private static void SendHelloWord_BR() { //or start simpe qpid on windows : //cmd: qpidd --port=60302 --no-data-dir --auth=no String broker = "chengdudev6:21234"; string memberName = "ABCFR_ABCFRALMMACC1"; string broadcastAddress = "broadcast." + memberName + ".TradeConfirmation; { node: { type: queue }, create: never, mode: consume, assert: always }"; //string broadcastAddress = "request.ABCFR_ABCFRALMMACC1";//"bxu.testBinding";//"amq.direct";//"broadcast"; Connection connection = null; try { connection = new Connection(broker); connection.SetOption("username", "admin"); connection.SetOption("password", "admin"); connection.Open(); Session session = connection.CreateSession(); Sender sender = session.CreateSender(broadcastAddress); sender.Send(new Message("<FIXML>........</FIXML>")); session.Sync(); connection.Close(); } catch (Exception e) { Console.WriteLine("Exception {0}.", e); if (connection != null) { connection.Close(); } } }
private static void SendHelloWorld() { String broker = "chengdudev6:21234"; String address = "amq.topic"; Connection connection = null; try { connection = new Connection(broker); connection.SetOption("username", "admin"); connection.SetOption("password", "admin"); connection.Open(); Session session = connection.CreateSession(); Sender sender = session.CreateSender(address); var msg = new Message("<FIXML>........</FIXML>"); msg.Subject = "bxu.testBinding"; sender.Send(msg); //When sending the messages asynchronously, the session should be synchronized after every //few messages in order to make sure that the requests which were sent asynchronously were //delivered to the broker. session.Sync(); connection.Close(); } catch (Exception e) { Console.WriteLine("Exception {0}.", e); if (connection != null) { connection.Close(); } } }
private static void ReceiveHelloWorld() { String broker = "chengdudev6:21234"; string reseiverAddress = "bxu.testBinding"; //bxu.testBinging was binded to exchange "amq.topic" Connection connection = null; try { connection = new Connection(broker); connection.SetOption("username", "admin"); connection.SetOption("password", "admin"); connection.Open(); Session session = connection.CreateSession(); Receiver receiver = session.CreateReceiver(reseiverAddress); Message message = new Message(); message = receiver.Fetch(DurationConstants.SECOND * 1); Console.WriteLine("{0}", message.GetContent()); //The message should be acknowledged after its processing is finished. session.Acknowledge(); connection.Close(); } catch (Exception e) { Console.WriteLine("Exception {0}.", e); if (connection != null) { connection.Close(); } } }
/// <summary> /// Set INI file option on the remote server /// </summary> /// <param name="packageName">Name of package and group</param> /// <param name="variableName">Variable name</param> /// <param name="value">Value to set</param> public void SetOption(string packageName, string variableName, string value) { if (Connection != null) { Connection.SetOption(packageName, variableName, value); } }
public MyFormAppSession(String host) { credentialManager = new MyFormAppCredentialManager(); string proto = null; string envNameTccs = null; if (host.StartsWith("http")) { proto = SoaConstants.HTTP; } else if (host.StartsWith("tccs")) { proto = SoaConstants.TCCS; int envNameStart = host.IndexOf('/') + 2; envNameTccs = host.Substring(envNameStart, host.Length - envNameStart); } connection = new Connection(host, new System.Net.CookieCollection(), credentialManager, SoaConstants.REST, proto, false); if (proto == SoaConstants.TCCS) { connection.SetOption(Connection.TCCS_ENV_NAME, envNameTccs); } connection.ExceptionHandler = new MyFormAppExceptionHandler(); connection.ModelManager.AddPartialErrorListener(new MyFormAppPartialErrorListener()); connection.ModelManager.AddModelEventListener(new MyFormAppModelEventListener()); Connection.AddRequestListener(new MyFormAppRequestListener()); }
public void ConnectionSetOption() { Dictionary<string, object> options = new Dictionary<string, object>(); options["reconnect"] = true; Connection myConn = new Connection("url", options); myConn.SetOption("reconnect", false); Assert.IsFalse(myConn.IsOpen); }
