コード例 #1
0
ファイル: FrmKCJSB265.cs プロジェクト: JustinSunli/Compass
        public FrmKCJSB265(Drawing drawing, ModuleTree tree) : this()
        {
            objKCJSB265 = (KCJSB265)objKCJSB265Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
            if (objKCJSB265 == null)
            {
                return;
            }
            this.Text = drawing.ODPNo + " / Item: " + drawing.Item + " / Module: " + tree.Module + " - " + tree.CategoryName;
            Category objCategory = objCategoryService.GetCategoryByCategoryId(tree.CategoryId.ToString());

            pbModelImage.Image = objCategory.ModelImage.Length == 0
                ? Image.FromFile("NoPic.png")
                : (Image) new SerializeObjectToString().DeserializeObject(objCategory.ModelImage);
            FillData();
        }
コード例 #2
0
        public int EditModel(IModel model)
        {
            KCJSB265 objModel = (KCJSB265)model;
            //编写带参数的SQL语句
            StringBuilder sqlBuilder = new StringBuilder();

            sqlBuilder.Append("Update KCJSB265 set Length=@Length,ExRightDis=@ExRightDis,ExLength=@ExLength,ExWidth=@ExWidth,ExHeight=@ExHeight,");
            sqlBuilder.Append("FCType=@FCType,FCSide=@FCSide,FCSideLeft=@FCSideLeft,FCSideRight=@FCSideRight,FCBlindNo=@FCBlindNo,");
            sqlBuilder.Append("SSPType=@SSPType,Gutter=@Gutter,GutterWidth=@GutterWidth,ANSUL=@ANSUL,ANSide=@ANSide,ANDetector=@ANDetector,");
            sqlBuilder.Append("MARVEL=@MARVEL,Japan=@Japan where KCJSB265Id=@KCJSB265Id");
            //定义参数数组
            SqlParameter[] param = new SqlParameter[]
            {
                new SqlParameter("@Length", objModel.Length),
                new SqlParameter("@ExRightDis", objModel.ExRightDis),
                new SqlParameter("@ExLength", objModel.ExLength),
                new SqlParameter("@ExWidth", objModel.ExWidth),
                new SqlParameter("@ExHeight", objModel.ExHeight),
                new SqlParameter("@FCType", objModel.FCType),
                new SqlParameter("@FCSide", objModel.FCSide),
                new SqlParameter("@FCSideLeft", objModel.FCSideLeft),
                new SqlParameter("@FCSideRight", objModel.FCSideRight),
                new SqlParameter("@FCBlindNo", objModel.FCBlindNo),
                new SqlParameter("@SSPType", objModel.SSPType),
                new SqlParameter("@Gutter", objModel.Gutter),
                new SqlParameter("@GutterWidth", objModel.GutterWidth),
                new SqlParameter("@ANSUL", objModel.ANSUL),
                new SqlParameter("@ANSide", objModel.ANSide),
                new SqlParameter("@ANDetector", objModel.ANDetector),
                new SqlParameter("@MARVEL", objModel.MARVEL),
                new SqlParameter("@Japan", objModel.Japan),

                new SqlParameter("@KCJSB265Id", objModel.KCJSB265Id)
            };
            try
            {
                return(SQLHelper.Update(sqlBuilder.ToString(), param));
            }
            catch (SqlException ex)
            {
                throw new Exception("数据库操作出现异常:" + ex.Message);
            }
            catch (Exception ex)
            {
                throw ex;
            }
        }
コード例 #3
0
        public IModel GetModelByWhereSql(string whereSql)
        {
            string sql =
                "select KCJSB265Id,ModuleTreeId,Length,ExRightDis,ExLength,ExWidth,ExHeight," +
                "FCType,FCSide,FCSideLeft,FCSideRight,FCBlindNo,SSPType,Gutter,GutterWidth," +
                "ANSUL,ANSide,ANDetector,MARVEL,Japan from KCJSB265";

            sql += whereSql;
            SqlDataReader objReader = SQLHelper.GetReader(sql);
            KCJSB265      objModel  = null;

            if (objReader.Read())
            {
                objModel = new KCJSB265()
                {
                    KCJSB265Id   = Convert.ToInt32(objReader["KCJSB265Id"]),
                    ModuleTreeId = Convert.ToInt32(objReader["ModuleTreeId"]),
                    //最好不要用=null去判断,提示类型转换错误
                    Length     = objReader["Length"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["Length"]),
                    ExRightDis = objReader["ExRightDis"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ExRightDis"]),
                    ExLength   = objReader["ExLength"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ExLength"]),
                    ExWidth    = objReader["ExWidth"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ExWidth"]),
                    ExHeight   = objReader["ExHeight"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["ExHeight"]),

