public void RunWithArguments(Document doc, NameValueMap map)
{
LogTrace("Processing " + doc.FullFileName);
try
{
//string dirPath = System.IO.Path.GetDirectoryName(doc.FullDocumentName);
string currentDirPath = System.IO.Directory.GetCurrentDirectory();
#region ExportSAT file
Trace.TraceInformation("Export SAT file.");
TranslatorAddIn oSAT = null;
foreach (ApplicationAddIn item in inventorApplication.ApplicationAddIns)
{
if (item.ClassIdString == "{89162634-02B6-11D5-8E80-0010B541CD80}")
{
Trace.TraceInformation("Finded the PDF addin.");
oSAT = (TranslatorAddIn)item;
break;
}
else
{
}
}
if (oSAT != null)
{
TranslationContext oContext = inventorApplication.TransientObjects.CreateTranslationContext();
NameValueMap oIgesMap = inventorApplication.TransientObjects.CreateNameValueMap();
if (oSAT.get_HasSaveCopyAsOptions(doc, oContext, oIgesMap))
{
Trace.TraceInformation("SAT can be exported.");
Trace.TraceInformation("SAT: Set context type");
oContext.Type = IOMechanismEnum.kFileBrowseIOMechanism;
Trace.TraceInformation("SAT: create data medium");
DataMedium oData = inventorApplication.TransientObjects.CreateDataMedium();
Trace.TraceInformation("SAT save to: " + currentDirPath + "\\export.sat");
oData.FileName = currentDirPath + "\\export.sat";
oIgesMap.set_Value("GeometryType", 1);
oSAT.SaveCopyAs(doc, oContext, oIgesMap, oData);
Trace.TraceInformation("SAT exported.");
}
#endregion
GetListOfDirectory(System.IO.Directory.GetCurrentDirectory());
}
}
catch (Exception e)
{
LogError("Processing failed. " + e.ToString());
}
}
public void ExportSAT(Document doc)
{
string currentDirectory = System.IO.Directory.GetCurrentDirectory();
LogTrace("Export SAT file.");
TranslatorAddIn SAT_AddIn = (TranslatorAddIn)_inventorApplication.ApplicationAddIns.ItemById["{89162634-02B6-11D5-8E80-0010B541CD80}"];
if (SAT_AddIn == null)
{
LogTrace("Could not access to SAT translator ...");
return;
}
TranslationContext oContext = _inventorApplication.TransientObjects.CreateTranslationContext();
NameValueMap map = _inventorApplication.TransientObjects.CreateNameValueMap();
if (SAT_AddIn.get_HasSaveCopyAsOptions(doc, oContext, map))
{
LogTrace("SAT: Set context type");
oContext.Type = IOMechanismEnum.kFileBrowseIOMechanism;
LogTrace("SAT: create data medium");
DataMedium oData = _inventorApplication.TransientObjects.CreateDataMedium();
LogTrace("SAT save to: " + currentDirectory + "\\export.sat");
oData.FileName = currentDirectory + "\\export.sat";
map.set_Value("GeometryType", 1);
SAT_AddIn.SaveCopyAs(doc, oContext, map, oData);
LogTrace("SAT exported.");
}
}
private void TranslatorSave(Inventor.Application application, object saveDataIn, string name)
{
try
{
//translator object does all the complicated saving
TranslatorAddIn tAddIn = (TranslatorAddIn)application.ApplicationAddIns.ItemById["{81CA7D27-2DBE-4058-8188-9136F85FC859}"];
//the document that we are saving
object saveData = saveDataIn;
//translator context holds the IOMechanism, don't worry about it
TranslationContext context = application.TransientObjects.CreateTranslationContext();
context.Type = IOMechanismEnum.kFileBrowseIOMechanism;
//options hold all the options of the save, like quality and file structure
NameValueMap options = application.TransientObjects.CreateNameValueMap();
//these options are needed in case the inventor defaults change
options.Value["ExportFileStructure"] = 0; //make sure all parts are saved as seperate files
options.Value["Resolution"] = 20; //low resolution save (0 for high, 1 for medium)
options.Value["ExportColor"] = true; //makes sure color is exported
//the data medium holds the destination
DataMedium dataMed = application.TransientObjects.CreateDataMedium();
dataMed.FileName = path + name + ".stl";
//calls the save
tAddIn.SaveCopyAs(saveData, context, options, dataMed);
}
catch (Exception e)
{
MessageBox.Show(e.ToString());
}
}
public static bool saveDwg(string pathToSave, DrawingDocument oDoc)
{
TranslatorAddIn DWGAddIn = (TranslatorAddIn)iApp.ApplicationAddIns.ItemById["{C24E3AC2-122E-11D5-8E91-0010B541CD80}"];
TranslationContext oContext = iApp.TransientObjects.CreateTranslationContext();
oContext.Type = IOMechanismEnum.kFileBrowseIOMechanism;
NameValueMap oOptions = iApp.TransientObjects.CreateNameValueMap();
DataMedium oDataMedium = iApp.TransientObjects.CreateDataMedium();
if (DWGAddIn.HasSaveCopyAsOptions[oDoc, oContext, oOptions])
{
string strIniFile = "C:\\Users\\edgesuser\\Desktop\\DWG-DXF\\test.ini";
oOptions.Value["Export_Acad_IniFile"] = strIniFile;
oOptions.Value["Sheet_Range"] = PrintRangeEnum.kPrintAllSheets;
}
string[] oldName = System.Text.RegularExpressions.Regex.Split(oDoc.DisplayName, "\\.");
oDataMedium.FileName = "C:\\Users\\edgesuser\\Desktop\\DWG-DXF\\" + oldName[0] + ".dwg";
DWGAddIn.SaveCopyAs(oDoc, oContext, oOptions, oDataMedium);
return(true);
}
public void WriteSTLFiles(string outputfolder)
{
Inventor.Application _invApp = Links[0].Application;
TranslatorAddIn stptrans = (TranslatorAddIn)_invApp.ApplicationAddIns.ItemById["{533E9A98-FC3B-11D4-8E7E-0010B541CD80}"];
TranslationContext stpcontext = _invApp.TransientObjects.CreateTranslationContext();
NameValueMap stpoptions = _invApp.TransientObjects.CreateNameValueMap();
Links.Reverse();
foreach (Link oAsmComp in Links.Skip(1))
{
dynamic test = oAsmComp.ReferencedDocumentDescriptor.ReferencedDocument;
if (stptrans.HasSaveCopyAsOptions[test, stpcontext, stpoptions])
{
stpoptions.Value["ExportUnits"] = 6;
stpoptions.Value["Resolution"] = 2;
stpcontext.Type = IOMechanismEnum.kFileBrowseIOMechanism;
DataMedium stpdata = _invApp.TransientObjects.CreateDataMedium();
stpdata.FileName = outputfolder + "\\" + oAsmComp.Name + ".stl";
stptrans.SaveCopyAs(test, stpcontext, stpoptions, stpdata);
}
}
}
public override void ExecWithArguments(Document doc, NameValueMap map)
{
try
{
LogTrace("Processing " + doc.FullFileName);
using (new HeartBeat())
{
if (doc.DocumentType == DocumentTypeEnum.kPartDocumentObject ||
doc.DocumentType == DocumentTypeEnum.kAssemblyDocumentObject) // Assembly.
