protected override bool Run_Iteration_Routine(IDensity_Solve dens_solv, IPoisson_Solve pois_solv, double tol, int max_iterations)
{
dens_solv.Reset_DFT_Potential();
dens_solv.Update_DFT_Potential(carrier_charge_density);
int count = 0;
bool converged = false;
if (!no_dft)
dens_solv.DFT_Mixing_Parameter = 0.1;
dens_diff_lim = 0.12;
while (!converged)
{
Stopwatch stpwch = new Stopwatch();
stpwch.Start();
// save old density data
Band_Data dens_old = carrier_charge_density.Spin_Summed_Data.DeepenThisCopy();
// Get charge rho(phi) (not dopents as these are included as a flexPDE input)
dens_solv.Get_ChargeDensity(layers, ref carrier_charge_density, ref dopent_charge_density, chem_pot);
Set_Edges(carrier_charge_density);
// Generate an approximate charge-dependent part of the Jacobian, g'(phi) = - d(eps * d( )) - rho'(phi) using the Thomas-Fermi semi-classical method
SpinResolved_Data rho_prime = dens_solv.Get_ChargeDensity_Deriv(layers, carrier_charge_density_deriv, dopent_charge_density_deriv, chem_pot);
Set_Edges(rho_prime);
// Solve stepping equation to find raw Newton iteration step, g'(phi) x = - g(phi)
gphi = -1.0 * chem_pot.Laplacian / Physics_Base.q_e - carrier_charge_density.Spin_Summed_Data - dopent_charge_density.Spin_Summed_Data;
Set_Edges(gphi);
x = pois_solv.Calculate_Newton_Step(rho_prime, gphi, carrier_charge_density, dens_solv.DFT_Potential, dens_solv.Get_XC_Potential(carrier_charge_density));
// chem_pot = pois_solv.Chemical_Potential;
// Calculate optimal damping parameter, t, (but damped damping....)
if (t == 0.0)
t = t_min;
t = t_damp * Calculate_optimal_t(t / t_damp, chem_pot / Physics_Base.q_e, x, carrier_charge_density, dopent_charge_density, pois_solv, dens_solv, t_min);
if (t < 0.0)
{
Console.WriteLine("Iterator has stalled, setting t = 0");
t = 0.0;
}
// and check convergence of density
Band_Data dens_diff = carrier_charge_density.Spin_Summed_Data - dens_old;
Band_Data car_dens_spin_summed = carrier_charge_density.Spin_Summed_Data;
double carrier_dens_abs_max = Math.Max(Math.Abs(car_dens_spin_summed.Min()), Math.Abs(car_dens_spin_summed.Max()));
// using the relative absolute density difference
for (int i = 0; i < dens_diff.Length; i++)
// only calculate density difference for densities more than 1% of the maximum value
if (Math.Abs(car_dens_spin_summed[i]) > 0.01 * carrier_dens_abs_max)
dens_diff[i] = Math.Abs(dens_diff[i] / car_dens_spin_summed[i]);
else
dens_diff[i] = 0.0;
// only renew DFT potential when the difference in density has converged and the iterator has done at least 3 iterations
if (dens_diff.Max() < dens_diff_lim && t > 10.0 * t_min && count > 3)
{
// and set the DFT potential
if (dens_solv.DFT_Mixing_Parameter != 0.0)
dens_solv.Print_DFT_diff(carrier_charge_density);
dens_solv.Update_DFT_Potential(carrier_charge_density);
// also... if the difference in the old and new dft potentials is greater than for the previous V_xc update, reduce the dft mixing parameter
