/// <summary>
/// 将源寄存器值赋值到目标寄存器，源寄存器由b指定，目标寄存器为a，c无效
/// </summary>
/// <param name="i"></param>
public void Move(Instruction i)
{
int a = 0, b = 0, c = 0;
i.ABC(ref a, ref b, ref c);
luaState.CopyTo(b + 1, a + 1);
}
/// <summary>
/// setupval指令，将寄存器的值赋值给upval，a指定寄存器索引，b指定upval索引，c没用
/// </summary>
/// <param name="i"></param>
public void SetUpval(Instruction i)
{
int a = 0, b = 0, c = 0;
i.ABC(ref a, ref b, ref c);
luaState.SetUpval(b, luaState.Get(a + 1));
}
private static void printOperands(Instruction i)
{
int a, b, c, ax, bx, sbx;
switch (i.OpMode())
{
case OpCodes.IABC:
var abc = i.ABC();
Console.Write($"{abc.Item1:D}", abc.Item1);
if (i.BMode() != OpCodes.OpArgN)
{
if (abc.Item2 > 0xFF)
{
Console.Write($" {-1 - (abc.Item2 & 0xFF):D}");
}
else
{
Console.Write($" {abc.Item2:D}");
}
}
if (i.CMode() != OpCodes.OpArgN)
{
if (abc.Item3 > 0xFF)
{
Console.Write($"{-1 - (abc.Item3 & 0xFF):D}");
}
else
{
Console.Write($" {abc.Item3:D}");
}
}
break;
case OpCodes.IABx:
var aBx = i.ABx();
Console.Write($" {aBx.Item1:D}");
if (i.BMode() == OpCodes.OpArgK)
{
Console.Write($"{-1 - aBx.Item2:D}");
}
else if (i.BMode() == OpCodes.OpArgU)
{
Console.Write($" {aBx.Item2:D}");
}
break;
case OpCodes.IAsBx:
var asBx = i.AsBx();
Console.Write($"{asBx.Item1:D} {asBx.Item2:D}");
break;
case OpCodes.IAx:
ax = i.Ax();
Console.Write($"{-1 - ax:D}");
break;
}
}
/// <summary>
/// not指令，求某个变量是否为nil，a指定结果寄存器索引，b指定变量寄存器索引
/// </summary>
/// <param name="i"></param>
public void Not(Instruction i)
{
int a = 0, b = 0, c = 0;
i.ABC(ref a, ref b, ref c);
luaState.Push(new LuaValue(luaState.IsBool(b + 1), LuaValueType.Bool));
luaState.Replace(a + 1);
}
internal static void GetUpval(Instruction i, ILuaVM vm)
{
var(a, b, _) = i.ABC();
a += 1;
b += 1;
vm.Copy(LuaState.LuaUpvalueIndex(b), a);
}
/// <summary>
/// 求长度指令，b代表变量寄存器索引，a代表结果目标索引
/// </summary>
/// <param name="i"></param>
public void Len(Instruction i)
{
int a = 0, b = 0, c = 0;
i.ABC(ref a, ref b, ref c);
luaState.Len(b + 1);
luaState.Replace(a + 1);
}
internal static void NewTable(Instruction i, ILuaVM vm)
{
var(a, b, c) = i.ABC();
a += 1;
vm.CreateTable(Fb2int(b), Fb2int(c));
vm.Replace(a);
}
internal static void Len(Instruction i, ILuaVM vm)
{
var(a, b, _) = i.ABC();
a += 1;
b += 1;
vm.Len(b);
vm.Replace(a);
}
internal static void Not(Instruction i, ILuaVM vm)
{
var(a, b, _) = i.ABC();
a += 1;
b += 1;
vm.PushBoolean(!vm.ToBoolean(b));
vm.Replace(a);
}
internal static void SetTabUp(Instruction i, ILuaVM vm)