{
ApplicationAddIn objExportAddin = _inventorApplication
.ApplicationAddIns
.Cast <ApplicationAddIn>()
.FirstOrDefault(item => item.ClassIdString.Equals("{f539fb09-fc01-4260-a429-1818b14d6bac}", StringComparison.OrdinalIgnoreCase));
var translator = (TranslatorAddIn)objExportAddin;
if (translator != null)
{
Trace.TraceInformation("OBJ Export translator is available. Preparing options.");
TranslationContext context = _inventorApplication.TransientObjects.CreateTranslationContext();
context.Type = IOMechanismEnum.kFileBrowseIOMechanism;
// Set translation options
NameValueMap options = _inventorApplication.TransientObjects.CreateNameValueMap();
if (translator.get_HasSaveCopyAsOptions(doc, context, options))
{
options.set_Value("ExportFileStructure", 0); // one file
options.set_Value("RemoveInternalFacets", true);
options.set_Value("ExportUnits", 6); // meters... to match default Unity units
options.set_Value("Resolution", 2); // low
}
DataMedium data = _inventorApplication.TransientObjects.CreateDataMedium();
var outputDir = Path.Combine(Directory.GetCurrentDirectory(), "OBJ");
Directory.CreateDirectory(outputDir);
data.FileName = Path.Combine(outputDir, "result.obj");
translator.SaveCopyAs(doc, context, options, data);
LogTrace($"Export OBJ to '{data.FileName}'");
}
else
{
LogError("Cannot find OBJ Export translator");
}
}
else
{
LogError("Document type is not supported");
}
}
}
catch (Exception e)
{
LogError("Processing failed. " + e.ToString());
}
}
private void SaveAsSVF(Document Doc)
{
using (new HeartBeat())
{
LogTrace("** Saving SVF");
try
{
ApplicationAddIn svfAddin = _inventorApplication
.ApplicationAddIns
.Cast <ApplicationAddIn>()
.FirstOrDefault(item => item.ClassIdString == "{C200B99B-B7DD-4114-A5E9-6557AB5ED8EC}");
var oAddin = (TranslatorAddIn)svfAddin;
if (oAddin != null)
{
Trace.TraceInformation("SVF Translator addin is available");
TranslationContext oContext = _inventorApplication.TransientObjects.CreateTranslationContext();
// Setting context type
oContext.Type = IOMechanismEnum.kFileBrowseIOMechanism;
NameValueMap oOptions = _inventorApplication.TransientObjects.CreateNameValueMap();
// Create data medium;
DataMedium oData = _inventorApplication.TransientObjects.CreateDataMedium();
Trace.TraceInformation("SVF save");
var sessionDir = Path.Combine(Directory.GetCurrentDirectory(), "SvfOutput");
oData.FileName = Path.Combine(sessionDir, "result.collaboration");
var outputDir = Path.Combine(sessionDir, "output");
var bubbleFileOriginal = Path.Combine(outputDir, "bubble.json");
var bubbleFileNew = Path.Combine(sessionDir, "bubble.json");
// Setup SVF options
if (oAddin.get_HasSaveCopyAsOptions(Doc, oContext, oOptions))
{
oOptions.set_Value("GeometryType", 1);
oOptions.set_Value("EnableExpressTranslation", false);
oOptions.set_Value("SVFFileOutputDir", sessionDir);
oOptions.set_Value("ExportFileProperties", true);
oOptions.set_Value("ObfuscateLabels", false);
}
LogTrace($"SVF files are output to: {oOptions.get_Value("SVFFileOutputDir")}");
oAddin.SaveCopyAs(Doc, oContext, oOptions, oData);
Trace.TraceInformation("SVF can be exported.");
LogTrace($"** Saved SVF as {oData.FileName}");
File.Move(bubbleFileOriginal, bubbleFileNew);
}
}
catch (Exception e)
{
LogError($"********Export to format SVF failed: {e.Message}");
}
}
}
static PdfDocument InventorStitchDocuments(string toSavePath)
{
Process[] aInventor = Process.GetProcessesByName("Inventor");
if (aInventor.Length == 0)
{
Console.WriteLine("Inventor application is not currently running.");
return(null);
}
Application InvApp = (Application)Marshal.GetActiveObject("Inventor.Application");
TranslatorAddIn PDFAddin = InvApp.ApplicationAddIns.ItemById["{0AC6FD96-2F4D-42CE-8BE0-8AEA580399E4}"] as Inventor.TranslatorAddIn;
TranslationContext oContext = InvApp.TransientObjects.CreateTranslationContext();
oContext.Type = IOMechanismEnum.kFileBrowseIOMechanism;
NameValueMap oOptions = InvApp.TransientObjects.CreateNameValueMap();
DataMedium oDataMedium = InvApp.TransientObjects.CreateDataMedium();
int i = 0;
int j = 1;
int count = InvApp.Documents.VisibleDocuments.Count;
List <string> files = new List <string>();
foreach (var document in InvApp.Documents.VisibleDocuments)
{
if (PDFAddin.HasSaveCopyAsOptions[document, oContext, oOptions])
{
// Options for drawings...
