalysisResults.TradResultsRec = xres;
// oddball entries in need of preservation
xres.total_good_count_time = results.total_good_count_time;
xres.total_number_runs = results.total_number_runs;
xres.primary = imr.primaryMethod;
xres.net_drum_weight = results.net_drum_weight;
xres.completed = (results.completed != 0 ? true : false);
xres.db_version = results.db_version;
xres.hc = hc;
xres.original_meas_date = INCC.DateFrom(TransferUtils.str(results.original_meas_date, INCC.DATE_TIME_LENGTH));
// NEXT: copy move passive and active meas id's here
long mid = meas.Persist();
// save the warning and error messages from the results here, these rode on the results rec in INCC5
NC.App.DB.AddAnalysisMessages(msgs, mid);
// Store off Params
NC.App.DB.UpdateDetector(det);
NC.App.DB.NormParameters.Set(det, meas.Norm); // might have been saved in earlier step already
NC.App.DB.BackgroundParameters.Set(det, meas.Background);
INCCDB.AcquireSelector acqsel = new INCCDB.AcquireSelector(det, acq.item_type, acq.MeasDateTime);
if (overwrite)
{
NC.App.DB.ReplaceAcquireParams(acqsel, acq);
}
else
NC.App.DB.AddAcquireParams(acqsel, acq); // gotta add it to the global map, then push it to the DB
if (meas.Tests != null) // added only if not found on the list
NC.App.DB.TestParameters.Set(meas.Tests);
NC.App.DB.Isotopics.SetList(); // new style de 'mouser'!
//NC.App.DB.CompositeIsotopics.SetList();// next:NYI
NC.App.DB.ItemIds.SetList(); // This writes any new items ids to the DB
NC.App.DB.CollarItemIds.SetList(); // so does this
//Loop over measurement cycles
NC.App.DB.AddCycles(meas.Cycles, det.MultiplicityParams, mid);
//Store off Params
// todo: complete table design and creation/update here, still have issues with collar and curium ratio results
// get results based on meas option, (Calib and Verif have method results, others do not), update into DB here
IEnumerator iter = meas.INCCAnalysisResults.GetMeasSelectorResultsEnumerator();
while (iter.MoveNext()) // only one result indexer is present when doing an INCC5 transfer
{
MeasOptionSelector moskey = (MeasOptionSelector)iter.Current;
INCCResult ir = meas.INCCAnalysisResults[moskey];
// ir contains the measurement option-specific results: empty for rates and holdup, and also empty for calib and verif, the method-focused analyses,
// but values are present for initial, normalization, precision, and should be present for background for the tm bkg results
switch (meas.MeasOption)
{
case AssaySelector.MeasurementOption.background:
if (meas.Background.TMBkgParams.ComputeTMBkg)
mlogger.TraceEvent(LogLevels.Warning, 82010, "Background truncated multiplicity"); // todo: present the tm bkg results on m.Background
break;
case AssaySelector.MeasurementOption.initial:
case AssaySelector.MeasurementOption.normalization:
case AssaySelector.MeasurementOption.precision:
{
ElementList els = ir.ToDBElementList();
ParamsRelatedBackToMeasurement ar = new ParamsRelatedBackToMeasurement(ir.Table);
long resid = ar.Create(mid, els);
mlogger.TraceEvent(LogLevels.Verbose, 34103, string.Format("Preserving {0} as {1}", ir.Table, resid));
}
break;
case AssaySelector.MeasurementOption.verification:
case AssaySelector.MeasurementOption.calibration:
{
INCCMethodResults imrs;
bool have = meas.INCCAnalysisResults.TryGetINCCResults(moskey.MultiplicityParams, out imrs);
if (have) // should be true for verification and calibration
{
if (imrs.ContainsKey(meas.INCCAnalysisState.Methods.selector))
{
// we've got a distinct detector id and material type on the methods, so that is the indexer here
Dictionary<AnalysisMethod, INCCMethodResult> amimr = imrs[meas.INCCAnalysisState.Methods.selector];
// now get an enumerator over the map of method results
Dictionary<AnalysisMethod, INCCMethodResult>.Enumerator ai = amimr.GetEnumerator();
while (ai.MoveNext())
{
if (ai.Current.Key.IsNone())
continue;
INCCMethodResult _imr = ai.Current.Value;
// insert this into the DB under the current meas key
try
{
ElementList els = _imr.ToDBElementList(); // also sets table property, gotta do it first
ParamsRelatedBackToMeasurement ar = new ParamsRelatedBackToMeasurement(_imr.Table);
long resid = ar.Create(mid, els);
do
{
long resmid = ar.CreateMethod(resid, mid, _imr.methodParams.ToDBElementList());
mlogger.TraceEvent(LogLevels.Verbose, 34101, string.Format("Preserving {0} as {1},{2}", _imr.Table, resmid, resid));
} while (_imr.methodParams.Pump > 0);
}
catch (Exception e)
{
mlogger.TraceEvent(LogLevels.Warning, 34102, "Results processing error {0} {1}", _imr.ToString(), e.Message);
}
}
} else
mlogger.TraceEvent(LogLevels.Error, 34102, "Results missing for {0}", meas.INCCAnalysisState.Methods.selector.ToString());
}
}
break;
case AssaySelector.MeasurementOption.rates:
case AssaySelector.MeasurementOption.holdup:
case AssaySelector.MeasurementOption.unspecified:
default: // nothing new to present with these
break;
}
}
#endregion Meas&Results
// todo: handle well config setting with bkg here;
return true;
}
/// <summary>
/// Do the third phase . . .
/// From calc_res.cpp,
/// </summary>
public static void CalculateResults(this Measurement meas)
{
IEnumerator iter = meas.CountingAnalysisResults.GetMultiplicityEnumerator();
while (iter.MoveNext())
{
Multiplicity mkey = (Multiplicity)((KeyValuePair<SpecificCountingAnalyzerParams, object>)(iter.Current)).Key;
if (NC.App.Opstate.IsAbortRequested)
return;
INCCResult results;
MeasOptionSelector ar = new MeasOptionSelector(meas.MeasOption, mkey);
bool found = meas.INCCAnalysisResults.TryGetValue(ar, out results);
if (!found)
{
meas.AddErrorMessage("No results available", 10151, mkey);
return;
}
/* if using measure to precision, and max # runs reached, then add warning message indicating actual precision reached. */
if (meas.AcquireState.acquire_type == AcquireConvergence.DoublesPrecision)
{
if (results.rates.DTCRates.DoublesRate != 0.0)
{
double error = results.rates.DTCRates.Doubles.err / results.rates.DTCRates.DoublesRate * 100.0;
if (error > meas.AcquireState.meas_precision)
{
meas.AddWarningMessage("Measurement doubles error = " + error.ToString("F2"), 10126, mkey);
}
}
}
else if (meas.AcquireState.acquire_type == AcquireConvergence.TriplesPrecision)
{
if (results.rates.DTCRates.TriplesRate != 0.0)
{
double error = results.rates.DTCRates.Triples.err / results.rates.DTCRates.TriplesRate * 100.0;
if (error > meas.AcquireState.meas_precision)
{
meas.AddWarningMessage("Measurement triples error = " + error.ToString("F2"), 10127, mkey);
}
}
}
if (meas.MeasOption == AssaySelector.MeasurementOption.rates) // Doug Requirement #2
{
// for a rates only measurement, all done!
meas.Logger.TraceEvent(NCCReporter.LogLevels.Info, 10180, "Rates Only measurement complete");
continue;
}
try
{
switch (meas.MeasOption)
{
case AssaySelector.MeasurementOption.background: // Doug Requirement #3
// a bkg is an average over a bunch of cycles with only the deadtime correction applied,
// but note the variant for Truncated Mult background, where an additional calculation is made
if (results.rates.DTCRates.DoublesRate > meas.Tests.bkgDoublesRateLimit)
meas.AddWarningMessage("Background doubles rate " + results.rates.DTCRates.DoublesRate + " greater than " + meas.Tests.bkgDoublesRateLimit, 10141, mkey);
if (results.rates.DTCRates.TriplesRate > meas.Tests.bkgTriplesRateLimit)
meas.AddWarningMessage("Background triples rate " + results.rates.DTCRates.TriplesRate + " greater than " + meas.Tests.bkgTriplesRateLimit, 10142, mkey);
// dev note: this is a background measurement per se, so we copy the results to the Background class and store the entire thing that way
// NEXT: Need to account for Active bkg beginning here.
if (Integ.GetCurrentAcquireParams().well_config == WellConfiguration.Active)// Is an active acquisition.
{
meas.Background.INCCActive.CopyFrom(results.rates.DeadtimeCorrectedRates);
}
else
meas.Background.CopyFrom(results.rates);
// maybe if (INCCAnalysisState.Methods.Has(AnalysisMethod.TruncatedMultiplicity))
if (meas.Background.TMBkgParams.ComputeTMBkg)
// Trunc Mult Bkg step, calc_tm_rates, sets TM bkg rates on Measurement.Background
INCCAnalysis.calc_tm_rates(mkey, results, meas, meas.Background.TMBkgParams, meas.Detector.Id.SRType);
meas.Logger.TraceEvent(NCCReporter.LogLevels.Info, 10181, "Background measurement complete");
break;
case AssaySelector.MeasurementOption.initial:
INCCResults.results_init_src_rec results_init_src = (INCCResults.results_init_src_rec)results;
meas.Logger.TraceEvent(NCCReporter.LogLevels.Info, 10182, "Calculating Initial source measurement results");
bool funhappy = INCCAnalysis.initial_source_meas(meas, mkey, RatesAdjustments.DeadtimeCorrected);
if (!funhappy || !results_init_src.pass)
{
meas.AddWarningMessage("Initial source measurement failed", 10123, mkey);
}
// on fail, only the relevant results_init_src_rec is saved
// on pass, the normalization parameters are modified with the results_init_src_rec results, and so both are udpated.
break;
case AssaySelector.MeasurementOption.normalization:
meas.Logger.TraceEvent(NCCReporter.LogLevels.Info, 10183, "Calculating Normalization measurement results");
bool happyfun = INCCAnalysis.bias_test(meas, mkey, RatesAdjustments.DeadtimeCorrected);
if (!happyfun)
{
meas.AddWarningMessage("Normalization test -- data quality is inadequate", 10124, mkey);
}
break;
case AssaySelector.MeasurementOption.precision:
meas.Logger.TraceEvent(NCCReporter.LogLevels.Info, 10184, "Calculating Precision measurement results");
bool charmyfun = INCCAnalysis.precision_test(meas, mkey, RatesAdjustments.DeadtimeCorrected);
if (!charmyfun)
{
meas.AddWarningMessage("Precision test failed", 10125, mkey);
}
break;
case AssaySelector.MeasurementOption.calibration: // from calc_res.cpp
if (meas.INCCAnalysisState.Methods.CalibrationAnalysisSelected())
{
meas.Logger.TraceEvent(NCCReporter.LogLevels.Info, 10185, "Calculating Calibration measurement results");
// dev note: since the analysis routines have similar signatures, design a class OK?
