/// <summary>
/// Exports mullion.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="mullion">
/// The mullion object.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="localPlacement">
/// The local placement handle.
/// </param>
/// <param name="extraParams">
/// The extrusion creation data.
/// </param>
/// <param name="setter">
/// The IFCPlacementSetter.
/// </param>
/// <param name="productWrapper">
/// The IFCProductWrapper.
/// </param>
public static void Export(ExporterIFC exporterIFC, Mullion mullion, GeometryElement geometryElement,
IFCAnyHandle localPlacement, IFCExtrusionCreationData extraParams, IFCPlacementSetter setter, IFCProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
ElementId catId = CategoryUtil.GetSafeCategoryId(mullion);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
IFCAnyHandle repHnd = RepresentationUtil.CreateBRepProductDefinitionShape(mullion.Document.Application, exporterIFC, mullion, catId,
geometryElement, bodyExporterOptions, null, extraParams);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(repHnd))
{
extraParams.ClearOpenings();
return;
}
string elemGUID = ExporterIFCUtils.CreateGUID(mullion);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string elemObjectType = NamingUtil.CreateIFCObjectName(exporterIFC, mullion);
string elemId = NamingUtil.CreateIFCElementId(mullion);
IFCAnyHandle mullionHnd = IFCInstanceExporter.CreateMember(file, elemGUID, ownerHistory, elemObjectType, null, elemObjectType,
localPlacement, repHnd, elemId);
productWrapper.AddElement(mullionHnd, setter, extraParams, LevelUtil.AssociateElementToLevel(mullion));
PropertyUtil.CreateInternalRevitPropertySets(exporterIFC, mullion, productWrapper);
}
/// <summary>
/// Exports an element as a covering of type insulation.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if exported successfully, false otherwise.</returns>
public static bool ExportDuctLining(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper)
{
if (element == null || geometryElement == null)
{
return(false);
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcCovering;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return(false);
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainer = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainer);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainer))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(false);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
IFCAnyHandle ductLining = IFCInstanceExporter.CreateCovering(exporterIFC, element, guid,
ownerHistory, localPlacement, representation, "Wrapping");
ExporterCacheManager.ElementToHandleCache.Register(element.Id, ductLining);
productWrapper.AddElement(element, ductLining, placementSetter.LevelInfo, ecData, true);
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element);
CategoryUtil.CreateMaterialAssociation(exporterIFC, ductLining, matId);
}
}
tr.Commit();
return(true);
}
}
/// <summary>
/// Exports a hosted weep.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="hostedSweep">The hosted sweep element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void Export(ExporterIFC exporterIFC, HostedSweep hostedSweep, GeometryElement geometryElement, ProductWrapper productWrapper)
{
ElementId catId = CategoryUtil.GetSafeCategoryId(hostedSweep);
if (catId == new ElementId(BuiltInCategory.OST_Gutter))
ExportGutter(exporterIFC, hostedSweep, geometryElement, productWrapper);
else
ProxyElementExporter.Export(exporterIFC, hostedSweep, geometryElement, productWrapper);
}
/// <summary>
/// Exports an element as building element proxy.
/// </summary>
/// <remarks>
/// This function is called from the Export function, but can also be called directly if you do not
/// want CreateInternalPropertySets to be called.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>The handle if created, null otherwise.</returns>
public static IFCAnyHandle ExportBuildingElementProxy(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper, IFCExportInfoPair exportType = null)
{
if (element == null || geometryElement == null)
{
return(null);
}
if (exportType == null)
{
exportType = new IFCExportInfoPair(IFCEntityType.IfcBuildingElementProxy, IFCEntityType.IfcBuildingElementProxyType, "NOTDEFINED");
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcBuildingElementProxy;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return(null);
}
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle buildingElementProxy = null;
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(null);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
buildingElementProxy = IFCInstanceExporter.CreateBuildingElementProxy(exporterIFC, element, guid,
ownerHistory, localPlacement, representation, exportType.ValidatedPredefinedType);
productWrapper.AddElement(element, buildingElementProxy, placementSetter.LevelInfo, ecData, true);
}
tr.Commit();
}
}
return(buildingElementProxy);
}
/// <summary>
/// Exports an element as a covering of type insulation.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if exported successfully, false otherwise.</returns>
public static bool ExportDuctLining(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper)
{
if (element == null || geometryElement == null)
{
return(false);
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(false);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string revitObjectType = exporterIFC.GetFamilyName();
string name = NamingUtil.GetNameOverride(element, revitObjectType);
string description = NamingUtil.GetDescriptionOverride(element, null);
string objectType = NamingUtil.GetObjectTypeOverride(element, revitObjectType);
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
string elementTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
IFCAnyHandle ductLining = IFCInstanceExporter.CreateCovering(file, guid,
ownerHistory, name, description, objectType, localPlacement, representation, elementTag, "Wrapping");
ExporterCacheManager.ElementToHandleCache.Register(element.Id, ductLining);
productWrapper.AddElement(element, ductLining, placementSetter.LevelInfo, ecData, true);
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element);
CategoryUtil.CreateMaterialAssociation(exporterIFC, ductLining, matId);
}
}
tr.Commit();
return(true);
}
}
/// <summary>
/// Exports an element as building element proxy.
/// </summary>
/// <remarks>
/// This function is called from the Export function, but can also be called directly if you do not
/// want CreateInternalPropertySets to be called.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>The handle if created, null otherwise.</returns>
public static IFCAnyHandle ExportBuildingElementProxy(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper)
{
if (element == null || geometryElement == null)
{
return(null);
}
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle buildingElementProxy = null;
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(null);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string revitObjectType = exporterIFC.GetFamilyName();
string name = NamingUtil.GetNameOverride(element, revitObjectType);
string description = NamingUtil.GetDescriptionOverride(element, null);
string objectType = NamingUtil.GetObjectTypeOverride(element, revitObjectType);
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
string elementTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
buildingElementProxy = IFCInstanceExporter.CreateBuildingElementProxy(file, guid,
ownerHistory, name, description, objectType, localPlacement, representation, elementTag, null);
productWrapper.AddElement(element, buildingElementProxy, placementSetter.LevelInfo, ecData, true);
}
tr.Commit();
}
}
return(buildingElementProxy);
}
/// <summary>
/// Calculates the area.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="extrusionCreationData">The IFCExtrusionCreationData.</param>
/// <param name="element">The element to calculate the value.</param>
/// <param name="elementType">The element type.</param>
/// <returns>True if the operation succeed, false otherwise.</returns>
public override bool Calculate(ExporterIFC exporterIFC, IFCExtrusionCreationData extrusionCreationData, Element element, ElementType elementType, EntryMap entryMap)
{
double height = 0.0;
double width = 0.0;
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
// Work for Door element
if (categoryId == new ElementId(BuiltInCategory.OST_Doors))
{
if ((ParameterUtil.GetDoubleValueFromElementOrSymbol(element, BuiltInParameter.DOOR_HEIGHT, out height) != null) &&
(ParameterUtil.GetDoubleValueFromElementOrSymbol(element, BuiltInParameter.DOOR_WIDTH, out width) != null))
{
m_Area = UnitUtil.ScaleArea(height * width);
return(true);
}
}
// Work for Window element
if (categoryId == new ElementId(BuiltInCategory.OST_Windows))
{
if ((ParameterUtil.GetDoubleValueFromElementOrSymbol(element, BuiltInParameter.WINDOW_HEIGHT, out height) != null) &&
(ParameterUtil.GetDoubleValueFromElementOrSymbol(element, BuiltInParameter.WINDOW_WIDTH, out width) != null))
{
m_Area = UnitUtil.ScaleArea(height * width);
return(true);
}
}
// If no value from the above, consider the parameter override
if ((ParameterUtil.GetDoubleValueFromElementOrSymbol(element, entryMap.RevitParameterName, out m_Area) != null) ||
(ParameterUtil.GetDoubleValueFromElementOrSymbol(element, entryMap.CompatibleRevitParameterName, out m_Area) != null) ||
(ParameterUtil.GetDoubleValueFromElementOrSymbol(element, "IfcQtyArea", out m_Area) != null)) // IfcQty* is deprecated
{
m_Area = UnitUtil.ScaleArea(m_Area);
if (m_Area > MathUtil.Eps() * MathUtil.Eps())
{
return(true);
}
}
// Work for Space element or other element that has extrusion
if (extrusionCreationData == null)
{
return(false);
}
m_Area = extrusionCreationData.ScaledArea;
return(m_Area > MathUtil.Eps() * MathUtil.Eps());
}
/// <summary>
/// Exports mullion.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="mullion">
/// The mullion object.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="localPlacement">
/// The local placement handle.
/// </param>
/// <param name="setter">
/// The IFCPlacementSetter.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void Export(ExporterIFC exporterIFC, Mullion mullion, GeometryElement geometryElement,
IFCAnyHandle localPlacement, IFCPlacementSetter setter, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
using (IFCPlacementSetter mullionSetter = IFCPlacementSetter.Create(exporterIFC, mullion, null, null, ExporterUtil.GetBaseLevelIdForElement(mullion)))
{
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
IFCAnyHandle mullionPlacement = mullionSetter.GetPlacement();
Transform relTrf = ExporterIFCUtils.GetRelativeLocalPlacementOffsetTransform(localPlacement, mullionPlacement);
Transform inverseTrf = relTrf.Inverse;
IFCAnyHandle mullionRelativePlacement = ExporterUtil.CreateAxis2Placement3D(file, inverseTrf.Origin, inverseTrf.BasisZ, inverseTrf.BasisX);
IFCAnyHandle mullionLocalPlacement = IFCInstanceExporter.CreateLocalPlacement(file, localPlacement, mullionRelativePlacement);
extraParams.SetLocalPlacement(mullionLocalPlacement);
ElementId catId = CategoryUtil.GetSafeCategoryId(mullion);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
IFCAnyHandle repHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, mullion, catId,
geometryElement, bodyExporterOptions, null, extraParams, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(repHnd))
{
extraParams.ClearOpenings();
return;
}
string elemGUID = GUIDUtil.CreateGUID(mullion);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string elemObjectType = NamingUtil.CreateIFCObjectName(exporterIFC, mullion);
string name = NamingUtil.GetNameOverride(mullion, elemObjectType);
string description = NamingUtil.GetDescriptionOverride(mullion, null);
string objectType = NamingUtil.GetObjectTypeOverride(mullion, elemObjectType);
string elemTag = NamingUtil.GetTagOverride(mullion, NamingUtil.CreateIFCElementId(mullion));
IFCAnyHandle mullionHnd = IFCInstanceExporter.CreateMember(file, elemGUID, ownerHistory, name, description, objectType,
mullionLocalPlacement, repHnd, elemTag);
ExporterCacheManager.HandleToElementCache.Register(mullionHnd, mullion.Id);
productWrapper.AddElement(mullion, mullionHnd, mullionSetter, extraParams, false);
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, mullion);
CategoryUtil.CreateMaterialAssociation(exporterIFC, mullionHnd, matId);
}
}
}
/// <summary>
/// Exports an element as a covering of type insulation.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The IFCProductWrapper.</param>
/// <returns>True if exported successfully, false otherwise.</returns>
public static bool ExportDuctLining(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, IFCProductWrapper productWrapper)
{
if (element == null || geometryElement == null)
{
return(false);
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (IFCPlacementSetter placementSetter = IFCPlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.GetPlacement());
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
IFCAnyHandle representation = RepresentationUtil.CreateBRepProductDefinitionShape(element.Document.Application, exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(false);
}
string guid = ExporterIFCUtils.CreateGUID(element);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string objectType = exporterIFC.GetFamilyName();
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
string elementTag = NamingUtil.CreateIFCElementId(element);
IFCAnyHandle ductLining = IFCInstanceExporter.CreateCovering(file, guid,
ownerHistory, objectType, null, objectType, localPlacement, representation, elementTag, IFCCoveringType.Wrapping);
productWrapper.AddElement(ductLining, placementSetter.GetLevelInfo(), ecData, LevelUtil.AssociateElementToLevel(element));
PropertyUtil.CreateInternalRevitPropertySets(exporterIFC, element, productWrapper);
}
}
tr.Commit();
return(true);
}
}
/// <summary>
/// Calculates load bearing value for a wall.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="calcValues">The IFCExtrusionCreationData.</param>
/// <param name="element">The element to calculate the value.</param>
/// <param name="elementType">The element type.</param>
/// <returns>True if the operation succeeded, false otherwise.</returns>
public override bool Calculate(ExporterIFC exporterIFC, IFCExtrusionCreationData extrusionCreationData, Element element, ElementType elementType, EntryMap entryMap)
{
Wall wall = element as Wall;
if (wall != null)
{
m_LoadBearing = wall.StructuralUsage == StructuralWallUsage.Bearing;
return(true);
}
// This may be set for Column, Beam, Brace
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
if (catId == new ElementId(BuiltInCategory.OST_StructuralColumns) ||
catId == new ElementId(BuiltInCategory.OST_StructuralFraming) ||
catId == new ElementId(BuiltInCategory.OST_StructuralFramingSystem) ||
catId == new ElementId(BuiltInCategory.OST_StructuralTruss))
{
m_LoadBearing = true;
return(true);
}
// This is for Floor/Slab
Parameter parameter = element.get_Parameter(BuiltInParameter.FLOOR_PARAM_IS_STRUCTURAL);
if (parameter != null && parameter.HasValue && parameter.StorageType == StorageType.Integer)
{
m_LoadBearing = (parameter.AsInteger() != 0) ? true : false;
return(true);
}
// If other entities, look for the parameter value for Load Bearing
int?intLoadBearing = ParameterUtil.GetIntValueFromElementOrSymbol(element, entryMap.RevitParameterName);
if (!intLoadBearing.HasValue)
{
ParameterUtil.GetIntValueFromElementOrSymbol(element, entryMap.CompatibleRevitParameterName);
}
if (!intLoadBearing.HasValue)
{
return(false);
}
m_LoadBearing = (intLoadBearing.Value != 0);
return(true);
}
/// <summary>
/// Calculates load bearing value for a wall.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="calcValues">
/// The IFCExtrusionCreationData.