oOptions.Value["All_Color_AS_Black"] = 1;
oOptions.Value["Remove_Line_Weights"] = 1;
oOptions.Value["Vector_Resolution"] = 400;
oOptions.Value["Sheet_Range"] = PrintRangeEnum.kPrintSheetRange;
oOptions.Value["Custom_Begin_Sheet"] = 2;
oOptions.Value["Custom_End_Sheet"] = 4;
}
files.Add(@toSavePath + "\\" + (i++).ToString() + ".pdf");
oDataMedium.FileName = files.Last();
PDFAddin.SaveCopyAs(document, oContext, oOptions, oDataMedium);
Console.Write("\rExporting Inventor PDFs {0} of {1}", j++, count);
}
Console.Write("\n");
PdfDocument pdfDocument = PdfStitchDocuments(@toSavePath, files.Select(s => s.Substring((s.LastIndexOf('\\')) + 1)).ToArray());
return(pdfDocument);
}
public string Translate(string substitutePathVal)
{
string strFilePath = substitutePathVal.Substring(4);
string strFileName = strFilePath.Substring(strFilePath.Length - int.Parse(substitutePathVal.Substring(0, 4), System.Globalization.NumberStyles.HexNumber));
strFileName = strFileName.Substring(0, strFileName.Length - 5);
System.Diagnostics.Debug.WriteLine(strFileName + "///" + strFilePath);
ApplicationAddIns oAddIns = _stAddIn.m_invApp.ApplicationAddIns;
TranslatorAddIn oTransAddIn = (TranslatorAddIn)oAddIns.ItemById[translatorID];
oTransAddIn.Activate();
TransientObjects transObj = _stAddIn.m_invApp.TransientObjects;
DataMedium file = transObj.CreateDataMedium();
file.FileName = strFilePath;
TranslationContext context = transObj.CreateTranslationContext();
context.Type = IOMechanismEnum.kFileBrowseIOMechanism;
NameValueMap options = transObj.CreateNameValueMap();
bool oHasOpt = oTransAddIn.HasOpenOptions[file, context, options];
oTransAddIn.Open(file, context, options, out object oDoc);
Document doc = (Document)oDoc;
_stAddIn.m_invApp.SilentOperation = true;
string savingDirectory = Properties.Settings.Default.projectFolder;
if (savingDirectory == "")
{
savingDirectory =
_stAddIn.m_invApp.DesignProjectManager
.ActiveDesignProject.WorkspacePath
+ "\\MCMASTER_REPOSITORY\\";
}
doc.SaveAs(savingDirectory + strFileName + ".ipt", false);
if (System.IO.File.Exists(strFilePath))
{
System.IO.File.Delete(strFilePath);
}
_stAddIn.m_invApp.SilentOperation = false;
doc.Close();
return(savingDirectory + strFileName + ".ipt");
}
private void SaveAsPdf(Document doc, string fileName)
{
string dirPath = Directory.GetCurrentDirectory();
TranslatorAddIn oPDF = null;
foreach (ApplicationAddIn item in inventorApplication.ApplicationAddIns)
{
if (item.ClassIdString == "{0AC6FD96-2F4D-42CE-8BE0-8AEA580399E4}")
{
Trace.TraceInformation("Found the PDF addin.");
oPDF = (TranslatorAddIn)item;
break;
}
else
{
}
}
if (oPDF != null)
{
TranslationContext oContext = inventorApplication.TransientObjects.CreateTranslationContext();
NameValueMap oPdfMap = inventorApplication.TransientObjects.CreateNameValueMap();
if (oPDF.get_HasSaveCopyAsOptions(doc, oContext, oPdfMap))
{
Trace.TraceInformation("PDF: can be exported.");
Trace.TraceInformation("PDF: Set context type");
oContext.Type = IOMechanismEnum.kFileBrowseIOMechanism;
Trace.TraceInformation("PDF: create data medium");
DataMedium oData = inventorApplication.TransientObjects.CreateDataMedium();
string pdfFileName = dirPath + "/" + fileName + ".pdf";
Trace.TraceInformation("PDF save to: " + pdfFileName);
oData.FileName = pdfFileName;
oPdfMap.set_Value("All_Color_AS_Black", 0);
oPDF.SaveCopyAs(doc, oContext, oPdfMap, oData);
Trace.TraceInformation("PDF exported.");
}
}
}
private static void importaFromAutocad(string v)
{
TranslatorAddIn oDWGTranslator = (TranslatorAddIn)iApp.ApplicationAddIns.ItemById["{C24E3AC2-122E-11D5-8E91-0010B541CD80}"];
DataMedium oDataMedium = iApp.TransientObjects.CreateDataMedium();
oDataMedium.FileName = @"X:\Commesse\Focchi\200000 40L\99 Service\Matrici full\" + v + "_def.dwg";
TranslationContext oTranslationContext = iApp.TransientObjects.CreateTranslationContext();
oTranslationContext.Type = Inventor.IOMechanismEnum.kFileBrowseIOMechanism;
PartDocument oDoc = (PartDocument)iApp.Documents.Add(DocumentTypeEnum.kPartDocumentObject);
PartComponentDefinition oPartCompDef = oDoc.ComponentDefinition;
PlanarSketch oSketchC = oPartCompDef.Sketches.Add(oPartCompDef.WorkPlanes[2], true);
oSketchC.Name = "testtttttt";
Sketch oSketch = (Sketch)oPartCompDef.Sketches["testtttttt"];
oSketch.Edit();
oTranslationContext.OpenIntoExisting = oSketch;
NameValueMap oOptions = iApp.TransientObjects.CreateNameValueMap();
oOptions.Add("SelectedLayers", "0");
oOptions.Add("InvertLayersSelection", false);
oOptions.Add("ConstrainEndPoints", true);
object boh;
oDWGTranslator.Open(oDataMedium, oTranslationContext, oOptions, out boh);
oSketch.ExitEdit();
// RegisterAutoCADDefault()
}
public void Open(DataMedium SourceData, TranslationContext Context, NameValueMap Options, ref object TargetObject)
{
InvAddIn.InventorSol S = new InvAddIn.InventorSol();
using (var reader = new Pdf3DReaderService())
{
List <Element3D> allElements = null;
List <string> Olist = new List <string>();
reader.ReadPdf3D(SourceData.FileName, out allElements);
S.Draw3D((Part)allElements[0], "test");
}
//// InvAddIn.InventorSol.Start(Pdf_File);
//InvAddIn.InventorSol S = new InvAddIn.InventorSol();
//S.Start(SourceData.FileName);
////InvAddIn.InventorSol.StandartTest();
}
///<summary>Initializes a new instance of <see cref="TranslatorData"/></summary>
internal TranslatorData(string addinGUID, string fullFileName, Document doc = null, Inventor.Application app = null)
{
if (app == null)
{
app = (Application)doc.Parent;
}
oAppAddIn = app.ApplicationAddIns.ItemById[addinGUID];
TransientObjects oTo = app.TransientObjects;
if (oAppAddIn is TranslatorAddIn)
{
oContext = oTo.CreateTranslationContext();
oContext.Type = IOMechanismEnum.kFileBrowseIOMechanism;
oDataMedium = oTo.CreateDataMedium();
oDataMedium.FileName = fullFileName;
}
oOptions = oTo.CreateNameValueMap();
}
//private void TriggerDrawingRules(Document doc)
//{
// Parameters parameters = ((DrawingDocument)doc).Parameters;
// try
// {
// dynamic trigger = parameters["iTrigger0"];
// // Just inccrement the trigger value, right now only supporting numeric triggers
// trigger.Value++;
// LogTrace("Fired trigger for drawing rules");
// }
// catch (Exception)