if (meas.INCCAnalysisState.Methods.Has(AnalysisMethod.CalibrationCurve))
{
meas.Logger.TraceEvent(NCCReporter.LogLevels.Info, 10191, "Calculating " + AnalysisMethod.CalibrationCurve.FullName() + " measurement results");
// get the current results_cal_curve_rec
INCCMethodResults.results_cal_curve_rec ccres = (INCCMethodResults.results_cal_curve_rec)
meas.INCCAnalysisResults.LookupMethodResults(mkey, meas.INCCAnalysisState.Methods.selector, AnalysisMethod.CalibrationCurve, true);
INCCAnalysisParams.cal_curve_rec cal_curve = (INCCAnalysisParams.cal_curve_rec)meas.INCCAnalysisState.Methods.GetMethodParameters(AnalysisMethod.CalibrationCurve);
ccres.methodParams = new INCCAnalysisParams.cal_curve_rec(cal_curve);
double pu_mass = ccres.pu_mass.v;
meas.Isotopics.UpdateDeclaredPuMass(meas.MeasDate, ref pu_mass, INCCAnalysis.INCCParity);
ccres.pu_mass.v = pu_mass;
ccres.pu_mass.err = 0.0;
ccres.pu240e_mass.err = 0.0;
double pu240e_mass = ccres.pu240e_mass.v;
meas.Isotopics.calc_pu240e(pu_mass, out pu240e_mass, meas);
ccres.pu240e_mass.v = pu240e_mass;
}
if (meas.INCCAnalysisState.Methods.Has(AnalysisMethod.KnownA))
{
meas.Logger.TraceEvent(NCCReporter.LogLevels.Info, 10192, "Calculating " + AnalysisMethod.KnownA.FullName() + " calibration results");
INCCMethodResults.results_known_alpha_rec kares = INCCAnalysis.CalculateKnownAlpha(mkey, results.rates, meas, RatesAdjustments.DeadtimeCorrected);
if (kares == null)
{
meas.AddErrorMessage("Known alpha analysis error", 10153, mkey);
}
else
{
kares.pu_mass.v = meas.AcquireState.mass;
double pu_mass = kares.pu_mass.v;
meas.Isotopics.UpdateDeclaredPuMass(meas.MeasDate, ref pu_mass, INCCAnalysis.INCCParity);
kares.pu_mass.v = pu_mass;
kares.pu_mass.err = 0.0;
kares.pu240e_mass.err = 0.0;
double pu240e_mass = kares.pu240e_mass.v;
meas.Isotopics.calc_pu240e(pu_mass, out pu240e_mass, meas);
kares.pu240e_mass.v = pu240e_mass;
}
}
if (meas.INCCAnalysisState.Methods.Has(AnalysisMethod.Active))
{
meas.Logger.TraceEvent(NCCReporter.LogLevels.Info, 10192, "Arranging " + AnalysisMethod.Active.FullName() + " calibration results");
INCCSelector sel = new INCCSelector(meas.INCCAnalysisState.Methods.selector);
INCCAnalysisParams.active_rec act;
INCCAnalysisParams.INCCMethodDescriptor surr = meas.INCCAnalysisState.Methods.GetMethodParameters(AnalysisMethod.Active);
if (surr == null)
{
act = new INCCAnalysisParams.active_rec();
meas.INCCAnalysisState.Methods.AddMethod(AnalysisMethod.Active, act);
}
else
{
act = (INCCAnalysisParams.active_rec)surr;
}
INCCMethodResults.results_active_rec res;
res = (INCCMethodResults.results_active_rec)meas.INCCAnalysisResults.LookupMethodResults(mkey, sel, AnalysisMethod.Active, true);
// all this does is copy the declared mass over to the results, WTF
res.u235_mass.v = meas.AcquireState.mass;
}
if (meas.INCCAnalysisState.Methods.Has(AnalysisMethod.AddASource))
{
meas.Logger.TraceEvent(NCCReporter.LogLevels.Info, 10152, "Calculating " + AnalysisMethod.AddASource.FullName() + " calibration results");
INCCSelector sel = new INCCSelector(meas.INCCAnalysisState.Methods.selector);
INCCAnalysisParams.add_a_source_rec aas;
INCCMethodResults.results_add_a_source_rec acres;
INCCAnalysisParams.INCCMethodDescriptor surr = meas.INCCAnalysisState.Methods.GetMethodParameters(AnalysisMethod.AddASource);
if (surr == null)
{
aas = new INCCAnalysisParams.add_a_source_rec();
meas.INCCAnalysisState.Methods.AddMethod(AnalysisMethod.AddASource, aas);
}
else
{
aas = (INCCAnalysisParams.add_a_source_rec)surr;
}
acres = (INCCMethodResults.results_add_a_source_rec)meas.INCCAnalysisResults.LookupMethodResults(mkey, sel, AnalysisMethod.AddASource, true);
acres.pu_mass.v = meas.AcquireState.mass;
// update_declared_pu_mass
double pu_mass = acres.pu_mass.v;
meas.Isotopics.UpdateDeclaredPuMass(meas.MeasDate, ref pu_mass, INCCAnalysis.INCCParity);
acres.pu_mass.v = pu_mass;
acres.pu_mass.err = 0.0;
acres.pu240e_mass.err = 0.0;
double pu240e_mass = acres.pu240e_mass.v;
meas.Isotopics.calc_pu240e(pu_mass, out pu240e_mass, meas);
acres.pu240e_mass.v = pu240e_mass;
}
}
else
{
meas.AddErrorMessage("No Calibration analysis methods selected", 10153, mkey);
}
break;
case AssaySelector.MeasurementOption.verification:
// see INCC calc_asy.cpp
// dev note: check for item in the item table, make sure to place this item id on the MeasurementId.item property
if (!string.IsNullOrEmpty(meas.AcquireState.item_id))
{
meas.Logger.TraceEvent(NCCReporter.LogLevels.Info, 10194, "Using item id '{0}'", meas.AcquireState.item_id);
}
else
meas.Logger.TraceEvent(NCCReporter.LogLevels.Verbose, 10194, "No item id");
if (meas.INCCAnalysisState.Methods.VerificationAnalysisSelected())
{
meas.Logger.TraceEvent(NCCReporter.LogLevels.Info, 10186, "Calculating {0} measurement results", meas.MeasOption.PrintName());
meas.CalculateVerificationResults(mkey, results);
}
else
{
meas.AddErrorMessage("No analysis methods selected", 10156, mkey);
}
break;
case AssaySelector.MeasurementOption.holdup: // NEXT: Hold-up held up, implement it #35
meas.Logger.TraceEvent(NCCReporter.LogLevels.Error, 10187, "Holdup analysis unsupported");
break;
}
}
catch (Exception e)
{
meas.Logger.TraceException(e);
}
}
}
protected Section ConstructReportSection(INCCTestDataSection section, MeasOptionSelector moskey, Detector det)
{
INCCTestDataStyle sec = null;
try
{
switch (section)
{
case INCCTestDataSection.CyclesWithMultiplicityDistributions:
sec = new INCCTestDataStyle(null, 0, INCCStyleSection.ReportSection.MultiColumn);
//Singles 1st Scaler 2nd Scaler Reals + Accidentals Accidentals
int[] crdwidths = new int[] {10, 10, 10, 10, 10 };
int[] srawidths = new int[] { 12, 12 };
foreach (Cycle cyc in meas.Cycles)
{
// if no results on the cycle, these map indexers throw
if (cyc.CountingAnalysisResults.GetResultsCount(typeof(Multiplicity)) > 0) // if no results on the cycle, these map indexers throw
{
MultiplicityCountingRes mcr = (MultiplicityCountingRes)cyc.CountingAnalysisResults[moskey.MultiplicityParams];
sec.AddColumnRow(
new ulong[] { (ulong)mcr.Totals, (ulong)mcr.Scaler1.v, (ulong)mcr.Scaler2.v, (ulong)mcr.RASum, (ulong)mcr.ASum },
crdwidths);
int minbin, maxbin;
minbin = Math.Min(mcr.RAMult.Length, mcr.NormedAMult.Length);
maxbin = Math.Max(mcr.RAMult.Length, mcr.NormedAMult.Length);
sec.AddOne(maxbin);
for (int i = 0; i < minbin; i++)
sec.AddColumnRow(new ulong[] { mcr.RAMult[i], mcr.NormedAMult[i] }, srawidths);
for (int i = minbin; i < maxbin; i++) // check for uneven column
{
ulong[] potential = new ulong[2];
if (i < mcr.RAMult.Length)
potential[0] = mcr.RAMult[i];
if (i < mcr.NormedAMult.Length)
potential[1] = mcr.NormedAMult[i];
sec.AddColumnRow(potential, srawidths);
}
}
}
break;
default:
break;
}
}
catch (Exception e)
{
ctrllog.TraceException(e);
}
return sec;
}
/// <summary>
/// Save in the database the method results and copies of the current method parameters.
/// The table entries are related back to the measurement.
/// The method results are preserved in the results_\<method table name\> and \<method table name\>_m DB tables.
/// </summary>
/// <param name="m">The measurement to preserve</param>
/// <param name="moskey">The option selector+multiplicity key for the method results map</param>
static void SaveMethodResultsForThisMeasurement(this Measurement m, MeasOptionSelector moskey)
{
// DB.Measurements ms = new DB.Measurements();
long mid = m.MeasurementId.UniqueId;
INCCMethodResults imrs;
bool gotten = m.INCCAnalysisResults.TryGetINCCResults(moskey.MultiplicityParams, out imrs);
if (gotten && imrs.Count > 0) // expected to be true for verification and calibration
{
//The distinct detector id and material type index the methods and the method results
Dictionary<AnalysisMethod, INCCMethodResult> amimr = imrs[m.INCCAnalysisState.Methods.selector];
// now get an enumerator over the map of method results
Dictionary<AnalysisMethod, INCCMethodResult>.Enumerator ai = amimr.GetEnumerator();
while (ai.MoveNext())
{
INCCMethodResult imr = ai.Current.Value;
DB.ElementList els = imr.ToDBElementList(); // generates the Table property content too
DB.ParamsRelatedBackToMeasurement ar = new DB.ParamsRelatedBackToMeasurement(imr.Table);
long resid = ar.Create(mid, els); // save the method results in the relevant results table
do
{
long mresid = ar.CreateMethod(resid, mid, imr.methodParams.ToDBElementList()); // save the initial method params (the copy rides on the results)
m.Logger.TraceEvent(NCCReporter.LogLevels.Verbose, 34104, string.Format("Method results {0} preserved ({1}, {2})", imr.Table, resid, mresid));
} while (imr.methodParams.Pump > 0);
}
}
}
internal static unsafe iresultsbase MoveBias(INCCResults ir, MeasOptionSelector mos)
{
results_bias_rec res = new results_bias_rec();
INCCResult results;
bool found = ir.TryGetValue(mos, out results);
if (found)
{
INCCResults.results_bias_rec t = (INCCResults.results_bias_rec)results;
res.results_bias_mode = NewToOldBiasTestId(t.mode);
StatePack(t.pass, res.bias_pass_fail);
StrToBytes(INCC.SOURCE_ID_LENGTH, t.sourceId, res.bias_source_id);
res.bias_sngls_rate_expect = t.biasSnglsRateExpect.v;
res.bias_sngls_rate_expect_err = t.biasSnglsRateExpect.err;
res.bias_sngls_rate_expect_meas = t.biasSnglsRateExpectMeas.v;
res.bias_sngls_rate_expect_meas_err = t.biasSnglsRateExpectMeas.err;
res.bias_dbls_rate_expect = t.biasDblsRateExpect.v;
res.bias_dbls_rate_expect_err = t.biasDblsRateExpect.err;
res.bias_dbls_rate_expect_meas = t.biasDblsRateExpectMeas.v;
res.bias_dbls_rate_expect_meas_err = t.biasDblsRateExpectMeas.err;
res.new_norm_constant = t.newNormConstant.v;
res.new_norm_constant_err = t.newNormConstant.err;
res.required_precision = t.requiredPrecision;
res.required_meas_seconds = t.requiredMeasSeconds;
}
return res;
}
/// <summary>
/// Save in the database the summary <see cref="INCCResults.results_rec"/> results for every type of INCC measurement.
/// </summary>
/// <param name="m">The measurement to preserve</param>
/// <param name="moskey">The option selector+multiplicity key for the method results map</param>
static void SaveSummaryResultsForThisMeasurement(this Measurement m, MeasOptionSelector moskey)
{
long mid = m.MeasurementId.UniqueId;
DB.Results dbres = new DB.Results();
// save results with mid as foreign key
bool b = dbres.Update(mid, m.INCCAnalysisResults.TradResultsRec.ToDBElementList()); // APluralityOfMultiplicityAnalyzers: results rec needs to be fully populated before here, or it needs to be saved again at the end of the processing
m.Logger.TraceEvent(NCCReporter.LogLevels.Info, 34045, (b ? "Preserved " : "Failed to save ") + "summary results");
}
internal static unsafe iresultsbase MoveCollar(INCCAnalysisState ias, MeasOptionSelector mos)
{
results_collar_rec res = new results_collar_rec();
INCCMethodResult result;
bool found = ias.Results.TryGetMethodResults(mos.MultiplicityParams, ias.Methods.selector, AnalysisMethod.Collar, out result);
if (found)
{
INCCMethodResults.results_collar_rec m = (INCCMethodResults.results_collar_rec)result;
res.col_u235_mass = m.u235_mass.v;
res.col_u235_mass_err = m.u235_mass.err;
res.col_percent_u235 = m.percent_u235;
res.col_total_u_mass = m.total_u_mass;
res.col_k0 = m.k0.v;
res.col_k0_err = m.k0.err;
res.col_k1 = m.k1.v;
res.col_k1_err = m.k1.err;
res.col_k2 = m.k2.v;
res.col_k2_err = m.k2.err;
res.col_k3 = m.k3.v;
res.col_k3_err = m.k3.err;
res.col_k4 = m.k4.v;
res.col_k4_err = m.k4.err;
res.col_k5 = m.k5.v;
res.col_k5_err = m.k5.err;
res.col_total_corr_fact = m.total_corr_fact.v;
res.col_total_corr_fact_err = m.total_corr_fact.err;
StrToBytes(INCC.SOURCE_ID_LENGTH, m.source_id, res.col_source_id);
res.col_corr_doubles = m.corr_doubles.v;
res.col_corr_doubles_err = m.corr_doubles.err;
res.col_dcl_length = m.dcl_length.v;
res.col_dcl_length_err = m.dcl_length.err;
res.col_dcl_total_u235 = m.dcl_total_u235.v;
res.col_dcl_total_u235_err = m.dcl_total_u235.err;
res.col_dcl_total_u238 = m.dcl_total_u238.v;
res.col_dcl_total_u238_err = m.dcl_total_u238.err;
res.col_dcl_total_rods = m.dcl_total_rods;
res.col_dcl_total_poison_rods = m.dcl_total_poison_rods;
res.col_dcl_poison_percent = m.dcl_poison_percent.v;
res.col_dcl_poison_percent_err = m.dcl_poison_percent.err;
res.col_dcl_minus_asy_u235_mass = m.dcl_minus_asy_u235_mass.v;
res.col_dcl_minus_asy_u235_mass_err = m.dcl_minus_asy_u235_mass.err;
res.col_dcl_minus_asy_u235_mass_pct = m.dcl_minus_asy_u235_mass_pct;
StatePack(m.pass, res.col_pass_fail);
StrToBytes(INCC.MAX_DETECTOR_ID_LENGTH, ias.Methods.selector.detectorid, res.col_collar_detector_id);
StrToBytes(INCC.MAX_ITEM_TYPE_LENGTH, ias.Methods.selector.material, res.col_collar_item_type);
res.col_collar_mode = (byte)(m.methodParams.collar.collar_mode ? 1 : 0);
res.col_collar_equation = (byte)m.methodParamsC.cev.cal_curve_equation;
res.col_a_res = m.methodParamsC.cev.a;
res.col_b_res = m.methodParamsC.cev.b;
res.col_c_res = m.methodParamsC.cev.c;
res.col_d_res = m.methodParamsC.cev.d;
res.col_covar_ab_res = m.methodParamsC.cev.covar(Coeff.a, Coeff.b);
res.col_covar_ac_res = m.methodParamsC.cev.covar(Coeff.a, Coeff.c);
res.col_covar_ad_res = m.methodParamsC.cev.covar(Coeff.a, Coeff.d);
res.col_covar_bc_res = m.methodParamsC.cev.covar(Coeff.b, Coeff.c);
res.col_covar_bd_res = m.methodParamsC.cev.covar(Coeff.b, Coeff.d);
res.col_covar_cd_res = m.methodParamsC.cev.covar(Coeff.c, Coeff.d);
res.col_var_a_res = m.methodParamsC.cev.var_a;
res.col_var_b_res = m.methodParamsC.cev.var_b;
res.col_var_c_res = m.methodParamsC.cev.var_c;
res.col_var_d_res = m.methodParamsC.cev.var_d;
res.col_sigma_x_res = m.methodParamsC.cev.sigma_x;
res.col_number_calib_rods_res = m.methodParamsC.number_calib_rods;
StrToBytes(INCC.MAX_ROD_TYPE_LENGTH, m.methodParamsC.poison_rod_type[0], res.col_poison_rod_type_res);
res.col_poison_absorption_fact_res = m.methodParamsC.poison_absorption_fact[0];
res.col_poison_rod_a_res = m.methodParamsC.poison_rod_a[0].v;
res.col_poison_rod_a_err_res = m.methodParamsC.poison_rod_a[0].err;
res.col_poison_rod_b_res = m.methodParamsC.poison_rod_b[0].v;
res.col_poison_rod_b_err_res = m.methodParamsC.poison_rod_b[0].err;
res.col_poison_rod_c_res = m.methodParamsC.poison_rod_c[0].v;
res.col_poison_rod_c_err_res = m.methodParamsC.poison_rod_c[0].err;
res.col_u_mass_corr_fact_a_res = m.methodParamsC.u_mass_corr_fact_a.v;
res.col_u_mass_corr_fact_a_err_res = m.methodParamsC.u_mass_corr_fact_a.err;
res.col_u_mass_corr_fact_b_res = m.methodParamsC.u_mass_corr_fact_b.v;
res.col_u_mass_corr_fact_b_err_res = m.methodParamsC.u_mass_corr_fact_b.err;
res.col_sample_corr_fact_res = m.methodParamsC.sample_corr_fact.v;
