/// <summary>
/// The EnvelopeByCenterline function.
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A EnvelopeByCenterlineOutputs instance containing computed results and the model with any new elements.</returns>
public static EnvelopeByCenterlineOutputs Execute(Dictionary <string, Model> inputModels, EnvelopeByCenterlineInputs input)
{
var Centerline = input.Centerline;
var perimeter = Centerline.Offset(input.BarWidth / 2, EndType.Butt).First();
// Create the foundation Envelope.
var extrude = new Elements.Geometry.Solids.Extrude(perimeter, input.FoundationDepth, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
var fndMatl = new Material("foundation", new Color(0.6, 0.60000002384185791, 0.6, 1), 0.0f, 0.0f);
var envMatl = new Material("envelope", new Color(0.3, 0.7, 0.7, 0.6), 0.0f, 0.0f);
var envelopes = new List <Envelope>()
{
new Envelope(perimeter, input.FoundationDepth * -1, input.FoundationDepth, Vector3.ZAxis,
0.0, new Transform(0.0, 0.0, input.FoundationDepth * -1), fndMatl, geomRep, false, Guid.NewGuid(), "")
};
// Create the Envelope at the location's zero plane.
var output = new EnvelopeByCenterlineOutputs(input.BuildingHeight, input.FoundationDepth);
extrude = new Elements.Geometry.Solids.Extrude(perimeter, input.BuildingHeight, Vector3.ZAxis, false);
geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
envelopes.Add(new Envelope(perimeter, 0.0, input.BuildingHeight, Vector3.ZAxis, 0.0,
new Transform(), envMatl, geomRep, false, Guid.NewGuid(), ""));
output.Model.AddElements(envelopes);
var sketch = new Sketch(input.Centerline, Guid.NewGuid(), "Centerline Sketch");
output.Model.AddElement(sketch);
return(output);
}
/// <summary>
///
/// </summary>
/// <param name="insertAt"></param>
/// <returns></returns>
private CompassBox MakeBaths(Vector3 moveTo)
{
var bathPerim = Polygon.Rectangle(bathLength, bathWidth);
var bathTopo = new CompassBox(bathPerim);
bathPerim = bathPerim.MoveFromTo(bathTopo.W, moveTo);
bathTopo = new CompassBox(bathPerim);
bathPerim = bathPerim.Rotate(Position, Rotation);
var bathLevels = Levels.Where(l => l.Elevation >= 0.0);
var bathMatl = new Material(new Color(0.0f, 0.6f, 1.0f, 0.8f), 0.0f, 0.0f, false, null, false, Guid.NewGuid(), "bath");
var i = 0;
foreach (var level in bathLevels.SkipLast(2))
{
var bathHeight = bathLevels.ElementAt(i + 1).Elevation - bathLevels.ElementAt(i).Elevation - 1.0;
var extrude = new Elements.Geometry.Solids.Extrude(bathPerim, bathHeight, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
Restrooms.Add(new Room(bathPerim, Vector3.ZAxis, "", "", "", "", 0.0, 0.0, Rotation, bathLevels.ElementAt(i).Elevation,
bathHeight, bathPerim.Area(), new Transform(0.0, 0.0, bathLevels.ElementAt(i).Elevation), bathMatl, geomRep, false, Guid.NewGuid(), "Restroom"));
i++;
}
return(bathTopo);
}
/// <summary>
///
/// </summary>
/// <param name="moveTo"></param>
/// <returns></returns>
private CompassBox MakeMech(Vector3 moveTo)
{
var mechPerim = Polygon.Rectangle(mechLength, mechWidth);
var mechTopo = new CompassBox(mechPerim);
mechPerim = mechPerim.MoveFromTo(mechTopo.W, moveTo);
mechTopo = new CompassBox(mechPerim);
mechPerim = mechPerim.Rotate(Position, Rotation);
var lastLevel = Levels.SkipLast(1).Last();
var mechHeight = lastLevel.Elevation - Levels.First().Elevation;
var extrude = new Elements.Geometry.Solids.Extrude(mechPerim, mechHeight, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
var mechMatl = new Material(new Color(0.2f, 0.2f, 0.2f, 0.8f), 0.0f, 0.0f, false, null, false, Guid.NewGuid(), "mech");
var ctr = mechPerim.Centroid();
Mechanicals.Add(new MechanicalCorridor(mechPerim, Vector3.ZAxis, Rotation,
new Vector3(ctr.X, ctr.Y, Levels.First().Elevation),
new Vector3(ctr.X, ctr.Y, Levels.First().Elevation + mechHeight),
mechHeight, mechPerim.Area() * mechHeight, "",
new Transform(0.0, 0.0, Levels.First().Elevation),
mechMatl, geomRep, false, Guid.NewGuid(), ""));
return(mechTopo);
}
/// <summary>
/// The CoreBySketch function.
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A CoreBySketchOutputs instance containing computed results and the model with any new elements.</returns>
public static CoreBySketchOutputs Execute(Dictionary <string, Model> inputModels, CoreBySketchInputs input)
{
{
//Extract the Levels from the model.
var levels = new List <Level>();
inputModels.TryGetValue("Levels", out var model);
if (model == null || model.AllElementsOfType <Level>().Count() == 0)
{
throw new ArgumentException("No Levels found.");
}
levels.AddRange(model.AllElementsOfType <Level>());
var top = levels.OrderByDescending(l => l.Elevation).First().Elevation + input.CoreHeightAboveRoof;
var elevation = levels.OrderBy(l => l.Elevation).First().Elevation;
var height = top - elevation;
// Create the Core extrusion.
var extrude = new Elements.Geometry.Solids.Extrude(input.Perimeter, height, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
var corMatl = new Material("core", new Color(1.0, 1.0, 1.0, 0.6), 0.0f, 0.0f);
var svcCore = new ServiceCore(input.Perimeter, Vector3.ZAxis, elevation, height, 0.0, new Transform(0.0, 0.0, elevation), corMatl, geomRep, false, Guid.NewGuid(), "serviceCore");
var output = new CoreBySketchOutputs(height);
output.Model.AddElement(svcCore);
return(output);
}
}
/// <summary>
/// The CoreByEnvelope function.
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A CoreByEnvelopeOutputs instance containing computed results and the model with any new elements.</returns>
public static CoreByEnvelopeOutputs Execute(Dictionary <string, Model> inputModels,
CoreByEnvelopeInputs inputs)
{
var envelopes = new List <Envelope>();
inputModels.TryGetValue("Envelope", out var model);
if (model == null || model.AllElementsOfType <Envelope>().Count() == 0)
{
throw new ArgumentException("No Envelope found.");
}
envelopes.AddRange(model.AllElementsOfType <Envelope>());
var coreDef = CoreMaker.MakeCore(inputs, envelopes);
var extrude = new Elements.Geometry.Solids.Extrude(coreDef.perimeter, coreDef.height, Vector3.ZAxis, false);
var corRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
var corMatl = new Material("serviceCore", Palette.White, 0.0f, 0.0f);
var output = new CoreByEnvelopeOutputs(coreDef.length, coreDef.width, coreDef.rotation);
//envelopes.ForEach(e => output.model.AddElement(e));
output.model.AddElement(new ServiceCore(coreDef.perimeter,
Vector3.ZAxis,
coreDef.elevation,
coreDef.height,
0.0,
new Transform(0.0, 0.0, coreDef.elevation),
corMatl,
corRep,
false,
Guid.NewGuid(),
"Service Core"));
return(output);
}
/// <summary>
/// Generate a volume of a given width
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A EnvolopeByPolylineOutputs instance containing computed results and the model with any new elements.</returns>
public static EnvolopeByPolylineOutputs Execute(Dictionary <string, Model> inputModels, EnvolopeByPolylineInputs input)
{
Polyline polyline = input.BuildingAxis;
if (polyline == null)
{
throw new ArgumentException("Please draw the axe of the building.");
}
Polygon perimeter = input.BuildingAxis.Offset(input.BuildingWidth / 2, EndType.Butt).First();
var envMatl = new Material("envelope", new Color(0.3, 0.7, 0.7, 0.6), 0.0f, 0.0f);
var envelopes = new List <Envelope>();
// Create the Envelope at the location's zero plane.
var output = new EnvolopeByPolylineOutputs(perimeter.ToPolyline().Length() * input.BuildingHeight, perimeter.Area());
var extrude = new Elements.Geometry.Solids.Extrude(perimeter, input.BuildingHeight, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
envelopes.Add(new Envelope(perimeter, 0.0, input.BuildingHeight, Vector3.ZAxis, 0.0,
new Transform(), envMatl, geomRep, false, Guid.NewGuid(), ""));
output.Model.AddElements(envelopes);
var sketch = new ModelCurve(polyline, name: "Centerline Sketch");
output.Model.AddElement(sketch);
return(output);
}
/// <summary>
/// Generates a building Envelope from a sketch of the footprint, a building height, and a setback configuration.
