//--------------------------------------------------------------------------------------------------
void _ValueHudElement_AngleEntered(ValueHudElement hudElement, double newValue)
{
if (newValue == 0)
{
return;
}
var startPoint = _Points[0];
if (startPoint.Distance(_CenterPoint) <= 0)
{
return;
}
var xAxis = new Ax2d(_CenterPoint, new Dir2d(new Vec2d(_CenterPoint, startPoint)));
var radius = _CenterPoint.Distance(startPoint);
var circ = new gp_Circ2d(xAxis, radius, _ArcDirection);
var startParameter = ElCLib.Parameter(circ, startPoint);
var endParameter = startParameter + newValue.ToRad();
var endPoint = ElCLib.Value(endParameter, circ);
_ArcDirection = newValue < 0;
if (!_CalcArcRimPoints(endPoint))
{
return;
}
_MergePointIndices[1] = -1;
_MergePointIndices[2] = -1;
_PointsCompleted++;
_SketchEditorTool.FinishSegmentCreation(_Points, _MergePointIndices, new SketchSegment[] { _Segment }, null);
}
//--------------------------------------------------------------------------------------------------
bool _CalcArcRimPoints(Pnt2d endPoint)
{
// Project end point on circle
var startPoint = _Points[0];
if ((startPoint.Distance(endPoint) <= 0) || (endPoint.Distance(_CenterPoint) <= 0) || (startPoint.Distance(_CenterPoint) <= 0))
{
return(false);
}
var xAxis = new Ax2d(_CenterPoint, new Dir2d(new Vec2d(_CenterPoint, startPoint)));
var radius = _CenterPoint.Distance(startPoint);
var circ = new gp_Circ2d(xAxis, radius, _ArcDirection);
var projEndPoint = new Geom2dAPI_ProjectPointOnCurve(endPoint, new Geom2d_Circle(circ)).NearestPoint();
// Check if we should toggle the direction
var endParameter = ElCLib.Parameter(circ, projEndPoint);
// If the last parameter was very small (~PI/2), and the current is very high (~PI*1.5), toggle direction
if (((_LastEndParameter < 1) && (endParameter > 5)) ||
((endParameter < 1) && (_LastEndParameter > 5)))
{
_ArcDirection = !_ArcDirection;
circ = new gp_Circ2d(xAxis, radius, _ArcDirection);
endParameter = ElCLib.Parameter(circ, projEndPoint);
}
_LastEndParameter = endParameter;
// Calc rim point
var rimPoint = ElCLib.Value(endParameter / 2, circ);
_Points[1] = projEndPoint;
_Points[2] = rimPoint;
return(true);
}
//--------------------------------------------------------------------------------------------------
bool _CalcArcRimPoints(Pnt2d endPoint, int mergeCandidateIndex = -1)
{
// Project end point on circle
if ((_StartPoint.Distance(endPoint) <= 0) || (endPoint.Distance(_CenterPoint) <= 0) || (_StartPoint.Distance(_CenterPoint) <= 0))
{
return(false);
}
var ellipse = Core.Geom.Geom2dUtils.MakeEllipse(_CenterPoint, _StartPoint, endPoint, _ArcDirection);
if (ellipse == null)
{
return(false);
}
// If the last parameter was small (a*0.25), and the current is high (a*0.5), toggle direction
var startParameter = ElCLib.Parameter(ellipse, _StartPoint);
var endParameter = ElCLib.Parameter(ellipse, endPoint);
var maxParameter = Math.Max(startParameter, endParameter);
if (((startParameter > endParameter) && _LastParameterWasEnd) ||
((startParameter < endParameter) && !_LastParameterWasEnd))
{
_LastEndParameter = maxParameter;
_LastParameterWasEnd = !_LastParameterWasEnd;
}
else
{
if (maxParameter > 0.0001)
{
var qa = ellipse.MajorRadius() / 4;
if (((_LastEndParameter < qa) && (maxParameter > qa * 2)) ||
((maxParameter < qa) && (_LastEndParameter > qa * 2)))
{
_ArcDirection = !_ArcDirection;
ellipse = Core.Geom.Geom2dUtils.MakeEllipse(_CenterPoint, _StartPoint, endPoint, _ArcDirection);
// Debug.WriteLine("Toggle direction");
}
// Debug.WriteLine("New: {0} Last: {1}", maxParameter, _LastEndParameter);
_LastEndParameter = maxParameter;
}
}
// Catch points
if (_ArcDirection)
{
_Points[1] = _StartPoint;
_MergePointIndices[1] = _StartPointMergeIndex;
_Points[2] = endPoint;
_MergePointIndices[2] = mergeCandidateIndex;
}
else
{
_Points[1] = endPoint;
_MergePointIndices[1] = mergeCandidateIndex;
_Points[2] = _StartPoint;
_MergePointIndices[2] = _StartPointMergeIndex;
}
return(true);
}
//--------------------------------------------------------------------------------------------------
void _ImportArcSegment(SvgPathSegArc svgSegment, ref int startPoint)
{
var radiusX = svgSegment.RadiusX;
var radiusY = svgSegment.RadiusY;
var rotation = -svgSegment.Angle.ToRad();
var startPnt2d = svgSegment.Start;
var endPnt2d = svgSegment.End;
var centerPnt2d = Geom2dUtils.FindEllipseCenterFromEndpoints(
startPnt2d, endPnt2d,
radiusX, radiusY, rotation,
(int)svgSegment.Size != (int)svgSegment.Sweep);
// Do we have a circle arc?