res.col_sample_corr_fact_err_res = m.methodParamsC.sample_corr_fact.err;
byte[] b = new byte[INCC.DATE_TIME_LENGTH];
char[] a = m.methodParamsDetector.reference_date.ToString("yy.MM.dd").ToCharArray();
Encoding.ASCII.GetBytes(a, 0, a.Length, b, 0);
TransferUtils.Copy(b, res.col_reference_date_res);
res.col_relative_doubles_rate_res = m.methodParamsDetector.relative_doubles_rate;
byte[] bb = new byte[INCC.MAX_COLLAR_K5_PARAMETERS * INCC.MAX_K5_LABEL_LENGTH];
int indx = 0;
for (int i = 0; i < INCC.MAX_COLLAR_K5_PARAMETERS; i++)
{
char[] aa = m.methodParamsK5.k5_label[i].ToCharArray(0, Math.Min(m.methodParamsK5.k5_label[i].Length, INCC.MAX_K5_LABEL_LENGTH));
Encoding.ASCII.GetBytes(aa, 0, aa.Length, bb, indx);
indx += INCC.MAX_K5_LABEL_LENGTH;
}
TransferUtils.Copy(bb, 0, res.collar_k5_label_res, 0, INCC.MAX_COLLAR_K5_PARAMETERS * INCC.MAX_K5_LABEL_LENGTH);
TransferUtils.CopyBoolsToBytes(m.methodParamsK5.k5_checkbox, res.collar_k5_checkbox_res);
CopyTuples(m.methodParamsK5.k5, res.collar_k5_res, res.collar_k5_err_res, INCC.MAX_COLLAR_K5_PARAMETERS);
}
return res;
}
/// <summary>
/// after each cycle, run this cycle limit test and exit code
/// </summary>
/// <param name="seq"></param>
/// <param name="mkey"></param>
public static void CycleStatusTerminationCheck(this Measurement meas, Cycle cc)
{
bool stopAndComputeResults = meas.AcquireState.lm.SaveOnTerminate;
IEnumerator iter = cc.CountingAnalysisResults.GetMultiplicityEnumerator();
while (iter.MoveNext())
{
Multiplicity mkey = (Multiplicity)((KeyValuePair<SpecificCountingAnalyzerParams, object>)(iter.Current)).Key;
MultiplicityCountingRes mcr = (MultiplicityCountingRes)((KeyValuePair<SpecificCountingAnalyzerParams, object>)(iter.Current)).Value;
if (meas.MeasCycleStatus.num_checksum_failures > meas.Tests.maxNumFailures)
{
meas.Logger.TraceEvent(NCCReporter.LogLevels.Warning, 7071, "Maximum checksum failure count met, cycle {0} {1}", cc.seq, mkey);
if (stopAndComputeResults)
{
// URGENT: set state to end of measurement so that state moves out of cycles and skips forward to CalculateMeasurementResults
}
else
{
// exit processing completely, do not compute or save results
NC.App.Opstate.Abort();
}
}
if (meas.MeasCycleStatus.num_acc_sngl_failures > meas.Tests.maxNumFailures)
{
meas.Logger.TraceEvent(NCCReporter.LogLevels.Warning, 7072, "Maximum A/S failure count met, cycle {0} {1}", cc.seq, mkey);
// ditto above comment block
}
if (meas.MeasCycleStatus.num_high_voltage_failures > meas.Tests.maxNumFailures)
{
meas.Logger.TraceEvent(NCCReporter.LogLevels.Warning, 7073, "Maximum checksum failure count met, cycle {0} {1}", cc.seq, mkey);
// ditto above comment block
}
if ((meas.MeasCycleStatus.num_acc_sngl_failures >= NUM_ACC_SNGL_WARNING) &&
(!meas.MeasCycleStatus.acc_sngl_warning_sent))
{
meas.AddWarningMessage("At least " + meas.MeasCycleStatus.num_acc_sngl_failures + " A/S test failures", 7074, mkey);
meas.MeasCycleStatus.acc_sngl_warning_sent = true;
}
if ((meas.MeasCycleStatus.num_checksum_failures >= NUM_CHECKSUM_WARNING) &&
(!meas.MeasCycleStatus.checksum_warning_sent))
{
meas.AddWarningMessage("At least " + meas.MeasCycleStatus.num_checksum_failures + " checksum failures", 7075, mkey);
meas.MeasCycleStatus.checksum_warning_sent = true;
}
if ((meas.MeasCycleStatus.num_high_voltage_failures >= NUM_HIGH_VOLTAGE_WARNING) &&
(!meas.MeasCycleStatus.high_voltage_warning_sent))
{
meas.AddWarningMessage("At least " + meas.MeasCycleStatus.num_high_voltage_failures + " high voltage failures", 7076, mkey);
meas.MeasCycleStatus.high_voltage_warning_sent = true;
}
if (meas.AcquireState.acquire_type == AcquireConvergence.CycleCount)
{
meas.MeasCycleStatus.acquire_num_runs = meas.MeasCycleStatus.initial_num_runs +
meas.MeasCycleStatus.num_outlier_failures + meas.MeasCycleStatus.num_acc_sngl_failures +
meas.MeasCycleStatus.num_checksum_failures;
}
else if (meas.Cycles.GetValidCycleCountForThisKey(mkey) < 100) // an arbitrary limit, make it a config item
{
// URGENT: set state to end of measurement so that state moves out of cycles and skips forward to CalculateMeasurementResults
// todo: see take_data.cpp line 733 for mass check processing steps
if (meas.Cycles.GetValidCycleCountForThisKey(mkey) > 1)
{
INCCResult results;
MeasOptionSelector ar = new MeasOptionSelector(meas.MeasOption, mkey);
bool found = meas.INCCAnalysisResults.TryGetValue(ar, out results);
double error = 0;
if (meas.AcquireState.acquire_type == AcquireConvergence.DoublesPrecision)
{
if (results.rates.DTCRates.Doubles.v != 0.0)
{
error = results.rates.DTCRates.Doubles.err / results.rates.DTCRates.Doubles.v * 100.0;
}
}
else if (meas.AcquireState.acquire_type == AcquireConvergence.TriplesPrecision)
{
if (results.rates.DTCRates.Triples.v != 0.0)
{
error = results.rates.DTCRates.Triples.err / results.rates.DTCRates.Triples.v * 100.0;
}
}
else if (meas.AcquireState.acquire_type == AcquireConvergence.Pu240EffPrecision)
{
RatesAdjustments dtchoice = RatesAdjustments.Raw; // NEXT: design out this choice everywhere, it shoud be a flag on the current computational state somewhere
INCCMethodResults.results_multiplicity_rec res = INCCAnalysis.CalculateMultiplicity(mkey, results.covariance_matrix, results.rates.GetDTCRates(dtchoice), meas, dtchoice);
if (res != null)
{
// the results obtained within the method are already stored on the result and they do not need to be copied here (VERIFY THIS)
if (res.pu240e_mass.v != 0.0)
{
error = res.pu240e_mass.err /
res.pu240e_mass.v * 100.0;
}
else
error = 0.0;
}
}
meas.MeasCycleStatus.acquire_num_runs = (uint)((double)cc.seq * (error / meas.AcquireState.meas_precision) * (error / meas.AcquireState.meas_precision)) + 1;
meas.MeasCycleStatus.acquire_num_runs += meas.MeasCycleStatus.num_outlier_failures +
meas.MeasCycleStatus.num_acc_sngl_failures + meas.MeasCycleStatus.num_checksum_failures;
}
else
meas.MeasCycleStatus.acquire_num_runs = meas.AcquireState.max_num_runs;
if (meas.MeasCycleStatus.acquire_num_runs > meas.AcquireState.max_num_runs)
meas.MeasCycleStatus.acquire_num_runs = meas.AcquireState.max_num_runs;
if (meas.MeasCycleStatus.acquire_num_runs < meas.AcquireState.min_num_runs)
meas.MeasCycleStatus.acquire_num_runs = meas.AcquireState.min_num_runs;
}
}
}
internal static unsafe iresultsbase MoveDEMult(INCCAnalysisState ias, MeasOptionSelector mos)
{
results_de_mult_rec res = new results_de_mult_rec();
INCCMethodResult result;
bool found = ias.Results.TryGetMethodResults(mos.MultiplicityParams, ias.Methods.selector, AnalysisMethod.DUAL_ENERGY_MULT_SAVE_RESTORE, out result);
if (found)
{
INCCMethodResults.results_de_mult_rec m = (INCCMethodResults.results_de_mult_rec)result;
res.de_meas_ring_ratio = m.meas_ring_ratio;
res.de_interpolated_neutron_energy = m.interpolated_neutron_energy;
res.de_energy_corr_factor = m.energy_corr_factor;
TransferUtils.CopyDbls(m.methodParams.neutron_energy, res.de_neutron_energy_res);
TransferUtils.CopyDbls(m.methodParams.detector_efficiency, res.de_detector_efficiency_res);
TransferUtils.CopyDbls(m.methodParams.inner_outer_ring_ratio, res.de_inner_outer_ring_ratio_res);
TransferUtils.CopyDbls(m.methodParams.relative_fission, res.de_relative_fission_res);
res.de_inner_ring_efficiency_res = m.methodParams.inner_ring_efficiency;
res.de_outer_ring_efficiency_res = m.methodParams.outer_ring_efficiency;
StrToBytes(INCC.MAX_DETECTOR_ID_LENGTH, ias.Methods.selector.detectorid, res.de_mult_detector_id);
StrToBytes(INCC.MAX_ITEM_TYPE_LENGTH, ias.Methods.selector.material, res.de_mult_item_type);
}
return res;
}
/// <summary>
/// Calculate averages and sums for all cycles in a measurement that pass all tests
/// Do processing for all the Multiplicity results across all the cycles of the current Measurement
/// </summary>
public static void CalcAvgAndSums(this Measurement meas)
{
RatesAdjustments dtchoice = RatesAdjustments.DeadtimeCorrected;
if (NC.App.Opstate.IsAbortRequested)
return;
IEnumerator iter = meas.CountingAnalysisResults.GetMultiplicityEnumerator();
while (iter.MoveNext())
{
Multiplicity mkey = (Multiplicity)((KeyValuePair<SpecificCountingAnalyzerParams, object>)(iter.Current)).Key;
meas.Logger.TraceEvent(NCCReporter.LogLevels.Info, 7003, "Calculating averages and sums for valid cycles {0} {1}", dtchoice, mkey);
MultiplicityCountingRes mcr = (MultiplicityCountingRes)meas.CountingAnalysisResults[mkey];
mcr.ComputeHitSums();
// APluralityOfMultiplicityAnalyzers: When a list mode sourced measurement is in use, and
// cycle data comes from a prior analysis via a DB cycle source or Verification reanalysis,
// doubles are computed using the LMSupport.SDTMultiplicityCalculator.
// Note that DAQ LM sourced INCC5 analyses will have the unnormalized Acc distro.
// The method INCCAnalysis.CalcAveragesAndSums uses the unnormalized
// Acc distro (mcr.UnAMult), but in the two cases above there is only the normalized Acc and RealsAcc distros are present.
// So the *unnormalized distro* must be computed and placed on each cycle, then and only then are doubles calculated correctly.
INCCAnalysis.CalcAveragesAndSums(mkey, mcr, meas, dtchoice, meas.Detector.Id.SRType);
mcr.Scaler1Rate.v = mcr.Scaler1.v;
mcr.Scaler1Rate.err = mcr.Scaler1.err;
mcr.Scaler2Rate.v = mcr.Scaler2.v;
mcr.Scaler2Rate.err = mcr.Scaler2.err;
MeasOptionSelector mos = new MeasOptionSelector(meas.MeasOption, mkey);
INCCResult results = meas.INCCAnalysisState.Lookup(mos);
if (results != null)
{
results.Scaler1Rate.v = mcr.Scaler1.v;
results.Scaler1Rate.err = mcr.Scaler1.err;
results.Scaler2Rate.v = mcr.Scaler2.v;
results.Scaler2Rate.err = mcr.Scaler2.err;
}
}
}
internal static unsafe iresultsbase MoveKnownA(INCCAnalysisState ias, MeasOptionSelector mos)
{
results_known_alpha_rec res = new results_known_alpha_rec();
INCCMethodResult result;
bool found = ias.Results.TryGetMethodResults(mos.MultiplicityParams, ias.Methods.selector, AnalysisMethod.KnownA, out result);
if (found)
{
INCCMethodResults.results_known_alpha_rec m = (INCCMethodResults.results_known_alpha_rec)result;
res.ka_mult = m.mult;
res.ka_alpha = m.alphaK;
res.ka_mult_corr_doubles = m.mult_corr_doubles.v;
res.ka_mult_corr_doubles_err = m.mult_corr_doubles.err;
res.ka_pu240e_mass = m.pu240e_mass.v;
res.ka_pu240e_mass_err = m.pu240e_mass.err;
res.ka_pu_mass = m.pu_mass.v;
res.ka_pu_mass_err = m.pu_mass.err;
res.ka_dcl_pu240e_mass = m.dcl_pu240e_mass;
res.ka_dcl_minus_asy_pu_mass = m.dcl_minus_asy_pu_mass.v;
res.ka_dcl_minus_asy_pu_mass_err = m.dcl_minus_asy_pu_mass.err;
res.ka_dcl_minus_asy_pu_mass_pct = m.dcl_minus_asy_pu_mass_pct;
StatePack(m.pass, res.ka_pass_fail);
res.ka_dcl_u_mass = m.dcl_u_mass;
res.ka_length = m.length;
res.ka_heavy_metal_content = m.heavy_metal_content;
res.ka_heavy_metal_correction = m.heavy_metal_correction;
res.ka_corr_singles = m.corr_singles.v;
res.ka_corr_singles_err = m.corr_singles.err;
res.ka_corr_doubles = m.corr_doubles.v;
res.ka_corr_doubles_err = m.corr_doubles.err;
res.ka_corr_factor = m.corr_factor;
res.ka_dry_alpha_or_mult_dbls = m.dry_alpha_or_mult_dbls;
res.ka_alpha_wt_res = m.methodParams.alpha_wt;
res.ka_rho_zero_res = m.methodParams.rho_zero;
res.ka_k_res = m.methodParams.k;
res.ka_a_res = m.methodParams.cev.a;
res.ka_b_res = m.methodParams.cev.b;
res.ka_var_a_res = m.methodParams.cev.var_a;
res.ka_var_b_res = m.methodParams.cev.var_b;
res.ka_covar_ab_res = m.methodParams.cev.covar(Coeff.a, Coeff.b);
res.ka_sigma_x_res = m.methodParams.cev.sigma_x;
res.ka_known_alpha_type_res = (double)m.methodParams.known_alpha_type;
res.ka_heavy_metal_corr_factor_res = m.methodParams.heavy_metal_corr_factor;
res.ka_heavy_metal_reference_res = m.methodParams.heavy_metal_reference;
res.ka_lower_corr_factor_limit_res = m.methodParams.lower_corr_factor_limit;
res.ka_upper_corr_factor_limit_res = m.methodParams.upper_corr_factor_limit;
StrToBytes(INCC.MAX_DETECTOR_ID_LENGTH, ias.Methods.selector.detectorid, res.ka_known_alpha_detector_id);
StrToBytes(INCC.MAX_ITEM_TYPE_LENGTH, ias.Methods.selector.material, res.ka_known_alpha_item_type);
}
return res;
}
/// <summary>
/// Save all updated and new results in the database
/// </summary>
public static void SaveMeasurementResults(this Measurement meas)
{
if (meas.Detector.ListMode)
{
long mid = meas.MeasurementId.UniqueId;
foreach(SpecificCountingAnalyzerParams s in meas.CountingAnalysisResults.Keys)
{
// this is a virtual LMSR so save each mkey
Type t = s.GetType();
DB.ElementList els = s.ToDBElementList();
if (t.Equals(typeof(Multiplicity)))
{
Multiplicity thisone = ((Multiplicity)s);
els.Add(new DB.Element("predelay", thisone.SR.predelay));
}
else if (t.Equals(typeof(Coincidence)))
{
Coincidence thisone = ((Coincidence)s);
els.Add(new DB.Element("predelay", thisone.SR.predelay));
}
DB.LMParamsRelatedBackToMeasurement counter = new DB.LMParamsRelatedBackToMeasurement(s.Table);
s.Rank = counter.Create(mid, els);
meas.Logger.TraceEvent(NCCReporter.LogLevels.Verbose, 34103, string.Format("Preserving {0}_m as {1}", s.Table, s.Rank));
}
}
SaveMeasurementCycles(meas);
IEnumerator iter = meas.CountingAnalysisResults.GetMultiplicityEnumerator();
while (iter.MoveNext())
{
Multiplicity mkey = (Multiplicity)((KeyValuePair<SpecificCountingAnalyzerParams, object>)(iter.Current)).Key;
if (NC.App.Opstate.IsAbortRequested)
return;
INCCResult results;
MeasOptionSelector moskey = new MeasOptionSelector(meas.MeasOption, mkey);
bool found = meas.INCCAnalysisResults.TryGetValue(moskey, out results); // APluralityOfMultiplicityAnalyzers: when does this actually get saved? It needs to be saved to DB after all calculations are complete
try
{
switch (meas.MeasOption)
{
case AssaySelector.MeasurementOption.background: // calculated in CalculateResults, update bkg and save the result to the DB
// save the background result to the bkg_parms_rec table under the current SR key
BackgroundParameters c = NC.App.DB.BackgroundParameters.Get(meas.Detector);
if (c != null)
c.Copy(meas.Background); // copy changes back to original on user affirmation
else
{
c = meas.Background;
NC.App.DB.BackgroundParameters.GetMap().Add(meas.Detector, c);
}
NC.App.DB.BackgroundParameters.Set(meas.Detector, c);
break;
case AssaySelector.MeasurementOption.initial: // calculated in CalculateResults, update norm and save the norm and init_src result to the DB
INCCResults.results_init_src_rec results_init_src = (INCCResults.results_init_src_rec)results;
// on fail, only the relevant results_init_src_rec is saved
// on pass, the normalization parameters are modified with the results_init_src_rec results, and so both are updated.