                    FCType      = objReader["FCType"].ToString().Length == 0 ? "" : objReader["FCType"].ToString(),
                    FCSide      = objReader["FCSide"].ToString().Length == 0 ? "" : objReader["FCSide"].ToString(),
                    FCSideLeft  = objReader["FCSideLeft"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["FCSideLeft"]),
                    FCSideRight = objReader["FCSideRight"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["FCSideRight"]),
                    FCBlindNo   = objReader["FCBlindNo"].ToString().Length == 0 ? 0 : Convert.ToInt32(objReader["FCBlindNo"]),

                    SSPType     = objReader["SSPType"].ToString().Length == 0 ? "" : objReader["SSPType"].ToString(),
                    Gutter      = objReader["Gutter"].ToString().Length == 0 ? "" : objReader["Gutter"].ToString(),
                    GutterWidth = objReader["GutterWidth"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["GutterWidth"]),

                    ANSUL      = objReader["ANSUL"].ToString().Length == 0 ? "" : objReader["ANSUL"].ToString(),
                    ANSide     = objReader["ANSide"].ToString().Length == 0 ? "" : objReader["ANSide"].ToString(),
                    ANDetector = objReader["ANDetector"].ToString().Length == 0 ? "" : objReader["ANDetector"].ToString(),
                    MARVEL     = objReader["MARVEL"].ToString().Length == 0 ? "" : objReader["MARVEL"].ToString(),
                    Japan      = objReader["Japan"].ToString().Length == 0 ? "" : objReader["Japan"].ToString(),
                };
            }
            objReader.Close();
            return(objModel);
        }
コード例 #4
0
        public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
        {
            //创建项目模型存放地址
            string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;

            if (!Directory.Exists(itemPath))
            {
                Directory.CreateDirectory(itemPath);
            }
            else
            {
                DialogResult result =
                    MessageBox.Show("模型文件夹" + itemPath + "存在,如果之前pack已经执行过,将不执行pack过程而是直接修改模型,如果要继续请点击YES,否请点击No中断作图", "提示信息",
                                    MessageBoxButtons.YesNo);
                if (result == DialogResult.No)
                {
                    return;
                }
            }
            //Pack的后缀
            string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
            //判断文件是否存在,如果存在将不执行pack,如果不存在则执行pack
            //packango后需要接收打包完成的地址,参数为后缀
            string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";

            if (!File.Exists(packedAssyPath))
            {
                packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
            }

            //查询参数
            KCJSB265 item = (KCJSB265)objKCJSB265Service.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());

            swApp.CommandInProgress = true; //告诉SolidWorks,现在是用外部程序调用命令
            int warnings = 0;
            int errors   = 0;

            suffix = "_" + suffix;//后缀
            ModelDoc2         swModel = default(ModelDoc2);
            ModelDoc2         swPart  = default(ModelDoc2);
            AssemblyDoc       swAssy  = default(AssemblyDoc);
            Component2        swComp;
            Feature           swFeat        = default(Feature);
            object            configNames   = null;
            ModelDocExtension swModelDocExt = default(ModelDocExtension);
            bool   status     = false;
            string compReName = string.Empty;

            //打开Pack后的模型
            swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
                                     (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
            swAssy = swModel as AssemblyDoc;                                                  //装配体
            string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称

            swModelDocExt = (ModelDocExtension)swModel.Extension;
            //打开装配体后必须重建,使Pack后的零件名都更新到带后缀的状态,否则程序出错
            swModel.ForceRebuild3(true);
            //TopOnly参数设置成true,只重建顶层,不重建零件内部