if (Math.Abs(radiusX - radiusY) < 0.0001)
{
var axis = Ax2d.OX.Rotated(Pnt2d.Origin, rotation).Translated(centerPnt2d.ToVec());
var circ = new gp_Circ2d(axis, radiusX, svgSegment.Sweep != SvgArcSweep.Positive);
//Debug.WriteLine("StartParam: {0} - EndParam: {1}", ElCLib.Parameter(circ, startPnt2d), ElCLib.Parameter(circ, endPnt2d));
var startParam = ElCLib.Parameter(circ, startPnt2d);
var endParam = ElCLib.Parameter(circ, endPnt2d);
if (endParam < startParam)
{
endParam += 2 * Math.PI;
}
var rimPnt2d = ElCLib.Value(startParam + (endParam - startParam) / 2, circ);
var endPoint = _AddPoint(endPnt2d);
_Segments.Add(new SketchSegmentArc(startPoint, endPoint, _AddPoint(rimPnt2d)));
startPoint = endPoint;
}
else
{
// No, we have a elliptical arc
// Construct ellipse, convert to bezier
var axis = Ax2d.OX.Rotated(Pnt2d.Origin, rotation).Translated(centerPnt2d.ToVec());
var ellipse = new gp_Elips2d(axis, radiusX, radiusY, svgSegment.Sweep != SvgArcSweep.Positive);
var startParam = ElCLib.Parameter(ellipse, startPnt2d);
var endParam = ElCLib.Parameter(ellipse, endPnt2d);
if (double.IsNaN(startParam) || double.IsNaN(endParam))
{
Messages.Warning("Invalid elliptical arc found in SVG file.");
return;
}
var bezierPointArray = Geom2dUtils.EllipticalArcToBezier(ellipse, startParam, endParam);
foreach (var bezierPoints in bezierPointArray)
{
var endPoint = _AddPoint(bezierPoints.p2);
_Segments.Add(new SketchSegmentBezier(startPoint, _AddPoint(bezierPoints.c1), _AddPoint(bezierPoints.c2), endPoint));
startPoint = endPoint;
}
}
}
//--------------------------------------------------------------------------------------------------
public gp_Elips2d GetEllipse(Dictionary <int, Pnt2d> points, double[] parameters = null)
{
var p1 = points[Points[0]];
var p2 = points[Points[1]];
var center = points[Points[2]];
var ellipse = Geom.Geom2dUtils.MakeEllipse(center, p1, p2);
if (ellipse != null && parameters != null)
{
Debug.Assert(parameters.Length == 2);
parameters[0] = ElCLib.Parameter(ellipse, p1);
parameters[1] = ElCLib.Parameter(ellipse, p2);
}
return(ellipse);
}
//--------------------------------------------------------------------------------------------------
public gp_Circ2d GetCircle(Dictionary <int, Pnt2d> points, double[] parameter = null)
{
var start = points[Points[0]];
var end = points[Points[1]];
var rim = points[Points[2]];
if ((start.Distance(end) <= 0) || (end.Distance(rim) <= 0) || (start.Distance(rim) <= 0))
{
return(null);
}
var circ = new gce_MakeCirc2d(start, rim, end).Value();
if (circ != null && parameter != null)
{
Debug.Assert(parameter.Length == 2);
parameter[0] = ElCLib.Parameter(circ, start);
parameter[1] = ElCLib.Parameter(circ, end);
}
return(circ);
}
//--------------------------------------------------------------------------------------------------
public override Geom2d_Curve MakeCurve(Dictionary <int, Pnt2d> points)
{
try
{
var p1 = points[Points[0]];
var p2 = points[Points[1]];
if (p1.Distance(p2) <= 0)
{
return(null);
}
var line = GetLine(points);
if (line == null)
{
return(null);
}
return(new Geom2d_TrimmedCurve(new Geom2d_Line(line), ElCLib.Parameter(line, p1), ElCLib.Parameter(line, p2)));
}
catch (Exception)
{
return(null);
}
}
//--------------------------------------------------------------------------------------------------
void _ValueHudElement_RadiusEntered(ValueHudElement hudElement, double newValue)
{
if (newValue == 0)
{
return;
}
if (_Points[0].Distance(_Points[1]) == 0)
{
return;
}
var center = Geom2dUtils.FindEllipseCenterFromEndpoints(_Points[0], _Points[1], newValue, newValue, 0, newValue > 0);
var xAxis = new Ax2d(center, new Dir2d(new Vec2d(center, _Points[0])));
var radius = center.Distance(_Points[0]);
var circ = new gp_Circ2d(xAxis, radius, newValue < 0);
var endParameter = ElCLib.Parameter(circ, _Points[1]);
_Points[2] = ElCLib.Value(endParameter / 2, circ);
_MergePointIndices[2] = -1;
_PointAction.Stop();
_SketchEditorTool.FinishSegmentCreation(_Points, _MergePointIndices, new SketchSegment[] { _Segment }, null);
}