/// <summary>
/// Grab <see cref="InputSystem.settings"/> and set it up for editing.
/// </summary>
private void InitializeWithCurrentSettings()
{
// Find the set of available assets in the project.
m_AvailableInputSettingsAssets = FindInputSettingsInProject();
// See which is the active one.
m_Settings = InputSystem.settings;
m_SettingsDirtyCount = EditorUtility.GetDirtyCount(m_Settings);
var currentSettingsPath = AssetDatabase.GetAssetPath(m_Settings);
if (string.IsNullOrEmpty(currentSettingsPath))
{
if (m_AvailableInputSettingsAssets.Length != 0)
{
m_CurrentSelectedInputSettingsAsset = 0;
m_Settings = AssetDatabase.LoadAssetAtPath <InputSettings>(m_AvailableInputSettingsAssets[0]);
InputSystem.settings = m_Settings;
}
}
else
{
m_CurrentSelectedInputSettingsAsset = ArrayHelpers.IndexOf(m_AvailableInputSettingsAssets, currentSettingsPath);
if (m_CurrentSelectedInputSettingsAsset == -1)
{
// This is odd and shouldn't happen. Solve by just adding the path to the list.
m_CurrentSelectedInputSettingsAsset =
ArrayHelpers.Append(ref m_AvailableInputSettingsAssets, currentSettingsPath);
}
////REVIEW: should we store this by platform?
EditorBuildSettings.AddConfigObject(kEditorBuildSettingsConfigKey, m_Settings, true);
}
// Refresh the list of assets we display in the UI.
m_AvailableSettingsAssetsOptions = new GUIContent[m_AvailableInputSettingsAssets.Length];
for (var i = 0; i < m_AvailableInputSettingsAssets.Length; ++i)
{
var name = m_AvailableInputSettingsAssets[i];
if (name.StartsWith("Assets/"))
{
name = name.Substring("Assets/".Length);
}
if (name.EndsWith(".asset"))
{
name = name.Substring(0, name.Length - ".asset".Length);
}
if (name.EndsWith(".inputsettings"))
{
name = name.Substring(0, name.Length - ".inputsettings".Length);
}
// Ugly hack: GenericMenu interprets "/" as a submenu path. But luckily, "/" is not the only slash we have in Unicode.
m_AvailableSettingsAssetsOptions[i] = new GUIContent(name.Replace("/", "\u29f8"));
}
// Look up properties.
m_SettingsObject = new SerializedObject(m_Settings);
m_UpdateMode = m_SettingsObject.FindProperty("m_UpdateMode");
m_CompensateForScreenOrientation = m_SettingsObject.FindProperty("m_CompensateForScreenOrientation");
m_FilterNoiseOnCurrent = m_SettingsObject.FindProperty("m_FilterNoiseOnCurrent");
m_DefaultDeadzoneMin = m_SettingsObject.FindProperty("m_DefaultDeadzoneMin");
m_DefaultDeadzoneMax = m_SettingsObject.FindProperty("m_DefaultDeadzoneMax");
m_DefaultButtonPressPoint = m_SettingsObject.FindProperty("m_DefaultButtonPressPoint");
m_ButtonReleaseThreshold = m_SettingsObject.FindProperty("m_ButtonReleaseThreshold");
m_DefaultTapTime = m_SettingsObject.FindProperty("m_DefaultTapTime");
m_DefaultSlowTapTime = m_SettingsObject.FindProperty("m_DefaultSlowTapTime");
m_DefaultHoldTime = m_SettingsObject.FindProperty("m_DefaultHoldTime");
m_TapRadius = m_SettingsObject.FindProperty("m_TapRadius");
m_MultiTapDelayTime = m_SettingsObject.FindProperty("m_MultiTapDelayTime");
m_UpdateModeContent = new GUIContent("Update Mode", "When should the Input System be updated?");
m_FilterNoiseOnCurrentContent = new GUIContent("Filter Noise on current", "If enabled, input from noisy controls will not cause a device to become '.current'.");
m_CompensateForScreenOrientationContent = new GUIContent("Compensate Orientation", "Whether sensor input on mobile devices should be transformed to be relative to the current device orientation.");
m_DefaultDeadzoneMinContent = new GUIContent("Default Deadzone Min", "Default 'min' value for Stick Deadzone and Axis Deadzone processors.");
m_DefaultDeadzoneMaxContent = new GUIContent("Default Deadzone Max", "Default 'max' value for Stick Deadzone and Axis Deadzone processors.");
m_DefaultButtonPressPointContent = new GUIContent("Default Button Press Point", "The default press point used for Button controls as well as for various interactions. For button controls which have analog physical inputs, this configures how far they need to be held down to be considered 'pressed'.");
