public static bool isOpenedWindow()
{
try
{
Process[] processList = Process.GetProcessesByName("femm");
if (processList.Length > 1)
{
CNotice.noticeWarningID("OOFP");
return(false);
}
if (processList.Length != 1)
{
return(false);
}
Process femmProcess = processList[0];
// Window 닫혀 있으면 Main Window Handle 값이 null 이다.
if (femmProcess.MainWindowTitle != "")
{
return(true);
}
else
{
return(false);
}
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return(false);
}
}
// 파일스트림 객체에 코일 정보를 기록한다.
// override 를 꼭 사용해야 가상함수가 아니라 현 함수가 호출된다.
public override bool writeObject(StreamWriter writeStream, int nLevel)
{
try
{
CWriteFile writeFile = new CWriteFile();
writeFile.writeBeginLine(writeStream, "ForceTest", nLevel);
// CNode
writeFile.writeDataLine(writeStream, "NodeName", NodeName, nLevel + 1);
writeFile.writeDataLine(writeStream, "KindKey", KindKey, nLevel + 1);
// CTest
writeFile.writeDataLine(writeStream, "MeshSizePercent", MeshSizePercent, nLevel + 1);
// CForceTest
writeFile.writeDataLine(writeStream, "Voltage", Voltage, nLevel + 1);
writeFile.writeDataLine(writeStream, "Current", Current, nLevel + 1);
writeFile.writeDataLine(writeStream, "MovingStroke", MovingStroke, nLevel + 1);
writeFile.writeEndLine(writeStream, "ForceTest", nLevel);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return(false);
}
return(true);
}
// 파일스트림 객체에 코일 정보를 기록한다.
// override 를 꼭 사용해야 가상함수가 아니라 현 함수가 호출된다.
public override bool writeObject(StreamWriter writeStream, int nLevel)
{
try
{
CWriteFile writeFile = new CWriteFile();
writeFile.writeBeginLine(writeStream, "Non-Kind", nLevel);
// CNode
writeFile.writeDataLine(writeStream, "NodeName", NodeName, nLevel + 1);
writeFile.writeDataLine(writeStream, "KindKey", KindKey, nLevel + 1);
// Non Kind 는 CNode 의 정보와 CShapParts 의 Face 정보만 필요하기 때문에
// 나머지 정보는 저장하지 않는다.
//
// CShapeParts
//writeFile.writeDataLine(writeStream, "MovingParts", MovingPart, nLevel + 1);
// CFace
if (Face != null)
{
Face.writeObject(writeStream, nLevel + 1);
}
writeFile.writeEndLine(writeStream, "Non-Kind", nLevel);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return(false);
}
return(true);
}
// 파일스트림 객체에 코일 정보를 기록한다.
// override 를 꼭 사용해야 가상함수가 아니라 현 함수가 호출된다.
public override bool writeObject(StreamWriter writeStream, int nLevel)
{
try
{
CWriteFile writeFile = new CWriteFile();
writeFile.writeBeginLine(writeStream, "Magnet", nLevel);
// CNode
writeFile.writeDataLine(writeStream, "NodeName", NodeName, nLevel + 1);
writeFile.writeDataLine(writeStream, "KindKey", KindKey, nLevel + 1);
// CParts
writeFile.writeDataLine(writeStream, "MovingParts", MovingPart, nLevel + 1);
// CMagnet
writeFile.writeDataLine(writeStream, "Material", m_strMaterialName, nLevel + 1);
writeFile.writeDataLine(writeStream, "MagnetDirection", emMagnetDirection, nLevel + 1);
// CFace
if (Face != null)
{
Face.writeObject(writeStream, nLevel + 1);
}
writeFile.writeEndLine(writeStream, "Magnet", nLevel);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return(false);
}
return(true);
}
public void selectArc(CPoint selectPoint)
{
string strCommand;
try
{
/// nodes, segments, arcsegments, blocks, group
strCommand = "mi_seteditmode(\"arcsegments\")";
sendCommand(strCommand);
strCommand = "mi_selectarcsegment(" + selectPoint.X + "," + selectPoint.Y + ")";
sendCommand(strCommand);
/// editmode 를 group 으로 바꾸어서 FEMM 마우스 동작을 막는다.