            /*注意SolidWorks单位是m,计算是应当/1000m
             * 整形与整形运算得出的结果仍然时整形,1640 / 1000m结果为0,因此必须将其中一个转化成decimal型,使用后缀m就可以了
             * (int)不进行四舍五入,Convert.ToInt32会四舍五入
             */
            //-----------计算中间值,----------
            int fcNo = (int)((item.Length - item.FCSideLeft - item.FCSideRight) / 499m) - item.FCBlindNo;

            try
            {
                //----------Top Level----------
                //判断FC数量,FC侧板长度
                if (item.FCBlindNo > 0)
                {
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-1"));
                    swComp.SetSuppression2(2);                                           //2解压缩,0压缩
                    swFeat = swAssy.FeatureByName("LocalLPattern3");
                    swFeat.SetSuppression2(1, 2, configNames);                           //参数1:1解压,0压缩
                    swModel.Parameter("D1@LocalLPattern3").SystemValue = item.FCBlindNo; //D1阵列数量,D3阵列距离
                    swModel.Parameter("D1@Distance11").SystemValue     = item.FCSideLeft / 1000m;
                }
                else
                {
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0107[BP-500]{500}-1"));
                    swComp.SetSuppression2(0);                 //2解压缩,0压缩
                    swFeat = swAssy.FeatureByName("LocalLPattern3");
                    swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                }
                //判断FC/KSA
                if (item.FCType == "KSA")
                {
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5202040401-1"));
                    swComp.SetSuppression2(2);                                 //2解压缩,0压缩.
                    swFeat = swAssy.FeatureByName("LocalLPattern4");
                    swFeat.SetSuppression2(1, 2, configNames);                 //参数1:1解压,0压缩
                    swModel.Parameter("D1@LocalLPattern4").SystemValue = fcNo; //D1阵列数量,D3阵列距离
                    swModel.Parameter("D1@Distance9").SystemValue      = (item.FCSideLeft + 500m * item.FCBlindNo) / 1000m;
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "KCJ FC FILTER-1"));
                    swComp.SetSuppression2(0);                 //2解压缩,0压缩.
                    swFeat = swAssy.FeatureByName("LocalLPattern2");
                    swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                }
                else
                {
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "KCJ FC FILTER-1"));
                    swComp.SetSuppression2(2);                                 //2解压缩,0压缩.
                    swFeat = swAssy.FeatureByName("LocalLPattern2");
                    swFeat.SetSuppression2(1, 2, configNames);                 //参数1:1解压,0压缩
                    swModel.Parameter("D1@LocalLPattern2").SystemValue = fcNo; //D1阵列数量,D3阵列距离
                    swModel.Parameter("D1@Distance10").SystemValue     = (item.FCSideLeft + 500m * item.FCBlindNo) / 1000m;
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "5202040401-1"));
                    swComp.SetSuppression2(0);                 //2解压缩,0压缩.
                    swFeat = swAssy.FeatureByName("LocalLPattern4");
                    swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                }
                //----------油网侧板----------
                switch (item.FCSide)
                {
                case "LEFT":
                    //重命名装配体内部
                    if (item.FCType == "KSA")
                    {
                        compReName = "FNCE0108[BP-" + tree.Module + "]{" + (int)(item.FCSideLeft + fcNo * 2.5m) + "}";
                    }
                    else
                    {
                        compReName = "FNCE0108[BP-" + tree.Module + "]{" + (int)(item.FCSideLeft - 4m) + "}";
                    }
                    status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
                    if (status)
                    {
                        swModelDocExt.RenameDocument(compReName);
                    }
                    swModel.ClearSelection2(true);
                    status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
                    swModel.ClearSelection2(true);
                    if (status)
                    {
                        swComp = swAssy.GetComponentByName(compReName + "-1");
                        swComp.SetSuppression2(2);      //2解压缩,0压缩.
                        swPart = swComp.GetModelDoc2(); //打开零件
                        if (item.FCType == "KSA")
                        {
                            swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft + fcNo * 2.5m) / 1000m;
                        }
                        else
                        {
                            swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - 4m) / 1000m;
                        }
                    }
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1"));
                    swComp.SetSuppression2(0);     //2解压缩,0压缩.
                    break;