m_ButtonReleaseThresholdContent = new GUIContent("Button Release Threshold", "Percent of press point at which a Button is considered released again. At 1, release points are identical to press points. At 0, a Button must be fully released before it can be pressed again.");
m_DefaultTapTimeContent = new GUIContent("Default Tap Time", "Default duration to be used for Tap and MultiTap interactions. Also used by by Touch screen devices to distinguish taps from to new touches.");
m_DefaultSlowTapTimeContent = new GUIContent("Default Slow Tap Time", "Default duration to be used for SlowTap interactions.");
m_DefaultHoldTimeContent = new GUIContent("Default Hold Time", "Default duration to be used for Hold interactions.");
m_TapRadiusContent = new GUIContent("Tap Radius", "Maximum distance between two finger taps on a touch screen device allowed for the system to consider this a tap of the same touch (as opposed to a new touch).");
m_MultiTapDelayTimeContent = new GUIContent("MultiTap Delay Time", "Default delay to be allowed between taps for MultiTap interactions. Also used by by touch devices to count multi taps.");
// Initialize ReorderableList for list of supported devices.
var supportedDevicesProperty = m_SettingsObject.FindProperty("m_SupportedDevices");
m_SupportedDevices = new ReorderableList(m_SettingsObject, supportedDevicesProperty)
{
drawHeaderCallback =
rect => { EditorGUI.LabelField(rect, m_SupportedDevicesText); },
onChangedCallback =
list => { Apply(); },
onAddDropdownCallback =
(rect, list) =>
{
var dropdown = new InputControlPickerDropdown(
new InputControlPickerState(),
path =>
{
////REVIEW: Why are we converting from a layout into a plain string here instead of just using path strings in supportedDevices?
//// Why not just have InputSettings.supportedDevices be a list of paths?
var layoutName = InputControlPath.TryGetDeviceLayout(path) ?? path;
var existingIndex = m_Settings.supportedDevices.IndexOf(x => x == layoutName);
if (existingIndex != -1)
{
m_SupportedDevices.index = existingIndex;
return;
}
var numDevices = supportedDevicesProperty.arraySize;
supportedDevicesProperty.InsertArrayElementAtIndex(numDevices);
supportedDevicesProperty.GetArrayElementAtIndex(numDevices)
.stringValue = layoutName;
m_SupportedDevices.index = numDevices;
Apply();
},
mode: InputControlPicker.Mode.PickDevice);
dropdown.Show(rect);
},
drawElementCallback =
(rect, index, isActive, isFocused) =>
{
var layoutName = m_Settings.supportedDevices[index];
var icon = EditorInputControlLayoutCache.GetIconForLayout(layoutName);
if (icon != null)
{
var iconRect = rect;
iconRect.width = 20;
rect.x += 20;
rect.width -= 20;
GUI.Label(iconRect, icon);
}
EditorGUI.LabelField(rect, layoutName);
}
};
m_iOSProvider = new InputSettingsiOSProvider(m_SettingsObject);
}
/// <summary>
/// Grab <see cref="InputSystem.settings"/> and set it up for editing.
/// </summary>
private void InitializeWithCurrentSettings()
{
// Find the set of available assets in the project.
m_AvailableInputSettingsAssets = FindInputSettingsInProject();
// See which is the active one.
m_Settings = InputSystem.settings;
m_SettingsDirtyCount = EditorUtility.GetDirtyCount(m_Settings);
var currentSettingsPath = AssetDatabase.GetAssetPath(m_Settings);
if (string.IsNullOrEmpty(currentSettingsPath))
{
if (m_AvailableInputSettingsAssets.Length != 0)
{
m_CurrentSelectedInputSettingsAsset = 0;
m_Settings = AssetDatabase.LoadAssetAtPath <InputSettings>(m_AvailableInputSettingsAssets[0]);
InputSystem.settings = m_Settings;
}
}
else
{
m_CurrentSelectedInputSettingsAsset = ArrayHelpers.IndexOf(m_AvailableInputSettingsAssets, currentSettingsPath);
if (m_CurrentSelectedInputSettingsAsset == -1)
{
// This is odd and shouldn't happen. Solve by just adding the path to the list.
m_CurrentSelectedInputSettingsAsset =
ArrayHelpers.Append(ref m_AvailableInputSettingsAssets, currentSettingsPath);
}
////REVIEW: should we store this by platform?