public void ConnectionSetOption() { Dictionary <string, object> options = new Dictionary <string, object>(); options["reconnect"] = true; Connection myConn = new Connection("url", options); myConn.SetOption("reconnect", false); Assert.IsFalse(myConn.IsOpen); }
private static void SendReceiveHelloWord_SSL() { //or start simpe qpid on windows : //cmd: qpidd --port=60302 --no-data-dir --auth=no String broker = "amqp:ssl:chengdudev6:11234"; String address = "amq.topic"; // queue "bxu.testBinding" was binded to this exchange Connection connection = null; try { connection = new Connection(broker); connection.SetOption("username", "ABCFR_ABCFRALMMACC1"); connection.SetOption("transport", "ssl"); connection.SetOption("sasl_mechanisms", "EXTERNAL"); connection.Open(); Session session = connection.CreateSession(); Receiver receiver = session.CreateReceiver(address); Sender sender = session.CreateSender(address); sender.Send(new Message("<FIXML>........</FIXML>")); Message message = new Message(); message = receiver.Fetch(DurationConstants.SECOND * 1); Console.WriteLine("{0}", message.GetContent()); session.Acknowledge(); connection.Close(); } catch (Exception e) { Console.WriteLine("Exception {0}.", e); if (connection != null) { connection.Close(); } } }
private static void Send() { string brokerAddr = "amqp:ssl:chengdudev6:11234"; string failBrokerAddr = "amqp:ssl:chengdudev6:11234"; string memberName = "ABCFR_ABCFRALMMACC1"; string requestAddress = "request." + memberName + "; { node: { type: topic }, create: never }"; string replyAddress = "response/response." + memberName + ".response_queue_1; { create: receiver, node: { type: topic } }"; Connection connection = null; Session session; try { /* * Step 1: Preparing the connection and session */ connection = new Connection(brokerAddr); connection.SetOption("reconnect", true); connection.SetOption("reconnect_limit", 1); connection.SetOption("reconnect_urls", failBrokerAddr); connection.SetOption("username", "ABCFR_ABCFRALMMACC1"); connection.SetOption("transport", "ssl"); connection.SetOption("sasl_mechanisms", "EXTERNAL"); connection.Open(); session = connection.CreateSession(); /* * Step 2: Creating message producer */ Sender sender = session.CreateSender(requestAddress); /* * Step 3: Sending a message */ Message requestMsg = new Message("<FIXML>...</FIXML>"); Address ra = new Address(replyAddress); requestMsg.ReplyTo = ra; sender.Send(requestMsg); Console.WriteLine("Request sent: {0}", requestMsg.GetContent()); session.Sync(); connection.Close(); } catch (QpidException ex) { Console.WriteLine("QpidException caught: {0}", ex.Message); } finally { if (connection != null && connection.IsOpen) { Console.WriteLine("Closing the connection."); connection.Close(); } } }
private static void SendReceiveBindingHelloWord() { //or start simpe qpid on windows : //cmd: qpidd --port=60302 --no-data-dir --auth=no String broker = "chengdudev6:21234"; String senderAddress = "amq.topic"; // queue "bxu.testBinding" was binded to this exchange string reseiverAddress = "bxu.testBinding"; Connection connection = null; try { connection = new Connection(broker); connection.SetOption("username", "admin"); connection.SetOption("password", "admin"); connection.Open(); Session session = connection.CreateSession(); Receiver receiver = session.CreateReceiver(reseiverAddress); Sender sender = session.CreateSender(senderAddress); sender.Send(new Message("<FIXML>........</FIXML>")); Message message = new Message(); message = receiver.Fetch(DurationConstants.SECOND * 1); Console.WriteLine("{0}", message.GetContent()); session.Acknowledge(); connection.Close(); } catch (Exception e) { Console.WriteLine("Exception {0}.", e); if (connection != null) { connection.Close(); } } }