if (results_init_src.pass)
{
NormParameters np = NC.App.DB.NormParameters.Get(meas.Detector);
if (np != null)
np.Copy(meas.Norm); // copy any changes made to Norm as defined for the current detector
else
{
np = meas.Norm;
NC.App.DB.NormParameters.GetMap().Add(meas.Detector, np);
}
NC.App.DB.NormParameters.Set(meas.Detector, np);
}
SaveSpecificResultsForThisMeasurement(meas, results);
break;
case AssaySelector.MeasurementOption.normalization: // calculated in CalculateResults, now save the result to the DB
case AssaySelector.MeasurementOption.precision: // ditto
SaveSpecificResultsForThisMeasurement(meas, results);
break;
case AssaySelector.MeasurementOption.calibration: // ditto with the method analyses results, but they're a bit different
case AssaySelector.MeasurementOption.verification:
SaveMethodResultsForThisMeasurement(meas, moskey);
break;
case AssaySelector.MeasurementOption.holdup: // NEXT: Hold-up held up, implement it #35
break;
}
}
catch (Exception e)
{
meas.Logger.TraceException(e);
}
SaveSummaryResultsForThisMeasurement(meas, moskey);
}
meas.PersistFileNames();
}
internal static unsafe iresultsbase MoveMult(INCCAnalysisState ias, MeasOptionSelector mos)
{
results_multiplicity_rec res = new results_multiplicity_rec();
INCCMethodResult result;
bool found = ias.Results.TryGetMethodResults(mos.MultiplicityParams, ias.Methods.selector, AnalysisMethod.Multiplicity, out result);
if (found)
{
INCCMethodResults.results_multiplicity_rec m = (INCCMethodResults.results_multiplicity_rec)result;
res.mul_mult = m.mult.v;
res.mul_mult_err = m.mult.err;
res.mul_alpha = m.alphaK.v;
res.mul_alpha_err = m.alphaK.err;
res.mul_corr_factor = m.alphaK.v;
res.mul_corr_factor_err = m.alphaK.err;
res.mul_efficiency = m.alphaK.v;
res.mul_efficiency_err = m.alphaK.err;
res.mul_pu240e_mass = m.pu240e_mass.v;
res.mul_pu240e_mass_err = m.pu240e_mass.err;
res.mul_pu_mass = m.pu_mass.v;
res.mul_pu_mass_err = m.pu_mass.err;
res.mul_dcl_pu240e_mass = m.dcl_pu240e_mass;
res.mul_dcl_minus_asy_pu_mass = m.dcl_minus_asy_pu_mass.v;
res.mul_dcl_minus_asy_pu_mass_err = m.dcl_minus_asy_pu_mass.err;
res.mul_dcl_minus_asy_pu_mass_pct = m.dcl_minus_asy_pu_mass_pct;
StatePack(m.pass, res.mul_pass_fail);
res.mul_solve_efficiency_res = (byte)m.solve_efficiency_choice;
res.mul_sf_rate_res = m.methodParams.sf_rate;
res.mul_vs1_res = m.methodParams.vs1;
res.mul_vs2_res = m.methodParams.vs2;
res.mul_vs3_res = m.methodParams.vs3;
res.mul_vi1_res = m.methodParams.vi1;
res.mul_vi2_res = m.methodParams.vi2;
res.mul_vi3_res = m.methodParams.vi3;
res.mul_a_res = m.methodParams.a;
res.mul_b_res = m.methodParams.b;
res.mul_c_res = m.methodParams.c;
res.mul_sigma_x_res = m.methodParams.sigma_x;
res.mul_alpha_weight_res = m.methodParams.alpha_weight;
StrToBytes(INCC.MAX_DETECTOR_ID_LENGTH, ias.Methods.selector.detectorid, res.mul_multiplicity_detector_id);
StrToBytes(INCC.MAX_ITEM_TYPE_LENGTH, ias.Methods.selector.material, res.mul_multiplicity_item_type);
}
return res;
}
// INCC5 enables subselecting each field and creates a two line header instead of one.
Dictionary <string, string> GenerateEntries(Selections s, Measurement m)
{
Dictionary <string, string> entries = new Dictionary <string, string>();
switch (s)
{
case Selections.AcquireParams:
entries["Facility"] = Q(m.AcquireState.facility.Name);
entries["MBA"] = Q(m.AcquireState.mba.Name);
entries["Detector"] = Q(m.AcquireState.detector_id);
entries["IC"] = Q(m.AcquireState.inventory_change_code);
entries["IO"] = Q(m.AcquireState.io_code);
entries["Measurement Type"] = Q(m.MeasOption.PrintName());
entries["Meas Date"] = m.MeasurementId.MeasDateTime.ToString("yy.MM.dd");
entries["Meas Time"] = m.MeasurementId.MeasDateTime.ToString("HH:mm:ss");
entries["File Name"] = Q(GetMainFilePath(m.ResultsFiles, m.MeasOption, true));
entries["Inspector"] = Q(m.AcquireState.user_id);
entries["Inspection Number"] = Q(m.AcquireState.campaign_id);
entries["Item ID"] = Q(m.AcquireState.item_id);
entries["Isotopics ID"] = Q(m.AcquireState.isotopics_id);
entries["Stratum ID"] = Q(m.AcquireState.stratum_id.Name);
entries["Material Type"] = Q(m.AcquireState.item_type);
break;
case Selections.NormalizationParams:
entries["Norm Cnst"] = m.Norm.currNormalizationConstant.v.ToString("F4"); // "Normalization constant"
entries["Norm Cnst Error"] = m.Norm.currNormalizationConstant.err.ToString("F4"); // "Normalization constant error"
break;
case Selections.BackgroundParams:
entries["Singles Bkg"] = m.Background.DeadtimeCorrectedSinglesRate.v.ToString("F1"); // "Passive singles background"
entries["Singles Bkg Error"] = m.Background.DeadtimeCorrectedSinglesRate.err.ToString("F3"); // "Passive singles background error"
entries["Doubles Bkg"] = m.Background.DeadtimeCorrectedDoublesRate.v.ToString("F2"); // "Passive doubles background"
entries["Doubles Bkg Error"] = m.Background.DeadtimeCorrectedDoublesRate.err.ToString("F3"); // "Passive doubles background error"
entries["Triples Bkg"] = m.Background.DeadtimeCorrectedTriplesRate.v.ToString("F2"); // "Passive triples background"
entries["Triples Bkg Error"] = m.Background.DeadtimeCorrectedTriplesRate.err.ToString("F3"); // "Passive triples background error"
entries["Act Sngls Bkg"] = m.Background.INCCActive.SinglesRate.ToString("F1"); // "Active singles background"
entries["Act Sngls Bkg Error"] = m.Background.INCCActive.Singles.err.ToString("F3"); // "Active singles background error"
break;
case Selections.Summaries:
if (m.INCCAnalysisState != null && m.INCCAnalysisResults != null)
{
System.Collections.IEnumerator iter = m.INCCAnalysisResults.GetMeasSelectorResultsEnumerator();
while (iter.MoveNext())
{
MeasOptionSelector moskey = (MeasOptionSelector)iter.Current;
INCCResult ir = m.INCCAnalysisResults[moskey];
entries["Singles"] = ir.DeadtimeCorrectedSinglesRate.v.ToString("F1"); // "Singles"
entries["Singles Error"] = ir.DeadtimeCorrectedSinglesRate.err.ToString("F3"); // "Singles error"
entries["Doubles"] = ir.DeadtimeCorrectedDoublesRate.v.ToString("F2"); // "Doubles"
entries["Doubles Error"] = ir.DeadtimeCorrectedDoublesRate.err.ToString("F3"); // "Doubles error"
entries["Triples"] = ir.DeadtimeCorrectedTriplesRate.v.ToString("F2"); // "Triples"
entries["Triples Error"] = ir.DeadtimeCorrectedTriplesRate.err.ToString("F3"); // "Triples error"
if (ir.Scaler1.v > 0 || ir.Scaler2.v > 0)
{
entries["Scaler 1"] = ir.Scaler1.v.ToString("F1");
entries["Scaler 1 Error"] = ir.Scaler1.err.ToString("F3");
entries["Scaler 2"] = ir.Scaler2.v.ToString("F1");
entries["Scaler 2 Error"] = ir.Scaler2.err.ToString("F3");
}
entries["Count Time"] = (m.Cycles.Count > 0 ? m.Cycles[0].TS.TotalSeconds.ToString("F0") : "0"); // "Total count time for a measurement"
entries["Singles Sum"] = m.SinglesSum.ToString("F0"); // Sums - singles Singles sum for a measurement"
entries["R+A Sum"] = ir.RASum.ToString("F0"); // Reals + accidentals sum for a measurement"
entries["A Sum"] = ir.ASum.ToString("F0"); // "Accidentals sum for a measurement"
}
}
break;
case Selections.Comments:
entries["Comment"] = m.AcquireState.comment;
if (m.INCCAnalysisResults.TradResultsRec.acq.ending_comment &&
!string.IsNullOrEmpty(m.INCCAnalysisResults.TradResultsRec.acq.ending_comment_str))
{
entries["End Comment"] = m.AcquireState.ending_comment_str;
}
break;
case Selections.MassAnalysisMethods:
break;
case Selections.CalibrationCurve:
INCCMethodResults.results_cal_curve_rec ccres = (INCCMethodResults.results_cal_curve_rec)
m.INCCAnalysisResults.LookupMethodResults(m.Detector.MultiplicityParams, m.INCCAnalysisState.Methods.selector, AnalysisMethod.CalibrationCurve, false);
if (ccres != null)
{
entries["Cal Cur Dcl Mass"] = ccres.dcl_pu_mass.ToString("F2"); // Calibration curve - declared mass"
entries["Cal Cur Mass"] = ccres.pu_mass.v.ToString("F2"); // "Calibration curve - mass"
entries["Cal Cur Mass Err"] = ccres.pu_mass.err.ToString("F3"); // "Calibration curve - mass error"
entries["Cal Cur Dcl-Asy"] = ccres.dcl_minus_asy_pu_mass.v.ToString("F2"); // "Calibration curve - declared minus assay"
entries["Cal Cur Dcl-Asy %"] = ccres.dcl_minus_asy_pu_mass_pct.ToString("F2"); // "Calibration curve - declared minus assay %"
entries["Cal Cur Status"] = ccres.pass ? "Pass": ""; // "Calibration curve - measurement status"
}
break;
case Selections.KnownAlpha:
INCCMethodResults.results_known_alpha_rec kares = (INCCMethodResults.results_known_alpha_rec)
m.INCCAnalysisResults.LookupMethodResults(m.Detector.MultiplicityParams, m.INCCAnalysisState.Methods.selector, AnalysisMethod.KnownA, false);
if (kares != null)
{
entries["Known A Dcl Mass"] = kares.dcl_pu_mass.ToString("F2"); // Known alpha - declared mass"
entries["Known A Mass"] = kares.pu_mass.v.ToString("F2"); // "Known alpha - mass"
entries["Known A Mass Err"] = kares.pu_mass.err.ToString("F3"); // "Known alpha - mass error"
entries["Known A Dcl-Asy"] = kares.dcl_minus_asy_pu_mass.v.ToString("F2"); // "Known alpha - declared minus assay"
entries["Known A Dcl-Asy %"] = kares.dcl_minus_asy_pu_mass_pct.ToString("F2"); // "Known alpha - declared minus assay %"
entries["Known A Mult"] = kares.mult.ToString("F3"); // "Known alpha - multiplication"
entries["Known A Alpha"] = kares.alphaK.ToString("F3"); // "Known alpha - alpha"
entries["Known A Status"] = kares.pass ? "Pass": ""; // "Known alpha - measurement status"
}
break;
case Selections.KnownM:
INCCMethodResults.results_known_m_rec kmres = (INCCMethodResults.results_known_m_rec)
m.INCCAnalysisResults.LookupMethodResults(m.Detector.MultiplicityParams, m.INCCAnalysisState.Methods.selector, AnalysisMethod.KnownM, false);
if (kmres != null)
{
entries["Known M Dcl Mass"] = kmres.dcl_pu_mass.ToString("F2"); // Known M - declared mass"
entries["Known M Mass"] = kmres.pu_mass.v.ToString("F2"); // "Known M - mass"
entries["Known M Mass Err"] = kmres.pu_mass.err.ToString("F3"); // "Known M - mass error"
entries["Known M Dcl-Asy"] = kmres.dcl_minus_asy_pu_mass.v.ToString("F2"); // "Known M - declared minus assay"
entries["Known M Dcl-Asy %"] = kmres.dcl_minus_asy_pu_mass_pct.ToString("F2"); // "Known M - declared minus assay %"
entries["Known M Mult"] = kmres.mult.ToString("F3"); // "Known M - multiplication"
entries["Known M Alpha"] = kmres.alpha.ToString("F3"); // "Known M - alpha"
entries["Known M Status"] = kmres.pass ? "Pass": ""; // "Known M - measurement status"
}
break;
case Selections.Multiplicity:
INCCMethodResults.results_multiplicity_rec mres = (INCCMethodResults.results_multiplicity_rec)
m.INCCAnalysisResults.LookupMethodResults(m.Detector.MultiplicityParams, m.INCCAnalysisState.Methods.selector, AnalysisMethod.Multiplicity, false);
if (mres != null)
{
entries["Mult Dcl Mass"] = mres.dcl_pu_mass.ToString("F2"); // Multiplicity - declared mass"
entries["Mult Mass"] = mres.pu_mass.v.ToString("F2"); // "Multiplicity- mass"
entries["Mult Mass Err"] = mres.pu_mass.err.ToString("F3"); // "Multiplicity - mass error"
entries["Mult Dcl-Asy"] = mres.dcl_minus_asy_pu_mass.v.ToString("F2"); // "Multiplicity - declared minus assay"
entries["Mult Dcl-Asy %"] = mres.dcl_minus_asy_pu_mass_pct.ToString("F2"); // "Multiplicity - declared minus assay %"
entries["Mult Mult"] = mres.mult.v.ToString("F3"); // "Multiplicity - multiplication"
entries["Mult Mult Err"] = mres.mult.err.ToString("F3"); // "Multiplicity - multiplication error"
entries["Mult Alpha"] = mres.alphaK.v.ToString("F3"); // "Multiplicity - alpha"
entries["Mult Alpha Err"] = mres.alphaK.err.ToString("F3"); // "Multiplicity - alpha error"
entries["Mult Efficiency"] = mres.efficiencyComputed.v.ToString("F3"); // "Multiplicity - efficiency"
entries["Mult Eff Err"] = mres.efficiencyComputed.err.ToString("F3"); // "Multiplicity - efficiency error"
entries["Mult Status"] = mres.pass ? "Pass": ""; // "Multiplicity - measurement status"
entries["Mult Predelay ms"] = m.Detector.SRParams.predelayMS.ToString(); // "Multiplicity - predelay "
entries["Mult Gate ms"] = m.Detector.SRParams.gateLengthMS.ToString(); // "Multiplicity - gate width"
}
break;
case Selections.AddASource:
INCCMethodResults.results_add_a_source_rec aares = (INCCMethodResults.results_add_a_source_rec)
m.INCCAnalysisResults.LookupMethodResults(m.Detector.MultiplicityParams, m.INCCAnalysisState.Methods.selector, AnalysisMethod.AddASource, false);
if (aares != null)
{
entries["Add-a-src Dcl Mass"] = aares.dcl_pu_mass.ToString("F2"); // Add-a-source - declared mass"
entries["Add-a-src Mass"] = aares.pu_mass.v.ToString("F2"); // "Add-a-source - mass"
entries["Add-a-src Mass Err"] = aares.pu_mass.err.ToString("F3"); // "Add-a-source - mass error"
entries["Add-a-src Dcl-Asy"] = aares.dcl_minus_asy_pu_mass.v.ToString("F2"); // "Add-a-source - declared minus assay"
entries["Add-a-src Dcl-Asy %"] = aares.dcl_minus_asy_pu_mass_pct.ToString("F2"); // "Add-a-source - declared minus assay %"
entries["Add-a-src Status"] = aares.pass ? "Pass": ""; // "Add-a-source - measurement status"
entries["Add-a-src Corr"] = aares.corr_factor.v.ToString("F3"); // "Add-a-source - measurement status"
}
break;
