protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Set Data", "Set Data", "Sets Data from the RFEM Model.", Properties.Resources.icon_SetData);
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Nodal Loads", "NLoads", "Nodal Loads to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[0].Parameter.Optional = true;
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "Nodal Loads", "NLoads", "Nodal Loads from the RFEM Model.");
modelDataCount2 = evaluationUnit.Inputs.Count;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "Load Data");
gH_ExtendableMenu.Name = "Load Data";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < modelDataCount2; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
gH_ExtendableMenu.RegisterOutputPlug(evaluationUnit.Outputs[i]);
}
evaluationUnit.RegisterInputParam(new Param_String(), "Model Name", "Model Name", "Segment of the name of the RFEM Model to get information from", GH_ParamAccess.item);
evaluationUnit.Inputs[modelDataCount2].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "advanced");
gH_ExtendableMenu2.Name = "Advanced";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[modelDataCount2]);
}
public override void registerEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit(name(), display_name(), "Disassemble Nodal Supports.");
evaluationUnit.Icon = Properties.Resources.Disassemble_SupportP;
mngr.RegisterUnit(evaluationUnit);
Setup(evaluationUnit);
}
public override void registerEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit(name(), display_name(), "Disassemble Load Combinations.");
evaluationUnit.Icon = Properties.Resources.Disassemble_LoadCombo;
mngr.RegisterUnit(evaluationUnit);
Setup(evaluationUnit);
}
public override void registerEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit(name(), display_name(), "Filter nodal releases.");
evaluationUnit.Icon = Properties.Resources.Filter_NodalRelease;
mngr.RegisterUnit(evaluationUnit);
Setup(evaluationUnit);
}
public override void registerEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit(name(), display_name(), "Filter Result Combos.");
evaluationUnit.Icon = Properties.Resources.icon_RFEM_FilterResultCombination;
mngr.RegisterUnit(evaluationUnit);
Setup(evaluationUnit);
}
public override void registerEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit(name(), display_name(), "Assemble Material.");
evaluationUnit.Icon = Properties.Resources.Assemble_Material;
mngr.RegisterUnit(evaluationUnit);
Setup(evaluationUnit);
}
public override void registerEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit(name(), display_name(), "Extrude Members as NURBS.");
evaluationUnit.Icon = Properties.Resources.Extrude_Members;
mngr.RegisterUnit(evaluationUnit);
Setup(evaluationUnit);
}
public override void registerEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit(name(), display_name(), "Filter nodal supports.");
evaluationUnit.Icon = Properties.Resources.icon_RFEM_FilterSupportP;
mngr.RegisterUnit(evaluationUnit);
Setup(evaluationUnit);
}
public override void registerEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit(name(), display_name(), "Filter free polygon loads.");
evaluationUnit.Icon = Properties.Resources.icon_FilterPolyLoad;
mngr.RegisterUnit(evaluationUnit);
Setup(evaluationUnit);
}
public override void registerEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit(name(), display_name(), "Disassemble Member Hinges.");
evaluationUnit.Icon = Properties.Resources.Disassemble_MemberRelease;
mngr.RegisterUnit(evaluationUnit);
Setup(evaluationUnit);
}
public override void registerEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit(name(), display_name(), "Assemble Free Polygon Loads.");
evaluationUnit.Icon = Properties.Resources.Assemble_PolyLoad;
mngr.RegisterUnit(evaluationUnit);
Setup(evaluationUnit);
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Assemble Member", "Member", "Creates a RFMember object to define new data or modify existing data " +
"in the RFEM model.");
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_Integer(), "LineNo", "LineNo", "Line Number", GH_ParamAccess.item);
evaluationUnit.RegisterInputParam(new Param_Integer(), "LineNo", "LineNo", "Line Number", GH_ParamAccess.item);
evaluationUnit.Inputs[0].Parameter.Optional = true;
// evaluationUnit.RegisterInputParam(new Param_String(), "Member Type", "Type", UtilLibrary.DescriptionRFTypes(typeof(MemberType)), GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "Rotation Angle [°]", "β", "Rotation Angle [°]", GH_ParamAccess.item);
evaluationUnit.Inputs[2].Parameter.Optional = true;
//evaluationUnit.RegisterInputParam(new Param_Integer(), "Interpolated Points", "n", "Number of interpolated points for NURBS", GH_ParamAccess.item);
//evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Integer(), "End Cross-Section", "E CroSec", "Number of End Cross-Section", GH_ParamAccess.item);
evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Integer(), "Start Hinge", "S Hinge", "Number of Start Hinge", GH_ParamAccess.item);
evaluationUnit.Inputs[4].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Integer(), "End Hinge", "E Hinge", "Number of End Hinge", GH_ParamAccess.item);
evaluationUnit.Inputs[5].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Integer(), "Eccentricity", "Ecc", "Number of Eccentricity", GH_ParamAccess.item);
evaluationUnit.Inputs[6].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Integer(), "Division", "Div", "Number of Division", GH_ParamAccess.item);
evaluationUnit.RegisterInputParam(new Param_Integer(), "Division", "Div", "Number of Division", GH_ParamAccess.item);
evaluationUnit.Inputs[7].Parameter.Optional = true;
// evaluationUnit.RegisterInputParam(new Param_String(), "Taper Shape", "Taper", UtilLibrary.DescriptionRFTypes(typeof(TaperShapeType)), GH_ParamAccess.item);
evaluationUnit.Inputs[8].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Member", "Member", "Member object from the RFEM model to modify", GH_ParamAccess.item);
evaluationUnit.Inputs[9].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify node?", GH_ParamAccess.item);
evaluationUnit.Inputs[10].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete node?", GH_ParamAccess.item);
evaluationUnit.Inputs[11].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < 9; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
for (int i = 9; i < 9 + 3; i++)
{
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Get Data", "Get Data", "Gets Data from the RFEM Model.", Properties.Resources.icon_GetData);
mngr.RegisterUnit(evaluationUnit);
//evaluationUnit.RegisterInputParam(new Param_Boolean(), "Nodes in RFEM Model", "Nodes", "Nodes to get from the RFEM Model.", GH_ParamAccess.item, new GH_Boolean(false));
//evaluationUnit.RegisterInputParam(new Param_Boolean(), "Lines in RFEM Model", "Lines", "Lines to get from the RFEM Model.", GH_ParamAccess.item, new GH_Boolean(false));
//evaluationUnit.RegisterInputParam(new Param_Boolean(), "Members in RFEM Model", "Members", "Members to get from the RFEM Model.", GH_ParamAccess.item, new GH_Boolean(false));
//evaluationUnit.RegisterInputParam(new Param_Boolean(), "Surfaces in RFEM Model", "Surfaces", "Surfaces to get from the RFEM Model.", GH_ParamAccess.item, new GH_Boolean(false));
//evaluationUnit.RegisterInputParam(new Param_Boolean(), "Openings in RFEM Model", "Openings", "Openings to get from the RFEM Model.", GH_ParamAccess.item, new GH_Boolean(false));
//evaluationUnit.RegisterOutputParam(new Param_RFEM_GUI(), "Nodes", "Nodes", "Nodes from the RFEM Model.");
//modelDataCount1 = evaluationUnit.Inputs.Count;
//GH_ExtendableMenu gH_ExtendableMenu1 = new GH_ExtendableMenu(0, "model_data");
//gH_ExtendableMenu1.Name = "Model Data";
////gH_ExtendableMenu1.Collapse();
//evaluationUnit.AddMenu(gH_ExtendableMenu1);
//for (int i = 0; i < modelDataCount; i++)
//{
// gH_ExtendableMenu1.RegisterInputPlug(evaluationUnit.Inputs[i]);
//}
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Nodal Loads", "NLoads", "Nodal Loads from the RFEM Model.", GH_ParamAccess.item, new GH_Boolean(false));
evaluationUnit.Inputs[0].Parameter.Optional = true;
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "Nodal Loads", "NLoads", "Nodal Loads from the RFEM Model.");
modelDataCount2 = evaluationUnit.Inputs.Count;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "Load Data");
gH_ExtendableMenu.Name = "Load Data";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < modelDataCount2; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
gH_ExtendableMenu.RegisterOutputPlug(evaluationUnit.Outputs[i]);
}
evaluationUnit.RegisterInputParam(new Param_Filter(), "Filter", "Filter", "Filter RFEM Objects", GH_ParamAccess.list);
evaluationUnit.Inputs[modelDataCount2].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_String(), "Model Name", "Model Name", "Segment of the name of the RFEM Model to get information from", GH_ParamAccess.item);
evaluationUnit.Inputs[modelDataCount2 + 1].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "advanced");
gH_ExtendableMenu2.Name = "Advanced";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
for (int i = modelDataCount2; i < modelDataCount2 + 2; i++)
{
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Assemble Cross Section", "CroSec", "Creates a RFCroSec object to define new data or modify existing data " +
"in the RFEM model.");