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A EnvelopeBySketchOutputs instance containing computed results and the model with any new elements.</returns>
public static EnvelopeBySketchOutputs Execute(Dictionary<string, Model> inputModels, EnvelopeBySketchInputs input)
{
Elements.Geometry.Solids.Extrude extrude;
Representation geomRep;
var envelopes = new List<Envelope>();
var envMatl = new Material("envelope", new Color(0.3, 0.7, 0.7, 0.6), 0.0f, 0.0f);
// Create the foundation Envelope.
if (input.FoundationDepth > 0)
{
extrude = new Elements.Geometry.Solids.Extrude(input.Perimeter, input.FoundationDepth, Vector3.ZAxis, false);
geomRep = new Representation(new List<Elements.Geometry.Solids.SolidOperation>() { extrude });
envelopes.Add(new Envelope(input.Perimeter, input.FoundationDepth * -1, input.FoundationDepth, Vector3.ZAxis,
0.0, new Transform(0.0, 0.0, input.FoundationDepth * -1), envMatl, geomRep, false, Guid.NewGuid(), ""));
}
// Create the Envelope at the location's zero plane.
var tiers = Math.Floor(input.BuildingHeight / input.SetbackInterval);
var tierHeight = tiers > 1 ? input.BuildingHeight / tiers : input.BuildingHeight;
var polygon = input.Perimeter;
if (polygon.IsClockWise())
{
polygon = polygon.Reversed();
}
extrude = new Elements.Geometry.Solids.Extrude(polygon, tierHeight, Vector3.ZAxis, false);
geomRep = new Representation(new List<Elements.Geometry.Solids.SolidOperation>() { extrude });
envelopes.Add(new Envelope(input.Perimeter, 0.0, tierHeight, Vector3.ZAxis, 0.0,
new Transform(), envMatl, geomRep, false, Guid.NewGuid(), ""));
// Create the remaining Envelope Elements.
var offsFactor = -1;
var elevFactor = 1;
for (int i = 0; i < tiers - 1; i++)
{
var tryPer = input.Perimeter.Offset(input.SetbackDepth * offsFactor);
tryPer = tryPer.OrderByDescending(p => p.Area()).ToArray();
if (tryPer.Count() == 0 || tryPer.First().Area() < input.MinimumTierArea)
{
break;
}
polygon = tryPer.First();
if (polygon.IsClockWise())
{
polygon = polygon.Reversed();
}
extrude = new Elements.Geometry.Solids.Extrude(polygon, tierHeight, Vector3.ZAxis, false);
geomRep = new Representation(new List<Elements.Geometry.Solids.SolidOperation>() { extrude });
envelopes.Add(new Envelope(tryPer.First(), tierHeight * elevFactor, tierHeight, Vector3.ZAxis, 0.0,
new Transform(0.0, 0.0, tierHeight * elevFactor), envMatl, geomRep, false, Guid.NewGuid(), ""));
offsFactor--;
elevFactor++;
}
var output = new EnvelopeBySketchOutputs(input.BuildingHeight, input.FoundationDepth);
envelopes = envelopes.OrderBy(e => e.Elevation).ToList();
foreach (var env in envelopes)
{
output.Model.AddElement(env);
}
return output;
}
/// <summary>
///
/// </summary>
/// <param name="stairs"></param>
/// <param name="liftSvc"></param>
private void MakeLifts(List <CompassBox> stairs, int liftSvc)
{
var liftMatl = new Material(new Color(1.0f, 0.9f, 0.4f, 0.8f), 0.0f, 0.0f, false, null, false, Guid.NewGuid(), "lift");
var liftPolys = new List <Polygon>()
{
Polygon.Rectangle(liftSize, liftSize)
};
for (var i = 0; i < (LiftQuantity * 0.5) - 1; i++)
{
var liftPerim = Polygon.Rectangle(liftSize, liftSize);
var liftTopo = new CompassBox(liftPerim);
var lastTopo = new CompassBox(liftPolys.Last());
liftPolys.Add(liftPerim.MoveFromTo(liftTopo.SW, lastTopo.SE));
}
var firstTopo = new CompassBox(liftPolys.First());
var stairTopo = stairs.First();
var makePolys = new List <Polygon>();
foreach (var polygon in liftPolys)
{
makePolys.Add(polygon.MoveFromTo(firstTopo.SW, stairTopo.SE).Rotate(Position, Rotation));
}
liftPolys.Clear();
liftPolys.Add(Polygon.Rectangle(liftSize, liftSize));
for (var i = 0; i < (LiftQuantity * 0.5) - 1; i++)
{
var liftPerim = Polygon.Rectangle(liftSize, liftSize);
var liftTopo = new CompassBox(liftPerim);
var lastTopo = new CompassBox(liftPolys.Last());
liftPolys.Add(liftPerim.MoveFromTo(liftTopo.SW, lastTopo.SE));
}
firstTopo = new CompassBox(liftPolys.First());
stairTopo = stairs.Last();
foreach (var polygon in liftPolys)
{
makePolys.Add(polygon.MoveFromTo(firstTopo.NW, stairTopo.NE).Rotate(Position, Rotation));
}
var liftSvcFactor = 0;
foreach (var polygon in makePolys)
{
var lastLevel = Levels.SkipLast((int)liftSvc * liftSvcFactor).Last();
var liftHeight = lastLevel.Elevation - Levels.First().Elevation;
if (liftHeight > 10.0)
{
var extrude = new Elements.Geometry.Solids.Extrude(polygon, liftHeight, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
Lifts.Add(new LiftShaft(polygon, Vector3.ZAxis, Rotation, Levels.First().Elevation,
liftHeight, polygon.Area() * liftHeight, "",
new Transform(0.0, 0.0, Levels.First().Elevation), liftMatl, geomRep,
false, Guid.NewGuid(), ""));
}
liftSvcFactor++;
}
}
public static rg.Brep ToRgBrep(this Elements.Geometry.Solids.Extrude extrude)
{
var profile = extrude.Profile.ToSurface();
var dir = extrude.Direction.ToRgVector();
dir.Unitize();
dir *= extrude.Height;
return(ExtrudeBrep(profile, dir));
}
private static Envelope CreateFoundation(Polygon perimeter, double depth)
{
var extrude = new Elements.Geometry.Solids.Extrude(perimeter, depth, Vector3.ZAxis, 0.0, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
var material = BuiltInMaterials.Concrete;
return(new Envelope(perimeter, depth * -1, depth, Vector3.ZAxis,
0.0, new Transform(0.0, 0.0, depth * -1), material, geomRep, Guid.NewGuid(), ""));
}
/// <summary>
///
/// </summary>
/// <param name="bathTopo"></param>
/// <returns></returns>
private List <CompassBox> MakeStairs(CompassBox bathTopo)
{
var stairTopos = new List <CompassBox>();
for (int i = 0; i < 2; i++)
{
Vector3 from;
Vector3 to;
var stairHeight = 0.0;
var lastLevel = Levels.Last();
var stairPerim = Polygon.Rectangle(stairLength, stairWidth);
var stairTopo = new CompassBox(stairPerim);
if (i == 0)
{
from = stairTopo.SW;
to = bathTopo.NW;
stairHeight = lastLevel.Elevation - Levels.First().Elevation + stairEntry;
}
else
{
from = stairTopo.NW;
to = bathTopo.SW;
stairHeight = lastLevel.Elevation - Levels.First().Elevation;
}
stairPerim = stairPerim.MoveFromTo(from, to);
stairTopo = new CompassBox(stairPerim);
stairTopos.Add(stairTopo);
stairPerim = stairPerim.Rotate(Position, Rotation);
var extrude = new Elements.Geometry.Solids.Extrude(stairPerim, stairHeight, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
var stairMatl = new Material(new Color(1.0f, 0.0f, 0.0f, 0.8f), 0.0f, 0.0f, false, null, false, Guid.NewGuid(), "stair");
Stairs.Add(new StairEnclosure(stairPerim, Vector3.ZAxis, Rotation, Levels.First().Elevation,
stairHeight, stairPerim.Area() * stairHeight, "",
new Transform(0.0, 0.0, Levels.First().Elevation),
stairMatl, geomRep, false, Guid.NewGuid(), ""));
}
return(stairTopos);
}
/// <summary>
/// Creates a Roof from a supplied Polygon sketch and a supplied elevation.
