public static Polygon CreateBezierCircle(double radius = 1, MapPoint center = null)
{
// Approximate a full circle with Bezier curves. (We could use
// EllipticArc segments, of course, but in the context of markers,
// Béziers are more appropriate.) It is customary to use four cubic
// Bézier curves, one for each quadrant. The control points must be
// on tangential lines to ensure continuity, their distance from
// the axes is chosen for minimal deviation from a true circle.
// See: https://spencermortensen.com/articles/bezier-circle/
const double magic = 0.551915; // for best circle approximation
double cx = 0, cy = 0;
if (center != null)
{
cx = center.X;
cy = center.Y;
}
var p0 = new Coordinate2D(radius, 0).Shifted(cx, cy);
var p01 = new Coordinate2D(radius, magic * radius).Shifted(cx, cy);
var p10 = new Coordinate2D(magic * radius, radius).Shifted(cx, cy);
var p1 = new Coordinate2D(0, radius).Shifted(cx, cy);
var p12 = new Coordinate2D(-magic * radius, radius).Shifted(cx, cy);
var p21 = new Coordinate2D(-radius, magic * radius).Shifted(cx, cy);
var p2 = new Coordinate2D(-radius, 0).Shifted(cx, cy);
var p23 = new Coordinate2D(-radius, -magic * radius).Shifted(cx, cy);
var p32 = new Coordinate2D(-magic * radius, -radius).Shifted(cx, cy);
var p3 = new Coordinate2D(0, -radius).Shifted(cx, cy);
var p30 = new Coordinate2D(magic * radius, -radius).Shifted(cx, cy);
var p03 = new Coordinate2D(radius, -magic * radius).Shifted(cx, cy);
// segments for each quadrant
var q1 = CubicBezierBuilder.CreateCubicBezierSegment(p0, p01, p10, p1);
var q2 = CubicBezierBuilder.CreateCubicBezierSegment(p1, p12, p21, p2);
var q3 = CubicBezierBuilder.CreateCubicBezierSegment(p2, p23, p32, p3);
var q4 = CubicBezierBuilder.CreateCubicBezierSegment(p3, p30, p03, p0);
var segments = new[] { q1, q2, q3, q4 };
return(PolygonBuilder.CreatePolygon(segments));
}
// Note: very different from ArcObjects-based ControlPointUtils (immutable geoms)
public static Segment SetPointID(Segment template, int?startPointID, int?endPointID)
{
if (!startPointID.HasValue && !endPointID.HasValue)
{
return(template); // nothing to update
}
switch (template)
{
case LineSegment lineSegment:
using (var builder = new LineBuilder(lineSegment))
{
builder.StartPoint = SetPointID(builder.StartPoint, startPointID);
builder.EndPoint = SetPointID(builder.EndPoint, endPointID);
return(builder.ToSegment());
}
case EllipticArcSegment ellipticSegment:
using (var builder = new EllipticArcBuilder(ellipticSegment))
{
builder.StartPoint = SetPointID(builder.StartPoint, startPointID);
builder.EndPoint = SetPointID(builder.EndPoint, endPointID);
return(builder.ToSegment());
}
case CubicBezierSegment bezierSegment:
using (var builder = new CubicBezierBuilder(bezierSegment))
{
builder.StartPoint = SetPointID(builder.StartPoint, startPointID);
builder.EndPoint = SetPointID(builder.EndPoint, endPointID);
return(builder.ToSegment());
}
default:
throw new ArgumentException(@"Unknown segment type", nameof(template));
}
}
async public static void CreateElementSnippets()
{
//There are already many Create element snippets in the PRO snippets section. This section will only contain examples that are NOT in the Pro snippets section
//Pro snippets region names includes:
// Create point graphic with symbology
// Create line graphic with symbology
// Create rectangle graphic with simple symbology
