private void CarTest_FormClosing(object sender, FormClosingEventArgs e)
{
try
{
RecvThread.Abort();
if (canOpen)
{
CanZLG.VCI_CloseDevice(m_devtype, 0);
}
timer1.Stop();
SimulateTimer.Stop();
sw_Record.Close();
}
catch (Exception)
{
}
}
private void StartCanButton_Click(object sender, EventArgs e)
{
if (canOpen)
{
canOpen = false;
CanZLG.VCI_CloseDevice(m_devtype, 0);
}
CanZLG.VCI_INIT_CONFIG init_config = new CanZLG.VCI_INIT_CONFIG();
init_config.Mode = 0;
init_config.Filter = 1;
init_config.AccCode = 0;
init_config.AccMask = 0xffffffff;
init_config.AccCode = 0x451 << 20;
init_config.AccMask = 0x000FFFFF;
// init_config.Timing0 = 0;
// init_config.Timing1 = 0x1c;
if (CanZLG.VCI_OpenDevice(m_devtype, 0, 0) != CanZLG.STATUS_OK)
{
MessageBox.Show("Open device fault!", "Error!", MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
byte[] baud;
baud = BitConverter.GetBytes(0x60007); //500k 0x60007
//UInt32 baud;
//baud = 0x1000c8;
if (CanZLG.VCI_SetReference(m_devtype, 0, can_ind1, 0, baud) != CanZLG.STATUS_OK)
{
MessageBox.Show("设置波特率错误，打开设备失败!", "错误", MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
CanZLG.VCI_CloseDevice(m_devtype, 0);
return;
}
if (CanZLG.VCI_InitCAN(m_devtype, 0, can_ind1, ref init_config) != CanZLG.STATUS_OK)
{
MessageBox.Show("Init can fault!", "Error!", MessageBoxButtons.OK, MessageBoxIcon.Error);
CanZLG.VCI_CloseDevice(m_devtype, 0);
return;
}
if (CanZLG.VCI_StartCAN(m_devtype, 0, can_ind1) != CanZLG.STATUS_OK)
{
MessageBox.Show("Start Failed");
}
/*
* baud = BitConverter.GetBytes(0x1000c8);//250k
* init_config.Timing0 = 1;
* init_config.Timing1 = 0x1c;
* if (CanZLG.VCI_SetReference(m_devtype, 0, can_ind0, 0, baud) != CanZLG.STATUS_OK)
* {
*
* MessageBox.Show("设置波特率错误，打开设备失败!", "错误", MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
* CanZLG.VCI_CloseDevice(m_devtype, 0);
* return;
* }
*
* if (CanZLG.VCI_InitCAN(m_devtype, 0, can_ind0, ref init_config) != CanZLG.STATUS_OK)
* {
*
* //MessageBox.Show("Init can fault!", "Error!", MessageBoxButtons.OK, MessageBoxIcon.Error);
*
* //CanZLG.VCI_CloseDevice(m_devtype, 0);
* //return;
* }
* if (CanZLG.VCI_StartCAN(m_devtype, 0, can_ind0) != CanZLG.STATUS_OK)
* {
* MessageBox.Show("Start Failed");
* }
*/
canOpen = true;
StartCanButton.Enabled = false;
ModeButton.Enabled = true;
ResetCanButton.Enabled = true;
//RecTimer.Start();
}