                case "RIGHT":
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1"));
                    swComp.SetSuppression2(0);     //2解压缩,0压缩.
                    //重命名装配体内部
                    if (item.FCType == "KSA")
                    {
                        compReName = "FNCE0109[BP-" + tree.Module + "]{" + (int)(item.FCSideRight + fcNo * 2.5m) + "}";
                    }
                    else
                    {
                        compReName = "FNCE0109[BP-" + tree.Module + "]{" + (int)(item.FCSideRight - 4m) + "}";
                    }
                    status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
                    if (status)
                    {
                        swModelDocExt.RenameDocument(compReName);
                    }
                    swModel.ClearSelection2(true);
                    status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
                    swModel.ClearSelection2(true);
                    if (status)
                    {
                        swComp = swAssy.GetComponentByName(compReName + "-1");
                        swComp.SetSuppression2(2);      //2解压缩,0压缩.
                        swPart = swComp.GetModelDoc2(); //打开零件
                        if (item.FCType == "KSA")
                        {
                            swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight + fcNo * 2.5m) / 1000m;
                        }
                        else
                        {
                            swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - 4m) / 1000m;
                        }
                    }
                    break;

                case "BOTH":
                    //重命名装配体内部
                    if (item.FCType == "KSA")
                    {
                        compReName = "FNCE0108[BP-" + tree.Module + ".1]{" + (int)(item.FCSideLeft + fcNo * 1.25m) + "}";
                    }
                    else
                    {
                        compReName = "FNCE0108[BP-" + tree.Module + "]{" + (int)(item.FCSideLeft - 2m) + "}";
                    }
                    status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
                    if (status)
                    {
                        swModelDocExt.RenameDocument(compReName);
                    }
                    swModel.ClearSelection2(true);
                    status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
                    swModel.ClearSelection2(true);
                    if (status)
                    {
                        swComp = swAssy.GetComponentByName(compReName + "-1");
                        swComp.SetSuppression2(2);      //2解压缩,0压缩.
                        swPart = swComp.GetModelDoc2(); //打开零件
                        if (item.FCType == "KSA")
                        {
                            swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft + fcNo * 1.25m) / 1000m;
                        }
                        else
                        {
                            swPart.Parameter("D2@草图1").SystemValue = (item.FCSideLeft - 2m) / 1000m;
                        }
                    }
                    //重命名装配体内部
                    if (item.FCType == "KSA")
                    {
                        compReName = "FNCE0109[BP-" + tree.Module + ".2]{" + (int)(item.FCSideRight + fcNo * 1.25m) + "}";
                    }
                    else
                    {
                        compReName = "FNCE0109[BP-" + tree.Module + "]{" + (int)(item.FCSideRight - 2m) + "}";
                    }
                    status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
                    if (status)
                    {
                        swModelDocExt.RenameDocument(compReName);
                    }
                    swModel.ClearSelection2(true);
                    status = swModelDocExt.SelectByID2(compReName + "-1" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
                    swModel.ClearSelection2(true);
                    if (status)
                    {
                        swComp = swAssy.GetComponentByName(compReName + "-1");
                        swComp.SetSuppression2(2);      //2解压缩,0压缩.
                        swPart = swComp.GetModelDoc2(); //打开零件
                        if (item.FCType == "KSA")
                        {
                            swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight + fcNo * 1.25m) / 1000m;
                        }
                        else
                        {
                            swPart.Parameter("D2@草图1").SystemValue = (item.FCSideRight - 2m) / 1000m;
                        }
                    }
                    break;