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A RoofBySketchOutputs instance containing computed results and the model with any new elements.</returns>
public static RoofBySketchOutputs Execute(Dictionary <string, Model> inputModels, RoofBySketchInputs input)
{
var extrude = new Elements.Geometry.Solids.Extrude(input.Perimeter, input.RoofThickness, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
var roofMatl = BuiltInMaterials.Concrete;
var output = new RoofBySketchOutputs(input.Perimeter.Area());
output.Model.AddElement(new Roof(input.Perimeter,
input.RoofElevation,
input.RoofThickness,
input.Perimeter.Area(),
new Transform(0.0, 0.0, input.RoofElevation - input.RoofThickness),
roofMatl,
geomRep,
false,
Guid.NewGuid(), ""));
return(output);
}
private void StairFlightMaker(Line flightLine, int threadNumber, double threadDepth, double actualRiserHeigh, double runWidth, double elevation, double structuralDepth)
{
List <Vector3> profileVertices = new List <Vector3>();
Vector3 riserVector = Vector3.ZAxis * actualRiserHeigh;
Vector3 threadVector = Vector3.XAxis * threadDepth;
// Add first point
profileVertices.Add(new Vector3());
for (int i = 0; i < threadNumber; i++)
{
profileVertices.Add(profileVertices[i * 2] + riserVector);
profileVertices.Add(profileVertices[i * 2] + riserVector + threadVector);
}
profileVertices.Add(CalculateEndStairUnderside(structuralDepth, riserVector, threadVector, profileVertices.Last()));
profileVertices.Add(CalculateStartStairUnderside(structuralDepth, riserVector, threadVector));
Polygon profile = new Polygon(profileVertices);
Vector3 flightStartingPoint = flightLine.Start + Vector3.ZAxis * elevation + Vector3.ZAxis.Cross(flightLine.Direction()).Negate() * runWidth / 2;
Transform transform = new Transform(flightStartingPoint, flightLine.Direction(), Vector3.ZAxis);
var extrude1 = new Elements.Geometry.Solids.Extrude(profile, runWidth, Vector3.YAxis, false);
// var extrude2 = new Elements.Geometry.Solids.Extrude(profile, runWidth / 2, Vector3.YAxis.Negate(), false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude1
});
var stairMaterial = new Material("Concrete", Colors.White, 0.5, 0.1, _texturePath);
Stairs.Add(new Stair(0, actualRiserHeigh, actualRiserHeigh, 0, profile,
transform, stairMaterial, geomRep, false, Guid.NewGuid(), ""));
}
private static Polygon AddRoomFromCell(Grid2d cell, string department, Material material, Model model, double circulationWidth, double height)
{
var polygons = cell.GetTrimmedCellGeometry();
if (polygons.Count() == 0)
{
return(null);
}
var polygon = (Polygon)polygons.First();
var newPoints = polygon.Vertices.ToList().ToArray().Shrink(circulationWidth);
var newPolygon = new Polygon(newPoints);
var solid = new Elements.Geometry.Solids.Extrude(newPolygon, height, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
solid
});
var room = new Room((Polygon)newPolygon, Vector3.ZAxis, "Section 1", "100", department, "100", newPolygon.Area(),
1.0, 0, 0, 10, newPolygon.Area(), new Transform(), material, geomRep, false, System.Guid.NewGuid(), "Section 1");
model.AddElement(room);
return(newPolygon);
}
public static List <Envelope> SliceAtHeight(Envelope envelope, double cutHeight, Boolean showDebugGeometry)
{
var debugMaterial = new Material("DebugSolid", new Color(1, 0, 0, 1));
var plane = new Plane(new Vector3(0, 0, cutHeight), Vector3.ZAxis);
var top = envelope.Elevation + envelope.Height;
var envelopesForBlockage = new List <Envelope>();
var newUpperSolids = new List <Elements.Geometry.Solids.SolidOperation>();
Polygon slice = null;
foreach (var solidOp in envelope.Representation.SolidOperations)
{
var intersections = new List <Vector3>();
var newUpperSolid = new Elements.Geometry.Solids.Solid();
foreach (var face in solidOp.Solid.Faces)
{
var polygon = face.Value.Outer.ToPolygon();
if (solidOp.LocalTransform != null)
{
polygon = (Polygon)polygon.Transformed(solidOp.LocalTransform);
}
if (envelope.Transform != null)
{
polygon = (Polygon)polygon.Transformed(envelope.Transform);
}
var faceIntersections = new List <Vector3>();
foreach (var segment in polygon.Segments())
{
if (segment.Intersects(plane, out var intersection))
{
intersections.Add(intersection);
faceIntersections.Add(intersection);
}
}
if (faceIntersections.Count == 0)
{
if (polygon.Centroid().Z > cutHeight)
{
newUpperSolid.AddFace(polygon);
}
}
else if (faceIntersections.Count > 1)
{
faceIntersections = faceIntersections.OrderBy(p => p.X).ThenBy(p => p.Y).ToList();
var splitLine = new Polyline(faceIntersections);
var splits = polygon.Split(splitLine);
foreach (var split in splits)
{
if (split.Centroid().Z > cutHeight)
{
newUpperSolid.AddFace(split);
}
}
}
}
if (intersections.Count >= 3)
{
slice = ConvexHull.FromPoints(intersections);
slice = slice.Project(new Plane(new Vector3(), Vector3.ZAxis));
}
else if (intersections.Count > 0)
{
Console.WriteLine($"Failed to intersect polygon for East Midtown: Found {intersections.Count} point");
}
newUpperSolids.Add(new Elements.Geometry.Solids.ConstructedSolid(newUpperSolid));
}
if (slice != null)
{
var extrude1 = new Elements.Geometry.Solids.Extrude(slice, cutHeight, Vector3.ZAxis, false);
var rep1 = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude1
});
var env1 = new Envelope(slice, 0, cutHeight, Vector3.ZAxis, 0, new Transform(), _debugMaterial, rep1, false, Guid.NewGuid(), "");
envelopesForBlockage.Add(env1);
var rep2 = new Representation(newUpperSolids);
var env2 = new Envelope(slice, 0, cutHeight, Vector3.ZAxis, 0, new Transform(), _debugMaterial, rep2, false, Guid.NewGuid(), "");
envelopesForBlockage.Add(env2);
if (showDebugGeometry)
{
Model.AddElement(env1);
Model.AddElement(env2);
}
}
return(envelopesForBlockage);
}
/// <summary>
/// Generates a building Envelope from a Site boundary.
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A EnvelopeBySiteOutputs instance containing computed results and the model with any new elements.</returns>
public static EnvelopeBySiteOutputs Execute(Dictionary <string, Model> inputModels, EnvelopeBySiteInputs input)
{
// Retrieve site information from incoming models.
var sites = new List <Site>();
inputModels.TryGetValue("Site", out var model);
if (model == null)
{
throw new ArgumentException("No Site found.");
}
sites.AddRange(model.AllElementsOfType <Site>());
sites = sites.OrderByDescending(e => e.Perimeter.Area()).ToList();
var output = new EnvelopeBySiteOutputs(input.BuildingHeight, input.FoundationDepth);
// Set input values based on whether we should consider setbacks
var siteSetback = input.SiteSetback;
var setbackInterval = input.UseSetbacks ? input.SetbackInterval : 0;
var setbackDepth = input.UseSetbacks ? input.SetbackDepth : 0;
var xy = new Plane((0, 0, 0), (0, 0, 1));
foreach (var site in sites)
{
var siteCentroid = site.Perimeter.Centroid();
var overridesForSite = input.Overrides?.EnvelopeFootprint?.Where(o => site.Perimeter.Contains(o.Identity.SiteCentroid)) ?? new List <EnvelopeFootprintOverride>();
var perims = site.Perimeter.Offset(siteSetback * -1);
if (perims.Count() == 0)
{
continue;
}
perims = perims.OrderByDescending(p => p.Area()).ToArray();
var perimeter = perims.First();
if (perimeter.Area() < input.MinimumTierArea)
{
continue;
}
var envelopes = new List <Envelope>();
// Create the foundation Envelope.
var fndElevation = input.FoundationDepth * -1;
var matchingFndOverride = overridesForSite.FirstOrDefault(o => o.Identity.Elevation.ApproximatelyEquals(fndElevation, 1));
var fndPerimeter = matchingFndOverride?.Value?.Perimeter?.Project(xy) ?? perimeter;
var extrude = new Elements.Geometry.Solids.Extrude(perimeter, input.FoundationDepth, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
var fndMatl = new Material("foundation", Palette.Gray, 0.0f, 0.0f);
var envMatl = new Material("envelope", Palette.Aqua, 0.0f, 0.0f);
var fndXform = new Transform(0.0, 0.0, input.FoundationDepth * -1);
var fndEnvelope = new Envelope(fndPerimeter, fndElevation, input.FoundationDepth, Vector3.ZAxis,
0.0, fndXform, fndMatl, geomRep, false, Guid.NewGuid(), "")
{
Perimeter = fndPerimeter.TransformedPolygon(fndXform),
SiteCentroid = siteCentroid
};
if (matchingFndOverride != null)
{
Identity.AddOverrideIdentity(fndEnvelope, matchingFndOverride);
}
envelopes.Add(fndEnvelope);
// Create the Envelope at the location's zero plane.
var matchingZeroOverride = overridesForSite.FirstOrDefault(o => o.Identity.Elevation.ApproximatelyEquals(0, 1));
var zeroPerimeter = matchingZeroOverride?.Value?.Perimeter?.Project(xy) ?? perimeter;
var tiers = setbackInterval == 0 ? 0 : Math.Floor(input.BuildingHeight / setbackInterval) - 1;
var tierHeight = tiers > 0 ? input.BuildingHeight / (tiers + 1) : input.BuildingHeight;
extrude = new Elements.Geometry.Solids.Extrude(zeroPerimeter, tierHeight, Vector3.ZAxis, false);
geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
var zeroEnvelope = new Envelope(zeroPerimeter, 0.0, tierHeight, Vector3.ZAxis, 0.0,
new Transform(), envMatl, geomRep, false, Guid.NewGuid(), "")
{
Perimeter = zeroPerimeter,
SiteCentroid = siteCentroid
};
if (matchingZeroOverride != null)
{
Identity.AddOverrideIdentity(zeroEnvelope, matchingZeroOverride);
perimeter = zeroPerimeter; // this way tiers above, if not overridden, respect the ground floor boundary.
