protected override void OnActivate() { //get the cadastral editor and target fabric m_pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension"); m_pCadFab = m_pCadEd.CadastralFabric; if (m_pCadFab == null) { MessageBox.Show("No target fabric found. Please add a fabric to the map start editing, and try again."); return; } m_pFabricLines = (IFeatureClass)m_pCadFab.get_CadastralTable(esriCadastralFabricTable.esriCFTLines); m_editor.CurrentTask = null; m_edSketch = m_editor as IEditSketch3; m_edSketch.GeometryType = esriGeometryType.esriGeometryPolyline; m_csc = new TraceConstructorClass(); m_csc.Initialize(m_editor); m_edSketch.ShapeConstructor = m_csc; m_csc.Activate(); // Setup events m_editEvents.OnSketchModified += OnSketchModified; m_editEvents5.OnShapeConstructorChanged += OnShapeConstructorChanged; m_editEvents.OnSketchFinished += OnSketchFinished; }
public bool IsUnVersionedFabric(ICadastralFabric TheFabric) { bool IsFileBasedGDB = false; bool IsUnVersioned = false; ITable pTable = TheFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); IDataset pDS = (IDataset)TheFabric; IWorkspace pWS = pDS.Workspace; IsFileBasedGDB = (!(pWS.WorkspaceFactory.WorkspaceType == esriWorkspaceType.esriRemoteDatabaseWorkspace)); if (!(IsFileBasedGDB)) { IVersionedObject pVersObj = (IVersionedObject)pTable; IsUnVersioned = (!(pVersObj.IsRegisteredAsVersioned)); pTable = null; pVersObj = null; } if (IsUnVersioned && !IsFileBasedGDB) { return(true); } else { return(false); } }
public bool CadastralTableAddField(ICadastralFabric pCadaFab, esriCadastralFabricTable eTable, esriFieldType FieldType, string FieldName, string FieldAlias, int FieldLength) { ITable pTable = pCadaFab.get_CadastralTable(eTable); // First check to see if a field with this name already exists if (pTable.FindField(FieldName) > -1) { if (pTable != null) { Marshal.ReleaseComObject(pTable); } return(false); } IField2 pField = null; try { //Create a new Field pField = new FieldClass(); //QI for IFieldEdit IFieldEdit2 pFieldEdit = (IFieldEdit2)pField; pFieldEdit.Type_2 = FieldType; pFieldEdit.Editable_2 = true; pFieldEdit.IsNullable_2 = true; pFieldEdit.Name_2 = FieldName; pFieldEdit.AliasName_2 = FieldAlias; pFieldEdit.Length_2 = FieldLength; //'.RasterDef_2 = pRasterDef pTable.AddField(pField); if (pField != null) { Marshal.ReleaseComObject(pField); } } catch (COMException ex) { if (pField != null) { Marshal.ReleaseComObject(pField); } MessageBox.Show(ex.Message); return(false); } return(true); }
public bool SetupEditEnvironment(IWorkspace TheWorkspace, ICadastralFabric TheFabric, IEditor TheEditor, out bool IsFileBasedGDB, out bool IsUnVersioned, out bool UseNonVersionedEdit) { IsFileBasedGDB = false; IsUnVersioned = false; UseNonVersionedEdit = false; ITable pTable = TheFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); IsFileBasedGDB = (!(TheWorkspace.WorkspaceFactory.WorkspaceType == esriWorkspaceType.esriRemoteDatabaseWorkspace)); if (!(IsFileBasedGDB)) { IVersionedObject pVersObj = (IVersionedObject)pTable; IsUnVersioned = (!(pVersObj.IsRegisteredAsVersioned)); pTable = null; pVersObj = null; } if (IsUnVersioned && !IsFileBasedGDB) {// DialogResult dlgRes = MessageBox.Show("Fabric is not registered as versioned." + "\r\n You will not be able to undo." + "\r\n Click 'OK' to delete permanently.", "Continue with delete?", MessageBoxButtons.OKCancel); if (dlgRes == DialogResult.OK) { UseNonVersionedEdit = true; } else if (dlgRes == DialogResult.Cancel) { return(false); } //MessageBox.Show("The fabric tables are non-versioned." + // "\r\n Please register as versioned, and try again."); //return false; } else if ((TheEditor.EditState == esriEditState.esriStateNotEditing)) { MessageBox.Show("Please start editing first and try again.", "Delete", MessageBoxButtons.OK, MessageBoxIcon.Information); return(false); } return(true); }
public void GetFabricPlatform(IWorkspace TheWorkspace, ICadastralFabric TheFabric, out bool IsFileBasedGDB, out bool IsUnVersioned) { IsFileBasedGDB = false; IsUnVersioned = false; ITable pTable = TheFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); IsFileBasedGDB = (!(TheWorkspace.WorkspaceFactory.WorkspaceType == esriWorkspaceType.esriRemoteDatabaseWorkspace)); if (!(IsFileBasedGDB)) { IVersionedObject pVersObj = (IVersionedObject)pTable; IsUnVersioned = (!(pVersObj.IsRegisteredAsVersioned)); pVersObj = null; } if (pTable != null) { Marshal.ReleaseComObject(pTable); } }
private IGSPlan FindFabricPlanByName(string PlanName, ICadastralEditor CadastralEditor) { ICursor pCur = null; try { ICadastralFabric pCadaFab = CadastralEditor.CadastralFabric; ITable pPlanTable = pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans); int iPlanNameFldID = pPlanTable.FindField("NAME"); string PlanNameFld = pPlanTable.Fields.get_Field(iPlanNameFldID).Name; IQueryFilter pQF = new QueryFilter(); pQF.WhereClause = PlanNameFld + "= '" + PlanName + "'"; pQF.SubFields = pPlanTable.OIDFieldName + PlanNameFld; pCur = pPlanTable.Search(pQF, false); IRow pPlanRow = pCur.NextRow(); IGSPlan pGSPlan = null; if (pPlanRow != null) { //Since plan was found, generate plan object from database: ICadastralFeatureGenerator pFeatureGenerator = new CadastralFeatureGenerator(); pGSPlan = pFeatureGenerator.CreatePlanFromRow(CadastralEditor, pPlanRow); Marshal.ReleaseComObject(pPlanRow); } return(pGSPlan); } catch (Exception ex) { MessageBox.Show(ex.Message); return(null); } finally { if (pCur != null) { Marshal.ReleaseComObject(pCur); } } }
private IGSPlan FindFabricPlanByName(string PlanName, ICadastralEditor CadastralEditor) { ICursor pCur = null; try { ICadastralFabric pCadaFab = CadastralEditor.CadastralFabric; ITable pPlanTable = pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans); int iPlanNameFldID = pPlanTable.FindField("NAME"); string PlanNameFld = pPlanTable.Fields.get_Field(iPlanNameFldID).Name; IQueryFilter pQF = new QueryFilterClass(); pQF.WhereClause = PlanNameFld + "= '" + PlanName + "'"; pQF.SubFields = pPlanTable.OIDFieldName + PlanNameFld; pCur = pPlanTable.Search(pQF, false); IRow pPlanRow = pCur.NextRow(); IGSPlan pGSPlanDB = null; IGSPlan pGSPlan = null; if (pPlanRow != null) { //Since plan was found, generate plan object from database: ICadastralFeatureGenerator pFeatureGenerator = new CadastralFeatureGeneratorClass(); pGSPlanDB = pFeatureGenerator.CreatePlanFromRow(CadastralEditor, pPlanRow); //Hydrate the database plan as a new GSPlan in GeoSurvey Engine packet pGSPlan = new GSPlanClass(); AssignGSPlan(pGSPlanDB, pGSPlan, true); } return(pGSPlan); } catch (Exception ex) { MessageBox.Show(ex.Message); return(null); } finally { } }
void AddEmptyPlansToList(ICadastralFabric Fabric, IFIDSet EmptyPlansFIDSet, dlgEmptyPlansList EmptyPlansList) { ITable pPlansTable = Fabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans); CheckedListBox list = EmptyPlansList.checkedListBox1; IArray array = new ArrayClass(); for (int idx = 0; idx <= (EmptyPlansFIDSet.Count() - 1); idx++) { // Add the name of the plan to the list Int32 i_x; Int32 iPlanName; iPlanName = pPlansTable.FindField("NAME"); EmptyPlansFIDSet.Next(out i_x); array.Add(i_x); string sPlanName = (string)pPlansTable.GetRow(i_x).get_Value(iPlanName); list.Items.Add(sPlanName, true); } // Bind array of plan ids with the list list.Tag = (object)array; if (list.Items.Count > 0) { EmptyPlansList.checkedListBox1_SelectedValueChanged(null, null); } }
void m_editEvents_OnStartEditing() { AdjustmentDockWindow.SetEnabled(true); ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension"); string m_sFieldName = ""; m_sFieldName = s_extension.FieldName; ICadastralFabric pFabric = pCadEd.CadastralFabric; if (pFabric == null) { return; } IFeatureClass pLinesFC = (IFeatureClass)pFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines); if (pLinesFC.FindField(m_sFieldName) == -1) { m_RecordToField = false; return; } }
protected override void OnClick() { IMouseCursor pMouseCursor = new MouseCursorClass(); pMouseCursor.SetCursor(2); //first get the selected parcel features UID pUID = new UIDClass(); pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}"; ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID); ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID); //check if there is a Manual Mode "modify" job active =========== ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan; if (pCadPacMan.PacketOpen) { MessageBox.Show("The Delete Parcels command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.", "Delete Selected Parcels"); return; } IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor"); IActiveView pActiveView = ArcMap.Document.ActiveView; IMap pMap = pActiveView.FocusMap; ICadastralFabric pCadFabric = null; clsFabricUtils FabricUTILS = new clsFabricUtils(); IProgressDialog2 pProgressorDialog = null; //if we're in an edit session then grab the target fabric if (pEd.EditState == esriEditState.esriStateEditing) { pCadFabric = pCadEd.CadastralFabric; } if (pCadFabric == null) {//find the first fabric in the map if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric)) { MessageBox.Show ("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again."); return; } } IArray CFParcelLayers = new ArrayClass(); if (!(FabricUTILS.GetFabricSubLayersFromFabric(pMap, pCadFabric, out CFPointLayer, out CFLineLayer, out CFParcelLayers, out CFControlLayer, out CFLinePointLayer))) { return; //no fabric sublayers available for the targeted fabric } bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false; IWorkspace pWS = null; ICadastralFabricLayer pCFLayer = null; ITable pParcelsTable = null; ITable pLinesTable = null; ITable pLinePtsTable = null; ITable pPointsTable = null; ITable pControlTable = null; try { //Get the selection of parcels IFeatureLayer pFL = (IFeatureLayer)CFParcelLayers.get_Element(0); IDataset pDS = (IDataset)pFL.FeatureClass; pWS = pDS.Workspace; if (!FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB, out bIsUnVersioned, out bUseNonVersionedDelete)) { return; } if (bUseNonVersionedDelete) { pCFLayer = new CadastralFabricLayerClass(); pCFLayer.CadastralFabric = pCadFabric; pCadEd.CadastralFabricLayer = pCFLayer;//NOTE: Need to set this back to NULL when done. } ICadastralSelection pCadaSel = (ICadastralSelection)pCadEd; IEnumGSParcels pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround IFeatureSelection pFeatSel = (IFeatureSelection)pFL; ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet; bMoreThan995UnjoinedParcels = (pSelSet.Count > pCadaSel.SelectedParcelCount); //used for bug workaround if (pCadaSel.SelectedParcelCount == 0 && pSelSet.Count == 0) { MessageBox.Show("Please select some fabric parcels and try again.", "No Selection", MessageBoxButtons.OK, MessageBoxIcon.Information); pMouseCursor.SetCursor(0); if (bUseNonVersionedDelete) { pCadEd.CadastralFabricLayer = null; CFParcelLayers = null; CFPointLayer = null; CFLineLayer = null; CFControlLayer = null; CFLinePointLayer = null; } return; } if (bMoreThan995UnjoinedParcels) { m_bShowProgressor = (pSelSet.Count > 10); } else { m_bShowProgressor = (pCadaSel.SelectedParcelCount > 10); } if (m_bShowProgressor) { m_pProgressorDialogFact = new ProgressDialogFactoryClass(); m_pTrackCancel = new CancelTrackerClass(); m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd); pProgressorDialog = (IProgressDialog2)m_pStepProgressor; m_pStepProgressor.MinRange = 1; if (bMoreThan995UnjoinedParcels) { m_pStepProgressor.MaxRange = pSelSet.Count * 18; //(estimate 7 lines per parcel, 4 pts per parcel, 3 line points per parcel, and there is a second loop on parcel list) } else { m_pStepProgressor.MaxRange = pCadaSel.SelectedParcelCount * 18; //(estimate 7 lines per parcel, 4 pts per parcel, 3 line points per parcel, and there is a second loop on parcel list) } m_pStepProgressor.StepValue = 1; pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral; } m_pQF = new QueryFilterClass(); string sPref; string sSuff; ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS; sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix); sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix); //====== need to do this for all the parcel sublayers in the map that are part of the target fabric if (m_bShowProgressor) { pProgressorDialog.ShowDialog(); m_pStepProgressor.Message = "Collecting parcel data..."; } //Add the OIDs of all the selected parcels into a new feature IDSet string[] sOIDList = { "(" }; int tokenLimit = 995; bool bCont = true; int j = 0; int iCounter = 0; m_pFIDSetParcels = new FIDSetClass(); //===================== start bug workaraound for 10.0 client =================== if (bMoreThan995UnjoinedParcels) { ICursor pCursor = null; pSelSet.Search(null, false, out pCursor);//code deletes all selected parcels IFeatureCursor pParcelFeatCurs = (IFeatureCursor)pCursor; IFeature pParcFeat = pParcelFeatCurs.NextFeature(); while (pParcFeat != null) { //Check if the cancel button was pressed. If so, stop process if (m_bShowProgressor) { bCont = m_pTrackCancel.Continue(); if (!bCont) { break; } } bool bExists = false; m_pFIDSetParcels.Find(pParcFeat.OID, out bExists); if (!bExists) { m_pFIDSetParcels.Add(pParcFeat.OID); if (iCounter <= tokenLimit) { sOIDList[j] = sOIDList[j] + Convert.ToString(pParcFeat.OID) + ","; iCounter++; } else {//maximum tokens reached sOIDList[j] = sOIDList[j].Trim(); iCounter = 0; //set up the next OIDList j++; FabricUTILS.RedimPreserveString(ref sOIDList, 1); sOIDList[j] = "("; sOIDList[j] = sOIDList[j] + Convert.ToString(pParcFeat.OID) + ","; } } Marshal.ReleaseComObject(pParcFeat); //garbage collection pParcFeat = pParcelFeatCurs.NextFeature(); if (m_bShowProgressor) { if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange) { m_pStepProgressor.Step(); } } } Marshal.ReleaseComObject(pCursor); //garbage collection //===================== end bug workaraound for 10.0 client =================== } else //===the following code path is preferred====== { pEnumGSParcels.Reset(); IGSParcel pGSParcel = pEnumGSParcels.Next(); while (pGSParcel != null) { //Check if the cancel button was pressed. If so, stop process if (m_bShowProgressor) { bCont = m_pTrackCancel.Continue(); if (!bCont) { break; } } m_pFIDSetParcels.Add(pGSParcel.DatabaseId); if (iCounter <= tokenLimit) { sOIDList[j] = sOIDList[j] + Convert.ToString(pGSParcel.DatabaseId) + ","; iCounter++; } else {//maximum tokens reached sOIDList[j] = sOIDList[j].Trim(); iCounter = 0; //set up the next OIDList j++; FabricUTILS.RedimPreserveString(ref sOIDList, 1); sOIDList[j] = "("; sOIDList[j] = sOIDList[j] + Convert.ToString(pGSParcel.DatabaseId) + ","; } Marshal.ReleaseComObject(pGSParcel); //garbage collection pGSParcel = pEnumGSParcels.Next(); if (m_bShowProgressor) { if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange) { m_pStepProgressor.Step(); } } } Marshal.ReleaseComObject(pEnumGSParcels); //garbage collection } if (!bCont) { AbortEdits(bUseNonVersionedDelete, pEd, pWS); return; } string sTime = ""; if (!bIsUnVersioned && !bIsFileBasedGDB) { //see if parcel locks can be obtained on the selected parcels. First create a job. DateTime localNow = DateTime.Now; sTime = Convert.ToString(localNow); ICadastralJob pJob = new CadastralJobClass(); pJob.Name = sTime; pJob.Owner = System.Windows.Forms.SystemInformation.UserName; pJob.Description = "Delete selected parcels"; try { Int32 jobId = pCadFabric.CreateJob(pJob); } catch (COMException ex) { if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS) { MessageBox.Show("Job named: '" + pJob.Name + "', already exists"); } else { MessageBox.Show(ex.Message); } return; } } //if we're in an enterprise then test for edit locks ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric; if (!bIsUnVersioned && !bIsFileBasedGDB) { pFabLocks.LockingJob = sTime; ILongArray pLocksInConflict = null; ILongArray pSoftLcksInConflict = null; ILongArray pParcelsToLock = new LongArrayClass(); FabricUTILS.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, m_pStepProgressor); if (m_bShowProgressor && !bIsFileBasedGDB) { m_pStepProgressor.Message = "Testing for edit locks on parcels..."; } try { pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict); } catch (COMException pCOMEx) { if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS || pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED) { MessageBox.Show("Edit Locks could not be acquired on all selected parcels."); // since the operation is being aborted, release any locks that were acquired pFabLocks.UndoLastAcquiredLocks(); } else { MessageBox.Show(pCOMEx.Message + Environment.NewLine + Convert.ToString(pCOMEx.ErrorCode)); } return; } } //Build an IDSet of lines for the parcel to be deleted, and build an IDSet of the points for those lines m_pFIDSetLines = new FIDSetClass(); m_pFIDSetPoints = new FIDSetClass(); if (pEd.EditState == esriEditState.esriStateEditing) { try { pEd.StartOperation(); } catch { pEd.AbortOperation();//abort any open edit operations and try again pEd.StartOperation(); } } if (bUseNonVersionedDelete) { if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned)) { return; } } //first delete all the parcel records if (m_bShowProgressor) { m_pStepProgressor.Message = "Deleting parcels..."; } bool bSuccess = true; pParcelsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); pLinesTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines); pLinePtsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints); pPointsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints); pControlTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTControl); if (!bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsByFIDSet(pParcelsTable, m_pFIDSetParcels, m_pStepProgressor, m_pTrackCancel); } if (bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pParcelsTable, m_pFIDSetParcels, m_pStepProgressor, m_pTrackCancel); } if (!bSuccess) { if (!bIsUnVersioned) { pFabLocks.UndoLastAcquiredLocks(); } AbortEdits(bUseNonVersionedDelete, pEd, pWS); if (!bIsUnVersioned) { //check version and if the Cancel button was not clicked and we're higher than //version 10.0, then re-try the delete with the core delete command string sVersion = Application.ProductVersion; int iErrCode = FabricUTILS.LastErrorCode; if (!sVersion.StartsWith("10.0") && iErrCode == -2147217400) { FabricUTILS.ExecuteCommand("{B0A62C1C-7FAE-457A-AB25-A966B7254EF6}"); } } return; } //next need to use an in clause for lines, so ... string[] sPointOIDList = { "" }; int iCnt = 0; int iTokenCnt = 0; int iStepCnt = 1; //...for each item in the sOIDList array foreach (string inClause in sOIDList) { ICursor pLineCurs = FabricUTILS.GetCursorFromCommaSeparatedOIDList(pLinesTable, inClause, "PARCELID"); IRow pRow = pLineCurs.NextRow(); Int32 iFromPt = pLinesTable.Fields.FindField("FROMPOINTID"); Int32 iToPt = pLinesTable.Fields.FindField("TOPOINTID"); while (pRow != null) { if (iTokenCnt >= tokenLimit) { FabricUTILS.RedimPreserveString(ref sPointOIDList, 1); iTokenCnt = 0; iCnt++; } m_pFIDSetLines.Add(pRow.OID); Int32 i = (Int32)pRow.get_Value(iFromPt); if (i > -1) { bool bExists = false; m_pFIDSetPoints.Find(i, out bExists); if (!bExists) { m_pFIDSetPoints.Add(i); sPointOIDList[iCnt] = sPointOIDList[iCnt] + Convert.ToString(i) + ","; iTokenCnt++; } } i = (Int32)pRow.get_Value(iToPt); if (i > -1) { bool bExists = false; m_pFIDSetPoints.Find(i, out bExists); if (!bExists) { m_pFIDSetPoints.Add(i); sPointOIDList[iCnt] = sPointOIDList[iCnt] + Convert.ToString(i) + ","; iTokenCnt++; } } Marshal.ReleaseComObject(pRow); //garbage collection pRow = pLineCurs.NextRow(); } Marshal.ReleaseComObject(pLineCurs); //garbage collection //delete line records based on the selected parcels string sMessage = "Deleting lines..."; int iSetCnt = sOIDList.GetLength(0); if (iSetCnt > 1) { sMessage += "Step " + Convert.ToString(iStepCnt) + " of " + Convert.ToString(iSetCnt); } if (m_bShowProgressor) { m_pStepProgressor.Message = sMessage; } if (!bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsByFIDSet(pLinesTable, m_pFIDSetLines, m_pStepProgressor, m_pTrackCancel); } if (bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pLinesTable, m_pFIDSetLines, m_pStepProgressor, m_pTrackCancel); } if (!bSuccess) { if (!bIsUnVersioned) { pFabLocks.UndoLastAcquiredLocks(); } AbortEdits(bUseNonVersionedDelete, pEd, pWS); return; } //delete the line points for the deleted parcels //build the list of the line points that need to be deleted. //IFeatureClass