/*======================================================================
| MAIN PROGRAM
| =====================================================================*/
public static void Main(String[] args)
{
int handle = 0;
int port = 0; // open port 0 by default
int bitrate = 0;
int mode = 0;
ushort arg5 = 0;
ushort arg6 = 0;
String command = "";
String binfilepath = "";
Byte[] data;
if (args.Length < 6)
{
print_usage();
Environment.Exit(1);
}
port = Convert.ToInt32(args[0]);
bitrate = Convert.ToInt32(args[1]);
mode = Convert.ToInt32(args[2]);
command = args[3];
arg5 = Convert.ToUInt16(args[4]);
arg6 = Convert.ToUInt16(args[5]);
if (args.Length > 6)
{
binfilepath = args[6];
}
handle = CheetahApi.ch_open(port);
if (handle <= 0)
{
Console.Error.Write(
"Unable to open Cheetah device on port {0:d}\n", port);
Console.Error.Write("Error code = {0:d} ({1:s})\n", handle,
CheetahApi.ch_status_string(handle));
Environment.Exit(1);
}
Console.Write("Opened Cheetah device on port {0:d}\n", port);
Console.Write("Host interface is {0:s}\n",
((CheetahApi.ch_host_ifce_speed(handle)) != 0) ?
"high speed" : "full speed");
// Ensure that the SPI subsystem is configured.
CheetahApi.ch_spi_configure(
handle,
(TotalPhase.CheetahSpiPolarity)(mode >> 1),
(TotalPhase.CheetahSpiPhase)(mode & 1),
CheetahSpiBitorder.CH_SPI_BITORDER_MSB, 0x0);
Console.Write("SPI configuration set to mode {0:d}, {1:s} shift, " +
"SS[2:0] active low\n", mode, "MSB");
Console.Out.Flush();
// Power off the target using the Cheetah adapter's power supply.
CheetahApi.ch_target_power(handle, CheetahApi.CH_TARGET_POWER_OFF);
CheetahApi.ch_sleep_ms(100);
// Power the target using the Cheetah adapter's power supply.
CheetahApi.ch_target_power(handle, CheetahApi.CH_TARGET_POWER_ON);
CheetahApi.ch_sleep_ms(100);
// Set the bitrate.
bitrate = CheetahApi.ch_spi_bitrate(handle, bitrate);
Console.Write("Bitrate set to {0:d} kHz\n", bitrate);
Console.Out.Flush();
// Determine which command transaction type was requested.
int commandID = -1;
if (command == "read")
{
commandID = COMMAND_READ;
}
else if (command == "write")
{
commandID = COMMAND_WRITE;
}
else if (command == "erase")
{
commandID = COMMAND_ERASE;
}
else if (command == "verify")
{
commandID = COMMAND_VERIFY;
}
else
{
Console.Write("Unknown option: {0:s}\n", command);
Console.Write("Valid options are: read, write, erase, " +
"and verify\n\n");
print_usage();
Environment.Exit(1);
}
// Execute the appropriate command.
switch (commandID)
{
case COMMAND_READ:
_read(handle, arg5, arg6, out data);
break;
case COMMAND_WRITE:
_write(handle, arg5, binfilepath);
break;
case COMMAND_ERASE:
_erase(handle, arg5, arg6);
break;
case COMMAND_VERIFY:
_verify(handle, arg5 * 1024, arg6 * 1024);
break;
}
// Power off the target using the Cheetah adapter's power supply.
CheetahApi.ch_target_power(handle, CheetahApi.CH_TARGET_POWER_OFF);
// Close the device.
CheetahApi.ch_close(handle);
return;
}
/*======================================================================
| MAIN PROGRAM
| =====================================================================*/
public static void Main(String[] args)
{
int handle = 0;
int port = 0; // open port 0 by default
int bitrate = 0;
int mode = 0;
int bitorder = 0;
int length = 0;
if (args.Length < 5)
{
print_usage();
Environment.Exit(1);
}
port = Convert.ToInt32(args[0]);
bitrate = Convert.ToInt32(args[1]);
mode = Convert.ToInt32(args[2]);
bitorder = Convert.ToInt32(args[3]);
length = Convert.ToInt32(args[4]);
handle = CheetahApi.ch_open(port);
if (handle <= 0)
{
Console.Error.Write(
"Unable to open Cheetah device on port {0:d}\n", port);
Console.Error.Write("Error code = {0:d} ({1:s})\n", handle,
CheetahApi.ch_status_string(handle));
Environment.Exit(1);
}
Console.Write("Opened Cheetah device on port {0:d}\n", port);
Console.Write("Host interface is {0:s}\n",
((CheetahApi.ch_host_ifce_speed(handle)) != 0) ?