// Create text element with basic font properties
// Create rectangle text with more advanced symbol settings
// Create a new picture element with advanced symbol settings
// Create a map frame and zoom to a bookmark
// Create a legend for a specifc map frame
// Creating group elements
LayoutView lytView = LayoutView.Active;
Layout layout = lytView.Layout;
#region Create_BeizierCurve
await QueuedTask.Run(() =>
{
//Build geometry
Coordinate2D pt1 = new Coordinate2D(1, 7.5);
Coordinate2D pt2 = new Coordinate2D(1.66, 8);
Coordinate2D pt3 = new Coordinate2D(2.33, 7.1);
Coordinate2D pt4 = new Coordinate2D(3, 7.5);
CubicBezierBuilder bez = new CubicBezierBuilder(pt1, pt2, pt3, pt4);
CubicBezierSegment bezSeg = bez.ToSegment();
Polyline bezPl = PolylineBuilder.CreatePolyline(bezSeg);
//Set symbology, create and add element to layout
CIMLineSymbol lineSym = SymbolFactory.Instance.ConstructLineSymbol(ColorFactory.Instance.RedRGB, 4.0, SimpleLineStyle.DashDot);
GraphicElement bezElm = LayoutElementFactory.Instance.CreateLineGraphicElement(layout, bezPl, lineSym);
bezElm.SetName("New Bezier Curve");
});
#endregion Create_BeizierCurve
#region Create_freehand
await QueuedTask.Run(() =>
{
//Build geometry
List <Coordinate2D> plCoords = new List <Coordinate2D>();
plCoords.Add(new Coordinate2D(1.5, 10.5));
plCoords.Add(new Coordinate2D(1.25, 9.5));
plCoords.Add(new Coordinate2D(1, 10.5));
plCoords.Add(new Coordinate2D(0.75, 9.5));
plCoords.Add(new Coordinate2D(0.5, 10.5));
plCoords.Add(new Coordinate2D(0.5, 1));
plCoords.Add(new Coordinate2D(0.75, 2));
plCoords.Add(new Coordinate2D(1, 1));
Polyline linePl = PolylineBuilder.CreatePolyline(plCoords);
//Set symbolology, create and add element to layout
CIMLineSymbol lineSym = SymbolFactory.Instance.ConstructLineSymbol(ColorFactory.Instance.BlackRGB, 2.0, SimpleLineStyle.Solid);
GraphicElement lineElm = LayoutElementFactory.Instance.CreateLineGraphicElement(layout, linePl, lineSym);
lineElm.SetName("New Freehand");
});
#endregion Create_freehand
#region Create_polygon
await QueuedTask.Run(() =>
{
//Build geometry
List <Coordinate2D> plyCoords = new List <Coordinate2D>();
plyCoords.Add(new Coordinate2D(1, 7));
plyCoords.Add(new Coordinate2D(2, 7));
plyCoords.Add(new Coordinate2D(2, 6.7));
plyCoords.Add(new Coordinate2D(3, 6.7));
plyCoords.Add(new Coordinate2D(3, 6.1));
plyCoords.Add(new Coordinate2D(1, 6.1));
Polygon poly = PolygonBuilder.CreatePolygon(plyCoords);
//Set symbolology, create and add element to layout
CIMStroke outline = SymbolFactory.Instance.ConstructStroke(ColorFactory.Instance.BlueRGB, 2.0, SimpleLineStyle.DashDotDot);
CIMPolygonSymbol polySym = SymbolFactory.Instance.ConstructPolygonSymbol(ColorFactory.Instance.RedRGB, SimpleFillStyle.ForwardDiagonal, outline);
GraphicElement polyElm = LayoutElementFactory.Instance.CreatePolygonGraphicElement(layout, poly, polySym);
polyElm.SetName("New Polygon");
});
#endregion Create_polygon
#region Create_circle
await QueuedTask.Run(() =>
{
//Build geometry
Coordinate2D center = new Coordinate2D(2, 4);
EllipticArcBuilder eabCir = new EllipticArcBuilder(center, 0.5, esriArcOrientation.esriArcClockwise);
EllipticArcSegment cir = eabCir.ToSegment();
//Set symbolology, create and add element to layout
CIMStroke outline = SymbolFactory.Instance.ConstructStroke(ColorFactory.Instance.BlackRGB, 2.0, SimpleLineStyle.Dash);