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_Number(), "AxialArea [m²]", "A", "AxialArea [m²]", GH_ParamAccess.item);
evaluationUnit.Inputs[0].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "ShearAreaY [m²]", "Ay", "ShearAreaY [m²]", GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "ShearAreaZ [m²]", "Az", "ShearAreaZ [m²]", GH_ParamAccess.item);
evaluationUnit.Inputs[2].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "BendingMomentY [m⁴]", "Iy", "BendingMomentY [m⁴]", GH_ParamAccess.item);
evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "BendingMomentZ [m⁴]", "Iz", "BendingMomentZ [m⁴]", GH_ParamAccess.item);
evaluationUnit.Inputs[4].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "TorsionMoment [m⁴]", "Jt", "TorsionMoment [m⁴]", GH_ParamAccess.item);
evaluationUnit.Inputs[5].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "Rotation Angle [°]", "β", "Rotation Angle [°]", GH_ParamAccess.item);
evaluationUnit.Inputs[6].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "TemperatureLoadWidth [m]", "TempW", "TemperatureLoadWidth [m]", GH_ParamAccess.item);
evaluationUnit.Inputs[7].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "TemperatureLoadDepth [m]", "TempD", "TemperatureLoadDepth [m]", GH_ParamAccess.item);
evaluationUnit.Inputs[8].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Cross Section", "CroSec", "Cross Section object from the RFEM model to modify", GH_ParamAccess.item);
evaluationUnit.Inputs[9].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify node?", GH_ParamAccess.item);
evaluationUnit.Inputs[10].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete node?", GH_ParamAccess.item);
evaluationUnit.Inputs[11].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < 9; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
for (int i = 9; i < 9 + 3; i++)
{
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Input for LCA", "LCA", "Get Model masses groupes by material for Life Cycle Analysis", Properties.Resources.RFEM_LCA);
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_String(), "Model Name", "Model Name", "Segment of the name of the RFEM Model to get information from", GH_ParamAccess.item);
evaluationUnit.Inputs[0].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu0 = new GH_ExtendableMenu(0, "Advanced");
gH_ExtendableMenu0.Name = "Advanced";
gH_ExtendableMenu0.Expand();
gH_ExtendableMenu0.RegisterInputPlug(evaluationUnit.Inputs[0]);
evaluationUnit.AddMenu(gH_ExtendableMenu0);
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Assemble Material", "Mat", "Creates a RFMaterial object to define new data or modify existing data " +
"in the RFEM model.");
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_Number(), "Elasticity Modulus [N/m²]", "E", "Elasticity Modulus [N/m²]", GH_ParamAccess.item);
evaluationUnit.Inputs[0].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "Poisson Ratio", "Mu", "Poisson Ratio", GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "Shear Modulus [N/m²]", "G", "Shear Modulus [N/m²]", GH_ParamAccess.item);
evaluationUnit.Inputs[2].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "Specific Weight [N/m³]", "W", "Specific Weight [N/m³]", GH_ParamAccess.item);
evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "Thermal Expansion [1/°]", "Alpha", "Thermal Expansion [1/°]", GH_ParamAccess.item);
evaluationUnit.Inputs[4].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "Partial Safety Factor", "Gamma", "Partial Safety Factor", GH_ParamAccess.item);
evaluationUnit.Inputs[5].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Material", "Mat", "Material object from the RFEM model to modify", GH_ParamAccess.item);
evaluationUnit.Inputs[6].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify node?", GH_ParamAccess.item);
evaluationUnit.Inputs[7].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete node?", GH_ParamAccess.item);
evaluationUnit.Inputs[8].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < 6; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
for (int i = 6; i < 6 + 3; i++)
{
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Assemble Surface", "Srfc", "Creates a RFLine object to define new data or modify existing data " +
"in the RFEM model.");
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_String(), "Boundary Line List", "Bound", "Boundary Line List", GH_ParamAccess.item);
evaluationUnit.RegisterInputParam(new Param_String(), "Boundary Line List", "Bound", "Boundary Line List", GH_ParamAccess.item);
evaluationUnit.RegisterInputParam(new Param_String(), "Boundary Line List", "Bound", "Boundary Line List", GH_ParamAccess.item);
