protected void Add(ISettingItem item)
{
if (item.IsHidden == false)
{
items.Add(item);
}
if (item is ISettingValue)
{
if (item.IsHidden == false)
{
settings.Add(item as ISettingValue);
}
AllValues.Add(item as ISettingValue);
}
else if (item is SettingCategrory)
{
if (item.IsHidden == false)
{
settings.AddRange((item as SettingCategrory).settings);
}
AllValues.AddRange((item as SettingCategrory).AllValues);
}
}
public CefBrowserProvider(IHttpProxy proxy, IShellContextService shellContextService, ISettingsManager settings)
{
this.proxy = proxy;
this.shellContextService = shellContextService;
clearCacheOnStartup = settings.Register("cef.clear_cache_on_startup", false);
}
/// <summary>
/// Configures the unique UDP connection.
/// </summary>
/// <param name="connectionInfo">The connection information.</param>
/// <param name="reporter">The reporter.</param>
/// <param name="timeout">The timeout in milliseconds.</param>
/// <param name="retryLimit">The retry limit.</param>
/// <returns>UdpConnectionInfo.</returns>
/// <exception cref="System.Exception">Device send IP address and/or port could not be configured for unique connection.</exception>
/// <autogeneratedoc />
/// <remarks>
/// The device may not respond for up to 5 seconds. The total retry period must therefore be greater than 5 seconds.
/// </remarks>
public static UdpConnectionInfo ConfigureUniqueUdpConnection(UdpConnectionInfo connectionInfo, IReporter reporter = null, int timeout = 500, int retryLimit = 20)
{
UdpConnectionInfo uniqueConnectionInfo = UdpConnectionInfo.CreateUniqueConnectionInfo(connectionInfo);
Connection uniqueConnection = new Connection(uniqueConnectionInfo);
try
{
if (reporter != null)
{
uniqueConnection.Error += reporter.OnError;
uniqueConnection.Exception += reporter.OnException;
uniqueConnection.Info += reporter.OnInfo;
uniqueConnection.Message += reporter.OnMessage;
}
// connect using the correct receive Port
uniqueConnection.Connect();
uniqueConnection.Settings.WifiSendIPAddress.Value = uniqueConnectionInfo.AdapterIPAddress;
uniqueConnection.Settings.WifiSendPort.Value = (ushort)uniqueConnectionInfo.ReceivePort;
ISettingItem[] settingsToBeWritten = new ISettingItem[] { uniqueConnection.Settings.WifiSendIPAddress, uniqueConnection.Settings.WifiSendPort };
int retryCount = 0;
while (true)
{
if (uniqueConnection.Settings.Write(settingsToBeWritten, reporter, timeout, 0) == CommunicationProcessResult.Success)
{
break;
}
else if (retryCount++ <= retryLimit)
{
Commands.Send(uniqueConnection, Command.Apply, 0, 0);
}
else
{
throw new Exception("Device send IP address and/or port could not be configured for unique connection.");
}
}
}
finally
{
uniqueConnection.Close();
if (reporter != null)
{
uniqueConnection.Error -= reporter.OnError;
uniqueConnection.Exception -= reporter.OnException;
uniqueConnection.Info -= reporter.OnInfo;
uniqueConnection.Message -= reporter.OnMessage;
}
}
return(uniqueConnectionInfo);
}
public async Task ExecuteSetting(ISettingItem o)
{
if (o != null)
{
try {
await o.Execute(this.Container, this.NS);
}
catch (Exception e) {
throw e;
}
}
}
/// <summary>
/// Initializes a new instance of the SettingItem class.
/// </summary>
/// <param name="settingId">The setting ID.</param>
public SettingItem(string settingId)
{
string dllPath = GetSettingDll(settingId);
if (dllPath == null)
{
throw new SettingFailedException("No such setting");
}
this.settingItem = this.GetSettingItem(settingId, dllPath);
this.SettingType = this.settingItem.Type;
}
/// <summary>
/// Initializes a new instance of the SettingItem class.