EditorBuildSettings.AddConfigObject(kEditorBuildSettingsConfigKey, m_Settings, true);
}
// Refresh the list of assets we display in the UI.
m_AvailableSettingsAssetsOptions = new GUIContent[m_AvailableInputSettingsAssets.Length];
for (var i = 0; i < m_AvailableInputSettingsAssets.Length; ++i)
{
var name = m_AvailableInputSettingsAssets[i];
if (name.StartsWith("Assets/"))
{
name = name.Substring("Assets/".Length);
}
if (name.EndsWith(".asset"))
{
name = name.Substring(0, name.Length - ".asset".Length);
}
if (name.EndsWith(".inputsettings"))
{
name = name.Substring(0, name.Length - ".inputsettings".Length);
}
// Ugly hack: GenericMenu interprets "/" as a submenu path. But luckily, "/" is not the only slash we have in Unicode.
m_AvailableSettingsAssetsOptions[i] = new GUIContent(name.Replace("/", "\u29f8"));
}
// Look up properties.
m_SettingsObject = new SerializedObject(m_Settings);
m_UpdateMode = m_SettingsObject.FindProperty("m_UpdateMode");
m_CompensateForScreenOrientation = m_SettingsObject.FindProperty("m_CompensateForScreenOrientation");
m_BackgroundBehavior = m_SettingsObject.FindProperty("m_BackgroundBehavior");
m_EditorInputBehaviorInPlayMode = m_SettingsObject.FindProperty("m_EditorInputBehaviorInPlayMode");
m_DefaultDeadzoneMin = m_SettingsObject.FindProperty("m_DefaultDeadzoneMin");
m_DefaultDeadzoneMax = m_SettingsObject.FindProperty("m_DefaultDeadzoneMax");
m_DefaultButtonPressPoint = m_SettingsObject.FindProperty("m_DefaultButtonPressPoint");
m_ButtonReleaseThreshold = m_SettingsObject.FindProperty("m_ButtonReleaseThreshold");
m_DefaultTapTime = m_SettingsObject.FindProperty("m_DefaultTapTime");
m_DefaultSlowTapTime = m_SettingsObject.FindProperty("m_DefaultSlowTapTime");
m_DefaultHoldTime = m_SettingsObject.FindProperty("m_DefaultHoldTime");
m_TapRadius = m_SettingsObject.FindProperty("m_TapRadius");
m_MultiTapDelayTime = m_SettingsObject.FindProperty("m_MultiTapDelayTime");
m_UpdateModeContent = new GUIContent("Update Mode", "When should the Input System be updated?");
m_CompensateForScreenOrientationContent = new GUIContent("Compensate Orientation", "Whether sensor input on mobile devices should be transformed to be relative to the current device orientation.");
m_BackgroundBehaviorContent = new GUIContent("Background Behavior", "If runInBackground is true (and in standalone *development* players and the editor), "
+ "determines what happens to InputDevices and events when the application moves in and out of running in the foreground.\n\n"
+ "'Reset And Disable Non-Background Devices' soft-resets and disables devices that cannot run in the background while the application does not have focus. Devices "
+ "that can run in the background remain enabled and will keep receiving input.\n"
+ "'Reset And Disable All Devices' soft-resets and disables *all* devices while the application does not have focus. No device will receive input while the application "
+ "is running in the background.\n"
+ "'Ignore Focus' leaves all devices untouched when application focus changes. While running in the background, all input that is received is processed as if "
+ "running in the foreground.");
m_EditorInputBehaviorInPlayModeContent = new GUIContent("Play Mode Input Behavior", "When in play mode, determines how focus of the Game View is handled with respect to input.\n\n"
+ "'Pointers And Keyboards Respect Game View Focus' requires Game View focus only for pointers (mice, touch, etc.) and keyboards. Other devices will feed input to the game regardless "
+ "of whether the Game View is focused or not. Note that this means that input on these devices is not visible in other EditorWindows.\n"
+ "'All Devices Respect Game View Focus' requires Game View focus for all input devices. While focus is not on the Game View, all input on InputDevices will go to the editor and not "