pFeatCLLinePoints = CFLinePointLayer.FeatureClass; string NewInClause = ""; //remove trailing comma if ((inClause.Substring(inClause.Length - 1, 1)) == ",") { NewInClause = inClause.Substring(0, inClause.Length - 1); } //m_pQF.WhereClause = (sPref + "parcelid" + sSuff).Trim() + " IN " + NewInClause + ")"; m_pQF.WhereClause = "PARCELID IN " + NewInClause + ")"; ICursor pLinePointCurs = pLinePtsTable.Search(m_pQF, false); IRow pLinePointFeat = pLinePointCurs.NextRow(); //Build an IDSet of linepoints for parcels to be deleted IFIDSet pFIDSetLinePoints = new FIDSetClass(); while (pLinePointFeat != null) { pFIDSetLinePoints.Add(pLinePointFeat.OID); Marshal.ReleaseComObject(pLinePointFeat); //garbage collection pLinePointFeat = pLinePointCurs.NextRow(); } //===========deletes linepoints associated with parcels iSetCnt = sOIDList.GetLength(0); sMessage = "Deleting line-points..."; if (iSetCnt > 1) { sMessage += "Step " + Convert.ToString(iStepCnt) + " of " + Convert.ToString(iSetCnt); } if (m_bShowProgressor) { m_pStepProgressor.Message = sMessage; } if (!bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsByFIDSet(pLinePtsTable, pFIDSetLinePoints, m_pStepProgressor, m_pTrackCancel); } if (bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pLinePtsTable, pFIDSetLinePoints, m_pStepProgressor, m_pTrackCancel); } if (!bSuccess) { if (!bIsUnVersioned) { pFabLocks.UndoLastAcquiredLocks(); } AbortEdits(bUseNonVersionedDelete, pEd, pWS); if (pLinePointCurs != null) { Marshal.ReleaseComObject(pLinePointCurs); //garbage } return; } ///////============================================== Marshal.ReleaseComObject(pLinePointCurs); //garbage iStepCnt++; } //now need to get points that should not be deleted, because they are used by lines that are not deleted. //first search for the remaining lines. Any that have from/to points that are in the point fidset are the points //that should stay IFIDSet pFIDSetNullGeomLinePtFrom = new FIDSetClass(); IFIDSet pFIDSetNullGeomLinePtTo = new FIDSetClass(); if (m_bShowProgressor) { m_pStepProgressor.Message = "Updating point delete list..."; } for (int z = 0; z <= iCnt; z++) { //remove trailing comma if ((sPointOIDList[z].Trim() == "")) { break; } if ((sPointOIDList[z].Substring(sPointOIDList[z].Length - 1, 1)) == ",") { sPointOIDList[z] = sPointOIDList[z].Substring(0, sPointOIDList[z].Length - 1); } } //string TheWhereClause = "(" + (sPref + "frompointid" + sSuff).Trim() + " IN ("; //UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "frompointid", // TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtFrom); //TheWhereClause = "(" + (sPref + "topointid" + sSuff).Trim() + " IN ("; //UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "topointid", // TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtTo); string TheWhereClause = "(FROMPOINTID IN ("; UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "FROMPOINTID", TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtFrom); TheWhereClause = "(TOPOINTID IN ("; UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "TOPOINTID", TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtTo); if (m_bShowProgressor) { m_pStepProgressor.Message = "Deleting points..."; } if (!bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsByFIDSet(pPointsTable, m_pFIDSetPoints, m_pStepProgressor, m_pTrackCancel); } if (bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pPointsTable, m_pFIDSetPoints, m_pStepProgressor, m_pTrackCancel); } if (!bSuccess) { if (!bIsUnVersioned) { pFabLocks.UndoLastAcquiredLocks(); } AbortEdits(bUseNonVersionedDelete, pEd, pWS); return; } //====Phase 2 of line-point delete. Remove the Line-points that no longer have underlying points. if (m_bShowProgressor) { m_pStepProgressor.Message = "Deleting line-points..."; } for (int z = 0; z <= iCnt; z++) { if ((sPointOIDList[z].Trim() == "")) { continue; } //remove line points where underlying points were deleted bSuccess = FabricUTILS.DeleteByQuery(pWS, pLinePtsTable, pLinePtsTable.Fields.get_Field(pLinePtsTable.FindField("LinePointID")), sPointOIDList, !bIsUnVersioned, m_pStepProgressor, m_pTrackCancel); if (!bSuccess) { if (!bIsUnVersioned) { pFabLocks.UndoLastAcquiredLocks(); } AbortEdits(bUseNonVersionedDelete, pEd, pWS); return; } } //===== //Empty geometry on points that are floating points on unjoined parcels m_pEmptyGeoms = new FIDSetClass(); FabricUTILS.IntersectFIDSetCommonIDs(pFIDSetNullGeomLinePtTo, pFIDSetNullGeomLinePtFrom, out m_pEmptyGeoms); ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric; pSchemaEd.ReleaseReadOnlyFields(pPointsTable, esriCadastralFabricTable.esriCFTPoints); //release safety-catch if (!bUseNonVersionedDelete) { FabricUTILS.EmptyGeometries((IFeatureClass)pPointsTable, m_pEmptyGeoms); } else { FabricUTILS.EmptyGeometriesUnversioned(pWS, CFPointLayer.FeatureClass, m_pEmptyGeoms); } pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);//set safety back on if (m_bShowProgressor) { m_pStepProgressor.Message = "Resetting control point associations..."; } for (int z = 0; z <= iCnt; z++) { if ((sPointOIDList[z].Trim() == "")) { break; } //cleanup associated control points, and associations where underlying points were deleted //m_pQF.WhereClause = (sPref + "pointid" + sSuff).Trim() + " IN (" + sPointOIDList[z] + ")"; m_pQF.WhereClause = "POINTID IN (" + sPointOIDList[z] + ")"; pSchemaEd.ReleaseReadOnlyFields(pControlTable, esriCadastralFabricTable.esriCFTControl); //release safety-catch if (!FabricUTILS.ResetControlAssociations(pControlTable, m_pQF, bUseNonVersionedDelete)) { pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on } } pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on if (bUseNonVersionedDelete) { FabricUTILS.StopEditing(pWS); } if (pEd.EditState == esriEditState.esriStateEditing) { pEd.StopOperation("Delete parcels"); } //clear selection, to make sure the parcel explorer is updated and refreshed properly if (pFeatSel != null && bMoreThan995UnjoinedParcels) { pFeatSel.Clear(); } } catch (Exception ex) { if (bUseNonVersionedDelete) { FabricUTILS.AbortEditing(pWS); } if (pEd != null) { if (pEd.EditState == esriEditState.esriStateEditing) { pEd.AbortOperation(); } } MessageBox.Show(ex.Message); return; } finally { RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer); //update the TOC IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document); for (int i = 0; i < mxDocument.ContentsViewCount; i++) { IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i); pCV.Refresh(null); } if (pMouseCursor != null) { pMouseCursor.SetCursor(0); } m_pStepProgressor = null; if (!(pProgressorDialog == null)) { pProgressorDialog.HideDialog(); } pProgressorDialog = null; if (bUseNonVersionedDelete) { pCadEd.CadastralFabricLayer = null; CFParcelLayers = null; CFPointLayer = null; CFLineLayer = null; CFControlLayer = null; CFLinePointLayer = null; } } }
public void GetFabricPlatform(IWorkspace TheWorkspace, ICadastralFabric TheFabric, out bool IsFileBasedGDB, out bool IsUnVersioned) { IsFileBasedGDB = false; IsUnVersioned = false; ITable pTable = TheFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); IsFileBasedGDB = (!(TheWorkspace.WorkspaceFactory.WorkspaceType == esriWorkspaceType.esriRemoteDatabaseWorkspace)); if (!(IsFileBasedGDB)) { IVersionedObject pVersObj = (IVersionedObject)pTable; IsUnVersioned = (!(pVersObj.IsRegisteredAsVersioned)); pTable = null; pVersObj = null; } }
bool FindEmptyPlans(ICadastralFabric Fabric, IStepProgressor StepProgressor, ITrackCancel TrackCancel, out IFIDSet EmptyPlans) { ICursor pPlansCur = null; ICursor pParcelCur = null; IFIDSet pEmptyPlansFIDSet = new FIDSetClass(); List<int> pNonEmptyPlansList = new List<int>(); IDataset pDS=(IDataset)Fabric; IWorkspace pWS = pDS.Workspace; ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS; string sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix); string sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix); try { ITable pPlansTable = Fabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans); ITable pParcelsTable = Fabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); ////build a list of ids for all the plans found via parcels //if a Personal GDB then don't try to use DISTINCT if (pWS.Type == esriWorkspaceType.esriLocalDatabaseWorkspace && pWS.PathName.ToLower().EndsWith(".mdb")) { pParcelCur = pParcelsTable.Search(null, false); } else { IQueryFilter pQuF = new QueryFilterClass(); pQuF.SubFields = "PLANID"; IQueryFilterDefinition2 queryFilterDef = (IQueryFilterDefinition2)pQuF; queryFilterDef.PrefixClause = "DISTINCT PLANID"; pParcelCur = pParcelsTable.Search(pQuF, true); //Recycling set to true } Int32 iPlanIDX = pParcelCur.Fields.FindField("PLANID"); IRow pParcRow = pParcelCur.NextRow(); while (pParcRow != null) { //Create a collection of planIDs from Parcels table that we know are not empty Int32 iPlanID = -1; object Attr_val = pParcRow.get_Value(iPlanIDX); if (Attr_val != DBNull.Value) { iPlanID = (Int32)Attr_val; if (iPlanID > -1) { if (!pNonEmptyPlansList.Contains(iPlanID)) pNonEmptyPlansList.Add(iPlanID); } } Marshal.ReleaseComObject(pParcRow); pParcRow = pParcelCur.NextRow(); } if (pParcelCur != null) Marshal.FinalReleaseComObject(pParcelCur); pPlansCur = pPlansTable.Search(null, false); IRow pPlanRow = pPlansCur.NextRow(); while (pPlanRow != null) { bool bFound = false; bFound = pNonEmptyPlansList.Contains(pPlanRow.OID); if (!bFound) //This plan was not found in our parcel-referenced plans { //check if this is the default map plan, so it can be excluded from deletion Int32 iPlanNameIDX = pPlanRow.Fields.FindField("NAME"); string sPlanName = (string)pPlanRow.get_Value(iPlanNameIDX); if (sPlanName.ToUpper() != "<MAP>") pEmptyPlansFIDSet.Add(pPlanRow.OID); } Marshal.ReleaseComObject(pPlanRow); pPlanRow = pPlansCur.NextRow(); } EmptyPlans = pEmptyPlansFIDSet; return true; } catch (Exception ex) { MessageBox.Show(Convert.ToString(ex.Message), "Find Empty Plans"); EmptyPlans = null; return false; } finally { if (pParcelCur != null) { do { } while (Marshal.ReleaseComObject(pParcelCur) > 0); } if (pNonEmptyPlansList != null) { pNonEmptyPlansList.Clear(); pNonEmptyPlansList = null; } if (pParcelCur != null) { do { } while (Marshal.ReleaseComObject(pParcelCur) > 0); } } }
void AddEmptyPlansToList(ICadastralFabric Fabric, IFIDSet EmptyPlansFIDSet, dlgEmptyPlansList EmptyPlansList) { ITable pPlansTable = Fabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans); CheckedListBox list = EmptyPlansList.checkedListBox1; IArray array = new ArrayClass(); for (int idx = 0; idx <= (EmptyPlansFIDSet.Count() - 1); idx++) { // Add the name of the plan to the list Int32 i_x; Int32 iPlanName; iPlanName = pPlansTable.FindField("NAME"); EmptyPlansFIDSet.Next(out i_x); array.Add(i_x); string sPlanName = (string)pPlansTable.GetRow(i_x).get_Value(iPlanName); list.Items.Add(sPlanName, true); } // Bind array of plan ids with the list list.Tag = (object)array; if(list.Items.Count>0) EmptyPlansList.checkedListBox1_SelectedValueChanged(null, null); }
public bool SetupEditEnvironment(IWorkspace TheWorkspace, ICadastralFabric TheFabric, IEditor TheEditor, out bool IsFileBasedGDB, out bool IsUnVersioned, out bool UseNonVersionedEdit) { IsFileBasedGDB = false; IsUnVersioned = false; UseNonVersionedEdit = false; ITable pTable = TheFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); IsFileBasedGDB = (!(TheWorkspace.WorkspaceFactory.WorkspaceType == esriWorkspaceType.esriRemoteDatabaseWorkspace)); if (!(IsFileBasedGDB)) { IVersionedObject pVersObj = (IVersionedObject)pTable; IsUnVersioned = (!(pVersObj.IsRegisteredAsVersioned)); pTable = null; pVersObj = null; } if (IsUnVersioned && !IsFileBasedGDB) {// DialogResult dlgRes = messageBox.Show("Fabric is not registered as versioned." + "\r\n You will not be able to undo." + "\r\n Click 'OK' to delete permanently.", "Continue with delete?", MessageBoxButtons.OKCancel); if (dlgRes == DialogResult.OK) { UseNonVersionedEdit = true; } else if (dlgRes == DialogResult.Cancel) { return false; } //MessageBox.Show("The fabric tables are non-versioned." + // "\r\n Please register as versioned, and try again."); //return false; } else if (TheEditor != null && TheEditor.EditState == esriEditState.esriStateNotEditing) { messageBox.Show("Please start editing first and try again.", "Delete", MessageBoxButtons.OK); return false; } return true; }
protected override void OnClick() { #region Prepare for editing IMouseCursor pMouseCursor = new MouseCursorClass(); pMouseCursor.SetCursor(2); UID pUID = new UIDClass(); pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}"; ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID); ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID); //check if there is a Manual Mode "modify" job active =========== ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan; if (pCadPacMan.PacketOpen) { MessageBox.Show("This command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.", "Delete Selected Parcels"); return; } IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor"); IActiveView pActiveView = ArcMap.Document.ActiveView; IMap pMap = pActiveView.FocusMap; ICadastralFabric pCadFabric = null; clsFabricUtils FabricUTILS = new clsFabricUtils(); IProgressDialog2 pProgressorDialog = null; //if we're in an edit session then grab the target fabric if (pEd.EditState == esriEditState.esriStateEditing) { pCadFabric = pCadEd.CadastralFabric; } else { MessageBox.Show("Please start editing and try again."); return; } if (pCadFabric == null) {//find the first fabric in the map if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric)) { MessageBox.Show ("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again."); return; } } IArray CFParcelLayers = new ArrayClass(); if (!(FabricUTILS.GetFabricSubLayersFromFabric(pMap, pCadFabric, out CFPointLayer, out CFLineLayer, out CFParcelLayers, out CFControlLayer, out CFLinePointLayer))) { return; //no fabric sublayers available for the targeted fabric } //bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false; //ICadastralFabricLayer pCFLayer = null; IWorkspace pWS = null; ITable pParcelsTable = null; ITable pLinesTable = null; ITable pLinePtsTable = null; ITable pPointsTable = null; pParcelsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); pLinesTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines); pLinePtsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints); pPointsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints); #endregion dlgChangeParcelHistory pChangeHistoryDialog = new dlgChangeParcelHistory(); // ******** Display the dialog ********* DialogResult pDialogResult = pChangeHistoryDialog.ShowDialog(); if (pDialogResult != DialogResult.OK) { return; } //************************ #region Get Selection //Get the selection of parcels IFeatureLayer pFL = (IFeatureLayer)CFParcelLayers.get_Element(0); IDataset pDS = (IDataset)pFL.FeatureClass; pWS = pDS.Workspace; ICadastralSelection pCadaSel = (ICadastralSelection)pCadEd; IEnumGSParcels pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround IFeatureSelection pFeatSel = (IFeatureSelection)pFL; ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet; ICadastralFabricSchemaEdit2 pSchemaEd = null; try { int iParcelCount = pCadaSel.SelectedParcelCount; bool m_bShowProgressor = (iParcelCount > 10); if (m_bShowProgressor) { m_pProgressorDialogFact = new ProgressDialogFactoryClass(); m_pTrackCancel = new CancelTrackerClass(); m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd); pProgressorDialog = (IProgressDialog2)m_pStepProgressor; m_pStepProgressor.MinRange = 1; m_pStepProgressor.MaxRange = iParcelCount * 14; //(estimate 7 lines per parcel, 4 pts per parcel) m_pStepProgressor.StepValue = 1; pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral; } if (m_bShowProgressor) { pProgressorDialog.ShowDialog(); m_pStepProgressor.Message = "Initializing..."; } #endregion #region Get Parcel History Fields //Get the parcel table history fields //SystemStart, SystemEnd, LegalStart, LegalEnd, Historic int iParcSysStartDate = pParcelsTable.FindField("systemstartdate"); int iParcSysEndDate = pParcelsTable.FindField("systemenddate"); int iParcLegalStartDate = pParcelsTable.FindField("legalstartdate"); int iParcLegalEndDate = pParcelsTable.FindField("legalenddate"); int iParcHistorical = pParcelsTable.FindField("historical"); //Add the OIDs of all the selected parcels into a new feature IDSet //Need a Lookup for the History information Dictionary <int, string> ParcelToHistory_DICT = new Dictionary <int, string>(); List <string> sOIDList = new List <string>(); sOIDList.Add(""); int tokenLimit = 995; bool bCont = true; int j = 0; int iCounter = 0; m_pFIDSetParcels = new FIDSetClass(); pEnumGSParcels.Reset(); IGSParcel pGSParcel = pEnumGSParcels.Next(); while (pGSParcel != null) { //Check if the cancel button was pressed. If so, stop process if (m_bShowProgressor) { bCont = m_pTrackCancel.Continue(); if (!bCont) { break; } } m_pFIDSetParcels.Add(pGSParcel.DatabaseId); if (iCounter <= tokenLimit) { if (sOIDList[j].Trim() == "") { sOIDList[j] = Convert.ToString(pGSParcel.DatabaseId); } else { sOIDList[j] = sOIDList[j] + "," + Convert.ToString(pGSParcel.DatabaseId); } iCounter++; } else {//maximum tokens reached iCounter = 0; //set up the next OIDList j++; sOIDList.Add(""); sOIDList[j] = Convert.ToString(pGSParcel.DatabaseId); } //add to the lookup IGSAttributes pGSParcelAttributes = (IGSAttributes)pGSParcel; object pObj = pGSParcelAttributes.GetProperty("systemstartdate"); string sSystemStartParcel = ""; if (pObj != null) { sSystemStartParcel = pObj.ToString(); } pObj = pGSParcelAttributes.GetProperty("systemenddate"); string sSystemEndParcel = ""; if (pObj != null) { sSystemEndParcel = pObj.ToString(); } string sLegalStartParcel = pGSParcel.LegalStartDate.ToString(); string sLegalEndParcel = pGSParcel.LegalEndDate.ToString(); string sHistorical = pGSParcel.Historical.ToString(); ParcelToHistory_DICT.Add(pGSParcel.DatabaseId, sSystemStartParcel + "," + sSystemEndParcel + "," + sLegalStartParcel + "," + sLegalEndParcel + "," + sHistorical); Marshal.ReleaseComObject(pGSParcel); //garbage collection pGSParcel = pEnumGSParcels.Next(); if (m_bShowProgressor) { if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange) { m_pStepProgressor.Step(); } } } Marshal.ReleaseComObject(pEnumGSParcels); //garbage collection #endregion #region Confirm Edit Locks bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersioned = false; if (!FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB, out bIsUnVersioned, out bUseNonVersioned)) { return; } //if we're in an enterprise then test for edit locks string sTime = ""; if (!bIsUnVersioned && !bIsFileBasedGDB) { //see if parcel locks can be obtained on the selected parcels. First create a job. DateTime localNow = DateTime.Now; sTime = Convert.ToString(localNow); ICadastralJob pJob = new CadastralJobClass(); pJob.Name = sTime; pJob.Owner = System.Windows.Forms.SystemInformation.UserName; pJob.Description = "Delete selected parcels"; try { Int32 jobId = pCadFabric.CreateJob(pJob); } catch (COMException ex) { if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS) { MessageBox.Show("Job named: '" + pJob.Name + "', already exists"); } else { MessageBox.Show(ex.Message); } m_pStepProgressor = null; if (!(pProgressorDialog == null)) { pProgressorDialog.HideDialog(); } pProgressorDialog = null; Marshal.ReleaseComObject(pJob); if (bUseNonVersioned) { pCadEd.CadastralFabricLayer = null; } return; } Marshal.ReleaseComObject(pJob); } ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric; if (!bIsUnVersioned && !bIsFileBasedGDB) { pFabLocks.LockingJob = sTime; ILongArray pLocksInConflict = null; ILongArray pSoftLcksInConflict = null; ILongArray pParcelsToLock = new LongArrayClass(); FabricUTILS.