public override void OnSetAction()
{
dim = Dimension.Construct();
dim.DimType = Dimension.EDimType.DimAngle;
dim.DimLineRef = ConstrDefaults.DefaultDimPoint;
dim.Normal = base.ActiveDrawingPlane.Normal;
dim.AddPoint(new GeoPoint(0.0, 0.0, 0.0));
dim.AddPoint(new GeoPoint(0.0, 0.0, 0.0));
dim.AddPoint(new GeoPoint(0.0, 0.0, 0.0));
base.ActiveObject = dim;
base.ShowActiveObject = false;
base.TitleId = "Constr.Dimension.Direction.Objects";
curveInput = new CurveInput("Constr.Dimension.Direction.Object1");
curveInput.Decomposed = true; // nur Einzelelemente, auch bei Polyline und Pfad
curveInput.MouseOverCurvesEvent += new CADability.Actions.ConstructAction.CurveInput.MouseOverCurvesDelegate(inputDimCurves);
curveInput.CurveSelectionChangedEvent += new CADability.Actions.ConstructAction.CurveInput.CurveSelectionChangedDelegate(inputDimCurvesChanged);
curve2Input = new CurveInput("Constr.Dimension.Direction.Object2");
curve2Input.Decomposed = true; // nur Einzelelemente, auch bei Polyline und Pfad
curve2Input.MouseOverCurvesEvent += new CADability.Actions.ConstructAction.CurveInput.MouseOverCurvesDelegate(input2DimCurves);
curve2Input.CurveSelectionChangedEvent += new CADability.Actions.ConstructAction.CurveInput.CurveSelectionChangedDelegate(input2DimCurvesChanged);
dimLocationInput = new GeoPointInput("Constr.Dimension.Location");
dimLocationInput.DefaultGeoPoint = ConstrDefaults.DefaultDimPoint;
dimLocationInput.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(SetDimLocation);
base.SetInput(curveInput, curve2Input, dimLocationInput);
base.ShowAttributes = true;
base.OnSetAction();
}
public void InsertGeoPoint(int Index, GeoPoint ThePoint)
{
if (dim.PointCount >= 2)
{ // nach dem 2.Punkt ist keine Änderung der Methode mehr möglich!
dimMethod.ReadOnly = true;
// Testen, ob eine Bemassung getroffen wurde
GeoObjectList li = base.GetObjectsUnderCursor(base.CurrentMousePoint);
if (Settings.GlobalSettings.GetBoolValue("Dimension.AutoExtend", true)) // eingeführt am 30.08.2016
{
for (int i = 0; i < li.Count; ++i)
{
if (li[i] is Dimension)
{ // die getroffene Bem. nutzen
Dimension dimTemp = (li[i] as Dimension);
// nur wenn die Typen stimmen!
if ((dimTemp.DimType == Dimension.EDimType.DimPoints) | (dimTemp.DimType == Dimension.EDimType.DimCoord))
{
int ind; // wo getroffen?
Dimension.HitPosition hi = dimTemp.GetHitPosition(base.Frame.ActiveView.Projection, base.ProjectedPoint(CurrentMousePoint), out ind);
if ((hi & Dimension.HitPosition.DimLine) != 0)
{ // jetzt also: neuen Punkt einfügen, der kommt aus dim.
dimTemp.AddPoint(dim.GetPoint(0));
base.ActiveObject = null;
base.OnDone();
dimTemp.SortPoints();
dimTemp.Recalc();
return;
}
}
}
}
}
}
if ((dim.PointCount == 2) & (methodSelect == 0))
{ // ZweiPunktBemassung: Jetzt ist Schluss!