/// </summary>
/// <param name="settingId">The setting ID.</param>
/// <param name="dryRun">true to make Invoke and SetValue methods do nothing.</param>
public SettingItem(string settingId, bool dryRun = false, bool async = false)
{
this.async = async;
this.dryRun = dryRun;
string dllPath = this.GetSettingDll(settingId);
if (dllPath == null)
{
throw new SettingFailedException("No such setting");
}
this.settingItem = this.GetSettingItem(settingId, dllPath);
this.SettingType = this.settingItem.Type;
}
/// <summary>
/// Wait for <code>IsUpdating</code> to be false
/// </summary>
/// <param name="item"></param>
/// <param name="timeoutInSeconds">The longeset time to wait for</param>
/// <returns>Whether the item completed updated within the allotted time</returns>
public static Task <(bool, long)> WaitForUpdate(this ISettingItem item, int timeoutInSeconds)
{
var task = new Task <(bool, long)>(() =>
{
var timeoutInMilliseconds = timeoutInSeconds * 1000;
var watch = new Stopwatch();
watch.Start();
while (item.IsUpdating && watch.ElapsedMilliseconds < timeoutInMilliseconds)
{
// Busy wait for the first 50ms and then sleep for 50ms intervals
if (watch.ElapsedMilliseconds > 50)
{
Thread.Sleep(50);
}
}
return(!item.IsUpdating, watch.ElapsedMilliseconds);
});
task.Start();
return(task);
}
/// <summary>
/// Returns a new field set with legend for a new settings group
/// </summary>
/// <param name="currentItem">
/// The settings item
/// </param>
/// <returns>
/// Fieldset control
/// </returns>
private static HtmlGenericControl CreateNewFieldSet(ISettingItem currentItem)
{
// start a new fieldset
var fieldset = new HtmlGenericControl("fieldset");
fieldset.Attributes.Add(
"class", string.Concat("SettingsTableGroup ", currentItem.Group.ToString().ToLower()));
// create group legend
var legend = new HtmlGenericControl("legend");
legend.Attributes.Add("class", "SubSubHead");
var legendText = new Localize
{
TextKey = currentItem.Group.ToString(), Text = currentItem.GroupDescription
};
legend.Controls.Add(legendText);
fieldset.Controls.Add(legend);
return(fieldset);
}
/// <summary>
/// Inserts or updates the setting.
/// </summary>
/// <param name="settingItem">
/// The setting item.
/// </param>
/// <remarks>
/// </remarks>
public void Upsert(ISettingItem settingItem)
{
UpdatePortalSetting(this.PortalID, settingItem.EnglishName, Convert.ToString(settingItem.Value));
}
/// <summary>
/// Inserts or updates the setting.
/// </summary>
/// <param name="settingItem">
/// The setting item.
/// </param>
/// <remarks>
/// </remarks>
public void Upsert(ISettingItem settingItem)
{
UpdatePageSettings(this.PageID, settingItem.EnglishName, settingItem.Value.ToString());
}
/// <summary>
/// Returns one settings row that contains a cell for help, a cell for setting item
/// name and a cell for setting item and validators.
/// </summary>
/// <param name="currentSetting">
/// The current setting.
/// </param>
/// <param name="currentItem">
/// The current item.
/// </param>
/// <returns>
/// A table row.
/// </returns>
private TableRow CreateOneSettingRow(string currentSetting, ISettingItem currentItem)
{
// the table row is going to have three cells
var row = new TableRow();
// cell for help icon and description
var helpCell = new TableCell();
Image img;
if (currentItem.Description.Length > 0)
{
var myimg = ((Page)this.Page).CurrentTheme.GetImage("Buttons_Help", "Help.gif");
img = new Image
{
ImageUrl = myimg.ImageUrl,
Height = myimg.Height,
Width = myimg.Width,
AlternateText = currentItem.Description
};
// Jminond: added netscape tooltip support
img.Attributes.Add("title", General.GetString(currentSetting + "_DESCRIPTION"));
img.ToolTip = General.GetString(currentSetting + "_DESCRIPTION"); // Fixed key for simplicity
}
else
{
// Jes1111 - 17/12/2004
img = new Image
{
Width = Unit.Pixel(25),
ImageUrl = ((Page)this.Page).CurrentTheme.GetImage("Spacer", "Spacer.gif").ImageUrl
};
}
helpCell.Controls.Add(img);
// add help cell to the row
row.Cells.Add(helpCell);
// Setting Name cell
var nameCell = new TableCell();
nameCell.Attributes.Add("width", "20%");
nameCell.CssClass = "SubHead";