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, m_pStepProgressor); if (m_bShowProgressor && !bIsFileBasedGDB) { m_pStepProgressor.Message = "Testing for edit locks on parcels..."; } try { pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict); } catch (COMException pCOMEx) { if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS || pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED) { MessageBox.Show("Edit Locks could not be acquired on all selected parcels."); // since the operation is being aborted, release any locks that were acquired pFabLocks.UndoLastAcquiredLocks(); } else { MessageBox.Show(pCOMEx.Message + Environment.NewLine + Convert.ToString(pCOMEx.ErrorCode)); } if (bUseNonVersioned) { pCadEd.CadastralFabricLayer = null; } return; } Marshal.ReleaseComObject(pSoftLcksInConflict); Marshal.ReleaseComObject(pParcelsToLock); Marshal.ReleaseComObject(pLocksInConflict); } #endregion string sParcelSysEndDate = pParcelsTable.Fields.get_Field(iParcSysEndDate).Name; string sParcelLegalStartDate = pParcelsTable.Fields.get_Field(iParcLegalStartDate).Name; string sParcelLegalEndDate = pParcelsTable.Fields.get_Field(iParcLegalEndDate).Name; string sParcelHistoric = pParcelsTable.Fields.get_Field(iParcHistorical).Name; if (m_bShowProgressor) { pProgressorDialog.ShowDialog(); m_pStepProgressor.Message = "Updating parcel history..."; } pEd.StartOperation(); #region The Edit //make change to parcels bool bSuccess = false; ICursor pCurs = null; IQueryFilter pQuFilter = new QueryFilterClass(); pQuFilter.SubFields = pParcelsTable.OIDFieldName + "," + sParcelLegalEndDate + "," + sParcelLegalStartDate + "," + sParcelSysEndDate + "," + sParcelHistoric; bool bSystemEndDate_Clear = pChangeHistoryDialog.chkSystemEndDate.Checked && pChangeHistoryDialog.optClearSEDate.Checked; bool bLegalStDate_Clear = pChangeHistoryDialog.chkLegalStartDate.Checked && pChangeHistoryDialog.optClearLSDate.Checked; bool bLegalEndDate_Clear = pChangeHistoryDialog.chkLegalEndDate.Checked && pChangeHistoryDialog.optClearLEDate.Checked; bool bSystemEndDate_Set = pChangeHistoryDialog.chkSystemEndDate.Checked && pChangeHistoryDialog.optChooseSEDate.Checked; bool bLegalStDate_Set = pChangeHistoryDialog.chkLegalStartDate.Checked && pChangeHistoryDialog.optChooseLSDate.Checked; bool bLegalEndDate_Set = pChangeHistoryDialog.chkLegalEndDate.Checked && pChangeHistoryDialog.optChooseLEDate.Checked; List <bool> bHistory = new List <bool>(); bHistory.Add(bSystemEndDate_Clear); bHistory.Add(bLegalStDate_Clear); bHistory.Add(bLegalEndDate_Clear); bHistory.Add(bSystemEndDate_Set); bHistory.Add(bLegalStDate_Set); bHistory.Add(bLegalEndDate_Set); List <string> sDates = new List <string>(); sDates.Add(pChangeHistoryDialog.dtSEDatePicker.Text); sDates.Add(pChangeHistoryDialog.dtLSDatePicker.Text); sDates.Add(pChangeHistoryDialog.dtLEDatePicker.Text); pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric; pSchemaEd.ReleaseReadOnlyFields(pLinesTable, esriCadastralFabricTable.esriCFTLines); //release safety-catch pSchemaEd.ReleaseReadOnlyFields(pParcelsTable, esriCadastralFabricTable.esriCFTParcels); //release safety-catch pSchemaEd.ReleaseReadOnlyFields(pPointsTable, esriCadastralFabricTable.esriCFTPoints); //release safety-catch foreach (string sInClause in sOIDList) { if (sInClause.Trim() == "") { continue; } pQuFilter.WhereClause = pParcelsTable.OIDFieldName + " IN (" + sInClause + ")"; pCurs = pParcelsTable.Update(pQuFilter, false); bSuccess = FabricUTILS.ChangeDatesOnTableMulti(pCurs, bHistory, sDates, bUseNonVersioned, ParcelToHistory_DICT, m_pStepProgressor, m_pTrackCancel); if (!bSuccess) { if (!bIsUnVersioned) { pFabLocks.UndoLastAcquiredLocks(); } if (bUseNonVersioned) { FabricUTILS.AbortEditing(pWS); } else { pEd.AbortOperation(); } //clear selection, to make sure the parcel explorer is updated and refreshed properly return; } } //make change to points and lines if (!FabricUTILS.UpdateHistoryOnLines(pLinesTable, pPointsTable, iParcelCount, pCadFabric, sOIDList, ParcelToHistory_DICT, m_pStepProgressor, m_pTrackCancel)) { if (!bIsUnVersioned) { pFabLocks.UndoLastAcquiredLocks(); } if (bUseNonVersioned) { FabricUTILS.AbortEditing(pWS); } else { pEd.AbortOperation(); } } else { pEd.StopOperation("Change Parcel History"); } #endregion //now refresh the map layers RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer); } catch (Exception ex) { pEd.AbortOperation(); MessageBox.Show("Error:" + ex.Message); } finally { if (!(pProgressorDialog == null)) { pProgressorDialog.HideDialog(); } pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints); //set safety back on pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTLines); //set safety back on pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels); //set safety back on } }
protected override void OnClick() { bool bShowProgressor = false; IStepProgressor pStepProgressor = null; //Create a CancelTracker. ITrackCancel pTrackCancel = null; IProgressDialogFactory pProgressorDialogFact; IMouseCursor pMouseCursor = new MouseCursorClass(); pMouseCursor.SetCursor(2); //first get the selected parcel features UID pUID = new UIDClass(); pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}"; ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID); ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID); //check if there is a Manual Mode "modify" job active =========== ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan; if (pCadPacMan.PacketOpen) { MessageBox.Show("The Delete linepoint command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.", "Delete Selected LinePoints"); return; } IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor"); IActiveView pActiveView = ArcMap.Document.ActiveView; IMap pMap = pActiveView.FocusMap; ICadastralFabric pCadFabric = null; clsFabricUtils FabricUTILS = new clsFabricUtils(); IProgressDialog2 pProgressorDialog = null; //if we're in an edit session then grab the target fabric if (pEd.EditState == esriEditState.esriStateEditing) { pCadFabric = pCadEd.CadastralFabric; } if (pCadFabric == null) {//find the first fabric in the map if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric)) { MessageBox.Show ("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again."); return; } } IArray CFLinePointLayers = new ArrayClass(); if (!(FabricUTILS.GetLinePointLayersFromFabric(pMap, pCadFabric, out CFLinePointLayers))) { return; //no fabric sublayers available for the targeted fabric } bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false; IWorkspace pWS = null; ITable pLinePointTable = null; try { if (pEd.EditState == esriEditState.esriStateEditing) { try { pEd.StartOperation(); } catch { pEd.AbortOperation();//abort any open edit operations and try again pEd.StartOperation(); } } IFeatureLayer pFL = (IFeatureLayer)CFLinePointLayers.get_Element(0); IDataset pDS = (IDataset)pFL.FeatureClass; pWS = pDS.Workspace; if (!FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB, out bIsUnVersioned, out bUseNonVersionedDelete)) { return; } //loop through each linepoint layer and //Get the selection of linepoints int iCnt = 0; int iTotalSelectionCount = 0; for (; iCnt < CFLinePointLayers.Count; iCnt++) { pFL = (IFeatureLayer)CFLinePointLayers.get_Element(iCnt); IFeatureSelection pFeatSel = (IFeatureSelection)pFL; ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet; iTotalSelectionCount += pSelSet.Count; } if (iTotalSelectionCount == 0) { MessageBox.Show("Please select some line points and try again.", "No Selection", MessageBoxButtons.OK, MessageBoxIcon.Information); if (bUseNonVersionedDelete) { pCadEd.CadastralFabricLayer = null; CFLinePointLayers = null; } return; } bShowProgressor = (iTotalSelectionCount > 10); if (bShowProgressor) { pProgressorDialogFact = new ProgressDialogFactoryClass(); pTrackCancel = new CancelTrackerClass(); pStepProgressor = pProgressorDialogFact.Create(pTrackCancel, ArcMap.Application.hWnd); pProgressorDialog = (IProgressDialog2)pStepProgressor; pStepProgressor.MinRange = 1; pStepProgressor.MaxRange = iTotalSelectionCount; pStepProgressor.StepValue = 1; pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral; } //loop through each linepoint layer and //delete from its selection m_pQF = new QueryFilterClass(); iCnt = 0; for (; iCnt < CFLinePointLayers.Count; iCnt++) { pFL = (IFeatureLayer)CFLinePointLayers.get_Element(iCnt); IFeatureSelection pFeatSel = (IFeatureSelection)pFL; ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet; ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS; string sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix); string sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix); if (bShowProgressor) { pProgressorDialog.ShowDialog(); pStepProgressor.Message = "Collecting line point data..."; } //Add the OIDs of all the selected linepoints into a new feature IDSet bool bCont = true; m_pFIDSetLinePoints = new FIDSetClass(); ICursor pCursor = null; pSelSet.Search(null, false, out pCursor);//code deletes all selected line points IFeatureCursor pLinePointFeatCurs = (IFeatureCursor)pCursor; IFeature pLinePointFeat = pLinePointFeatCurs.NextFeature(); while (pLinePointFeat != null) { //Check if the cancel button was pressed. If so, stop process if (bShowProgressor) { bCont = pTrackCancel.Continue(); if (!bCont) { break; } } bool bExists = false; m_pFIDSetLinePoints.Find(pLinePointFeat.OID, out bExists); if (!bExists) { m_pFIDSetLinePoints.Add(pLinePointFeat.OID); } Marshal.ReleaseComObject(pLinePointFeat); //garbage collection pLinePointFeat = pLinePointFeatCurs.NextFeature(); if (bShowProgressor) { if (pStepProgressor.Position < pStepProgressor.MaxRange) { pStepProgressor.Step(); } } } Marshal.ReleaseComObject(pCursor); //garbage collection if (!bCont) { AbortEdits(bUseNonVersionedDelete, pEd, pWS); return; } if (bUseNonVersionedDelete) { if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned)) { if (bUseNonVersionedDelete) { pCadEd.CadastralFabricLayer = null; } return; } } //delete all the line point records if (bShowProgressor) { pStepProgressor.Message = "Deleting selected line points..."; } bool bSuccess = true; pLinePointTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints); if (!bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsByFIDSet(pLinePointTable, m_pFIDSetLinePoints, pStepProgressor, pTrackCancel); } if (bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pLinePointTable, m_pFIDSetLinePoints, pStepProgressor, pTrackCancel); } if (!bSuccess) { AbortEdits(bUseNonVersionedDelete, pEd, pWS); return; } } if (bUseNonVersionedDelete) { FabricUTILS.StopEditing(pWS); } if (pEd.EditState == esriEditState.esriStateEditing) { pEd.StopOperation("Delete Line Points"); } } catch (Exception ex) { MessageBox.Show(ex.Message); return; } finally { RefreshMap(pActiveView, CFLinePointLayers); //update the TOC IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document); for (int i = 0; i < mxDocument.ContentsViewCount; i++) { IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i); pCV.Refresh(null); } if (pProgressorDialog != null) { pProgressorDialog.HideDialog(); } if (bUseNonVersionedDelete) { pCadEd.CadastralFabricLayer = null; CFLinePointLayers = null; } if (pMouseCursor != null) { pMouseCursor.SetCursor(0); } } }
protected override void OnClick() { m_pApp = (IApplication)ArcMap.Application; if (m_pApp == null) { //if the app is null then could be running from ArcCatalog m_pApp = (IApplication)ArcCatalog.Application; } if (m_pApp == null) { MessageBox.Show("Could not access the application.", "No Application found"); return; } IGxApplication pGXApp = (IGxApplication)m_pApp; stdole.IUnknown pUnk = null; try { pUnk = (stdole.IUnknown)pGXApp.SelectedObject.InternalObjectName.Open(); } catch (COMException ex) { if (ex.ErrorCode == (int)fdoError.FDO_E_DATASET_TYPE_NOT_SUPPORTED_IN_RELEASE || ex.ErrorCode == -2147220944) { MessageBox.Show("The dataset is not supported in this release.", "Could not open the dataset"); } else { MessageBox.Show(ex.ErrorCode.ToString(), "Could not open the dataset"); } return; } if (pUnk is ICadastralFabric) { m_pCadaFab = (ICadastralFabric)pUnk; } else { MessageBox.Show("Please select a parcel fabric and try again.", "Not a parcel fabric"); return; } Utils FabricUTILS = new Utils(); ITable pTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans); IDataset pDS = (IDataset)pTable; IWorkspace pWS = pDS.Workspace; //Do a Start and Stop editing to make sure we're not running in an edit session if (!FabricUTILS.StartEditing(pWS, true)) {//if start editing fails then bail if (pUnk != null) { Marshal.ReleaseComObject(pUnk); } Cleanup(pTable, pWS); FabricUTILS = null; return; } FabricUTILS.StopEditing(pWS); bool bAddedField = false; if (FabricUTILS.GetFabricVersion((ICadastralFabric2)m_pCadaFab) < 2) { bAddedField = FabricUTILS.CadastralTableAddFieldV1(m_pCadaFab, esriCadastralFabricTable.esriCFTPlans, esriFieldType.esriFieldTypeInteger, "KeepOnMerge", "KeepOnMerge", 1); } else { bAddedField = FabricUTILS.CadastralTableAddField(m_pCadaFab, esriCadastralFabricTable.esriCFTPlans, esriFieldType.esriFieldTypeInteger, "KeepOnMerge", "KeepOnMerge", 1); } if (bAddedField) { MessageBox.Show("Plan-merge helper field 'KeepOnMerge' added.", "Add Field"); } else { MessageBox.Show("Field 'KeepOnMerge' could not be added." + Environment.NewLine + "The field may already exist.", "Add Field"); } if (bAddedField) { //if the field was added succesfully, add the Yes/No domain IDomain pDom = new CodedValueDomainClass(); try { IWorkspaceDomains2 pWSDoms = (IWorkspaceDomains2)pWS; pDom.FieldType = esriFieldType.esriFieldTypeInteger; pDom.Name = "Flag for Keep on Plan Merge"; pDom.Description = "Flag for Keep on Plan Merge"; ICodedValueDomain pCVDom = (ICodedValueDomain)pDom; //pCVDom.AddCode(0, "No"); pCVDom.AddCode(1, "Keep On Merge"); pWSDoms.AddDomain(pDom); } catch (COMException ex) { MessageBox.Show(ex.ErrorCode.ToString()); } //Get the field int iFld = pTable.FindField("KeepOnMerge"); if (iFld >= 0) { IField pFld = pTable.Fields.get_Field(iFld); // Check that the field and domain have the same field type. if (pFld.Type == pDom.FieldType) { // Cast the feature class to the ISchemaLock and IClassSchemaEdit interfaces. ISchemaLock schemaLock = (ISchemaLock)pTable; IClassSchemaEdit classSchemaEdit = (IClassSchemaEdit)pTable; // Attempt to get an exclusive schema lock. try { // Lock the class and alter the domain. schemaLock.ChangeSchemaLock(esriSchemaLock.esriExclusiveSchemaLock); classSchemaEdit.AlterDomain("KeepOnMerge", pDom); Console.WriteLine("The domain was successfully assigned."); } catch (COMException exc) { // Handle the exception in a way appropriate for the application. Console.WriteLine(exc.Message); } finally { // Set the schema lock to be a shared lock. schemaLock.ChangeSchemaLock(esriSchemaLock.esriSharedSchemaLock); } } } if (pDom != null) { Marshal.ReleaseComObject(pDom); } } Cleanup(pTable, pWS); FabricUTILS = null; }
public bool IsUnVersionedFabric(ICadastralFabric TheFabric) { bool IsFileBasedGDB = false; bool IsUnVersioned = false; ITable pTable = TheFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); IDataset pDS=(IDataset)TheFabric; IWorkspace pWS = pDS.Workspace; IsFileBasedGDB = (!(pWS.WorkspaceFactory.WorkspaceType == esriWorkspaceType.esriRemoteDatabaseWorkspace)); if (!(IsFileBasedGDB)) { IVersionedObject pVersObj = (IVersionedObject)pTable; IsUnVersioned = (!(pVersObj.IsRegisteredAsVersioned)); pTable = null; pVersObj = null; } if (IsUnVersioned && !IsFileBasedGDB) return true; else return false; }
protected override void OnClick() { m_bNoUpdates = false; m_sReport = "Direction Inverse Report:"; IEditor m_pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor"); if (m_pEd.EditState == esriEditState.esriStateNotEditing) { MessageBox.Show("Please start editing first, and try again.", "Start Editing"); return; } UID pUID = new UIDClass(); pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}"; ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID); ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID); //check if there is a Manual Mode "modify" job active =========== ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan; if (pCadPacMan.PacketOpen) { MessageBox.Show("The Delete Parcels command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.", "Delete Selected Parcels"); return; } try { IEditProperties2 pEditorProps2 = (IEditProperties2)m_pEd; IArray LineLyrArr; IMap pMap = m_pEd.Map; ICadastralFabric pCadFabric = null; //ISpatialReference pSpatRef = m_pEd.Map.SpatialReference; //IProjectedCoordinateSystem2 pPCS = null; IActiveView pActiveView = ArcMap.Document.ActiveView; //double dMetersPerUnit = 1; //if (pSpatRef == null) // ; //else if (pSpatRef is IProjectedCoordinateSystem2) //{ // pPCS = (IProjectedCoordinateSystem2)pSpatRef; // string sUnit = pPCS.CoordinateUnit.Name; // if (sUnit.Contains("Foot") && sUnit.Contains("US")) // sUnit = "U.S. Feet"; // dMetersPerUnit = pPCS.CoordinateUnit.MetersPerUnit; //} IAngularConverter pAngConv = new AngularConverterClass(); Utilities Utils = new Utilities(); if (!Utils.GetFabricSubLayers(pMap, esriCadastralFabricTable.esriCFTLines, out LineLyrArr)) { return; } //if we're in an edit session then grab the target fabric if (m_pEd.EditState == esriEditState.esriStateEditing) { pCadFabric = pCadEd.CadastralFabric; } if (pCadFabric == null) {//find the first fabric in the map if (!Utils.GetFabricFromMap(pMap, out pCadFabric)) { MessageBox.Show ("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again."); return; } } List <int> lstLineIds = new List <int>(); IFeatureClass pFabricLinesFC = (IFeatureClass)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines); int idxParcelIDFld = pFabricLinesFC.Fields.FindField("ParcelID"); int idxCENTERPTID = pFabricLinesFC.Fields.FindField("CenterPointID"); int idxRADIUS = pFabricLinesFC.Fields.FindField("Radius"); bool bFieldsPresent = true; if (idxParcelIDFld == -1) { bFieldsPresent = false; } if (idxCENTERPTID == -1) { bFieldsPresent = false; } if (idxRADIUS == -1) { bFieldsPresent = false; } if (!bFieldsPresent) { MessageBox.Show("Fields missing."); return; } Dictionary <int, List <string> > dictLineToCurveNeighbourData = new Dictionary <int, List <string> >(); m_pFIDSetParcels = new FIDSet(); for (int i = 0; i < LineLyrArr.Count; i++) { IFeatureSelection pFeatSel = LineLyrArr.Element[i] as IFeatureSelection; ISelectionSet pSelSet = pFeatSel.SelectionSet; ICursor pCursor = null; pSelSet.Search(null, false, out pCursor); IFeature pLineFeat = pCursor.NextRow() as IFeature; while (pLineFeat != null) { if (!lstLineIds.Contains(pLineFeat.OID)) { IGeometry pGeom = pLineFeat.ShapeCopy; ISegmentCollection pSegColl = pGeom as ISegmentCollection; ISegment pSeg = null; if (pSegColl.SegmentCount == 1) { pSeg = pSegColl.get_Segment(0); } else { //todo: but for now, only deals with single segment short segments Marshal.ReleaseComObject(pLineFeat); pLineFeat = pCursor.NextRow() as IFeature; continue; } //check geometry for circular arc if (pSeg is ICircularArc) { object dVal1 = pLineFeat.get_Value(idxRADIUS); object dVal2 = pLineFeat.get_Value(idxCENTERPTID); ICircularArc pCircArc = pSeg as ICircularArc; if (dVal1 != DBNull.Value && dVal2 != DBNull.Value) { Marshal.ReleaseComObject(pLineFeat); pLineFeat = pCursor.NextRow() as IFeature; continue; } } //query near lines int iFoundTangent = 0; List <string> sCurveInfoFromNeighbours = new List <string>(); if (Utils.HasTangentCurveMatchFeatures(pFabricLinesFC, (IPolycurve)pGeom, "", 1.5, 0.033, 1, (pSeg.Length * 1.1), out iFoundTangent, ref sCurveInfoFromNeighbours)) { lstLineIds.Add(pLineFeat.OID); int j = (int)pLineFeat.get_Value(idxParcelIDFld); m_pFIDSetParcels.Add(j); dictLineToCurveNeighbourData.Add(pLineFeat.OID, sCurveInfoFromNeighbours); } if (iFoundTangent == 1) //if there's only one tangent look further afield { int iFoundLinesCount = 0; int iFoundParallel = 0; if (Utils.HasParallelCurveMatchFeatures(pFabricLinesFC, (IPolycurve)pGeom, "", 1.5, 70, out iFoundLinesCount, out iFoundParallel, ref sCurveInfoFromNeighbours)) { if (!dictLineToCurveNeighbourData.ContainsKey(pLineFeat.OID)) { dictLineToCurveNeighbourData.Add(pLineFeat.OID, sCurveInfoFromNeighbours); } } } } Marshal.ReleaseComObject(pLineFeat); pLineFeat = pCursor.NextRow() as IFeature; } Marshal.ReleaseComObject(pCursor); } #region line to curve candidate analysis if (lstLineIds.Count == 0) { return; } RefineToBestRadiusAndCenterPoint(dictLineToCurveNeighbourData); #endregion if (dictLineToCurveNeighbourData.Count == 0) { return; } bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false; IWorkspace pWS = m_pEd.EditWorkspace; IProgressDialog2 pProgressorDialog = null; IMouseCursor pMouseCursor = new MouseCursorClass(); pMouseCursor.SetCursor(2); if (!Utils.SetupEditEnvironment(pWS, pCadFabric, m_pEd, out bIsFileBasedGDB, out bIsUnVersioned, out bUseNonVersionedDelete)) { return; } #region Create Cadastral Job string sTime = ""; if (!bIsUnVersioned && !bIsFileBasedGDB) { //see if parcel locks can be obtained on the selected parcels. First create a job. DateTime localNow = DateTime.Now; sTime = Convert.ToString(localNow); ICadastralJob pJob = new CadastralJobClass(); pJob.Name = sTime; pJob.Owner = System.Windows.Forms.SystemInformation.UserName; pJob.Description = "Convert lines to curves"; try { Int32 jobId = pCadFabric.CreateJob(pJob); } catch (COMException ex) { if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS) { MessageBox.Show("Job named: '" + pJob.Name + "', already exists"); } else { MessageBox.Show(ex.Message); } return; } } #endregion #region Test for Edit Locks ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric; //only need to get locks for parcels that have lines that are to be changed int[] pParcelIds = new int[m_pFIDSetParcels.Count()]; ILongArray pParcelsToLock = new LongArrayClass(); Utils.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, ref pParcelIds, m_pStepProgressor); if (!bIsUnVersioned && !bIsFileBasedGDB) { pFabLocks.LockingJob = sTime; ILongArray pLocksInConflict = null; ILongArray pSoftLcksInConflict = null; if (m_bShowProgressor && !bIsFileBasedGDB) { m_pStepProgressor.Message = "Testing for edit locks on parcels..."; } try { pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict); } catch (COMException pCOMEx) { if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS || pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED) { MessageBox.Show("Edit Locks could not be acquired on all selected parcels."); // since the operation is being aborted, release any locks that were acquired pFabLocks.UndoLastAcquiredLocks(); } else { MessageBox.Show(pCOMEx.Message + Environment.NewLine + Convert.ToString(pCOMEx.ErrorCode)); } return; } } #endregion if (m_pEd.EditState == esriEditState.esriStateEditing) { try { m_pEd.StartOperation(); } catch { m_pEd.AbortOperation();//abort any open edit operations and try again m_pEd.StartOperation(); } } if (bUseNonVersionedDelete) { if (!Utils.StartEditing(pWS, bIsUnVersioned)) { return; } } ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric; pSchemaEd.ReleaseReadOnlyFields((ITable)pFabricLinesFC, esriCadastralFabricTable.esriCFTLines); //release for edits m_pQF = new QueryFilter(); // m_pEd.StartOperation(); List <string> sInClauseList = Utils.InClauseFromOIDsList(lstLineIds, 995); foreach (string InClause in sInClauseList) { m_pQF.WhereClause = pFabricLinesFC.OIDFieldName + " IN (" + InClause + ")"; if (!UpdateCircularArcValues((ITable)pFabricLinesFC, m_pQF, bIsUnVersioned, dictLineToCurveNeighbourData)) { ; } } m_pEd.StopOperation("Insert missing circular arc information."); } catch (Exception ex) { MessageBox.Show(ex.Message); m_pEd.AbortOperation(); } finally { } }