                default:
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0108[BP-]{}-1"));
                    swComp.SetSuppression2(0);     //2解压缩,0压缩.
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0109[BP-]{}-1"));
                    swComp.SetSuppression2(0);     //2解压缩,0压缩.
                    break;
                }
                //----------日本项目需要压缩零件----------
                if (item.Japan == "YES")
                {
                    //吊装垫片
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9"));
                    swComp.SetSuppression2(0);                 //2解压缩,0压缩.
                    swFeat = swAssy.FeatureByName("LocalLPattern1");
                    swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                    //排风脖颈
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXSPIGOT-1"));
                    swComp.SetSuppression2(0); //2解压缩,0压缩.
                    //排风滑门
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXDOOR-1"));
                    swComp.SetSuppression2(0); //2解压缩,0压缩.
                    //排风腔
                    //重命名装配体内部
                    compReName = "FNCE0125[KCJSB265-" + tree.Module + "]{" + (int)item.Length + "}";
                    status     = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0125-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
                    if (status)
                    {
                        swModelDocExt.RenameDocument(compReName);
                    }
                    swModel.ClearSelection2(true);
                    status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
                    swModel.ClearSelection2(true);
                    if (status)
                    {
                        swComp = swAssy.GetComponentByName(compReName + "-2");
                        swPart = swComp.GetModelDoc2(); //打开零件
                        swPart.Parameter("D1@Aufsatz-Linear austragen1").SystemValue = item.Length / 1000m;
                        swFeat = swComp.FeatureByName("EX");
                        swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                        swFeat = swComp.FeatureByName("Cut-Extrude4");
                        swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                        swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
                        swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                        swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
                        swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                        swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
                        swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                        swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
                        swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                        if (item.MARVEL == "YES")
                        {
                            swFeat = swComp.FeatureByName("MA-NTC");
                            swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩
                            swFeat = swComp.FeatureByName("MA-TAB");
                            swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩
                        }
                        else
                        {
                            swFeat = swComp.FeatureByName("MA-NTC");
                            swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                            swFeat = swComp.FeatureByName("MA-TAB");
                            swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                        }
                    }
                }
                else
                {
                    //吊装垫片
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0070-9"));
                    swComp.SetSuppression2(2);                 //2解压缩,0压缩.
                    swFeat = swAssy.FeatureByName("LocalLPattern1");
                    swFeat.SetSuppression2(2, 2, configNames); //参数1:1解压,0压缩
                    //排风脖颈
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXSPIGOT-1"));
                    swComp.SetSuppression2(2);      //2解压缩,0压缩.
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0019-1"));
                    swPart = swComp.GetModelDoc2(); //打开零件
                    swPart.Parameter("D2@基体-法兰1").SystemValue = (item.ExLength + 50m) / 1000m;
                    swPart.Parameter("D3@草图1").SystemValue    = item.ExHeight / 1000m;
                    swFeat = swComp.FeatureByName("ANSUL");
                    if (item.ANSUL == "YES")
                    {
                        swFeat.SetSuppression2(1, 2, configNames);                      //参数1:1解压,0压缩
                    }
                    else
                    {
                        swFeat.SetSuppression2(0, 2, configNames);  //参数1:1解压,0压缩
                    }
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0020-1"));
                    swPart = swComp.GetModelDoc2();//打开零件
                    swPart.Parameter("D2@基体-法兰1").SystemValue = (item.ExLength + 50m) / 1000m;
                    swPart.Parameter("D3@草图1").SystemValue    = item.ExHeight / 1000m;
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0047-1"));
                    swPart = swComp.GetModelDoc2();//打开零件
                    swPart.Parameter("D2@基体-法兰1").SystemValue = item.ExWidth / 1000m;
                    swPart.Parameter("D3@草图1").SystemValue    = item.ExHeight / 1000m;
                    swFeat = swComp.FeatureByName("ANDTEC");
                    swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0048-2"));
                    swPart = swComp.GetModelDoc2();            //打开零件
                    swPart.Parameter("D2@基体-法兰1").SystemValue = item.ExWidth / 1000m;
                    swPart.Parameter("D3@草图1").SystemValue    = item.ExHeight / 1000m;
                    swFeat = swComp.FeatureByName("ANDTEC");
                    swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                    //排风滑门
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "EXDOOR-1"));
                    swComp.SetSuppression2(2);      //2解压缩,0压缩.
                    swPart = swComp.GetModelDoc2(); //打开零件
                    swPart.Parameter("D1@Distance3").SystemValue = (item.ExWidth + 20m) / 1000m;
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0018-1"));
                    swPart = swComp.GetModelDoc2();//打开零件
                    swPart.Parameter("D2@Base-Flange1").SystemValue = (item.ExLength * 2m + 100m) / 1000m;
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0013-1"));
                    swPart = swComp.GetModelDoc2();//打开零件
                    swPart.Parameter("D1@Sketch1").SystemValue = (item.ExLength / 2m + 10m) / 1000m;
                    swPart.Parameter("D2@Sketch1").SystemValue = (item.ExWidth + 40m) / 1000m;
                    //排风腔
                    //重命名装配体内部
                    compReName = "FNCE0125[KCJSB265-" + tree.Module + "]{" + (int)item.Length + "}";
                    status     = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCE0125-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
                    if (status)
                    {
                        swModelDocExt.RenameDocument(compReName);
                    }
                    swModel.ClearSelection2(true);
                    status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
                    swModel.ClearSelection2(true);
                    if (status)
                    {
                        swComp = swAssy.GetComponentByName(compReName + "-2");
                        swPart = swComp.GetModelDoc2(); //打开零件
                        swPart.Parameter("D1@Aufsatz-Linear austragen1").SystemValue = item.Length / 1000m;
                        swFeat = swComp.FeatureByName("EX");
                        swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩
                        swFeat = swComp.FeatureByName("Cut-Extrude4");
                        swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩
                        swPart.Parameter("D4@Sketch2").SystemValue = item.ExRightDis / 1000m;
                        swPart.Parameter("D1@Sketch2").SystemValue = item.ExLength / 1000m;
                        swPart.Parameter("D2@Sketch2").SystemValue = item.ExWidth / 1000m;
                        if (item.ANSUL == "YES")
                        {
                            //侧喷
                            if (item.ANSide == "LEFT")
                            {
                                swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
                                swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                                swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
                                swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩
                            }
                            else if (item.ANSide == "RIGHT")
                            {
                                swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
                                swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩
                                swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
                                swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                            }
                            else
                            {
                                swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
                                swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                                swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
                                swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                            }
                            //探测器
                            if (item.ANDetector == "LEFT")
                            {
                                swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
                                swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                                swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
                                swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩
                            }
                            else if (item.ANDetector == "RIGHT")
                            {
                                swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
                                swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩
                                swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
                                swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                            }
                            else if (item.ANDetector == "BOTH")
                            {
                                swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
                                swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩
                                swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
                                swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩
                            }
                            else
                            {
                                swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
                                swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                                swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
                                swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                            }
                        }
                        else
                        {
                            swFeat = swComp.FeatureByName("ANSULSIDE RIGHT");
                            swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                            swFeat = swComp.FeatureByName("ANSULSIDE LEFT");
                            swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                            swFeat = swComp.FeatureByName("ANDTECSIDE RIGHT");
                            swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                            swFeat = swComp.FeatureByName("ANDTECSIDE LEFT");
                            swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                        }