// {
// LogTrace("No drawing rules to trigger");
// }
// }
// Export Drawing file to PDF format
// In case that the Drawing has more sheets -> it will export PDF with pages
// Each PDF page represet one Drawing sheet
public void ExportIDWToPDF(Document doc, string exportFileName)
{
if (doc == null)
{
LogError("Document is null!");
return;
}
LogTrace("PDF file full path : " + exportFileName);
LogTrace("Create PDF Translator Addin");
TranslatorAddIn PDFAddIn = (TranslatorAddIn)inventorApplication.ApplicationAddIns.ItemById["{0AC6FD96-2F4D-42CE-8BE0-8AEA580399E4}"];
if (PDFAddIn == null)
{
LogError("Error: PDF Translator Addin is null!");
return;
}
TranslationContext context = inventorApplication.TransientObjects.CreateTranslationContext();
NameValueMap options = inventorApplication.TransientObjects.CreateNameValueMap();
if (PDFAddIn.HasSaveCopyAsOptions[doc, context, options])
{
context.Type = IOMechanismEnum.kFileBrowseIOMechanism;
DataMedium dataMedium = inventorApplication.TransientObjects.CreateDataMedium();
options.Value["Sheet_Range"] = PrintRangeEnum.kPrintAllSheets;
options.Value["Vector_Resolution"] = 300;
options.Value["All_Color_AS_Black"] = false;
options.Value["Sheets"] = GetSheetOptions(doc);
dataMedium.FileName = exportFileName;
LogTrace("Processing PDF export ...");
PDFAddIn.SaveCopyAs(doc, context, options, dataMedium);
LogTrace("Finish processing PDF export ...");
}
}
public bool GetTranslatorOpenOptions(string TranslatorClsId, ref NameValueMap options)
{
bool functionReturnValue = false;
TranslatorAddIn oTranslator = (TranslatorAddIn)mApp.ApplicationAddIns.ItemById[TranslatorClsId];
if (oTranslator == null)
{
functionReturnValue = false;
return(functionReturnValue);
}
oTranslator.Activate();
if ((oTranslator.AddInType != ApplicationAddInTypeEnum.kTranslationApplicationAddIn))
{
//Not a translator addin...
functionReturnValue = false;
return(functionReturnValue);
}
DataMedium Medium = mApp.TransientObjects.CreateDataMedium();
Medium.FileName = "C:\\Temp\\File.xxx";
Medium.MediumType = MediumTypeEnum.kFileNameMedium;
TranslationContext Context = mApp.TransientObjects.CreateTranslationContext();
options = mApp.TransientObjects.CreateNameValueMap();
try {
functionReturnValue = oTranslator.get_HasOpenOptions(Medium, Context, options);
} catch {
functionReturnValue = false;
}
return(functionReturnValue);
}
private string SaveForgeViewable(Document doc)
{
string viewableOutputDir = null;
//using (new HeartBeat())
{
LogTrace($"** Saving SVF");
try
{
TranslatorAddIn oAddin = null;
foreach (ApplicationAddIn item in inventorApplication.ApplicationAddIns)
{
if (item.ClassIdString == "{C200B99B-B7DD-4114-A5E9-6557AB5ED8EC}")
{
Trace.TraceInformation("SVF Translator addin is available");
oAddin = (TranslatorAddIn)item;
break;
}
else
{
}
}
if (oAddin != null)
{
Trace.TraceInformation("SVF Translator addin is available");
TranslationContext oContext = inventorApplication.TransientObjects.CreateTranslationContext();
// Setting context type
oContext.Type = IOMechanismEnum.kFileBrowseIOMechanism;
NameValueMap oOptions = inventorApplication.TransientObjects.CreateNameValueMap();
// Create data medium;
DataMedium oData = inventorApplication.TransientObjects.CreateDataMedium();
Trace.TraceInformation("SVF save");
var workingDir = Directory.GetCurrentDirectory(); //Path.GetDirectoryName(doc.FullFileName);
var sessionDir = Path.Combine(workingDir, "SvfOutput");
// Make sure we delete any old contents that may be in the output directory first,
// this is for local debugging. In DA4I the working directory is always clean
if (Directory.Exists(sessionDir))
{
Directory.Delete(sessionDir, true);
}
oData.FileName = Path.Combine(sessionDir, "result.collaboration");
var outputDir = Path.Combine(sessionDir, "output");
var bubbleFileOriginal = Path.Combine(outputDir, "bubble.json");
var bubbleFileNew = Path.Combine(sessionDir, "bubble.json");
// Setup SVF options
if (oAddin.get_HasSaveCopyAsOptions(doc, oContext, oOptions))
{
oOptions.set_Value("EnableExpressTranslation", false);
oOptions.set_Value("SVFFileOutputDir", sessionDir);
oOptions.set_Value("ExportFileProperties", true);
oOptions.set_Value("ObfuscateLabels", false);
}
LogTrace($"SVF files are oputput to: {oOptions.get_Value("SVFFileOutputDir")}");
oAddin.SaveCopyAs(doc, oContext, oOptions, oData);
Trace.TraceInformation("SVF can be exported.");
LogTrace($"Moving bubble file");
File.Move(bubbleFileOriginal, bubbleFileNew);
LogTrace($"Deleting result.collaboration");
File.Delete(oData.FileName);
viewableOutputDir = sessionDir;
LogTrace($"Finished SVF generation");
}
}
catch (Exception e)
{
LogError($"********Export to format SVF failed: {e.Message}");
return(null);
}
}
return(viewableOutputDir);
}
public bool get_HasOpenOptions(DataMedium SourceData, TranslationContext Context, NameValueMap DefaultOptions)
{
return(false);
}
public object GetThumbnail(DataMedium SourceData)
{
return(null);
}
public void SaveCopyAs(object SourceObject, TranslationContext Context, NameValueMap Options, DataMedium TargetData)
{
}
public void ShowOpenOptions(DataMedium SourceData, TranslationContext Context, NameValueMap ChosenOptions)
{
}
private void mCreateExport(IJobProcessorServices context, IJob job)
{
List <string> mExpFrmts = new List <string>();
List <string> mUploadFiles = new List <string>();
// read target export formats from settings file
Settings settings = Settings.Load();
#region validate execution rules
mTrace.IndentLevel += 1;
mTrace.WriteLine("Translator Job started...");
//pick up this job's context
Connection connection = context.Connection;
Autodesk.Connectivity.WebServicesTools.WebServiceManager mWsMgr = connection.WebServiceManager;
long mEntId = Convert.ToInt64(job.Params["EntityId"]);
string mEntClsId = job.Params["EntityClassId"];
// only run the job for files
if (mEntClsId != "FILE")
{
return;
}
// only run the job for ipt and iam file types,
List <string> mFileExtensions = new List <string> {
".ipt", ".iam"
};
ACW.File mFile = mWsMgr.DocumentService.GetFileById(mEntId);
if (!mFileExtensions.Any(n => mFile.Name.Contains(n)))
{
return;
}
// apply execution filters, e.g., exclude files of classification "substitute" etc.
