void cbxSolderEmulsion_SelectedIndexChanged(object sender, EventArgs e)
{
this.emulsionSolderMask = (EmulsionType)this.cbxSolderEmulsion.SelectedIndex;
if (this.solderMask)
{
this.chkInvert.Checked = !this.chkInvert.Checked;
}
}
public void SetShutterMode(EmulsionType emulsionType)
{
int cameraShutterSpeed = 0;
switch (emulsionType)
{
case EmulsionType.ThinType:
cameraShutterSpeed = 3;
break;
case EmulsionType.ThickType:
cameraShutterSpeed = 5;
break;
default:
// 該当なし
throw new Exception("Emulsion type value is not correct.");
}
VP910Define.SetShutterSpeed(deviceId, cameraShutterSpeed);
}
/// <summary>
/// 渡された値が適切かどうかを判定し，LEDの明るさをその値にします．
/// <para>成功した場合はTrueを返し，そうでない場合はFalseを返します．</para>
/// </summary>
/// <param name="lightStrength">明るさ</param>
/// <param name="parameterManager">ParameterManagerのインスタンス</param>
/// <exception cref="System.ArgumentException">要求された明るさが不正な場合</exception>
public void DAout(int lightStrength, ParameterManager parameterManager)
{
EmulsionType emulsionType = parameterManager.EmulsionType;
int t = 0;
if (!isLightStrengthCorrect(lightStrength))
{
// 光の強さが不適切な値の場合は例外を返す
throw new ArgumentException("Requested led light strength is not correct.");
}
// 光の強さ適切な場合
if (emulsionType == EmulsionType.ThinType)
{
t = 3;
}
else if (emulsionType == EmulsionType.ThickType)
{
t = parameterManager.LedParameter;
}
PulsePower(t, lightStrength);
lastLightVoltage = lightStrength;
}
public UserUI(string[] args)
{
InitializeComponent();
this.FormClosed += new FormClosedEventHandler(OnExit);
this.btnStart.Click += new EventHandler(btnStart_Click);
this.btnCancel.Click += new EventHandler(btnCancel_Click);
this.btnMotors.Click += new EventHandler(btnMotors_Click);
this.DragEnter += new DragEventHandler(UserUI_DragEnter);
this.DragDrop += new DragEventHandler(UserUI_DragDrop);
this.zFocus.Scroll += new EventHandler(zFocus_Scrolled);
this.zFocus.MouseDown += new MouseEventHandler(zFocus_MouseDown);
this.zFocus.MouseUp += new MouseEventHandler(zFocus_MouseUp);
this.zPower.Scroll += new EventHandler(zPower_Scrolled);
this.zPower.MouseDown += new MouseEventHandler(zPower_MouseDown);
this.zPower.MouseUp += new MouseEventHandler(zPower_MouseUp);
this.zOn.Click += new EventHandler(zOn_Click);
this.btnHome.Click += new EventHandler(btnHome_Click);
this.chkMirror.CheckedChanged += new EventHandler(chkMirror_CheckedChanged);
this.aboutMenuItem.Click += new EventHandler(aboutMenuItem_Click);
this.exitMenuItem.Click += new EventHandler(exitMenuItem_Click);
// default to KiCad v5 file name endings
this.fileEnding.topCopper = "F_Cu";
this.fileEnding.bottomCopper = "B_Cu";
this.fileEnding.topMask = "F_Mask";
this.fileEnding.bottomMask = "B_Mask";
int p = 0;
string ininame = "PCBLaser.config";
while (p < args.GetLength(0))
{
switch (args[p++])
{
case "-inifile":
ininame = GetArg(args, p++);
break;
}
}
try
{
XmlDocument config = new XmlDocument();
config.Load(Application.StartupPath + "\\" + ininame);
foreach (XmlNode N in config.SelectNodes("PCBConfig/*"))
{
switch (N.Name)
{
case "PortParams":
this.PortParams = N.InnerText;
break;
case "DefaultPower":
this.zPower.Value = int.Parse(N.InnerText);
break;
case "XOffset":
this.Xoffset = int.Parse(N.InnerText);
break;
case "YOffset":
this.Yoffset = int.Parse(N.InnerText);
break;
case "EtchMaskEmulsion":
this.emulsionEtchMask = this.parseEmulsionType(N.InnerText);
break;
case "SolderMaskEmulsion":
this.emulsionSolderMask = this.parseEmulsionType(N.InnerText);