mi.Fixed = true;
if (!dimLocationInput.Fixed)
{
CADability.GeoObject.Point gPoint1 = ActionFeedBack.FeedbackPoint(base.Frame, PointSymbol.Cross);
gPoint1.Location = ThePoint;
base.FeedBack.Add(gPoint1);
base.SetFocus(dimLocationInput, true);
}
else
{
base.OnDone();
}
return;
}
dim.AddPoint(ThePoint);
CADability.GeoObject.Point gPoint = ActionFeedBack.FeedbackPoint(base.Frame, PointSymbol.Cross);
gPoint.Location = ThePoint;
base.FeedBack.Add(gPoint);
}
private bool showDim()
{
if ((dimCurve == null) | (dim2Curve == null) | (dimCurve == dim2Curve))
{
return(false);
}
Plane pl;
if (Curves.GetCommonPlane(dimCurve, dim2Curve, out pl))
{
ICurve2D l2D1 = dimCurve.GetProjectedCurve(pl);
if (l2D1 is Path2D)
{
(l2D1 as Path2D).Flatten();
}
ICurve2D l2D2 = dim2Curve.GetProjectedCurve(pl);
if (l2D2 is Path2D)
{
(l2D2 as Path2D).Flatten();
}
GeoPoint2D dim2DP1, dim2DP2, dimLoc;
dimLoc = pl.Project(objectPoint);
double dist = Curves2D.SimpleMinimumDistance(l2D1, l2D2, dimLoc, out dim2DP1, out dim2DP2);
if (dist > 0)
{ // eine gültige Bemassung kann gemacht werden
GeoPoint dimP1 = pl.ToGlobal(dim2DP1);
GeoPoint dimP2 = pl.ToGlobal(dim2DP2);
dim.DimLineDirection = new GeoVector(dimP1, dimP2);
if (!dimLocationInput.Fixed)
{
dim.DimLineRef = new GeoPoint(dimP1, dimP2);
}
if (dim.PointCount == 0)
{
dim.AddPoint(dimP1);
dim.AddPoint(dimP2);
}
else
{
dim.SetPoint(0, dimP1);
dim.SetPoint(1, dimP2);
}
base.ShowActiveObject = true;
return(true);
}
}
base.ShowActiveObject = false;
return(false);
}
public override void OnSetAction()
{
base.TitleId = "Constr.Dimension.Direction.4Points";
dim = Dimension.Construct();
dim.DimType = Dimension.EDimType.DimAngle;
dim.DimLineRef = ConstrDefaults.DefaultDimPoint;
dim.Normal = base.ActiveDrawingPlane.Normal;
dim.AddPoint(new GeoPoint(0.0, 0.0, 0.0));
dim.AddPoint(new GeoPoint(0.0, 0.0, 0.0));
dim.AddPoint(new GeoPoint(0.0, 0.0, 0.0));
gPoint1 = ActionFeedBack.FeedbackPoint(base.Frame);
gPoint2 = ActionFeedBack.FeedbackPoint(base.Frame);
gPoint3 = ActionFeedBack.FeedbackPoint(base.Frame);
gPoint4 = ActionFeedBack.FeedbackPoint(base.Frame);
base.FeedBack.Add(gPoint1);
base.FeedBack.Add(gPoint2);
base.FeedBack.Add(gPoint3);
base.FeedBack.Add(gPoint4);
base.ActiveObject = dim;
dimPoint1Input = new GeoPointInput("Constr.Dimension.Direction.4Points.Point1");
dimPoint1Input.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(SetDimPoint1);
dimPoint2Input = new GeoPointInput("Constr.Dimension.Direction.4Points.Point2");
dimPoint2Input.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(SetDimPoint2);
dimPoint3Input = new GeoPointInput("Constr.Dimension.Direction.4Points.Point3");
dimPoint3Input.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(SetDimPoint3);
dimPoint4Input = new GeoPointInput("Constr.Dimension.Direction.4Points.Point4");
dimPoint4Input.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(SetDimPoint4);
dimLocationInput = new GeoPointInput("Constr.Dimension.Location");
dimLocationInput.DefaultGeoPoint = ConstrDefaults.DefaultDimPoint;
dimLocationInput.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(SetDimLocation);
base.SetInput(dimPoint1Input, dimPoint2Input, dimPoint3Input, dimPoint4Input, dimLocationInput);
base.ShowAttributes = true;
base.OnSetAction();
}
private void DimLocationOnMouseClick(bool up, GeoPoint MousePosition, IView View)
{
if ((up & (dimAddTo != null)))
{ // also: er will einen Punkt (dim.GetPoint(0)) zu einer bestehenden Label-Bem. (dimAddTo) zufügen
if ((dimMethodPoint & curveInput.Fixed) | (!dimMethodPoint & dimPointInput.Fixed))
{ // nur, wenn der Punkt auf die ein oder andere Weise bestimmt ist
dimAddTo.AddPoint(dim.GetPoint(0));
// jetzt: schnell raus aus allem!