List <string> mFileClassific = new List <string> {
"ConfigurationFactory", "DesignSubstitute"
}; //add "DesignDocumentation" for 3D Exporters only
if (mFileClassific.Any(n => mFile.FileClass.ToString().Contains(n)))
{
return;
}
// you may add addtional execution filters, e.g., category name == "Sheet Metal Part"
if (settings.ExportFomats == null)
{
throw new Exception("Settings expect to list at least one export format!");
}
if (settings.ExportFomats.Contains(","))
{
mExpFrmts = settings.ExportFomats.Split(',').ToList();
}
else
{
mExpFrmts.Add(settings.ExportFomats);
}
//remove SM formats, if source isn't sheet metal
if (mFile.Cat.CatName != settings.SmCatDispName)
{
if (mExpFrmts.Contains("SMDXF"))
{
mExpFrmts.Remove("SMDXF");
}
if (mExpFrmts.Contains("SMSAT"))
{
mExpFrmts.Remove("SMSAT");
}
}
mTrace.WriteLine("Job execution rules validated.");
#endregion validate execution rules
#region VaultInventorServer IPJ activation
//establish InventorServer environment including translator addins; differentiate her in case full Inventor.exe is used
Inventor.InventorServer mInv = context.InventorObject as InventorServer;
ApplicationAddIns mInvSrvAddIns = mInv.ApplicationAddIns;
//override InventorServer default project settings by your Vault specific ones
Inventor.DesignProjectManager projectManager;
Inventor.DesignProject mSaveProject, mProject;
String mIpjPath = "";
String mWfPath = "";
String mIpjLocalPath = "";
ACW.File mProjFile;
VDF.Vault.Currency.Entities.FileIteration mIpjFileIter = null;
//download and activate the Inventor Project file in VaultInventorServer
mTrace.IndentLevel += 1;
mTrace.WriteLine("Job tries activating Inventor project file as enforced in Vault behavior configurations.");
try
{
//Download enforced ipj file
if (mWsMgr.DocumentService.GetEnforceWorkingFolder() && mWsMgr.DocumentService.GetEnforceInventorProjectFile())
{
mIpjPath = mWsMgr.DocumentService.GetInventorProjectFileLocation();
mWfPath = mWsMgr.DocumentService.GetRequiredWorkingFolderLocation();
}
else
{
throw new Exception("Job requires both settings enabled: 'Enforce Workingfolder' and 'Enforce Inventor Project'.");
}
String[] mIpjFullFileName = mIpjPath.Split(new string[] { "/" }, StringSplitOptions.None);
String mIpjFileName = mIpjFullFileName.LastOrDefault();
//get the projects file object for download
ACW.PropDef[] filePropDefs = mWsMgr.PropertyService.GetPropertyDefinitionsByEntityClassId("FILE");
ACW.PropDef mNamePropDef = filePropDefs.Single(n => n.SysName == "ClientFileName");
ACW.SrchCond mSrchCond = new ACW.SrchCond()
{
PropDefId = mNamePropDef.Id,
PropTyp = ACW.PropertySearchType.SingleProperty,
SrchOper = 3, // is equal
SrchRule = ACW.SearchRuleType.Must,
SrchTxt = mIpjFileName
};
string bookmark = string.Empty;
ACW.SrchStatus status = null;
List <ACW.File> totalResults = new List <ACW.File>();
while (status == null || totalResults.Count < status.TotalHits)
{
ACW.File[] results = mWsMgr.DocumentService.FindFilesBySearchConditions(new ACW.SrchCond[] { mSrchCond },
null, null, false, true, ref bookmark, out status);
if (results != null)
{
totalResults.AddRange(results);
}
else
{
break;
}
}
if (totalResults.Count == 1)
{
mProjFile = totalResults[0];
}
else
{
throw new Exception("Job execution stopped due to ambigous project file definitions; single project file per Vault expected");
}
//define download settings for the project file
VDF.Vault.Settings.AcquireFilesSettings mDownloadSettings = new VDF.Vault.Settings.AcquireFilesSettings(connection);
mDownloadSettings.LocalPath = new VDF.Currency.FolderPathAbsolute(mWfPath);
mIpjFileIter = new VDF.Vault.Currency.Entities.FileIteration(connection, mProjFile);
mDownloadSettings.AddFileToAcquire(mIpjFileIter, VDF.Vault.Settings.AcquireFilesSettings.AcquisitionOption.Download);
//download project file and get local path
VDF.Vault.Results.AcquireFilesResults mDownLoadResult;
VDF.Vault.Results.FileAcquisitionResult fileAcquisitionResult;
mDownLoadResult = connection.FileManager.AcquireFiles(mDownloadSettings);
fileAcquisitionResult = mDownLoadResult.FileResults.FirstOrDefault();
mIpjLocalPath = fileAcquisitionResult.LocalPath.FullPath;
//activate this Vault's ipj temporarily
projectManager = mInv.DesignProjectManager;
mSaveProject = projectManager.ActiveDesignProject;
mProject = projectManager.DesignProjects.AddExisting(mIpjLocalPath);
mProject.Activate();
//[Optionally:] get Inventor Design Data settings and download all related files ---------
mTrace.WriteLine("Job successfully activated Inventor IPJ.");
}
catch (Exception ex)
{
throw new Exception("Job was not able to activate Inventor project file. - Note: The ipj must not be checked out by another user.", ex.InnerException);
}
#endregion VaultInventorServer IPJ activation
#region download source file(s)
mTrace.IndentLevel += 1;
mTrace.WriteLine("Job downloads source file(s) for translation.");
//download the source file iteration, enforcing overwrite if local files exist
VDF.Vault.Settings.AcquireFilesSettings mDownloadSettings2 = new VDF.Vault.Settings.AcquireFilesSettings(connection);