double current_vxc_diff = Math.Max(dens_solv.DFT_diff(carrier_charge_density).Max(), (-1.0 * dens_solv.DFT_diff(carrier_charge_density).Min()));
if (current_vxc_diff > max_vxc_diff && dens_diff_lim / 2.0 > min_dens_diff || no_dft)
{
dens_diff_lim /= 2.0;
Console.WriteLine("Minimum percentage density difference reduced to " + dens_diff_lim.ToString());
}
max_vxc_diff = current_vxc_diff;
// solution is converged if the density accuracy is better than half the minimum possible value for changing the dft potential
if (dens_diff.Max() < min_dens_diff / 2.0 && current_vxc_diff < min_vxc_diff && Physics_Base.q_e * x.InfinityNorm() < tol && t != t_min)
converged = true;
}
// update t for Poisson solver
pois_solv.T = t;
chem_pot = chem_pot + t * Physics_Base.q_e * x;
base.Checkpoint();
if (count == 0)
pot_init = Physics_Base.q_e * x.InfinityNorm();
stpwch.Stop();
Console.WriteLine("Iter = " + count.ToString() + "\tDens = " + dens_diff.Max().ToString("F4") + "\tPot = " + (Physics_Base.q_e * x.InfinityNorm()).ToString("F6") + "\tt = " + t.ToString("F5") + "\ttime = " + stpwch.Elapsed.TotalMinutes.ToString("F"));
count++;
// File.Copy("split_gate.pg6", "split_gate_" + count.ToString("000") + ".pg6");
// reset the potential if the added potential t * x is too small
if (converged || count > max_iterations)
{
Console.WriteLine("Maximum potential change at end of iteration was " + (t * Physics_Base.q_e * x.InfinityNorm()).ToString());
break;
}
}
Console.WriteLine("Iteration complete");
return converged;
}
protected override bool Run_Iteration_Routine(IDensity_Solve dens_solv, IPoisson_Solve pois_solv, double tol, int max_iterations)
{
dens_solv.Reset_DFT_Potential();
dens_solv.Update_DFT_Potential(carrier_charge_density);
int count = 0;
bool converged = false;
if (!no_dft)
{
dens_solv.DFT_Mixing_Parameter = 0.1;
}
dens_diff_lim = 0.12;
while (!converged)
{
Stopwatch stpwch = new Stopwatch();
stpwch.Start();
// save old density data
Band_Data dens_old = carrier_charge_density.Spin_Summed_Data.DeepenThisCopy();
// Get charge rho(phi) (not dopents as these are included as a flexPDE input)
dens_solv.Get_ChargeDensity(layers, ref carrier_charge_density, ref dopent_charge_density, chem_pot);
Set_Edges(carrier_charge_density);
// Generate an approximate charge-dependent part of the Jacobian, g'(phi) = - d(eps * d( )) - rho'(phi) using the Thomas-Fermi semi-classical method
SpinResolved_Data rho_prime = dens_solv.Get_ChargeDensity_Deriv(layers, carrier_charge_density_deriv, dopent_charge_density_deriv, chem_pot);
Set_Edges(rho_prime);
// Solve stepping equation to find raw Newton iteration step, g'(phi) x = - g(phi)
gphi = -1.0 * chem_pot.Laplacian / Physics_Base.q_e - carrier_charge_density.Spin_Summed_Data - dopent_charge_density.Spin_Summed_Data;
Set_Edges(gphi);
x = pois_solv.Calculate_Newton_Step(rho_prime, gphi, carrier_charge_density, dens_solv.DFT_Potential, dens_solv.Get_XC_Potential(carrier_charge_density));
// chem_pot = pois_solv.Chemical_Potential;
// Calculate optimal damping parameter, t, (but damped damping....)