/// </param>
/// <param name="element">
/// The element to calculate the value.
/// </param>
/// <param name="elementType">
/// The element type.
/// </param>
/// <returns>
/// True if the operation succeed, false otherwise.
/// </returns>
public override bool Calculate(ExporterIFC exporterIFC, IFCExtrusionCreationData extrusionCreationData, Element element, ElementType elementType)
{
Wall wall = element as Wall;
if (wall != null)
{
m_LoadBearing = wall.StructuralUsage == StructuralWallUsage.Bearing;
return(true);
}
// This may be set for Column
if (CategoryUtil.GetSafeCategoryId(element) == new ElementId(BuiltInCategory.OST_StructuralColumns))
{
m_LoadBearing = true;
return(true);
}
// This is for Floor/Slab
Parameter parameter = element.get_Parameter(BuiltInParameter.FLOOR_PARAM_IS_STRUCTURAL);
if (parameter != null && parameter.HasValue && parameter.StorageType == StorageType.Integer)
{
m_LoadBearing = (parameter.AsInteger() != 0) ? true : false;
return(true);
}
// If other entities, look for the parameter value for Load Bearing
int intLoadBearing = 0;
if (ParameterUtil.GetIntValueFromElementOrSymbol(element, "IfcLoadBearing", out intLoadBearing) == null)
{
if (ParameterUtil.GetIntValueFromElementOrSymbol(element, "LoadBearing", out intLoadBearing) == null)
{
return(false);
}
}
m_LoadBearing = (intLoadBearing != 0);
return(true);
}
/// <summary>
/// Checks if the element is legacy curtain element.
/// </summary>
/// <param name="element">The element.</param>
/// <returns>True if it is legacy curtain element.</returns>
public static bool IsLegacyCurtainElement(Element element)
{
//for now, it is sufficient to check its category.
return(CategoryUtil.GetSafeCategoryId(element) == new ElementId(BuiltInCategory.OST_Curtain_Systems));
}
/// <summary>
/// Exports curtain object as container.
/// </summary>
/// <param name="allSubElements">
/// Collection of elements contained in the host curtain element.
/// </param>
/// <param name="wallElement">
/// The curtain wall element.
/// </param>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportCurtainObjectCommonAsContainer(ICollection <ElementId> allSubElements, Element wallElement,
ExporterIFC exporterIFC, ProductWrapper origWrapper, PlacementSetter currSetter)
{
if (wallElement == null)
{
return;
}
string overrideCADLayer = null;
ParameterUtil.GetStringValueFromElementOrSymbol(wallElement, "IFCCadLayer", out overrideCADLayer);
using (ExporterStateManager.CADLayerOverrideSetter layerSetter = new ExporterStateManager.CADLayerOverrideSetter(overrideCADLayer))
{
HashSet <ElementId> alreadyVisited = new HashSet <ElementId>(); // just in case.
Options geomOptions = GeometryUtil.GetIFCExportGeometryOptions();
{
foreach (ElementId subElemId in allSubElements)
{
using (ProductWrapper productWrapper = ProductWrapper.Create(origWrapper))
{
Element subElem = wallElement.Document.GetElement(subElemId);
if (subElem == null)
{
continue;
}
if (alreadyVisited.Contains(subElem.Id))
{
continue;
}
alreadyVisited.Add(subElem.Id);
// Respect element visibility settings.
if (!ElementFilteringUtil.CanExportElement(exporterIFC, subElem, false) || !ElementFilteringUtil.IsElementVisible(subElem))
{
continue;
}
GeometryElement geomElem = subElem.get_Geometry(geomOptions);
if (geomElem == null)
{
continue;
}
try
{
if (subElem is FamilyInstance)
{
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, subElem, out ifcEnumType);
if (subElem is Mullion)
{
if (ExporterCacheManager.ExportOptionsCache.ExportAs2x2)
{
ProxyElementExporter.Export(exporterIFC, subElem, geomElem, productWrapper);
}
else
{
IFCAnyHandle currLocalPlacement = currSetter.LocalPlacement;
if (exportType.ExportInstance == IFCEntityType.IfcCurtainWall)
{
// By default, panels and mullions are set to the same category as their parent. In this case,
// ask to get the exportType from the category id, since we don't want to inherit the parent class.
exportType.SetValueWithPair(IFCEntityType.IfcMemberType);
ifcEnumType = "MULLION";
}
FamilyInstanceExporter.ExportFamilyInstanceAsMappedItem(exporterIFC, subElem as Mullion, exportType, ifcEnumType, productWrapper,
ElementId.InvalidElementId, null, currLocalPlacement);
}
}
else
{
FamilyInstance subFamInst = subElem as FamilyInstance;
if (exportType.ExportInstance == IFCEntityType.IfcCurtainWall)
{
// By default, panels and mullions are set to the same category as their parent. In this case,
// ask to get the exportType from the category id, since we don't want to inherit the parent class.
ElementId catId = CategoryUtil.GetSafeCategoryId(subElem);
exportType = ElementFilteringUtil.GetExportTypeFromCategoryId(catId, out ifcEnumType);
}
if (ExporterCacheManager.ExportOptionsCache.ExportAs2x2)
{
if ((exportType.ExportInstance == IFCEntityType.UnKnown) ||
(exportType.ExportInstance == IFCEntityType.IfcPlate) ||
(exportType.ExportInstance == IFCEntityType.IfcMember))
{
exportType.SetValueWithPair(IFCEntityType.IfcBuildingElementProxy);
}
}
else
{
if (exportType.ExportInstance == IFCEntityType.UnKnown)
{
ifcEnumType = "CURTAIN_PANEL";
exportType.SetValueWithPair(IFCEntityType.IfcPlateType);
}
}
IFCAnyHandle currLocalPlacement = currSetter.LocalPlacement;
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
FamilyInstanceExporter.ExportFamilyInstanceAsMappedItem(exporterIFC, subFamInst, exportType, ifcEnumType, productWrapper,
ElementId.InvalidElementId, null, currLocalPlacement);
}
}
}
else if (subElem is CurtainGridLine)
{
ProxyElementExporter.Export(exporterIFC, subElem, geomElem, productWrapper);
}
else if (subElem is Wall)
{
WallExporter.ExportWall(exporterIFC, null, subElem, null, geomElem, productWrapper);
}
}
catch (Exception ex)
{
if (ExporterUtil.IsFatalException(wallElement.Document, ex))
{
throw ex;
}
continue;
}
}
}
}
}
}
/// <summary>
/// Export one IFCGrid in one level.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="levelId">The level ID.</param>
/// <param name="sameDirectionAxesU">The U axes of grids.</param>
/// <param name="sameDirectionAxesV">The V axes of grids.</param>
/// <param name="sameDirectionAxesW">The W axes of grids.</param>
public static void ExportGrid(ExporterIFC exporterIFC, ElementId levelId, string gridName, List <Grid> sameDirectionAxesU, List <Grid> sameDirectionAxesV, List <Grid> sameDirectionAxesW)
{
List <IFCAnyHandle> axesU = null;
List <IFCAnyHandle> axesV = null;
List <IFCAnyHandle> axesW = null;
List <IFCAnyHandle> representations = new List <IFCAnyHandle>();
using (ProductWrapper productWrapper = ProductWrapper.Create(exporterIFC, true))
{
IFCFile ifcFile = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(ifcFile))
{
GridRepresentationData gridRepresentationData = new GridRepresentationData();
axesU = CreateIFCGridAxisAndRepresentations(exporterIFC, productWrapper, sameDirectionAxesU, representations, gridRepresentationData);
axesV = CreateIFCGridAxisAndRepresentations(exporterIFC, productWrapper, sameDirectionAxesV, representations, gridRepresentationData);
if (sameDirectionAxesW != null)
{
axesW = CreateIFCGridAxisAndRepresentations(exporterIFC, productWrapper, sameDirectionAxesW, representations, gridRepresentationData);
}
IFCAnyHandle contextOfItemsFootPrint = exporterIFC.Get3DContextHandle("FootPrint");
string identifierOpt = "FootPrint";
string representationTypeOpt = "GeometricCurveSet";
int numGridsToExport = gridRepresentationData.m_Grids.Count;
if (numGridsToExport == 0)
{
return;
}
bool useIFCCADLayer = !string.IsNullOrWhiteSpace(gridRepresentationData.m_IFCCADLayer);
IFCAnyHandle shapeRepresentation = null;
HashSet <IFCAnyHandle> allCurves = new HashSet <IFCAnyHandle>();
for (int ii = 0; ii < numGridsToExport; ii++)
{
allCurves.UnionWith(gridRepresentationData.m_curveSets[ii]);
}
if (useIFCCADLayer)
{
shapeRepresentation = RepresentationUtil.CreateShapeRepresentation(exporterIFC, contextOfItemsFootPrint,
identifierOpt, representationTypeOpt, allCurves, gridRepresentationData.m_IFCCADLayer);
}
else
{
ElementId catId = CategoryUtil.GetSafeCategoryId(gridRepresentationData.m_Grids[0]);
shapeRepresentation = RepresentationUtil.CreateShapeRepresentation(exporterIFC, gridRepresentationData.m_Grids[0], catId,
contextOfItemsFootPrint, identifierOpt, representationTypeOpt, allCurves);
}
representations.Add(shapeRepresentation);
IFCAnyHandle productRep = IFCInstanceExporter.CreateProductDefinitionShape(ifcFile, null, null, representations);
// We will associate the grid with its level, unless there are no levels in the file, in which case we'll associate it with the building.
IFCLevelInfo levelInfo = ExporterCacheManager.LevelInfoCache.GetLevelInfo(exporterIFC, levelId);
bool useLevelInfo = (levelInfo != null);
string gridGUID = GUIDUtil.CreateGUID();
//// Get the first grid's override name, if cannot find it, use null.