VDF.Vault.Currency.Entities.FileIteration mFileIteration = new VDF.Vault.Currency.Entities.FileIteration(connection, mFile);
mDownloadSettings2.AddFileToAcquire(mFileIteration, VDF.Vault.Settings.AcquireFilesSettings.AcquisitionOption.Download);
mDownloadSettings2.OrganizeFilesRelativeToCommonVaultRoot = true;
mDownloadSettings2.OptionsRelationshipGathering.FileRelationshipSettings.IncludeChildren = true;
mDownloadSettings2.OptionsRelationshipGathering.FileRelationshipSettings.IncludeLibraryContents = true;
mDownloadSettings2.OptionsRelationshipGathering.FileRelationshipSettings.ReleaseBiased = true;
VDF.Vault.Settings.AcquireFilesSettings.AcquireFileResolutionOptions mResOpt = new VDF.Vault.Settings.AcquireFilesSettings.AcquireFileResolutionOptions();
mResOpt.OverwriteOption = VDF.Vault.Settings.AcquireFilesSettings.AcquireFileResolutionOptions.OverwriteOptions.ForceOverwriteAll;
mResOpt.SyncWithRemoteSiteSetting = VDF.Vault.Settings.AcquireFilesSettings.SyncWithRemoteSite.Always;
//execute download
VDF.Vault.Results.AcquireFilesResults mDownLoadResult2 = connection.FileManager.AcquireFiles(mDownloadSettings2);
//pickup result details
VDF.Vault.Results.FileAcquisitionResult fileAcquisitionResult2 = mDownLoadResult2.FileResults.Where(n => n.File.EntityName == mFileIteration.EntityName).FirstOrDefault();
if (fileAcquisitionResult2 == null)
{
mSaveProject.Activate();
throw new Exception("Job stopped execution as the source file to translate did not download");
}
string mDocPath = fileAcquisitionResult2.LocalPath.FullPath;
string mExt = System.IO.Path.GetExtension(mDocPath); //mDocPath.Split('.').Last();
mTrace.WriteLine("Job successfully downloaded source file(s) for translation.");
#endregion download source file(s)
#region VaultInventorServer CAD Export
mTrace.WriteLine("Job opens source file.");
Document mDoc = null;
mDoc = mInv.Documents.Open(mDocPath);
foreach (string item in mExpFrmts)
{
switch (item)
{
case ("STP"):
//activate STEP Translator environment,
try
{
TranslatorAddIn mStepTrans = mInvSrvAddIns.ItemById["{90AF7F40-0C01-11D5-8E83-0010B541CD80}"] as TranslatorAddIn;
if (mStepTrans == null)
{
//switch temporarily used project file back to original one
mSaveProject.Activate();
throw new Exception("Job stopped execution, because indicated translator addin is not available.");
}
TranslationContext mTransContext = mInv.TransientObjects.CreateTranslationContext();
NameValueMap mTransOptions = mInv.TransientObjects.CreateNameValueMap();
if (mStepTrans.HasSaveCopyAsOptions[mDoc, mTransContext, mTransOptions] == true)
{
//open, and translate the source file
mTrace.IndentLevel += 1;
mTrace.WriteLine("Job opens source file.");
mTransOptions.Value["ApplicationProtocolType"] = 3; //AP 2014, Automotive Design
mTransOptions.Value["Description"] = "Sample-Job Step Translator using VaultInventorServer";
mTransContext.Type = IOMechanismEnum.kFileBrowseIOMechanism;
//delete local file if exists, as the export wouldn't overwrite
if (System.IO.File.Exists(mDocPath.Replace(mExt, ".stp")))
{
System.IO.File.SetAttributes(mDocPath.Replace(mExt, ".stp"), System.IO.FileAttributes.Normal);
System.IO.File.Delete(mDocPath.Replace(mExt, ".stp"));
}
;
DataMedium mData = mInv.TransientObjects.CreateDataMedium();
mData.FileName = mDocPath.Replace(mExt, ".stp");
mStepTrans.SaveCopyAs(mDoc, mTransContext, mTransOptions, mData);
//collect all export files for later upload
mUploadFiles.Add(mDocPath.Replace(mExt, ".stp"));
mTrace.WriteLine("STEP Translator created file: " + mUploadFiles.LastOrDefault());
mTrace.IndentLevel -= 1;
}
}
catch (Exception ex)
{
mTrace.WriteLine("STEP Export Failed: " + ex.Message);
}
break;
case "JT":
//activate JT Translator environment,
try
{
TranslatorAddIn mJtTrans = mInvSrvAddIns.ItemById["{16625A0E-F58C-4488-A969-E7EC4F99CACD}"] as TranslatorAddIn;
if (mJtTrans == null)
{
//switch temporarily used project file back to original one
mTrace.WriteLine("JT Translator not found.");
break;
}
TranslationContext mTransContext = mInv.TransientObjects.CreateTranslationContext();
NameValueMap mTransOptions = mInv.TransientObjects.CreateNameValueMap();
if (mJtTrans.HasSaveCopyAsOptions[mDoc, mTransContext, mTransOptions] == true)
{
//open, and translate the source file
mTrace.IndentLevel += 1;
mTransOptions.Value["Version"] = 102; //default
mTransContext.Type = IOMechanismEnum.kFileBrowseIOMechanism;
//delete local file if exists, as the export wouldn't overwrite
if (System.IO.File.Exists(mDocPath.Replace(mExt, ".jt")))
{
System.IO.File.SetAttributes(mDocPath.Replace(mExt, ".jt"), System.IO.FileAttributes.Normal);
System.IO.File.Delete(mDocPath.Replace(mExt, ".jt"));
}
;
DataMedium mData = mInv.TransientObjects.CreateDataMedium();
mData.FileName = mDocPath.Replace(mExt, ".jt");
mJtTrans.SaveCopyAs(mDoc, mTransContext, mTransOptions, mData);
//collect all export files for later upload
mUploadFiles.Add(mDocPath.Replace(mExt, ".jt"));
mTrace.WriteLine("JT Translator created file: " + mUploadFiles.LastOrDefault());
mTrace.IndentLevel -= 1;
}
}
catch (Exception ex)
{
mTrace.WriteLine("JT Export Failed: " + ex.Message);
}
break;
case "SMDXF":
try
{