evaluationUnit.RegisterInputParam(new Param_String(), "Boundary Line List", "Bound", "Boundary Line List", GH_ParamAccess.item);
evaluationUnit.Inputs[0].Parameter.Optional = true;
//evaluationUnit.RegisterInputParam(new Param_String(), "Surface Type", "Type", UtilLibrary.DescriptionRFTypes(typeof(SurfaceGeometryType)), GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
//evaluationUnit.RegisterInputParam(new Param_Integer(), "Interpolated Points", "n", "Number of interpolated points for NURBS", GH_ParamAccess.item, new GH_Integer(4));
//evaluationUnit.Inputs[2].Parameter.Optional = true;
// evaluationUnit.RegisterInputParam(new Param_String(), "Thickness Type", "Th Type", UtilLibrary.DescriptionRFTypes(typeof(SurfaceThicknessType)), GH_ParamAccess.item);
evaluationUnit.Inputs[2].Parameter.Optional = true;
//evaluationUnit.RegisterInputParam(new Param_String(), "Stiffness Type", "St Type", UtilLibrary.DescriptionRFTypes(typeof(SurfaceStiffnessType)), GH_ParamAccess.item);
evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Surface", "Srfc", "Surface object from the RFEM model to modify", GH_ParamAccess.item);
evaluationUnit.Inputs[4].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify node?", GH_ParamAccess.item);
evaluationUnit.Inputs[5].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete node?", GH_ParamAccess.item);
evaluationUnit.Inputs[6].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < 4; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
for (int i = 4; i < 4 + 3; i++)
{
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Calculate", "Calculate", "Calculate RFEM Model.", Properties.Resources.Calculate);
mngr.RegisterUnit(evaluationUnit);
// Advanced
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Trigger", "Trigger", "Input to trigger the optimization", GH_ParamAccess.tree);
evaluationUnit.Inputs[0].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_String(), "Model Name", "Model Name", "Segment of the name of the RFEM Model to get information from", GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu4 = new GH_ExtendableMenu(0, "Advanced");
gH_ExtendableMenu4.Name = "Advanced";
gH_ExtendableMenu4.Expand();
evaluationUnit.AddMenu(gH_ExtendableMenu4);
gH_ExtendableMenu4.RegisterInputPlug(evaluationUnit.Inputs[0]);
gH_ExtendableMenu4.RegisterInputPlug(evaluationUnit.Inputs[1]);
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Assemble Nodal Support", "NodSup", "Creates a RFSupportP object to define new data or modify existing data " +
"in the RFEM model.");
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_String(), "Node List", "NodeList", "Node List", GH_ParamAccess.item);
evaluationUnit.RegisterInputParam(new Param_String(), "Node List", "NodeList", "Node List", GH_ParamAccess.item);
evaluationUnit.Inputs[0].Parameter.Optional = true;
//evaluationUnit.RegisterInputParam(new Param_String(), "Rotation Sequence", "Seq", UtilLibrary.DescriptionRFTypes(typeof(RotationSequence)), GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Point(), "Rotation Angles", "Rot", "Euler Angles [rad]", GH_ParamAccess.item);
evaluationUnit.Inputs[2].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Nodal Support", "NodSup", "Support object from the RFEM model to modify", GH_ParamAccess.item);
evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify node?", GH_ParamAccess.item);
evaluationUnit.Inputs[4].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete node?", GH_ParamAccess.item);
evaluationUnit.Inputs[5].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < 3; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
for (int i = 3; i < 3 + 3; i++)
{
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Assemble Line Hinge", "LineHinge", "Creates a RFLineHinge object to define new data or modify existing data " +
"in the RFEM model.");
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_Integer(), "LineNo", "LineNo", "Line Index related to the Line Hinge", GH_ParamAccess.item);
evaluationUnit.RegisterInputParam(new Param_Integer(), "LineNo", "LineNo", "Line Index related to the Line Hinge", GH_ParamAccess.item);
evaluationUnit.Inputs[0].Parameter.Optional = true;
//evaluationUnit.RegisterInputParam(new Param_String(), "Side", "Side", UtilLibrary.DescriptionRFTypes(typeof(HingeSideType)), GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Line Hinge", "LineHinge", "Line Hinge object from the RFEM model to modify", GH_ParamAccess.item);
evaluationUnit.Inputs[2].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify node?", GH_ParamAccess.item);
evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete node?", GH_ParamAccess.item);
evaluationUnit.Inputs[4].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < 2; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