//string gridName = GetGridName(sameDirectionAxesU, sameDirectionAxesV, sameDirectionAxesW);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle gridLevelHandle = useLevelInfo ? levelInfo.GetBuildingStorey() : ExporterCacheManager.BuildingHandle;
IFCAnyHandle levelObjectPlacement = IFCAnyHandleUtil.GetObjectPlacement(gridLevelHandle);
double elev = useLevelInfo ? levelInfo.Elevation : 0.0;
double elevation = UnitUtil.ScaleLength(elev);
XYZ orig = new XYZ(0.0, 0.0, elevation);
IFCAnyHandle copyLevelPlacement = ExporterUtil.CopyLocalPlacement(ifcFile, levelObjectPlacement);
IFCAnyHandle ifcGrid = IFCInstanceExporter.CreateGrid(exporterIFC, gridGUID, ownerHistory, gridName, copyLevelPlacement, productRep, axesU, axesV, axesW);
productWrapper.AddElement(null, ifcGrid, levelInfo, null, true, null);
transaction.Commit();
}
}
}
/// <summary>
/// Exports a ramp to IfcRamp, without decomposing into separate runs and landings.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="ifcEnumType">The ramp type.</param>
/// <param name="ramp">The ramp element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="numFlights">The number of flights for a multistory ramp.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportRamp(ExporterIFC exporterIFC, string ifcEnumType, Element ramp, GeometryElement geometryElement,
int numFlights, ProductWrapper productWrapper)
{
if (ramp == null || geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, ramp))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ecData.ReuseLocalPlacement = false;
GeometryElement rampGeom = GeometryUtil.GetOneLevelGeometryElement(geometryElement, numFlights);
BodyData bodyData;
ElementId categoryId = CategoryUtil.GetSafeCategoryId(ramp);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions();
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
ramp, categoryId, rampGeom, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return;
}
string containedRampGuid = GUIDUtil.CreateSubElementGUID(ramp, (int)IFCRampSubElements.ContainedRamp);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string rampName = NamingUtil.GetNameOverride(ramp, NamingUtil.GetIFCName(ramp));
string rampDescription = NamingUtil.GetDescriptionOverride(ramp, null);
string rampObjectType = NamingUtil.GetObjectTypeOverride(ramp, NamingUtil.CreateIFCObjectName(exporterIFC, ramp));
IFCAnyHandle containedRampLocalPlacement = ExporterUtil.CreateLocalPlacement(file, ecData.GetLocalPlacement(), null);
string elementTag = NamingUtil.GetTagOverride(ramp, NamingUtil.CreateIFCElementId(ramp));
string rampType = GetIFCRampType(ifcEnumType);
List <IFCAnyHandle> components = new List <IFCAnyHandle>();
IList <IFCExtrusionCreationData> componentExtrusionData = new List <IFCExtrusionCreationData>();
IFCAnyHandle containedRampHnd = IFCInstanceExporter.CreateRamp(file, containedRampGuid, ownerHistory, rampName,
rampDescription, rampObjectType, containedRampLocalPlacement, representation, elementTag, rampType);
components.Add(containedRampHnd);
componentExtrusionData.Add(ecData);
//productWrapper.AddElement(containedRampHnd, placementSetter.LevelInfo, ecData, false);
CategoryUtil.CreateMaterialAssociations(exporterIFC, containedRampHnd, bodyData.MaterialIds);
string guid = GUIDUtil.CreateGUID(ramp);
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
IFCAnyHandle rampHnd = IFCInstanceExporter.CreateRamp(file, guid, ownerHistory, rampName,
rampDescription, rampObjectType, localPlacement, null, elementTag, rampType);
productWrapper.AddElement(ramp, rampHnd, placementSetter.LevelInfo, ecData, true);
StairRampContainerInfo stairRampInfo = new StairRampContainerInfo(rampHnd, components, localPlacement);
ExporterCacheManager.StairRampContainerInfoCache.AddStairRampContainerInfo(ramp.Id, stairRampInfo);
ExportMultistoryRamp(exporterIFC, ramp, numFlights, rampHnd, components, componentExtrusionData, placementSetter,
productWrapper);
}
tr.Commit();
}
}
}
/// <summary>
/// Exports a CeilingAndFloor element to IFC.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
// export parts or not
bool exportParts = PartExporter.CanExportParts(floorElement);
if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
string ifcEnumType;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, floorElement, out ifcEnumType);
using (IFCTransaction tr = new IFCTransaction(file))
{
bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor));
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
// The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association.
// Disable calling ExportSlabAsExtrusion if we can't handle potential openings.
bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null;
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
Floor floor = floorElement as Floor;
// First, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
if (solids.Count == 1 && meshes.Count == 0)
{
bool completelyClipped;
// floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go thruough te Revit model orgigin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorPlane = new Plane(floorDir, floorOrigin);
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement,
catId, solids[0], extrusionAnalyzerFloorPlane, floorExtrusionDirection, null, out completelyClipped);
if (completelyClipped)
{
return;
}
if (floorAndProperties.Handle != null)
{
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(floorAndProperties.Handle);
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
repTypes.Add(ShapeRepresentationType.SweptSolid);
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0 && canExportAsInternalExtrusion)
{
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
}
}
if (prodReps.Count == 0)
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
IFCAnyHandle prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
string entityType = null;
switch (exportType)
{
case IFCExportType.IfcFooting:
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCFootingType>(floorElement, ifcEnumType, null);
}
else
{
entityType = IFCValidateEntry.GetValidIFCType <IFCFootingType>(floorElement, ifcEnumType, null);
}
break;
case IFCExportType.IfcCovering:
entityType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING");
break;
case IFCExportType.IfcRamp:
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCRampType>(floorElement, ifcEnumType, null);
}
else
{
entityType = IFCValidateEntry.GetValidIFCType <IFCRampType>(floorElement, ifcEnumType, null);
}
break;
default:
bool isBaseSlab = false;
AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel();
if (analyticalModel != null)
{
AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs();
isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat);
}
entityType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR");
break;
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string ifcDescription = NamingUtil.GetDescriptionOverride(floorElement, null);
string ifcObjectType = NamingUtil.GetObjectTypeOverride(floorElement, exporterIFC.GetFamilyName());
string ifcTag = NamingUtil.GetTagOverride(floorElement, NamingUtil.CreateIFCElementId(floorElement));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
// TODO: replace with CreateGenericBuildingElement.
switch (exportType)
{
case IFCExportType.IfcFooting:
slabHnd = IFCInstanceExporter.CreateFooting(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
case IFCExportType.IfcCovering:
slabHnd = IFCInstanceExporter.CreateCovering(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
case IFCExportType.IfcRamp:
slabHnd = IFCInstanceExporter.CreateRamp(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
default:
slabHnd = IFCInstanceExporter.CreateSlab(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
slabHnds.Add(slabHnd);
if (!exportParts)
{
if (repTypes[ii] == ShapeRepresentationType.Brep)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true);
}
// This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not
// controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View
if (exportedAsInternalExtrusion)
{
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
}
}
if (!exportParts)
{
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true);
}
}
}
tr.Commit();
return;
}
}
/// <summary>
/// Exports an element to IFC footing.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="element">
/// The element.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="ifcEnumType">
/// The string value represents the IFC type.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportFooting(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
string ifcEnumType, ProductWrapper productWrapper)
{
// export parts or not
bool exportParts = PartExporter.CanExportParts(element);
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(setter.LocalPlacement);
IFCAnyHandle prodRep = null;
ElementId matId = ElementId.InvalidElementId;
if (!exportParts)
{
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
element, catId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
string instanceGUID = GUIDUtil.CreateGUID(element);
string instanceName = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element));
string instanceDescription = NamingUtil.GetDescriptionOverride(element, null);
string instanceObjectType = NamingUtil.GetObjectTypeOverride(element, exporterIFC.GetFamilyName());
string instanceTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
string footingType = GetIFCFootingType(ifcEnumType); // need to keep it for legacy support when original data follows slightly diff naming
footingType = IFCValidateEntry.GetValidIFCType(element, footingType);
IFCAnyHandle footing = IFCInstanceExporter.CreateFooting(file, instanceGUID, exporterIFC.GetOwnerHistoryHandle(),
instanceName, instanceDescription, instanceObjectType, ecData.GetLocalPlacement(), prodRep, instanceTag, footingType);
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, element, footing, productWrapper, setter, setter.LocalPlacement, null);
}
else
{
if (matId != ElementId.InvalidElementId)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, footing, matId);
}
}
productWrapper.AddElement(element, footing, setter, ecData, true);
OpeningUtil.CreateOpeningsIfNecessary(footing, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
tr.Commit();
}
}
/// <summary>
/// Exports a CeilingAndFloor element to IFC.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
// export parts or not
bool exportParts = PartExporter.CanExportParts(floorElement);
if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, floorElement, out ifcEnumType);
IFCAnyHandle type = null;
MaterialLayerSetInfo layersetInfo = null;
if (!ElementFilteringUtil.IsElementVisible(floorElement))
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportInstance.ToString(), out elementClassTypeEnum) ||
Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
Document doc = floorElement.Document;
using (SubTransaction tempPartTransaction = new SubTransaction(doc))
{
// For IFC4RV export, Floor will be split into its parts(temporarily) in order to export the floor by its parts
bool exportByComponents = ExporterUtil.ShouldExportByComponents(floorElement, exportParts);
using (IFCTransaction tr = new IFCTransaction(file))
{
bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor));
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
// Try to export the Floor slab as a container. If that succeeds, we are done.
// If we do export the floor as a container, it will take care of the local placement and transform there, so we need to leave
// this out of the IFCTransformSetter and PlacementSetter scopes below, or else we'll get double transforms.
IFCAnyHandle floorHnd = RoofExporter.ExportRoofOrFloorAsContainer(exporterIFC, floorElement, geometryElement, productWrapper);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(floorHnd))
{
tr.Commit();
return;
}
}
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, floorElement, out overrideContainerHnd);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
// The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association.
// Disable calling ExportSlabAsExtrusion if we can't handle potential openings.
bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null;
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
Floor floor = floorElement as Floor;
// Next, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(floorElement.Document, exporterIFC, ref solids, ref meshes);
if (solids.Count == 1 && meshes.Count == 0)
{
bool completelyClipped;
// floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go through the Revit model origin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorBasePlane = GeometryUtil.CreatePlaneByNormalAtOrigin(floorDir);
GenerateAdditionalInfo additionalInfo = GenerateAdditionalInfo.GenerateBody;
additionalInfo |= ExporterCacheManager.ExportOptionsCache.ExportAs4 ?
GenerateAdditionalInfo.GenerateFootprint : GenerateAdditionalInfo.None;
// Skip generate body item for IFC4RV. It will be handled later in PartExporter.ExportHostPartAsShapeAspects()
if (exportByComponents)
{
additionalInfo &= ~GenerateAdditionalInfo.GenerateBody;
}
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement,
catId, solids[0], extrusionAnalyzerFloorBasePlane, floorOrigin, floorExtrusionDirection, null, out completelyClipped,
addInfo: additionalInfo);
if (completelyClipped)
{
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
if (floorAndProperties.Handle != null)
{
representations.Add(floorAndProperties.Handle);
repTypes.Add(ShapeRepresentationType.SweptSolid);
}
// Footprint representation will only be exported in export to IFC4
if (((additionalInfo & GenerateAdditionalInfo.GenerateFootprint) != 0) && (floorAndProperties.FootprintInfo != null))
{
IFCAnyHandle footprintShapeRep = floorAndProperties.FootprintInfo.CreateFootprintShapeRepresentation(exporterIFC);
representations.Add(footprintShapeRep);
}
if (exportByComponents)
{
IFCAnyHandle prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, representations);
prodReps.Add(prodRep);
}
else if (representations.Count > 0 && floorAndProperties.Handle != null) // Only when at least the body rep exists will come here
{
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
}
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0 && canExportAsInternalExtrusion && !exportByComponents)
{
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
PotentiallyFixPresentationLayerAssignment(floorElement, prodReps);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
// Footprint representation will only be exported in export to IFC4
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
if (extrusionLoops.Count > ii)
{
if (extrusionLoops[ii].Count > 0)
{
// Get the extrusion footprint using the first Curveloop. Transform needs to be obtained from the returned local placement
Transform lcs = ExporterIFCUtils.GetUnscaledTransform(exporterIFC, localPlacements[ii]);
IFCAnyHandle footprintGeomRepItem = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, extrusionLoops[ii][0], lcs, floorPlane.Normal);
IFCAnyHandle contextOfItemsFootprint = exporterIFC.Get3DContextHandle("FootPrint");
ISet <IFCAnyHandle> repItem = new HashSet <IFCAnyHandle>();
repItem.Add(footprintGeomRepItem);
IFCAnyHandle footprintShapeRepresentation = RepresentationUtil.CreateBaseShapeRepresentation(exporterIFC, contextOfItemsFootprint, "FootPrint", "Curve2D", repItem);
IList <IFCAnyHandle> reps = new List <IFCAnyHandle>();
reps.Add(footprintShapeRepresentation);
IFCAnyHandleUtil.AddRepresentations(prodReps[ii], reps);
}
}
}
}
}
IFCAnyHandle prodDefHnd;
if (prodReps.Count == 0)
{
if (exportByComponents)
{
prodDefHnd = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, null);
prodReps.Add(prodDefHnd);
}
else
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// Brep representation using tesellation after ExportSlabAsExtrusion does not return prodReps
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
// Deal with a couple of cases that have non-standard defaults.