TranslatorAddIn mDXFTrans = mInvSrvAddIns.ItemById["{C24E3AC4-122E-11D5-8E91-0010B541CD80}"] as TranslatorAddIn;
mDXFTrans.Activate();
if (mDXFTrans == null)
{
mTrace.WriteLine("DXF Translator not found.");
break;
}
if (System.IO.File.Exists(mDocPath.Replace(mExt, ".dxf")))
{
System.IO.FileInfo fileInfo = new FileInfo(mDocPath.Replace(mExt, ".dxf"));
fileInfo.IsReadOnly = false;
fileInfo.Delete();
}
PartDocument mPartDoc = (PartDocument)mDoc;
DataIO mDataIO = mPartDoc.ComponentDefinition.DataIO;
String mOut = "FLAT PATTERN DXF?AcadVersion=R12&OuterProfileLayer=Outer";
mDataIO.WriteDataToFile(mOut, mDocPath.Replace(mExt, ".dxf"));
//collect all export files for later upload
mUploadFiles.Add(mDocPath.Replace(mExt, ".dxf"));
mTrace.WriteLine("SheetMetal DXF Translator created file: " + mUploadFiles.LastOrDefault());
mTrace.IndentLevel -= 1;
}
catch (Exception ex)
{
mTrace.WriteLine("SMDXF Export Failed: " + ex.Message);
}
break;
default:
break;
}
}
mDoc.Close(true);
mTrace.WriteLine("Source file closed");
//switch temporarily used project file back to original one
mSaveProject.Activate();
mTrace.WriteLine("Job exported file(s); continues uploading.");
mTrace.IndentLevel -= 1;
#endregion VaultInventorServer CAD Export
#region Vault File Management
foreach (string file in mUploadFiles)
{
ACW.File mExpFile = null;
System.IO.FileInfo mExportFileInfo = new System.IO.FileInfo(file);
if (mExportFileInfo.Exists)
{
//copy file to output location
if (settings.OutPutPath != "")
{
System.IO.FileInfo fileInfo = new FileInfo(settings.OutPutPath + "\\" + mExportFileInfo.Name);
if (fileInfo.Exists)
{
fileInfo.IsReadOnly = false;
fileInfo.Delete();
}
System.IO.File.Copy(mExportFileInfo.FullName, settings.OutPutPath + "\\" + mExportFileInfo.Name, true);
}
//add resulting export file to Vault if it doesn't exist, otherwise update the existing one
ACW.Folder mFolder = mWsMgr.DocumentService.FindFoldersByIds(new long[] { mFile.FolderId }).FirstOrDefault();
string vaultFilePath = System.IO.Path.Combine(mFolder.FullName, mExportFileInfo.Name).Replace("\\", "/");
ACW.File wsFile = mWsMgr.DocumentService.FindLatestFilesByPaths(new string[] { vaultFilePath }).First();
VDF.Currency.FilePathAbsolute vdfPath = new VDF.Currency.FilePathAbsolute(mExportFileInfo.FullName);
VDF.Vault.Currency.Entities.FileIteration vdfFile = null;
VDF.Vault.Currency.Entities.FileIteration addedFile = null;
VDF.Vault.Currency.Entities.FileIteration mUploadedFile = null;
if (wsFile == null || wsFile.Id < 0)
{
// add new file to Vault
mTrace.WriteLine("Job adds " + mExportFileInfo.Name + " as new file.");
if (mFolder == null || mFolder.Id == -1)
{
throw new Exception("Vault folder " + mFolder.FullName + " not found");
}
var folderEntity = new Autodesk.DataManagement.Client.Framework.Vault.Currency.Entities.Folder(connection, mFolder);
try
{
addedFile = connection.FileManager.AddFile(folderEntity, "Created by Job Processor", null, null, ACW.FileClassification.DesignRepresentation, false, vdfPath);
mExpFile = addedFile;
}
catch (Exception ex)
{
throw new Exception("Job could not add export file " + vdfPath + "Exception: ", ex);
}
}
else
{
// checkin new file version
mTrace.WriteLine("Job uploads " + mExportFileInfo.Name + " as new file version.");
VDF.Vault.Settings.AcquireFilesSettings aqSettings = new VDF.Vault.Settings.AcquireFilesSettings(connection)
{
DefaultAcquisitionOption = VDF.Vault.Settings.AcquireFilesSettings.AcquisitionOption.Checkout
};
vdfFile = new VDF.Vault.Currency.Entities.FileIteration(connection, wsFile);
aqSettings.AddEntityToAcquire(vdfFile);
var results = connection.FileManager.AcquireFiles(aqSettings);
try
{
mUploadedFile = connection.FileManager.CheckinFile(results.FileResults.First().File, "Created by Job Processor", false, null, null, false, null, ACW.FileClassification.DesignRepresentation, false, vdfPath);
mExpFile = mUploadedFile;
}
catch (Exception ex)
{
throw new Exception("Job could not update existing export file " + vdfFile + "Exception: ", ex);
}
}
}
else
{
throw new Exception("Job could not find the export result file: " + mDocPath.Replace(mExt, ".stp"));
}
mTrace.IndentLevel += 1;
//update the new file's revision
try
{
mTrace.WriteLine("Job tries synchronizing " + mExpFile.Name + "'s revision in Vault.");
mWsMgr.DocumentServiceExtensions.UpdateFileRevisionNumbers(new long[] { mExpFile.Id }, new string[] { mFile.FileRev.Label }, "Rev Index synchronized by Job Processor");
}
catch (Exception)
{
//the job will not stop execution in this sample, if revision labels don't synchronize
}
//synchronize source file properties to export file properties for UDPs assigned to both
try
{
mTrace.WriteLine(mExpFile.Name + ": Job tries synchronizing properties in Vault.");
//get the design rep category's user properties
ACET.IExplorerUtil mExplUtil = Autodesk.Connectivity.Explorer.ExtensibilityTools.ExplorerLoader.LoadExplorerUtil(
connection.Server, connection.Vault, connection.UserID, connection.Ticket);
Dictionary <ACW.PropDef, object> mPropDictonary = new Dictionary <ACW.PropDef, object>();
//get property definitions filtered to UDPs
VDF.Vault.Currency.Properties.PropertyDefinitionDictionary mPropDefDic = connection.PropertyManager.GetPropertyDefinitions(