if (t == 0.0)
{
t = t_min;
}
t = t_damp * Calculate_optimal_t(t / t_damp, chem_pot / Physics_Base.q_e, x, carrier_charge_density, dopent_charge_density, pois_solv, dens_solv, t_min);
if (t < 0.0)
{
Console.WriteLine("Iterator has stalled, setting t = 0");
t = 0.0;
}
// and check convergence of density
Band_Data dens_diff = carrier_charge_density.Spin_Summed_Data - dens_old;
Band_Data car_dens_spin_summed = carrier_charge_density.Spin_Summed_Data;
double carrier_dens_abs_max = Math.Max(Math.Abs(car_dens_spin_summed.Min()), Math.Abs(car_dens_spin_summed.Max()));
// using the relative absolute density difference
for (int i = 0; i < dens_diff.Length; i++)
{
// only calculate density difference for densities more than 1% of the maximum value
if (Math.Abs(car_dens_spin_summed[i]) > 0.01 * carrier_dens_abs_max)
{
dens_diff[i] = Math.Abs(dens_diff[i] / car_dens_spin_summed[i]);
}
else
{
dens_diff[i] = 0.0;
}
}
// only renew DFT potential when the difference in density has converged and the iterator has done at least 3 iterations
if (dens_diff.Max() < dens_diff_lim && t > 10.0 * t_min && count > 3)
{
// and set the DFT potential
if (dens_solv.DFT_Mixing_Parameter != 0.0)
{
dens_solv.Print_DFT_diff(carrier_charge_density);
}
dens_solv.Update_DFT_Potential(carrier_charge_density);
// also... if the difference in the old and new dft potentials is greater than for the previous V_xc update, reduce the dft mixing parameter
double current_vxc_diff = Math.Max(dens_solv.DFT_diff(carrier_charge_density).Max(), (-1.0 * dens_solv.DFT_diff(carrier_charge_density).Min()));
if (current_vxc_diff > max_vxc_diff && dens_diff_lim / 2.0 > min_dens_diff || no_dft)
{
dens_diff_lim /= 2.0;
Console.WriteLine("Minimum percentage density difference reduced to " + dens_diff_lim.ToString());
}
max_vxc_diff = current_vxc_diff;
// solution is converged if the density accuracy is better than half the minimum possible value for changing the dft potential
if (dens_diff.Max() < min_dens_diff / 2.0 && current_vxc_diff < min_vxc_diff && Physics_Base.q_e * x.InfinityNorm() < tol && t != t_min)
{
converged = true;
}
}
// update t for Poisson solver
pois_solv.T = t;
chem_pot = chem_pot + t * Physics_Base.q_e * x;
base.Checkpoint();
if (count == 0)
{
pot_init = Physics_Base.q_e * x.InfinityNorm();
}
stpwch.Stop();
Console.WriteLine("Iter = " + count.ToString() + "\tDens = " + dens_diff.Max().ToString("F4") + "\tPot = " + (Physics_Base.q_e * x.InfinityNorm()).ToString("F6") + "\tt = " + t.ToString("F5") + "\ttime = " + stpwch.Elapsed.TotalMinutes.ToString("F"));
count++;
// File.Copy("split_gate.pg6", "split_gate_" + count.ToString("000") + ".pg6");
// reset the potential if the added potential t * x is too small
if (converged || count > max_iterations)
{
Console.WriteLine("Maximum potential change at end of iteration was " + (t * Physics_Base.q_e * x.InfinityNorm()).ToString());
break;
}
}
Console.WriteLine("Iteration complete");
return(converged);
}
protected override bool Run_Iteration_Routine(IDensity_Solve dens_solv, IPoisson_Solve pois_solv, double tol, int max_iterations)
{
// calculate initial potential with the given charge distribution
// Console.WriteLine("Calculating initial potential grid");
// pois_solv.Initiate_Poisson_Solver(device_dimensions, boundary_conditions);
// chem_pot = pois_solv.Get_Chemical_Potential(carrier_density.Spin_Summed_Data);
// Console.WriteLine("Initial grid complete");
//dens_solv.Set_DFT_Potential(carrier_charge_density);
//if (!no_dft)
//{
// dens_solv.DFT_Mixing_Parameter = 0.3;