nameCell.Text = currentItem.EnglishName.Length == 0
? General.GetString(currentSetting, currentSetting + "<br />Key Not In Resources")
: General.GetString(currentItem.EnglishName, currentItem.EnglishName);
// add name cell to the row
row.Cells.Add(nameCell);
// Setting Control cell
var settingCell = new TableCell();
settingCell.Attributes.Add("width", "80%");
settingCell.CssClass = "st-control";
StringBuilder script = new StringBuilder();
script.Append("<script language=\"javascript\" type=\"text/javascript\">");
//script.AppendFormat("$.extend($.ui.multiselect, { locale: { addAll: '{0}', removeAll: '{1}', itemsCount: '{2}' }});", "Agregar todo", "Remover todooooo", "items seleccionados");
script.Append("$.extend($.ui.multiselect, { locale: { addAll: '");
script.AppendFormat("{0}",General.GetString("ADD_ALL", "Add all", null));
script.Append("',removeAll: '");
script.AppendFormat("{0}", General.GetString("REMOVE_ALL", "Remove all", null));
script.Append("',itemsCount: '");
script.AppendFormat("{0}", General.GetString("ITEMS_SELECTED", "items selected", null));
script.Append("' }});$(function(){ $.localise('ui-multiselect', {path: 'aspnet_client/jQuery/'});");
script.Append("$(\".multiselect\").multiselect({sortable: false, searchable: false});}); </script>");
this.Page.ClientScript.RegisterStartupScript(this.Page.GetType(), "jqueryMultiselect", script.ToString());
Control editControl;
try
{
editControl = currentItem.EditControl;
editControl.ID = currentSetting; // Jes1111
editControl.EnableViewState = true;
}
catch (Exception)
{
editControl = new LiteralControl("There was an error loading this control");
// LogHelper.Logger.Log(Appleseed.Framework.LogLevel.Warn, "There was an error loading '" + currentItem.EnglishName + "'", ex);
}
settingCell.Controls.Add(editControl);
// TODO: WHAT IS THIS?
// nameText.LabelForControl = editControl.ClientID;
// Add control to edit controls collection
this.EditControls.Add(currentSetting, editControl);
// Validators
settingCell.Controls.Add(new LiteralControl("<br />"));
// Required
// TODO : Whhn we bring back ELB easy list box, we need to put this back
/*
if (currentItem.Required && !(editControl is ELB.EasyListBox))
{
RequiredFieldValidator req = new RequiredFieldValidator();
req.ErrorMessage =General.GetString("SETTING_REQUIRED", "%1% is required!", req).Replace("%1%", currentSetting);
req.ControlToValidate = currentSetting;
req.CssClass = "Error";
req.Display = ValidatorDisplay.Dynamic;
req.EnableClientScript = true;
settingCell.Controls.Add(req);
}
*/
// Range Validator
if (currentItem.MinValue != 0 || currentItem.MaxValue != 0)
{
var rang = new RangeValidator();
switch (currentItem.Value.GetType().Name.ToLowerInvariant())
{
case "string":
rang.Type = ValidationDataType.String;
break;
case "int":
rang.Type = ValidationDataType.Integer;
break;
// case PropertiesDataType.Currency:
// rang.Type = ValidationDataType.Currency;
// break;
case "datetime":
rang.Type = ValidationDataType.Date;
break;
case "double":
rang.Type = ValidationDataType.Double;
break;
}
if (currentItem.MinValue >= 0 && currentItem.MaxValue >= currentItem.MinValue)
{
rang.MinimumValue = currentItem.MinValue.ToString();
if (currentItem.MaxValue == 0)
{
rang.ErrorMessage =
General.GetString(
"SETTING_EQUAL_OR_GREATER", "%1% must be equal or greater than %2%!", rang).Replace(
"%1%", currentSetting).Replace("%2%", currentItem.MinValue.ToString());
}
else
{
rang.MaximumValue = currentItem.MaxValue.ToString();
rang.ErrorMessage =
General.GetString("SETTING_BETWEEN", "%1% must be between %2% and %3%!", rang).Replace(
"%1%", currentSetting).Replace("%2%", currentItem.MinValue.ToString()).Replace(
"%3%", currentItem.MaxValue.ToString());
}
}
rang.ControlToValidate = currentSetting;
rang.CssClass = "Error";
rang.Display = ValidatorDisplay.Dynamic;
rang.EnableClientScript = true;
settingCell.Controls.Add(rang);
}
// add setting cell into the row
row.Cells.Add(settingCell);
// all done send it back
return row;
}
/// <summary>
/// Inserts or updates the setting.
/// </summary>
/// <param name="settingItem">
/// The setting item.