break;
case "BacklashCompensation":
this.XBacklashComp = int.Parse(N.InnerText);
break;
}
}
foreach (XmlNode N in config.SelectNodes("PCBConfig/FileNameEnding/*"))
{
switch (N.Name)
{
case "TopCopper":
this.fileEnding.topCopper = N.InnerText;
break;
case "BottomCopper":
this.fileEnding.bottomCopper = N.InnerText;
break;
case "TopMask":
this.fileEnding.topMask = N.InnerText;
break;
case "BottomMask":
this.fileEnding.bottomMask = N.InnerText;
break;
}
}
}
catch
{
MessageBox.Show("Config file not found or invalid.", ininame);
System.Environment.Exit(1);
}
#if USEELTIMA
try
{
this.SerialPort = new SPortLib.SPortAx();
}
catch
{
MessageBox.Show("Failed to load serial port driver.", this.Text);
System.Environment.Exit(1);
}
this.SerialPort.InitString(PortParams.Substring(PortParams.IndexOf(":") + 1));
this.SerialPort.HandShake = 0x08;
this.SerialPort.FlowReplace = 0x80;
this.SerialPort.CharEvent = 10;
this.SerialPort.BlockMode = false;
this.SerialPort.OnRxFlag += new SPortLib._ISPortAxEvents_OnRxFlagEventHandler(this.SerialRead);
this.SerialPort.Open(PortParams.Substring(0, PortParams.IndexOf(":")));
#else
string[] parameter = PortParams.Substring(PortParams.IndexOf(":") + 1).Split(',');
if (parameter.Count() < 4)
{
this.disableUI();
MessageBox.Show("Unable to open printer: " + PortParams, this.Text);
System.Environment.Exit(2);
}
this.SerialPort = new SerialPort();
this.SerialPort.PortName = PortParams.Substring(0, PortParams.IndexOf(":"));
this.SerialPort.BaudRate = int.Parse(parameter[0]);
this.SerialPort.Parity = ParseParity(parameter[1]);
this.SerialPort.DataBits = int.Parse(parameter[2]);
this.SerialPort.StopBits = int.Parse(parameter[3]) == 1 ? StopBits.One : StopBits.Two;
if (parameter.Count() > 4)
{
this.SerialPort.Handshake = parameter[4] == "X" ? Handshake.XOnXOff : Handshake.RequestToSend;
}
this.SerialPort.ReceivedBytesThreshold = 1;
this.SerialPort.NewLine = "\r\n";
this.SerialPort.WriteBufferSize = TXBUFFERSIZE;
this.SerialPort.DataReceived += new SerialDataReceivedEventHandler(SerialPort_DataReceived);
try
{
this.SerialPort.Open();
}
catch
{
}
#endif
if (this.SerialOpen)
{
this.SerialOut("?");
this.pollTimer = new System.Timers.Timer();
this.pollTimer.Interval = this.PollInterval;
this.pollTimer.Elapsed += new System.Timers.ElapsedEventHandler(RenderRow);
this.pollTimer.SynchronizingObject = this;
this.motorTimer = new System.Timers.Timer();
this.motorTimer.Interval = 60 * 1000; // 1 minute
this.motorTimer.Elapsed += new System.Timers.ElapsedEventHandler(MotorOff);
this.motorTimer.SynchronizingObject = this;
this.SerialOut("XHome:" + this.Xoffset.ToString());
this.SerialOut("YHome:" + this.Yoffset.ToString());
this.setLaserPower(false);
}
else
{
this.disableUI();
MessageBox.Show("Unable to open printer: " + PortParams, this.Text);
System.Environment.Exit(2);
}
this.enableUI();
this.zFocus.Value = this.z;
this.cbxEtchEmulsion.SelectedIndex = (int)this.emulsionEtchMask;
this.cbxSolderEmulsion.SelectedIndex = (int)this.emulsionSolderMask;
this.chkInvert.Checked = solderMask ? this.emulsionSolderMask == EmulsionType.Negative : this.emulsionEtchMask == EmulsionType.Positive;
this.cbxEtchEmulsion.SelectedIndexChanged += new EventHandler(cbxEtchEmulsion_SelectedIndexChanged);
this.cbxSolderEmulsion.SelectedIndexChanged += new EventHandler(cbxSolderEmulsion_SelectedIndexChanged);
this.Visible = true;
}
public EmulsionEventArgs(EmulsionType emulsionType)
{
this.EmulsionType = emulsionType;
}