+ "the game.\n"
+ "'All Device Input Always Goes To Game View' causes input to treat 'Background Behavior' exactly as in the player including devices potentially being disabled entirely while the Game View "
+ "does not have focus. In this setting, no input from the Input System will be visible to EditorWindows.");
m_DefaultDeadzoneMinContent = new GUIContent("Default Deadzone Min", "Default 'min' value for Stick Deadzone and Axis Deadzone processors.");
m_DefaultDeadzoneMaxContent = new GUIContent("Default Deadzone Max", "Default 'max' value for Stick Deadzone and Axis Deadzone processors.");
m_DefaultButtonPressPointContent = new GUIContent("Default Button Press Point", "The default press point used for Button controls as well as for various interactions. For button controls which have analog physical inputs, this configures how far they need to be held down to be considered 'pressed'.");
m_ButtonReleaseThresholdContent = new GUIContent("Button Release Threshold", "Percent of press point at which a Button is considered released again. At 1, release points are identical to press points. At 0, a Button must be fully released before it can be pressed again.");
m_DefaultTapTimeContent = new GUIContent("Default Tap Time", "Default duration to be used for Tap and MultiTap interactions. Also used by by Touch screen devices to distinguish taps from to new touches.");
m_DefaultSlowTapTimeContent = new GUIContent("Default Slow Tap Time", "Default duration to be used for SlowTap interactions.");
m_DefaultHoldTimeContent = new GUIContent("Default Hold Time", "Default duration to be used for Hold interactions.");
m_TapRadiusContent = new GUIContent("Tap Radius", "Maximum distance between two finger taps on a touch screen device allowed for the system to consider this a tap of the same touch (as opposed to a new touch).");
m_MultiTapDelayTimeContent = new GUIContent("MultiTap Delay Time", "Default delay to be allowed between taps for MultiTap interactions. Also used by by touch devices to count multi taps.");
// Initialize ReorderableList for list of supported devices.
var supportedDevicesProperty = m_SettingsObject.FindProperty("m_SupportedDevices");
m_SupportedDevices = new ReorderableList(m_SettingsObject, supportedDevicesProperty)
{
drawHeaderCallback =
rect => { EditorGUI.LabelField(rect, m_SupportedDevicesText); },
onChangedCallback =
list => { Apply(); },
onAddDropdownCallback =
(rect, list) =>
{
var dropdown = new InputControlPickerDropdown(
new InputControlPickerState(),
path =>
{
////REVIEW: Why are we converting from a layout into a plain string here instead of just using path strings in supportedDevices?
//// Why not just have InputSettings.supportedDevices be a list of paths?
var layoutName = InputControlPath.TryGetDeviceLayout(path) ?? path;
var existingIndex = m_Settings.supportedDevices.IndexOf(x => x == layoutName);
if (existingIndex != -1)
{
m_SupportedDevices.index = existingIndex;
return;
}
var numDevices = supportedDevicesProperty.arraySize;
supportedDevicesProperty.InsertArrayElementAtIndex(numDevices);
supportedDevicesProperty.GetArrayElementAtIndex(numDevices)
.stringValue = layoutName;
m_SupportedDevices.index = numDevices;
Apply();
},
mode: InputControlPicker.Mode.PickDevice);
dropdown.Show(rect);
},
drawElementCallback =
(rect, index, isActive, isFocused) =>
{
var layoutName = m_Settings.supportedDevices[index];
var icon = EditorInputControlLayoutCache.GetIconForLayout(layoutName);
if (icon != null)
{
var iconRect = rect;
iconRect.width = 20;
rect.x += 20;
rect.width -= 20;
GUI.Label(iconRect, icon);
}
EditorGUI.LabelField(rect, layoutName);
}
};
m_iOSProvider = new InputSettingsiOSProvider(m_SettingsObject);
}