case Selections.CuriumRatio:
INCCMethodResults.results_curium_ratio_rec cures = (INCCMethodResults.results_curium_ratio_rec)
m.INCCAnalysisResults.LookupMethodResults(m.Detector.MultiplicityParams, m.INCCAnalysisState.Methods.selector, AnalysisMethod.CuriumRatio, false);
if (cures != null)
{
entries["Cm Ratio ID"] = cures.methodParams2.cm_id; // Curium ratio - ID"
entries["Cm Ratio Input ID"] = cures.methodParams2.cm_input_batch_id; // Curium ratio - input batch ID"
entries["Cm Ratio Cm/Pu"] = cures.methodParams2.cm_pu_ratio.v.ToString("F4"); // Curium ratio - Cm/Pu ratio"
entries["Cm Ratio Cm/U"] = cures.methodParams2.cm_u_ratio.v.ToString("F4"); // Curium ratio - Cm/U ratio"
entries["Cm Mass"] = cures.cm_mass.v.ToString("F3"); // Curium ratio - Cm mass"
entries["Cm Err"] = cures.cm_mass.err.ToString("F3"); // Curium ratio - Cm mass error"
entries["Cm Ratio Pu Dcl Mass"] = cures.pu.dcl_pu_mass.ToString("F2"); // Curium ratio - declared mass"
entries["Cm Ratio Pu Mass"] = cures.pu.pu_mass.v.ToString("F2"); // "Curium ratio - mass"
entries["Cm Ratio Pu Mass Err"] = cures.pu.pu_mass.err.ToString("F3"); // "Curium ratio - mass error"
entries["Cm Ratio Pu Dcl-Asy"] = cures.pu.dcl_minus_asy_pu_mass.v.ToString("F2"); // "Curium ratio - declared minus assay"
entries["Cm Ratio Pu Dcl-Asy %"] = cures.pu.dcl_minus_asy_pu_mass_pct.ToString("F2"); // "Curium ratio - declared minus assay %"
entries["Cm Ratio U Dcl Mass"] = cures.u.dcl_mass.ToString("F2"); // "Curium ratio - U declared mass"
entries["Cm Ratio U Mass"] = cures.u.mass.v.ToString("F2"); // "Curium ratio - U mass"
entries["Cm Ratio U Mass Err"] = cures.u.mass.err.ToString("F3"); // "Curium ratio - U mass error"
entries["Cm Ratio U Dcl-Asy"] = cures.u.dcl_minus_asy_mass.v.ToString("F2"); // "Curium ratio - U declared minus assay"
entries["Cm Ratio U Dcl-Asy %"] = cures.u.dcl_minus_asy_mass_pct.ToString("F2"); // "Curium ratio - U declared minus assay %"
entries["Cm Ratio U235 Dcl Mass"] = cures.u235.dcl_mass.ToString("F2"); // Curium ratio - U235 declared mass"
entries["Cm Ratio U235 Mass"] = cures.u235.mass.v.ToString("F2"); // "Curium ratio - U235 mass"
entries["Cm Ratio U235 Mass Err"] = cures.u235.mass.err.ToString("F3"); // "Curium ratio - U235 mass error"
entries["Cm Ratio U235 Dcl-Asy"] = cures.u235.dcl_minus_asy_mass.v.ToString("F2"); // "Curium ratio - U235 declared minus assay"
entries["Cm Ratio U235 Dcl-Asy %"] = cures.u235.dcl_minus_asy_mass_pct.ToString("F2"); // "Curium ratio - U235 declared minus assay %"
entries["Cm Ratio Pu Status"] = cures.pu.pass ? "Pass": ""; // "Curium ratio - Pu measurement status"
entries["Cm Ratio U Status"] = cures.u.pass ? "Pass": ""; // "Curium ratio - U measurement status"
}
break;
case Selections.TruncatedMultiplicity:
INCCMethodResults.results_truncated_mult_rec tmres = (INCCMethodResults.results_truncated_mult_rec)
m.INCCAnalysisResults.LookupMethodResults(m.Detector.MultiplicityParams, m.INCCAnalysisState.Methods.selector, AnalysisMethod.TruncatedMultiplicity, false);
if (tmres != null)
{
entries["Trunc Mult Dcl Mass"] = tmres.k.dcl_mass.ToString("F2"); // "Truncated multiplicity - declared mass"
entries["Trunc Mult Mass"] = tmres.k.pu_mass.v.ToString("F2"); // "Truncated multiplicity - mass"
entries["Trunc Mult Mass Err"] = tmres.k.pu_mass.err.ToString("F3"); // "Truncated multiplicity - mass error"
entries["Trunc Mult Dcl-Asy"] = tmres.k.dcl_minus_asy_mass.v.ToString("F2"); // "Truncated multiplicity - declared minus assay"
entries["Trunc Dcl-Asy %"] = tmres.k.dcl_minus_asy_mass_pct.ToString("F2"); //"Truncated multiplicity - declared minus assay %"
entries["Trunc Mult Status"] = tmres.k.pass ? "Pass": ""; // "Truncated multiplicity - measurement status" // todo: what about 's'?
}
break;
case Selections.ActiveCalibCurve:
INCCMethodResults.results_active_rec acres = (INCCMethodResults.results_active_rec)
m.INCCAnalysisResults.LookupMethodResults(m.Detector.MultiplicityParams, m.INCCAnalysisState.Methods.selector, AnalysisMethod.Active, false);
if (acres != null)
{
entries["Active Dcl Mass"] = acres.dcl_u235_mass.ToString("F2"); // Active calibration curve - declared mass"
entries["Active Mass"] = acres.u235_mass.v.ToString("F2"); // "Active calibration curve - mass"
entries["Active Mass Err"] = acres.u235_mass.err.ToString("F3"); // "Active calibration curve - mass error"
entries["Active Dcl-Asy"] = acres.dcl_minus_asy_u235_mass.v.ToString("F2"); // "Active calibration curve - declared minus assay"
entries["Active Dcl-Asy %"] = acres.dcl_minus_asy_u235_mass_pct.ToString("F2"); // "Active calibration curve - declared minus assay %"
entries["Active Status"] = acres.pass ? "Pass": ""; // "Active calibration curve - measurement status"
}
break;
case Selections.CollarAmLi:
INCCMethodResults.results_collar_rec rcres = (INCCMethodResults.results_collar_rec)
m.INCCAnalysisResults.LookupMethodResults(m.Detector.MultiplicityParams, m.INCCAnalysisState.Methods.selector, AnalysisMethod.CollarAmLi, false);
if (rcres != null)
{
entries["Collar Dbls Rate"] = rcres.total_corr_fact.v.ToString("F2"); // Collar - corrected doubles rate"
entries["Collar Dbls Rate Err"] = rcres.total_corr_fact.v.ToString("F2"); // Collar -- corrected doubles rate error"
entries["Collar Dcl Mass"] = rcres.dcl_total_u235.v.ToString("F2"); // Collar - declared mass"
entries["Collar Mass"] = rcres.u235_mass.v.ToString("F2"); // "Collar - mass"
entries["Collar Mass Err"] = rcres.u235_mass.err.ToString("F3"); // "Collar - mass error"
entries["Collar Dcl-Asy"] = rcres.dcl_minus_asy_u235_mass.v.ToString("F2"); // "Collar - declared minus assay"
entries["Collar Dcl-Asy %"] = rcres.dcl_minus_asy_u235_mass_pct.ToString("F2"); // "Collar - declared minus assay %"
entries["Collar Status"] = rcres.pass ? "Pass": ""; // "Collar - measurement status"
}
break;
case Selections.CollarCf:
rcres = (INCCMethodResults.results_collar_rec)
m.INCCAnalysisResults.LookupMethodResults(m.Detector.MultiplicityParams, m.INCCAnalysisState.Methods.selector, AnalysisMethod.CollarCf, false);
if (rcres != null)
{
entries["Collar Dbls Rate"] = rcres.total_corr_fact.v.ToString("F2"); // Collar - corrected doubles rate"
entries["Collar Dbls Rate Err"] = rcres.total_corr_fact.v.ToString("F2"); // Collar -- corrected doubles rate error"
entries["Collar Dcl Mass"] = rcres.dcl_total_u235.v.ToString("F2"); // Collar - declared mass"
entries["Collar Mass"] = rcres.u235_mass.v.ToString("F2"); // "Collar - mass"
entries["Collar Mass Err"] = rcres.u235_mass.err.ToString("F3"); // "Collar - mass error"
entries["Collar Dcl-Asy"] = rcres.dcl_minus_asy_u235_mass.v.ToString("F2"); // "Collar - declared minus assay"
entries["Collar Dcl-Asy %"] = rcres.dcl_minus_asy_u235_mass_pct.ToString("F2"); // "Collar - declared minus assay %"
entries["Collar Status"] = rcres.pass ? "Pass" : ""; // "Collar - measurement status"
}
break;
default:
break;
}
return(entries);
}
// NEXT: confused with tm_bkg and bkg measurements
internal static unsafe iresultsbase MoveTruncBkg(INCCAnalysisState ias, MeasOptionSelector mos)
{
results_tm_bkg_rec res = new results_tm_bkg_rec();
INCCMethodResult result;
bool found = ias.Results.TryGetMethodResults(mos.MultiplicityParams, ias.Methods.selector, AnalysisMethod.None, out result);
if (found)
{
INCCMethodResults.results_tm_bkg_rec m = (INCCMethodResults.results_tm_bkg_rec)result; // todo: tm bkg handling design incomplete
res.results_tm_singles_bkg = m.methodParams.Singles.v;
res.results_tm_singles_bkg_err = m.methodParams.Singles.err;
res.results_tm_zeros_bkg = m.methodParams.Zeros.v;
res.results_tm_zeros_bkg_err = m.methodParams.Zeros.err;
res.results_tm_ones_bkg = m.methodParams.Ones.v;
res.results_tm_ones_bkg_err = m.methodParams.Ones.err;
res.results_tm_twos_bkg = m.methodParams.Twos.v;
res.results_tm_twos_bkg_err = m.methodParams.Twos.err;
}
return res;
}
/// <summary>
/// Finalize measurement instance content for analysis
/// Populate calibration parameters maps
/// </summary>
/// <param name="meas">The partially initialized measurement instance</param>
/// <param name="useCurCalibParams">Default behavior is to use active method and other calibration parameters;
/// skipped if Reanalysis prepared the details from database measurement results
/// </param>
static public void FillInReanalysisRemainingDetails(Measurement meas, bool useCurCalibParams = true)
{
// get the current INCC5 analysis methods
if (useCurCalibParams || meas.INCCAnalysisState == null)
{
meas.INCCAnalysisState = new INCCAnalysisState();
INCCSelector sel = new INCCSelector(meas.AcquireState.detector_id, meas.AcquireState.item_type);
AnalysisMethods am;
bool found = CentralizedState.App.DB.DetectorMaterialAnalysisMethods.TryGetValue(sel, out am);
if (found)
{
am.selector = sel; // gotta do this so that the equality operator is not incorrect
meas.INCCAnalysisState.Methods = am;
}
else
{
meas.INCCAnalysisState.Methods = new AnalysisMethods(sel);
}
} // else use what was there
meas.InitializeContext(clearCounterResults: false);
meas.PrepareINCCResults();
System.Collections.IEnumerator iter = meas.CountingAnalysisResults.GetATypedParameterEnumerator(typeof(Multiplicity));
while (iter.MoveNext())
{
Multiplicity mkey = (Multiplicity)iter.Current;
try
{
MultiplicityCountingRes mcr = (MultiplicityCountingRes)meas.CountingAnalysisResults[mkey];
if (mcr.AB.Unset)
{
LMRawAnalysis.SDTMultiplicityCalculator.SetAlphaBeta(mkey, mcr); // works only if MaxBins is set
}
MeasOptionSelector mos = new MeasOptionSelector(meas.MeasOption, mkey);
INCCResult result = meas.INCCAnalysisState.Lookup(mos);
result.CopyFrom(mcr);
}
catch (Exception)
{
//logger.TraceEvent(LogLevels.Error, 4027, "PrepareINCCResults error: " + ex.Message);
}
}
// stratum look up, finds existing stratum by name
if (useCurCalibParams || meas.Stratum == null)
{
List <INCCDB.StratumDescriptor> sl = CentralizedState.App.DB.StrataList();
INCCDB.StratumDescriptor s = sl.Find(w => string.Compare(w.Desc.Name, meas.AcquireState.stratum_id.Name, true) == 0);
if (s == null)
{
meas.Stratum = new Stratum();
}
else
{
meas.Stratum = new Stratum(s.Stratum);
}
}
INCCResults.results_rec xres = new INCCResults.results_rec(meas);
meas.INCCAnalysisResults.TradResultsRec = xres;
CentralizedState.App.Opstate.Measurement = meas; // put the measurement definition on the global state
}
public static unsafe List<INCCTransferFile> XFerFromMeasurements(List<Measurement> meas)
{
List<INCCTransferFile> list = new List<INCCTransferFile>();
foreach (Measurement m in meas)
{
IEnumerator iter = m.CountingAnalysisResults.GetMultiplicityEnumerator();
while (iter.MoveNext()) // for each mkey, a seperate xfer file should be emitted
{
INCCTransferFile itf = new INCCTransferFile(NC.App.Loggers.Logger(LMLoggers.AppSection.Control), null);
itf.Name = MethodResultsReport.EightCharConvert(m.MeasDate) + "." + m.MeasOption.INCC5Suffix();
list.Add(itf);
itf.results_rec_list.Add(Result5.MoveResultsRec(m));
itf.results_status_list.Add(Result5.EncodeResultsStatus(m));
Multiplicity mkey = (Multiplicity)((KeyValuePair<SpecificCountingAnalyzerParams, object>)(iter.Current)).Key;
if (m.MeasOption >= AssaySelector.MeasurementOption.background && m.MeasOption <= AssaySelector.MeasurementOption.holdup)
{
MeasOptionSelector mos = new MeasOptionSelector(m.MeasOption, mkey);
if (m.MeasOption == AssaySelector.MeasurementOption.initial)
itf.method_results_list.Add(Result5.MoveInitSrc(m.INCCAnalysisResults, mos));
else if (m.MeasOption == AssaySelector.MeasurementOption.normalization)
itf.method_results_list.Add(Result5.MoveBias(m.INCCAnalysisResults, mos));
else if (m.MeasOption == AssaySelector.MeasurementOption.precision)
itf.method_results_list.Add(Result5.MovePrecision(m.INCCAnalysisResults, mos));
else if (m.MeasOption == AssaySelector.MeasurementOption.background)
itf.method_results_list.Add(Result5.MoveTruncBkg(m.INCCAnalysisState, mos)); // NEXT: tm bkg, special case, unfinished
else if (m.MeasOption == AssaySelector.MeasurementOption.verification || m.MeasOption == AssaySelector.MeasurementOption.calibration)
{
itf.method_results_list.Add(Result5.MoveCalCurve(m.INCCAnalysisState, mos));
itf.method_results_list.Add(Result5.MoveKnownA(m.INCCAnalysisState, mos));
itf.method_results_list.Add(Result5.MoveKnownM(m.INCCAnalysisState, mos));
itf.method_results_list.Add(Result5.MoveMult(m.INCCAnalysisState, mos));
itf.method_results_list.Add(Result5.MoveDEMult(m.INCCAnalysisState, mos));
itf.method_results_list.Add(Result5.MoveActPass(m.INCCAnalysisState, mos));
itf.method_results_list.Add(Result5.MoveCollar(m.INCCAnalysisState, mos));
itf.method_results_list.Add(Result5.MoveActive(m.INCCAnalysisState, mos));
itf.method_results_list.Add(Result5.MoveActiveMult(m.INCCAnalysisState, mos));
itf.method_results_list.Add(Result5.MoveCurium(m.INCCAnalysisState, mos));
itf.method_results_list.Add(Result5.MoveTruncMult(m.INCCAnalysisState, mos));
itf.method_results_list.Add(Result5.MoveTruncBkg(m.INCCAnalysisState, mos)); // todo: here too, or just for bkg measurement?