protected override void OnMouseDown(MouseEventArgs arg) { IFeatureLayer pPointLayer = null; IFeatureLayer pLineLayer = null; IArray pParcelLayers = null; IFeatureLayer pControlLayer = null; IFeatureLayer pLinePointLayer = null; double dXYTol = 0.003; clsFabricUtils FabricUTILS = new clsFabricUtils(); IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor"); //first get the extension UID pUID = new UIDClass(); pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}"; ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID); ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID); //check if there is a Manual Mode "modify" job active =========== ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan; if (pCadPacMan.PacketOpen) { FabricUTILS.ExecuteCommand(m_CommUID); MessageBox.Show("This tool cannot be used when there is an open parcel, construction, or job.\r\nPlease complete or discard the open items, and try again."); return; } ICadastralFabric pCadFabric = null; //if we're in an edit session then grab the target fabric if (pEd.EditState == esriEditState.esriStateEditing) { pCadFabric = pCadEd.CadastralFabric; } else { FabricUTILS.ExecuteCommand(m_CommUID); MessageBox.Show("This tool works on a parcel fabric in an edit session.\r\nPlease start editing and try again."); return; } if (pCadFabric == null) {//find the first fabric in the map if (!FabricUTILS.GetFabricFromMap(ArcMap.Document.ActiveView.FocusMap, out pCadFabric)) { FabricUTILS.ExecuteCommand(m_CommUID); MessageBox.Show("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again."); return; } } IGeoDataset pGeoDS = (IGeoDataset)pCadFabric; ISpatialReferenceTolerance pSpatRefTol = (ISpatialReferenceTolerance)pGeoDS.SpatialReference; if (pSpatRefTol.XYToleranceValid == esriSRToleranceEnum.esriSRToleranceOK) { dXYTol = pSpatRefTol.XYTolerance; } IMouseCursor pMouseCursor = null; ISpatialFilter pSpatFilt = null; //spatial filter query hinging off the dragged rectangle selection IQueryFilter pQuFilter = null; //used for the non-spatial query for radial lines, as they have no geometry IRubberBand2 pRubberRect = null; IGeometryBag pGeomBag = null; ITopologicalOperator5 pUnionedPolyine = null; IPolygon pBufferedToolSelectGeometry = null; //geometry used to search for parents IFIDSet pLineFIDs = null; //the FIDSet used to collect the lines that'll be deleted IFIDSet pPointFIDs = null; // the FIDSet used to collect the points that'll be deleted IFIDSet pLinePointFIDs = null; // the FIDSet used to collect the line-points that'll be deleted List <int> pDeletedLinesPoints = new List <int>(); //list used to stage the ids for points that are referenced by lines List <int> pUsedPoints = new List <int>(); //list used to collect pointids that are referenced by existing lines List <int> CtrPointIDList = new List <int>(); //list for collecting the ids of center points List <int> pParcelsList = new List <int>(); //used only to avoid adding duplicates to IN clause string for, based on ties to radial lines List <int> pOrphanPointsList = new List <int>(); //list of orphan points defined from radial ines List <int> pPointsInsideBoxList = new List <int>(); //list of parcels that exist and that intersect the drag-box List <string> sFromToPair = new List <string>(); //list of from/to pairs for manging line points List <int> pLineToParcelIDRef = new List <int>(); //list of parcel id refs stored on lines IInvalidArea3 pInvArea = null; IFeatureClass pLines = null; IFeatureClass pPoints = null; IFeatureClass pParcels = null; IFeatureClass pLinePoints = null; IWorkspace pWS = null; try { #region define the rubber envelope geometry pRubberRect = new RubberEnvelopeClass(); IGeometry ToolSelectEnvelope = pRubberRect.TrackNew(ArcMap.Document.ActiveView.ScreenDisplay, null); if (ToolSelectEnvelope == null) { return; } ISegmentCollection pSegmentColl = new PolygonClass(); pSegmentColl.SetRectangle(ToolSelectEnvelope.Envelope); IPolygon ToolSelectGeometry = (IPolygon)pSegmentColl; if (pCadFabric == null) { return; } pMouseCursor = new MouseCursorClass(); pMouseCursor.SetCursor(2); #endregion FabricUTILS.GetFabricSubLayersFromFabric(ArcMap.Document.ActiveView.FocusMap, pCadFabric, out pPointLayer, out pLineLayer, out pParcelLayers, out pControlLayer, out pLinePointLayer); #region get tables and field indexes pLines = (IFeatureClass)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines); pPoints = (IFeatureClass)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints); pParcels = (IFeatureClass)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); pLinePoints = (IFeatureClass)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints); string sPref = ""; string sSuff = ""; int iCtrPtFldIDX = pLines.FindField("CENTERPOINTID"); int iFromPtFldIDX = pLines.FindField("FROMPOINTID"); int iToPtFldIDX = pLines.FindField("TOPOINTID"); int iCatFldIDX = pLines.FindField("CATEGORY"); int iParcelIDX = pLines.FindField("PARCELID"); int iDistanceIDX = pLines.FindField("DISTANCE"); pWS = pLines.FeatureDataset.Workspace; ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS; sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix); sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix); pSpatFilt = new SpatialFilterClass(); pSpatFilt.SpatialRel = esriSpatialRelEnum.esriSpatialRelIntersects; pSpatFilt.Geometry = ToolSelectGeometry; #endregion #region center point //need to make sure that center points are correctly handled for cases where the center point //is inside the select box, but the curve itself is not. The following is used to build an //IN CLAUSE for All the center points that are found within the tool's select geometry. int iIsCtrPtIDX = pPoints.FindField("CENTERPOINT"); int iCount = 0; int iCntCtrPoint = 0; string sCtrPntIDList1 = ""; IFeatureCursor pFeatCursPoints = pPoints.Search(pSpatFilt, false); IFeature pFeat7 = pFeatCursPoints.NextFeature(); while (pFeat7 != null) { iCount++; int iVal = -1; object Attr_val = pFeat7.get_Value(iIsCtrPtIDX); if (Attr_val != DBNull.Value) { iVal = Convert.ToInt32(pFeat7.get_Value(iIsCtrPtIDX)); } if (iVal == 1) { if (sCtrPntIDList1.Trim() == "") { sCtrPntIDList1 += pFeat7.OID.ToString(); } else { sCtrPntIDList1 += "," + pFeat7.OID.ToString(); } iCntCtrPoint++; } pPointsInsideBoxList.Add(pFeat7.OID); //used to check for orphan linepoints pOrphanPointsList.Add(pFeat7.OID); //this gets whittled down till only "pure" orphan points remain Marshal.ReleaseComObject(pFeat7); pFeat7 = pFeatCursPoints.NextFeature(); } Marshal.FinalReleaseComObject(pFeatCursPoints); #endregion #region create convex hull of lines //get the lines that intersect the search box and build a //polygon search geometry being the convex hull of those lines. IFeatureCursor pFeatCursLines = pLines.Search(pSpatFilt, false); pGeomBag = new GeometryBagClass(); IGeometryCollection pGeomColl = (IGeometryCollection)pGeomBag; IFeature pFeat1 = pFeatCursLines.NextFeature(); m_sDebug = "Add lines to Geometry Collection."; string sParcelRefOnLines = ""; object missing = Type.Missing; while (pFeat1 != null) { int iVal = (int)pFeat1.get_Value(iFromPtFldIDX); string sFromTo = iVal.ToString() + ":"; if (pOrphanPointsList.Contains(iVal)) //Does this need to be done...will remove fail if it's not there? { pOrphanPointsList.Remove(iVal); //does this need to be in the if block? } iVal = (int)pFeat1.get_Value(iToPtFldIDX); sFromTo += iVal.ToString(); if (pOrphanPointsList.Contains(iVal)) { pOrphanPointsList.Remove(iVal); } sFromToPair.Add(sFromTo); pGeomColl.AddGeometry(pFeat1.ShapeCopy, missing, missing); if (sParcelRefOnLines.Trim() == "") { sParcelRefOnLines = pFeat1.get_Value(iParcelIDX).ToString(); } else { sParcelRefOnLines += "," + pFeat1.get_Value(iParcelIDX).ToString(); } Marshal.ReleaseComObject(pFeat1); pFeat1 = pFeatCursLines.NextFeature(); } Marshal.FinalReleaseComObject(pFeatCursLines); #endregion #region Add Center Points for curves outside map extent if (iCntCtrPoint > 999) { throw new InvalidOperationException("The Delete Orphans tool works with smaller amounts of data." + Environment.NewLine + "Please try again, by selecting fewer fabric lines and points. (More than 1000 center points returned.)"); } //If there is no line geometry found, and there are also no points found, then nothing to do... if (pGeomColl.GeometryCount == 0 && iCount == 0) { return; } //Radial lines have no geometry so there is a special treatment for those; //that special treatment takes two forms, //1. if a circular arc is selected and it turns out that it is an orphan line, then we //need to take down its radial lines, and its center point as well. //2. if a center point is selected, we need to check if it's an orphan, by searching for its parent. //The parent parcel can easily be well beyond the query rectangle, so the original //search rectangle is buffered by the largest found radius distance, to make sure that all //parent parcels are "find-able." //The radial lines themselves are also needed; Get the radial lines from the Center Points //CtrPt is always TO point, so find lines CATEGORY = 4 AND TOPOINT IN () string sRadialLineListParcelID = ""; string sRadialLinesID = ""; string sRadialLinePoints = ""; double dRadiusBuff = 0; pQuFilter = new QueryFilterClass(); //Find all the radial lines based on the search query if (sCtrPntIDList1.Trim() != "") { pQuFilter.WhereClause = "CATEGORY = 4 AND TOPOINTID IN (" + sCtrPntIDList1 + ")"; //add all the *references* to Parcel ids for the radial lines, //and add the ID's of the lines IFeatureCursor pFeatCursLines8 = pLines.Search(pQuFilter, false); IFeature pFeat8 = pFeatCursLines8.NextFeature(); while (pFeat8 != null) { object Attr_val = pFeat8.get_Value(iDistanceIDX); double dVal = 0; if (Attr_val != DBNull.Value) { dVal = Convert.ToDouble(Attr_val); } dRadiusBuff = dRadiusBuff > dVal ? dRadiusBuff : dVal; int iVal = Convert.ToInt32(pFeat8.get_Value(iParcelIDX)); if (!pParcelsList.Contains(iVal)) { if (sRadialLineListParcelID.Trim() == "") { sRadialLineListParcelID += Convert.ToString(iVal); } else { sRadialLineListParcelID += "," + Convert.ToString(iVal); } } pParcelsList.Add(iVal); //pOrphanPointsList is used for "Pure Orphan point" detection //meaning that these are points that do not have ANY line, not even an orphan line. iVal = (int)pFeat8.get_Value(iFromPtFldIDX); if (pOrphanPointsList.Contains(iVal)) { pOrphanPointsList.Remove(iVal); } iVal = (int)pFeat8.get_Value(iToPtFldIDX); if (pOrphanPointsList.Contains(iVal)) { pOrphanPointsList.Remove(iVal); } if (sRadialLinesID.Trim() == "") { sRadialLinesID += Convert.ToString(iVal); } else { sRadialLinesID += "," + Convert.ToString(iVal); } //Add from point to list if (sRadialLinePoints.Trim() == "") { sRadialLinePoints += Convert.ToString(pFeat8.get_Value(iFromPtFldIDX)); } else { sRadialLinePoints += "," + Convert.ToString(pFeat8.get_Value(iFromPtFldIDX)); } //Add To point to list sRadialLinePoints += "," + Convert.ToString(pFeat8.get_Value(iToPtFldIDX)); Marshal.ReleaseComObject(pFeat8); pFeat8 = pFeatCursLines8.NextFeature(); } Marshal.FinalReleaseComObject(pFeatCursLines8); //create a polygon goeometry that is a buffer of the selection rectangle expanded //to the greatest radius of all the radial lines found. ITopologicalOperator topologicalOperator = (ITopologicalOperator)ToolSelectGeometry; pBufferedToolSelectGeometry = topologicalOperator.Buffer(dRadiusBuff) as IPolygon; } else { pQuFilter.WhereClause = ""; } #endregion #region OrphanLines if (pGeomColl.GeometryCount != 0) { pUnionedPolyine = new PolylineClass(); pUnionedPolyine.ConstructUnion((IEnumGeometry)pGeomBag); ITopologicalOperator pTopoOp = (ITopologicalOperator)pUnionedPolyine; IGeometry pConvexHull = pTopoOp.ConvexHull(); //With this convex hull, do a small buffer, //theis search geometry is used as a spatial query on the parcel polygons //and also on the parcel lines, to build IN Clauses pTopoOp = (ITopologicalOperator)pConvexHull; IGeometry pBufferedConvexHull = pTopoOp.Buffer(10 * dXYTol); if (pBufferedToolSelectGeometry != null) { pTopoOp = (ITopologicalOperator)pBufferedToolSelectGeometry; IGeometry pUnionPolygon = pTopoOp.Union(pBufferedConvexHull); pSpatFilt.Geometry = pUnionPolygon; } else { pSpatFilt.Geometry = pBufferedConvexHull; } } else { if (pQuFilter.WhereClause.Trim() == "" && pBufferedToolSelectGeometry == null) { pSpatFilt.Geometry = ToolSelectGeometry; } else { pSpatFilt.Geometry = pBufferedToolSelectGeometry; } } IColor pColor = new RgbColorClass(); pColor.RGB = System.Drawing.Color.Blue.ToArgb(); IScreenDisplay pScreenDisplay = ArcMap.Document.ActiveView.ScreenDisplay; FabricUTILS.FlashGeometry(pSpatFilt.Geometry, pScreenDisplay, pColor, 5, 100); pSpatFilt.SearchOrder = esriSearchOrder.esriSearchOrderSpatial; m_sDebug = "Searching Parcels table."; pInvArea = new InvalidAreaClass(); IFeatureCursor pFeatCursParcels = pParcels.Search(pSpatFilt, false); IFeature pFeat2 = pFeatCursParcels.NextFeature(); string sParcelIDList = ""; iCount = 0; //create the "NOT IN" CLAUSE for parcels that exist in the DB and that are within the search area //Will be used as a search on lines to get the Orphan Lines while (pFeat2 != null) { iCount++; if (sParcelIDList.Trim() == "") { sParcelIDList += pFeat2.OID.ToString(); } else { sParcelIDList += "," + pFeat2.OID.ToString(); } Marshal.ReleaseComObject(pFeat2); if (iCount > 999) { break; } pFeat2 = pFeatCursParcels.NextFeature(); } Marshal.FinalReleaseComObject(pFeatCursParcels); //if we have more than 999 in clause tokens, there will be problems on Oracle. //Since this is an interactive tool, we expect it not to be used on a large amount of data. //for this reason, the following message is displayed if more than 999 parcels are returned in this query. //TODO: for the future this can be made to work on larger sets of data. if (iCount > 999) { throw new InvalidOperationException("The Delete Orphans tool works with smaller amounts of data." + Environment.NewLine + "Please try again, by selecting fewer fabric lines and points. (More than 1000 parcels returned.)"); } m_sDebug = "Building the used points list."; //This first pass contains all references to points found within the parent parcel search buffer //Later, points are removed from this list IFeatureCursor pFeatCursLargerLineSet = pLines.Search(pSpatFilt, false); IFeature pFeat3 = pFeatCursLargerLineSet.NextFeature(); while (pFeat3 != null) { iCount++; object Attr_val = pFeat3.get_Value(iCtrPtFldIDX); if (Attr_val != DBNull.Value) { pUsedPoints.Add(Convert.ToInt32(Attr_val)); //add center point } int iVal = (int)pFeat3.get_Value(iFromPtFldIDX); pUsedPoints.Add(iVal);//add from point iVal = (int)pFeat3.get_Value(iToPtFldIDX); pUsedPoints.Add(iVal);//add to point Marshal.ReleaseComObject(pFeat3); pFeat3 = pFeatCursLargerLineSet.NextFeature(); } Marshal.FinalReleaseComObject(pFeatCursLargerLineSet); //pUsedPoints list is at this stage, references to points for all lines found within the search area. //use the IN clause of the parcel ids to search for lines within //the original search box, and that are also orphans that do not have a parent parcel. pSpatFilt.WhereClause = ""; pSpatFilt.Geometry = ToolSelectGeometry; pSpatFilt.SpatialRel = esriSpatialRelEnum.esriSpatialRelIntersects; pSpatFilt.SearchOrder = esriSearchOrder.esriSearchOrderSpatial; IFeatureCursor pFeatCursor = null; if (pGeomColl.GeometryCount == 0) { if (sParcelIDList.Trim().Length > 0 && sCtrPntIDList1.Trim().Length > 0) { pQuFilter.WhereClause = "(PARCELID NOT IN (" + sParcelIDList + ")) AND (CATEGORY = 4 AND TOPOINTID IN (" + sCtrPntIDList1 + "))"; pFeatCursor = pLines.Search(pQuFilter, false); } else if (sParcelIDList.Trim().Length == 0 && sCtrPntIDList1.Trim().Length > 0) { pQuFilter.WhereClause = "CATEGORY = 4 AND TOPOINTID IN (" + sCtrPntIDList1 + ")"; pFeatCursor = pLines.Search(pQuFilter, false); } } else {//do a spatial query if (sParcelIDList.Trim().Length > 0) { pSpatFilt.WhereClause = "PARCELID NOT IN (" + sParcelIDList + ")"; } else { pSpatFilt.WhereClause = ""; } pFeatCursor = pLines.Search(pSpatFilt, false); } m_sDebug = "Collecting lines to be deleted."; //start collecting the lines that need to be deleted iCount = 0; int iCtrPointCount = 0; string sCtrPointIDList = ""; string sLineParcelIDReference = ""; //Feature cursor is lines that are NOT IN the ParcelIDList if (pFeatCursor != null) { pLineFIDs = new FIDSetClass(); IFeature pFeat4 = pFeatCursor.NextFeature(); while (pFeat4 != null) { iCount++; pLineFIDs.Add(pFeat4.OID); int iParcRef = Convert.ToInt32(pFeat4.get_Value(iParcelIDX)); if (sLineParcelIDReference.Trim() == "") { sLineParcelIDReference = iParcRef.ToString(); } else { if (!pLineToParcelIDRef.Contains(iParcRef)) { sLineParcelIDReference += "," + iParcRef.ToString(); } } pLineToParcelIDRef.Add(iParcRef); pInvArea.Add((IObject)pFeat4); //now for this line, get it's points //first add the center point reference if there is one object Attr_val = pFeat4.get_Value(iCtrPtFldIDX); if (Attr_val != DBNull.Value) { iCtrPointCount++; int iCtrPointID = Convert.ToInt32(Attr_val); pDeletedLinesPoints.Add(iCtrPointID); //add this line's center point pUsedPoints.Remove(iCtrPointID); if (sCtrPointIDList.Trim() == "") { sCtrPointIDList = iCtrPointID.ToString(); } else { if (CtrPointIDList.Contains(iCtrPointID)) { iCtrPointCount--; } else { sCtrPointIDList += "," + iCtrPointID.ToString(); } } CtrPointIDList.Add(iCtrPointID);//to keep track of repeats } //and also add the FROM and TO point references if they exist int iVal = (int)pFeat4.get_Value(iFromPtFldIDX); pDeletedLinesPoints.Add(iVal);//add FROM point if (pGeomColl.GeometryCount > 0) { pUsedPoints.Remove(iVal); } iVal = (int)pFeat4.get_Value(iToPtFldIDX); pDeletedLinesPoints.Add(iVal);//add TO point if (pGeomColl.GeometryCount > 0) { pUsedPoints.Remove(iVal); } Marshal.ReleaseComObject(pFeat4); if (iCtrPointCount > 999) { break; } pFeat4 = pFeatCursor.NextFeature(); } Marshal.FinalReleaseComObject(pFeatCursor); } if (iCtrPointCount > 999) { throw new InvalidOperationException("The Delete Orphans tool works with smaller amounts of data." + Environment.NewLine + "Please try again, by selecting fewer fabric lines and points. (More than 1000 center points returned.)"); } m_sDebug = "Adding orphan radial lines to list."; if (sCtrPointIDList.Trim().Length > 0) { //add the Radial lines at each end of the curves using the collected CtrPtIDs //CtrPt is always TO point, so find lines CATEGORY = 4 AND TOPOINT IN () pQuFilter.WhereClause = "CATEGORY = 4 AND TOPOINTID IN (" + sCtrPointIDList + ")"; pFeatCursor = pLines.Search(pQuFilter, false); IFeature pFeat5 = pFeatCursor.NextFeature(); while (pFeat5 != null) { pLineFIDs.Add(pFeat5.OID); int iParcRef = Convert.ToInt32(pFeat5.get_Value(iParcelIDX)); pLineToParcelIDRef.Add(iParcRef); if (sLineParcelIDReference.Trim() == "") { sLineParcelIDReference = iParcRef.ToString(); } else { if (!pLineToParcelIDRef.Contains(iParcRef)) { sLineParcelIDReference += "," + iParcRef.ToString(); } } Marshal.ReleaseComObject(pFeat5); pFeat5 = pFeatCursor.NextFeature(); } Marshal.FinalReleaseComObject(pFeatCursor); } else { pQuFilter.WhereClause = ""; } //refine the DeletedLinesPoints list foreach (int i in pUsedPoints) { if (pDeletedLinesPoints.Contains(i)) { do { } while (pDeletedLinesPoints.Remove(i)); } } //add the points to a new FIDSet pPointFIDs = new FIDSetClass(); foreach (int i in pDeletedLinesPoints) { pPointFIDs.Add(i); } #endregion #region OrphanPoints //We already know which points to delete based on taking down the orphan lines. //We need to still add to the points FIDSet those points that are "pure" ophan points //as defined for the pOrphanPointsList variable. //and add the orphan points to the points FIDSet foreach (int i in pOrphanPointsList) { bool bFound = false; pPointFIDs.Find(i, out bFound); if (!bFound) { pPointFIDs.Add(i); } } #endregion #region orphan Line points //next check for orphan line-points //the line-point is deleted if there is no underlying point //or if the from and to point references do not exist. pSpatFilt.WhereClause = ""; pSpatFilt.Geometry = ToolSelectGeometry; IFeatureCursor pFeatCursLinePoints = pLinePoints.Search(pSpatFilt, false); IFeature pLPFeat = pFeatCursLinePoints.NextFeature(); int iLinePtPointIdIdx = pLinePoints.FindField("LINEPOINTID"); int iLinePtFromPtIdIdx = pLinePoints.FindField("FROMPOINTID"); int iLinePtToPtIdIdx = pLinePoints.FindField("TOPOINTID"); pLinePointFIDs = new FIDSetClass(); while (pLPFeat != null) { bool bExistsA = true; bool bExists1 = true; bool bExists2 = true; bool bExists3 = true; int iVal = (int)pLPFeat.get_Value(iLinePtPointIdIdx); pPointFIDs.Find(iVal, out bExists1); if (!pPointsInsideBoxList.Contains(iVal)) { bExistsA = false; } iVal = (int)pLPFeat.get_Value(iLinePtFromPtIdIdx); string sFrom = iVal.ToString(); pPointFIDs.Find(iVal, out bExists2); iVal = (int)pLPFeat.get_Value(iLinePtToPtIdIdx); string sTo = iVal.ToString(); pPointFIDs.Find(iVal, out bExists3); int iOID = pLPFeat.OID; if (bExists1 || bExists2 || bExists3) { pLinePointFIDs.Add(iOID); } if (!sFromToPair.Contains(sFrom + ":" + sTo) && !sFromToPair.Contains(sTo + ":" + sFrom)) { pLinePointFIDs.Find(iOID, out bExists1); if (!bExists1) { pLinePointFIDs.Add(iOID); } } //if (!bExistsA || !bExistsB || !bExistsC) if (!bExistsA) { bool bFound = true; pLinePointFIDs.Find(iOID, out bFound); if (!bFound) { pLinePointFIDs.Add(iOID); } } pPointsInsideBoxList.Contains(iVal); Marshal.ReleaseComObject(pLPFeat); pLPFeat = pFeatCursLinePoints.NextFeature(); } Marshal.FinalReleaseComObject(pFeatCursLinePoints); #endregion #region Refine the lines that are on the delete list //next step is to refine and double-check to make sure that the lines that are on the delete list //do not have a parcel record somewhere else (not spatially connected to the line) (example unjoined, or bad geom) string sFreshlyFoundParcels = ""; if (sLineParcelIDReference.Trim() != "") { pQuFilter.WhereClause = sPref + pParcels.OIDFieldName + sSuff + " IN (" + sLineParcelIDReference + ")"; pFeatCursor = pParcels.Search(pQuFilter, false); IFeature pFeat6 = pFeatCursor.NextFeature(); while (pFeat6 != null) { int iOID = pFeat6.OID; if (sFreshlyFoundParcels.Trim() == "") { sFreshlyFoundParcels = iOID.ToString(); } else { sFreshlyFoundParcels += "," + iOID.ToString(); } Marshal.ReleaseComObject(pFeat6); pFeat6 = pFeatCursor.NextFeature(); } Marshal.FinalReleaseComObject(pFeatCursor); if (sFreshlyFoundParcels.Trim() != "") { pQuFilter.WhereClause = "PARCELID IN (" + sFreshlyFoundParcels + ")"; pFeatCursor = pLines.Search(pQuFilter, false); IFeature pFeat9 = pFeatCursor.NextFeature(); while (pFeat9 != null) { int iOID = pFeat9.OID; bool bIsHere = false; pLineFIDs.Delete(iOID); int iVal = Convert.ToInt32(pFeat9.get_Value(iFromPtFldIDX)); pPointFIDs.Find(iVal, out bIsHere); if (bIsHere) { pPointFIDs.Delete(iVal); } iVal = Convert.ToInt32(pFeat9.get_Value(iToPtFldIDX)); pPointFIDs.Find(iVal, out bIsHere); if (bIsHere) { pPointFIDs.Delete(iVal); } Marshal.ReleaseComObject(pFeat9); pFeat9 = pFeatCursor.NextFeature(); } Marshal.FinalReleaseComObject(pFeatCursor); } } #endregion #region Make sure the points on the delete list are not part of a construction //For post 10.0, Make sure the points on the delete list are not part of a construction if they are then null geometry //pQuFilter.WhereClause=pLines.LengthField.Name + " = 0 AND CATEGORY <> 4"; //IFeatureCursor pFeatCursLines101 = pLines.Search(pQuFilter, false); //this would open a new cursor and do a query on the entire #endregion #region report results and do edits dlgReport Report = new dlgReport(); //Display the dialog System.Drawing.Color BackColorNow = Report.textBox1.BackColor; if (iCount == 0 && pPointFIDs.Count() == 0 && pLinePointFIDs.Count() == 0) { Report.textBox1.BackColor = System.Drawing.Color.LightGreen; Report.textBox1.Text = "Selected area has no orphan lines or points."; } else { int iCount1 = 0; int iCount2 = 0; int iCount3 = 0; if (pLineFIDs != null) { iCount1 = pLineFIDs.Count(); } if (pPointFIDs != null) { iCount2 = pPointFIDs.Count(); } if (pLinePointFIDs != null) { iCount3 = pLinePointFIDs.Count(); } iCount = iCount1 + iCount2 + iCount3; if (iCount > 0) { pEd.StartOperation(); FabricUTILS.DeleteRowsByFIDSet((ITable)pLines, pLineFIDs, null, null); FabricUTILS.DeleteRowsByFIDSet((ITable)pPoints, pPointFIDs, null, null); if (pPointFIDs.Count() > 0) { //now need to update the control points associated with any deleted points. ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric; ITable pControlTable = pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTControl); int idxNameFldOnControl = pControlTable.FindField("POINTID"); string ControlNameFldName = pControlTable.Fields.get_Field(idxNameFldOnControl).Name; int i; List <int> pPointFIDList = new List <int>(); pPointFIDs.Reset(); pPointFIDs.Next(out i); while (i > -1) { pPointFIDList.Add(i); pPointFIDs.Next(out i); } List <string> InClausePointsNotConnectedToLines = FabricUTILS.InClauseFromOIDsList(pPointFIDList, 995); pQuFilter.WhereClause = ControlNameFldName + " IN (" + InClausePointsNotConnectedToLines[0] + ")"; pSchemaEd.ReleaseReadOnlyFields(pControlTable, esriCadastralFabricTable.esriCFTControl); //release safety-catch if (!FabricUTILS.ResetControlAssociations(pControlTable, pQuFilter, false)) { pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on pEd.AbortOperation(); return; } pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on } pQuFilter.WhereClause = ""; FabricUTILS.DeleteRowsByFIDSet((ITable)pLinePoints, pLinePointFIDs, null, null); pEd.StopOperation("Delete " + iCount.ToString() + " orphans"); Report.textBox1.Text = "Deleted:"; if (iCount1 > 0) { Report.textBox1.Text += Environment.NewLine + iCount1.ToString() + " orphaned lines"; } if (iCount2 > 0) { Report.textBox1.Text += Environment.NewLine + iCount2.ToString() + " orphaned points"; } if (iCount3 > 0) { Report.textBox1.Text += Environment.NewLine + iCount3.ToString() + " orphaned line points"; } } if (sFreshlyFoundParcels.Trim() != "") { if (Report.textBox1.Text.Trim() != "") { Report.textBox1.Text += Environment.NewLine; } Report.textBox1.Text += "Info: Line(s) that you selected are not directly" + Environment.NewLine + "touching a parent parcel geometry. Check parcels with OIDs:" + sFreshlyFoundParcels; } } IArea pArea = (IArea)ToolSelectGeometry; if (pArea.Area > 0) { SetDialogLocationAtPoint(Report, pArea.Centroid); } DialogResult pDialogResult = Report.ShowDialog(); Report.textBox1.BackColor = BackColorNow; pInvArea.Display = ArcMap.Document.ActiveView.ScreenDisplay; pInvArea.Invalidate((short)esriScreenCache.esriAllScreenCaches); if (pPointLayer != null) { ArcMap.Document.ActiveView.PartialRefresh(esriViewDrawPhase.esriViewGeography, pPointLayer, ArcMap.Document.ActiveView.Extent); } #endregion } catch (Exception ex) { if (pEd != null) { pEd.AbortOperation(); } MessageBox.Show(ex.Message + Environment.NewLine + m_sDebug, "Delete Orphans Tool"); this.OnDeactivate(); } #region Final Cleanup finally { pDeletedLinesPoints.Clear(); pDeletedLinesPoints = null; pUsedPoints.Clear(); pUsedPoints = null; CtrPointIDList.Clear(); CtrPointIDList = null; pParcelsList.Clear(); pParcelsList = null; pOrphanPointsList.Clear(); pOrphanPointsList = null; pPointsInsideBoxList.Clear(); pPointsInsideBoxList = null; pLineToParcelIDRef.Clear(); pLineToParcelIDRef = null; sFromToPair.Clear(); sFromToPair = null; FabricUTILS = null; } #endregion }
private void btnChkField_Click(object sender, EventArgs e) { ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension"); bool bIsEditing = (ArcMap.Editor.EditState == ESRI.ArcGIS.Editor.esriEditState.esriStateEditing); ICadastralFabric pCadFab = pCadEd.CadastralFabric; IFeatureClass ParcelLinesFC = null; if (bIsEditing) { ParcelLinesFC = pCadFab.get_CadastralTable(esriCadastralFabricTable.esriCFTLines) as IFeatureClass; } else { UTIL.GetFabricFromMap(ParcelEditHelper.ArcMap.Document.ActiveView.FocusMap, out pCadFab); ParcelLinesFC = pCadFab.get_CadastralTable(esriCadastralFabricTable.esriCFTLines) as IFeatureClass; } if (pCadFab == null) { MessageBox.Show("Parcel fabric not found in the map.", "Check"); return; } int iFldIdx = ParcelLinesFC.FindField(this.txtFldName.Text); if (iFldIdx == -1) { if (bIsEditing) { MessageBox.Show("Field is not present. Stop editing, and click 'Check' again to be prompted to create the field, " + "or else manually create the string field using the Catalog window or ArcToolbox.", "Check"); } else { DialogResult dialogRes = MessageBox.Show("Field is not present. Create string field called " + this.txtFldName.Text + " ?", "Create field", MessageBoxButtons.YesNo); if (dialogRes == DialogResult.No) { return; } if (this.txtFldName.Text.Trim() == "") { return; } IField2 pFld = new FieldClass(); IFieldEdit2 pFldEd = pFld as IFieldEdit2; pFldEd.Editable_2 = true; pFldEd.Name_2 = this.txtFldName.Text; pFldEd.Type_2 = esriFieldType.esriFieldTypeString; pFldEd.Length_2 = 50; ParcelLinesFC.AddField(pFld); } } else { IField pField = ParcelLinesFC.Fields.Field[iFldIdx]; if (pField.Type != esriFieldType.esriFieldTypeString) { MessageBox.Show("A field called " + this.txtFldName.Text + " was found." + Environment.NewLine + "However, the field is not a Text field." + Environment.NewLine + "Please create or use a different Text field.", "Check field", MessageBoxButtons.OK, MessageBoxIcon.Warning); } else { MessageBox.Show("A field called " + this.txtFldName.Text + " was found.", "Check field"); } } }
protected override void OnClick() { IMouseCursor pMouseCursor = new MouseCursorClass(); pMouseCursor.SetCursor(2); //get the plans UID pUID = new UIDClass(); pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}"; ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID); ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID); IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor"); dlgEmptyPlansList pPlansListDialog = new dlgEmptyPlansList(); IActiveView pActiveView = ArcMap.Document.ActiveView; IMap pMap = pActiveView.FocusMap; ICadastralFabric pCadFabric = null; clsFabricUtils FabricUTILS = new clsFabricUtils(); //if we're in an edit session then grab the target fabric if (pEd.EditState == esriEditState.esriStateEditing) { pCadFabric = pCadEd.CadastralFabric; } if (pCadFabric == null) { //find the first fabric in the map if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric)) { MessageBox.Show ("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again."); return; } } ITable pPlansTable = null; if (pCadFabric != null) { pPlansTable = pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans); } else { return; } IDataset pDS = (IDataset)pPlansTable; IWorkspace pWS = pDS.Workspace; bool bIsFileBasedGDB; bool bIsUnVersioned; bool bUseNonVersionedEdit; if (!(FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB, out bIsUnVersioned, out bUseNonVersionedEdit))) { return; } IFIDSet pEmptyPlans = null; if (!FindEmptyPlans(pCadFabric, null, null, out pEmptyPlans)) { return; } //Fill the list on the dialog AddEmptyPlansToList(pCadFabric, pEmptyPlans, pPlansListDialog); //Display the dialog DialogResult pDialogResult = pPlansListDialog.ShowDialog(); if (pDialogResult != DialogResult.OK) { return; } IArray array = (IArray)pPlansListDialog.checkedListBox1.Tag; IFIDSet pPlansToDelete = new FIDSetClass(); foreach (int checkedItemIndex in pPlansListDialog.checkedListBox1.CheckedIndices) { Int32 iPlansID = (Int32)array.get_Element(checkedItemIndex); if (iPlansID > -1) { pPlansToDelete.Add(iPlansID); } } if (bUseNonVersionedEdit) { FabricUTILS.DeleteRowsUnversioned(pWS, pPlansTable, pPlansToDelete, null, null); } else { try { try { pEd.StartOperation(); } catch { pEd.AbortOperation();//abort any open edit operations and try again pEd.StartOperation(); } FabricUTILS.DeleteRowsByFIDSet(pPlansTable, pPlansToDelete, null, null); pEd.StopOperation("Delete Empty Plans"); } catch (COMException ex) { MessageBox.Show(Convert.ToString(ex.ErrorCode)); pEd.AbortOperation(); } } }
private void RefreshTableArray() { m_array.RemoveAll(); ITable pCadastralTable; IDataset pDS; txtBoxSummary.Text = ""; if (m_pCadaFab == null) { return; } string Suffix; m_RowDropCount = 0; m_ResetAccuracyTableDefaults = false; m_TruncateControl = false; m_TruncateParcelsLinesPoints = false; m_TruncateAdjustmentTables = false; m_TruncateJobTables = false; try { foreach (int checkedItemIndex in checkedListBox1.CheckedIndices) { if (txtBoxSummary.Text.Trim().Length == 0) { Suffix = ""; } else { Suffix = txtBoxSummary.Text + Environment.NewLine; } //Drop all control points if (checkedItemIndex == 0) { pCadastralTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTControl); m_TruncateControl = true; m_array.Add(pCadastralTable); pDS = (IDataset)pCadastralTable; int RowCnt = pCadastralTable.RowCount(null); m_RowDropCount += RowCnt; string sInfo = Convert.ToString(RowCnt) + " rows"; if (RowCnt == 0) { sInfo = "empty"; } txtBoxSummary.Text = pDS.Name + " (" + sInfo + ")"; } //Drop all plans, parcels, lines, points, and line-points if (checkedItemIndex == 1) { pCadastralTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); m_TruncateParcelsLinesPoints = true; m_array.Add(pCadastralTable); pDS = (IDataset)pCadastralTable; int RowCnt = pCadastralTable.RowCount(null); m_RowDropCount += RowCnt; string sInfo = Convert.ToString(RowCnt) + " rows"; if (RowCnt == 0) { sInfo = "empty"; } txtBoxSummary.Text = Suffix + pDS.Name + " (" + sInfo + ")" + Environment.NewLine; pCadastralTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTLines); m_array.Add(pCadastralTable); pDS = (IDataset)pCadastralTable; RowCnt = pCadastralTable.RowCount(null); m_RowDropCount += RowCnt; sInfo = Convert.ToString(RowCnt) + " rows"; if (RowCnt == 0) { sInfo = "empty"; } txtBoxSummary.Text = txtBoxSummary.Text + pDS.Name + " (" + sInfo + ")" + Environment.NewLine; pCadastralTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints); m_array.Add(pCadastralTable); pDS = (IDataset)pCadastralTable; RowCnt = pCadastralTable.RowCount(null); m_RowDropCount += RowCnt; sInfo = Convert.ToString(RowCnt) + " rows"; if (RowCnt == 0) { sInfo = "empty"; } txtBoxSummary.Text = txtBoxSummary.Text + pDS.Name + " (" + sInfo + ")" + Environment.NewLine; pCadastralTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints); m_array.Add(pCadastralTable); pDS = (IDataset)pCadastralTable; RowCnt = pCadastralTable.RowCount(null); m_RowDropCount += RowCnt; sInfo = Convert.ToString(RowCnt) + " rows"; if (RowCnt == 0) { sInfo = "empty"; } txtBoxSummary.Text = txtBoxSummary.Text + pDS.Name + " (" + sInfo + ")" + Environment.NewLine; pCadastralTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans); m_array.Add(pCadastralTable); pDS = (IDataset)pCadastralTable; IQueryFilter pQF = new QueryFilterClass(); IWorkspace pWS = pDS.Workspace; string sPref; string sSuff; ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS; sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix); sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix); string sFieldName = "NAME"; //pQF.WhereClause = sPref + sFieldName + sSuff + " <> '<map>'"; pQF.WhereClause = sFieldName + " <> '<map>'"; try { RowCnt = pCadastralTable.RowCount(pQF); } catch (COMException ex) { MessageBox.Show(ex.Message + ": " + Convert.ToString(ex.ErrorCode)); return; } m_RowDropCount += RowCnt; sInfo = Convert.ToString(RowCnt) + " rows"; if (RowCnt == 0) { sInfo = "empty"; } txtBoxSummary.Text = txtBoxSummary.Text + pDS.Name + " (" + sInfo + ")"; } //Drop all fabric jobs if (checkedItemIndex == 2) { pCadastralTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTJobObjects); m_TruncateJobTables = true; m_array.Add(pCadastralTable); pDS = (IDataset)pCadastralTable; int RowCnt = pCadastralTable.RowCount(null); m_RowDropCount += RowCnt; string sInfo = Convert.ToString(RowCnt) + " rows"; if (RowCnt == 0) { sInfo = "empty"; } txtBoxSummary.Text = Suffix + pDS.Name + " (" + sInfo + ")" + Environment.NewLine; pCadastralTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTJobs); m_array.Add(pCadastralTable); pDS = (IDataset)pCadastralTable; RowCnt = pCadastralTable.RowCount(null); m_RowDropCount += RowCnt; sInfo = Convert.ToString(RowCnt) + " rows"; if (RowCnt == 0) { sInfo = "empty"; } txtBoxSummary.Text = txtBoxSummary.Text + pDS.Name + " (" + sInfo + ")"; } //Drop all feature adjustment information and vectors if (checkedItemIndex == 3) { pCadastralTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTVectors); m_TruncateAdjustmentTables = true; m_array.Add(pCadastralTable); pDS = (IDataset)pCadastralTable; int RowCnt = pCadastralTable.RowCount(null); m_RowDropCount += RowCnt; string sInfo = Convert.ToString(RowCnt) + " rows"; if (RowCnt == 0) { sInfo = "empty"; } txtBoxSummary.Text = Suffix + pDS.Name + " (" + sInfo + ")" + Environment.NewLine; pCadastralTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTLevels); m_array.Add(pCadastralTable); pDS = (IDataset)pCadastralTable; RowCnt = pCadastralTable.RowCount(null); m_RowDropCount += RowCnt; sInfo = Convert.ToString(RowCnt) + " rows"; if (RowCnt == 0) { sInfo = "empty"; } txtBoxSummary.Text = txtBoxSummary.Text + pDS.Name + " (" + sInfo + ")" + Environment.NewLine; pCadastralTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTAdjustments); m_array.Add(pCadastralTable); pDS = (IDataset)pCadastralTable; RowCnt = pCadastralTable.RowCount(null); m_RowDropCount += RowCnt; sInfo = Convert.ToString(RowCnt) + " rows"; if (RowCnt == 0) { sInfo = "empty"; } txtBoxSummary.Text = txtBoxSummary.Text + pDS.Name + " (" + sInfo + ")"; } //Reset Accuracy to default values if (checkedItemIndex == 4) { m_ResetAccuracyTableDefaults = true; pCadastralTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTAccuracy); m_array.Add(pCadastralTable); pDS = (IDataset)pCadastralTable; int RowCnt = pCadastralTable.RowCount(null); m_RowDropCount += RowCnt; txtBoxSummary.Text = Suffix + pDS.Name + " (" + Convert.ToString(RowCnt) + " rows)..." + Environment.NewLine + "=================================" + Environment.NewLine + "...then will re-add these default records" + Environment.NewLine + " to the Accuracy table:" + Environment.NewLine + "==================" + Environment.NewLine + "1 - Highest" + Environment.NewLine + "2 - After 1980" + Environment.NewLine + "3 - 1908 to 1980" + Environment.NewLine + "4 - 1881 to 1907" + Environment.NewLine + "5 - Before 1881" + Environment.NewLine + "6 - 1800" + Environment.NewLine + "7 - Lowest" + Environment.NewLine; } } } catch (COMException ex) { MessageBox.Show(ex.Message + ": " + Convert.ToString(ex.ErrorCode)); } }