/// </param>
/// <remarks>
/// </remarks>
public void Upsert(ISettingItem settingItem)
{
UpdatePageSettings(this.PageID, settingItem.EnglishName, settingItem.Value.ToString());
}
public StringEditorViewModel(ISettingItem item)
{
this.SettingItem = item;
}
public OnOffEditorViewModel(ISettingItem item)
{
this.SettingItem = item;
}
/// <summary>
/// Returns one settings row that contains a cell for help, a cell for setting item
/// name and a cell for setting item and validators.
/// </summary>
/// <param name="currentSetting">
/// The current setting.
/// </param>
/// <param name="currentItem">
/// The current item.
/// </param>
/// <returns>
/// A table row.
/// </returns>
private TableRow CreateOneSettingRow(string currentSetting, ISettingItem currentItem)
{
// the table row is going to have three cells
var row = new TableRow();
// cell for help icon and description
var helpCell = new TableCell();
Image img;
if (currentItem.Description.Length > 0)
{
var myimg = ((Page)this.Page).CurrentTheme.GetImage("Buttons_Help", "Help.gif");
img = new Image
{
ImageUrl = myimg.ImageUrl,
Height = myimg.Height,
Width = myimg.Width,
AlternateText = currentItem.Description
};
// Jminond: added netscape tooltip support
img.Attributes.Add("title", General.GetString(currentSetting + "_DESCRIPTION"));
img.ToolTip = General.GetString(currentSetting + "_DESCRIPTION"); // Fixed key for simplicity
}
else
{
// Jes1111 - 17/12/2004
img = new Image
{
Width = Unit.Pixel(25),
ImageUrl = ((Page)this.Page).CurrentTheme.GetImage("Spacer", "Spacer.gif").ImageUrl
};
}
helpCell.Controls.Add(img);
// add help cell to the row
row.Cells.Add(helpCell);
// Setting Name cell
var nameCell = new TableCell();
nameCell.Attributes.Add("width", "20%");
nameCell.CssClass = "SubHead";
nameCell.Text = currentItem.EnglishName.Length == 0
? General.GetString(currentSetting, currentSetting + "<br />Key Not In Resources")
: General.GetString(currentItem.EnglishName, currentItem.EnglishName);
// add name cell to the row
row.Cells.Add(nameCell);
// Setting Control cell
var settingCell = new TableCell();
settingCell.Attributes.Add("width", "80%");
settingCell.CssClass = "st-control";
StringBuilder script = new StringBuilder();
script.Append("<script language=\"javascript\" type=\"text/javascript\">");
//script.AppendFormat("$.extend($.ui.multiselect, { locale: { addAll: '{0}', removeAll: '{1}', itemsCount: '{2}' }});", "Agregar todo", "Remover todooooo", "items seleccionados");
script.Append("$.extend($.ui.multiselect, { locale: { addAll: '");
script.AppendFormat("{0}", General.GetString("ADD_ALL", "Add all", null));
script.Append("',removeAll: '");
script.AppendFormat("{0}", General.GetString("REMOVE_ALL", "Remove all", null));
script.Append("',itemsCount: '");
script.AppendFormat("{0}", General.GetString("ITEMS_SELECTED", "items selected", null));
script.Append("' }});$(function(){ $.localise('ui-multiselect', {path: 'aspnet_client/jQuery/'});");
script.Append("$(\".multiselect\").multiselect({sortable: false, searchable: false});}); </script>");
this.Page.ClientScript.RegisterStartupScript(this.Page.GetType(), "jqueryMultiselect", script.ToString());
Control editControl;
try
{
editControl = currentItem.EditControl;
editControl.ID = currentSetting; // Jes1111
editControl.EnableViewState = true;
}
catch (Exception)
{
editControl = new LiteralControl("There was an error loading this control");
// LogHelper.Logger.Log(Appleseed.Framework.LogLevel.Warn, "There was an error loading '" + currentItem.EnglishName + "'", ex);
}
settingCell.Controls.Add(editControl);
// TODO: WHAT IS THIS?
