void Run()
{
Stopwatch sw = new Stopwatch();
while (true)
{
sw.Restart();
System.Threading.Thread.Sleep(10);
try
{
#region IO
bool[] M2764 = Fx5u_2.ReadMultiM("M2764", 32);
Fx5u.SetMultiM("M2564", M2764);
#endregion
#region 扫码
//扫码（载具）【A轨道】
if (Fx5u_2.ReadM("M2797"))
{
this.Dispatcher.Invoke(new Action(() =>
{
AddMessage("轨道A扫码");
}));
Fx5u_2.SetM("M2797", false);
Fx5u_2.SetMultiM("M2597", new bool[4] {
false, false, false, false
});
ScanA.GetBarCode(ScanAGetBarcodeCallback);
}
//扫码（载具）【B轨道】
if (Fx5u_2.ReadM("M2802"))
{
this.Dispatcher.Invoke(new Action(() =>
{
AddMessage("轨道B扫码");
}));
Fx5u_2.SetM("M2802", false);
Fx5u_2.SetMultiM("M2602", new bool[4] {
false, false, false, false
});
ScanB.GetBarCode(ScanBGetBarcodeCallback);
}
#endregion
#region 大数据读取
//读报警
M300 = Fx5u_2.ReadMultiM("M1100", (ushort)AlarmList.Count);
//读三色灯状态
LampColor = Fx5u_2.ReadW("D200");
#endregion
}
catch
{ }
SWms = sw.ElapsedMilliseconds;
}
}
void ScanBGetBarcodeCallback(string barcode)
{
if (barcode != "Error")
{
Mysql mysql = new Mysql();
if (mysql.Connect())
{
string stm = "SELECT * FROM BODMSG WHERE SCBODBAR = '" + barcode + "' ORDER BY SIDATE DESC LIMIT 0,5";
DataSet ds = mysql.Select(stm);
DataTable dt = ds.Tables["table0"];
if (dt.Rows.Count > 0)
{
if (dt.Rows[0]["STATUS"] == DBNull.Value)
{
this.Dispatcher.Invoke(new Action(() =>
{
AddMessage("板 " + barcode + " 状态栏位为空");
}));
Fx5u_2.SetM("M2605", true);//载具扫码-未测过【B轨道】
}
else
{
if ((string)dt.Rows[0]["STATUS"] == "OFF")
{
this.Dispatcher.Invoke(new Action(() =>
{
AddMessage("板 " + barcode + " 未测试");
}));
Fx5u_2.SetM("M2605", true);//载具扫码-未测过【B轨道】
}
else
{
stm = "SELECT * FROM BARBIND WHERE SCBODBAR = '" + barcode + "' ORDER BY SIDATE DESC LIMIT 0,15";
ds = mysql.Select(stm);
dt = ds.Tables["table0"];
if (dt.Rows.Count == 15)
{
stm = "INSERT INTO BODMSG (SCBODBAR, STATUS) VALUES('" + barcode + "','OFF')";
int rstnum = mysql.executeQuery(stm);
if (rstnum > 0)
{
this.Dispatcher.Invoke(new Action(() =>
{
AddMessage("板 " + barcode + " 解绑");
}));
short[] result = new short[15];
bool checkrst = true;
for (int i = 0; i < 15; i++)
{
DataRow[] drs = dt.Select(string.Format("PCSSER = '{0}'", (i + 1).ToString()));
if (drs.Length == 1)
{
try
{
result[i] = short.Parse((string)drs[0]["RESULT"]);
}
catch (Exception ex)
{
this.Dispatcher.Invoke(new Action(() =>
{
AddMessage(ex.Message);
}));
checkrst = false;
break;
}
}
else
{
this.Dispatcher.Invoke(new Action(() =>
{
AddMessage("板 " + barcode + " 序号 " + (i + 1).ToString() + "索引数 " + drs.Length.ToString());
}));
checkrst = false;
break;
}
}
if (checkrst)
{
string str;
Fx5u_2.WriteMultD("D1020", result);
str = "B_BordInfo;";
for (int i = 0; i < 15; i++)
{
str += result[i].ToString() + ";";
}
str = str.Substring(0, str.Length - 1);
this.Dispatcher.Invoke(new Action(() =>
{
AddMessage(str);
}));
Fx5u_2.SetM("M2604", true);//载具扫码-已测过【B轨道】
}
else
{
Fx5u_2.SetM("M2605", true);//载具扫码-未测过【B轨道】
}
}
else
{
this.Dispatcher.Invoke(new Action(() =>
{
AddMessage("解绑失败");
}));
Fx5u_2.SetM("M2603", true);//载具扫码NG【B轨道】
}
}
else
{
this.Dispatcher.Invoke(new Action(() =>
{
AddMessage("板 " + barcode + " 记录数目不是15");
}));
Fx5u_2.SetM("M2605", true);//载具扫码-未测过【B轨道】
}
}
}