//dens_solv.Get_ChargeDensity(layers, ref carrier_charge_density, ref dopent_charge_density, chem_pot);
//}
dens_solv.Reset_DFT_Potential();
dens_solv.Update_DFT_Potential(carrier_charge_density);
int count = 0;
bool converged = false;
double dens_diff_lim = 0.1; // the maximum percentage change in the density required for update of V_xc
double max_vxc_diff = double.MaxValue; // maximum difference for dft potential... if this increases, the dft mixing parameter is reduced
while (!converged)
{
Stopwatch stpwch = new Stopwatch();
stpwch.Start();
// save old density data
Band_Data dens_old = carrier_charge_density.Spin_Summed_Data.DeepenThisCopy();
// Get charge rho(phi) (not dopents as these are included as a flexPDE input)
dens_solv.Get_ChargeDensity(layers, ref carrier_charge_density, ref dopent_charge_density, chem_pot);
// Generate an approximate charge-dependent part of the Jacobian, g'(phi) = - d(eps * d( )) - rho'(phi) using the Thomas-Fermi semi-classical method
SpinResolved_Data rho_prime = dens_solv.Get_ChargeDensity_Deriv(layers, carrier_charge_density_deriv, dopent_charge_density_deriv, chem_pot);
// Solve stepping equation to find raw Newton iteration step, g'(phi) x = - g(phi)
gphi = -1.0 * chem_pot.Laplacian / Physics_Base.q_e - carrier_charge_density.Spin_Summed_Data - dopent_charge_density.Spin_Summed_Data;
x = pois_solv.Calculate_Newton_Step(rho_prime, gphi, carrier_charge_density, dens_solv.DFT_Potential, dens_solv.Get_XC_Potential(carrier_charge_density));
//chem_pot = pois_solv.Chemical_Potential;
// Calculate optimal damping parameter, t, (but damped damping....)
if (t == 0.0)
{
t = t_min;
}
t = t_damp * Calculate_optimal_t(t / t_damp, chem_pot / Physics_Base.q_e, x, carrier_charge_density, dopent_charge_density, pois_solv, dens_solv, t_min);
// if (count % 5 == 0 && t == t_damp * t_min)
// {
// t_min *= 2.0;
// Console.WriteLine("Iterator has stalled, doubling t_min to " + t_min.ToString());
// }
// and check convergence of density
Band_Data car_dens_spin_summed = carrier_charge_density.Spin_Summed_Data;
Band_Data dens_diff = car_dens_spin_summed - dens_old;
double carrier_dens_abs_max = Math.Max(Math.Abs(car_dens_spin_summed.Min()), Math.Abs(car_dens_spin_summed.Max()));
// using the relative absolute density difference
for (int i = 0; i < dens_diff.Length; i++)
{
// only calculate density difference for densities more than 1% of the maximum value
if (Math.Abs(car_dens_spin_summed[i]) > 0.01 * carrier_dens_abs_max)
{
dens_diff[i] = Math.Abs(dens_diff[i] / car_dens_spin_summed[i]);
}
else
{
dens_diff[i] = 0.0;
}
}
//if (Math.Max(t * x.Max(), (-t * x).Max()) < pot_lim && t > 10.0 * t_min)
// only renew DFT potential when the difference in density has converged and the iterator has done at least 3 iterations
if (dens_diff.Max() < dens_diff_lim && t > 10.0 * t_min && count > 3)
{
// once dft potential is starting to be mixed in, set the maximum count to lots
// max_count = 1000;
// and set the DFT potential
dens_solv.Update_DFT_Potential(carrier_charge_density);
// also... if the difference in the old and new dft potentials is greater than for the previous V_xc update, reduce the dft mixing parameter
double current_vxc_diff = Math.Max(dens_solv.DFT_diff(carrier_charge_density).Max(), (-1.0 * dens_solv.DFT_diff(carrier_charge_density).Min()));
// if (current_dens_diff > max_diff && dens_solv.DFT_Mixing_Parameter / 3.0 > min_alpha)
// {
// dens_solv.DFT_Mixing_Parameter /= 3.0; // alpha is only incremented if it will be above the value of min_alpha
// dens_diff_lim /= 3.0;