}
envelopes.Add(zeroEnvelope);
// Create the remaining Envelope Elements.
var offsFactor = -1;
var elevFactor = 1;
var totalHeight = 0.0;
for (int i = 0; i < tiers; i++)
{
if (totalHeight + tierHeight > input.BuildingHeight)
{
break;
}
var tierElev = tierHeight * elevFactor;
var tryPer = perimeter.Offset(setbackDepth * offsFactor);
if (tryPer.Count() == 0 || tryPer.First().Area() < input.MinimumTierArea)
{
break;
}
tryPer = tryPer.OrderByDescending(p => p.Area()).ToArray();
var matchingTierOverride = overridesForSite.FirstOrDefault(o => o.Identity.Elevation.ApproximatelyEquals(tierElev, 1));
var tierPerimeter = matchingTierOverride?.Value?.Perimeter?.Project(xy) ?? tryPer.First();
extrude = new Elements.Geometry.Solids.Extrude(tierPerimeter, tierHeight, Vector3.ZAxis, false);
geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
var elevationXform = new Transform(0.0, 0.0, tierElev);
var tierEnvelope = new Envelope(tierPerimeter, tierElev, tierHeight, Vector3.ZAxis, 0.0,
elevationXform, envMatl, geomRep, false, Guid.NewGuid(), "")
{
Perimeter = tierPerimeter.TransformedPolygon(elevationXform),
SiteCentroid = siteCentroid
};
if (matchingTierOverride != null)
{
Identity.AddOverrideIdentity(tierEnvelope, matchingTierOverride);
}
envelopes.Add(tierEnvelope);
offsFactor--;
elevFactor++;
totalHeight = totalHeight + tierHeight;
}
envelopes.OrderBy(e => e.Elevation).ToList().ForEach(e => output.Model.AddElement(e));
}
return(output);
}
/// <summary>
/// The PreparedFoodLayout function.
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A PreparedFoodLayoutOutputs instance containing computed results and the model with any new elements.</returns>
public static PreparedFoodLayoutOutputs Execute(Dictionary <string, Model> inputModels, PreparedFoodLayoutInputs input)
{
var counterDepth = input.CounterDepth / 39.37; if (counterDepth == 0)
{
counterDepth = 1;
}
var counterHeight = input.CounterHeight / 39.37; if (counterHeight == 0)
{
counterHeight = 1;
}
var aisle = input.AisleFrontage / 39.37; if (aisle <= 0)
{
aisle = 1.0;
}
PreparedFoodLayoutOutputs output = new PreparedFoodLayoutOutputs();
Model model = null;
IList <Room> rooms = null;
//test inputModels.Clear();
// we want Departments as inputs!
if (inputModels.TryGetValue("Departments", out model))
{
rooms = model.AllElementsOfType <Room>().ToList();
}
else
{
//throw new ApplicationException("Need Departments as input!");
// default:
double inputLength = 55;
double inputWidth = 25;
double inputHeight = 5;
var rectangle = Polygon.Rectangle(inputLength, inputWidth);
var mass = new Mass(rectangle, inputHeight);
output.model.AddElement(mass);
var material = new Material("office", new Color(0, 0, 1, 0.5));
var solid = new Elements.Geometry.Solids.Extrude(rectangle, inputHeight, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
solid
});
Room r = new Room(rectangle, Vector3.ZAxis, "Section 1", "100", "prepared", "100", rectangle.Area(),
1.0, 0, 0, inputHeight, rectangle.Area(), new Transform(), material, geomRep, false, System.Guid.NewGuid(), "Section 1");
output.model.AddElement(r);
rooms = new List <Room>();
rooms.Add(r);
}
// ok, now the real work begins... from the room
// this function only deals with certain departments.
var appropriateRooms =
rooms.Where(r => r.Department == "prepared");
if (appropriateRooms.Count() == 0)
{
throw new ApplicationException("This function works only on rooms with 'prepared' department");
}
foreach (var r in appropriateRooms)
{
var side1 = r.Perimeter.Segments()[0];
var side2 = r.Perimeter.Segments()[1];
Console.WriteLine("side1: " + side1.Direction());
Console.WriteLine("side2: " + side2.Direction());
var line1 = side1.DivideByLength(aisle).First();
var line2 = side2.Reversed().DivideByLength(aisle).First();
var roomCenter = r.Perimeter.GetCenter();
//roomCenter.HighlightPoint(2, output.model);
// var lineX = new Line( roomCenter, roomCenter + new Vector3(10,0,0));
//var lineY = new Line( roomCenter, roomCenter + new Vector3(0,5,0));
//lineX.HighlightThis(output.model);
//lineY.HighlightThis(output.model);
// ok - sweep is not working so we're going to have to build out the plan view and extrude up.
// the "B" will be the inside curve.
//line1.HighlightThis(output.model);
//line2.HighlightThis(output.model);
var smallerSide = (Math.Min(side1.Length(), side2.Length()));
var radius = (input.CounterRadiusRatio / 100.0) * smallerSide;
//var radius = (side1.Length() - line1.Length()) * 0.3;
var p1 = line1.PointAt(1.0);
var p2 = line2.PointAt(1.0);
// p1.HighlightPoint(1,output.model);
//p2.HighlightPoint(1,output.model);
// p1b.HighlightPoint(0.5, output.model);
//p2b.HighlightPoint(0.5, output.model);
var dir1 = side2.Direction().WhichPointsTo(p1, roomCenter);
var dir2 = side1.Direction().WhichPointsTo(p2, roomCenter);
var line1Offset = new Line(p1, p1 + dir1 * 10);
var line2Offset = new Line(p2, p2 + dir2 * 10);
var line1bOffset = line1Offset.OffsetTowards(roomCenter, counterDepth);
var line2bOffset = line2Offset.OffsetTowards(roomCenter, counterDepth);
var p1b = line1bOffset.Start;
var p2b = line2bOffset.Start;
Console.WriteLine("L1Offset: " + line1Offset.Direction());
Console.WriteLine("L2Offset: " + line2Offset.Direction());
Console.WriteLine("L1bOffset: " + line1bOffset.Direction());
Console.WriteLine("L2bOffset: " + line2bOffset.Direction());
var arc = line1Offset.Fillet(line2Offset, radius);
var arcB = line1bOffset.Fillet(line2bOffset, radius - counterDepth);
// which end will be nearest?
var closest1 = (p1.DistanceTo(arc.Start) < p1.DistanceTo(arc.End))? arc.Start : arc.End;
var closest2 = (p2.DistanceTo(arc.Start) < p2.DistanceTo(arc.End))? arc.Start : arc.End;
var closest1b = (p1b.DistanceTo(arcB.Start) < p1b.DistanceTo(arcB.End))? arcB.Start : arcB.End;
var closest2b = (p2b.DistanceTo(arcB.Start) < p2b.DistanceTo(arcB.End))? arcB.Start : arcB.End;
//line1Offset.HighlightThis(output.model);
// line2Offset.HighlightThis(output.model);
// redefine to the arc points
line1Offset = new Line(p1, closest1);
line2Offset = new Line(p2, closest2);
//line1Offset.HighlightThis(output.model);
//line2Offset.HighlightThis(output.model);
//line1bOffset.HighlightThis(output.model);
//line2bOffset.HighlightThis(output.model);
// arc.HighlightThis(output.model);
// arcB.HighlightThis(output.model);
// ok - we want to draw the lines now
// ordered list of vectors
int numSegments = 10;
var list = new List <Vector3>();
list.Add(p1);
if (arc.Start.DistanceTo(closest1) < arc.Start.DistanceTo(closest2))
{
list.AddRange(arc.Divide(numSegments));
}
else
{
list.AddRange(arc.Reversed().Divide(numSegments));
}
list.Add(p2);
list.Add(p2b);
if (arcB.Start.DistanceTo(closest2b) < arcB.Start.DistanceTo(closest1b))
{
list.AddRange(arcB.Divide(numSegments));
}
else
{
list.AddRange(arcB.Divide(numSegments));
}
list.Add(p1b);
Polygon newP = new Polygon(list);
newP = newP.Reversed(); // it was the wrong way.
//line1.ThickenThis(model);
var counter = new Material("Countertop", Colors.Granite);
var prepFoodCounter = new Elements.Geometry.Solids.Extrude(new Profile(newP), counterHeight, Vector3.ZAxis, false);
Representation geomRep = null; // new Representation(new Elements.Geometry.Solids.SolidOperation[] { prepFoodCounter});
var mass = new Mass(new Profile(newP), counterHeight, counter, null, geomRep);
output.model.AddElement(mass);
// Console.WriteLine(output.model.ToJson(true));
//System.IO.File.WriteAllText(@"C:\temp\model.json", output.model.ToJson(true));
}
return(output);
}
/// <summary>
/// The RoomsByFloorsTest function.