CIMPolygonSymbol circleSym = SymbolFactory.Instance.ConstructPolygonSymbol(ColorFactory.Instance.RedRGB, SimpleFillStyle.Solid, outline);
GraphicElement cirElm = LayoutElementFactory.Instance.CreateCircleGraphicElement(layout, cir, circleSym);
cirElm.SetName("New Circle");
});
#endregion Create_circle
#region Create_ellipse
await QueuedTask.Run(() =>
{
//Build geometry
Coordinate2D center = new Coordinate2D(2, 2.75);
EllipticArcBuilder eabElp = new EllipticArcBuilder(center, 0, 1, 0.45, esriArcOrientation.esriArcClockwise);
EllipticArcSegment ellipse = eabElp.ToSegment();
//Set symbolology, create and add element to layout
CIMStroke outline = SymbolFactory.Instance.ConstructStroke(ColorFactory.Instance.GreenRGB, 2.0, SimpleLineStyle.Dot);
CIMPolygonSymbol ellipseSym = SymbolFactory.Instance.ConstructPolygonSymbol(ColorFactory.Instance.GreyRGB, SimpleFillStyle.Vertical, outline);
GraphicElement elpElm = LayoutElementFactory.Instance.CreateEllipseGraphicElement(layout, ellipse, ellipseSym);
elpElm.SetName("New Ellipse");
});
#endregion Create_ellipse
#region Create_lasso
await QueuedTask.Run(() =>
{
//Build geometry
List <Coordinate2D> plyCoords = new List <Coordinate2D>();
plyCoords.Add(new Coordinate2D(1, 1));
plyCoords.Add(new Coordinate2D(1.25, 2));
plyCoords.Add(new Coordinate2D(1.5, 1.1));
plyCoords.Add(new Coordinate2D(1.75, 2));
plyCoords.Add(new Coordinate2D(2, 1.1));
plyCoords.Add(new Coordinate2D(2.25, 2));
plyCoords.Add(new Coordinate2D(2.5, 1.1));
plyCoords.Add(new Coordinate2D(2.75, 2));
plyCoords.Add(new Coordinate2D(3, 1));
Polygon poly = PolygonBuilder.CreatePolygon(plyCoords);
//Set symbolology, create and add element to layout
CIMStroke outline = SymbolFactory.Instance.ConstructStroke(ColorFactory.Instance.BlackRGB, 2.0, SimpleLineStyle.Solid);
CIMPolygonSymbol polySym = SymbolFactory.Instance.ConstructPolygonSymbol(ColorFactory.Instance.RedRGB, SimpleFillStyle.ForwardDiagonal, outline);
GraphicElement polyElm = LayoutElementFactory.Instance.CreatePolygonGraphicElement(layout, poly, polySym);
polyElm.SetName("New Lasso");
});
#endregion Create_lasso
#region Create_CurveText
await QueuedTask.Run(() =>
{
//Build geometry
Coordinate2D pt1 = new Coordinate2D(3.6, 7.5);
Coordinate2D pt2 = new Coordinate2D(4.26, 8);
Coordinate2D pt3 = new Coordinate2D(4.93, 7.1);
Coordinate2D pt4 = new Coordinate2D(5.6, 7.5);
CubicBezierBuilder bez = new CubicBezierBuilder(pt1, pt2, pt3, pt4);
CubicBezierSegment bezSeg = bez.ToSegment();
Polyline bezPl = PolylineBuilder.CreatePolyline(bezSeg);
//Set symbolology, create and add element to layout
CIMTextSymbol sym = SymbolFactory.Instance.ConstructTextSymbol(ColorFactory.Instance.BlackRGB, 24, "Comic Sans MS", "Regular");
GraphicElement bezTxtElm = LayoutElementFactory.Instance.CreateCurvedTextGraphicElement(layout, bezPl, "Curved Text", sym);
bezTxtElm.SetName("New Splinned Text");
});
#endregion Create_CurveText
#region Create_PolygonText
await QueuedTask.Run(() =>
{
//Build geometry
List <Coordinate2D> plyCoords = new List <Coordinate2D>();
plyCoords.Add(new Coordinate2D(3.5, 7));
plyCoords.Add(new Coordinate2D(4.5, 7));
plyCoords.Add(new Coordinate2D(4.5, 6.7));
plyCoords.Add(new Coordinate2D(5.5, 6.7));
plyCoords.Add(new Coordinate2D(5.5, 6.1));
plyCoords.Add(new Coordinate2D(3.5, 6.1));
Polygon poly = PolygonBuilder.CreatePolygon(plyCoords);