/** * Create an instance of the Session with a connection to the specified * server. * * Add implementations of the ExceptionHandler, PartialErrorListener, * ChangeListener, and DeleteListeners. * * @param host Address of the host to connect to, http://serverName:port/tc */ public Session(String host) { // Create an instance of the CredentialManager, this is used // by the SOA Framework to get the user's credentials when // challanged by the server (sesioin timeout on the web tier). credentialManager = new AppXCredentialManager(); string proto = null; string envNameTccs = null; if (host.StartsWith("http")) { proto = SoaConstants.HTTP; } else if (host.StartsWith("tccs")) { proto = SoaConstants.TCCS; int envNameStart = host.IndexOf('/') + 2; envNameTccs = host.Substring(envNameStart, host.Length - envNameStart); } // Create the Connection object, no contact is made with the server // until a service request is made connection = new Connection(host, new System.Net.CookieCollection(), credentialManager, SoaConstants.REST, proto, false); if (proto == SoaConstants.TCCS) { connection.SetOption(Connection.TCCS_ENV_NAME, envNameTccs); } // Add an ExceptionHandler to the Connection, this will handle any // InternalServerException, communication errors, xml marshalling errors // .etc connection.ExceptionHandler = new AppXExceptionHandler(); // While the above ExceptionHandler is required, all of the following // Listeners are optional. Client application can add as many or as few Listeners // of each type that they want. // Add a Partial Error Listener, this will be notified when ever a // a service returns partial errors. connection.ModelManager.AddPartialErrorListener(new AppXPartialErrorListener()); // Add a Change and Delete Listener, this will be notified when ever a // a service returns model objects that have been updated or deleted. connection.ModelManager.AddModelEventListener(new AppXModelEventListener()); // Add a Request Listener, this will be notified before and after each // service request is sent to the server. Connection.AddRequestListener(new AppXRequestListener()); }
public void ConnectionSetOption() { Dictionary <string, object> options = new Dictionary <string, object>(); options["id"] = 987654321; options["name"] = "Widget"; options["percent"] = 0.99; Connection myConn = new Connection("url", options); myConn.SetOption("name", "purple"); Assert.IsFalse(myConn.IsOpen); }
private static void SendHelloWord_SSL_BR() { //or start simpe qpid on windows : //cmd: qpidd --port=60302 --no-data-dir --auth=no String broker = "amqp:ssl:chengdudev6:11234"; string memberName = "ABCFR_ABCFRALMMACC1"; string broadcastAddress = "broadcast." + memberName + ".TradeConfirmation; { node: { type: queue }, create: never, mode: consume, assert: always }"; Connection connection = null; try { connection = new Connection(broker); connection.SetOption("username", "ABCFR_ABCFRALMMACC1"); connection.SetOption("transport", "ssl"); connection.SetOption("sasl_mechanisms", "EXTERNAL"); connection.Open(); Session session = connection.CreateSession(); Sender sender = session.CreateSender(broadcastAddress); sender.Send(new Message("<FIXML>........</FIXML>")); session.Sync(); connection.Close(); } catch (Exception e) { Console.WriteLine("Exception {0}.", e); if (connection != null) { connection.Close(); } } }
public void ConnectAndReceive() { try { _sessionReceiver = new TradeConfirmationReceiver(); /* * Step 1: Preparing the connection and session */ _connection = new Connection(_brokerAddress); _connection.SetOption("reconnect", true); _connection.SetOption("reconnect_limit", 2); _connection.SetOption("reconnect_urls", _failBrokerAddress); //must set the username, a little different with Eurex's Demo code //the username is case sensitive //be carful, the .cert's frendly is empty in LCMLO_LIQSPALBB.crt _connection.SetOption("username", _memberName); _connection.SetOption("transport", "ssl"); _connection.SetOption("sasl_mechanisms", "EXTERNAL"); _connection.SetOption("heartbeat", 60);//unit:seconds _connection.Open(); _session = _connection.CreateSession(); /* * Step 2: Create callback server and implicitly start it */ // The callback server is running and executing callbacks on a separate thread. _callbackServer = new CallbackServer(_session, _sessionReceiver); /* * Step 3: Creating message consumer */ _receiver = _session.CreateReceiver(_broadcastAddress); _receiver.Capacity = 100; } catch (QpidException ex) { _Log.Error("Make connection to AMQP broker failed!", ex); throw; } }