                        if (item.MARVEL == "YES")
                        {
                            swFeat = swComp.FeatureByName("MA-NTC");
                            swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩
                            swFeat = swComp.FeatureByName("MA-TAB");
                            swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩
                        }
                        else
                        {
                            swFeat = swComp.FeatureByName("MA-NTC");
                            swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                            swFeat = swComp.FeatureByName("MA-TAB");
                            swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩
                        }
                    }
                }
                //----------SSP灯板支撑条----------
                if (item.SSPType == "DOME")
                {
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-1"));
                    swComp.SetSuppression2(0);      //2解压缩,0压缩.
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-1"));
                    swComp.SetSuppression2(2);      //2解压缩,0压缩.
                    swPart = swComp.GetModelDoc2(); //打开零件
                    swPart.Parameter("D2@Sketch1").SystemValue = item.Length / 1000m;
                    if (item.Gutter == "YES")
                    {
                        swModel.Parameter("D1@Distance12").SystemValue = item.GutterWidth / 1000m;
                    }
                    else
                    {
                        swModel.Parameter("D1@Distance12").SystemValue = 0.5m / 1000m;
                    }
                }
                else
                {
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0036-1"));
                    swComp.SetSuppression2(2);      //2解压缩,0压缩.
                    swPart = swComp.GetModelDoc2(); //打开零件
                    swPart.Parameter("D2@Sketch1").SystemValue = item.Length / 1000m;
                    if (item.Gutter == "YES")
                    {
                        swModel.Parameter("D1@Distance2").SystemValue = item.GutterWidth / 1000m;
                    }
                    else
                    {
                        swModel.Parameter("D1@Distance2").SystemValue = 0.5m / 1000m;
                    }
                    swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCE0035-1"));
                    swComp.SetSuppression2(0); //2解压缩,0压缩.
                }