}
else
{
this.Dispatcher.Invoke(new Action(() =>
{
AddMessage("板 " + barcode + " 信息未录入");
}));
Fx5u_2.SetM("M2605", true); //载具扫码-未测过【A轨道】
}
Fx5u_2.SetM("M2602", true); //载具扫码OK【B轨道】
}
mysql.DisConnect();
}
else
{
this.Dispatcher.Invoke(new Action(() =>
{
AddMessage("扫码失败");
}));
Fx5u_2.SetM("M2603", true);//载具扫码NG【B轨道】
}
}
async void CardRun()
{
string MODE = ""; int CardStatus; int cardret = 1; int timetick = 0;
Fx5u_2.SetM("M2606", true);
CardLockFlag = true;
CardLockTime = DateTime.Now;
AddMessage("机台锁定!");
while (true)
{
await Task.Delay(1000);
#region 刷卡
try
{
byte[] buf = new byte[256]; //用来存储卡信息的buff
byte[] snr = 读写器530SDK.CPublic.CharToByte("FF FF FF FF FF FF"); //应该是一种读码格式，照抄即可。
if (true)
{
if (IntPtr.Zero == reader.GetHComm())
{
string COM = Inifile.INIGetStringValue(iniParameterPath, "读卡器", "COM", "COM19").Replace("COM", "");
reader.OpenComm(int.Parse(COM), 9600);
MODE = Inifile.INIGetStringValue(iniParameterPath, "读卡器", "MODE", "3");
}
//刷卡；若刷到卡返回0，没刷到回1。
CardStatus = reader.MF_Read(0, byte.Parse(MODE), 0, 1, ref snr[0], ref buf[0]);
//采用上升沿信号，防止卡放在读卡机上，重复执行查询动作。寄卡放一次，才查询一次，要再查询，需要重新刷卡。
if (cardret != CardStatus)
{
cardret = CardStatus;
if (CardStatus == 0)//刷到卡了
{
string strTmp = "";
//测试发现，卡返回的是16个HEX（十六进制）数，放在byte[]数组内，需要用一下方法转成字符串格式。
for (int i = 0; i < 16; i++)
{
strTmp += string.Format("{0:X2} ", buf[i]);
}
//删除转换后，字符串内的空格。这些HEX字符并不是员工编号字符的编码，需要用读到的字符串在数据库里查找，
//在记录里再匹配员工信息和权限
string barcode = strTmp.Replace(" ", "");
AddMessage("刷卡 " + barcode);
Oracle oraDB = new Oracle("qddb04.eavarytech.com", "mesdb04", "ictdata", "ictdata*168");
if (oraDB.isConnect())
{
string stm = string.Format("SELECT * FROM CAP_TABLE WHERE BARCODE = '{0}'", barcode);
DataSet s = oraDB.executeQuery(stm);
DataTable dt = s.Tables[0];
if (dt.Rows.Count > 0)//查询到数据条目大于0，即查到了
{
//取查到的第一行记录，一般只有1行。如果有多行，也只取第一行。
DataRow dr = dt.Rows[0];
//筛选一下数据，如果我们需要的“工号”、“姓名”和“权限”对应的栏位为空，则数据不合格。
if (dr["OPERATORID"] != DBNull.Value && dr["DATA0"] != DBNull.Value && dr["RESULT"] != DBNull.Value && dr["PARTNUM"] != DBNull.Value)
{
//打印出匹配到的结果，并返回给下位机。
AddMessage("工号 " + (string)dr["OPERATORID"] + " 姓名 " + (string)dr["DATA0"] + " 权限 " + (string)dr["RESULT"]);
if ((string)dr["PARTNUM"] == PM.Text)
{
stm = string.Format("UPDATE CFT_DATA SET BARCODE = '{0}',TRESULT = '{1}',OPERTOR = '{2}',TESTDATE = '{3}',TESTTIME = '{4}',PARTNUM = '{6}' WHERE MNO = '{5}' OR CFT01 = '{5}'",
barcode, (string)dr["RESULT"], (string)dr["OPERATORID"], DateTime.Now.ToString("yyyyMMdd"), DateTime.Now.ToString("HHmmss"), _MACID, (string)dr["PARTNUM"]);
int updaterst = oraDB.executeNonQuery(stm);
AddMessage("更新刷卡机台" + updaterst.ToString());
oraDB.executeNonQuery("COMMIT");
}
else
{
AddMessage("人员信息与料号不符");
}
}
else
{
AddMessage("数据库记录信息不完整");
}
}
else
{
AddMessage("未查询到卡信息");
}
}
oraDB.disconnect();
}
}
}
}
catch (Exception ex)
{
reader.CloseComm();
AddMessage(ex.Message);
}
#endregion
#region 刷卡恢复
if (CardLockFlag)
{
try
{
Oracle oraDB = new Oracle("qddb04.eavarytech.com", "mesdb04", "ictdata", "ictdata*168");
if (oraDB.isConnect())
{
string stm = string.Format("SELECT * FROM CFT_DATA WHERE MNO = '{0}' AND TRESULT = 'PASS' ORDER BY TESTDATE DESC,TESTTIME DESC",
_MACID);