for (int i = 2; i < 2 + 3; i++)
{
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Assemble Opening", "Opening", "Creates a RFOpening object to define new data or modify existing data " +
"in the RFEM model.");
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_String(), "Boundary Line List", "Bound", "Boundary Line List", GH_ParamAccess.item);
evaluationUnit.Inputs[0].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Integer(), "Interpolated Points", "n", "Number of interpolated points for NURBS", GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Opening", "Op", "Opening object from the RFEM model to modify", GH_ParamAccess.item);
evaluationUnit.Inputs[2].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify node?", GH_ParamAccess.item);
evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete node?", GH_ParamAccess.item);
evaluationUnit.Inputs[4].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < 2; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
for (int i = 2; i < 2 + 3; i++)
{
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Optimize Cross Sections", "Optimize CroSec", "Performs a Cross Section Optimization with the EC3 Module.", Properties.Resources.icon_OptimizeCS);
mngr.RegisterUnit(evaluationUnit);
// Advanced
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Trigger", "Trigger", "Input to trigger the optimization", GH_ParamAccess.tree);
evaluationUnit.Inputs[0].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_String(), "Model Name", "Model Name", "Segment of the name of the RFEM Model", GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "Advanced Items");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[0]);
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[1]);
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Assemble Node", "Node", "Creates a RFNode object to define new data or modify existing data " +
"in the RFEM model.");
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Node Coordinates [m]", "Node", "Node object from the RFEM model to modify", GH_ParamAccess.item);
evaluationUnit.Inputs[0].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify node?", GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete node?", GH_ParamAccess.item);
evaluationUnit.Inputs[2].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "modify");
gH_ExtendableMenu.Name = "Modify";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < 3; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Get Results", "Get Results", "Gets Results from the RFEM Model.", Properties.Resources.icon_GetResults);
mngr.RegisterUnit(evaluationUnit);
// Deformation
evaluationUnit.RegisterInputParam(new Param_Number(), "Scale Factor", "Scale Factor", "Scale Factor applied to the deformed shape.", GH_ParamAccess.item, new GH_Number(1));
evaluationUnit.Inputs[0].Parameter.Optional = true;
evaluationUnit.RegisterOutputParam(new Param_Curve(), "Crv", "Curves", "Deformed shape of the linear elemnents of the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_Mesh(), "Msh", "Meshes", "Deformed shape of the surface elemnents of the RFEM Model.");
//modelDataCount = evaluationUnit.Inputs.Count;
GH_ExtendableMenu gH_ExtendableMenu0 = new GH_ExtendableMenu(0, "Deformation");
gH_ExtendableMenu0.Name = "Deformation";
gH_ExtendableMenu0.Expand();
evaluationUnit.AddMenu(gH_ExtendableMenu0);
gH_ExtendableMenu0.RegisterInputPlug(evaluationUnit.Inputs[0]);
gH_ExtendableMenu0.RegisterOutputPlug(evaluationUnit.Outputs[0]);
gH_ExtendableMenu0.RegisterOutputPlug(evaluationUnit.Outputs[1]);
//for (int i = 0; i < modelDataCount; i++)
//{
// gH_ExtendableMenu0.RegisterInputPlug(evaluationUnit.Inputs[i]);
// gH_ExtendableMenu0.RegisterOutputPlug(evaluationUnit.Outputs[i]);
//}
// Load Cases and Combos
GH_ExtendableMenu gH_ExtendableMenu1 = new GH_ExtendableMenu(1, "Load Cases and Combos");
gH_ExtendableMenu1.Name = "Load Cases and Combos";
gH_ExtendableMenu1.Expand();
evaluationUnit.AddMenu(gH_ExtendableMenu1);
MenuPanel menuPanel = new MenuPanel(1, "panel_load");
menuPanel.Header = "Set here the load case for display.\n";
gH_ExtendableMenu1.AddControl(menuPanel);
_loadDrop = new MenuDropDown(1, "dropdown_loads_1", "loading type");
//_loadDrop.VisibleItemCount = 3;
_loadDrop.ValueChanged += _loadDrop__valueChanged;
_loadDrop.Header = "Set here the loading type for display.\n";
menuPanel.AddControl(_loadDrop);
// Advanced
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Trigger", "Trigger", "Input to trigger the optimization", GH_ParamAccess.tree);
evaluationUnit.Inputs[1].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_String(), "Model Name", "Model Name", "Segment of the name of the RFEM Model to get information from", GH_ParamAccess.item);