switch (exportType.ExportInstance)
{
case IFCEntityType.IfcCovering:
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING");
break;
case IFCEntityType.IfcSlab:
bool isBaseSlab = false;
AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel();
if (analyticalModel != null)
{
AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs();
isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat);
}
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR");
break;
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
slabHnd = IFCInstanceExporter.CreateGenericIFCEntity(exportType, exporterIFC, floorElement, currentGUID, ownerHistory,
localPlacementHnd, exportParts ? null : prodReps[ii]);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (!string.IsNullOrEmpty(ifcName))
{
IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, ifcName);
}
// Pre IFC4 Slab does not have PredefinedType
if (!string.IsNullOrEmpty(exportType.ValidatedPredefinedType) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
IFCAnyHandleUtil.SetAttribute(slabHnd, "PredefinedType", exportType.ValidatedPredefinedType, true);
}
if (exportParts && !ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
else if (exportByComponents)
{
IFCExtrusionCreationData partECData = new IFCExtrusionCreationData();
IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, floorElement, prodReps[ii],
productWrapper, placementSetter, localPlacement, ElementId.InvalidElementId, out layersetInfo, partECData);
loopExtraParams.Add(partECData);
}
slabHnds.Add(slabHnd);
// For IFC4RV, export of the geometry is already handled in PartExporter.ExportHostPartAsShapeAspects()
if (!exportParts && !exportByComponents)
{
if (repTypes[ii] == ShapeRepresentationType.Brep || repTypes[ii] == ShapeRepresentationType.Tessellation)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true, exportType);
type = ExporterUtil.CreateGenericTypeFromElement(floorElement, exportType, file, ownerHistory, exportType.ValidatedPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(type, slabHnds[ii]);
ExporterUtil.AddIntoComplexPropertyCache(slabHnds[ii], layersetInfo);
}
// This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not
// controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View
if (exportedAsInternalExtrusion)
{
ISet <IFCAnyHandle> oldCreatedObjects = productWrapper.GetAllObjects();
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
ISet <IFCAnyHandle> newCreatedObjects = productWrapper.GetAllObjects();
newCreatedObjects.ExceptWith(oldCreatedObjects);
PotentiallyFixPresentationLayerAssignment(floorElement, newCreatedObjects);
}
}
if (!exportParts)
{
if (ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, productWrapper.GetAnElement(),
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
else
{
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true, type);
}
}
}
}
tr.Commit();
return;
}
}
}
/// <summary>
/// Export the individual part (IfcBuildingElementPart).
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The part element to export.</param>
/// <param name="geometryElement">The geometry of part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
public static void ExportPart(ExporterIFC exporterIFC, Element partElement, ProductWrapper productWrapper,
PlacementSetter placementSetter, IFCAnyHandle originalPlacement, IFCRange range, IFCExtrusionAxes ifcExtrusionAxes,
Element hostElement, ElementId overrideLevelId, bool asBuildingElement)
{
if (!ElementFilteringUtil.IsElementVisible(partElement))
{
return;
}
Part part = partElement as Part;
if (part == null)
{
return;
}
if (!asBuildingElement)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcBuildingElementPart", out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
}
else
{
string ifcEnumType = null;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
}
PlacementSetter standalonePlacementSetter = null;
bool standaloneExport = hostElement == null && !asBuildingElement;
ElementId partExportLevel = null;
if (standaloneExport || asBuildingElement)
{
partExportLevel = partElement.LevelId;
}
else
{
if (part.OriginalCategoryId != hostElement.Category.Id)
{
return;
}
partExportLevel = hostElement.LevelId;
}
if (overrideLevelId != null)
{
partExportLevel = overrideLevelId;
}
if (ExporterCacheManager.PartExportedCache.HasExported(partElement.Id, partExportLevel))
{
return;
}
Options options = GeometryUtil.GetIFCExportGeometryOptions();
View ownerView = partElement.Document.GetElement(partElement.OwnerViewId) as View;
if (ownerView != null)
{
options.View = ownerView;
}
GeometryElement geometryElement = partElement.get_Geometry(options);
if (geometryElement == null)
{
return;
}
try
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IFCAnyHandle partPlacement = null;
if (standaloneExport || asBuildingElement)
{
Transform orientationTrf = Transform.Identity;
standalonePlacementSetter = PlacementSetter.Create(exporterIFC, partElement, null, orientationTrf, partExportLevel);
partPlacement = standalonePlacementSetter.LocalPlacement;
}
else
{
partPlacement = ExporterUtil.CreateLocalPlacement(file, originalPlacement, null);
}
bool validRange = (range != null && !MathUtil.IsAlmostZero(range.Start - range.End));
SolidMeshGeometryInfo solidMeshInfo;
if (validRange)
{
solidMeshInfo = GeometryUtil.GetSplitClippedSolidMeshGeometry(geometryElement, range);
if (solidMeshInfo.GetSolids().Count == 0 && solidMeshInfo.GetMeshes().Count == 0)
{
return;
}
}
else
{
solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
}
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(partPlacement);
extrusionCreationData.ReuseLocalPlacement = false;
extrusionCreationData.PossibleExtrusionAxes = ifcExtrusionAxes;
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
ElementId catId = CategoryUtil.GetSafeCategoryId(partElement);
ElementId hostCatId = CategoryUtil.GetSafeCategoryId(hostElement);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, solids, meshes,
bodyExporterOptions, extrusionCreationData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, geomlist,
bodyExporterOptions, extrusionCreationData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
extrusionCreationData.ClearOpenings();
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string partGUID = GUIDUtil.CreateGUID(partElement);
string partName = NamingUtil.GetNameOverride(partElement, NamingUtil.GetIFCName(partElement));
string partDescription = NamingUtil.GetDescriptionOverride(partElement, null);
string partObjectType = NamingUtil.GetObjectTypeOverride(partElement, NamingUtil.CreateIFCObjectName(exporterIFC, partElement));
string partTag = NamingUtil.GetTagOverride(partElement, NamingUtil.CreateIFCElementId(partElement));
IFCAnyHandle ifcPart = null;
if (!asBuildingElement)
{
ifcPart = IFCInstanceExporter.CreateBuildingElementPart(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag);
}
else
{
string ifcEnumType = null;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
string defaultValue = null;
// This replicates old functionality before IFC4 addition, where the default for slab was "FLOOR".
// Really the export layer table should be fixed for this case.
if (string.IsNullOrWhiteSpace(ifcEnumType) && hostCatId == new ElementId(BuiltInCategory.OST_Floors))
{
ifcEnumType = "FLOOR";
}
ifcEnumType = IFCValidateEntry.GetValidIFCType(hostElement, ifcEnumType, defaultValue);
switch (exportType)
{
case IFCExportType.IfcColumnType:
ifcPart = IFCInstanceExporter.CreateColumn(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcCovering:
ifcPart = IFCInstanceExporter.CreateCovering(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcFooting:
ifcPart = IFCInstanceExporter.CreateFooting(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcPile:
ifcPart = IFCInstanceExporter.CreatePile(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType, null);
break;
case IFCExportType.IfcRoof:
ifcPart = IFCInstanceExporter.CreateRoof(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcSlab:
ifcPart = IFCInstanceExporter.CreateSlab(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcWall:
ifcPart = IFCInstanceExporter.CreateWall(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
default:
ifcPart = IFCInstanceExporter.CreateBuildingElementProxy(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, null);
break;
}
}
bool containedInLevel = (standaloneExport || asBuildingElement);
PlacementSetter whichPlacementSetter = containedInLevel ? standalonePlacementSetter : placementSetter;
productWrapper.AddElement(partElement, ifcPart, whichPlacementSetter, extrusionCreationData, containedInLevel);
OpeningUtil.CreateOpeningsIfNecessary(ifcPart, partElement, extrusionCreationData, bodyData.OffsetTransform, exporterIFC,
extrusionCreationData.GetLocalPlacement(), whichPlacementSetter, productWrapper);
//Add the exported part to exported cache.
TraceExportedParts(partElement, partExportLevel, standaloneExport || asBuildingElement ? ElementId.InvalidElementId : hostElement.Id);
CategoryUtil.CreateMaterialAssociation(exporterIFC, ifcPart, bodyData.MaterialIds);
transaction.Commit();
}
}
}
finally
{
if (standalonePlacementSetter != null)
{
standalonePlacementSetter.Dispose();
}
}
}
/// <summary>
/// Exports an element as IFC covering.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element to be exported.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCovering(ExporterIFC exporterIFC, Element element, GeometryElement geomElem, string ifcEnumType, ProductWrapper productWrapper)
{
bool exportParts = PartExporter.CanExportParts(element);
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcCovering", out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
ElementType elemType = element.Document.GetElement(element.GetTypeId()) as ElementType;
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
IFCAnyHandle prodRep = null;
if (!exportParts)
{
ecData.SetLocalPlacement(setter.LocalPlacement);
ecData.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geomElem, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
// We will use the category of the element to set a default value for the covering.
string defaultCoveringEnumType = null;
if (categoryId == new ElementId(BuiltInCategory.OST_Ceilings))
{
defaultCoveringEnumType = "CEILING";
}
else if (categoryId == new ElementId(BuiltInCategory.OST_Floors))
{
defaultCoveringEnumType = "FLOORING";
}
else if (categoryId == new ElementId(BuiltInCategory.OST_Roofs))
{
defaultCoveringEnumType = "ROOFING";
}
string instanceGUID = GUIDUtil.CreateGUID(element);
string instanceName = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element));
string instanceDescription = NamingUtil.GetDescriptionOverride(element, null);
string instanceObjectType = NamingUtil.GetObjectTypeOverride(element, exporterIFC.GetFamilyName());
string instanceTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
string coveringType = IFCValidateEntry.GetValidIFCType(element, ifcEnumType, defaultCoveringEnumType);
IFCAnyHandle covering = IFCInstanceExporter.CreateCovering(file, instanceGUID, ExporterCacheManager.OwnerHistoryHandle,
instanceName, instanceDescription, instanceObjectType, setter.LocalPlacement, prodRep, instanceTag, coveringType);
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, element, covering, productWrapper, setter, setter.LocalPlacement, null);
}
bool containInSpace = false;
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
// Ceiling containment in Space is generally required and not specific to any view
if (ExporterCacheManager.CeilingSpaceRelCache.ContainsKey(element.Id))
{
IList <ElementId> roomlist = ExporterCacheManager.CeilingSpaceRelCache[element.Id];
// Process Ceiling to be contained in a Space only when it is exactly bounding one Space
if (roomlist.Count == 1)
{
productWrapper.AddElement(element, covering, setter, null, false);
// Modify the Ceiling placement to be relative to the Space that it bounds
IFCAnyHandle roomPlacement = IFCAnyHandleUtil.GetObjectPlacement(ExporterCacheManager.SpaceInfoCache.FindSpaceHandle(roomlist[0]));
Transform relTrf = ExporterIFCUtils.GetRelativeLocalPlacementOffsetTransform(roomPlacement, localPlacementToUse);
Transform inverseTrf = relTrf.Inverse;
IFCAnyHandle relLocalPlacement = ExporterUtil.CreateAxis2Placement3D(file, inverseTrf.Origin, inverseTrf.BasisZ, inverseTrf.BasisX);
IFCAnyHandleUtil.SetAttribute(localPlacementToUse, "PlacementRelTo", roomPlacement);
GeometryUtil.SetRelativePlacement(localPlacementToUse, relLocalPlacement);
ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomlist[0], covering);
containInSpace = true;
}
}
// if not contained in Space, assign it to default containment in Level
if (!containInSpace)
{
productWrapper.AddElement(element, covering, setter, null, true);
}
if (!exportParts)
{
Ceiling ceiling = element as Ceiling;
if (ceiling != null)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, ceiling, covering,
geomElem, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, null);
}
else
{
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geomElem, exporterIFC, element);
CategoryUtil.CreateMaterialAssociation(exporterIFC, covering, matId);
}
}
OpeningUtil.CreateOpeningsIfNecessary(covering, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
transaction.Commit();
}
}
/// <summary>
/// Exports a MEP family instance.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="element">
/// The element.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="productWrapper">
/// The IFCProductWrapper.