itf.method_results_list.Add(Result5.MoveAAS(m.INCCAnalysisState, mos));
}
}
foreach (Cycle c in m.Cycles)
{
itf.run_rec_list.Add(Result5.MoveCycleToRunRec(c, mkey));
}
if (m.MeasOption == AssaySelector.MeasurementOption.verification && m.INCCAnalysisState.Methods.HasMethod(AnalysisMethod.AddASource))
{
itf.InitCFRunLists();
int aasp = 0;
foreach (CycleList cl in m.CFCycles)
{
foreach(Cycle cfc in cl)
itf.CFrun_rec_list[aasp].Add(Result5.MoveCycleToRunRec(cfc, mkey));
aasp++;
}
}
}
}
return list;
}
internal static unsafe iresultsbase MoveAAS(INCCAnalysisState ias, MeasOptionSelector mos)
{
results_add_a_source_rec res = new results_add_a_source_rec();
INCCMethodResult result;
bool found = ias.Results.TryGetMethodResults(mos.MultiplicityParams, ias.Methods.selector, AnalysisMethod.AddASource, out result);
if (found)
{
INCCMethodResults.results_add_a_source_rec m = (INCCMethodResults.results_add_a_source_rec)result;
res.ad_dzero_cf252_doubles = m.dzero_cf252_doubles;
CopyTuples(m.sample_cf252_doubles, res.ad_sample_cf252_doubles, res.ad_sample_cf252_doubles_err, INCC.MAX_ADDASRC_POSITIONS);
TransferUtils.CopyDbls(m.sample_cf252_ratio, res.ad_sample_cf252_ratio);
res.ad_sample_avg_cf252_doubles = m.sample_avg_cf252_doubles.v;
res.ad_sample_avg_cf252_doubles_err = m.sample_avg_cf252_doubles.err;
res.ad_corr_doubles = m.corr_doubles.v;
res.ad_corr_doubles_err = m.corr_doubles.err;
res.ad_delta = m.delta.v;
res.ad_delta_err = m.delta.err;
res.ad_corr_factor = m.corr_factor.v;
res.ad_corr_factor_err = m.corr_factor.err;
res.ad_pu240e_mass = m.pu240e_mass.v;
res.ad_pu240e_mass_err = m.pu240e_mass.err;
res.ad_pu_mass = m.pu_mass.v;
res.ad_pu_mass_err = m.pu_mass.err;
res.ad_dcl_pu240e_mass = m.dcl_pu240e_mass;
res.ad_dcl_pu_mass = m.dcl_pu_mass;
res.ad_dcl_minus_asy_pu_mass = m.dcl_minus_asy_pu_mass.v;
res.ad_dcl_minus_asy_pu_mass_err = m.dcl_minus_asy_pu_mass.err;
res.ad_dcl_minus_asy_pu_mass_pct = m.dcl_minus_asy_pu_mass_pct;
StatePack(m.pass, res.ad_pass_fail);
res.ad_tm_corr_doubles = m.tm_corr_doubles.v;
res.ad_tm_corr_doubles_err = m.tm_corr_doubles.err;
res.ad_tm_doubles_bkg = m.tm_doubles_bkg.v;
res.ad_tm_doubles_bkg_err = m.tm_doubles_bkg.err;
res.ad_tm_uncorr_doubles = m.tm_uncorr_doubles.v;
res.ad_tm_uncorr_doubles_err = m.tm_uncorr_doubles.err;
res.ad_add_a_source_equation = (byte)m.methodParams.cev.cal_curve_equation;
res.ad_a_res = m.methodParams.cev.a;
res.ad_b_res = m.methodParams.cev.b;
res.ad_c_res = m.methodParams.cev.c;
res.ad_d_res = m.methodParams.cev.d;
res.ad_covar_ab_res = m.methodParams.cev.covar(Coeff.a, Coeff.b);
res.ad_covar_ac_res = m.methodParams.cev.covar(Coeff.a, Coeff.c);
res.ad_covar_ad_res = m.methodParams.cev.covar(Coeff.a, Coeff.d);
res.ad_covar_bc_res = m.methodParams.cev.covar(Coeff.b, Coeff.c);
res.ad_covar_bd_res = m.methodParams.cev.covar(Coeff.b, Coeff.d);
res.ad_covar_cd_res = m.methodParams.cev.covar(Coeff.c, Coeff.d);
res.ad_var_a_res = m.methodParams.cev.var_a;
res.ad_var_b_res = m.methodParams.cev.var_b;
res.ad_var_c_res = m.methodParams.cev.var_c;
res.ad_var_d_res = m.methodParams.cev.var_d;
res.ad_sigma_x_res = m.methodParams.cev.sigma_x;
TransferUtils.CopyDbls(m.methodParams.position_dzero, res.ad_position_dzero_res);
res.ad_dzero_avg_res = m.methodParams.dzero_avg;
byte[] b = new byte[INCC.DATE_TIME_LENGTH];
char[] a = m.methodParams.dzero_ref_date.ToString("yy.MM.dd").ToCharArray();
Encoding.ASCII.GetBytes(a, 0, a.Length, b, 0);
TransferUtils.Copy(b, res.ad_dzero_ref_date_res);
res.ad_num_runs_res = m.methodParams.num_runs;
res.ad_cf_a_res = m.methodParams.cf.a;
res.ad_cf_b_res = m.methodParams.cf.b;
res.ad_cf_c_res = m.methodParams.cf.c;
res.ad_cf_d_res = m.methodParams.cf.d;
res.ad_use_truncated_mult_res = (m.methodParams.use_truncated_mult ? 1 : 0);
res.ad_tm_weighting_factor_res = m.methodParams.tm_weighting_factor;
res.ad_tm_dbls_rate_upper_limit_res = m.methodParams.tm_dbls_rate_upper_limit;
StrToBytes(INCC.MAX_DETECTOR_ID_LENGTH, ias.Methods.selector.detectorid, res.ad_add_a_source_detector_id);
StrToBytes(INCC.MAX_ITEM_TYPE_LENGTH, ias.Methods.selector.material, res.ad_add_a_source_item_type);
}
return res;
}
/// <summary>
/// Finalize measurement instance content for analysis
/// Populate calibration parameters maps
/// </summary>
/// <param name="meas">The partially initialized measurement instance</param>
/// <param name="useCurCalibParams">Default behavior is to use active method and other calibration parameters;
/// skipped if Reanalysis prepared the details from database measurement results
/// </param>
public static void FillInReanalysisRemainingDetails(Measurement meas, bool useCurCalibParams = true)
{
// get the current INCC5 analysis methods
if (useCurCalibParams || meas.INCCAnalysisState == null)
{
meas.INCCAnalysisState = new INCCAnalysisState();
INCCSelector sel = new INCCSelector(meas.AcquireState.detector_id, meas.AcquireState.item_type);
AnalysisMethods am;
bool found = CentralizedState.App.DB.DetectorMaterialAnalysisMethods.TryGetValue(sel, out am);
if (found)
{
am.selector = sel; // gotta do this so that the equality operator is not incorrect
meas.INCCAnalysisState.Methods = am;
}
else
meas.INCCAnalysisState.Methods = new AnalysisMethods(sel);
} // else use what was there
meas.InitializeContext(clearCounterResults:false);
meas.PrepareINCCResults();
System.Collections.IEnumerator iter = meas.CountingAnalysisResults.GetATypedParameterEnumerator(typeof(Multiplicity));
while (iter.MoveNext())
{
Multiplicity mkey = (Multiplicity)iter.Current;
try
{
MultiplicityCountingRes mcr = (MultiplicityCountingRes)meas.CountingAnalysisResults[mkey];
if (mcr.AB.Unset)
LMRawAnalysis.SDTMultiplicityCalculator.SetAlphaBeta(mkey, mcr); // works only if MaxBins is set
MeasOptionSelector mos = new MeasOptionSelector(meas.MeasOption, mkey);
INCCResult result = meas.INCCAnalysisState.Lookup(mos);
result.CopyFrom(mcr);
}
catch (Exception)
{
//logger.TraceEvent(LogLevels.Error, 4027, "PrepareINCCResults error: " + ex.Message);
}
}
// stratum look up, finds existing stratum by name
if (useCurCalibParams || meas.Stratum == null)
{
List<INCCDB.StratumDescriptor> sl = CentralizedState.App.DB.StrataList();
INCCDB.StratumDescriptor s = sl.Find(w => string.Compare(w.Desc.Name, meas.AcquireState.stratum_id.Name, true) == 0);
if (s == null)
meas.Stratum = new Stratum();
else
meas.Stratum = new Stratum(s.Stratum);
}
INCCResults.results_rec xres = new INCCResults.results_rec(meas);
meas.INCCAnalysisResults.TradResultsRec = xres;
CentralizedState.App.Opstate.Measurement = meas; // put the measurement definition on the global state
}
internal static unsafe iresultsbase MoveActiveMult(INCCAnalysisState ias, MeasOptionSelector mos)
{
results_active_mult_rec res = new results_active_mult_rec();
INCCMethodResult result;
bool found = ias.Results.TryGetMethodResults(mos.MultiplicityParams, ias.Methods.selector, AnalysisMethod.ActiveMultiplicity, out result);
if (found)
{
INCCMethodResults.results_active_mult_rec m = (INCCMethodResults.results_active_mult_rec)result;
res.am_mult = m.mult.v;
res.am_mult_err = m.mult.err;
res.am_vt1_res = m.methodParams.vt1;
res.am_vt2_res = m.methodParams.vt2;
res.am_vt3_res = m.methodParams.vt3;
res.am_vf1_res = m.methodParams.vf1;
res.am_vf2_res = m.methodParams.vf2;
res.am_vf3_res = m.methodParams.vf3;
StrToBytes(INCC.MAX_DETECTOR_ID_LENGTH, ias.Methods.selector.detectorid, res.am_mult_detector_id);
StrToBytes(INCC.MAX_ITEM_TYPE_LENGTH, ias.Methods.selector.material, res.am_mult_item_type);
}
return res;
}
protected Section ConstructReportSection(INCCReportSection section, MeasOptionSelector moskey, INCCResult ir, Detector det)
{
INCCStyleSection sec = null;
try
{
switch (section)
{
// NEXT: in progress, an identical copy of full INCC report sections
case INCCReportSection.SummedRawData:
sec = new INCCStyleSection(null, 1, INCCStyleSection.ReportSection.Summary);
sec.SetFPCurrentFormatPrecision(0);
sec.AddHeader(String.Format("{0} summed raw data",meas.INCCAnalysisState.Methods.HasActiveSelected() || meas.INCCAnalysisState.Methods.HasActiveMultSelected()?"Active":"Passive")); // section header
sec.AddNumericRow("Shift register singles sum:", meas.SinglesSum);
sec.AddNumericRow("Shift register reals + accidentals sum:", ir.RASum);
sec.AddNumericRow("Shift register accidentals sum:", ir.ASum);
if (!det.Id.source.UsingVirtualSRCounting(det.Id.SRType))
{
sec.AddNumericRow("Shift register 1st scaler sum:", ir.S1Sum);
sec.AddNumericRow("Shift register 2nd scaler sum:", ir.S2Sum);
}
break;
case INCCReportSection.SummedRA:
sec = new INCCStyleSection(null, 1, INCCStyleSection.ReportSection.MultiColumn);
sec.AddHeader(String.Format("{0} summed multiplicity distributions",meas.INCCAnalysisState.Methods.HasActiveSelected() || meas.INCCAnalysisState.Methods.HasActiveMultSelected()?"Active":"Passive")); // section header
int[] srawidths = new int[] { 5, 12, 12 };
int minbin, maxbin;
minbin = Math.Min(ir.RAMult.Length, ir.NormedAMult.Length);
maxbin = Math.Max(ir.RAMult.Length, ir.NormedAMult.Length);
sec.AddColumnRowHeader(new string[] { " ", "R+A sums", "A sums" }, srawidths);
for (int i = 0; i < minbin; i++)
sec.AddColumnRow(new ulong[] { (ulong)i, ir.RAMult[i], ir.NormedAMult[i] }, srawidths);
for (int i = minbin; i < maxbin; i++) // check for uneven column
{
ulong[] potential = new ulong[3];
potential[0] = (ulong)i;
if (i < ir.RAMult.Length)
potential[1] = ir.RAMult[i];
if (i < ir.NormedAMult.Length)
potential[2] = ir.NormedAMult[i];
sec.AddColumnRow(potential, srawidths);
}
break;
case INCCReportSection.MassResults:
sec = new INCCStyleSection(null, 1, INCCStyleSection.ReportSection.MethodResults);
//Results are not always passive. Boo.