//Set symbolology, create and add element to layout
CIMTextSymbol sym = SymbolFactory.Instance.ConstructTextSymbol(ColorFactory.Instance.GreyRGB, 10, "Arial", "Regular");
string text = "Some Text String that is really long and is <BOL>forced to wrap to other lines</BOL> so that we can see the effects." as String;
GraphicElement polyTxtElm = LayoutElementFactory.Instance.CreatePolygonParagraphGraphicElement(layout, poly, text, sym);
polyTxtElm.SetName("New Polygon Text");
//(Optionally) Modify paragraph border
CIMGraphic polyTxtGra = polyTxtElm.Graphic;
CIMParagraphTextGraphic cimPolyTxtGra = polyTxtGra as CIMParagraphTextGraphic;
cimPolyTxtGra.Frame.BorderSymbol = new CIMSymbolReference();
cimPolyTxtGra.Frame.BorderSymbol.Symbol = SymbolFactory.Instance.ConstructLineSymbol(ColorFactory.Instance.GreyRGB, 1.0, SimpleLineStyle.Solid);
polyTxtElm.SetGraphic(polyTxtGra);
});
#endregion Create_PolygonText
#region Create_CircleText
await QueuedTask.Run(() =>
{
//Build geometry
Coordinate2D center = new Coordinate2D(4.5, 4);
EllipticArcBuilder eabCir = new EllipticArcBuilder(center, 0.5, esriArcOrientation.esriArcClockwise);
EllipticArcSegment cir = eabCir.ToSegment();
//Set symbolology, create and add element to layout
CIMTextSymbol sym = SymbolFactory.Instance.ConstructTextSymbol(ColorFactory.Instance.GreenRGB, 10, "Arial", "Regular");
string text = "Circle, circle, circle, circle, circle, circle, circle, circle, circle, circle, circle";
GraphicElement cirTxtElm = LayoutElementFactory.Instance.CreateCircleParagraphGraphicElement(layout, cir, text, sym);
cirTxtElm.SetName("New Circle Text");
//(Optionally) Modify paragraph border
CIMGraphic cirTxtGra = cirTxtElm.Graphic;
CIMParagraphTextGraphic cimCirTxtGra = cirTxtGra as CIMParagraphTextGraphic;
cimCirTxtGra.Frame.BorderSymbol = new CIMSymbolReference();
cimCirTxtGra.Frame.BorderSymbol.Symbol = SymbolFactory.Instance.ConstructLineSymbol(ColorFactory.Instance.GreyRGB, 1.0, SimpleLineStyle.Solid);
cirTxtElm.SetGraphic(cirTxtGra);
});
#endregion Create_CircleText
#region Create_EllipseText
await QueuedTask.Run(() =>
{
//Build geometry
Coordinate2D center = new Coordinate2D(4.5, 2.75);
EllipticArcBuilder eabElp = new EllipticArcBuilder(center, 0, 1, 0.45, esriArcOrientation.esriArcClockwise);
EllipticArcSegment ellipse = eabElp.ToSegment();
//Set symbolology, create and add element to layout
CIMTextSymbol sym = SymbolFactory.Instance.ConstructTextSymbol(ColorFactory.Instance.BlueRGB, 10, "Arial", "Regular");
string text = "Ellipse, ellipse, ellipse, ellipse, ellipse, ellipse, ellipse, ellipse, ellipse, ellipse, ellipse, ellipse";
GraphicElement elpTxtElm = LayoutElementFactory.Instance.CreateEllipseParagraphGraphicElement(layout, ellipse, text, sym);
elpTxtElm.SetName("New Ellipse Text");
//(Optionally) Modify paragraph border
CIMGraphic elpTxtGra = elpTxtElm.Graphic;
CIMParagraphTextGraphic cimElpTxtGra = elpTxtGra as CIMParagraphTextGraphic;
cimElpTxtGra.Frame.BorderSymbol = new CIMSymbolReference();
cimElpTxtGra.Frame.BorderSymbol.Symbol = SymbolFactory.Instance.ConstructLineSymbol(ColorFactory.Instance.GreyRGB, 1.0, SimpleLineStyle.Solid);
elpTxtElm.SetGraphic(elpTxtGra);
});
#endregion Create_EllipseText
MapFrame mfElm = null;
#region Create_MapFrame
//This example creates a new map frame and changes the camera scale.