protected override void OnClick() { //go get a traverse file // Display .Net dialog for File selection. OpenFileDialog openFileDialog = new OpenFileDialog(); // Set File Filter openFileDialog.Filter = "Cadastral XML file (*.xml)|*.xml"; // Enable multi-select openFileDialog.Multiselect = true; // Don't need to Show Help openFileDialog.ShowHelp = false; // Set Dialog Title openFileDialog.Title = "Append Cadastral XML files"; openFileDialog.FilterIndex = 2; // Display Open File Dialog if (openFileDialog.ShowDialog() != DialogResult.OK) { openFileDialog = null; return; } //Get the cadastral editor ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension"); ICadastralFabric pCadFabric = pCadEd.CadastralFabric; IEditor pEd = ArcMap.Editor; ITrackCancel pTrkCan = new CancelTracker(); // Create and display the Progress Dialog IProgressDialogFactory pProDlgFact = new ProgressDialogFactory(); IProgressDialog2 pProDlg = pProDlgFact.Create(pTrkCan, 0) as IProgressDialog2; //Set the properties of the Progress Dialog pProDlg.CancelEnabled = true; pProDlg.Description = " "; pProDlg.Title = "Append"; pProDlg.Animation = esriProgressAnimationTypes.esriProgressGlobe; string sCopiedCadastralXMLFile = ""; try { ICadastralJob CadaJob; bool bJobExists = false; //used to trap for the special error message condition of existing job pEd.StartOperation(); #region workaround for setting Projection ICadastralJob CadaJobTemp; bJobExists = false; if (!CreateCadastralJob(pCadFabric, "TEMPJOB", out CadaJobTemp, true, ref bJobExists)) { if (!bJobExists) // if the create job failed for some other reason than it already exists, then bail out. { MessageBox.Show("Job could not be created."); return; } } //do an extract to set the spatial reference: bug workaround ((ICadastralFabric3)pCadFabric).ExtractCadastralPacket(CadaJobTemp.Name, ArcMap.Document.ActiveView.FocusMap.SpatialReference as IProjectedCoordinateSystem, null, true); #endregion //make a temporary file for the edited cadastral XML that is used for the fabric update string sTempPath = System.IO.Path.GetTempPath(); sCopiedCadastralXMLFile = System.IO.Path.Combine(sTempPath, "LastUpdatedCadastralXMLAppendedFromBatch.xml"); int iFileCount = 0; int iTotalFiles = openFileDialog.FileNames.GetLength(0); List <string> lstPlans = new List <string>(); #region get all plan names for all files foreach (String CadastralXMLPath in openFileDialog.FileNames) { TextReader tr = null; try { tr = new StreamReader(CadastralXMLPath); } catch (Exception ex) { MessageBox.Show(ex.Message); return; } // string[] sFileLine = new string[0]; //define as dynamic array string sLine = ""; int iCount = 0; bool bInPlanData = false; bool bInParcel = false; //fill the array with the lines from the file while (sLine != null) { sLine = tr.ReadLine(); try { if (sLine.Trim().Length >= 1) //test for empty lines { if (!bInParcel && !bInPlanData) { bInPlanData = sLine.Contains("<plan>"); } if (bInPlanData && sLine.Contains("<name>") && sLine.Contains("</name>")) { string sPlanName = sLine.Replace("<name>", "").Replace("</name>", "").Replace("\t", "").Trim(); if (!lstPlans.Contains(sPlanName)) { lstPlans.Add(sPlanName); } bInPlanData = false; } } iCount++; } catch { } } tr.Close(); //close the file and release resources } string sInClause = ""; foreach (string sPlan in lstPlans) { sInClause += "'" + sPlan + "'" + ","; } sInClause = sInClause.Remove(sInClause.LastIndexOf(","), 1); ITable pPlansTable = pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans); int iNameFld = pPlansTable.FindField("Name"); IQueryFilter pQuFilter = new QueryFilterClass(); pQuFilter.WhereClause = "NAME IN (" + sInClause + ")"; ICursor pCur = pPlansTable.Search(pQuFilter, false); List <string> lstPlanReplace = new List <string>(); IRow pPlan = pCur.NextRow(); while (pPlan != null) { lstPlanReplace.Add("<name>" + (string)pPlan.Value[iNameFld] + "</name>\n\t\t<oID>" + pPlan.OID.ToString() + "</oID>"); Marshal.ReleaseComObject(pPlan); pPlan = pCur.NextRow(); } Marshal.ReleaseComObject(pCur); #endregion foreach (String CadastralXMLPath in openFileDialog.FileNames) { if (!pTrkCan.Continue()) { pEd.AbortOperation(); return; } //rename ALL oID tags so that they're ignored. This indicates that these are to be treated as NEW parcels coming in. ReplaceInFile(CadastralXMLPath, sCopiedCadastralXMLFile, "oID>", "old_xxX>"); foreach (string sPlanTag in lstPlanReplace) { string sFirstPart = sPlanTag.Substring(0, sPlanTag.IndexOf("\n")); ReplaceInFile(sCopiedCadastralXMLFile, sCopiedCadastralXMLFile, sFirstPart, sPlanTag); } //TEST ONLY //ReplaceInFile(CadastralXMLPath, sCopiedCadastralXMLFile, "oID>", "oID>"); //IF using PostCadastralPacket the points are not all merged. If using PostCadastralPacket, then a merge-point workaround would be to analyze coordinates //of incoming file and if any are identical to existing fabric coordinates, then make the oID tag match //the oID of the existing point in the target fabric. This will trigger point merging of identical points when using PostCadastralPacket. //code below uses InsertCadastralPacket and so point merging is handled. IXMLStream pStream = new XMLStream(); pStream.LoadFromFile(sCopiedCadastralXMLFile); IFIDSet pFIDSet = null;//new FIDSet(); DateTime localNow = DateTime.Now; string sJobName = Convert.ToString(localNow) + "_" + (iFileCount++).ToString(); // note the create option is to NOT write job to fabric and is in-memory only initially, and then the InsertCadastralPacket will create and store the job in the fabric // IF using PostCadastralPacket, then this option should be set to true, so that the job already exists in the fabric. // Also, when using PostCadastralPacket, you can continue to use the same Target job, and a new one is not needed for each iteration. // With InsertCadastralPacket a job is created for each call when new parcels are being created. if (!CreateCadastralJob(pCadFabric, sJobName, out CadaJob, false, ref bJobExists)) { pEd.AbortOperation(); return; } pProDlg.Description = "File: " + System.IO.Path.GetFileName(CadastralXMLPath) + " (" + iFileCount.ToString() + " of " + iTotalFiles.ToString() + ")"; //(pCadFabric as ICadastralFabric3).PostCadastralPacket(pStream, pTrkCan, esriCadastralPacketSetting.esriCadastralPacketNoSetting, ref pFIDSet); (pCadFabric as ICadastralFabric3).InsertCadastralPacket(CadaJob, pStream, pTrkCan, esriCadastralPacketSetting.esriCadastralPacketNoSetting, ref pFIDSet); //int setCnt = pFIDSet.Count(); } RefreshFabricLayers(ArcMap.Document.ActiveView.FocusMap, pCadFabric); pEd.StopOperation("Append " + iFileCount.ToString() + " cadastral XML files"); } catch (Exception ex) { pEd.AbortOperation(); COMException c_Ex; int errorCode = 0; if (ex is COMException) { c_Ex = (COMException)ex; errorCode = c_Ex.ErrorCode; } if (errorCodeDict.ContainsKey(errorCode)) { MessageBox.Show(errorCodeDict[errorCode], "Append files"); } else { MessageBox.Show("Error: " + ex.Message + Environment.NewLine + ex.HResult.ToString(), "Append files"); } } finally { if (sCopiedCadastralXMLFile != string.Empty) { File.Delete(sCopiedCadastralXMLFile); } if (pProDlg != null) { pProDlg.HideDialog(); } } }
protected override void OnClick() { m_pApp = (IApplication)ArcMap.Application; if (m_pApp == null) { //if the app is null then could be running from ArcCatalog m_pApp = (IApplication)ArcCatalog.Application; } if (m_pApp == null) { MessageBox.Show("Could not access the application.", "No Application found"); return; } IGxApplication pGXApp = (IGxApplication)m_pApp; stdole.IUnknown pUnk = null; try { pUnk = (stdole.IUnknown)pGXApp.SelectedObject.InternalObjectName.Open(); } catch (COMException ex) { if (ex.ErrorCode == (int)fdoError.FDO_E_DATASET_TYPE_NOT_SUPPORTED_IN_RELEASE || ex.ErrorCode == -2147220944) { MessageBox.Show("The dataset is not supported in this release.", "Could not open the dataset"); } else { MessageBox.Show(ex.ErrorCode.ToString(), "Could not open the dataset"); } return; } if (pUnk is ICadastralFabric) { m_pCadaFab = (ICadastralFabric)pUnk; } else { MessageBox.Show("Please select a parcel fabric and try again.", "Not a parcel fabric"); return; } IMouseCursor pMouseCursor = new MouseCursorClass(); pMouseCursor.SetCursor(2); Utils FabricUTILS = new Utils(); ITable pTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); IDataset pDS = (IDataset)pTable; IWorkspace pWS = pDS.Workspace; bool bIsFileBasedGDB = true; bool bIsUnVersioned = true; FabricUTILS.GetFabricPlatform(pWS, m_pCadaFab, out bIsFileBasedGDB, out bIsUnVersioned); //Do a Start and Stop editing to make sure we're not running in an edit session if (!FabricUTILS.StartEditing(pWS, true)) {//if start editing fails then bail if (pUnk != null) { Marshal.ReleaseComObject(pUnk); } Cleanup(pMouseCursor, null, pTable, null, pWS, null); FabricUTILS = null; return; } FabricUTILS.StopEditing(pWS); IFIDSet pPlansToDelete = null; try { string[] SummaryNames = new string[0]; //define as dynamic array string[] RepeatPlans = new string[0]; //define as dynamic array ITable pPlansTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans); //load all the plan names into a string array m_pProgressorDialogFact = new ProgressDialogFactoryClass(); m_pTrackCancel = new CancelTrackerClass(); m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, m_pApp.hWnd); IProgressDialog2 pProgressorDialog = (IProgressDialog2)m_pStepProgressor; int iRowCount = pPlansTable.RowCount(null); m_pStepProgressor.MinRange = 1; m_pStepProgressor.MaxRange = iRowCount * 2; m_pStepProgressor.StepValue = 1; pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral; pProgressorDialog.ShowDialog(); m_pStepProgressor.Message = "Finding same-name plans to merge..."; int iRepeatCnt = 0; if (!FindRepeatPlans(pPlansTable, out RepeatPlans, out SummaryNames, out iRepeatCnt)) { pProgressorDialog.HideDialog(); if (iRepeatCnt == 0) { MessageBox.Show("All plans in the fabric have unique names." + Environment.NewLine + "There are no plans to merge.", "Merge plans by name"); } else { MessageBox.Show("There was a problem searching for repeat plans.", "Merge plans by name"); } SummaryNames = null; RepeatPlans = null; Cleanup(pMouseCursor, null, pTable, pPlansTable, pWS, pProgressorDialog); return; } dlgMergeSameNamePlans TheSummaryDialog = new dlgMergeSameNamePlans(); FillTheSummaryList(TheSummaryDialog, SummaryNames); DialogResult dResult = TheSummaryDialog.ShowDialog(); if (dResult == DialogResult.Cancel) { pProgressorDialog.HideDialog(); SummaryNames = null; RepeatPlans = null; Cleanup(pMouseCursor, null, pTable, pPlansTable, pWS, pProgressorDialog); pPlansTable = null; return; } //get the time now m_pStartTime = new TimeClass(); m_pStartTime.SetFromCurrentLocalTime(); Dictionary <int, int> Lookup = new Dictionary <int, int>(); string[] InClause = new string[0]; //define as dynamic array m_pStepProgressor.Message = "Creating the merge query..."; FabricUTILS.BuildSearchMapAndQuery(RepeatPlans, out Lookup, out InClause, out pPlansToDelete); ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)m_pCadaFab; ITable ParcelTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); pSchemaEd.ReleaseReadOnlyFields(ParcelTable, esriCadastralFabricTable.esriCFTParcels); //release safety-catch if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned)) { Cleanup(pMouseCursor, pPlansToDelete, pTable, pPlansTable, pWS, pProgressorDialog); InClause = null; Lookup.Clear(); Lookup = null; return; } //setup progressor dialog for merge m_pStepProgressor.Message = "Moving parcels from source to target plans..."; if (!FabricUTILS.MergePlans(ParcelTable, Lookup, InClause, bIsUnVersioned, m_pStepProgressor, m_pTrackCancel)) { FabricUTILS.AbortEditing(pWS); pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels); Cleanup(pMouseCursor, pPlansToDelete, pTable, pPlansTable, pWS, pProgressorDialog); InClause = null; Lookup.Clear(); Lookup = null; return; } if (TheSummaryDialog.checkBox1.Checked) { //setup progressor dialog for Delete m_pStepProgressor.MaxRange = pPlansToDelete.Count(); m_pStepProgressor.Message = "Deleting source plans..."; if (bIsUnVersioned) { if (!FabricUTILS.DeleteRowsUnversioned(pWS, pPlansTable, pPlansToDelete, m_pStepProgressor, m_pTrackCancel)) { Cleanup(pMouseCursor, pPlansToDelete, pTable, pPlansTable, pWS, pProgressorDialog); } } else { if (!FabricUTILS.DeleteRowsByFIDSet(pPlansTable, pPlansToDelete, m_pStepProgressor, m_pTrackCancel)) { Cleanup(pMouseCursor, pPlansToDelete, pTable, pPlansTable, pWS, pProgressorDialog); } } } pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels); m_pEndTime = new TimeClass(); m_pEndTime.SetFromCurrentLocalTime(); ITimeDuration HowLong = m_pEndTime.SubtractTime(m_pStartTime); m_pStepProgressor.Message = "[" + HowLong.Hours.ToString("00") + "h " + HowLong.Minutes.ToString("00") + "m " + HowLong.Seconds.ToString("00") + "s]" + " Saving changes...please wait."; FabricUTILS.StopEditing(pWS); Cleanup(pMouseCursor, pPlansToDelete, pTable, pPlansTable, pWS, pProgressorDialog); } catch (COMException ex) { MessageBox.Show(Convert.ToString(ex.ErrorCode)); Cleanup(pMouseCursor, pPlansToDelete, pTable, null, pWS, null); } }
protected override void OnClick() { bool bShowProgressor = false; IStepProgressor pStepProgressor = null; //Create a CancelTracker. ITrackCancel pTrackCancel = null; IProgressDialogFactory pProgressorDialogFact; IMouseCursor pMouseCursor = new MouseCursorClass(); pMouseCursor.SetCursor(2); //first get the selected parcel features UID pUID = new UIDClass(); pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}"; ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID); ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID); //check if there is a Manual Mode "modify" job active =========== ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan; if (pCadPacMan.PacketOpen) { MessageBox.Show("The Delete Control command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.", "Delete Selected Control"); return; } IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor"); IActiveView pActiveView = ArcMap.Document.ActiveView; IMap pMap = pActiveView.FocusMap; ICadastralFabric pCadFabric = null; clsFabricUtils FabricUTILS = new clsFabricUtils(); IProgressDialog2 pProgressorDialog = null; //if we're in an edit session then grab the target fabric if (pEd.EditState == esriEditState.esriStateEditing) { pCadFabric = pCadEd.CadastralFabric; } if (pCadFabric == null) {//find the first fabric in the map if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric)) { MessageBox.Show ("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again."); return; } } IArray CFControlLayers = new ArrayClass(); if (!(FabricUTILS.GetControlLayersFromFabric(pMap, pCadFabric, out CFControlLayers))) { return; //no fabric sublayers available for the targeted fabric } bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false; IWorkspace pWS = null; ITable pPointsTable = null; ITable pControlTable = null; try { if (pEd.EditState == esriEditState.esriStateEditing) { try { pEd.StartOperation(); } catch { pEd.AbortOperation();//abort any open edit operations and try again pEd.StartOperation(); } } IFeatureLayer pFL = (IFeatureLayer)CFControlLayers.get_Element(0); IDataset pDS = (IDataset)pFL.FeatureClass; pWS = pDS.Workspace; if (!FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB, out bIsUnVersioned, out bUseNonVersionedDelete)) { return; } //loop through each control layer and //Get the selection of control int iCnt = 0; int iTotalSelectionCount = 0; for (; iCnt < CFControlLayers.Count; iCnt++) { pFL = (IFeatureLayer)CFControlLayers.get_Element(iCnt); IFeatureSelection pFeatSel = (IFeatureSelection)pFL; ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet; iTotalSelectionCount += pSelSet.Count; } if (iTotalSelectionCount == 0) { MessageBox.Show("Please select some fabric control points and try again.", "No Selection", MessageBoxButtons.OK, MessageBoxIcon.Information); if (bUseNonVersionedDelete) { pCadEd.CadastralFabricLayer = null; CFControlLayers = null; } return; } bShowProgressor = (iTotalSelectionCount > 10); if (bShowProgressor) { pProgressorDialogFact = new ProgressDialogFactoryClass(); pTrackCancel = new CancelTrackerClass(); pStepProgressor = pProgressorDialogFact.Create(pTrackCancel, ArcMap.Application.hWnd); pProgressorDialog = (IProgressDialog2)pStepProgressor; pStepProgressor.MinRange = 1; pStepProgressor.MaxRange = iTotalSelectionCount * 2; //(runs through selection twice) pStepProgressor.StepValue = 1; pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral; } //loop through each control layer and //delete from its selection m_pQF = new QueryFilterClass(); iCnt = 0; for (; iCnt < CFControlLayers.Count; iCnt++) { pFL = (IFeatureLayer)CFControlLayers.get_Element(iCnt); IFeatureSelection pFeatSel = (IFeatureSelection)pFL; ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet; ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS; string sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix); string sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix); if (bShowProgressor) { pProgressorDialog.ShowDialog(); pStepProgressor.Message = "Collecting Control point data..."; } //Add the OIDs of all the selected control points into a new feature IDSet string[] sOIDListPoints = { "(" }; int tokenLimit = 995; //int tokenLimit = 5; //temp for testing bool bCont = true; int j = 0; int iCounter = 0; m_pFIDSetControl = new FIDSetClass(); ICursor pCursor = null; pSelSet.Search(null, false, out pCursor);//code deletes all selected control points IFeatureCursor pControlFeatCurs = (IFeatureCursor)pCursor; IFeature pControlFeat = pControlFeatCurs.NextFeature(); int iPointID = pControlFeatCurs.FindField("POINTID"); while (pControlFeat != null) { //Check if the cancel button was pressed. If so, stop process if (bShowProgressor) { bCont = pTrackCancel.Continue(); if (!bCont) { break; } } bool bExists = false; m_pFIDSetControl.Find(pControlFeat.OID, out bExists); if (!bExists) { m_pFIDSetControl.Add(pControlFeat.OID); object obj = pControlFeat.get_Value(iPointID); if (iCounter <= tokenLimit) { //if the PointID is not null add it to a query string as well if (obj != DBNull.Value) { sOIDListPoints[j] += Convert.ToString(obj) + ","; } iCounter++; } else {//maximum tokens reached //set up the next OIDList sOIDListPoints[j] = sOIDListPoints[j].Trim(); iCounter = 0; j++; FabricUTILS.RedimPreserveString(ref sOIDListPoints, 1); sOIDListPoints[j] = "("; if (obj != DBNull.Value) { sOIDListPoints[j] += Convert.ToString(obj) + ","; } } } Marshal.ReleaseComObject(pControlFeat); //garbage collection pControlFeat = pControlFeatCurs.NextFeature(); if (bShowProgressor) { if (pStepProgressor.Position < pStepProgressor.MaxRange) { pStepProgressor.Step(); } } } Marshal.ReleaseComObject(pCursor); //garbage collection if (!bCont) { AbortEdits(bUseNonVersionedDelete, pEd, pWS); return; } if (bUseNonVersionedDelete) { if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned)) { if (bUseNonVersionedDelete) { pCadEd.CadastralFabricLayer = null; } return; } } //first delete all the control point records if (bShowProgressor) { pStepProgressor.Message = "Deleting control points..."; } bool bSuccess = true; pPointsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints); pControlTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTControl); if (!bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsByFIDSet(pControlTable, m_pFIDSetControl, pStepProgressor, pTrackCancel); } if (bUseNonVersionedDelete) { bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pControlTable, m_pFIDSetControl, pStepProgressor, pTrackCancel); } if (!bSuccess) { AbortEdits(bUseNonVersionedDelete, pEd, pWS); return; } //next need to use an in clause to update the points, ... ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric; //...for each item in the sOIDListPoints array foreach (string inClause in sOIDListPoints) { string sClause = inClause.Trim().TrimEnd(','); if (sClause.EndsWith("(")) { continue; } if (sClause.Length < 3) { continue; } pSchemaEd.ReleaseReadOnlyFields(pPointsTable, esriCadastralFabricTable.esriCFTPoints); m_pQF.WhereClause = (sPref + pPointsTable.OIDFieldName + sSuff).Trim() + " IN " + sClause + ")"; if (!FabricUTILS.ResetPointAssociations(pPointsTable, m_pQF, bIsUnVersioned)) { pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints); return; } pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints); } } if (bUseNonVersionedDelete) { FabricUTILS.StopEditing(pWS); } if (pEd.EditState == esriEditState.esriStateEditing) { pEd.StopOperation("Delete Control Points"); } } catch (Exception ex) { MessageBox.Show(ex.Message); return; } finally { RefreshMap(pActiveView, CFControlLayers); //update the TOC IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document); for (int i = 0; i < mxDocument.ContentsViewCount; i++) { IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i); pCV.Refresh(null); } if (pProgressorDialog != null) { pProgressorDialog.HideDialog(); } if (bUseNonVersionedDelete) { pCadEd.CadastralFabricLayer = null; CFControlLayers = null; } if (pMouseCursor != null) { pMouseCursor.SetCursor(0); } } }