/// </param>
public static void Export(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, IFCProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
string ifcEnumType;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, element, out ifcEnumType);
using (IFCPlacementSetter setter = IFCPlacementSetter.Create(exporterIFC, element))
{
IFCAnyHandle localPlacementToUse = setter.GetPlacement();
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
IFCAnyHandle productRepresentation = RepresentationUtil.CreateBRepProductDefinitionShape(element.Document.Application,
exporterIFC, element, catId, geometryElement, bodyExporterOptions, null, extraParams);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(productRepresentation))
{
extraParams.ClearOpenings();
return;
}
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
ElementId typeId = element.GetTypeId();
ElementType type = element.Document.GetElement(typeId) as ElementType;
FamilyTypeInfo currentTypeInfo = ExporterCacheManager.TypeObjectsCache.Find(typeId, false);
bool found = currentTypeInfo.IsValid();
if (!found)
{
string typeGUID = ExporterIFCUtils.CreateGUID(type);
string origTypeName = exporterIFC.GetName();
string typeName = NamingUtil.GetNameOverride(type, origTypeName);
string typeObjectType = NamingUtil.CreateIFCObjectName(exporterIFC, type);
string applicableOccurance = NamingUtil.GetObjectTypeOverride(type, typeObjectType);
string typeDescription = NamingUtil.GetDescriptionOverride(type, null);
string typeElemId = NamingUtil.CreateIFCElementId(type);
HashSet <IFCAnyHandle> propertySetsOpt = new HashSet <IFCAnyHandle>();
IList <IFCAnyHandle> repMapListOpt = new List <IFCAnyHandle>();
IFCAnyHandle styleHandle = FamilyExporterUtil.ExportGenericType(file, exportType, ifcEnumType, typeGUID, ownerHistory, typeName,
typeDescription, applicableOccurance, propertySetsOpt, repMapListOpt, typeElemId, typeName, element, type);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
currentTypeInfo.Style = styleHandle;
ExporterCacheManager.TypeObjectsCache.Register(typeId, false, currentTypeInfo);
}
}
string instanceGUID = ExporterIFCUtils.CreateGUID(element);
string origInstanceName = exporterIFC.GetName();
string instanceName = NamingUtil.GetNameOverride(element, origInstanceName);
string objectType = NamingUtil.CreateIFCObjectName(exporterIFC, element);
string instanceObjectType = NamingUtil.GetObjectTypeOverride(element, objectType);
string instanceDescription = NamingUtil.GetDescriptionOverride(element, null);
string instanceElemId = NamingUtil.CreateIFCElementId(element);
bool roomRelated = !FamilyExporterUtil.IsDistributionFlowElementSubType(exportType);
ElementId roomId = ElementId.InvalidElementId;
if (roomRelated)
{
roomId = setter.UpdateRoomRelativeCoordinates(element, out localPlacementToUse);
}
IFCAnyHandle instanceHandle = null;
if (FamilyExporterUtil.IsFurnishingElementSubType(exportType))
{
instanceHandle = IFCInstanceExporter.CreateFurnishingElement(file, instanceGUID, ownerHistory,
instanceName, instanceDescription, instanceObjectType, localPlacementToUse, productRepresentation, instanceElemId);
}
else if (FamilyExporterUtil.IsDistributionFlowElementSubType(exportType))
{
instanceHandle = IFCInstanceExporter.CreateDistributionFlowElement(file, instanceGUID, ownerHistory,
instanceName, instanceDescription, instanceObjectType, localPlacementToUse, productRepresentation, instanceElemId);
}
else if (FamilyExporterUtil.IsEnergyConversionDeviceSubType(exportType))
{
instanceHandle = IFCInstanceExporter.CreateEnergyConversionDevice(file, instanceGUID, ownerHistory,
instanceName, instanceDescription, instanceObjectType, localPlacementToUse, productRepresentation, instanceElemId);
}
else if (FamilyExporterUtil.IsFlowFittingSubType(exportType))
{
instanceHandle = IFCInstanceExporter.CreateFlowFitting(file, instanceGUID, ownerHistory,
instanceName, instanceDescription, instanceObjectType, localPlacementToUse, productRepresentation, instanceElemId);
}
else if (FamilyExporterUtil.IsFlowMovingDeviceSubType(exportType))
{
instanceHandle = IFCInstanceExporter.CreateFlowMovingDevice(file, instanceGUID, ownerHistory,
instanceName, instanceDescription, instanceObjectType, localPlacementToUse, productRepresentation, instanceElemId);
}
else if (FamilyExporterUtil.IsFlowSegmentSubType(exportType))
{
instanceHandle = IFCInstanceExporter.CreateFlowSegment(file, instanceGUID, ownerHistory,
instanceName, instanceDescription, instanceObjectType, localPlacementToUse, productRepresentation, instanceElemId);
}
else if (FamilyExporterUtil.IsFlowStorageDeviceSubType(exportType))
{
instanceHandle = IFCInstanceExporter.CreateFlowStorageDevice(file, instanceGUID, ownerHistory,
instanceName, instanceDescription, instanceObjectType, localPlacementToUse, productRepresentation, instanceElemId);
}
else if (FamilyExporterUtil.IsFlowTerminalSubType(exportType))
{
instanceHandle = IFCInstanceExporter.CreateFlowTerminal(file, instanceGUID, ownerHistory,
instanceName, instanceDescription, instanceObjectType, localPlacementToUse, productRepresentation, instanceElemId);
}
else if (FamilyExporterUtil.IsFlowTreatmentDeviceSubType(exportType))
{
instanceHandle = IFCInstanceExporter.CreateFlowTreatmentDevice(file, instanceGUID, ownerHistory,
instanceName, instanceDescription, instanceObjectType, localPlacementToUse, productRepresentation, instanceElemId);
}
else if (FamilyExporterUtil.IsFlowControllerSubType(exportType))
{
instanceHandle = IFCInstanceExporter.CreateFlowController(file, instanceGUID, ownerHistory,
instanceName, instanceDescription, instanceObjectType, localPlacementToUse, productRepresentation, instanceElemId);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(instanceHandle))
{
return;
}
if (roomId != ElementId.InvalidElementId)
{
exporterIFC.RelateSpatialElement(roomId, instanceHandle);
productWrapper.AddElement(instanceHandle, setter, extraParams, false);
}
else
{
productWrapper.AddElement(instanceHandle, setter, extraParams, LevelUtil.AssociateElementToLevel(element));
}
OpeningUtil.CreateOpeningsIfNecessary(instanceHandle, element, extraParams, exporterIFC, localPlacementToUse, setter, productWrapper);
if (currentTypeInfo.IsValid())
{
ExporterCacheManager.TypeRelationsCache.Add(currentTypeInfo.Style, instanceHandle);
}
PropertyUtil.CreateInternalRevitPropertySets(exporterIFC, element, productWrapper);
ExporterCacheManager.MEPCache.Register(element, instanceHandle);
tr.Commit();
}
}
}
}
/// <summary>
/// Exports a roof or floor as a container of multiple roof slabs. Returns the handle, if successful.
/// </summary>
/// <param name="exporterIFC">The exporter.</param>
/// <param name="ifcEnumType">The roof type.</param>
/// <param name="element">The roof or floor element.</param>
/// <param name="geometry">The geometry of the element.</param>
/// <param name="productWrapper">The product wrapper.</param>
/// <returns>The roof handle.</returns>
/// <remarks>For floors, if there is only one component, return null, as we do not want to create a container.</remarks>
public static IFCAnyHandle ExportRoofOrFloorAsContainer(ExporterIFC exporterIFC, string ifcEnumType, Element element, GeometryElement geometry, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
// We support ExtrusionRoofs, FootPrintRoofs, and Floors only.
bool elementIsRoof = (element is ExtrusionRoof) || (element is FootPrintRoof);
bool elementIsFloor = (element is Floor);
if (!elementIsRoof && !elementIsFloor)
{
return(null);
}
using (IFCTransaction transaction = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
IFCAnyHandle localPlacement = setter.LocalPlacement;
IList <HostObjectSubcomponentInfo> hostObjectSubcomponents = null;
try
{
hostObjectSubcomponents = ExporterIFCUtils.ComputeSubcomponents(element as HostObject);
}
catch
{
return(null);
}
if (hostObjectSubcomponents == null)
{
return(null);
}
int numSubcomponents = hostObjectSubcomponents.Count;
if (numSubcomponents == 0 || (elementIsFloor && numSubcomponents == 1))
{
return(null);
}
try
{
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
extrusionCreationData.SetLocalPlacement(localPlacement);
extrusionCreationData.ReuseLocalPlacement = true;
using (TransformSetter trfSetter = TransformSetter.Create())
{
IList <GeometryObject> geometryList = new List <GeometryObject>();
geometryList.Add(geometry);
trfSetter.InitializeFromBoundingBox(exporterIFC, geometryList, extrusionCreationData);
IFCAnyHandle prodRepHnd = null;
string elementGUID = GUIDUtil.CreateGUID(element);
string elementName = NamingUtil.GetIFCName(element);
string elementDescription = NamingUtil.GetDescriptionOverride(element, null);
string elementObjectType = NamingUtil.GetObjectTypeOverride(element, exporterIFC.GetFamilyName());
string elementId = NamingUtil.CreateIFCElementId(element);
string hostObjectType = IFCValidateEntry.GetValidIFCType(element, ifcEnumType);
IFCAnyHandle hostObjectHandle = null;
if (elementIsRoof)
{
hostObjectHandle = IFCInstanceExporter.CreateRoof(file, elementGUID, ownerHistory, elementName, elementDescription,
elementObjectType, localPlacement, prodRepHnd, elementId, hostObjectType);
}
else
{
hostObjectHandle = IFCInstanceExporter.CreateSlab(file, elementGUID, ownerHistory, elementName, elementDescription,
elementObjectType, localPlacement, prodRepHnd, elementId, hostObjectType);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(hostObjectHandle))
{
return(null);
}
IList <IFCAnyHandle> elementHandles = new List <IFCAnyHandle>();
elementHandles.Add(hostObjectHandle);
// If element is floor, then the profile curve loop of hostObjectSubComponent is computed from the top face of the floor
// else if element is roof, then the profile curve loop is taken from the bottom face of the roof instead
XYZ extrusionDir = elementIsFloor ? new XYZ(0, 0, -1) : new XYZ(0, 0, 1);
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
IList <IFCAnyHandle> slabHandles = new List <IFCAnyHandle>();
IList <CurveLoop> hostObjectOpeningLoops = new List <CurveLoop>();
double maximumScaledDepth = 0.0;
using (IFCExtrusionCreationData slabExtrusionCreationData = new IFCExtrusionCreationData())
{
slabExtrusionCreationData.SetLocalPlacement(extrusionCreationData.GetLocalPlacement());
slabExtrusionCreationData.ReuseLocalPlacement = false;
slabExtrusionCreationData.ForceOffset = true;
int loopNum = 0;
int subElementStart = elementIsRoof ? (int)IFCRoofSubElements.RoofSlabStart : (int)IFCSlabSubElements.SubSlabStart;
string subSlabType = elementIsRoof ? "ROOF" : hostObjectType;
foreach (HostObjectSubcomponentInfo hostObjectSubcomponent in hostObjectSubcomponents)
{
trfSetter.InitializeFromBoundingBox(exporterIFC, geometryList, slabExtrusionCreationData);
Plane plane = hostObjectSubcomponent.GetPlane();
Transform lcs = GeometryUtil.CreateTransformFromPlane(plane);
IList <CurveLoop> curveLoops = new List <CurveLoop>();
CurveLoop slabCurveLoop = hostObjectSubcomponent.GetCurveLoop();
curveLoops.Add(slabCurveLoop);
double slope = Math.Abs(plane.Normal.Z);
double scaledDepth = UnitUtil.ScaleLength(hostObjectSubcomponent.Depth);
double scaledExtrusionDepth = scaledDepth * slope;
IFCAnyHandle shapeRep = ExtrusionExporter.CreateExtrudedSolidFromCurveLoop(exporterIFC, null, curveLoops, lcs, extrusionDir, scaledExtrusionDepth, false);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(shapeRep))
{
return(null);
}
ElementId matId = HostObjectExporter.GetFirstLayerMaterialId(element as HostObject);
BodyExporter.CreateSurfaceStyleForRepItem(exporterIFC, element.Document, shapeRep, matId);
HashSet <IFCAnyHandle> bodyItems = new HashSet <IFCAnyHandle>();
bodyItems.Add(shapeRep);
shapeRep = RepresentationUtil.CreateSweptSolidRep(exporterIFC, element, catId, exporterIFC.Get3DContextHandle("Body"), bodyItems, null);
IList <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>();
shapeReps.Add(shapeRep);
IFCAnyHandle repHnd = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps);
// Allow support for up to 256 named IfcSlab components, as defined in IFCSubElementEnums.cs.