static void Main(string[] args) { //RequestResponse(); //return; //[[ The following two types of EnviromentVariable must set by manual, not here. //1) //System.Environment.SetEnvironmentVariable("QPID_SSL_CERT_STORE", "Personal", EnvironmentVariableTarget.Process); //System.Environment.SetEnvironmentVariable("QPID_SSL_CERT_NAME", "abcfr_abcfralmmacc1", EnvironmentVariableTarget.Process); //2) //System.Environment.SetEnvironmentVariable("QPID_LOG_ENABLE", "trace+", EnvironmentVariableTarget.Process); //System.Environment.SetEnvironmentVariable("QPID_SSL_CERT_FILENAME", @".\ABCFR_ABCFRALMMACC1.p12", EnvironmentVariableTarget.Process); //System.Environment.SetEnvironmentVariable("QPID_SSL_CERT_PASSWORD_FILE", @".\ABCFR_ABCFRALMMACC1.pwd", EnvironmentVariableTarget.Process); //System.Environment.SetEnvironmentVariable("QPID_SSL_CERT_NAME", "abcfr_abcfralmmacc1", EnvironmentVariableTarget.Process); //]] //string brokerAddr = args.Length > 0 ? args[0] : "amqp:ssl:192.168.34.11:11234"; //shit, seems must use the host name string brokerAddr = args.Length > 0 ? args[0] : "amqp:ssl:chengdudev6:11234"; string failBrokerAddr = args.Length > 1 ? args[1] : "amqp:ssl:chengdudev6:11234"; string memberName = "ABCFR_ABCFRALMMACC1"; string broadcastAddress = "broadcast." + memberName + ".TradeConfirmation; { node: { type: queue }, create: never, mode: consume, assert: always }"; Connection connection = null; Session session; try { /* * Step 1: Preparing the connection and session */ connection = new Connection(brokerAddr); connection.SetOption("reconnect", true); connection.SetOption("reconnect_limit", 2); connection.SetOption("reconnect_urls", failBrokerAddr); //shit, must set the username, a little different with Eurex's Demo code //shit, the username is case sensitive connection.SetOption("username", "ABCFR_ABCFRALMMACC1"); connection.SetOption("transport", "ssl"); connection.SetOption("sasl_mechanisms", "EXTERNAL"); //connection.SetOption("heartbeat", 120); connection.Open(); session = connection.CreateSession(); /* * Step 2: Create callback server and implicitly start it */ CallbackServer cbServer = new CallbackServer(session, new Listener()); // The callback server is running and executing callbacks on a separate thread. /* * Step 3: Creating message consumer */ Receiver receiver = session.CreateReceiver(broadcastAddress); receiver.Capacity = 100; Console.ReadLine(); //System.Threading.Thread.Sleep(20 * 1000); // in mS ///* // * Step 4: Stop the callback server and close receiver // */ //cbServer.Close(); //receiver.Close(); //session.Sync(); } catch (QpidException ex) { Console.WriteLine("QpidException caught: {0}", ex.Message); Console.WriteLine(); Console.WriteLine("Press any key to continue!"); Console.ReadLine(); } finally { if (connection != null && connection.IsOpen) { Console.WriteLine("Closing the connection."); connection.Close(); } } }
private static void SendHelloWorld() { String broker = "chengdudev6:21234"; String address = "amq.topic"; Connection connection = null; try { connection = new Connection(broker); connection.SetOption("username", "admin"); connection.SetOption("password", "admin"); connection.Open(); Session session = connection.CreateSession(); Sender sender = session.CreateSender(address); var msg = new Message("<FIXML>........</FIXML>"); msg.Subject = "bxu.testBinding"; sender.Send(msg); //When sending the messages asynchronously, the session should be synchronized after every //few messages in order to make sure that the requests which were sent asynchronously were //delivered to the broker. session.Sync(); connection.Close(); } catch (Exception e) { Console.WriteLine("Exception {0}.", e); if (connection != null) connection.Close(); } }
static int Main(string[] args) { string[] loggerOptions = { "", "--log-enable", "info+", "--log-to-stdout", "on", "--log-time", "on", "--log-level", "on" }; Logger logger = new Logger(); logger.Configure(loggerOptions); string brokerAddr = "amqp:ssl:ecag-fixml-simu1.deutsche-boerse.com:10170"; string connectionOptions = "{ }"; string replyAddress = "response/response.ABCFR_ABCFRALMMACC1.response_queue_1; { node: { type: topic }, assert: never, create: never }"; string requestAddress = "request.ABCFR_ABCFRALMMACC1; { node: { type: topic }, assert: never, create: never }"; string responseAddress = "response.ABCFR_ABCFRALMMACC1.response_queue_1; {create: receiver, assert: never, node: { type: queue, x-declare: { auto-delete: true, exclusive: true, arguments: {'qpid.policy_type': ring, 'qpid.max_count': 1000, 'qpid.max_size': 1000000}}, x-bindings: [{exchange: 'response', queue: 'response.ABCFR_ABCFRALMMACC1.response_queue_1', key: 'response.ABCFR_ABCFRALMMACC1.response_queue_1'}]}}"; Connection connection = null; Session session; try { /* * Step: Preparing the connection and session */ connection = new Connection(brokerAddr, connectionOptions); connection.SetOption("heartbeat", "30"); connection.SetOption("sasl_mechanisms", "EXTERNAL"); connection.Open(); session = connection.CreateSession(); Console.WriteLine("-I- Connection opened, session created"); /* * Step: Creating message consumer */ Receiver receiver = session.CreateReceiver(responseAddress); receiver.Capacity = 100; Sender sender = session.CreateSender(requestAddress); sender.Capacity = 100; Console.WriteLine("-I- Receiver and sender created "); /* * Step: Send request message */ Message requestMsg = new Message("<FIXML>...</FIXML>"); requestMsg.ReplyTo = new Address(replyAddress); sender.Send(requestMsg); Console.WriteLine("-I- Request sent: {0}", requestMsg.GetContent()); /* * Step: Receive response message */ Message msg = receiver.Fetch(DurationConstants.SECOND * 100); Console.WriteLine("-I- Response message received with content: {0}", msg.GetContent()); /* * Step: Stop the callback server and close receiver */ receiver.Close(); sender.Close(); session.Close(); } catch (QpidException ex) { Console.WriteLine("-E- QpidException caught: {0}", ex.Message); return(1); } finally { if (connection != null && connection.IsOpen) { Console.WriteLine("-I- Closing the connection."); connection.Close(); } } return(0); }
private static void ReceiveHelloWorld() { String broker = "chengdudev6:21234"; string reseiverAddress = "bxu.testBinding"; //bxu.testBinging was binded to exchange "amq.topic" Connection connection = null; try { connection = new Connection(broker); connection.SetOption("username", "admin"); connection.SetOption("password", "admin"); connection.Open(); Session session = connection.CreateSession(); Receiver receiver = session.CreateReceiver(reseiverAddress); Message message = new Message(); message = receiver.Fetch(DurationConstants.SECOND * 1); Console.WriteLine("{0}", message.GetContent()); //The message should be acknowledged after its processing is finished. session.Acknowledge(); connection.Close(); } catch (Exception e) { Console.WriteLine("Exception {0}.", e); if (connection != null) connection.Close(); } }
private static void SendReceiveHelloWord_SSL() { //or start simpe qpid on windows : //cmd: qpidd --port=60302 --no-data-dir --auth=no String broker = "amqp:ssl:chengdudev6:11234"; String address = "amq.topic"; // queue "bxu.testBinding" was binded to this exchange Connection connection = null; try { connection = new Connection(broker); connection.SetOption("username", "ABCFR_ABCFRALMMACC1"); connection.SetOption("transport", "ssl"); connection.SetOption("sasl_mechanisms", "EXTERNAL"); connection.Open(); Session session = connection.CreateSession(); Receiver receiver = session.CreateReceiver(address); Sender sender = session.CreateSender(address); sender.Send(new Message("<FIXML>........</FIXML>")); Message message = new Message(); message = receiver.Fetch(DurationConstants.SECOND * 1); Console.WriteLine("{0}", message.GetContent()); session.Acknowledge(); connection.Close(); } catch (Exception e) { Console.WriteLine("Exception {0}.", e); if (connection != null) connection.Close(); } }
private static void RequestResponse() { string brokerAddr = "amqp:ssl:chengdudev6:11234"; string failBrokerAddr = "amqp:ssl:chengdudev6:11234"; string memberName = "ABCFR_ABCFRALMMACC1"; string requestAddress = "request." + memberName + "; { node: { type: topic }, create: never }"; string replyAddress = "response/response." + memberName + ".response_queue_1; { create: receiver, node: { type: topic } }"; string responseAddress = "response." + memberName + ".response_queue_1; {create: receiver, assert: never," + "node: { type: queue, x-declare: { auto-delete: true, exclusive: false, arguments: {'qpid.policy_type': ring," + "'qpid.max_count': 1000, 'qpid.max_size': 1000000}}, x-bindings: [{exchange: 