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A RoomsByFloorsTestOutputs instance containing computed results and the model with any new elements.</returns>
public static RoomsByFloorsTestOutputs Execute(Dictionary <string, Model> inputModels, RoomsByFloorsTestInputs input)
{
var floors = new List <Floor>();
inputModels.TryGetValue("Floors", out var model);
if (model == null)
{
throw new ArgumentException("No Floors found.");
}
floors.AddRange(model.AllElementsOfType <Floor>());
floors = floors.OrderBy(f => f.Elevation).Where(f => f.Elevation >= 0.0).ToList();
var upperFloorArea = 0.0;
foreach (var floor in floors.Skip(1).SkipLast(2))
{
upperFloorArea += floor.Profile.Perimeter.Area();
}
var retlColor = Palette.Emerald;
var offcColor = Palette.Cobalt;
var retlMatl = new Material("retail", retlColor, 0.0f, 0.0f);
var offcMatl = new Material("office", offcColor, 0.0f, 0.0f);
var rooms = new List <Room>();
var grdRooms = 0;
var grdArea = 0.0;
var upArea = 0.0;
var typRooms = 0;
var typRoomCount = 0;
for (var i = 0; i < floors.Count() - 2; i++)
{
var floor = floors.ElementAt(i);
var ceiling = floors.ElementAt(i + 1);
var height = ceiling.ProfileTransformed().Perimeter.Vertices.First().Z
- floor.ProfileTransformed().Perimeter.Vertices.First().Z
- floor.Thickness - 0.7;
var offPerims = ceiling.Profile.Perimeter.Offset(input.PlanSetback * -1);
if (offPerims.Count() == 0)
{
throw new InvalidOperationException("Plan Setback too deep. No valid room boundaries could be created.");
}
var perimeter = offPerims.First();
var perimBox = new CompassBox(perimeter);
var xDiv = 1.0;
var yDiv = 1.0;
var xRoomSize = 1.0;
var yRoomSize = 1.0;
var roomColor = offcColor;
if (i == 0)
{
xDiv = input.GroundFloorRoomLengthDivisions;
yDiv = input.GroundFloorRoomWidthDivisions;
xRoomSize = (int)Math.Ceiling(perimBox.SizeX / xDiv);
yRoomSize = (int)Math.Ceiling(perimBox.SizeY / yDiv);
grdRooms = (int)Math.Floor(xDiv * yDiv);
grdArea = perimeter.Area();
roomColor = retlColor;
}
else
{
xDiv = input.TypicalFloorRoomsLengthDivisions;
yDiv = input.TypicalFloorRoomsWidthDivisions;
xRoomSize = (int)Math.Ceiling(perimBox.SizeX / xDiv);
yRoomSize = (int)Math.Ceiling(perimBox.SizeY / yDiv);
typRooms = (int)Math.Floor(xDiv * yDiv);
typRoomCount += typRooms;
upArea += perimeter.Area();
}
var perimeters = new List <Polygon>();
var loc = perimBox.SW;
for (var x = 0; x < xDiv; x++)
{
for (var y = 0; y < yDiv; y++)
{
var perim = Polygon.Rectangle(xRoomSize, yRoomSize);
var pTopo = new CompassBox(perim);
perimeters.Add(perim.MoveFromTo(pTopo.SW, loc));
loc = new Vector3(loc.X, loc.Y + yRoomSize, 0.0);
}
loc = new Vector3(loc.X + xRoomSize, perimBox.SW.Y, 0.0);
}
foreach (var perim in perimeters)
{
var name = "Office";
var matl = offcMatl;
if (i == 0)
{
name = "Retail";
matl = retlMatl;
}
var rPerim = perim.Rotate(floor.Profile.Perimeter.Centroid(), input.PlanRotation);
if (!rPerim.Intersects(perimeter))
{
continue;
}
var rmPerims = perimeter.Intersection(rPerim);
foreach (var rmPerim in rmPerims)
{
var roomPerims = rmPerim.Offset(-0.2);
if (roomPerims.Count() == 0)
{
continue;
}
foreach (var room in roomPerims)
{
Representation geomRep = null;
if (input.RoomsIn3D)
{
var solid = new Elements.Geometry.Solids.Extrude(room, height, Vector3.ZAxis, false);
geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
solid
});
}
else
{
var solid = new Elements.Geometry.Solids.Lamina(room, false);
geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
solid
});
}
var rm = new Room(room, Vector3.ZAxis, "", "", "", "", 0.0, 0.0, 0.0, floor.Elevation, height, room.Area(), new Transform(floor.Transform), matl, geomRep, false, Guid.NewGuid(), name);
rm.Transform.Move(new Vector3(0.0, 0.0, 0.7));
rooms.Add(rm);
}
}
}
}
var output = new RoomsByFloorsTestOutputs(grdRooms, grdArea, typRooms, typRoomCount, upArea);
foreach (var room in rooms)
{
output.Model.AddElement(room);
}
return(output);
}
/// <summary>
/// Generates a building Envelope from a Site boundary.
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A EnvelopeBySiteOutputs instance containing computed results and the model with any new elements.</returns>
public static EnvelopeBySiteOutputs Execute(Dictionary <string, Model> inputModels, EnvelopeBySiteInputs input)
{
// Retrieve site information from incoming models.
var sites = new List <Site>();
inputModels.TryGetValue("Site", out var model);
if (model == null)
{
throw new ArgumentException("No Site found.");
}
sites.AddRange(model.AllElementsOfType <Site>());
sites = sites.OrderByDescending(e => e.Perimeter.Area()).ToList();
var output = new EnvelopeBySiteOutputs(input.BuildingHeight, input.FoundationDepth);
foreach (var site in sites)
{
var perims = site.Perimeter.Offset(input.SiteSetback * -1);
if (perims.Count() == 0)
{
continue;
}
perims = perims.OrderByDescending(p => p.Area()).ToArray();
var perimeter = perims.First();
if (perimeter.Area() < input.MinimumTierArea)
{
continue;
}
// Create the foundation Envelope.
var extrude = new Elements.Geometry.Solids.Extrude(perimeter, input.FoundationDepth, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
var fndMatl = new Material("foundation", Palette.Gray, 0.0f, 0.0f);
var envMatl = new Material("envelope", Palette.Aqua, 0.0f, 0.0f);
var envelopes = new List <Envelope>()
{
new Envelope(perimeter, input.FoundationDepth * -1, input.FoundationDepth, Vector3.ZAxis,
0.0, new Transform(0.0, 0.0, input.FoundationDepth * -1), fndMatl, geomRep, false, Guid.NewGuid(), "")
};
// Create the Envelope at the location's zero plane.
var tiers = Math.Floor(input.BuildingHeight / input.SetbackInterval);
var tierHeight = tiers > 0 ? input.BuildingHeight / tiers : input.BuildingHeight;
extrude = new Elements.Geometry.Solids.Extrude(perimeter, tierHeight, Vector3.ZAxis, false);
geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
envelopes.Add(new Envelope(perimeter, 0.0, tierHeight, Vector3.ZAxis, 0.0,
new Transform(), envMatl, geomRep, false, Guid.NewGuid(), ""));
// Create the remaining Envelope Elements.
var offsFactor = -1;
var elevFactor = 1;
for (int i = 0; i < tiers; i++)
{
var tryPer = perimeter.Offset(input.SetbackDepth * offsFactor);
if (tryPer.Count() == 0 || tryPer.First().Area() < input.MinimumTierArea)
{
break;
}
tryPer = tryPer.OrderByDescending(p => p.Area()).ToArray();
extrude = new Elements.Geometry.Solids.Extrude(tryPer.First(), tierHeight, Vector3.ZAxis, false);
geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
envelopes.Add(new Envelope(tryPer.First(), tierHeight * elevFactor, tierHeight, Vector3.ZAxis, 0.0,
new Transform(0.0, 0.0, tierHeight * elevFactor), envMatl, geomRep, false, Guid.NewGuid(), ""));
offsFactor--;
elevFactor++;
}
envelopes.OrderBy(e => e.Elevation).ToList().ForEach(e => output.Model.AddElement(e));
}
return(output);
}
/// <summary>
/// The PlanByProgram function.
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A PlanByProgramOutputs instance containing computed results and the model with any new elements.</returns>
public static PlanByProgramOutputs Execute(Dictionary <string, Model> inputModels, PlanByProgramInputs input)
{
var rmDefModel = inputModels["Program"];
var rmDefs = new List <RoomDefinition>(rmDefModel.AllElementsOfType <RoomDefinition>().ToList());
if (rmDefs.Count == 0)
{
throw new ArgumentException("No Program found.");
}
var suites = Placer.PlaceSuites(input, rmDefs);
var tmpput = new PlanByProgramOutputs();
var roomCount = 0;
var roomArea = 0.0;
foreach (var suite in suites)
{
roomCount += suite.Rooms.Count;
foreach (var room in suite.Rooms)
{
var extrude = new Elements.Geometry.Solids.Extrude(new Profile(room.Perimeter),
room.Height,
Vector3.ZAxis,
false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
tmpput.Model.AddElement(new Elements.Room(room.Perimeter,
Vector3.ZAxis,
room.Suite,
room.SuiteID,
room.Department,
room.Number,
room.DesignArea,
room.DesignRatio,
0.0,
room.Elevation,
room.Height,
room.Area,
new Transform(),
room.ColorAsMaterial,
geomRep,
false,
Guid.NewGuid(),
room.Name));
roomArea += room.Area;
}
}
var suitesByElevation = suites.GroupBy(s => s.Elevation);
var totalArea = 0.0;
foreach (var group in suitesByElevation)
{
var elevation = group.First().Elevation;
var suiteprints = new List <Polygon>();
foreach (var suite in group)
{
if (input.ConformFloorsToRooms)
{
var roomPrints = Shaper.Merge(suite.RoomsAsPolygons);
if (roomPrints.Count == 0)
{
suiteprints.Add(suite.CompassCorridor.Box.Offset(input.CorridorWidth).First());
}
foreach (var roomPrint in roomPrints)
{
suiteprints.Add(roomPrint.Offset(input.CorridorWidth).First());
}
}
else
{
suiteprints.Add(suite.CompassCorridor.Box.Offset(input.CorridorWidth).First());
}
}
suiteprints = Shaper.Merge(suiteprints);
foreach (var footprint in suiteprints)
{
tmpput.Model.AddElement(new Floor(footprint, 0.1, new Transform(0.0, 0.0, elevation - 0.1),
BuiltInMaterials.Concrete, null, false, Guid.NewGuid(), ""));
tmpput.Model.AddElement(new Level(elevation, Guid.NewGuid(), elevation.ToString()));
totalArea += footprint.Area();
}
}
var output = new PlanByProgramOutputs(roomCount, roomArea, totalArea - roomArea, totalArea)
{
Model = tmpput.Model
};
return(output);
}
/// <summary>
/// Generates Rooms of a supplied area on each incoming Level deployed along the Level's straight skeleton spine which is used as a central corridor path.