evaluationUnit.Inputs[2].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu3 = new GH_ExtendableMenu(3, "Advanced");
gH_ExtendableMenu3.Name = "Advanced";
gH_ExtendableMenu3.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu3);
for (int i = 1; i < 1 + 2; i++)
{
gH_ExtendableMenu3.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Set Data", "Set Data", "Sets Data from the RFEM Model.", Properties.Resources.icon_SetData);
mngr.RegisterUnit(evaluationUnit);
// Model Data
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Nodes", "RF Nodes", "Nodes to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[0].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Lines", "RF Lines", "Lines to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[1].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Members", "RF Members", "Members to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[2].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Surfaces", "RF Surfaces", "Surfaces to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Openings", "RF Openings", "Openings to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[4].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Nodal Supports", "RF NodSup", "Nodal Supports to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[5].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Line Supports", "RF LineSup", "Line Supports to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[6].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Surface Supports", "RF SfcSup", "Surface Supports to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[7].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Member Hinges", "RF MemberHinges", "Member Hinges from the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[8].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Line Hinges", "RF LineHinges", "Line Hinges from the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[9].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Cross Sections", "RF CroSecs", "Cross Sections from in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[10].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Materials", "RF Mat", "Materials to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[11].Parameter.Optional = true;
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Nodes", "RF Nodes", "Nodes from the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Lines", "RF Lines", "Lines from the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Members", "RF Members", "Members from the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Surfaces", "RF Surfaces", "Surfaces from the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Openings", "RF Openings", "Openings from the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Nodal Supports", "RF NodSup", "Nodal Supports from in the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Line Supports", "RF LineSup", "Line Supports from in the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Surface Supports", "RF SrfcSup", "Surface Supports from in the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Member Hinges", "RF MemberHinges", "Member Hinges from in the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Line Hinges", "RF LineHinges", "Line Hinges from in the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Cross Sections", "RF CroSecs", "Cross Sections from in the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Materials", "RF Mat", "Materials from the RFEM Model.");
modelDataCount = evaluationUnit.Inputs.Count;
GH_ExtendableMenu gH_ExtendableMenu0 = new GH_ExtendableMenu(0, "Model Data");
gH_ExtendableMenu0.Name = "Model Data";
gH_ExtendableMenu0.Expand();
evaluationUnit.AddMenu(gH_ExtendableMenu0);
for (int i = 0; i < modelDataCount; i++)
{
gH_ExtendableMenu0.RegisterInputPlug(evaluationUnit.Inputs[i]);
gH_ExtendableMenu0.RegisterOutputPlug(evaluationUnit.Outputs[i]);
}
// Load Data
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Nodal Loads", "RF NLoads", "Nodal Loads to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[modelDataCount + 0].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Line Loads", "RF LLoads", "Line Loads to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[modelDataCount + 1].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Member Loads", "RF MLoads", "Member Loads to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[modelDataCount + 2].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Surface Loads", "RF SLoads", "Surface Loads to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[modelDataCount + 3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Free Polygon Loads", "RF PolyLoads", "Free Polygon Loads to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[modelDataCount + 4].Parameter.Optional = true;