// Console.WriteLine("DFT mixing parameter reduced to " + dens_solv.DFT_Mixing_Parameter.ToString());
// }
if (current_vxc_diff > max_vxc_diff && !no_dft)
{
dens_diff_lim /= 2.0;
//dens_solv.Print_DFT_diff(carrier_charge_density);
Console.WriteLine("Minimum percentage density difference reduced to " + dens_diff_lim.ToString());
}
max_vxc_diff = current_vxc_diff;
// if (alpha_dft <= 0.1)
// {
// alpha_dft += 0.01;
// Console.WriteLine("Setting DFT mixing parameter to " + alpha_dft.ToString());
// dens_solv.Set_DFT_Mixing_Parameter(alpha_dft);
// }
// if (Math.Max(dens_solv.DFT_diff(carrier_density).Max(), (-1.0 * dens_solv.DFT_diff(carrier_density).Min())) < pot_lim)
// converged = true;
// solution is converged if the density accuracy is better than half the minimum possible value for changing the dft potential
// also, check that the maximum change in the absolute value of the potential is less than a tolerance (default is 0.1meV)
if (dens_solv.DFT_diff(carrier_charge_density).InfinityNorm() < tol && Physics_Base.q_e * x.InfinityNorm() < tol)
{
converged = true;
}
}
/*
* // Recalculate the charge density but for the updated potential rho(phi + t * x)
* bool edges_fine = false;
* while (!edges_fine)
* {
* edges_fine = true;
* SpinResolved_Data tmp_dens = dens_solv.Get_ChargeDensity(layers, carrier_density, dopent_density, chem_pot + t * x);
* for (int i = 1; i < ny_dens - 1; i++)
* for (int j = 1; j < nz_dens - 1; j++)
* //if (i == 1 || j == 1 || i == ny_dens - 2 || j == nz_dens - 2)
* if (i == 1 || i == ny_dens - 2)
* if (Math.Abs(tmp_dens.Spin_Summed_Data.mat[i, j]) > edge_min_charge)
* {
* if (x.mat.Max() > 0)
* t = 0.5 * t;
* else
* t = 2.0 * t;
*
* if (t > t_min)
* {
* edges_fine = false;
* goto end;
* }
* else
* {
* // although the edges are not fine at this point, we don't want the code to decrease t any further so we
* // break the loop by setting...
* edges_fine = true;
* goto end;
* }
* }
*
* if (!edges_fine)
* throw new Exception("Error - Unable to reduce density to zero at edge of density domain.\nSimulation aborted");
*
* end:
* //if (t < t_damp * t_min)
* //{
* // Console.WriteLine("Unable to reduce density to zero at edge of density domain\nRecalculating potential");
* // pois_solv.Set_Boundary_Conditions(top_V, split_V, split_width, bottom_V, surface_charge);
* // chem_pot = pois_solv.Get_Chemical_Potential(carrier_density.Spin_Summed_Data);
* // dens_solv.Get_ChargeDensity(layers, ref carrier_density, ref dopent_density, chem_pot);
* // Console.WriteLine("Potential recalculated");
* // edges_fine = true;
* //}
* //else
* continue;
* }*/
// update band energy phi_new = phi_old + t * x
pois_solv.T = t;
chem_pot = chem_pot + t * Physics_Base.q_e * x;
//// and set the DFT potential
//if (count % 10 == 0)
// dens_solv.Print_DFT_diff(carrier_density);
//dens_solv.Set_DFT_Potential(carrier_density);
base.Checkpoint();
if (count == 0)
{
pot_init = Physics_Base.q_e * x.InfinityNorm();
}
stpwch.Stop();
Console.WriteLine(Generate_Output_String(count, x, dens_diff) + "\ttime = " + stpwch.Elapsed.TotalMinutes.ToString("F"));
if (dens_solv.DFT_Mixing_Parameter != 0.0 && dens_diff.Max() < dens_diff_lim && count > 3)
{
dens_solv.Print_DFT_diff(carrier_charge_density);
}
count++;
// reset the potential if the added potential t * x is too small
if (converged || count > max_iterations)
{
Console.WriteLine("Maximum potential change at end of iteration was " + (t * Physics_Base.q_e * x.InfinityNorm()).ToString());
break;
}
}
Console.WriteLine("Iteration complete");
return(converged);
}