                swModel.ForceRebuild3(true);    //设置成true,直接更新顶层,速度很快,设置成false,每个零件都会更新,很慢
                swModel.Save();                 //保存,很耗时间
                swApp.CloseDoc(packedAssyPath); //关闭,很快
            }
            catch (Exception ex)
            {
                throw new Exception(packedAssyPath + "作图过程发生异常,详细:" + ex.Message);
            }
            finally
            {
                swApp.CommandInProgress = false; //及时关闭外部命令调用,否则影响SolidWorks的使用
            }
        }
コード例 #5
0
ファイル: FrmKCJSB265.cs プロジェクト: JustinSunli/Compass
        private void btnEditData_Click(object sender, EventArgs e)
        {
            #region 数据验证
            //必填项目
            if (pbModelImage.Tag.ToString().Length == 0)
            {
                return;
            }
            if (!DataValidate.IsDecimal(txtLength.Text.Trim()) || Convert.ToDecimal(txtLength.Text.Trim()) < 100m)
            {
                MessageBox.Show("请认真检查烟罩长度", "提示信息");
                txtLength.Focus();
                txtLength.SelectAll();
                return;
            }
            //ANSUL腔
            if (cobGutter.SelectedIndex == -1)
            {
                MessageBox.Show("请选择是否右ANSUL腔", "提示信息");
                cobGutter.Focus();
                return;
            }
            else if (cobGutter.SelectedIndex == 0 && (!DataValidate.IsDecimal(txtGutterWidth.Text.Trim()) || Convert.ToDecimal(txtGutterWidth.Text.Trim()) < 30m))
            {
                MessageBox.Show("请认真检查ANSUL腔宽度", "提示信息");//当脖颈大于2时需要填写脖颈间距
                txtGutterWidth.Focus();
                txtGutterWidth.SelectAll();
                return;
            }

            //脖颈
            if (!DataValidate.IsDecimal(txtExLength.Text.Trim()) || Convert.ToDecimal(txtExLength.Text.Trim()) < 50m)
            {
                MessageBox.Show("请填写脖颈长度", "提示信息");
                txtExLength.Focus();
                txtExLength.SelectAll();
                return;
            }
            if (!DataValidate.IsDecimal(txtExWidth.Text.Trim()) || Convert.ToDecimal(txtExWidth.Text.Trim()) < 50m)
            {
                MessageBox.Show("请填写脖颈宽度", "提示信息");
                txtExWidth.Focus();
                txtExWidth.SelectAll();
                return;
            }
            if (!DataValidate.IsDecimal(txtExHeight.Text.Trim()) || Convert.ToDecimal(txtExHeight.Text.Trim()) < 20m)
            {
                MessageBox.Show("请填写脖颈高度", "提示信息");
                txtExHeight.Focus();
                txtExHeight.SelectAll();
                return;
            }
            //ANSUL
            if (cobANSUL.SelectedIndex == -1)
            {
                MessageBox.Show("是否带ANSUL", "提示信息");
                cobANSUL.Focus();
                return;
            }