string slabGUID = (loopNum < 256) ? GUIDUtil.CreateSubElementGUID(element, subElementStart + loopNum) : GUIDUtil.CreateGUID();
IFCAnyHandle slabPlacement = ExporterUtil.CreateLocalPlacement(file, slabExtrusionCreationData.GetLocalPlacement(), null);
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(file, slabGUID, ownerHistory, elementName,
elementDescription, elementObjectType, slabPlacement, repHnd, elementId, subSlabType);
//slab quantities
slabExtrusionCreationData.ScaledLength = scaledExtrusionDepth;
slabExtrusionCreationData.ScaledArea = UnitUtil.ScaleArea(UnitUtil.ScaleArea(hostObjectSubcomponent.AreaOfCurveLoop));
slabExtrusionCreationData.ScaledOuterPerimeter = UnitUtil.ScaleLength(curveLoops[0].GetExactLength());
slabExtrusionCreationData.Slope = UnitUtil.ScaleAngle(MathUtil.SafeAcos(Math.Abs(slope)));
productWrapper.AddElement(null, slabHnd, setter, slabExtrusionCreationData, false);
elementHandles.Add(slabHnd);
slabHandles.Add(slabHnd);
hostObjectOpeningLoops.Add(slabCurveLoop);
maximumScaledDepth = Math.Max(maximumScaledDepth, scaledDepth);
loopNum++;
}
}
productWrapper.AddElement(element, hostObjectHandle, setter, extrusionCreationData, true);
ExporterUtil.RelateObjects(exporterIFC, null, hostObjectHandle, slabHandles);
OpeningUtil.AddOpeningsToElement(exporterIFC, elementHandles, hostObjectOpeningLoops, element, null, maximumScaledDepth,
null, setter, localPlacement, productWrapper);
transaction.Commit();
return(hostObjectHandle);
}
}
}
finally
{
exporterIFC.ClearFaceWithElementHandleMap();
}
}
}
}
/// <summary>
/// Exports a generic element as an IfcSlab.</summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="ifcEnumType">The string value represents the IFC type.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if the floor is exported successfully, false otherwise.</returns>
public static void ExportGenericSlab(ExporterIFC exporterIFC, Element slabElement, GeometryElement geometryElement, string ifcEnumType,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, slabElement))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
bool exportParts = PartExporter.CanExportParts(slabElement);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
IFCAnyHandle prodDefHnd = null;
bool isBRepSlabHnd = false;
if (!exportParts)
{
ecData.SetLocalPlacement(localPlacement);
ElementId catId = CategoryUtil.GetSafeCategoryId(slabElement);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
slabElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
isBRepSlabHnd = (bodyData.ShapeRepresentationType == ShapeRepresentationType.Brep);
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(slabElement);
string entityType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(slabElement, ifcEnumType, "FLOOR");
string ifcName = NamingUtil.GetNameOverride(slabElement, NamingUtil.GetIFCName(slabElement));
string ifcDescription = NamingUtil.GetDescriptionOverride(slabElement, null);
string ifcObjectType = NamingUtil.GetObjectTypeOverride(slabElement, exporterIFC.GetFamilyName());
string ifcTag = NamingUtil.GetTagOverride(slabElement, NamingUtil.CreateIFCElementId(slabElement));
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(file, ifcGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacement, exportParts ? null : prodDefHnd,
ifcTag, entityType);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, slabElement, slabHnd, productWrapper, placementSetter, localPlacement, null);
}
productWrapper.AddElement(slabElement, slabHnd, placementSetter, ecData, true);
if (!exportParts)
{
if (slabElement is HostObject)
{
HostObject hostObject = slabElement as HostObject;
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, hostObject, slabHnd,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, isBRepSlabHnd);
}
else if (slabElement is FamilyInstance)
{
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, slabElement);
Document doc = slabElement.Document;
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, matId);
}
OpeningUtil.CreateOpeningsIfNecessary(slabHnd, slabElement, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), placementSetter, productWrapper);
}
}
}
tr.Commit();
return;
}
}
}
/// <summary>
/// Exports a roof to IfcRoof.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="ifcEnumType">The roof type.</param>
/// <param name="roof">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportRoof(ExporterIFC exporterIFC, string ifcEnumType, Element roof, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (roof == null || geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, roof))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// If the roof is an in-place family, we will allow any arbitrary orientation. While this may result in some
// in-place "cubes" exporting with the wrong direction, it is unlikely that an in-place family would be
// used for this reason in the first place.
ecData.PossibleExtrusionAxes = (roof is FamilyInstance) ? IFCExtrusionAxes.TryXYZ : IFCExtrusionAxes.TryZ;
ecData.AreInnerRegionsOpenings = true;
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(roof);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
BodyData bodyData;
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, roof,
categoryId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return;
}
bool exportSlab = ecData.ScaledLength > MathUtil.Eps();
string guid = GUIDUtil.CreateGUID(roof);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string roofName = NamingUtil.GetNameOverride(roof, NamingUtil.GetIFCName(roof));
string roofDescription = NamingUtil.GetDescriptionOverride(roof, null);
string roofObjectType = NamingUtil.GetObjectTypeOverride(roof, NamingUtil.CreateIFCObjectName(exporterIFC, roof));
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
string elementTag = NamingUtil.GetTagOverride(roof, NamingUtil.CreateIFCElementId(roof));
string roofType = GetIFCRoofType(ifcEnumType);
roofType = IFCValidateEntry.GetValidIFCType(roof, ifcEnumType);
IFCAnyHandle roofHnd = IFCInstanceExporter.CreateRoof(file, guid, ownerHistory, roofName, roofDescription,
roofObjectType, localPlacement, exportSlab ? null : representation, elementTag, roofType);
productWrapper.AddElement(roof, roofHnd, placementSetter.LevelInfo, ecData, true);
// will export its host object materials later if it is a roof
if (!(roof is RoofBase))
{
CategoryUtil.CreateMaterialAssociations(exporterIFC, roofHnd, bodyData.MaterialIds);
}
if (exportSlab)
{
string slabGUID = GUIDUtil.CreateSubElementGUID(roof, (int)IFCRoofSubElements.RoofSlabStart);
string slabName = roofName + ":1";
IFCAnyHandle slabLocalPlacementHnd = ExporterUtil.CopyLocalPlacement(file, localPlacement);
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(file, slabGUID, ownerHistory, slabName,
roofDescription, roofObjectType, slabLocalPlacementHnd, representation, elementTag, "ROOF");
Transform offsetTransform = (bodyData != null) ? bodyData.OffsetTransform : Transform.Identity;
OpeningUtil.CreateOpeningsIfNecessary(slabHnd, roof, ecData, offsetTransform,
exporterIFC, slabLocalPlacementHnd, placementSetter, productWrapper);
ExporterUtil.RelateObject(exporterIFC, roofHnd, slabHnd);
productWrapper.AddElement(null, slabHnd, placementSetter.LevelInfo, ecData, false);
CategoryUtil.CreateMaterialAssociations(exporterIFC, slabHnd, bodyData.MaterialIds);
}
}
tr.Commit();
}
}
}
/// <summary>
/// Exports the top stories of a multistory ramp.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="ramp">The ramp element.</param>
/// <param name="numFlights">The number of flights for a multistory ramp.</param>
/// <param name="rampHnd">The stairs container handle.</param>
/// <param name="components">The components handles.</param>
/// <param name="ecData">The extrusion creation data.</param>
/// <param name="componentECData">The extrusion creation data for the components.</param>
/// <param name="placementSetter">The placement setter.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportMultistoryRamp(ExporterIFC exporterIFC, Element ramp, int numFlights,
IFCAnyHandle rampHnd, IList <IFCAnyHandle> components, IList <IFCExtrusionCreationData> componentECData,
PlacementSetter placementSetter, ProductWrapper productWrapper)
{
if (numFlights < 2)
{
return;
}
double heightNonScaled = GetRampHeight(exporterIFC, ramp);
if (heightNonScaled < MathUtil.Eps())
{
return;
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(rampHnd))
{
return;
}
IFCAnyHandle localPlacement = IFCAnyHandleUtil.GetObjectPlacement(rampHnd);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(localPlacement))
{
return;
}
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle relPlacement = GeometryUtil.GetRelativePlacementFromLocalPlacement(localPlacement);
IFCAnyHandle ptHnd = IFCAnyHandleUtil.GetLocation(relPlacement);
IList <double> origCoords = IFCAnyHandleUtil.GetCoordinates(ptHnd);
IList <IFCAnyHandle> rampLocalPlacementHnds = new List <IFCAnyHandle>();
IList <IFCLevelInfo> levelInfos = new List <IFCLevelInfo>();
for (int ii = 0; ii < numFlights - 1; ii++)
{
IFCAnyHandle newLevelHnd = null;
// We are going to avoid internal scaling routines, and instead scale in .NET.
double newOffsetUnscaled = 0.0;
IFCLevelInfo currLevelInfo =
placementSetter.GetOffsetLevelInfoAndHandle(heightNonScaled * (ii + 1), 1.0, ramp.Document, out newLevelHnd, out newOffsetUnscaled);
double newOffsetScaled = UnitUtil.ScaleLength(newOffsetUnscaled);
levelInfos.Add(currLevelInfo);
if (levelInfos[ii] == null)
{
levelInfos[ii] = placementSetter.LevelInfo;
}
XYZ orig;
if (ptHnd.HasValue)
{
orig = new XYZ(origCoords[0], origCoords[1], newOffsetScaled);
}
else
{
orig = new XYZ(0.0, 0.0, newOffsetScaled);
}
rampLocalPlacementHnds.Add(ExporterUtil.CreateLocalPlacement(file, newLevelHnd, orig, null, null));
}
IList <List <IFCAnyHandle> > newComponents = new List <List <IFCAnyHandle> >();
for (int ii = 0; ii < numFlights - 1; ii++)
{
newComponents.Add(new List <IFCAnyHandle>());
}
int compIdx = 0;
ElementId catId = CategoryUtil.GetSafeCategoryId(ramp);
foreach (IFCAnyHandle component in components)
{
string componentName = IFCAnyHandleUtil.GetStringAttribute(component, "Name");
string componentDescription = IFCAnyHandleUtil.GetStringAttribute(component, "Description");
string componentObjectType = IFCAnyHandleUtil.GetStringAttribute(component, "ObjectType");
string componentElementTag = IFCAnyHandleUtil.GetStringAttribute(component, "Tag");
IFCAnyHandle componentProdRep = IFCAnyHandleUtil.GetInstanceAttribute(component, "Representation");
IList <string> localComponentNames = new List <string>();
IList <IFCAnyHandle> componentPlacementHnds = new List <IFCAnyHandle>();
IFCAnyHandle localLocalPlacement = IFCAnyHandleUtil.GetObjectPlacement(component);
IFCAnyHandle localRelativePlacement =
(localLocalPlacement == null) ? null : IFCAnyHandleUtil.GetInstanceAttribute(localLocalPlacement, "RelativePlacement");
bool isSubRamp = component.IsSubTypeOf(IFCEntityType.IfcRamp.ToString());
for (int ii = 0; ii < numFlights - 1; ii++)
{
localComponentNames.Add((componentName == null) ? (ii + 2).ToString() : (componentName + ":" + (ii + 2)));
if (isSubRamp)
{
componentPlacementHnds.Add(ExporterUtil.CopyLocalPlacement(file, rampLocalPlacementHnds[ii]));
}
else
{
componentPlacementHnds.Add(IFCInstanceExporter.CreateLocalPlacement(file, rampLocalPlacementHnds[ii], localRelativePlacement));
}
}
IList <IFCAnyHandle> localComponentHnds = new List <IFCAnyHandle>();
if (isSubRamp)
{
string componentType = IFCAnyHandleUtil.GetEnumerationAttribute(component, "ShapeType");
string localRampType = GetIFCRampType(componentType);
for (int ii = 0; ii < numFlights - 1; ii++)
{
IFCAnyHandle representationCopy =
ExporterUtil.CopyProductDefinitionShape(exporterIFC, ramp, catId, componentProdRep);
localComponentHnds.Add(IFCInstanceExporter.CreateRamp(file, GUIDUtil.CreateGUID(), ownerHistory,
localComponentNames[ii], componentDescription, componentObjectType, componentPlacementHnds[ii], representationCopy,
componentElementTag, localRampType));
}
}
else if (IFCAnyHandleUtil.IsSubTypeOf(component, IFCEntityType.IfcRampFlight))
{
for (int ii = 0; ii < numFlights - 1; ii++)
{
IFCAnyHandle representationCopy =
ExporterUtil.CopyProductDefinitionShape(exporterIFC, ramp, catId, componentProdRep);
localComponentHnds.Add(IFCInstanceExporter.CreateRampFlight(file, GUIDUtil.CreateGUID(), ownerHistory,
localComponentNames[ii], componentDescription, componentObjectType, componentPlacementHnds[ii], representationCopy,
componentElementTag, "NOTDEFINED"));
}
}
else if (IFCAnyHandleUtil.IsSubTypeOf(component, IFCEntityType.IfcSlab))
{
string componentType = IFCAnyHandleUtil.GetEnumerationAttribute(component, "PredefinedType");
IFCSlabType localLandingType = FloorExporter.GetIFCSlabType(componentType);
for (int ii = 0; ii < numFlights - 1; ii++)
{
IFCAnyHandle representationCopy =
ExporterUtil.CopyProductDefinitionShape(exporterIFC, ramp, catId, componentProdRep);
localComponentHnds.Add(IFCInstanceExporter.CreateSlab(file, GUIDUtil.CreateGUID(), ownerHistory,
localComponentNames[ii], componentDescription, componentObjectType, componentPlacementHnds[ii], representationCopy,
componentElementTag, localLandingType.ToString()));
}
}
else if (IFCAnyHandleUtil.IsSubTypeOf(component, IFCEntityType.IfcMember))
{
for (int ii = 0; ii < numFlights - 1; ii++)
{
IFCAnyHandle representationCopy =
ExporterUtil.CopyProductDefinitionShape(exporterIFC, ramp, catId, componentProdRep);
localComponentHnds.Add(IFCInstanceExporter.CreateMember(file, GUIDUtil.CreateGUID(), ownerHistory,
localComponentNames[ii], componentDescription, componentObjectType, componentPlacementHnds[ii], representationCopy,
componentElementTag, "STRINGER"));
}
}
for (int ii = 0; ii < numFlights - 1; ii++)
{
if (localComponentHnds[ii] != null)
{
newComponents[ii].Add(localComponentHnds[ii]);
productWrapper.AddElement(null, localComponentHnds[ii], levelInfos[ii], componentECData[compIdx], false);
}
}
compIdx++;
}
// finally add a copy of the container.