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A RoomsByLevelsOutputs instance containing computed results and the model with any new elements.</returns>
public static RoomsByLevelsOutputs Execute(Dictionary <string, Model> inputModels, RoomsByLevelsInputs input)
{
var levels = new List <LevelPerimeter>();
inputModels.TryGetValue("Levels", out var lvlModel);
if (lvlModel != null)
{
levels.AddRange(lvlModel.AllElementsOfType <LevelPerimeter>());
}
if (levels.Count == 0)
{
throw new ArgumentException("No LevelPerimeters found.");
}
levels = levels.OrderBy(l => l.Elevation).ToList();
var stories = new List <Story>();
for (var i = 0; i < levels.Count - 1; i++)
{
var perimeter = levels[i].Perimeter;
var elevation = levels[i].Elevation;
var height = (levels[i + 1].Elevation - levels[i].Elevation) - 0.5; // replace this number with a plenum height
var spine = levels[i].Perimeter.Spine();
var sections = levels[i].Perimeter.Jigsaw();
var endSects = new List <Polygon>();
var midSects = new List <Polygon>();
var corridors = new List <Polygon>();
var story =
new Story(perimeter)
{
Elevation = elevation
};
foreach (var line in spine)
{
corridors.Add(line.ToPolyline().Offset(input.CorridorWidth * 0.5, EndType.Square).First());
}
corridors = Shaper.Merge(corridors);
foreach (var corridor in corridors)
{
story.AddCorridor(new RoomKit.Room(corridor.Straighten(input.CorridorWidth * 0.1).Simplify(input.CorridorWidth * 0.9), height), false);
}
foreach (var polygon in sections)
{
if (polygon.Vertices.Count == 3)
{
endSects.Add(polygon.AlignedBox());
continue;
}
midSects.Add(polygon);
}
var scaffolds = new List <Polygon>(endSects);
foreach (var midSect in midSects)
{
scaffolds.AddRange(Shaper.Differences(midSect.ToList(), endSects));
}
var roomRows = new List <RoomRow>();
foreach (var polygon in scaffolds)
{
roomRows.Add(new RoomRow(polygon));
}
foreach (var row in roomRows)
{
var result = row.AddRoomByArea(row.Area * 0.5, height, elevation);
result = row.AddRoomByArea(row.Area * 0.5, height, elevation);
row.Infill(height, true);
}
var rowRooms = new List <RoomKit.Room>();
foreach (var row in roomRows)
{
rowRooms.AddRange(row.Rooms);
}
foreach (var room in rowRooms)
{
story.AddRoom(room);
}
stories.Add(story);
}
var rooms = new List <Elements.Room>();
foreach (var story in stories)
{
foreach (var room in story.Rooms)
{
room.Color = Palette.Aqua;
var solid = new Elements.Geometry.Solids.Extrude(room.Perimeter, room.Height, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
solid
});
rooms.Add(new Elements.Room(room.Perimeter,
Vector3.ZAxis,
"", "", "", "",
input.RoomArea,
room.Ratio,
0.0,
room.Elevation,
room.Height,
room.Area,
null,
room.ColorAsMaterial,
geomRep,
false,
Guid.NewGuid(),
room.Name));
}
foreach (var room in story.Corridors)
{
room.Color = Palette.White;
var solid = new Elements.Geometry.Solids.Extrude(room.Perimeter, room.Height, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
solid
});
rooms.Add(new Elements.Room(room.Perimeter,
Vector3.ZAxis,
"", "", "", "",
input.RoomArea,
room.Ratio,
0.0,
room.Elevation,
room.Height,
room.Area,
null,
room.ColorAsMaterial,
geomRep,
false,
Guid.NewGuid(),
room.Name));
}
}
var output = new RoomsByLevelsOutputs(rooms.Count / levels.Count, rooms.Count);
foreach (var room in rooms)
{
output.Model.AddElement(room);
}
return(output);
}
/// <summary>
/// The SectionLayout function.
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A SectionLayoutOutputs instance containing computed results and the model with any new elements.</returns>
public static SectionLayoutOutputs Execute(Dictionary <string, Model> inputModels, SectionLayoutInputs input)
{
Envelope envelope = null;
inputModels.TryGetValue("Envelope", out var model);
var height = 0.0;
if (model != null)
{
var envelopes = new List <Envelope>();
envelopes.AddRange(model.AllElementsOfType <Envelope>());
var aboveGradeEnvelopes = envelopes.Where(e => e.Elevation >= 0.0).ToList();
if (aboveGradeEnvelopes.Count() > 0)
{
envelope = aboveGradeEnvelopes.First();
height = envelope.Height - 1.0;
}
}
if (envelope == null)
{
var envMatl = new Material("envelope", new Color(1.0, 1.0, 1.0, 0.2), 0.0f, 0.0f);
height = 10.0;
var footprint = Polygon.Rectangle(60, 40);
var extrude = new Elements.Geometry.Solids.Extrude(footprint, height, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
envelope = new Envelope(footprint, 0.0, height, Vector3.ZAxis, 0.0,
new Transform(), envMatl, geomRep, false, System.Guid.NewGuid(), "");
}
var output = new SectionLayoutOutputs(10);
var grid = new Grid2d(envelope.Profile.Perimeter);
var length = grid.V.Domain.Length;
var width = grid.U.Domain.Length;
//Define Dimensions of non-prdoduct spaces
var entryDepth = 5;
var checkoutDepth = entryDepth + 5;
var percentService = .25;
//var buildingArea = envelope.Profile.Perimeter.Area();
var circulationWidth = input.CirculationWidth;
//Variables driving the division of the main shelf space
var matAlpha = input.Transparency;
if (matAlpha > 1)
{
matAlpha = 1;
}
var _percentProduce = input.PercentProduce;
var _percentPrepared = input.PercentPrepared;
var _percentGeneral = input.PercentGeneral;
var _percentRefrigerated = input.PercentRefrigerated;
var _percentLeft = _percentProduce + _percentPrepared;
var _leftSplit = _percentProduce / (_percentProduce + _percentPrepared);
var totalShelf = _percentLeft + _percentGeneral + _percentRefrigerated;
var percentLeft = _percentLeft / totalShelf;
var percentGeneral = _percentGeneral / totalShelf + percentLeft;
//var percentRefrigerated = _percentRefrigerated / totalShelf;
//Split into rooms front to back
grid.V.SplitAtParameters(new[] { entryDepth / length, checkoutDepth / length, (1 - percentService) });
var mainEntryWidth = 10;
var secEntryWidth = 5;
var mainEntryPosition = .4;
var secEntryPosition = .8;
if (input.EntryRight)
{
mainEntryPosition = 1 - mainEntryPosition;
secEntryPosition = 1 - secEntryPosition;
}
var mainEntryLeft = mainEntryPosition - mainEntryWidth / 2 / length;
var mainEntryRight = mainEntryPosition + mainEntryWidth / 2 / length;
var secEntryLeft = secEntryPosition - secEntryWidth / 2 / length;
var secEntryRight = secEntryPosition + secEntryWidth / 2 / length;
var entryArea = grid.GetCellAtIndices(0, 0);
entryArea.U.SplitAtParameters(new[] { mainEntryLeft, mainEntryRight, secEntryLeft, secEntryRight });
var front1 = entryArea.GetCellAtIndices(0, 0);
var entry1 = entryArea.GetCellAtIndices(1, 0);
var front2 = entryArea.GetCellAtIndices(2, 0);
var entry2 = entryArea.GetCellAtIndices(3, 0);
var front3 = entryArea.GetCellAtIndices(4, 0);
var checkoutArea = grid.GetCellAtIndices(0, 1);
var shelfArea = grid.GetCellAtIndices(0, 2);
var serviceAreaCell = grid.GetCellAtIndices(0, 3);
//Split Shelf Area into sub-rooms
shelfArea.U.SplitAtParameters(new[] { percentLeft, percentGeneral });
var left = shelfArea.GetCellAtIndices(0, 0);
left.V.SplitAtParameter(_leftSplit);
var produce = left.GetCellAtIndices(0, 0);
produce.U.SplitAtParameter(.5);
var produce1 = produce.GetCellAtIndices(0, 0);
var produce2 = produce.GetCellAtIndices(1, 0);
var prepared = left.GetCellAtIndices(0, 1);
var general = shelfArea.GetCellAtIndices(1, 0);
general.V.SplitAtParameter(.5);
var general1 = general.GetCellAtIndices(0, 0);
var general2 = general.GetCellAtIndices(0, 1);
var refrig = shelfArea.GetCellAtIndices(2, 0);
refrig.V.SplitAtParameter(.5);
var refrig1 = refrig.GetCellAtIndices(0, 0);
var refrig2 = refrig.GetCellAtIndices(0, 1);
var entryMaterial = new Material("entry material", new Color(0, 0, 1, matAlpha));
var frontMaterial = new Material("front material", new Color(.9, .7, .7, matAlpha));
var checkoutMaterial = new Material("checkout material", new Color(0, .5, .5, matAlpha));
var serviceMaterial = new Material("service material", new Color(.25, .25, .25, matAlpha));
var produceMaterial = new Material("produce material", new Color(0, 1, 0, matAlpha));
var preparedMaterial = new Material("prepared material", new Color(1, .25, .25, matAlpha));