base.ActiveObject = null;
base.OnDone();
return;
}
}
}
public void InsertGeoPoint(int Index, GeoPoint ThePoint)
{
if (Index == -1)
{
dimension.AddPoint(ThePoint);
}
else
{
throw new NotImplementedException("Dimension: InsertGeoPoint");
}
Opened(false);
Init();
propertyPage.Refresh(this);
propertyPage.OpenSubEntries(points, true);
}
public override void OnSetAction()
{
dim = Dimension.Construct();
if (dimArcType == DimArcType.Radius)
{
idString = "Constr.Dimension.Arc.Radius";
dim.DimType = Dimension.EDimType.DimRadius;
}
else
{
idString = "Constr.Dimension.Arc.Diameter";
dim.DimType = Dimension.EDimType.DimDiameter;
}
dim.DimLineRef = ConstrDefaults.DefaultDimPoint;
dim.Normal = base.ActiveDrawingPlane.Normal;
dim.AddPoint(new GeoPoint(0.0, 0.0, 0.0));
base.TitleId = idString;
base.ActiveObject = dim;
CurveInput curveInput = new CurveInput("Constr.Dimension.Arc.Object");
curveInput.Decomposed = true; // nur Einzelelemente, auch bei Polyline und Pfad
curveInput.MouseOverCurvesEvent += new CADability.Actions.ConstructAction.CurveInput.MouseOverCurvesDelegate(inputDimCurves);
curveInput.CurveSelectionChangedEvent += new CADability.Actions.ConstructAction.CurveInput.CurveSelectionChangedDelegate(inputDimCurvesChanged);
GeoPointInput dimLocationInput = new GeoPointInput("Constr.Dimension.Location");
dimLocationInput.DefaultGeoPoint = ConstrDefaults.DefaultDimPoint;
dimLocationInput.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(SetDimLocation);
base.SetInput(curveInput, dimLocationInput);
base.ShowAttributes = true;
base.ShowActiveObject = false;
base.OnSetAction();
}
public override void OnSetAction()
{
dim = Dimension.Construct();
if (dimLabelType == DimLabelType.Point)
{
idString = "Constr.Dimension.Point";
pointString = "Constr.Dimension.Point.Point";
objectString = "Constr.Dimension.Point.Object";
locationString = "Constr.Dimension.Location";
dim.DimType = Dimension.EDimType.DimLocation;
}
else
{
idString = "Constr.Dimension.Labeling";
pointString = "Constr.Dimension.Labeling.Point";
objectString = "Constr.Dimension.Labeling.Object";
locationString = "Constr.Dimension.Labeling.Location";
dim.DimType = Dimension.EDimType.DimLocation;
}
dim.DimLineRef = ConstrDefaults.DefaultDimPoint;
dim.Normal = base.ActiveDrawingPlane.Normal;
dim.AddPoint(new GeoPoint(0.0, 0.0, 0.0));
dimMethodPoint = ConstrDefaults.DefaultDimensionPointMethod;
base.TitleId = idString;
base.ActiveObject = dim;
base.ShowActiveObject = false;
curveInput = new CurveInput(objectString);
curveInput.Decomposed = true; // nur Einzelelemente, auch bei Polyline und Pfad
curveInput.ReadOnly = !dimMethodPoint;
curveInput.Optional = !dimMethodPoint;
curveInput.MouseOverCurvesEvent += new CADability.Actions.ConstructAction.CurveInput.MouseOverCurvesDelegate(inputDimCurves);
curveInput.CurveSelectionChangedEvent += new CADability.Actions.ConstructAction.CurveInput.CurveSelectionChangedDelegate(inputDimCurvesChanged);
dimPointInput = new GeoPointInput(pointString);
dimPointInput.ReadOnly = dimMethodPoint;
dimPointInput.Optional = dimMethodPoint;
dimPointInput.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(SetDimPoint);
dimLocationInput = new GeoPointInput(locationString);
dimLocationInput.SetGeoPointEvent += new ConstructAction.GeoPointInput.SetGeoPointDelegate(SetDimLocation);
dimLocationInput.MouseClickEvent += new MouseClickDelegate(DimLocationOnMouseClick);
dimStringInput = new StringInput("Constr.Dimension.Labeling.Point.Text");
dimStringInput.SetStringEvent += new CADability.Actions.ConstructAction.StringInput.SetStringDelegate(SetDimString);
dimStringInput.GetStringEvent += new CADability.Actions.ConstructAction.StringInput.GetStringDelegate(GetDimString);
dimMethod = new BooleanInput("Constr.Dimension.Point.Method", "Constr.Dimension.Point.Method.Values");
dimMethod.DefaultBoolean = ConstrDefaults.DefaultDimensionPointMethod;
dimMethod.SetBooleanEvent += new CADability.Actions.ConstructAction.BooleanInput.SetBooleanDelegate(SetMethod);
if (dimLabelType == DimLabelType.Point)
{
base.SetInput(curveInput, dimPointInput, dimLocationInput, dimMethod);
}
else
{
base.SetInput(curveInput, dimPointInput, dimLocationInput, dimStringInput, dimMethod);
}
base.ShowAttributes = true;
base.OnSetAction();
}