VDF.Vault.Currency.Entities.EntityClassIds.Files, null, VDF.Vault.Currency.Properties.PropertyDefinitionFilter.IncludeUserDefined);
VDF.Vault.Currency.Properties.PropertyDefinition mPropDef = new PropertyDefinition();
ACW.PropInst[] mSourcePropInsts = mWsMgr.PropertyService.GetProperties("FILE", new long[] { mFile.Id }, new long[] { mPropDef.Id });
//get property definitions assigned to Design Representation category
ACW.CatCfg catCfg1 = mWsMgr.CategoryService.GetCategoryConfigurationById(mExpFile.Cat.CatId, new string[] { "UserDefinedProperty" });
List <long> mFilePropDefs = new List <long>();
foreach (ACW.Bhv bhv in catCfg1.BhvCfgArray.First().BhvArray)
{
mFilePropDefs.Add(bhv.Id);
}
//get properties assigned to source file and add definition/value pair to dictionary
mSourcePropInsts = mWsMgr.PropertyService.GetProperties("FILE", new long[] { mFile.Id }, mFilePropDefs.ToArray());
ACW.PropDef[] propDefs = connection.WebServiceManager.PropertyService.GetPropertyDefinitionsByEntityClassId("FILE");
foreach (ACW.PropInst item in mSourcePropInsts)
{
mPropDef = connection.PropertyManager.GetPropertyDefinitionById(item.PropDefId);
ACW.PropDef propDef = propDefs.SingleOrDefault(n => n.Id == item.PropDefId);
mPropDictonary.Add(propDef, item.Val);
}
//update export file using the property dictionary; note this the IExplorerUtil method bumps file iteration and requires no check out
mExplUtil.UpdateFileProperties(mExpFile, mPropDictonary);
}
catch (Exception ex)
{
mTrace.WriteLine("Job failed copying properties from source file " + mFile.Name + " to export file: " + mExpFile.Name + " . Exception details: " + ex);
//you may uncomment the action below if the job should abort executing due to failures copying property values
//throw new Exception("Job failed copying properties from source file " + mFile.Name + " to export file: " + mExpFile.Name + " . Exception details: " + ex.ToString() + " ");
}
//align lifecycle states of export to source file's state name
try
{
mTrace.WriteLine(mExpFile.Name + ": Job tries synchronizing lifecycle state in Vault.");
Dictionary <string, long> mTargetStateNames = new Dictionary <string, long>();
ACW.LfCycDef mTargetLfcDef = (mWsMgr.LifeCycleService.GetLifeCycleDefinitionsByIds(new long[] { mExpFile.FileLfCyc.LfCycDefId })).FirstOrDefault();
foreach (var item in mTargetLfcDef.StateArray)
{
mTargetStateNames.Add(item.DispName, item.Id);
}
mTargetStateNames.TryGetValue(mFile.FileLfCyc.LfCycStateName, out long mTargetLfcStateId);
mWsMgr.DocumentServiceExtensions.UpdateFileLifeCycleStates(new long[] { mExpFile.MasterId }, new long[] { mTargetLfcStateId }, "Lifecycle state synchronized by Job Processor");
}
catch (Exception)
{ }
//attach export file to source file leveraging design representation attachment type
try
{
mTrace.WriteLine(mExpFile.Name + ": Job tries to attach to its source in Vault.");
ACW.FileAssocParam mAssocParam = new ACW.FileAssocParam();
mAssocParam.CldFileId = mExpFile.Id;
mAssocParam.ExpectedVaultPath = mWsMgr.DocumentService.FindFoldersByIds(new long[] { mFile.FolderId }).First().FullName;
mAssocParam.RefId = null;
mAssocParam.Source = null;
mAssocParam.Typ = ACW.AssociationType.Attachment;
mWsMgr.DocumentService.AddDesignRepresentationFileAttachment(mFile.Id, mAssocParam);
}
catch (Exception)
{ }
mTrace.IndentLevel -= 1;
}
#endregion Vault File Management
mTrace.IndentLevel = 1;
mTrace.WriteLine("Job finished all steps.");
mTrace.Flush();
mTrace.Close();
}
public void RunWithArguments(Document doc, NameValueMap map)
{
StringBuilder traceInfo = new StringBuilder("RunWithArguments called with ");
traceInfo.Append(doc.DisplayName);
Trace.TraceInformation(map.Count.ToString());
// values in map are keyed on _1, _2, etc
for (int i = 0; i < map.Count; i++)
{
traceInfo.Append(" and ");
traceInfo.Append(map.Value["_" + (i + 1)]);
}
Trace.TraceInformation(traceInfo.ToString());
string dirPath = System.IO.Path.GetDirectoryName(doc.FullDocumentName);
#region ExportSAT file
Trace.TraceInformation("Export SAT file.");
TranslatorAddIn oSAT = null;
foreach (ApplicationAddIn item in m_inventorServer.ApplicationAddIns)
{
if (item.ClassIdString == "{89162634-02B6-11D5-8E80-0010B541CD80}")
{
Trace.TraceInformation("Finded the PDF addin.");
oSAT = (TranslatorAddIn)item;
break;
}
else
{
}
}
if (oSAT != null)
{
TranslationContext oContext = m_inventorServer.TransientObjects.CreateTranslationContext();
NameValueMap oIgesMap = m_inventorServer.TransientObjects.CreateNameValueMap();
if (oSAT.get_HasSaveCopyAsOptions(doc, oContext, oIgesMap))
{
Trace.TraceInformation("SAT can be exported.");
Trace.TraceInformation("SAT: Set context type");
oContext.Type = IOMechanismEnum.kFileBrowseIOMechanism;
Trace.TraceInformation("SAT: create data medium");
DataMedium oData = m_inventorServer.TransientObjects.CreateDataMedium();
Trace.TraceInformation("SAT save to: " + dirPath + "\\export.sat");
oData.FileName = dirPath + "\\export.sat";
oIgesMap.set_Value("GeometryType", 1);
oSAT.SaveCopyAs(doc, oContext, oIgesMap, oData);
Trace.TraceInformation("SAT exported.");
}
#endregion
}
}