await QueuedTask.Run(() =>
{
//Build geometry
Coordinate2D ll = new Coordinate2D(6.0, 8.5);
Coordinate2D ur = new Coordinate2D(8.0, 10.5);
Envelope env = EnvelopeBuilder.CreateEnvelope(ll, ur);
//Reference map, create MF and add to layout
MapProjectItem mapPrjItem = Project.Current.GetItems <MapProjectItem>().FirstOrDefault(item => item.Name.Equals("Map"));
Map mfMap = mapPrjItem.GetMap();
mfElm = LayoutElementFactory.Instance.CreateMapFrame(layout, env, mfMap);
mfElm.SetName("New Map Frame");
//Set the camera
Camera camera = mfElm.Camera;
camera.Scale = 24000;
mfElm.SetCamera(camera);
});
#endregion Create_MapFrame
#region Create_ScaleBar
await QueuedTask.Run(() =>
{
//Reference a North Arrow in a style
StyleProjectItem stylePrjItm = Project.Current.GetItems <StyleProjectItem>().FirstOrDefault(item => item.Name == "ArcGIS 2D");
ScaleBarStyleItem sbStyleItm = stylePrjItm.SearchScaleBars("Double Alternating Scale Bar 1")[0];
//Build geometry
Coordinate2D center = new Coordinate2D(7, 8);
//Reference MF, create north arrow and add to layout
MapFrame mf = layout.FindElement("New Map Frame") as MapFrame;
if (mf == null)
{
ArcGIS.Desktop.Framework.Dialogs.MessageBox.Show("Map frame not found", "WARNING");
return;
}
ScaleBar sbElm = LayoutElementFactory.Instance.CreateScaleBar(layout, center, mf, sbStyleItm);
sbElm.SetName("New Scale Bar");
sbElm.SetWidth(2);
sbElm.SetX(6);
sbElm.SetY(7.5);
});
#endregion Create_ScaleBar
#region Create_NorthArrow
await QueuedTask.Run(() =>
{
//Reference a North Arrow in a style
StyleProjectItem stylePrjItm = Project.Current.GetItems <StyleProjectItem>().FirstOrDefault(item => item.Name == "ArcGIS 2D");
NorthArrowStyleItem naStyleItm = stylePrjItm.SearchNorthArrows("ArcGIS North 10")[0];
//Build geometry
Coordinate2D center = new Coordinate2D(7, 5.5);
//Reference MF, create north arrow and add to layout
MapFrame mf = layout.FindElement("New Map Frame") as MapFrame;
if (mf == null)
{
ArcGIS.Desktop.Framework.Dialogs.MessageBox.Show("Map frame not found", "WARNING");
return;
}
NorthArrow arrowElm = LayoutElementFactory.Instance.CreateNorthArrow(layout, center, mf, naStyleItm);
arrowElm.SetName("New North Arrow");
arrowElm.SetHeight(1.75);
arrowElm.SetX(7);
arrowElm.SetY(6);
});
#endregion Create_NorthArrow
}