/// - refreshView() 전에 실행해야 한다.
lockEdit();
/// refresh 를 꼭 해야 색상이 변한다
refreshView();
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
public CScriptFEMM()
{
try
{
m_strBC = "\"" + "BC" + "\"";
string strCommand;
/// FEMM 이 실행되지 않은 상태에서 sendCommand 만 호출하면 FEMM 이 실행된다.
/// 그런데 newdocument(0) 란 명령어로 FEMM 을 실행 시키면 실행과 동시에 Document 가 만들어질 때 문제가 발생한다.
/// 이를 해결하기 위해서 아래와 같이 FEMM 프로세스를 먼저 호출하고 Document 를 연다
CProgramFEMM.loadProcessOfFEMM();
// 스크립트 생성과 동시에 전자기장 모델를 시작한다.
strCommand = "newdocument(0)";
sendCommand(strCommand);
strCommand = "mi_probdef(0,\"millimeters\",\"axi\")";
sendCommand(strCommand);
//strCommand = "mi_setgrid(0.5,\"cart\")";
strCommand = "mi_hidegrid()";
sendCommand(strCommand);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
public static void showFEMM()
{
try
{
Process[] processList = Process.GetProcessesByName("femm");
if (processList.Length > 1)
{
CNotice.noticeWarningID("OOFP");
return;
}
if (processList.Length != 1)
{
return;
}
Process femmProcess = processList[0];
Thread.Sleep(100);
// 윈도우가 최소화 되어 있다면 활성화 시킨다
ShowWindowAsync(femmProcess.MainWindowHandle, SW_SHOWNORMAL);
// 윈도우에 포커스를 줘서 최상위로 만든다
SetForegroundWindow(femmProcess.MainWindowHandle);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
public static void moveFEMM(int iPosX, int iPosY, int iSizeX = 500, int iSizeY = 900)
{
try
{
Process[] processList = Process.GetProcessesByName("femm");
if (processList.Length > 1)
{
CNotice.noticeWarningID("OOFP");
return;
}
if (processList.Length != 1)
{
return;
}
Process femmProcess = processList[0];
Thread.Sleep(100);
MoveWindow(femmProcess.MainWindowHandle, iPosX, iPosY, iSizeX, iSizeY, true);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
public bool saveSettingToFile()
{
string strAppDataPath = Environment.GetEnvironmentVariable("APPDATA");
string strSettingFilePath = Path.Combine(strAppDataPath, "DoSA-2D");
string strSettingFileFullName = Path.Combine(strSettingFilePath, "setting.ini");
try
{
XmlSerializer xmlSerializer = new XmlSerializer(typeof(CSettingDataClone));
StreamWriter writer = new StreamWriter(strSettingFileFullName);
// Static 객체는 XML Serialize 가 불가능해서 일반 Clone 객체에 복사를 하고 Serialize 를 하고 있다.
CSettingDataClone settingData = new CSettingDataClone();
settingData.copySettingDataToClone();
xmlSerializer.Serialize(writer, settingData);
writer.Close();
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
}
return(true);
}
public void saveAs(string strTestFullName)
{
string strCommand;
try
{
//-------------------------------------------------------------
// 아주 중요
//-------------------------------------------------------------
//
// 디렉토리에 들어있는 \\ 기호는 FEMM 에서 인식하지 못한다.
// 따라서 디렉토리안의 \\ 기호를 / 기호로 변경한다
strTestFullName = strTestFullName.Replace("\\", "/");
//-------------------------------------------------------------
strTestFullName = "\"" + strTestFullName + "\"";
strCommand = "mi_saveas(" + strTestFullName + ")";
sendCommand(strCommand);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
public static bool loadProcessOfFEMM()
{
try
{
if (checkFEMMInMemory() != true)
{
m_FEMM = new ActiveFEMMClass();
if (m_FEMM == null)
{
return(false);
}
else
{
return(true);
}
}
return(true);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return(false);
}
}
public void openDesign(string strTestFullName)
{
string strCommand;
//-------------------------------------------------------------
// 아주 중요
//-------------------------------------------------------------
//
// 디렉토리에 들어있는 \\ 기호는 FEMM 에서 인식하지 못한다.