'response', queue: 'response." + memberName + ".response_queue_1', key: 'response." + memberName + ".response_queue_1'}]}}"; Connection connection = null; Session session; try { /* * Step 1: Preparing the connection and session */ connection = new Connection(brokerAddr); connection.SetOption("reconnect", true); connection.SetOption("reconnect_limit", 1); connection.SetOption("reconnect_urls", failBrokerAddr); connection.SetOption("username", "ABCFR_ABCFRALMMACC1"); connection.SetOption("transport", "ssl"); connection.SetOption("sasl_mechanisms", "EXTERNAL"); connection.Open(); session = connection.CreateSession(); /* * Step 2: Creating message consumer */ Receiver receiver = session.CreateReceiver(responseAddress); /* * Step 2: Creating message producer */ Sender sender = session.CreateSender(requestAddress); /* * Step 3: Sending a message */ Message requestMsg = new Message("<FIXML>...</FIXML>"); Address ra = new Address(replyAddress); requestMsg.ReplyTo = ra; sender.Send(requestMsg); Console.WriteLine("Request sent: {0}", requestMsg.GetContent()); session.Sync(); /* * Step 3: Receiving a message */ Message msg = receiver.Fetch(DurationConstants.SECOND * 10); Console.WriteLine("RECEIVED MESSAGE:"); Console.WriteLine("#################"); Console.WriteLine(msg.GetContent()); session.Acknowledge(); connection.Close(); } catch (QpidException ex) { Console.WriteLine("QpidException caught: {0}", ex.Message); } finally { if (connection != null && connection.IsOpen) { Console.WriteLine("Closing the connection."); connection.Close(); } } }
private static void SendReceiveBindingHelloWord() { //or start simpe qpid on windows : //cmd: qpidd --port=60302 --no-data-dir --auth=no String broker = "chengdudev6:21234"; String senderAddress = "amq.topic"; // queue "bxu.testBinding" was binded to this exchange string reseiverAddress = "bxu.testBinding"; Connection connection = null; try { connection = new Connection(broker); connection.SetOption("username", "admin"); connection.SetOption("password", "admin"); connection.Open(); Session session = connection.CreateSession(); Receiver receiver = session.CreateReceiver(reseiverAddress); Sender sender = session.CreateSender(senderAddress); sender.Send(new Message("<FIXML>........</FIXML>")); Message message = new Message(); message = receiver.Fetch(DurationConstants.SECOND * 1); Console.WriteLine("{0}", message.GetContent()); session.Acknowledge(); connection.Close(); } catch (Exception e) { Console.WriteLine("Exception {0}.", e); if (connection != null) connection.Close(); } }
static int Main(string[] args) { string[] loggerOptions = { "", "--log-enable", "info+", "--log-to-stdout", "on", "--log-time", "on", "--log-level", "on" }; Logger logger = new Logger(); logger.Configure(loggerOptions); string brokerAddr = "amqp:ssl:ecag-fixml-simu1.deutsche-boerse.com:10170"; string connectionOptions = "{ protocol: amqp1.0 }"; string replyAddress = "response/response.CBKFR_TESTCALMMACC1; { node: { type: topic }, assert: never, create: never }"; string requestAddress = "request.CBKFR_TESTCALMMACC1; { node: { type: topic }, assert: never, create: never }"; string responseAddress = "response.CBKFR_TESTCALMMACC1; {create: never, assert: never, node: { type: queue } }"; Connection connection = null; Session session; try { /* * Step: Preparing the connection and session */ connection = new Connection(brokerAddr, connectionOptions); connection.SetOption("sasl_mechanisms", "EXTERNAL"); connection.Open(); session = connection.CreateSession(); Console.WriteLine("-I- Connection opened, session created"); /* * Step: Creating message consumer */ Receiver receiver = session.CreateReceiver(responseAddress); receiver.Capacity = 100; Sender sender = session.CreateSender(requestAddress); sender.Capacity = 100; Console.WriteLine("-I- Receiver and sender created "); /* * Step: Send request message */ Message requestMsg = new Message("<FIXML>...</FIXML>"); requestMsg.ReplyTo = new Address(replyAddress); sender.Send(requestMsg); Console.WriteLine("-I- Request sent: {0}", requestMsg.GetContent()); /* * Step: Receive response message */ Message msg = receiver.Fetch(DurationConstants.SECOND * 100); Console.WriteLine("-I- Response message received with content: {0}", msg.GetContent()); /* * Step: Stop the callback server and close receiver */ receiver.Close(); sender.Close(); session.Close(); } catch (QpidException ex) { Console.WriteLine("-E- QpidException caught: {0}", ex.Message); return(1); } finally { if (connection != null && connection.IsOpen) { Console.WriteLine("-I- Closing the connection."); connection.Close(); } } return(0); }