sec.AddHeader(String.Format("{0} Results",meas.INCCAnalysisState.Methods.HasActiveSelected() || meas.INCCAnalysisState.Methods.HasActiveMultSelected()?"Active":"Passive")); // section header
sec.AddNumericRow("Singles:", ir.DeadtimeCorrectedSinglesRate);
sec.AddNumericRow("Doubles:", ir.DeadtimeCorrectedDoublesRate);
sec.AddNumericRow("Triples:", ir.DeadtimeCorrectedTriplesRate);
//changed to DTC rates. Raw rates meaningless here hn 11.5.2014
//sec.AddNumericRow("Quads:", mcr.DeadtimeCorrectedQuadsRate); // todo: quads delayed until pents are ready per DN
if (!det.Id.source.UsingVirtualSRCounting(det.Id.SRType))
{
sec.AddNumericRow("Scaler 1:", ir.Scaler1);
sec.AddNumericRow("Scaler 2:", ir.Scaler2);
}
//if (det.Id.SRType >= LMDAQ.InstrType.NPOD)
//{
// sec.Add(new Row()); // blank line
// sec.AddNumericRow("Dyt. Singles:", ir.DytlewskiCorrectedSinglesRate);
// sec.AddNumericRow("Dyt. Doubles:", ir.DytlewskiCorrectedDoublesRate);
// sec.AddNumericRow("Dyt. Triples:", ir.DytlewskiCorrectedTriplesRate);
//}
break;
case INCCReportSection.MethodResultsAndParams:
// ir contains the measurement option-specific results: empty for rates and holdup, and also empty for calib and verif, the method-focused analyses,
// but values are present for initial, normalization, precision, and should be present for background for the tm bkg results
List<Row> rl = ir.ToLines(meas);
sec = new INCCStyleSection(null, 0, INCCStyleSection.ReportSection.MethodResults);
sec.AddRange(rl);
switch (meas.MeasOption)
{
case AssaySelector.MeasurementOption.background:
if (meas.Background.TMBkgParams.ComputeTMBkg)
ctrllog.TraceEvent(LogLevels.Warning, 82010, "Background truncated multiplicity"); // todo: present the tm bkg results on m.Background
break;
case AssaySelector.MeasurementOption.initial:
case AssaySelector.MeasurementOption.normalization:
case AssaySelector.MeasurementOption.precision:
break;
case AssaySelector.MeasurementOption.verification:
case AssaySelector.MeasurementOption.calibration:
{
INCCMethodResults imrs;
bool beendonegot = meas.INCCAnalysisResults.TryGetINCCResults(moskey.MultiplicityParams, out imrs);
if (beendonegot && imrs.Count > 0) // should be true for verification and calibration
{
// we've got a distinct detector id and material type on the methods, so that is the indexer here
Dictionary<AnalysisMethod, INCCMethodResult> amimr = imrs[meas.INCCAnalysisState.Methods.selector];
// now get an enumerator over the map of method results
Dictionary<AnalysisMethod, INCCMethodResult>.Enumerator ai = amimr.GetEnumerator();
while (ai.MoveNext())
{
INCCMethodResult imr = ai.Current.Value;
// show the primaryMethod
if (ai.Current.Key.Equals(imrs.primaryMethod))
{
sec.Add(new Row());
Row rh = new Row();
rh.Add(0, " PRIMARY RESULT");
sec.Add(rh);
}
rl = imr.ToLines(meas);
sec.AddRange(rl);
// todo: optional use of END_PRIMARY_RESULT as in some INCC report formats, but not others
}
}
}
break;
case AssaySelector.MeasurementOption.rates:
case AssaySelector.MeasurementOption.holdup:
case AssaySelector.MeasurementOption.unspecified:
default: // nothing new to present with these
break;
}
break;
case INCCReportSection.RawCycles:
sec = new INCCStyleSection(null, 1, INCCStyleSection.ReportSection.MultiColumn);
sec.AddHeader(String.Format("{0} cycle raw data",meas.INCCAnalysisState.Methods.HasActiveSelected() || meas.INCCAnalysisState.Methods.HasActiveMultSelected()?"Active":"Passive")); // section header
int[] crdwidths = new int[] { 5, 10, 10, 10, 10, 10, 10 };
sec.AddColumnRowHeader(new string[] { "Cycle", "Singles", "R+A ", "A ", "Scaler1", "Scaler2", "QC Tests" }, crdwidths);
foreach (Cycle cyc in meas.Cycles)
{
// if no results on the cycle, these map indexers throw
if (cyc.CountingAnalysisResults.GetResultsCount(typeof(Multiplicity)) > 0) // if no results on the cycle, these map indexers throw
{
MultiplicityCountingRes mcr = (MultiplicityCountingRes)cyc.CountingAnalysisResults[moskey.MultiplicityParams];
sec.AddCycleColumnRow(cyc.seq,
new ulong[] { (ulong)mcr.Totals, (ulong)mcr.RASum, (ulong)mcr.ASum, (ulong)mcr.Scaler1.v, (ulong)mcr.Scaler2.v },
meas.AcquireState.qc_tests?cyc.QCStatus(moskey.MultiplicityParams).INCCString():"Off", crdwidths);
}
}
break;
case INCCReportSection.DTCRateCycles:
sec = new INCCStyleSection(null, 1, INCCStyleSection.ReportSection.MultiColumn);
sec.AddHeader(String.Format("{0} cycle DTC rate data",meas.AcquireState.well_config == WellConfiguration.Active?"Active":"Passive")); // section header
int[] crawidths = new int[] { 5, 13, 13, 13, 13, 10 };
sec.AddColumnRowHeader(new string[] { "Cycle", "Singles", "Doubles", "Triples", "Mass", "QC Tests" }, crawidths);
foreach (Cycle cyc in meas.Cycles)
{
if (cyc.CountingAnalysisResults.GetResultsCount(typeof(Multiplicity)) > 0) // if no results on the cycle, these map indexers throw
{
MultiplicityCountingRes mcr = (MultiplicityCountingRes)cyc.CountingAnalysisResults[moskey.MultiplicityParams];
//These debug rows show raw rates for comparison hn 10.30
//sec.AddCycleColumnRow(cyc.seq,
//Again, could be wrong.
// new double[] { mcr.RawSinglesRate.v, mcr.RawDoublesRate.v, -1, -1 },
// cyc.QCStatus(moskey.MultiplicityParams).INCCString(), crawidths);
//Again, could be wrong.
// TODO: Am actually printing out the DTC rates per cycle. This seems to work in all cases EXCEPT "precision" hn 11.5
sec.AddCycleColumnRow(cyc.seq,
// Using the corrected rates!
new double[] { mcr.DeadtimeCorrectedSinglesRate.v, mcr.DeadtimeCorrectedDoublesRate.v, mcr.DeadtimeCorrectedTriplesRate.v, mcr.mass/*Mass*/ },
meas.AcquireState.qc_tests?cyc.QCStatus(moskey.MultiplicityParams).INCCString():"Off", crawidths);
}
}
break;
case INCCReportSection.MultiplicityDistributions:
sec = new INCCStyleSection(null, 1, INCCStyleSection.ReportSection.MultiColumn);
sec.AddHeader(String.Format("{0} multiplicity distributions for each cycle",meas.INCCAnalysisState.Methods.HasActiveSelected() || meas.INCCAnalysisState.Methods.HasActiveMultSelected()?"Active":"Passive")); // section header
int[] csrawidths = new int[] { 6, 12, 12 };
foreach (Cycle cyc in meas.Cycles)
{
if (cyc.CountingAnalysisResults.GetResultsCount(typeof(Multiplicity)) > 0) // if no results on the cycle, these map indexers throw
{
MultiplicityCountingRes mcr = (MultiplicityCountingRes)cyc.CountingAnalysisResults[moskey.MultiplicityParams];
minbin = Math.Min(mcr.RAMult.Length, mcr.NormedAMult.Length);
maxbin = Math.Max(mcr.RAMult.Length, mcr.NormedAMult.Length);
sec.AddColumnRowHeader(new string[] { "Cycle " + cyc.seq, "R+A ", "A " }, csrawidths);
for (int i = 0; i < minbin; i++)
sec.AddColumnRow(new ulong[] { (ulong)i, mcr.RAMult[i], mcr.NormedAMult[i] }, csrawidths);
for (int i = minbin; i < maxbin; i++) // check for uneven column
{
ulong[] potential = new ulong[3];
potential[0] = (ulong)i;
if (i < mcr.RAMult.Length)
potential[1] = mcr.RAMult[i];
if (i < mcr.NormedAMult.Length)
potential[2] = mcr.NormedAMult[i];
sec.AddColumnRow(potential, csrawidths);
}
}
sec.Add(new Row());// blank
}
break;
default:
break;
}
}
catch (Exception e)
{
ctrllog.TraceException(e);
}
return sec;
}
internal static unsafe iresultsbase MoveActPass(INCCAnalysisState ias, MeasOptionSelector mos)
{
results_active_passive_rec res = new results_active_passive_rec();
INCCMethodResult result;
bool found = ias.Results.TryGetMethodResults(mos.MultiplicityParams, ias.Methods.selector, AnalysisMethod.ActivePassive, out result);
if (found)
{
INCCMethodResults.results_active_passive_rec m = (INCCMethodResults.results_active_passive_rec)result;
res.ap_delta_doubles = m.delta_doubles.v;
res.ap_delta_doubles_err = m.delta_doubles.err;
res.ap_u235_mass = m.u235_mass.v;
res.ap_u235_mass_err = m.u235_mass.err;
res.ap_k0 = m.k0.v;
res.ap_k1 = m.k1.v;
res.ap_k1_err = m.k1.err;
res.ap_k = m.k.v;
res.ap_k_err = m.k.err;
res.ap_dcl_u235_mass = m.dcl_u235_mass;
res.ap_dcl_minus_asy_u235_mass = m.dcl_minus_asy_u235_mass.v;
res.ap_dcl_minus_asy_u235_mass_err = m.dcl_minus_asy_u235_mass.err;
res.ap_dcl_minus_asy_u235_mass_pct = m.dcl_minus_asy_u235_mass_pct;
StatePack(m.pass, res.ap_pass_fail);
res.ap_active_passive_equation = (byte)m.methodParams.cev.cal_curve_equation;
res.ap_a_res = m.methodParams.cev.a;
res.ap_b_res = m.methodParams.cev.b;
res.ap_c_res = m.methodParams.cev.c;
res.ap_d_res = m.methodParams.cev.d;
res.ap_covar_ab_res = m.methodParams.cev.covar(Coeff.a, Coeff.b);
res.ap_covar_ac_res = m.methodParams.cev.covar(Coeff.a, Coeff.c);
res.ap_covar_ad_res = m.methodParams.cev.covar(Coeff.a, Coeff.d);
res.ap_covar_bc_res = m.methodParams.cev.covar(Coeff.b, Coeff.c);
res.ap_covar_bd_res = m.methodParams.cev.covar(Coeff.b, Coeff.d);
res.ap_covar_cd_res = m.methodParams.cev.covar(Coeff.c, Coeff.d);
res.ap_var_a_res = m.methodParams.cev.var_a;
res.ap_var_b_res = m.methodParams.cev.var_b;
res.ap_var_c_res = m.methodParams.cev.var_c;
res.ap_var_d_res = m.methodParams.cev.var_d;
res.ap_sigma_x_res = m.methodParams.cev.sigma_x;
StrToBytes(INCC.MAX_DETECTOR_ID_LENGTH, ias.Methods.selector.detectorid, res.ap_active_passive_detector_id);
StrToBytes(INCC.MAX_ITEM_TYPE_LENGTH, ias.Methods.selector.material, res.ap_active_passive_item_type);
}
return res;
}
protected Section ConstructReportSection(INCCTestDataSection section, Detector det, MeasOptionSelector moskey = null)
{
INCCTestDataStyle sec = null;
try
{
switch (section)
{
case INCCTestDataSection.CycleSummary:
sec = new INCCTestDataStyle(null, 0);
sec.AddOne( (Int32)meas.Cycles.GetValidCycleCountForThisKey(moskey.MultiplicityParams)); // could also use CycleList length but CycleList can be longer when a reanalysis occurs and the analysis processing stops short of the end of the list due to modified termination conditions
sec.AddOne( (Int32)(meas.Cycles.Count > 0 ? meas.Cycles[0].TS.TotalSeconds : 0.0));
break;
default:
break;
}
}
catch (Exception e)
{
ctrllog.TraceException(e);
}
return sec;
}
// Based on the measurement type and result, show a bunch of stuff
void FieldFiller()
{
Measurement m = N.App.Opstate.Measurement;
int rep = m.CountingAnalysisResults.GetResultsCount(typeof(Multiplicity));
int i = 0;
IEnumerator iter = m.CountingAnalysisResults.GetMultiplicityEnumerator();
while (iter.MoveNext())
{
i++;
string augmenter = (rep > 1 ? " " + i.ToString() : ""); // use mkey indicator here, not just this indexer
Multiplicity mkey = (Multiplicity)((KeyValuePair <SpecificCountingAnalyzerParams, object>)(iter.Current)).Key;
INCCResult r;
MeasOptionSelector moskey = new MeasOptionSelector(m.MeasOption, mkey);
bool found = m.INCCAnalysisResults.TryGetValue(moskey, out r); // APluralityOfMultiplicityAnalyzers:
switch (m.MeasOption)
{
case AssaySelector.MeasurementOption.rates:
case AssaySelector.MeasurementOption.background:
//if (passive)
listView1.Items.Add(new ListViewItem(new string[] { "Passive rates" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Singles: {0,13:F3} +- {1,9:F3}", r.DeadtimeCorrectedSinglesRate.v, r.DeadtimeCorrectedSinglesRate.err)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Doubles: {0,13:F3} +- {1,9:F3}", r.DeadtimeCorrectedDoublesRate.v, r.DeadtimeCorrectedDoublesRate.err)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Triples: {0,13:F3} +- {1,9:F3}", r.DeadtimeCorrectedTriplesRate.v, r.DeadtimeCorrectedTriplesRate.err)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Scaler 1: {0,13:F3} +- {1,9:F3}", r.Scaler1Rate.v, r.Scaler1Rate.err)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Scaler 2: {0,13:F3} +- {1,9:F3}", r.Scaler2Rate.v, r.Scaler2Rate.err)
}));
//if (active)
break;
case AssaySelector.MeasurementOption.initial:
INCCResults.results_init_src_rec isr = (INCCResults.results_init_src_rec)r;
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Source id: {0}", isr.init_src_id)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Initial source measurement: {0}", (isr.pass ? "passed" : "failed"))
}));
break;
case AssaySelector.MeasurementOption.normalization:
INCCResults.results_bias_rec br = (INCCResults.results_bias_rec)r;
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Normalization results for reference source: {0}", br.sourceId)
}));
if (br.mode == NormTest.Cf252Doubles)
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Normalization doubles rate expected/measured: {0,13:F3} +- {1,9:F3}",
br.biasDblsRateExpectMeas.v, br.biasDblsRateExpectMeas.err)
}));
}
else if (br.mode == NormTest.Cf252Singles)
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Normalization singles rate expected/measured: {0,13:F3} +- {1,9:F3}",
br.biasDblsRateExpectMeas.v, br.biasDblsRateExpectMeas.err)
}));
}
else
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Normalization singles rate expected/measured: {0,13:F3} +- {1,9:F3}",
br.biasSnglsRateExpectMeas.v, br.biasSnglsRateExpectMeas.err)
}));
}
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Normalization test {0}", (br.pass ? "passed" : "failed"))
}));
break;
case AssaySelector.MeasurementOption.precision:
INCCResults.results_precision_rec pr = (INCCResults.results_precision_rec)r;