var generalMaterial = new Material("general material", new Color(1, 0, 0, matAlpha));
var refrigMaterial = new Material("refrigerated material", new Color(.75, .75, 1, matAlpha));
var otherMaterial = new Material("other material", new Color(0, 0, 0, matAlpha));
//Label and return rooms --> shelf area excluded due to inclusion of sub-rooms
//AddRoomFromCell(entryArea, "entry", entryMaterial, output.model, circulationWidth);
AddRoomFromCell(front1, "front1", frontMaterial, output.model, circulationWidth, height);
AddRoomFromCell(entry1, "entrance1", entryMaterial, output.model, circulationWidth, height);
AddRoomFromCell(front2, "front2", frontMaterial, output.model, circulationWidth, height);
AddRoomFromCell(entry2, "entrance2", entryMaterial, output.model, circulationWidth, height);
AddRoomFromCell(front3, "front3", frontMaterial, output.model, circulationWidth, height);
AddRoomFromCell(checkoutArea, "checkout", checkoutMaterial, output.model, circulationWidth, height);
AddRoomFromCell(serviceAreaCell, "service", serviceMaterial, output.model, circulationWidth, height);
AddRoomFromCell(produce1, "produce", produceMaterial, output.model, circulationWidth, height);
AddRoomFromCell(produce2, "produce", produceMaterial, output.model, circulationWidth, height);
AddRoomFromCell(prepared, "prepared", preparedMaterial, output.model, circulationWidth, height);
AddRoomFromCell(general1, "general", generalMaterial, output.model, circulationWidth, height);
AddRoomFromCell(general2, "general", generalMaterial, output.model, circulationWidth, height);
AddRoomFromCell(refrig1, "refrig", refrigMaterial, output.model, circulationWidth, height);
AddRoomFromCell(refrig2, "refrig", refrigMaterial, output.model, circulationWidth, height);
//Create wall between service space and rest of the building
var wallThickness = new Vector3(0, .5, 0);
var cellSeps = serviceAreaCell.GetCellSeparators(GridDirection.U);
var servSep = cellSeps[0];
var wallPt1 = servSep.PointAt(0);
var wallPt4 = servSep.PointAt(1) + wallThickness;
var wallProfile = Polygon.Rectangle(wallPt1, wallPt4);
wallProfile = wallProfile.FitMost(envelope.Profile.Perimeter.Offset(-0.1).First());
var serviceWall = new Wall(wallProfile, height);
output.model.AddElement(serviceWall);
return(output);
}
/// <summary>
/// The ProduceLayout function.
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A ProduceLayoutOutputs instance containing computed results and the model with any new elements.</returns>
public static ProduceLayoutOutputs Execute(Dictionary <string, Model> inputModels, ProduceLayoutInputs input)
{
// convert the inputs to meters
var minAisle = input.MinAisleWidth / 39.37;
if (minAisle == 0)
{
minAisle = 1;
}
ProduceLayoutOutputs output = new ProduceLayoutOutputs();
Model model = null;
IList <Room> rooms = null;
//test inputModels.Clear();
// we want Departments as inputs!
if (inputModels.TryGetValue("Departments", out model))
{
rooms = model.AllElementsOfType <Room>().ToList();
}
else
{
throw new ApplicationException("Need Departments as input!");
model = new Model();
// default:
double inputLength = 100;
double inputWidth = 30;
double inputHeight = 5;
var rectangle = Polygon.Rectangle(inputLength, inputWidth);
var mass = new Mass(rectangle, inputHeight);
output.model.AddElement(mass);
var material = new Material("office", new Color(0, 0, 1.0, 0.5));
var solid = new Elements.Geometry.Solids.Extrude(rectangle, inputHeight, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
solid
});
Room r = new Room(rectangle, Vector3.ZAxis, "Section 1", "100", "produce", "100", rectangle.Area(),
1.0, 0, 0, inputHeight, rectangle.Area(), new Transform(), material, geomRep, false, System.Guid.NewGuid(), "Section 1");
model.AddElement(r);
rooms = new List <Room>();
rooms.Add(r);
}
// ok, now the real work begins... from the room
// this function only deals with certain departments.
var appropriateRooms =
rooms.Where(r => r.Department == "produce");
if (appropriateRooms.Count() == 0)
{
throw new ApplicationException("This function works only on rooms with 'produce' department");
}
foreach (var r in appropriateRooms)
{
// make a 2D grid
var grid = new Elements.Spatial.Grid2d(r.Perimeter, new Transform());
// we want to subdivide:
var geom = grid.V.GetCellGeometry();
var sideLength = grid.V.Domain.Length; //grid.U.GetCellGeometry().Length();
var standardDepth = 0.889; // 35.5"
var standardWidth = 1.22; // 48"
double available = sideLength - (2.0 * standardDepth);
int count = (int)(available / (2 * standardDepth + minAisle));
// debug:
System.Console.WriteLine("side Length: " + sideLength + " available: " + available + " count: " + count);
System.Console.WriteLine("Min Aisle: " + minAisle);
grid.V.DivideByPattern(new double[] { standardDepth, standardDepth, minAisle }, PatternMode.Cycle, FixedDivisionMode.RemainderAtEnd);
grid.U.DivideByFixedLength(standardWidth);
var produce = new Material("Produce", Colors.Gray, 0f, 0f, null, Guid.NewGuid());
// now we will try making the shelving
for (int i = 0; i < grid.V.Cells.Count; i++)
{
for (int j = 0; j < grid.U.Cells.Count; j++)
{
var cell = grid.GetCellAtIndices(j, i);
// make a poly from each gridcell
// shelf, shelf, aisle
int c = i + 1;
if (((c % 3) == 0))
{
// we skip for the aisle
}
else
{
var height = 0.9;
var material = new Material(Colors.Brown, 0, 0, Guid.NewGuid(), "ProduceBase");
var shelfMass = new Mass((Polygon)cell.GetCellGeometry(), height, material);
// for the angled base, start by copying it up.
var p = (Polygon)cell.GetCellGeometry();
p.Transform(new Transform(0, 0, height));
Vector3 tmpOrigin = p.Vertices.First();
double rotAngle = 30;
if ((c % 3) == 2)
{
tmpOrigin = p.Vertices[2];
rotAngle = -30;
}
// this is dumb. But it's a hackathon
p.Transform(new Transform(-1 * tmpOrigin.X, -1 * tmpOrigin.Y, -1 * tmpOrigin.Z));
var rotate = new Transform();
rotate.Rotate(Vector3.XAxis, rotAngle);
p.Transform(rotate);
p.Transform(new Transform(tmpOrigin.X, tmpOrigin.Y, tmpOrigin.Z));
var angle = new Elements.Geometry.Solids.Lamina(p, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
angle
});
var envelope = new Envelope(p, 0.0, height, Vector3.ZAxis, 0.0,
new Transform(), produce, geomRep, false, System.Guid.NewGuid(), "");
output.model.AddElement(shelfMass);
output.model.AddElement(envelope);
}
}
}
}
return(output);
}
/// <summary>
/// The RefrigeratedLayout function.
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A RefrigeratedLayoutOutputs instance containing computed results and the model with any new elements.</returns>
public static RefrigeratedLayoutOutputs Execute(Dictionary <string, Model> inputModels, RefrigeratedLayoutInputs input)
{
var output = new RefrigeratedLayoutOutputs();
// convert the inputs to meters
var doorSize = input.DoorSize / 39.37;
var minAisle = input.MinAisleWidth / 39.37;
Model model = null;
IList <Room> rooms = null;
// we want Departments as inputs!
if (inputModels.TryGetValue("Departments", out model))
{
rooms = model.AllElementsOfType <Room>().ToList();
}
else
{
//throw new ApplicationException("Need Departments as input!");
model = new Model();
// default:
double inputLength = 100;
double inputWidth = 30;
double inputHeight = 5;
var rectangle = Polygon.Rectangle(inputLength, inputWidth);
var mass = new Mass(rectangle, inputHeight);
output.model.AddElement(mass);
var material = new Material("office", new Color(0, 0, 1.0, 0.5));
var solid = new Elements.Geometry.Solids.Extrude(rectangle, inputHeight, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
solid
});
Room r = new Room(rectangle, Vector3.ZAxis, "Section 1", "100", "refrig", "100", rectangle.Area(),
1.0, 0, 0, inputHeight, rectangle.Area(), new Transform(), material, geomRep, false, System.Guid.NewGuid(), "Section 1");
model.AddElement(r);
rooms = new List <Room>();
rooms.Add(r);
}
// ok, now the real work begins... from the room
// this function only deals with certain departments.