public void ConnectionSetOption() { Dictionary<string, object> options = new Dictionary<string, object>(); options["id"] = 987654321; options["name"] = "Widget"; options["percent"] = 0.99; Connection myConn = new Connection("url", options); myConn.SetOption("name", "purple"); Assert.IsFalse(myConn.IsOpen); }
private static void SendHelloWord_SSL_BR() { //or start simpe qpid on windows : //cmd: qpidd --port=60302 --no-data-dir --auth=no String broker = "amqp:ssl:chengdudev6:11234"; string memberName = "ABCFR_ABCFRALMMACC1"; string broadcastAddress = "broadcast." + memberName + ".TradeConfirmation; { node: { type: queue }, create: never, mode: consume, assert: always }"; Connection connection = null; try { connection = new Connection(broker); connection.SetOption("username", "ABCFR_ABCFRALMMACC1"); connection.SetOption("transport", "ssl"); connection.SetOption("sasl_mechanisms", "EXTERNAL"); connection.Open(); Session session = connection.CreateSession(); Sender sender = session.CreateSender(broadcastAddress); sender.Send(new Message("<FIXML>........</FIXML>")); session.Sync(); connection.Close(); } catch (Exception e) { Console.WriteLine("Exception {0}.", e); if (connection != null) connection.Close(); } }
static int Main(string[] args) { string[] loggerOptions = { "", "--log-enable", "info+", "--log-to-stdout", "on", "--log-time", "on", "--log-level", "on" }; Logger logger = new Logger(); logger.Configure(loggerOptions); string brokerAddr = "amqp:ssl:ecag-fixml-simu1.deutsche-boerse.com:10170"; string connectionOptions = "{ protocol: amqp1.0}"; string broadcastAddress = "broadcast.ABCFR_ABCFRALMMACC1.TradeConfirmation; { node: { type: queue }, create: never, mode: consume, assert: never }"; Connection connection = null; Session session; try { /* * Step 1: Preparing the connection and session */ connection = new Connection(brokerAddr, connectionOptions); connection.SetOption("sasl_mechanisms", "EXTERNAL"); connection.Open(); session = connection.CreateSession(); Console.WriteLine("-I- Connection opened, session created"); /* * Step 2: Create callback server and implicitly start it */ // The callback server is running and executing callbacks on a separate thread. SessionReceiver.CallbackServer cbServer = new SessionReceiver.CallbackServer(session, new Listener()); /* * Step 3: Creating message consumer */ Receiver receiver = session.CreateReceiver(broadcastAddress); Console.WriteLine("-I- Receiver created "); receiver.Capacity = 100; System.Threading.Thread.Sleep(100 * 1000); // in mS /* * Step 4: Stop the callback server and close receiver */ receiver.Close(); cbServer.Close(); session.Close(); } catch (QpidException ex) { Console.WriteLine("-E- QpidException caught: {0}", ex.Message); return(1); } finally { if (connection != null && connection.IsOpen) { Console.WriteLine("-I- Closing the connection."); connection.Close(); } } return(0); }
private static void SendHelloWord_BR() { //or start simpe qpid on windows : //cmd: qpidd --port=60302 --no-data-dir --auth=no String broker = "chengdudev6:21234"; string memberName = "ABCFR_ABCFRALMMACC1"; string broadcastAddress = "broadcast." + memberName + ".TradeConfirmation; { node: { type: queue }, create: never, mode: consume, assert: always }"; //string broadcastAddress = "request.ABCFR_ABCFRALMMACC1";//"bxu.testBinding";//"amq.direct";//"broadcast"; Connection connection = null; try { connection = new Connection(broker); connection.SetOption("username", "admin"); connection.SetOption("password", "admin"); connection.Open(); Session session = connection.CreateSession(); Sender sender = session.CreateSender(broadcastAddress); sender.Send(new Message("<FIXML>........</FIXML>")); session.Sync(); connection.Close(); } catch (Exception e) { Console.WriteLine("Exception {0}.", e); if (connection != null) connection.Close(); } }