listView1.Items.Add(new ListViewItem(new string[] { "Precision results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Chi-square lower limit: {0,13:F3}", pr.chiSqLowerLimit)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Chi-square upper limit: {0,13:F3}", pr.chiSqUpperLimit)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Sample variance: {0,13:F3}", pr.precSampleVar)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Theoretical variance: {0,13:F3}", pr.precTheoreticalVar)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Chi-square: {0,13:F3}", pr.precChiSq)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Precision test {0}.", (pr.pass ? "passed" : "failed"))
}));
break;
case AssaySelector.MeasurementOption.calibration:
INCCMethodResults imrs;
bool ok = m.INCCAnalysisResults.TryGetINCCResults(moskey.MultiplicityParams, out imrs);
if (ok && imrs.Count > 0) // should be true for verification and calibration
{
// we've got a distinct detector id and material type on the methods, so that is the indexer here
Dictionary <AnalysisMethod, INCCMethodResult> amimr = imrs[m.INCCAnalysisState.Methods.selector];
// now get an enumerator over the map of method results
Dictionary <AnalysisMethod, INCCMethodResult> .Enumerator ai = amimr.GetEnumerator();
while (ai.MoveNext())
{
INCCMethodResult imr = ai.Current.Value;
if (imr is INCCMethodResults.results_cal_curve_rec)
{
listView1.Items.Add(new ListViewItem(new string[] { "Passive calibration curve results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Pu mass: {0,13:F3}", ((INCCMethodResults.results_cal_curve_rec)imr).pu_mass.v)
}));
}
else if (imr is INCCMethodResults.results_known_alpha_rec)
{
listView1.Items.Add(new ListViewItem(new string[] { "Known alpha results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Multiplication: {0,13:F3}", ((INCCMethodResults.results_known_alpha_rec)imr).mult)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Alpha: {0,13:F3}", ((INCCMethodResults.results_known_alpha_rec)imr).alphaK)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Pu mass: {0,13:F3}", ((INCCMethodResults.results_known_alpha_rec)imr).pu_mass.v)
}));
}
else if (imr is INCCMethodResults.results_add_a_source_rec)
{
listView1.Items.Add(new ListViewItem(new string[] { "Add-a-source results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Pu mass: {0,13:F3}", ((INCCMethodResults.results_add_a_source_rec)imr).pu_mass.v)
}));
}
else if (imr is INCCMethodResults.results_active_rec)
{
listView1.Items.Add(new ListViewItem(new string[] { "Active calibration curve results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" U235 mass: {0,13:F3}", ((INCCMethodResults.results_active_rec)imr).u235_mass.v)
}));
}
}
}
break;
case AssaySelector.MeasurementOption.verification:
case AssaySelector.MeasurementOption.holdup:
INCCMethodResults imrvs;
bool okv = m.INCCAnalysisResults.TryGetINCCResults(moskey.MultiplicityParams, out imrvs);
if (okv && imrvs.Count > 0) // should be true for verification and calibration
{
// we've got a distinct detector id and material type on the methods, so that is the indexer here
Dictionary <AnalysisMethod, INCCMethodResult> amimr = imrvs[m.INCCAnalysisState.Methods.selector];
// now get an enumerator over the map of method results
Dictionary <AnalysisMethod, INCCMethodResult> .Enumerator ai = amimr.GetEnumerator();
while (ai.MoveNext())
{
INCCMethodResult imr = ai.Current.Value;
if (imr is INCCMethodResults.results_cal_curve_rec)
{
INCCMethodResults.results_cal_curve_rec d = (INCCMethodResults.results_cal_curve_rec)imr;
listView1.Items.Add(new ListViewItem(new string[] { "Passive calibration curve results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Pu mass: {0,13:F3} +- {1,9:F3}", d.pu_mass.v, d.pu_mass.err)
}));
if (d.dcl_pu_mass > 0)
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Declared Pu mass: {0,13:F3}", d.dcl_pu_mass)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Declared - assay Pu mass: {0,13:F3} +- {1,9:F3} or {2,6:F2}%",
d.dcl_minus_asy_pu_mass.v, d.dcl_minus_asy_pu_mass.err, d.dcl_minus_asy_pu_mass_pct)
}));
}
}
else if (imr is INCCMethodResults.results_known_alpha_rec)
{
INCCMethodResults.results_known_alpha_rec d = (INCCMethodResults.results_known_alpha_rec)imr;
listView1.Items.Add(new ListViewItem(new string[] { "Known alpha results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Multiplication: {0,13:F3}", d.mult)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Alpha: {0,13:F3}", d.alphaK)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Pu mass: {0,13:F3} +- {1,9:F3}", d.pu_mass.v, d.pu_mass.err)
}));
if (d.dcl_pu_mass > 0)
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Declared Pu mass: {0,13:F3}", d.dcl_pu_mass)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Declared - assay Pu mass: {0,13:F3} +- {1,9:F3} or {2,6:F2}%",
d.dcl_minus_asy_pu_mass.v, d.dcl_minus_asy_pu_mass.err, d.dcl_minus_asy_pu_mass_pct)
}));
}
}
else if (imr is INCCMethodResults.results_known_m_rec)
{
INCCMethodResults.results_known_m_rec d = (INCCMethodResults.results_known_m_rec)imr;
listView1.Items.Add(new ListViewItem(new string[] { "Known M results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Multiplication: {0,13:F3}", d.mult)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Alpha: {0,13:F3}", d.alpha)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Pu mass: {0,13:F3} +- {1,9:F3}", d.pu_mass.v, d.pu_mass.err)
}));
if (d.dcl_pu_mass > 0)
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Declared Pu mass: {0,13:F3}", d.dcl_pu_mass)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Declared - assay Pu mass: {0,13:F3} +- {1,9:F3} or {2,6:F2}%",
d.dcl_minus_asy_pu_mass.v, d.dcl_minus_asy_pu_mass.err, d.dcl_minus_asy_pu_mass_pct)
}));
}
}
else if (imr is INCCMethodResults.results_multiplicity_rec)
{
INCCMethodResults.results_multiplicity_rec d = (INCCMethodResults.results_multiplicity_rec)imr;
listView1.Items.Add(new ListViewItem(new string[] { "Passive multiplicity results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Multiplication: {0,13:F3} +- {1,9:F3}", d.mult.v, d.mult.err)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Alpha: {0,13:F3} +- {1,9:F3}", d.alphaK.v, d.alphaK.err)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Correction factor: {0,13:F3}", d.corr_factor.v, d.corr_factor.err)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Pu mass: {0,13:F3} +- {1,9:F3}", d.pu_mass.v, d.pu_mass.err)
}));
if (d.dcl_pu_mass > 0)
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Declared Pu mass: {0,13:F3}", d.dcl_pu_mass)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Declared - assay Pu mass: {0,13:F3} +- {1,9:F3} or {2,6:F2}%",
d.dcl_minus_asy_pu_mass.v, d.dcl_minus_asy_pu_mass.err, d.dcl_minus_asy_pu_mass_pct)
}));
}
}
else if (imr is INCCMethodResults.results_add_a_source_rec)
{
INCCMethodResults.results_add_a_source_rec d = (INCCMethodResults.results_add_a_source_rec)imr;
listView1.Items.Add(new ListViewItem(new string[] { "Add-a-source results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Delta: {0,13:F3} +- {1,9:F3}", d.delta.v, d.delta.err)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Correction factor: {0,13:F3}", d.corr_factor.v, d.corr_factor.err)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Pu mass: {0,13:F3} +- {1,9:F3}", d.pu_mass.v, d.pu_mass.err)
}));
if (d.dcl_pu_mass > 0)
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Declared Pu mass: {0,13:F3}", d.dcl_pu_mass)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Declared - assay Pu mass: {0,13:F3} +- {1,9:F3} or {2,6:F2}%",
d.dcl_minus_asy_pu_mass.v, d.dcl_minus_asy_pu_mass.err, d.dcl_minus_asy_pu_mass_pct)
}));
}
}
else if (imr is INCCMethodResults.results_curium_ratio_rec)
{
INCCMethodResults.results_curium_ratio_rec d = (INCCMethodResults.results_curium_ratio_rec)imr;
listView1.Items.Add(new ListViewItem(new string[] { "Curium ratio results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Cm mass: {0,13:F3} +- {1,9:F3}", d.cm_mass.v, d.cm_mass.err)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Pu mass: {0,13:F3} +- {1,9:F3}", d.pu.pu_mass.v, d.pu.pu_mass.err)
}));
if (d.pu.dcl_pu_mass > 0)
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Declared Pu mass: {0,13:F3}", d.pu.dcl_pu_mass)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Declared - assay Pu mass: {0,13:F3} +- {1,9:F3} or {2,6:F2}%",
d.pu.dcl_minus_asy_pu_mass.v, d.pu.dcl_minus_asy_pu_mass.err, d.pu.dcl_minus_asy_pu_mass_pct)
}));
}
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" U mass: {0,13:F3} +- {1,9:F3}", d.u.mass.v, d.u.mass.err)
}));
if (d.u.dcl_mass > 0)
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Declared U mass: {0,13:F3}", d.u.dcl_mass)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Declared - assay U mass: {0,13:F3} +- {1,9:F3} or {2,6:F2}%",
d.u.dcl_minus_asy_mass.v, d.u.dcl_minus_asy_mass.err, d.u.dcl_minus_asy_mass_pct)
}));
}
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Declared U235 mass: {0,13:F3} +- {1,9:F3}", d.u235.mass.v, d.u235.mass.err)
}));
if (d.u235.dcl_mass > 0)
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Declared U235 mass: {0,13:F3}", d.u235.dcl_mass)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Decl - assay U235 mass: {0,13:F3} +- {1,9:F3} or {2,6:F2}%",
d.u235.dcl_minus_asy_mass.v, d.u235.dcl_minus_asy_mass.err, d.u235.dcl_minus_asy_mass_pct)
}));
}
}
else if (imr is INCCMethodResults.results_truncated_mult_rec)
{
INCCMethodResults.results_truncated_mult_rec d = (INCCMethodResults.results_truncated_mult_rec)imr;
if (d.methodParams.known_eff)
{
listView1.Items.Add(new ListViewItem(new string[] { "Known efficiency truncated multiplicity results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Pu mass: {0,13:F3} +- {1,9:F3}", d.k.pu_mass.v, d.k.pu_mass.err)
}));
if (d.k.dcl_pu_mass > 0)
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Declared Pu mass: {0,13:F3}", d.k.dcl_pu_mass)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Declared - assay Pu mass: {0,13:F3} +- {1,9:F3} or {2,6:F2}%",
d.k.dcl_minus_asy_pu_mass.v, d.k.dcl_minus_asy_pu_mass.err, d.k.dcl_minus_asy_pu_mass_pct)
}));
}
}
if (d.methodParams.solve_eff)
{
listView1.Items.Add(new ListViewItem(new string[] { "Solve efficiency truncated multiplicity results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Pu mass: {0,13:F3} +- {1,9:F3}", d.s.pu_mass.v, d.s.pu_mass.err)
}));
if (d.s.dcl_pu_mass > 0)
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Declared Pu mass: {0,13:F3}", d.s.dcl_pu_mass)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Declared - assay Pu mass: {0,13:F3} +- {1,9:F3} or {2,6:F2}%",
d.s.dcl_minus_asy_pu_mass.v, d.s.dcl_minus_asy_pu_mass.err, d.s.dcl_minus_asy_pu_mass_pct)
}));
}
}
}
else if (imr is INCCMethodResults.results_active_rec)
{
INCCMethodResults.results_active_rec d = (INCCMethodResults.results_active_rec)imr;
listView1.Items.Add(new ListViewItem(new string[] { "Active calibration curve results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" U235 mass: {0,13:F3} +- {1,9:F3}", d.u235_mass.v, d.u235_mass.err)
}));
if (d.dcl_u235_mass > 0)
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Declared U235 mass: {0,13:F3}", d.dcl_u235_mass)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Declared - assay U235 mass: {0,13:F3} +- {1,9:F3} or {2,6:F2}%",
d.dcl_minus_asy_u235_mass.v, d.dcl_minus_asy_u235_mass.err, d.dcl_minus_asy_u235_mass_pct)
}));
}
}
else if (imr is INCCMethodResults.results_active_passive_rec)
{
INCCMethodResults.results_active_passive_rec d = (INCCMethodResults.results_active_passive_rec)imr;
listView1.Items.Add(new ListViewItem(new string[] { "Active/passive results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" U235 mass: {0,13:F3} +- {1,9:F3}", d.u235_mass.v, d.u235_mass.err)
}));
if (d.dcl_u235_mass > 0)
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Declared U235 mass: {0,13:F3}", d.dcl_u235_mass)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Declared - assay U235 mass: {0,13:F3} +- {1,9:F3} or {2,6:F2}%",
d.dcl_minus_asy_u235_mass.v, d.dcl_minus_asy_u235_mass.err, d.dcl_minus_asy_u235_mass_pct)
}));
}
}
else if (imr is INCCMethodResults.results_collar_rec)
{
INCCMethodResults.results_collar_rec d = (INCCMethodResults.results_collar_rec)imr;
listView1.Items.Add(new ListViewItem(new string[] { "Collar results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" U235 mass: {0,13:F3} +- {1,9:F3}", d.u235_mass.v, d.u235_mass.err)
}));
if (d.dcl_total_u235.v > 0)
{
listView1.Items.Add(new ListViewItem(new string[] {
string.Format(" Declared U235 mass: {0,13:F3} +- {1,9:F3}", d.dcl_total_u235.v, d.dcl_total_u235.err)
}));
listView1.Items.Add(new ListViewItem(new string[] {
string.Format("Declared - assay U235 mass: {0,13:F3} +- {1,9:F3} or {2,6:F2}%",
d.dcl_minus_asy_u235_mass.v, d.dcl_minus_asy_u235_mass.err, d.dcl_minus_asy_u235_mass_pct)
}));
}
}
}
}
break;
case AssaySelector.MeasurementOption.unspecified:
listView1.Items.Add(new ListViewItem(new string[] { "List mode results" + augmenter }));
listView1.Items.Add(new ListViewItem(new string[] { "TODO " })); // todo: fill in with something useful for LM
break;
}
}
}