{
var(a, b, c) = i.ABC();
a += 1;
vm.GetRK(b);
vm.GetRK(c);
vm.SetTable(LuaState.LuaUpvalueIndex(a));
}
internal static void TForCall(Instruction i, ILuaVM vm)
{
var(a, _, c) = i.ABC();
a += 1;
PushFuncAndArgs(a, 3, vm);
vm.Call(2, c);
PopResults(a + 3, c + 1, vm);
}
public static void SetTable(Instruction i, ILuaVM vm)
{
var(a, b, c) = i.ABC();
a += 1;
vm.GetRK(b);
vm.GetRK(c);
vm.SetTable(a);
}
/// <summary>
/// NEWTABLE指令（iABC模式）创建空表，并将其放入指定寄存器。寄存器索引由操作数A指定，表的初始数组容量和哈希表容量分别由操作数B和C指定。
/// </summary>
/// <param name="i"></param>
public void NewTable(Instruction i)
{
int a = 0, b = 0, c = 0;
i.ABC(ref a, ref b, ref c);
a += 1;
luaState.CreatLuaTable(b, c);
luaState.Replace(a);
}
internal static void Test(Instruction i, ILuaVM vm)
{
var(a, _, c) = i.ABC();
a += 1;
if (vm.ToBoolean(a) != (c != 0))
{
vm.AddPC(1);
}
}
internal static void Call(Instruction i, ILuaVM vm)
{
var(a, b, c) = i.ABC();
a += 1;
int nArgs = PushFuncAndArgs(a, b, vm);
vm.Call(nArgs, c - 1);
PopResults(a, c, vm);
}
private static void UnaryArith(Instruction i, ILuaVM vm, ArithOp op)
{
var(a, b, _) = i.ABC();
a += 1;
b += 1;
vm.PushValue(b);
vm.Arith(op);
vm.Replace(a);
}
private static void BinaryArith(Instruction i, ILuaVM vm, ArithOp op)
{
var(a, b, c) = i.ABC();
a += 1;
vm.GetRK(b);
vm.GetRK(c);
vm.Arith(op);
vm.Replace(a);
}
internal static void LoadBool(Instruction i, ILuaVM vm)
{
var(a, b, c) = i.ABC();
a += 1;
vm.PushBoolean(b != 0);
vm.Replace(a);
if (c != 0)
{
vm.AddPC(1);
}
}
internal static void Vararg(Instruction i, ILuaVM vm)
{
var(a, b, _) = i.ABC();
a += 1;
if (b != 1)
{
vm.LoadVararg(b - 1);
PopResults(a, b, vm);
}
}
internal static void Self(Instruction i, ILuaVM vm)
{
var(a, b, c) = i.ABC();
a += 1;
b += 1;
vm.Copy(b, a + 1);
vm.GetRK(c);
vm.GetTable(b);
vm.Replace(a);
}
/// <summary>
/// 连续为寄存器置n个nil值，寄存器起始索引为a，数量为b,c无效
/// </summary>
/// <param name="i"></param>
public void LoadNil(Instruction i)
{
int a = 0, b = 0, c = 0;
i.ABC(ref a, ref b, ref c);
luaState.Push(new LuaValue());
for (int j = a + 1; j <= a + b; j++)
{
luaState.CopyTo(-1, j);
}
luaState.Pop(1);
}
private static void Compare(Instruction i, ILuaVM vm, CompareOp op)
{
var(a, b, c) = i.ABC();
vm.GetRK(b);
vm.GetRK(c);
if (vm.Compare(-2, -1, op) != (a != 0))
{
vm.AddPC(1);
}
vm.Pop(2);
}
/// <summary>
/// SETTABLE指令（iABC模式）根据键往表里赋值。其中表位于寄存器中，索引由操作数A指定；键和值可能位于寄存器中，也可能在常量表里，索引分别由操作数B和C指定。
/// </summary>
/// <param name="i"></param>
public void SetTable(Instruction i)