            if (cobMARVEL.SelectedIndex == -1)
            {
                MessageBox.Show("是否带MARVEL", "提示信息");
                cobMARVEL.Focus();
                return;
            }
            if (cobANSUL.SelectedIndex == 0)
            {
                if (cobANSide.SelectedIndex == -1)
                {
                    MessageBox.Show("请选择ANSUL侧喷位置", "提示信息");
                    cobANSide.Focus();
                    return;
                }
                if (cobANDetector.SelectedIndex == -1)
                {
                    MessageBox.Show("请选择ANSUL探测器进出口位置", "提示信息");
                    cobANDetector.Focus();
                    return;
                }
            }
            //其他配置
            if (cobSSPType.SelectedIndex == -1)
            {
                MessageBox.Show("请选择SSP灯板类型", "提示信息");
                cobSSPType.Focus();
                return;
            }
            if (cobJapan.SelectedIndex == -1)
            {
                MessageBox.Show("请选择是否为日本项目", "提示信息");
                cobJapan.Focus();
                return;
            }
            //油网侧板
            if (cobFCType.SelectedIndex == -1)
            {
                MessageBox.Show("请选择油网类型", "提示信息");
                cobFCType.Focus();
                return;
            }
            if (cobFCSide.SelectedIndex == -1)
            {
                MessageBox.Show("请选择油网侧板", "提示信息");
                cobFCSide.Focus();
                return;
            }
            if ((cobFCSide.SelectedIndex == 0 || cobFCSide.SelectedIndex == 2) && (!DataValidate.IsDecimal(txtFCSideLeft.Text.Trim()) || Convert.ToDecimal(txtFCSideLeft.Text.Trim()) < 10m))
            {
                MessageBox.Show("请认真检查左油网侧板长度", "提示信息");//当脖颈大于2时需要填写脖颈间距
                txtFCSideLeft.Focus();
                txtFCSideLeft.SelectAll();
                return;
            }
            if ((cobFCSide.SelectedIndex == 1 || cobFCSide.SelectedIndex == 2) && (!DataValidate.IsDecimal(txtFCSideRight.Text.Trim()) || Convert.ToDecimal(txtFCSideRight.Text.Trim()) < 10m))
            {
                MessageBox.Show("请认真检查右油网侧板长度", "提示信息");//当脖颈大于2时需要填写脖颈间距
                txtFCSideRight.Focus();
                txtFCSideRight.SelectAll();
                return;
            }
            #endregion
            //封装对象
            KCJSB265 objKCJSB265 = new KCJSB265()
            {
                KCJSB265Id = Convert.ToInt32(pbModelImage.Tag),
                ANSUL      = cobANSUL.Text,
                ANSide     = cobANSide.Text.Trim().Length == 0 ? "NO" : cobANSide.Text,
                ANDetector = cobANDetector.Text.Trim().Length == 0 ? "NO" : cobANDetector.Text,
                MARVEL     = cobMARVEL.Text,
                SSPType    = cobSSPType.Text,
                Japan      = cobJapan.Text,
                Gutter     = cobGutter.Text,
                FCSide     = cobFCSide.Text,
                FCType     = cobFCType.Text,
                FCBlindNo  = Convert.ToInt32(cobFCBlindNo.Text.Trim()),

                Length      = Convert.ToDecimal(txtLength.Text.Trim()),
                ExRightDis  = Convert.ToDecimal(txtExRightDis.Text.Trim()),
                ExLength    = Convert.ToDecimal(txtExLength.Text.Trim()),
                ExWidth     = Convert.ToDecimal(txtExWidth.Text.Trim()),
                ExHeight    = Convert.ToDecimal(txtExHeight.Text.Trim()),
                GutterWidth = Convert.ToDecimal(txtGutterWidth.Text.Trim()),
                FCSideLeft  = Convert.ToDecimal(txtFCSideLeft.Text.Trim()),
                FCSideRight = Convert.ToDecimal(txtFCSideRight.Text.Trim())
            };
            //提交修改
            try
            {
                if (objKCJSB265Service.EditModel(objKCJSB265) == 1)
                {
                    MessageBox.Show("制图数据修改成功", "提示信息");
                    this.DialogResult = DialogResult.OK;
                    this.Close();
                }
            }
            catch (Exception ex)
            {
                MessageBox.Show(ex.Message);
            }
        }