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Nodal Loads", "RF NLoads", "Nodal Loads from the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Line Loads", "RF LLoads", "Line Loads from the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Member Loads", "RF MLoads", "Member Loads from the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Surface Loads", "RF SLoads", "Surface Loads from the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Free Polygon Loads", "RF PolyLoads", "Free Polygon Loads to set in the RFEM Model.");
modelDataCount2 = evaluationUnit.Inputs.Count;
GH_ExtendableMenu gH_ExtendableMenu1 = new GH_ExtendableMenu(1, "Load Data");
gH_ExtendableMenu1.Name = "Load Data";
gH_ExtendableMenu1.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu1);
for (int i = modelDataCount; i < modelDataCount2; i++)
{
gH_ExtendableMenu1.RegisterInputPlug(evaluationUnit.Inputs[i]);
gH_ExtendableMenu1.RegisterOutputPlug(evaluationUnit.Outputs[i]);
}
// Load Cases and Combos
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Load Cases", "RF LCases", "Load Cases to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[modelDataCount2 + 0].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Load Combos", "RF LCombos", "Load Combinations to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[modelDataCount2 + 1].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "RF Result Combos", "RF RCombos", "Result Combinations to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[modelDataCount2 + 2].Parameter.Optional = true;
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Load Cases", "RF LCases", "Load Cases from the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Load Combos", "RF LCombos", "Load Combinations from the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "RF Result Combos", "RF RCombos", "Result Combinations from the RFEM Model.");
modelDataCount3 = evaluationUnit.Inputs.Count;
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(2, "Load Cases and Combos");
gH_ExtendableMenu2.Name = "Load Cases and Combos";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
for (int i = modelDataCount2; i < modelDataCount3; i++)
{
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[i]);
gH_ExtendableMenu2.RegisterOutputPlug(evaluationUnit.Outputs[i]);
}
// Advanced
evaluationUnit.RegisterInputParam(new Param_String(), "Model Name", "Model Name", "Segment of the name of the RFEM Model to set data in", GH_ParamAccess.item);
evaluationUnit.Inputs[modelDataCount3].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu3 = new GH_ExtendableMenu(3, "Advanced");
gH_ExtendableMenu3.Name = "Advanced";
gH_ExtendableMenu3.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu3);
gH_ExtendableMenu3.RegisterInputPlug(evaluationUnit.Inputs[modelDataCount3]);
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Get Results", "Get Results", "Gets Results from the RFEM Model.", Properties.Resources.icon_GetResults);
mngr.RegisterUnit(evaluationUnit);
// Deformation
evaluationUnit.RegisterInputParam(new Param_Number(), "Scale Factor", "Scale Factor", "Scale Factor applied to the deformed shape.", GH_ParamAccess.item, new GH_Number(1));
evaluationUnit.Inputs[0].Parameter.Optional = true;
evaluationUnit.RegisterOutputParam(new Param_Curve(), "Crv", "Curves", "Deformed shape of the linear elemnents of the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_Integer(), "Member No", "No", "Member Number related to deformed curve.");
evaluationUnit.RegisterOutputParam(new Param_Mesh(), "Msh", "Meshes", "Deformed shape of the surface elemnents of the RFEM Model.");
evaluationUnit.RegisterOutputParam(new Param_Integer(), "Surface No", "No", "Surface Number related to deformed mesh.");
GH_ExtendableMenu gH_ExtendableMenu0 = new GH_ExtendableMenu(0, "Deformation");
gH_ExtendableMenu0.Name = "Deformation";
gH_ExtendableMenu0.Expand();
evaluationUnit.AddMenu(gH_ExtendableMenu0);
gH_ExtendableMenu0.RegisterInputPlug(evaluationUnit.Inputs[0]);
for (int i = 0; i < 4; i++)
{
gH_ExtendableMenu0.RegisterOutputPlug(evaluationUnit.Outputs[i]);
}
// Load Cases and Combos
GH_ExtendableMenu gH_ExtendableMenu1 = new GH_ExtendableMenu(1, "Load Cases and Combos");
gH_ExtendableMenu1.Name = "Load Cases and Combos";
gH_ExtendableMenu1.Expand();
evaluationUnit.AddMenu(gH_ExtendableMenu1);
MenuPanel menuPanel = new MenuPanel(1, "panel_load");
menuPanel.Header = "Set here the load case for display.\n";
MenuStaticText menuStaticText0 = new MenuStaticText();