var appropriateRooms =
rooms.Where(r => r.Department == "refrig");
if (appropriateRooms.Count() == 0)
{
throw new ApplicationException("This function works only on rooms with 'refrig' department");
}
foreach (var r in appropriateRooms)
{
// make a 2D grid
var grid = new Elements.Spatial.Grid2d(r.Perimeter, new Transform());
// we want to subdivide:
var side1 = r.Perimeter.Segments().First();
var side2 = r.Perimeter.Segments()[1];
var geom = grid.U.GetCellGeometry();
var sideLength = grid.U.Domain.Length; //grid.U.GetCellGeometry().Length();
var standardDepth = 0.889; // 35.5"
double available = sideLength - (2.0 * standardDepth);
int count = (int)(available / (2 * standardDepth + input.MinAisleWidth));
// debug:
System.Console.WriteLine("sideLength: " + sideLength + " available: " + available + " count: " + count);
grid.U.DivideByPattern(new double[] { standardDepth, standardDepth, minAisle }, PatternMode.Cycle, FixedDivisionMode.RemainderAtEnd);
grid.V.DivideByFixedLength(doorSize);
// now we will try making the shelving
for (int i = 0; i < grid.U.Cells.Count; i++)
{
for (int j = 0; j < grid.V.Cells.Count; j++)
{
var cell = grid.GetCellAtIndices(i, j);
// make a poly from each gridcell
// shelf, shelf, aisle
int c = i + 1;
if (((c % 3) == 0))
{
// we skip for the aisle
}
else
{
var height = 2.0;
var material = new Material(Colors.Gray, 0, 0, Guid.NewGuid(), "Refrigerator");
var shelfMass = new Mass((Polygon)cell.GetCellGeometry(), height, material);
output.model.AddElement(shelfMass);
}
}
}
}
return(output);
}
/// <summary>
///
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A SpaceSubdivide2Outputs instance containing computed results and the model with any new elements.</returns>
public static SpaceSubdivide2Outputs Execute(Dictionary <string, Model> inputModels, SpaceSubdivide2Inputs input)
{
var output = new SpaceSubdivide2Outputs();
Elements.Geometry.Solids.Extrude extrude;
Representation geomRep;
var envelopes = new List <Envelope>();
var envMatl = new Material("envelope", new Color(0.3, 0.7, 0.7, 0.6), 0.0f, 0.0f);
List <ModelCurve> modelCurves = new List <ModelCurve>();
List <Polygon> offsetcrvs = new List <Polygon>();
List <Polygon> jigs = new List <Polygon>();
var centerlines = input.CenterLines;
var sketch = input.Sketch;
// var outlines = new List<Polyline>();
// var stuff = new
foreach (var item in centerlines)
{
offsetcrvs.Add(item.Offset(2, EndType.Square).First());
}
offsetcrvs.Add(sketch);
foreach (var item in offsetcrvs)
{
jigs.AddRange(item.Jigsaw());
}
foreach (var crv in offsetcrvs)
{
modelCurves.Add(new ModelCurve(crv));
}
foreach (var crv in jigs)
{
modelCurves.Add(new ModelCurve(crv));
}
var BuildingHeight = 30;
foreach (var item in offsetcrvs)
{
extrude = new Elements.Geometry.Solids.Extrude(item, BuildingHeight, Vector3.ZAxis, false);
geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
envelopes.Add(new Envelope(item, 0.0, BuildingHeight, Vector3.ZAxis, 0.0,
new Transform(), envMatl, geomRep, false, Guid.NewGuid(), ""));
}
output.Model.AddElements(envelopes);
output.Model.AddElements(modelCurves);
return(output);
}
/// <summary>
/// Create a staircase of a given width aligned along a line
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A StaircaseFromLineOutputs instance containing computed results and the model with any new elements.</returns>
public static StaircaseFromLineOutputs Execute(Dictionary <string, Model> inputModels, StaircaseFromLineInputs input)
{
if (input.StaircaseAxe == null)
{
throw new ArgumentException("Please draw the axe of the staircase.");
}
var levels = new List <Level>();
inputModels.TryGetValue("Levels", out var model);
if (model == null || model.AllElementsOfType <Level>().Count() == 0)
{
throw new ArgumentException("No Level found.");
}
levels.AddRange(model.AllElementsOfType <Level>());
levels = levels.OrderBy(l => l.Elevation).ToList();
//Build a polygon aligned with the line
Line stairCaseAxe = input.StaircaseAxe;
// stairCaseAxe.Direction
double uniteDePassage = input.Width;
if (uniteDePassage == 0)
{
throw new ArgumentException("Can't create a stair with no width.");
}
double runWidth = 0;
double thread = 0.3;
double maxRiser = 0.14;
double levelHeight = 3.5;
double structuralDepth = 0.175;
if (uniteDePassage == 1)
{
runWidth = 0.9;
}
else if (uniteDePassage == 2)
{
runWidth = 1.4;
}
else
{
runWidth = 0.6 * uniteDePassage;
}
double wallWidth = 0.2;
double landingWidth = 2.5;
double realLandingWidth = Math.Max(landingWidth, runWidth);
double runLengh = Math.Ceiling(Math.Ceiling(levelHeight / maxRiser) / 2) * thread;
double totalLenght = wallWidth * 2 + runWidth + realLandingWidth + runLengh;
double totalWidth = wallWidth + runWidth + wallWidth + runWidth + wallWidth;
Vector3 widthDirection = Vector3.ZAxis.Cross(stairCaseAxe.Direction()).Negate();
Vector3 footprintWidth = widthDirection * totalWidth;
Vector3 footprintLenght = stairCaseAxe.Direction() * totalLenght;
Polygon staircaseFoorprint = new Polygon(new List <Vector3> {
stairCaseAxe.Start,
stairCaseAxe.Start + footprintLenght,
stairCaseAxe.Start + footprintLenght + footprintWidth,
stairCaseAxe.Start + footprintWidth,
});
var envelopeMatl = new Material("envelope", new Color(0.3, 0.7, 0.7, 0.2), 0.0f, 0.0f);
var stairEnclosures = new List <StairEnclosure>();
var stairs = new List <Stair>();
var extrude = new Elements.Geometry.Solids.Extrude(staircaseFoorprint, levels.Last().Elevation, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
stairEnclosures.Add(new StairEnclosure(staircaseFoorprint, Vector3.ZAxis, 0.0, 0.0, levels.Last().Elevation, staircaseFoorprint.Area(), "1",
new Transform(), envelopeMatl, geomRep, false, Guid.NewGuid(), ""));
Vector3 stairPathStart = stairCaseAxe.Start + widthDirection * (wallWidth + runWidth / 2);
Vector3 secondFlightPathStart = stairPathStart + stairCaseAxe.Direction() * runLengh + widthDirection * (runWidth + wallWidth);
List <Line> stairPaths = new List <Line> {
new Line(stairPathStart, stairPathStart + stairCaseAxe.Direction() * runLengh),
new Line(secondFlightPathStart, secondFlightPathStart + stairCaseAxe.Direction().Negate() * runLengh)
};
StairMaker stairMaker = new StairMaker(maxRiser, thread, structuralDepth, runWidth, stairPaths, levels);
var output = new StaircaseFromLineOutputs(2);
output.Model.AddElements(stairEnclosures);
output.Model.AddElements(stairMaker.Stairs);
return(output);
}
/// <summary>
/// Generates a Roof from a DXF Polyline and supplied elevation and thickness values.
/// </summary>
/// <param name="model">The input model.</param>
/// <param name="input">The arguments to the execution.</param>
/// <returns>A RoofByDXFOutputs instance containing computed results and the model with any new elements.</returns>
public static RoofByDXFOutputs Execute(Dictionary <string, Model> inputModels, RoofByDXFInputs input)
{
DxfFile dxfFile;
using (FileStream fs = new FileStream(input.DXF.LocalFilePath, FileMode.Open))
{
dxfFile = DxfFile.Load(fs);
}
var polygons = new List <Polygon>();
foreach (DxfEntity entity in dxfFile.Entities)
{
if (entity.EntityType != DxfEntityType.LwPolyline)
{
continue;
}
var pline = (DxfLwPolyline)entity;
if (pline.IsClosed == false)
{
continue;
}
var vertices = pline.Vertices.ToList();
var verts = new List <Vector3>();
vertices.ForEach(v => verts.Add(new Vector3(v.X, v.Y)));
polygons.Add(new Polygon(verts));
}
if (polygons.Count == 0)
{
throw new ArgumentException("No LWPolylines found in DXF.");
}
polygons = polygons.OrderByDescending(p => Math.Abs(p.Area())).ToList();
var polygon = polygons.First().IsClockWise() ? polygons.First().Reversed() : polygons.First();
polygons = polygons.Skip(1).ToList();
polygons.ForEach(p => p = p.IsClockWise() ? p : p.Reversed());
var polys = new List <Polygon>();
foreach (var poly in polygons)
{
if (!polygon.Contains(poly))
{
continue;
}
if (!poly.IsClockWise())
{
polys.Add(poly.Reversed());
continue;
}
polys.Add(poly);
}
polys.Insert(0, polygon);
var shape = new Profile(polys);
var extrude = new Elements.Geometry.Solids.Extrude(shape, input.RoofThickness, Vector3.ZAxis, false);
var geomRep = new Representation(new List <Elements.Geometry.Solids.SolidOperation>()
{
extrude
});
var roofMatl = BuiltInMaterials.Concrete;
var roof = new Roof(shape,
input.RoofElevation,
input.RoofThickness,
shape.Area(),
new Transform(0.0, 0.0, input.RoofElevation - input.RoofThickness),
roofMatl,
geomRep,
false,
Guid.NewGuid(), "");
var output = new RoofByDXFOutputs(shape.Area());
output.Model.AddElement(roof);
return(output);
}