"high speed" : "full speed");
// Ensure that the SPI subsystem is configured.
// Make sure that the bitorder parameter is valid, defaulting to LSB
CheetahSpiBitorder spi_bitorder =
(bitorder == (int)CheetahSpiBitorder.CH_SPI_BITORDER_MSB) ?
CheetahSpiBitorder.CH_SPI_BITORDER_MSB :
CheetahSpiBitorder.CH_SPI_BITORDER_LSB;
CheetahApi.ch_spi_configure(
handle,
(CheetahSpiPolarity)(mode >> 1),
(CheetahSpiPhase)(mode & 1),
spi_bitorder,
0x0);
Console.Write(
"SPI configuration set to mode {0:d}, {1:s} shift, " +
"SS[2:0] active low\n", mode,
(spi_bitorder == CheetahSpiBitorder.CH_SPI_BITORDER_MSB) ?
"MSB" : "LSB");
Console.Out.Flush();
// Power the target using the Cheetah adapter's power supply.
CheetahApi.ch_target_power(handle, CheetahApi.CH_TARGET_POWER_ON);
CheetahApi.ch_sleep_ms(100);
// Set the bitrate.
bitrate = CheetahApi.ch_spi_bitrate(handle, bitrate);
Console.Write("Bitrate set to {0:d} kHz\n", bitrate);
Console.Out.Flush();
_blast(handle, length);
// Close and exit.
CheetahApi.ch_close(handle);
return;
}
/*=========================================================================
| MAIN PROGRAM
| ========================================================================*/
public static void Main(String[] args)
{
int handle = 0;
int port = 0; // open port 0 by default
int bitrate = 0;
int mode = 0;
ushort addr = 0;
ushort length = 0;
String command = "";
if (args.Length < 6)
{
print_usage();
Environment.Exit(1);
}
port = Convert.ToInt32(args[0]);
bitrate = Convert.ToInt32(args[1]);
mode = Convert.ToInt32(args[2]);
command = args[3];
addr = Convert.ToUInt16(args[4]);
length = Convert.ToUInt16(args[5]);
// Open the device
handle = CheetahApi.ch_open(port);
if (handle <= 0)
{
Console.Error.Write(
"Unable to open Cheetah device on port {0:d}\n", port);
Console.Error.Write("Error code = {0:d} ({1:s})\n", handle,
CheetahApi.ch_status_string(handle));
Environment.Exit(1);
}
Console.Write("Opened Cheetah device on port {0:d}\n", port);
Console.Write("Host interface is {0:s}\n",
((CheetahApi.ch_host_ifce_speed(handle)) != 0) ?
"high speed" : "full speed");
// Ensure that the SPI subsystem is configured
CheetahApi.ch_spi_configure(
handle,
(TotalPhase.CheetahSpiPolarity)(mode >> 1),
(TotalPhase.CheetahSpiPhase)(mode & 1),
CheetahSpiBitorder.CH_SPI_BITORDER_MSB, 0x0);
Console.Write("SPI configuration set to mode {0:d}, {1:s} shift, " +
"SS[2:0] active low\n", mode, "MSB");
Console.Out.Flush();
// Power the target using the Cheetah adapter's power supply
CheetahApi.ch_target_power(handle, CheetahApi.CH_TARGET_POWER_ON);
CheetahApi.ch_sleep_ms(100);
// Set the bitrate
bitrate = CheetahApi.ch_spi_bitrate(handle, bitrate);
Console.Write("Bitrate set to {0:d} kHz\n", bitrate);
Console.Out.Flush();
byte[] noresult = new byte[1];
// Shift a dummy byte to clear the EEPROM state
CheetahApi.ch_spi_queue_clear(handle);
CheetahApi.ch_spi_queue_oe(handle, 1);
CheetahApi.ch_spi_queue_ss(handle, 0x1);
CheetahApi.ch_spi_queue_byte(handle, 1, 0x00);
CheetahApi.ch_spi_queue_ss(handle, 0);
CheetahApi.ch_spi_batch_shift(handle, 0, noresult);
// Perform the requested operation
if (command == "write")
{
_writeMemory(handle, addr, length, 0);
Console.Write("Wrote to EEPROM\n");
}
else if (command == "read")
{
_readMemory(handle, addr, length);
}
else if (command == "zero")
{
_writeMemory(handle, addr, length, 1);
Console.Write("Zeroed EEPROM\n");
}
else
{
Console.Write("unknown command: {0:s}\n", command);
}
// Close and exit
CheetahApi.ch_close(handle);
return;
}