IList <IFCAnyHandle> rampCopyHnds = new List <IFCAnyHandle>();
for (int ii = 0; ii < numFlights - 1; ii++)
{
string rampName = IFCAnyHandleUtil.GetStringAttribute(rampHnd, "Name");
string rampObjectType = IFCAnyHandleUtil.GetStringAttribute(rampHnd, "ObjectType");
string rampDescription = IFCAnyHandleUtil.GetStringAttribute(rampHnd, "Description");
string rampElementTag = IFCAnyHandleUtil.GetStringAttribute(rampHnd, "Tag");
string rampTypeAsString = IFCAnyHandleUtil.GetEnumerationAttribute(rampHnd, "ShapeType");
string rampType = GetIFCRampType(rampTypeAsString);
string containerRampName = rampName + ":" + (ii + 2);
rampCopyHnds.Add(IFCInstanceExporter.CreateRamp(file, GUIDUtil.CreateGUID(), ownerHistory,
containerRampName, rampDescription, rampObjectType, rampLocalPlacementHnds[ii], null, rampElementTag, rampType));
productWrapper.AddElement(ramp, rampCopyHnds[ii], levelInfos[ii], null, true);
}
for (int ii = 0; ii < numFlights - 1; ii++)
{
StairRampContainerInfo stairRampInfo = new StairRampContainerInfo(rampCopyHnds[ii], newComponents[ii],
rampLocalPlacementHnds[ii]);
ExporterCacheManager.StairRampContainerInfoCache.AppendStairRampContainerInfo(ramp.Id, stairRampInfo);
}
}
/// <summary>
/// Exports a Rebar Coupler,
/// </summary>
/// <param name="exporterIFC">The exporter.</param>
/// <param name="coupler">The RebarCoupler element.</param>
/// <param name="productWrapper">The product wrapper.</param>
public static void ExportCoupler(ExporterIFC exporterIFC, RebarCoupler coupler, ProductWrapper productWrapper)
{
if (coupler == null)
{
return;
}
FamilySymbol familySymbol = ExporterCacheManager.Document.GetElement(coupler.GetTypeId()) as FamilySymbol;
if (familySymbol == null)
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcMechanicalFastener", out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
ElementId categoryId = CategoryUtil.GetSafeCategoryId(coupler);
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
Options options = GeometryUtil.GetIFCExportGeometryOptions();;
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, coupler, out ifcEnumType);
using (IFCTransaction tr = new IFCTransaction(file))
{
FamilyTypeInfo currentTypeInfo = ExporterCacheManager.FamilySymbolToTypeInfoCache.Find(coupler.GetTypeId(), false, exportType.ExportType);
bool found = currentTypeInfo.IsValid();
if (!found)
{
string typeObjectType = NamingUtil.CreateIFCObjectName(exporterIFC, familySymbol);
HashSet <IFCAnyHandle> propertySetsOpt = new HashSet <IFCAnyHandle>();
GeometryElement exportGeometry = familySymbol.get_Geometry(options);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
bodyData = BodyExporter.ExportBody(exporterIFC, coupler, categoryId, ElementId.InvalidElementId, exportGeometry, bodyExporterOptions, null);
List <IFCAnyHandle> repMap = new List <IFCAnyHandle>();
IFCAnyHandle origin = ExporterUtil.CreateAxis2Placement3D(file);;
repMap.Add(IFCInstanceExporter.CreateRepresentationMap(file, origin, bodyData.RepresentationHnd));
IFCAnyHandle styleHandle = FamilyExporterUtil.ExportGenericType(exporterIFC, exportType, ifcEnumType, propertySetsOpt, repMap, coupler, familySymbol);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
string applicableOccurrence = NamingUtil.GetObjectTypeOverride(familySymbol, typeObjectType);
if (!string.IsNullOrEmpty(applicableOccurrence))
{
IFCAnyHandleUtil.SetAttribute(styleHandle, "ApplicableOccurrence", applicableOccurrence);
}
currentTypeInfo.Style = styleHandle;
ExporterCacheManager.FamilySymbolToTypeInfoCache.Register(coupler.GetTypeId(), false, exportType.ExportType, currentTypeInfo);
}
}
int nCouplerQuantity = coupler.GetCouplerQuantity();
if (nCouplerQuantity <= 0)
{
return;
}
ISet <IFCAnyHandle> createdRebarCouplerHandles = new HashSet <IFCAnyHandle>();
string origInstanceName = NamingUtil.GetNameOverride(coupler, NamingUtil.GetIFCName(coupler));
for (int idx = 0; idx < nCouplerQuantity; idx++)
{
string instanceGUID = GUIDUtil.CreateSubElementGUID(coupler, idx);
IFCAnyHandle style = currentTypeInfo.Style;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(style))
{
return;
}
IList <IFCAnyHandle> repMapList = GeometryUtil.GetRepresentationMaps(style);
if (repMapList == null)
{
return;
}
if (repMapList.Count == 0)
{
return;
}
IList <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>();
IFCAnyHandle contextOfItems3d = exporterIFC.Get3DContextHandle("Body");
ISet <IFCAnyHandle> representations = new HashSet <IFCAnyHandle>();
representations.Add(ExporterUtil.CreateDefaultMappedItem(file, repMapList[0], XYZ.Zero));
IFCAnyHandle shapeRep = RepresentationUtil.CreateBodyMappedItemRep(exporterIFC, coupler, categoryId, contextOfItems3d, representations);
shapeReps.Add(shapeRep);
IFCAnyHandle productRepresentation = IFCInstanceExporter.CreateProductDefinitionShape(exporterIFC.GetFile(), null, null, shapeReps);
Transform trf = coupler.GetCouplerPositionTransform(idx);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, coupler, trf, null))
{
IFCAnyHandle instanceHandle = null;
IFCExportInfoPair exportMechFastener = new IFCExportInfoPair();
exportMechFastener.SetValueWithPair(IFCEntityType.IfcMechanicalFastener);
instanceHandle = IFCInstanceExporter.CreateGenericIFCEntity(exportMechFastener, exporterIFC, coupler, instanceGUID, ownerHistory,
setter.LocalPlacement, productRepresentation);
string instanceName = NamingUtil.GetNameOverride(instanceHandle, coupler, origInstanceName + ": " + idx);
IFCAnyHandleUtil.SetAttribute(instanceHandle, "Name", instanceName);
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
// In IFC4 NominalDiameter and NominalLength attributes have been deprecated. PredefinedType attribute was added.
IFCAnyHandleUtil.SetAttribute(instanceHandle, "PredefinedType", Revit.IFC.Export.Toolkit.IFC4.IFCMechanicalFastenerType.USERDEFINED);
}
else
{
IFCAnyHandleUtil.SetAttribute(instanceHandle, "NominalDiameter", familySymbol.get_Parameter(BuiltInParameter.COUPLER_WIDTH).AsDouble());
IFCAnyHandleUtil.SetAttribute(instanceHandle, "NominalLength", familySymbol.get_Parameter(BuiltInParameter.COUPLER_LENGTH).AsDouble());
}
createdRebarCouplerHandles.Add(instanceHandle);
productWrapper.AddElement(coupler, instanceHandle, setter, null, true);
}
}
string couplerGUID = GUIDUtil.CreateGUID(coupler);
if (nCouplerQuantity > 1)
{
// Create a group to hold all of the created IFC entities, if the coupler aren't already in an assembly.
// We want to avoid nested groups of groups of couplers.
if (coupler.AssemblyInstanceId == ElementId.InvalidElementId)
{
string revitObjectType = exporterIFC.GetFamilyName();
string name = NamingUtil.GetNameOverride(coupler, revitObjectType);
string description = NamingUtil.GetDescriptionOverride(coupler, null);
string objectType = NamingUtil.GetObjectTypeOverride(coupler, revitObjectType);
IFCAnyHandle rebarGroup = IFCInstanceExporter.CreateGroup(file, couplerGUID,
ownerHistory, name, description, objectType);
productWrapper.AddElement(coupler, rebarGroup);
IFCInstanceExporter.CreateRelAssignsToGroup(file, GUIDUtil.CreateGUID(), ownerHistory,
null, null, createdRebarCouplerHandles, null, rebarGroup);
}
}
else
{
// We will update the GUID of the one created element to be the element GUID.
// This will allow the IfcGUID parameter to be use/set if appropriate.
ExporterUtil.SetGlobalId(createdRebarCouplerHandles.ElementAt(0), couplerGUID);
}
tr.Commit();
}
}
/// <summary>
/// Checks if exporting an element of Ramp category.