// nameText.LabelForControl = editControl.ClientID;
// Add control to edit controls collection
this.EditControls.Add(currentSetting, editControl);
// Validators
settingCell.Controls.Add(new LiteralControl("<br />"));
// Required
// TODO : Whhn we bring back ELB easy list box, we need to put this back
/*
* if (currentItem.Required && !(editControl is ELB.EasyListBox))
* {
* RequiredFieldValidator req = new RequiredFieldValidator();
* req.ErrorMessage =General.GetString("SETTING_REQUIRED", "%1% is required!", req).Replace("%1%", currentSetting);
* req.ControlToValidate = currentSetting;
* req.CssClass = "Error";
* req.Display = ValidatorDisplay.Dynamic;
* req.EnableClientScript = true;
* settingCell.Controls.Add(req);
* }
*/
// Range Validator
if (currentItem.MinValue != 0 || currentItem.MaxValue != 0)
{
var rang = new RangeValidator();
switch (currentItem.Value.GetType().Name.ToLowerInvariant())
{
case "string":
rang.Type = ValidationDataType.String;
break;
case "int":
case "int16":
case "int32":
case "int64":
rang.Type = ValidationDataType.Integer;
break;
// case PropertiesDataType.Currency:
// rang.Type = ValidationDataType.Currency;
// break;
case "datetime":
rang.Type = ValidationDataType.Date;
break;
case "double":
rang.Type = ValidationDataType.Double;
break;
}
if (currentItem.MinValue >= 0 && currentItem.MaxValue >= currentItem.MinValue)
{
rang.MinimumValue = currentItem.MinValue.ToString();
if (currentItem.MaxValue == 0)
{
rang.ErrorMessage =
General.GetString(
"SETTING_EQUAL_OR_GREATER", "%1% must be equal or greater than %2%!", rang).Replace(
"%1%", General.GetString(currentSetting)).Replace("%2%", currentItem.MinValue.ToString());
}
else
{
rang.MaximumValue = currentItem.MaxValue.ToString();
rang.ErrorMessage =
General.GetString("SETTING_BETWEEN", "%1% must be between %2% and %3%!", rang).Replace(
"%1%", General.GetString(currentSetting)).Replace("%2%", currentItem.MinValue.ToString()).Replace(
"%3%", currentItem.MaxValue.ToString());
}
}
rang.ControlToValidate = currentSetting;
rang.CssClass = "Error";
rang.Display = ValidatorDisplay.Dynamic;
rang.EnableClientScript = true;
settingCell.Controls.Add(rang);
}
// add setting cell into the row
row.Cells.Add(settingCell);
// all done send it back
return(row);
}
/// <summary>
/// Inserts or updates the setting.
/// </summary>
/// <param name="settingItem">
/// The setting item.
/// </param>
/// <remarks>
/// </remarks>
public void Upsert(ISettingItem settingItem)
{
UpdateModuleSetting(this.ModuleID, settingItem.EnglishName, settingItem.Value.ToString());
}
/// <summary>
/// Inserts or updates the setting.
/// </summary>
/// <param name="settingItem">
/// The setting item.
/// </param>
/// <remarks>
/// </remarks>
public void Upsert(ISettingItem settingItem)
{
UpdateModuleSetting(this.ModuleID, settingItem.EnglishName, settingItem.Value.ToString());
}
/// <summary>
/// Returns a new field set with legend for a new settings group
/// </summary>
/// <param name="currentItem">
/// The settings item
/// </param>
/// <returns>
/// Fieldset control
/// </returns>
private static HtmlGenericControl CreateNewFieldSet(ISettingItem currentItem)
{
// start a new fieldset
var fieldset = new HtmlGenericControl("fieldset");
fieldset.Attributes.Add(
"class", string.Concat("SettingsTableGroup ", currentItem.Group.ToString().ToLower()));
// create group legend
var legend = new HtmlGenericControl("legend");
legend.Attributes.Add("class", "SubSubHead");
var legendText = new Localize
{
TextKey = currentItem.Group.ToString(), Text = currentItem.GroupDescription
};
legend.Controls.Add(legendText);
fieldset.Controls.Add(legend);
return fieldset;
}
/// <summary>
/// Sets the specified setting name.
/// </summary>
/// <param name="settingHolder">The setting holder.</param>
/// <param name="settingItem">The setting item.</param>
/// <remarks></remarks>
public void Set(ISettingHolder settingHolder, ISettingItem settingItem)
{
settingHolder.Upsert(settingItem);
}
public DebugSettingView(UWPHttpProviderSelector selector)
{
DebugData = selector.Settings.Debug;
DebugProvider = selector.Current as DebugHttpProvider;
InitializeComponent();
}
public AccountEditorViewModel(ISettingItem item)
{
this.SettingItem = item;
}