{
int a = 0, b = 0, c = 0;
i.ABC(ref a, ref b, ref c);
luaState.GetRK(b);
luaState.GetRK(c);
var value = luaState.Pop();
var key = luaState.Pop();
luaState.SetTable(a + 1, key, value);
}
internal static void LoadNil(Instruction i, ILuaVM vm)
{
var(a, b, _) = i.ABC();
a += 1;
vm.PushNil();
for (int j = a; j <= a + b; j++)
{
vm.Copy(-1, j);
}
vm.Pop(1);
}
/// <summary>
/// gettableup指令，当某个upval是一个表，则通过该指令从该表中获取值，目标寄存器由a指定，upval索引由b指定，键由c指定，可能是常量也可能在寄存器中
/// </summary>
/// <param name="i"></param>
public void GetUpTable(Instruction i)
{
int a = 0, b = 0, c = 0;
i.ABC(ref a, ref b, ref c);
luaState.GetRK(c);
var table = luaState.GetUpval(b);
var key = luaState.Pop();
luaState.Push((table.OValue as LuaTable)[key]);
luaState.Replace(a + 1);
}
/// <summary>
/// 尾调用指令，使用当前函数帧继续调用函数
/// </summary>
/// <param name="i"></param>
public void TailCall(Instruction i)
{
int a = 0, b = 0, c = 0;
i.ABC(ref a, ref b, ref c);
a += 1;
c = 0;
int nArg = PushArgAndFunc(a, b);
luaState.Call(nArg, c - 1);
PopResults(a, c);
}
/// <summary>
/// Self指令，把对象和函数对象拷贝到两个相邻的寄存器中。对象在寄存器中，由操作数B指定，方法名在常量表中，操作数C指定，目标寄存器由操作数A指定。这样比两次Move少一个指令
/// </summary>
/// <param name="i"></param>
public void Self(Instruction i)
{
int a = 0, b = 0, c = 0;
i.ABC(ref a, ref b, ref c);
a += 1;
b += 1;
luaState.CopyTo(b, a + 1);
luaState.GetRK(c);
luaState.GetTable(luaState.GetTopValue(), b);
luaState.Replace(a);
}
/// <summary>
/// GETTABLE指令（iABC模式）根据键从表里取值，并放入目标寄存器中。
/// 其中表位于寄存器中，索引由操作数B指定；键可能位于寄存器中，也可能在常量表里，索引由操作数C指定；目标寄存器索引则由操作数A指定。
/// </summary>
/// <param name="i"></param>
public void GetTable(Instruction i)
{
int a = 0, b = 0, c = 0;
i.ABC(ref a, ref b, ref c);
a += 1;
b += 1;
luaState.GetRK(c);
var key = luaState.Pop();
luaState.GetTable(key, b);
luaState.Replace(a);
}
/// <summary>
/// 变长参数指令。把传递给当前函数的连续多个参数加载到连续的指定寄存器中。A操作数指定第一个寄存器。B操作数指定数量。C操作数没用
/// b == 1,表示没有，b > 1，表示 b-1个参数,b = 0表示把从栈顶到a的所有寄存器全部加载
/// </summary>
/// <param name="i"></param>
public void Vararg(Instruction i)
{
int a = 0, b = 0, c = 0;
i.ABC(ref a, ref b, ref c);
a += 1;
//b > 1和b>0统一处理
if (b != 1)
{
luaState.LoadVararg(b - 1);
PopResults(a, b);
}
}
/// <summary>
/// 设置给定寄存器值为bool, a 为寄存器索引，b为bool值，c非0则跳过下一条指令
/// </summary>
/// <param name="i"></param>
public void LoadBool(Instruction i)
{
int a = 0, b = 0, c = 0;
i.ABC(ref a, ref b, ref c);
a += 1;
luaState.Push(new LuaValue(b != 0, LuaValueType.Bool));
luaState.Replace(a, luaState.GetTopValue());
if (c != 0)
{
luaState.AddPC();
}
}