/// </summary>
/// <param name="element">The element.</param>
/// <returns>True if element is of category OST_Ramps.</returns>
static public bool IsRamp(Element element)
{
// FaceWall should be exported as IfcWall.
return(CategoryUtil.GetSafeCategoryId(element) == new ElementId(BuiltInCategory.OST_Ramps));
}
/// <summary>
/// Exports a geometry element to boundary representation.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="exportBoundaryRep">True if to export boundary representation.</param>
/// <param name="exportAsFacetation">True if to export the geometry as facetation.</param>
/// <param name="bodyRep">Body representation.</param>
/// <param name="boundaryRep">Boundary representation.</param>
/// <returns>True if success, false if fail.</returns>
public static bool ExportSurface(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
bool exportBoundaryRep, bool exportAsFacetation, ref IFCAnyHandle bodyRep, ref IFCAnyHandle boundaryRep)
{
if (geometryElement == null)
{
return(false);
}
IFCGeometryInfo ifcGeomInfo = null;
Document doc = element.Document;
Plane plane = GeometryUtil.CreateDefaultPlane();
XYZ projDir = new XYZ(0, 0, 1);
double eps = UnitUtil.ScaleLength(doc.Application.VertexTolerance);
ifcGeomInfo = IFCGeometryInfo.CreateFaceGeometryInfo(exporterIFC, plane, projDir, eps, exportBoundaryRep);
ExporterIFCUtils.CollectGeometryInfo(exporterIFC, ifcGeomInfo, geometryElement, XYZ.Zero, true);
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle surface;
// Use tessellated geometry for surface in IFC Reference View
if (ExporterUtil.IsReferenceView())
{
BodyExporterOptions options = new BodyExporterOptions(false);
surface = BodyExporter.ExportBodyAsTriangulatedFaceSet(exporterIFC, element, options, geometryElement);
}
else
{
HashSet <IFCAnyHandle> faceSets = new HashSet <IFCAnyHandle>();
IList <ICollection <IFCAnyHandle> > faceList = ifcGeomInfo.GetFaces();
foreach (ICollection <IFCAnyHandle> faces in faceList)
{
// no faces, don't complain.
if (faces.Count == 0)
{
continue;
}
HashSet <IFCAnyHandle> faceSet = new HashSet <IFCAnyHandle>(faces);
faceSets.Add(IFCInstanceExporter.CreateConnectedFaceSet(file, faceSet));
}
if (faceSets.Count == 0)
{
return(false);
}
surface = IFCInstanceExporter.CreateFaceBasedSurfaceModel(file, faceSets);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(surface))
{
return(false);
}
BodyExporter.CreateSurfaceStyleForRepItem(exporterIFC, doc, surface, BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element));
ISet <IFCAnyHandle> surfaceItems = new HashSet <IFCAnyHandle>();
surfaceItems.Add(surface);
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
bodyRep = RepresentationUtil.CreateSurfaceRep(exporterIFC, element, catId, exporterIFC.Get3DContextHandle("Body"), surfaceItems,
exportAsFacetation, bodyRep);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
return(false);
}
ICollection <IFCAnyHandle> boundaryRepresentations = ifcGeomInfo.GetRepresentations();
if (exportBoundaryRep && boundaryRepresentations.Count > 0)
{
HashSet <IFCAnyHandle> boundaryRepresentationSet = new HashSet <IFCAnyHandle>();
boundaryRepresentationSet.UnionWith(boundaryRepresentations);
boundaryRep = RepresentationUtil.CreateBoundaryRep(exporterIFC, element, catId, exporterIFC.Get3DContextHandle("FootPrint"), boundaryRepresentationSet,
boundaryRep);
}
return(true);
}
/// <summary>
/// Exports an element as an IfcReinforcingMesh.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if exported successfully, false otherwise.</returns>
public static bool ExportFabricSheet(ExporterIFC exporterIFC, FabricSheet sheet,
GeometryElement geometryElement, ProductWrapper productWrapper)
{
if (sheet == null || geometryElement == null)
{
return(false);
}
Document doc = sheet.Document;
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (IFCPlacementSetter placementSetter = IFCPlacementSetter.Create(exporterIFC, sheet, null, null, ExporterUtil.GetBaseLevelIdForElement(sheet)))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.GetPlacement());
ElementId categoryId = CategoryUtil.GetSafeCategoryId(sheet);
ElementId materialId = ElementId.InvalidElementId;
ParameterUtil.GetElementIdValueFromElementOrSymbol(sheet, BuiltInParameter.MATERIAL_ID_PARAM, out materialId);
double scale = exporterIFC.LinearScale;
string guid = GUIDUtil.CreateGUID(sheet);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string revitObjectType = exporterIFC.GetFamilyName();
string name = NamingUtil.GetNameOverride(sheet, revitObjectType);
string description = NamingUtil.GetDescriptionOverride(sheet, null);
string objectType = NamingUtil.GetObjectTypeOverride(sheet, revitObjectType);
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
string elementTag = NamingUtil.CreateIFCElementId(sheet);
string steelGrade = NamingUtil.GetOverrideStringValue(sheet, "SteelGrade", null);
double?meshLength = sheet.CutOverallLength;
double?meshWidth = sheet.CutOverallWidth;
Element fabricSheetTypeElem = doc.GetElement(sheet.GetTypeId());
FabricSheetType fabricSheetType = (fabricSheetTypeElem == null) ? null : (fabricSheetTypeElem as FabricSheetType);
double longitudinalBarNominalDiameter = 0.0;
double transverseBarNominalDiameter = 0.0;
double longitudinalBarCrossSectionArea = 0.0;
double transverseBarCrossSectionArea = 0.0;
double longitudinalBarSpacing = 0.0;
double transverseBarSpacing = 0.0;
if (fabricSheetType != null)
{
Element majorFabricWireTypeElem = doc.GetElement(fabricSheetType.MajorDirectionWireType);
FabricWireType majorFabricWireType = (majorFabricWireTypeElem == null) ? null : (majorFabricWireTypeElem as FabricWireType);
if (majorFabricWireType != null)
{
longitudinalBarNominalDiameter = majorFabricWireType.WireDiameter * scale;
double localRadius = longitudinalBarNominalDiameter / 2.0;
longitudinalBarCrossSectionArea = localRadius * localRadius * Math.PI;
}
Element minorFabricWireTypeElem = doc.GetElement(fabricSheetType.MinorDirectionWireType);
FabricWireType minorFabricWireType = (minorFabricWireTypeElem == null) ? null : (minorFabricWireTypeElem as FabricWireType);
if (minorFabricWireType != null)
{
transverseBarNominalDiameter = minorFabricWireType.WireDiameter * scale;
double localRadius = transverseBarNominalDiameter / 2.0;
transverseBarCrossSectionArea = localRadius * localRadius * Math.PI;
}
longitudinalBarSpacing = fabricSheetType.MajorSpacing * scale;
transverseBarSpacing = fabricSheetType.MinorSpacing * scale;
}
IList <IFCAnyHandle> bodyItems = new List <IFCAnyHandle>();
IList <Curve> wireCenterlines = sheet.GetWireCenterlines(WireDistributionDirection.Major);
foreach (Curve wireCenterline in wireCenterlines)
{
IFCAnyHandle bodyItem = CreateSweptDiskSolid(exporterIFC, file, wireCenterline, longitudinalBarNominalDiameter);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(bodyItem))
{
bodyItems.Add(bodyItem);
}
}
wireCenterlines = sheet.GetWireCenterlines(WireDistributionDirection.Minor);
foreach (Curve wireCenterline in wireCenterlines)
{
IFCAnyHandle bodyItem = CreateSweptDiskSolid(exporterIFC, file, wireCenterline, transverseBarNominalDiameter);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(bodyItem))
{
bodyItems.Add(bodyItem);
}
}
IFCAnyHandle shapeRep = (bodyItems.Count > 0) ?
RepresentationUtil.CreateAdvancedSweptSolidRep(exporterIFC, sheet, categoryId, exporterIFC.Get3DContextHandle("Body"), bodyItems, null) :
null;
IList <IFCAnyHandle> shapeReps = null;
if (shapeRep != null)
{
shapeReps = new List <IFCAnyHandle>();
shapeReps.Add(shapeRep);
}
IFCAnyHandle prodRep = (shapeReps != null) ? IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps) : null;
IFCAnyHandle fabricSheet = IFCInstanceExporter.CreateReinforcingMesh(file, guid,
ownerHistory, name, description, objectType, localPlacement, prodRep, elementTag,
steelGrade, meshLength, meshWidth, longitudinalBarNominalDiameter, transverseBarNominalDiameter,
longitudinalBarCrossSectionArea, transverseBarCrossSectionArea,
longitudinalBarSpacing, transverseBarSpacing);
ElementId fabricAreaId = sheet.FabricAreaOwnerId;
if (fabricAreaId != ElementId.InvalidElementId)
{
HashSet <IFCAnyHandle> fabricSheets = null;
if (!ExporterCacheManager.FabricAreaHandleCache.TryGetValue(fabricAreaId, out fabricSheets))
{
fabricSheets = new HashSet <IFCAnyHandle>();
ExporterCacheManager.FabricAreaHandleCache[fabricAreaId] = fabricSheets;
}
fabricSheets.Add(fabricSheet);
}
productWrapper.AddElement(sheet, fabricSheet, placementSetter.GetLevelInfo(), ecData, true);
CategoryUtil.CreateMaterialAssociation(exporterIFC, fabricSheet, materialId);
}
}
tr.Commit();
return(true);
}
}
/// <summary>
/// Exports curtain object as one Brep.
/// </summary>
/// <param name="allSubElements">
/// Collection of elements contained in the host curtain element.
/// </param>
/// <param name="wallElement">
/// The curtain wall element.
/// </param>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="setter">
/// The PlacementSetter object.
/// </param>
/// <param name="localPlacement">
/// The local placement handle.
/// </param>
/// <returns>
/// The handle.
/// </returns>
public static IFCAnyHandle ExportCurtainObjectCommonAsOneBRep(ICollection <ElementId> allSubElements, Element wallElement,
ExporterIFC exporterIFC, PlacementSetter setter, IFCAnyHandle localPlacement)
{
IFCAnyHandle prodDefRep = null;
Document document = wallElement.Document;
double eps = UnitUtil.ScaleLength(document.Application.VertexTolerance);
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle contextOfItems = exporterIFC.Get3DContextHandle("Body");
IFCGeometryInfo info = IFCGeometryInfo.CreateFaceGeometryInfo(eps);
ISet <IFCAnyHandle> bodyItems = new HashSet <IFCAnyHandle>();
// Want to make sure we don't accidentally add a mullion or curtain line more than once.
HashSet <ElementId> alreadyVisited = new HashSet <ElementId>();
bool useFallbackBREP = true;
Options geomOptions = GeometryUtil.GetIFCExportGeometryOptions();
foreach (ElementId subElemId in allSubElements)
{
Element subElem = wallElement.Document.GetElement(subElemId);
GeometryElement geomElem = subElem.get_Geometry(geomOptions);
if (geomElem == null)
{
continue;
}
if (alreadyVisited.Contains(subElem.Id))
{
continue;
}
alreadyVisited.Add(subElem.Id);
// Export tessellated geometry when IFC4 Reference View is selected
if (ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(false, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle triFaceSet = BodyExporter.ExportBodyAsTessellatedFaceSet(exporterIFC, subElem, bodyExporterOptions, geomElem);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(triFaceSet))
{
bodyItems.Add(triFaceSet);
useFallbackBREP = false; // no need to do Brep since it is successful
}
}
// Export AdvancedFace before use fallback BREP
else if (ExporterCacheManager.ExportOptionsCache.ExportAs4DesignTransferView)
{
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(false, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle advancedBRep = BodyExporter.ExportBodyAsAdvancedBrep(exporterIFC, subElem, bodyExporterOptions, geomElem);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(advancedBRep))
{
bodyItems.Add(advancedBRep);
useFallbackBREP = false; // no need to do Brep since it is successful
}
}
if (useFallbackBREP)
{
ExporterIFCUtils.CollectGeometryInfo(exporterIFC, info, geomElem, XYZ.Zero, false);
HashSet <IFCAnyHandle> faces = new HashSet <IFCAnyHandle>(info.GetSurfaces());
IFCAnyHandle outer = IFCInstanceExporter.CreateClosedShell(file, faces);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(outer))
{
bodyItems.Add(RepresentationUtil.CreateFacetedBRep(exporterIFC, document, outer, ElementId.InvalidElementId));
}
}
}
if (bodyItems.Count == 0)
{
return(prodDefRep);
}
ElementId catId = CategoryUtil.GetSafeCategoryId(wallElement);
IFCAnyHandle shapeRep;
// Use tessellated geometry in Reference View
if (ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView && !useFallbackBREP)
{
shapeRep = RepresentationUtil.CreateTessellatedRep(exporterIFC, wallElement, catId, contextOfItems, bodyItems, null);
}
else if (ExporterCacheManager.ExportOptionsCache.ExportAs4DesignTransferView && !useFallbackBREP)
{
shapeRep = RepresentationUtil.CreateAdvancedBRepRep(exporterIFC, wallElement, catId, contextOfItems, bodyItems, null);
}
else
{
shapeRep = RepresentationUtil.CreateBRepRep(exporterIFC, wallElement, catId, contextOfItems, bodyItems);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(shapeRep))
{
return(prodDefRep);
}
IList <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>();
shapeReps.Add(shapeRep);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, wallElement.get_Geometry(geomOptions), Transform.Identity);
if (boundingBoxRep != null)
{
shapeReps.Add(boundingBoxRep);
}
prodDefRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps);
return(prodDefRep);
}