protected override void OnClick() { m_pApp = (IApplication)ArcMap.Application; if (m_pApp == null) { //if the app is null then could be running from ArcCatalog m_pApp = (IApplication)ArcCatalog.Application; } if (m_pApp == null) { MessageBox.Show("Could not access the application.", "No Application found"); return; } IGxApplication pGXApp = (IGxApplication)m_pApp; stdole.IUnknown pUnk = null; try { pUnk = (stdole.IUnknown)pGXApp.SelectedObject.InternalObjectName.Open(); } catch (COMException ex) { if (ex.ErrorCode == (int)fdoError.FDO_E_DATASET_TYPE_NOT_SUPPORTED_IN_RELEASE || ex.ErrorCode == -2147220944) { MessageBox.Show("The dataset is not supported in this release.", "Could not open the dataset"); } else { MessageBox.Show(ex.ErrorCode.ToString(), "Could not open the dataset"); } return; } if (pUnk is ICadastralFabric) { m_pCadaFab = (ICadastralFabric)pUnk; } else { MessageBox.Show("Please select a parcel fabric and try again.", "Not a parcel fabric"); return; } IMouseCursor pMouseCursor = new MouseCursorClass(); pMouseCursor.SetCursor(2); Utils FabricUTILS = new Utils(); ITable pTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); IDataset pDS = (IDataset)pTable; IWorkspace pWS = pDS.Workspace; bool bIsFileBasedGDB = true; bool bIsUnVersioned = true; FabricUTILS.GetFabricPlatform(pWS, m_pCadaFab, out bIsFileBasedGDB, out bIsUnVersioned); //Do a Start and Stop editing to make sure we're not running in an edit session if (!FabricUTILS.StartEditing(pWS, true)) {//if start editing fails then bail if (pUnk != null) { Marshal.ReleaseComObject(pUnk); } Cleanup(pMouseCursor, null, pTable, null, pWS, null, true); FabricUTILS = null; return; } FabricUTILS.StopEditing(pWS); ITable pPlansTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans); ITable pParcelsTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); m_pProgressorDialogFact = new ProgressDialogFactoryClass(); m_pTrackCancel = new CancelTrackerClass(); m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, m_pApp.hWnd); IProgressDialog2 pProgressorDialog = (IProgressDialog2)m_pStepProgressor; int iRowCount = pPlansTable.RowCount(null); int iRowCount2 = pParcelsTable.RowCount(null); m_pStepProgressor.MinRange = 1; m_pStepProgressor.MaxRange = iRowCount + iRowCount2; m_pStepProgressor.StepValue = 1; pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral; pProgressorDialog.ShowDialog(); m_pStepProgressor.Message = "Searching " + iRowCount2.ToString() + " parcel records..."; int iFixCnt = 0; //load all the plan names into a string array ArrayList NoPlanParcels = new ArrayList(); ArrayList NoPlanParcelsGrouped = new ArrayList(); ArrayList PlansList = new ArrayList(); Dictionary <int, int> ParcelLookup = new Dictionary <int, int>(); if (!FindNoPlanParcels(pPlansTable, pParcelsTable, ref PlansList, ref NoPlanParcels, ref NoPlanParcelsGrouped, ref ParcelLookup, out iFixCnt)) { pProgressorDialog.HideDialog(); if (iFixCnt > 0) { MessageBox.Show("Canceled searching for parcels with no plan.", "Fix Parcels With No Name"); } NoPlanParcels = null; Cleanup(pMouseCursor, null, pTable, pPlansTable, pWS, pProgressorDialog, true); return; } m_pStepProgressor.Message = "Search complete."; NoPlanParcels.Sort(); dlgFixParcelsWithNoPlan MissingPlansDialog = new dlgFixParcelsWithNoPlan(); FillTheList(MissingPlansDialog.listView1, NoPlanParcels); FillTheList(MissingPlansDialog.listViewByGroup, NoPlanParcelsGrouped); FillTheListBox(MissingPlansDialog.listPlans, PlansList); MissingPlansDialog.ThePlansList = PlansList; MissingPlansDialog.label1.Text = "Found " + iFixCnt.ToString() + " parcels that have a missing plan record."; MissingPlansDialog.lblSelectionCount.Text = "(" + iFixCnt.ToString() + " of " + iFixCnt.ToString() + " selected to fix)"; //cleanup Cleanup(null, null, null, null, null, pProgressorDialog, false); DialogResult dResult = MissingPlansDialog.ShowDialog(); if (dResult == DialogResult.Cancel) { Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true); return; } //re-initilize the progressor m_pProgressorDialogFact = new ProgressDialogFactoryClass(); m_pTrackCancel = new CancelTrackerClass(); m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, m_pApp.hWnd); pProgressorDialog = (IProgressDialog2)m_pStepProgressor; m_pStepProgressor.MinRange = 1; m_pStepProgressor.MaxRange = MissingPlansDialog.listView1.CheckedItems.Count; m_pStepProgressor.StepValue = 1; pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral; pProgressorDialog.ShowDialog(); m_pStepProgressor.Message = "Fixing parcels without a plan..."; if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned)) { pProgressorDialog.HideDialog(); Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true); FabricUTILS = null; return; } int iNewPlanID = 0; //Need to collect the choices from the UI and write the results to the DB ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)m_pCadaFab; if (MissingPlansDialog.radioBtnExistingPlan.Checked) {//Get the id of the EXISTING Plan string sPlanString = MissingPlansDialog.listPlans.SelectedItem.ToString(); string[] sPlanOID = Regex.Split(sPlanString, "oid:"); sPlanOID[1].Trim(); iNewPlanID = Convert.ToInt32(sPlanOID[1].Remove(sPlanOID[1].LastIndexOf(")"))); } Dictionary <string, int> PlanLookUp = new Dictionary <string, int>(); ArrayList iUnitsAndFormat = new ArrayList(); iUnitsAndFormat.Add(m_AngleUnits); iUnitsAndFormat.Add(m_AreaUnits); iUnitsAndFormat.Add(m_DistanceUnits); iUnitsAndFormat.Add(m_DirectionFormat); iUnitsAndFormat.Add(m_LineParams); if (MissingPlansDialog.radioBtnUserDef.Checked) { //create a NEW plan named with user's entered text ArrayList sPlanInserts = new ArrayList(); pSchemaEd.ReleaseReadOnlyFields(pPlansTable, esriCadastralFabricTable.esriCFTPlans); //release safety-catch sPlanInserts.Add(MissingPlansDialog.txtPlanName.Text); FabricUTILS.InsertPlanRecords(pPlansTable, sPlanInserts, iUnitsAndFormat, PlansList, bIsUnVersioned, null, null, ref PlanLookUp); if (!PlanLookUp.TryGetValue(MissingPlansDialog.txtPlanName.Text, out iNewPlanID)) { Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true); FabricUTILS = null; return; } } if (MissingPlansDialog.radioBtnPlanID.Checked) {//create multiple new plans for each PlanID ArrayList sPlanInserts = new ArrayList(); foreach (ListViewItem listItem in MissingPlansDialog.listViewByGroup.CheckedItems) { sPlanInserts.Add("[" + listItem.SubItems[0].Text + "]"); } pSchemaEd.ReleaseReadOnlyFields(pPlansTable, esriCadastralFabricTable.esriCFTPlans); //release safety-catch FabricUTILS.InsertPlanRecords(pPlansTable, sPlanInserts, iUnitsAndFormat, PlansList, bIsUnVersioned, null, null, ref PlanLookUp); } ArrayList sParcelUpdates = new ArrayList(); sParcelUpdates.Add(""); int i = 0; int iCnt = 0; int iTokenLimit = 995; foreach (ListViewItem listItem in MissingPlansDialog.listView1.CheckedItems) { string s = listItem.SubItems[1].Text; string[] sItems = Regex.Split(s, "id:"); if (iCnt >= iTokenLimit) //time to start a new row { sParcelUpdates.Add(""); //add a new item to the arraylist iCnt = 0; //reset token counter i++; //increment array index } sItems[1] = sItems[1].Remove(sItems[1].LastIndexOf(")")); if (iCnt == 0) { sParcelUpdates[i] += sItems[1]; } else { sParcelUpdates[i] += "," + sItems[1]; } iCnt++; } //============edit block========== try { pSchemaEd.ReleaseReadOnlyFields(pTable, esriCadastralFabricTable.esriCFTParcels); //release safety-catch if (MissingPlansDialog.radioBtnUserDef.Checked || MissingPlansDialog.radioBtnExistingPlan.Checked) { if (!FabricUTILS.UpdateParcelRecords(pTable, sParcelUpdates, iNewPlanID, bIsUnVersioned, m_pStepProgressor, m_pTrackCancel)) { pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels); pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPlans); FabricUTILS.AbortEditing(pWS); Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true); FabricUTILS = null; return; } } if (MissingPlansDialog.radioBtnPlanID.Checked) { if (!FabricUTILS.UpdateParcelRecordsByPlanGroup(pTable, sParcelUpdates, PlanLookUp, ParcelLookup, bIsUnVersioned, m_pStepProgressor, m_pTrackCancel)) { pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels); pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPlans); FabricUTILS.AbortEditing(pWS); Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true); FabricUTILS = null; return; } } pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels); pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPlans); FabricUTILS.StopEditing(pWS); //Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true); //FabricUTILS = null; } catch (COMException Ex) { MessageBox.Show(Ex.ErrorCode.ToString() + ":" + Ex.Message, "Fix Missing Plans"); } finally { Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true); FabricUTILS = null; } }
protected override void OnClick() { m_pApp = (IApplication)ArcMap.Application; if (m_pApp == null) { //if the app is null then could be running from ArcCatalog m_pApp = (IApplication)ArcCatalog.Application; } if (m_pApp == null) { MessageBox.Show("Could not access the application.", "No Application found"); return; } IGxApplication pGXApp = (IGxApplication)m_pApp; stdole.IUnknown pUnk = null; try { pUnk = (stdole.IUnknown)pGXApp.SelectedObject.InternalObjectName.Open(); } catch (COMException ex) { if (ex.ErrorCode == (int)fdoError.FDO_E_DATASET_TYPE_NOT_SUPPORTED_IN_RELEASE || ex.ErrorCode == -2147220944) { MessageBox.Show("The dataset is not supported in this release.", "Could not open the dataset"); } else { MessageBox.Show(ex.ErrorCode.ToString(), "Could not open the dataset"); } return; } if (pUnk is ICadastralFabric) { m_pCadaFab = (ICadastralFabric)pUnk; } else { MessageBox.Show("Please select a parcel fabric and try again.", "Not a parcel fabric"); return; } IMouseCursor pMouseCursor = new MouseCursorClass(); pMouseCursor.SetCursor(2); clsFabricUtils FabricUTILS = new clsFabricUtils(); IProgressDialog2 pProgressorDialog = null; ITable pTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); IDataset pDS = (IDataset)pTable; IWorkspace pWS = pDS.Workspace; bool bIsFileBasedGDB = true; bool bIsUnVersioned = true; FabricUTILS.GetFabricPlatform(pWS, m_pCadaFab, out bIsFileBasedGDB, out bIsUnVersioned); if (!bIsFileBasedGDB && !bIsUnVersioned) { MessageBox.Show("Truncate operates on non-versioned fabrics." + Environment.NewLine + "Please unversion the fabric and try again.", "Tables are versioned"); return; } //Do a Start and Stop editing to make sure truncate it not running within an edit session if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned)) {//if start editing fails then bail Cleanup(pProgressorDialog, pMouseCursor); return; } FabricUTILS.StopEditing(pWS); dlgTruncate pTruncateDialog = new dlgTruncate(); IArray TableArray = new ESRI.ArcGIS.esriSystem.ArrayClass(); pTruncateDialog.TheFabric = m_pCadaFab; pTruncateDialog.TheTableArray = TableArray; //Display the dialog DialogResult pDialogResult = pTruncateDialog.ShowDialog(); if (pDialogResult != DialogResult.OK) { pTruncateDialog = null; if (TableArray != null) { TableArray.RemoveAll(); } return; } m_pProgressorDialogFact = new ProgressDialogFactoryClass(); m_pTrackCancel = new CancelTrackerClass(); m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, m_pApp.hWnd); pProgressorDialog = (IProgressDialog2)m_pStepProgressor; m_pStepProgressor.MinRange = 0; m_pStepProgressor.MaxRange = pTruncateDialog.DropRowCount; m_pStepProgressor.StepValue = 1; pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral; bool bSuccess = false; int iControlRowCount = 0; //look in registry to get flag on whether to run truncate on standard tables, or to delete by row. string sDesktopVers = FabricUTILS.GetDesktopVersionFromRegistry(); if (sDesktopVers.Trim() == "") { sDesktopVers = "Desktop10.0"; } else { sDesktopVers = "Desktop" + sDesktopVers; } bool bDeleteTablesByRowInsteadOfTruncate = false; string sValues = FabricUTILS.ReadFromRegistry(RegistryHive.CurrentUser, "Software\\ESRI\\" + sDesktopVers + "\\ArcMap\\Cadastral", "AddIn.DeleteFabricRecords_Truncate"); if (sValues.Trim().ToLower() == "deletebytruncateonstandardtables" || bIsFileBasedGDB) { bDeleteTablesByRowInsteadOfTruncate = false; } if (sValues.Trim().ToLower() == "deletebyrowonstandardtables") { bDeleteTablesByRowInsteadOfTruncate = true; } if (pTruncateDialog.TruncateControl && !pTruncateDialog.TruncateParcelsLinesPoints) { // get the control point count ITable pControlTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTControl); iControlRowCount = pControlTable.RowCount(null); } try { //Work on the table array pTable = null; m_pFIDSet = new FIDSetClass(); for (int i = 0; i <= TableArray.Count - 1; i++) { //if (TableArray.get_Element(i) is ITable) ...redundant { pTable = (ITable)TableArray.get_Element(i); IDataset pDataSet = (IDataset)pTable; //Following code uses the truncate method //*** if (pTable is IFeatureClass || !bDeleteTablesByRowInsteadOfTruncate) { ITableWrite2 pTableWr = (ITableWrite2)pTable; m_pStepProgressor.Message = "Deleting all rows in " + pDataSet.Name; int RowCnt = pTable.RowCount(null); pTableWr.Truncate(); m_pStepProgressor.MaxRange -= RowCnt; //now re-insert the default plan string sName = pDataSet.Name.ToUpper().Trim(); if (sName.EndsWith("_PLANS")) { int idxPlanName = pTable.FindField("Name"); int idxPlanDescription = pTable.FindField("Description"); int idxPlanAngleUnits = pTable.FindField("AngleUnits"); int idxPlanAreaUnits = pTable.FindField("AreaUnits"); int idxPlanDistanceUnits = pTable.FindField("DistanceUnits"); int idxPlanDirectionFormat = pTable.FindField("DirectionFormat"); int idxPlanLineParameters = pTable.FindField("LineParameters"); int idxPlanCombinedGridFactor = pTable.FindField("CombinedGridFactor"); int idxPlanTrueMidBrg = pTable.FindField("TrueMidBrg"); int idxPlanAccuracy = pTable.FindField("Accuracy"); int idxPlanInternalAngles = pTable.FindField("InternalAngles"); ICursor pCur = pTableWr.InsertRows(false); IRowBuffer pRowBuff = pTable.CreateRowBuffer(); double dOneMeterEquals = FabricUTILS.ConvertMetersToFabricUnits(1, m_pCadaFab); bool bIsMetric = (dOneMeterEquals == 1); //write category 1 pRowBuff.set_Value(idxPlanName, "<map>"); pRowBuff.set_Value(idxPlanDescription, "System default plan"); pRowBuff.set_Value(idxPlanAngleUnits, 3); // if (bIsMetric) { pRowBuff.set_Value(idxPlanAreaUnits, 5); pRowBuff.set_Value(idxPlanDistanceUnits, 9001); pRowBuff.set_Value(idxPlanDirectionFormat, 1); } else { pRowBuff.set_Value(idxPlanAreaUnits, 4); pRowBuff.set_Value(idxPlanDistanceUnits, 9003); pRowBuff.set_Value(idxPlanDirectionFormat, 4); } pRowBuff.set_Value(idxPlanLineParameters, 4); pRowBuff.set_Value(idxPlanCombinedGridFactor, 1); //pRowBuff.set_Value(idxPlanTrueMidBrg, 1); pRowBuff.set_Value(idxPlanAccuracy, 4); pRowBuff.set_Value(idxPlanInternalAngles, 0); pCur.InsertRow(pRowBuff); pCur.Flush(); if (pRowBuff != null) { Marshal.ReleaseComObject(pRowBuff); } if (pCur != null) { Marshal.ReleaseComObject(pCur); } } } } } } catch (COMException ex) { MessageBox.Show(ex.Message + ": " + Convert.ToString(ex.ErrorCode)); Cleanup(pProgressorDialog, pMouseCursor); return; } //do the loop again, this time within the edit transaction and using the delete function for the chosen tables try { //Start an Edit Transaction if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned)) {//if start editing fails then bail Cleanup(pProgressorDialog, pMouseCursor); return; } for (int i = 0; i <= TableArray.Count - 1; i++) { //if (TableArray.get_Element(i) is ITable) { pTable = (ITable)TableArray.get_Element(i); IDataset pDataSet = (IDataset)pTable; if (pTable is IFeatureClass || !bDeleteTablesByRowInsteadOfTruncate) { } else { //The following code is in place to workaround a limitation of truncate for fabric classes //without a shapefield. It uses an alternative method for removing all the rows //with the Delete function. //General note: This method could be used exclusively, without needing the truncate method. //One advantage is that it allows the option to cancel the whole //operation using the cancel tracker. Truncate is faster, but is problematic if //the truncate fails, and leaves a partially deleted fabric. For example, if the //lines table is deleted but the points table truncate fails, the fabric would be in a //corrupt state. //**** m_pFIDSet.SetEmpty(); string sName = pDataSet.Name.ToUpper().Trim(); m_pStepProgressor.Message = "Loading rows from " + pDataSet.Name; if (sName.EndsWith("_PLANS")) {//for Plans table make sure the default plan is not deleted IQueryFilter pQF = new QueryFilterClass(); string sPref; string sSuff; ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS; sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix); sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix); string sFieldName = "NAME"; //pQF.WhereClause = sPref + sFieldName + sSuff + " <> '<map>'"; pQF.WhereClause = sFieldName + " <> '<map>'"; if (!BuildFIDSetFromTable(pTable, pQF, ref m_pFIDSet)) { FabricUTILS.AbortEditing(pWS); Cleanup(pProgressorDialog, pMouseCursor); return; } } else { if (!BuildFIDSetFromTable(pTable, null, ref m_pFIDSet)) { FabricUTILS.AbortEditing(pWS); Cleanup(pProgressorDialog, pMouseCursor); return; } } if (m_pFIDSet.Count() == 0) { continue; } m_pStepProgressor.Message = "Deleting all rows in " + pDataSet.Name; bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pTable, m_pFIDSet, m_pStepProgressor, m_pTrackCancel); if (!bSuccess) { FabricUTILS.AbortEditing(pWS); Cleanup(pProgressorDialog, pMouseCursor); return; } } } } //now need to Fix control-to-point associations if one table was truncated //and the other was not if (pTruncateDialog.TruncateControl && !pTruncateDialog.TruncateParcelsLinesPoints) { IQueryFilter pQF = new QueryFilterClass(); string sPref; string sSuff; ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS; sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix); sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix); ITable PointTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints); m_pStepProgressor.Message = "Resetting control associations on points...please wait."; int idxFld = PointTable.FindField("NAME"); string sFieldName = PointTable.Fields.get_Field(idxFld).Name; //NAME IS NOT NULL AND (NAME <>'' OR NAME <>' ') //pQF.WhereClause = sPref + sFieldName + sSuff + " IS NOT NULL AND (" + // sPref + sFieldName + sSuff + "<>'' OR " + sPref + sFieldName + sSuff + " <>' ')"; //pQF.WhereClause = sFieldName + " IS NOT NULL AND (" + sFieldName + "<>'' OR " + sFieldName + " <>' ')"; pQF.WhereClause = sFieldName + " IS NOT NULL AND " + sFieldName + " > ''"; //changed 1/14/2016 ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)m_pCadaFab; pSchemaEd.ReleaseReadOnlyFields(PointTable, esriCadastralFabricTable.esriCFTPoints); m_pStepProgressor.MinRange = 0; m_pStepProgressor.MaxRange = iControlRowCount; if (!ResetPointAssociations(PointTable, pQF, true, m_pStepProgressor, m_pTrackCancel)) { pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints); FabricUTILS.AbortEditing(pWS); Cleanup(pProgressorDialog, pMouseCursor); return; } pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints); } else if (pTruncateDialog.TruncateParcelsLinesPoints && !pTruncateDialog.TruncateControl) { IQueryFilter pQF = new QueryFilterClass(); string sPref; string sSuff; ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS; sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix); sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix); //POINTID >=0 AND POINTID IS NOT NULL m_pStepProgressor.Message = "Resetting associations on control points...please wait."; ITable ControlTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTControl); int idxFld = ControlTable.FindField("POINTID"); string sFieldName = ControlTable.Fields.get_Field(idxFld).Name; //pQF.WhereClause = sPref + sFieldName + sSuff + " IS NOT NULL AND " + // sPref + sFieldName + sSuff + " >=0"; pQF.WhereClause = sFieldName + " IS NOT NULL AND " + sFieldName + " >=0"; ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)m_pCadaFab; pSchemaEd.ReleaseReadOnlyFields(ControlTable, esriCadastralFabricTable.esriCFTControl); if (!FabricUTILS.ResetControlAssociations(ControlTable, null, true)) { pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl); FabricUTILS.AbortEditing(pWS); Cleanup(pProgressorDialog, pMouseCursor); return; } pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl); } //now need to re-assign default accuracy table values, if the option was checked if (pTruncateDialog.ResetAccuracyTableDefaults) { double dCat1 = FabricUTILS.ConvertMetersToFabricUnits(0.001, m_pCadaFab); double dCat2 = FabricUTILS.ConvertMetersToFabricUnits(0.01, m_pCadaFab); double dCat3 = FabricUTILS.ConvertMetersToFabricUnits(0.02, m_pCadaFab); double dCat4 = FabricUTILS.ConvertMetersToFabricUnits(0.05, m_pCadaFab); double dCat5 = FabricUTILS.ConvertMetersToFabricUnits(0.2, m_pCadaFab); double dCat6 = FabricUTILS.ConvertMetersToFabricUnits(1, m_pCadaFab); double dCat7 = FabricUTILS.ConvertMetersToFabricUnits(10, m_pCadaFab); ITable pAccTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTAccuracy); int idxBrgSD = pAccTable.FindField("BrgSD"); int idxDistSD = pAccTable.FindField("DistSD"); int idxPPM = pAccTable.FindField("PPM"); int idxCategory = pAccTable.FindField("Category"); int idxDescription = pAccTable.FindField("Description"); ITableWrite2 pTableWr = (ITableWrite2)pAccTable; ICursor pCur = pTableWr.InsertRows(false); IRowBuffer pRowBuff = pAccTable.CreateRowBuffer(); //write category 1 pRowBuff.set_Value(idxCategory, 1); pRowBuff.set_Value(idxBrgSD, 5); pRowBuff.set_Value(idxDistSD, dCat1); pRowBuff.set_Value(idxPPM, 5); pRowBuff.set_Value(idxDescription, "1 - Highest"); pCur.InsertRow(pRowBuff); //write category 2 pRowBuff.set_Value(idxCategory, 2); pRowBuff.set_Value(idxBrgSD, 30); pRowBuff.set_Value(idxDistSD, dCat2); pRowBuff.set_Value(idxPPM, 25); pRowBuff.set_Value(idxDescription, "2 - After 1980"); pCur.InsertRow(pRowBuff); //write category 3 pRowBuff.set_Value(idxCategory, 3); pRowBuff.set_Value(idxBrgSD, 60); pRowBuff.set_Value(idxDistSD, dCat3); pRowBuff.set_Value(idxPPM, 50); pRowBuff.set_Value(idxDescription, "3 - 1908 to 1980"); pCur.InsertRow(pRowBuff); //write category 4 pRowBuff.set_Value(idxCategory, 4); pRowBuff.set_Value(idxBrgSD, 120); pRowBuff.set_Value(idxDistSD, dCat4); pRowBuff.set_Value(idxPPM, 125); pRowBuff.set_Value(idxDescription, "4 - 1881 to 1907"); pCur.InsertRow(pRowBuff); //write category 5 pRowBuff.set_Value(idxCategory, 5); pRowBuff.set_Value(idxBrgSD, 300); pRowBuff.set_Value(idxDistSD, dCat5); pRowBuff.set_Value(idxPPM, 125); pRowBuff.set_Value(idxDescription, "5 - Before 1881"); pCur.InsertRow(pRowBuff); //write category 6 pRowBuff.set_Value(idxCategory, 6); pRowBuff.set_Value(idxBrgSD, 3600); pRowBuff.set_Value(idxDistSD, dCat6); pRowBuff.set_Value(idxPPM, 1000); pRowBuff.set_Value(idxDescription, "6 - 1800"); pCur.InsertRow(pRowBuff); //write category 7 pRowBuff.set_Value(idxCategory, 7); pRowBuff.set_Value(idxBrgSD, 6000); pRowBuff.set_Value(idxDistSD, dCat7); pRowBuff.set_Value(idxPPM, 5000); pRowBuff.set_Value(idxDescription, "7 - Lowest"); pCur.InsertRow(pRowBuff); pCur.Flush(); if (pRowBuff != null) { Marshal.ReleaseComObject(pRowBuff); } if (pCur != null) { Marshal.ReleaseComObject(pCur); } } //now need to cleanup the IDSequence table if ALL the tables were truncated if (pTruncateDialog.TruncateControl && pTruncateDialog.TruncateParcelsLinesPoints && pTruncateDialog.TruncateJobs && pTruncateDialog.TruncateAdjustments) { IWorkspace2 pWS2 = (IWorkspace2)pWS; IDataset TheFabricDS = (IDataset)m_pCadaFab; string sFabricName = TheFabricDS.Name; string sName = sFabricName + "_IDSequencer"; bool bExists = pWS2.get_NameExists(esriDatasetType.esriDTTable, sName); IFeatureWorkspace pFWS = (IFeatureWorkspace)pWS; ITable pSequencerTable; if (bExists) { pSequencerTable = pFWS.OpenTable(sName); IFIDSet pFIDSet = new FIDSetClass(); if (BuildFIDSetFromTable(pSequencerTable, null, ref pFIDSet)) { FabricUTILS.DeleteRowsUnversioned(pWS, pSequencerTable, pFIDSet, null, null); } } } Cleanup(pProgressorDialog, pMouseCursor); if (TableArray != null) { TableArray.RemoveAll(); } FabricUTILS.StopEditing(pWS); } catch (Exception ex) { FabricUTILS.AbortEditing(pWS); Cleanup(pProgressorDialog, pMouseCursor); MessageBox.Show(Convert.ToString(ex.Message)); } }
bool FindEmptyPlans(ICadastralFabric Fabric, IStepProgressor StepProgressor, ITrackCancel TrackCancel, out IFIDSet EmptyPlans) { ICursor pPlansCur = null; ICursor pParcelCur = null; IFIDSet pEmptyPlansFIDSet = new FIDSetClass(); List <int> pNonEmptyPlansList = new List <int>(); IDataset pDS = (IDataset)Fabric; IWorkspace pWS = pDS.Workspace; ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS; string sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix); string sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix); try { ITable pPlansTable = Fabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans); ITable pParcelsTable = Fabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); ////build a list of ids for all the plans found via parcels //if a Personal GDB then don't try to use DISTINCT if (pWS.Type == esriWorkspaceType.esriLocalDatabaseWorkspace && pWS.PathName.ToLower().EndsWith(".mdb")) { pParcelCur = pParcelsTable.Search(null, false); } else { IQueryFilter pQuF = new QueryFilterClass(); pQuF.SubFields = "PLANID"; IQueryFilterDefinition2 queryFilterDef = (IQueryFilterDefinition2)pQuF; queryFilterDef.PrefixClause = "DISTINCT PLANID"; pParcelCur = pParcelsTable.Search(pQuF, true); //Recycling set to true } Int32 iPlanIDX = pParcelCur.Fields.FindField("PLANID"); IRow pParcRow = pParcelCur.NextRow(); while (pParcRow != null) { //Create a collection of planIDs from Parcels table that we know are not empty Int32 iPlanID = -1; object Attr_val = pParcRow.get_Value(iPlanIDX); if (Attr_val != DBNull.Value) { iPlanID = (Int32)Attr_val; if (iPlanID > -1) { if (!pNonEmptyPlansList.Contains(iPlanID)) { pNonEmptyPlansList.Add(iPlanID); } } } Marshal.ReleaseComObject(pParcRow); pParcRow = pParcelCur.NextRow(); } if (pParcelCur != null) { Marshal.FinalReleaseComObject(pParcelCur); } pPlansCur = pPlansTable.Search(null, false); IRow pPlanRow = pPlansCur.NextRow(); while (pPlanRow != null) { bool bFound = false; bFound = pNonEmptyPlansList.Contains(pPlanRow.OID); if (!bFound) //This plan was not found in our parcel-referenced plans { //check if this is the default map plan, so it can be excluded from deletion Int32 iPlanNameIDX = pPlanRow.Fields.FindField("NAME"); string sPlanName = (string)pPlanRow.get_Value(iPlanNameIDX); if (sPlanName.ToUpper() != "<MAP>") { pEmptyPlansFIDSet.Add(pPlanRow.OID); } } Marshal.ReleaseComObject(pPlanRow); pPlanRow = pPlansCur.NextRow(); } EmptyPlans = pEmptyPlansFIDSet; return(true); } catch (Exception ex) { MessageBox.Show(Convert.ToString(ex.Message), "Find Empty Plans"); EmptyPlans = null; return(false); } finally { if (pParcelCur != null) { do { }while (Marshal.ReleaseComObject(pParcelCur) > 0); } if (pNonEmptyPlansList != null) { pNonEmptyPlansList.Clear(); pNonEmptyPlansList = null; } if (pParcelCur != null) { do { }while (Marshal.ReleaseComObject(pParcelCur) > 0); } } }
public bool CadastralTableAddFieldV1(ICadastralFabric pCadaFab, esriCadastralFabricTable eTable, esriFieldType FieldType, string FieldName, string FieldAlias, int FieldLength) { ITable pTable = pCadaFab.get_CadastralTable(eTable); // First check to see if a field with this name already exists if (pTable.FindField(FieldName) > -1) { if (pTable != null) { Marshal.ReleaseComObject(pTable); } return(false); } IDatasetComponent pDSComponent = (IDatasetComponent)pCadaFab; IDEDataset pDEDS = pDSComponent.DataElement; IDECadastralFabric pDECadaFab = (IDECadastralFabric)pDEDS; IField2 pField = null; try { //Create a new Field pField = new FieldClass(); //QI for IFieldEdit IFieldEdit2 pFieldEdit = (IFieldEdit2)pField; pFieldEdit.Type_2 = FieldType; pFieldEdit.Editable_2 = true; pFieldEdit.IsNullable_2 = true; pFieldEdit.Name_2 = FieldName; pFieldEdit.AliasName_2 = FieldAlias; pFieldEdit.Length_2 = FieldLength; //'.RasterDef_2 = pRasterDef } catch (COMException ex) { if (pField != null) { Marshal.ReleaseComObject(pField); } MessageBox.Show(ex.Message); return(false); } IArray pArr = pDECadaFab.CadastralTableFieldEdits; bool found = false; int cnt = pArr.Count; ICadastralTableFieldEdits pCadaTableFldEdits = null; IFields pFields = null; for (int i = 0; i <= (cnt - 1); i++) { pCadaTableFldEdits = (ICadastralTableFieldEdits)pArr.get_Element(i); IFieldsEdit pNewFields = new FieldsClass(); int fldCnt = 0; if (pCadaTableFldEdits.CadastralTable == eTable) { pFields = pCadaTableFldEdits.ExtendedAttributeFields; //Copy existing fields if (pFields != null) { fldCnt = pFields.FieldCount; pNewFields.FieldCount_2 = fldCnt + 1; for (int j = 0; j <= (fldCnt - 1); j++) { pNewFields.Field_2[j] = pFields.get_Field(j); } } else { pNewFields.FieldCount_2 = 1; } //Add the new field pNewFields.Field_2[fldCnt] = pField; //reset extended attribute fields pCadaTableFldEdits.ExtendedAttributeFields = pNewFields; found = true; break; } } if (!found) { pCadaTableFldEdits = new CadastralTableFieldEditsClass(); pCadaTableFldEdits.CadastralTable = eTable; //add the field to the table pFields = new FieldsClass(); int fldCnt = pFields.FieldCount; IFieldsEdit pFieldsEdit = (IFieldsEdit)pFields; pFieldsEdit.FieldCount_2 = fldCnt + 1; pFieldsEdit.Field_2[fldCnt] = pField; pCadaTableFldEdits.ExtendedAttributeFields = pFields; pArr.Add(pCadaTableFldEdits); Marshal.ReleaseComObject(pFields); } //Set the CadastralTableFieldEdits property on the DE to the array pDECadaFab.CadastralTableFieldEdits = pArr; // Update the schema ICadastralFabricSchemaEdit pSchemaEd = (ICadastralFabricSchemaEdit)pCadaFab; pSchemaEd.UpdateSchema(pDECadaFab); Marshal.ReleaseComObject(pField); return(true); }
protected override void OnClick() { IEditor m_pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor"); ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension"); if (m_pEd.EditState == esriEditState.esriStateNotEditing) { MessageBox.Show("Please start editing first, and try again.", "Start Editing", MessageBoxButtons.OK, MessageBoxIcon.Information); return; } IArray PolygonLyrArr; IMap pMap = m_pEd.Map; ICadastralFabric pCadFabric = null; //if we're in an edit session then grab the target fabric if (m_pEd.EditState == esriEditState.esriStateEditing) { pCadFabric = pCadEd.CadastralFabric; } if (pCadFabric == null) {//find the first fabric in the map MessageBox.Show ("No Parcel Fabric found in the workspace you're editing.\r\nPlease re-start editing on a workspace with a fabric, and try again.", "No Fabric found", MessageBoxButtons.OK, MessageBoxIcon.Information); return; } Utilities Utils = new Utilities(); if (!Utils.GetFabricSubLayers(pMap, esriCadastralFabricTable.esriCFTParcels, out PolygonLyrArr)) { return; } //check if there is a Manual Mode "modify" job active =========== ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadEd; if (pCadPacMan.PacketOpen) { MessageBox.Show("The Area Calculation does not work when the parcel is open.\r\nPlease close the parcel and try again.", "Calculate Stated Area", MessageBoxButtons.OK, MessageBoxIcon.Information); return; } IActiveView pActiveView = ArcMap.Document.ActiveView; CalcStatedAreaDLG CalcStatedArea = new CalcStatedAreaDLG(); bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedEdit = false; IWorkspace pWS = null; ITable pParcelsTable = null; IProgressDialog2 pProgressorDialog = null; IMouseCursor pMouseCursor = new MouseCursorClass(); pMouseCursor.SetCursor(2); var pTool = ArcMap.Application.CurrentTool; try { IFeatureLayer pFL = (IFeatureLayer)PolygonLyrArr.get_Element(0); IDataset pDS = (IDataset)pFL.FeatureClass; pWS = pDS.Workspace; if (!Utils.SetupEditEnvironment(pWS, pCadFabric, m_pEd, out bIsFileBasedGDB, out bIsUnVersioned, out bUseNonVersionedEdit)) { return; } ICadastralSelection pCadaSel = (ICadastralSelection)pCadEd; IEnumGSParcels pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround IFeatureSelection pFeatSel = (IFeatureSelection)pFL; ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet; if (pCadaSel.SelectedParcelCount == 0 && pSelSet.Count == 0) { MessageBox.Show("Please select some fabric parcels and try again.", "No Selection", MessageBoxButtons.OK, MessageBoxIcon.Information); return; } ArcMap.Application.CurrentTool = null; //Display the dialog DialogResult pDialogResult = CalcStatedArea.ShowDialog(); if (pDialogResult != DialogResult.OK) { return; } m_bShowProgressor = (pSelSet.Count > 10) || pCadaSel.SelectedParcelCount > 10; if (m_bShowProgressor) { m_pProgressorDialogFact = new ProgressDialogFactoryClass(); m_pTrackCancel = new CancelTrackerClass(); m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd); pProgressorDialog = (IProgressDialog2)m_pStepProgressor; m_pStepProgressor.MinRange = 1; m_pStepProgressor.MaxRange = pCadaSel.SelectedParcelCount * 3; //(3 runs through the selection) m_pStepProgressor.StepValue = 1; pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral; } m_pQF = new QueryFilterClass(); string sPref; string sSuff; ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS; sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix); sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix); //====== need to do this for all the parcel sublayers in the map that are part of the target fabric //pEnumGSParcels should take care of this automatically //but need to do this for line sublayer if (m_bShowProgressor) { pProgressorDialog.ShowDialog(); m_pStepProgressor.Message = "Collecting parcel data..."; } //Add the OIDs of all the selected parcels into a new feature IDSet int tokenLimit = 995; List <int> oidList = new List <int>(); Dictionary <int, string> dict_ParcelSelection2CalculatedArea = new Dictionary <int, string>(); pParcelsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels); pEnumGSParcels.Reset(); IGSParcel pGSParcel = pEnumGSParcels.Next(); while (pGSParcel != null) { //Check if the cancel button was pressed. If so, stop process if (m_bShowProgressor) { if (!m_pTrackCancel.Continue()) { break; } } int iDBId = pGSParcel.DatabaseId; if (!oidList.Contains(iDBId)) { oidList.Add(iDBId); } Marshal.ReleaseComObject(pGSParcel); //garbage collection pGSParcel = pEnumGSParcels.Next(); if (m_bShowProgressor) { if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange) { m_pStepProgressor.Step(); } } } Marshal.ReleaseComObject(pEnumGSParcels); //garbage collection if (m_bShowProgressor) { if (!m_pTrackCancel.Continue()) { return; } } string sSuffixUnit = CalcStatedArea.txtSuffix.Text; int iAreaPrec = (int)CalcStatedArea.numDecPlaces.Value; double dSqMPerUnit = 1; if (CalcStatedArea.cboAreaUnit.FindStringExact("Acres") == CalcStatedArea.cboAreaUnit.SelectedIndex) { dSqMPerUnit = 4046.86; } if (CalcStatedArea.cboAreaUnit.FindStringExact("Hectares") == CalcStatedArea.cboAreaUnit.SelectedIndex) { dSqMPerUnit = 10000; } if (CalcStatedArea.cboAreaUnit.FindStringExact("Square Feet") == CalcStatedArea.cboAreaUnit.SelectedIndex) { dSqMPerUnit = 0.09290304; } if (CalcStatedArea.cboAreaUnit.FindStringExact("Square Feet US") == CalcStatedArea.cboAreaUnit.SelectedIndex) { dSqMPerUnit = 0.09290341; } if (m_bShowProgressor) { pProgressorDialog.ShowDialog(); m_pStepProgressor.Message = "Computing areas..."; } List <string> sInClauseList0 = null; m_pQF = new QueryFilterClass(); if (oidList.Count() > 0) { sInClauseList0 = Utils.InClauseFromOIDsList(oidList, tokenLimit); foreach (string sInClause in sInClauseList0) { m_pQF.WhereClause = pParcelsTable.OIDFieldName + " IN (" + sInClause + ")"; CalculateStatedArea(m_pQF, pParcelsTable, pCadEd, m_pEd.Map.SpatialReference, dSqMPerUnit, sSuffixUnit, iAreaPrec, ref dict_ParcelSelection2CalculatedArea, m_pTrackCancel); if (m_bShowProgressor) { if (!m_pTrackCancel.Continue()) { return; } } } } else { return; } if (m_bShowProgressor) { if (!m_pTrackCancel.Continue()) { return; } } #region Create Cadastral Job //string sTime = ""; //if (!bIsUnVersioned && !bIsFileBasedGDB) //{ // //see if parcel locks can be obtained on the selected parcels. First create a job. // DateTime localNow = DateTime.Now; // sTime = Convert.ToString(localNow); // ICadastralJob pJob = new CadastralJobClass(); // pJob.Name = sTime; // pJob.Owner = System.Windows.Forms.SystemInformation.UserName; // pJob.Description = "Interpolate Z values on selected features"; // try // { // Int32 jobId = pCadFabric.CreateJob(pJob); // } // catch (COMException ex) // { // if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS) // { // MessageBox.Show("Job named: '" + pJob.Name + "', already exists"); // } // else // { // MessageBox.Show(ex.Message); // } // return; // } //} #endregion //ILongArray pTempParcelsLongArray = new LongArrayClass(); //List<int> lstParcelChanges = Utils.FIDsetToLongArray(m_pFIDSetParcels, ref pTempParcelsLongArray, ref pParcelIds, m_pStepProgressor); if (m_pEd.EditState == esriEditState.esriStateEditing) { try { m_pEd.StartOperation(); } catch { m_pEd.AbortOperation();//abort any open edit operations and try again m_pEd.StartOperation(); } } if (bUseNonVersionedEdit) { if (!Utils.StartEditing(pWS, bIsUnVersioned)) { return; } } //ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric; //pSchemaEd.ReleaseReadOnlyFields(pParcelsTable, esriCadastralFabricTable.esriCFTParcels); int idxParcelStatedArea = pParcelsTable.FindField("STATEDAREA"); string ParcelStatedAreaFieldName = pParcelsTable.Fields.get_Field(idxParcelStatedArea).Name; if (m_bShowProgressor) { // pProgressorDialog.ShowDialog(); m_pStepProgressor.Message = "Updating parcel areas..."; } IRow pTheFeatRow = null; ICursor pUpdateCursor = null; foreach (string sInClause in sInClauseList0) { m_pQF.WhereClause = pParcelsTable.OIDFieldName + " IN (" + sInClause + ")"; if (bUseNonVersionedEdit) { ITableWrite pTableWr = (ITableWrite)pParcelsTable; //used for unversioned table pUpdateCursor = pTableWr.UpdateRows(m_pQF, false); } else { pUpdateCursor = pParcelsTable.Update(m_pQF, false); } pTheFeatRow = pUpdateCursor.NextRow(); while (pTheFeatRow != null) { string sAreaString = dict_ParcelSelection2CalculatedArea[pTheFeatRow.OID]; pTheFeatRow.set_Value(idxParcelStatedArea, sAreaString); pTheFeatRow.Store(); Marshal.ReleaseComObject(pTheFeatRow); //garbage collection if (m_bShowProgressor) { if (!m_pTrackCancel.Continue()) { break; } } pTheFeatRow = pUpdateCursor.NextRow(); } Marshal.ReleaseComObject(pUpdateCursor); //garbage collection if (m_bShowProgressor) { if (!m_pTrackCancel.Continue()) { break; } } } m_pEd.StopOperation("Calculate Stated Area"); //pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);//set fields back to read-only } catch (Exception ex) { if (m_pEd != null) { AbortEdits(bIsUnVersioned, m_pEd, pWS); } MessageBox.Show(ex.Message); } finally { ArcMap.Application.CurrentTool = pTool; m_pStepProgressor = null; m_pTrackCancel = null; if (pProgressorDialog != null) { pProgressorDialog.HideDialog(); } RefreshMap(pActiveView, PolygonLyrArr); ICadastralExtensionManager pCExMan = (ICadastralExtensionManager)pCadEd; IParcelPropertiesWindow2 pPropW = (IParcelPropertiesWindow2)pCExMan.ParcelPropertiesWindow; pPropW.RefreshAll(); //update the TOC IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document); for (int i = 0; i < mxDocument.ContentsViewCount; i++) { IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i); pCV.Refresh(null); } // refresh the attributes dialog ISelectionEvents pSelEvents = (ISelectionEvents)m_pEd.Map; pSelEvents.SelectionChanged(); if (bUseNonVersionedEdit) { pCadEd.CadastralFabricLayer = null; PolygonLyrArr = null; } if (pMouseCursor != null) { pMouseCursor.SetCursor(0); } } }