menuStaticText0.Text = "Select Load Case or Combo";
menuStaticText0.Header = "Load Case";
menuPanel.AddControl(menuStaticText0);
_loadDrop = new MenuDropDown(1, "dropdown_loads_1", "loading type");
_loadDrop.ValueChanged += _loadDrop__valueChanged;
_loadDrop.Header = "Set here the loading type for display.\n";
menuPanel.AddControl(_loadDrop);
MenuStaticText menuStaticText1 = new MenuStaticText();
menuStaticText1.Text = "Select Result Type";
menuStaticText1.Header = "Result Type";
menuPanel.AddControl(menuStaticText1);
_resulttypeDrop = new MenuDropDown(2, "dropdown_result_1", "result type");
_resulttypeDrop.ValueChanged += _loadDrop__valueChanged2;
_resulttypeDrop.Header = "Set here the loading type for display.\n";
menuPanel.AddControl(_resulttypeDrop);
gH_ExtendableMenu1.AddControl(menuPanel);
// Overwrite
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(2, "Overwrite");
gH_ExtendableMenu2.Name = "Overwrite";
evaluationUnit.RegisterInputParam(new Param_String(), "Overwrite Load Case or Combo", "Load Case", "Overwrite selected load case or combo from the dropdown menu.", GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[1]);
evaluationUnit.RegisterInputParam(new Param_Integer(), "Overwrite Result type", "Result Type", UtilLibrary.DescriptionRFTypes(typeof(ResultsValueType)), GH_ParamAccess.item);
evaluationUnit.Inputs[2].Parameter.Optional = true;
evaluationUnit.Inputs[2].EnumInput = UtilLibrary.ListRFTypes(typeof(ResultsValueType));
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[2]);
evaluationUnit.AddMenu(gH_ExtendableMenu2);
// Select results
GH_ExtendableMenu gH_ExtendableMenu3 = new GH_ExtendableMenu(3, "Select Results");
gH_ExtendableMenu3.Name = "Select Results";
gH_ExtendableMenu3.Expand();
evaluationUnit.AddMenu(gH_ExtendableMenu3);
MenuPanel menuPanel2 = new MenuPanel(2, "panel_results");
menuPanel2.Header = "Select output results.\n";
_tagGrp = new MenuRadioButtonGroup(0, "radiogrp_tags");
_tagGrp.Direction = MenuRadioButtonGroup.LayoutDirection.Vertical;
_tagGrp.ValueChanged += _tagGrp__valueChanged;
_tagGrp.MaxActive = 1;
_tagGrp.MinActive = 1;
buttonLocal = new MenuRadioButton(0, "radio_local", "Local", MenuRadioButton.Alignment.Horizontal)
{
Name = "Local",
Active = true
};
buttonGlobal = new MenuRadioButton(1, "radio_global", "Global", MenuRadioButton.Alignment.Horizontal)
{
Name = "Global",
Active = false
};
_tagGrp.AddButton(buttonLocal);
_tagGrp.AddButton(buttonGlobal);
menuPanel2.AddControl(_tagGrp);
_deformationsCheck = new MenuCheckBox(0, "deformations", "Deformation");
_deformationsCheck.ValueChanged += _deformationsCheck__valueChanged;
_deformationsCheck.Active = true;
_deformationsCheck.Header = "Display deformed shape.";
_memberForcesCheck = new MenuCheckBox(1, "check member forces", "Member Forces");
_memberForcesCheck.ValueChanged += _memberForcesCheck__valueChanged;
_memberForcesCheck.Active = true;
_memberForcesCheck.Header = "Add member forces to output results.";
_surfaceForcesCheck = new MenuCheckBox(2, "check surface forces", "Surface Forces");
_surfaceForcesCheck.ValueChanged += _surfaceForcesCheck__valueChanged;
_surfaceForcesCheck.Active = true;
_surfaceForcesCheck.Header = "Add surface forces to output results.";
_nodalReactionsCheck = new MenuCheckBox(3, "check nodal reactions", "Nodal Reactions");
_nodalReactionsCheck.ValueChanged += _nodalReactionsCheck__valueChanged;
_nodalReactionsCheck.Active = true;
_nodalReactionsCheck.Header = "Add nodal reactions to output results.";
_lineReactionsCheck = new MenuCheckBox(4, "check line reactions", "Line Reactions");
_lineReactionsCheck.ValueChanged += _lineReactionsCheck__valueChanged;
_lineReactionsCheck.Active = true;
_lineReactionsCheck.Header = "Add line reactions to output results.";
menuPanel2.AddControl(_deformationsCheck);
menuPanel2.AddControl(_memberForcesCheck);
menuPanel2.AddControl(_surfaceForcesCheck);
menuPanel2.AddControl(_nodalReactionsCheck);
menuPanel2.AddControl(_lineReactionsCheck);
gH_ExtendableMenu3.AddControl(menuPanel2);
// Advanced
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Trigger", "Trigger", "Input to trigger the optimization", GH_ParamAccess.tree);
evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_String(), "Model Name", "Model Name", "Segment of the name of the RFEM Model to get information from", GH_ParamAccess.item);
evaluationUnit.Inputs[4].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu4 = new GH_ExtendableMenu(4, "Advanced");
gH_ExtendableMenu4.Name = "Advanced";
gH_ExtendableMenu4.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu4);
for (int i = 3; i < 3 + 2; i++)
{
gH_ExtendableMenu4.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}