DataSet ds = oraDB.executeQuery(stm);
DataTable dt = ds.Tables[0];
if (dt.Rows.Count > 0)
{
DataRow dr = dt.Rows[0];
string datestr = (string)dr["TESTDATE"];
string timestr = (string)dr["TESTTIME"];
if (datestr.Length == 8 && (timestr.Length == 5 || timestr.Length == 6))
{
if (timestr.Length == 5)
{
timestr = "0" + timestr;
}
string datetimestr = string.Empty;
datetimestr = string.Format("{0}/{1}/{2} {3}:{4}:{5}", datestr.Substring(0, 4), datestr.Substring(4, 2), datestr.Substring(6, 2), timestr.Substring(0, 2), timestr.Substring(2, 2), timestr.Substring(4, 2));
DateTime updatetime = Convert.ToDateTime(datetimestr);
if ((updatetime - CardLockTime).TotalMilliseconds > 0)
{
Fx5u_2.SetM("M2606", false);
CardLockFlag = false;
AddMessage("刷卡成功，解锁");
}
}
}
}
oraDB.disconnect();
}
catch (Exception ex)
{
AddMessage(ex.Message);
}
}
#endregion
#region 锁机
if (!CardLockFlag)
{
if (LampColor != 1)
{
if (timetick++ > 15 * 60)
{
Fx5u_2.SetM("M2606", true);
CardLockFlag = true;
CardLockTime = DateTime.Now;
AddMessage("机台锁定!");
timetick = 0;
}
}
else
{
timetick = 0;
}
}
else
{
timetick = 0;
}
#endregion
}
}
async void UpdateUI()
{
while (true)
{
await Task.Delay(200);
#region 更新界面
if (Fx5u.Connect)
{
EllipsePLCState.Fill = Brushes.Green;
}
else
{
EllipsePLCState.Fill = Brushes.Red;
}
if (Fx5u_2.Connect)
{
EllipsePLCState2.Fill = Brushes.Green;
}
else
{
EllipsePLCState2.Fill = Brushes.Red;
}
CycleText.Text = SWms.ToString() + " ms";
#endregion
#region 换班
if (LastBanci != GetBanci())
{
LastBanci = GetBanci();
Inifile.INIWriteValue(iniParameterPath, "Summary", "LastBanci", LastBanci);
LampGreenElapse = 0;
Inifile.INIWriteValue(iniParameterPath, "BigData", "LampGreenElapse", LampGreenElapse.ToString());
LampGreenFlickerElapse = 0;
Inifile.INIWriteValue(iniParameterPath, "BigData", "LampGreenFlickerElapse", LampGreenFlickerElapse.ToString());
LampYellowElapse = 0;
Inifile.INIWriteValue(iniParameterPath, "BigData", "LampYellowElapse", LampYellowElapse.ToString());
LampYellowFlickerElapse = 0;
Inifile.INIWriteValue(iniParameterPath, "BigData", "LampYellowFlickerElapse", LampYellowFlickerElapse.ToString());
LampRedElapse = 0;
Inifile.INIWriteValue(iniParameterPath, "BigData", "LampRedElapse", LampRedElapse.ToString());
await Task.Run(() =>
{
Mysql mysql = new Mysql();
try
{
int _result = -999;
if (mysql.Connect())
{
string stm = string.Format("INSERT INTO HA_F4_LIGHT (PM,LIGHT_ID,MACID,CLASS,LIGHT,SDATE,STIME,ALARM,TIME_1,TIME_2,TIME_3,TIME_4,TIME_5,GROUP1,TRACK,WORKSTATION) VALUES ('{0}','{1}','{2}','{3}','{4}','{5}','{6}','{7}','0','0','0','0','0','{8}','{9}','{10}')"
, _PM, _LIGHT_ID, _MACID, GetBanci(), LampColor.ToString(), DateTime.Now.ToString("yyyyMMdd"), DateTime.Now.ToString("HHmmss"), "NA", _GROUP1, _TRACK, _WORKSTATION);
_result = mysql.executeQuery(stm);
}
this.Dispatcher.Invoke(new Action(() =>
{
AddMessage("插入数据库灯信号" + _result.ToString());
}));
}
catch (Exception ex)
{
this.Dispatcher.Invoke(new Action(() =>
{
AddMessage(ex.Message);
}));
}
finally
{
mysql.DisConnect();
}
});
Fx5u_2.SetM("M2606", true);
CardLockFlag = true;
CardLockTime = DateTime.Now;
AddMessage("机台锁定!");
AddMessage(LastBanci + " 换班数据清零");
}
#endregion
}
}