// 따라서 디렉토리안의 \\ 기호를 / 기호로 변경한다
strTestFullName = strTestFullName.Replace("\\", "/");
//-------------------------------------------------------------
strTestFullName = "\"" + strTestFullName + "\"";
try
{
/// nodes, segments, arcsegments, blocks, group
strCommand = "open(" + strTestFullName + ")";
sendCommand(strCommand);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
/// <summary>
/// 그룹 선택을 통해 모든 객체들을 삭제한다.
/// </summary>
public void deleteAll()
{
string strCommand;
try
{
/// 기본 그룹을 삭제한다.
strCommand = "mi_selectgroup(" + 0.ToString() + ")";
sendCommand(strCommand);
strCommand = "mi_deleteselected()";
sendCommand(strCommand);
/// 이동 그룹을 삭제한다.
strCommand = "mi_selectgroup(" + MOVING_GROUP_NUM.ToString() + ")";
sendCommand(strCommand);
strCommand = "mi_deleteselected()";
sendCommand(strCommand);
refreshView();
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
private void buttonHomepage_Click(object sender, EventArgs e)
{
string target;
if (CSettingData.m_emLanguage == EMLanguage.Korean)
{
target = "https://solenoid.or.kr/index_dosa_open_2d_kor.html";
}
else
{
target = "https://solenoid.or.kr/index_dosa_open_2d_eng.html";
}
try
{
System.Diagnostics.Process.Start(target);
}
catch (System.ComponentModel.Win32Exception noBrowser)
{
if (noBrowser.ErrorCode == -2147467259)
{
CNotice.printLog(noBrowser.Message);
}
}
catch (System.Exception other)
{
CNotice.printLog(other.Message);
}
}
public void drawArc(double x1, double y1, double x2, double y2, bool bDirectionArcBackword, EMMoving emMoving = EMMoving.FIXED)
{
string strCommand;
float fX1, fY1, fX2, fY2;
fX1 = (float)x1;
fY1 = (float)y1;
fX2 = (float)x2;
fY2 = (float)y2;
try
{
strCommand = "mi_addnode(" + fX1.ToString() + "," + fY1.ToString() + ")";
sendCommand(strCommand);
strCommand = "mi_addnode(" + fX2.ToString() + "," + fY2.ToString() + ")";
sendCommand(strCommand);
if (bDirectionArcBackword == true)
{
strCommand = "mi_addarc(" + fX2.ToString() + "," + fY2.ToString() + "," + fX1.ToString() + "," + fY1.ToString() + "," + "90, 1)";
sendCommand(strCommand);
}
else
{
strCommand = "mi_addarc(" + fX1.ToString() + "," + fY1.ToString() + "," + fX2.ToString() + "," + fY2.ToString() + "," + "90, 1)";
sendCommand(strCommand);
}
/// 그룹을 지정하는 경우만 변경을 한다.
if (emMoving == EMMoving.MOVING)
{
/// 그룹 설정
/// - Point 의 선택이 좌표계산 없이 바로 가능함
/// - 또한 Point 만 그룹을 지정해도 이동이 가능하기 때문에 Point 만 설정함
strCommand = "mi_selectnode(" + fX1.ToString() + "," + fY1.ToString() + ")";
sendCommand(strCommand);
strCommand = "mi_selectnode(" + fX2.ToString() + "," + fY2.ToString() + ")";
sendCommand(strCommand);
strCommand = "mi_setgroup(" + MOVING_GROUP_NUM.ToString() + ")";
sendCommand(strCommand);
strCommand = "mi_clearselected()";
sendCommand(strCommand);
}
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
public void setBlockProp(CPoint point,
string strMaterial,
double dMeshsize,
string strCircuit,
double dMagnetAngle,
EMMoving emMoving,
int nTurns)
{
string strCommand;
try
{
/// mode 변경 없이도 동작은 한다.
strCommand = "mi_seteditmode(\"blocks\")";
sendCommand(strCommand);
strCommand = "mi_addblocklabel(" + point.X + "," + point.Y + ")";
sendCommand(strCommand);
strCommand = "mi_selectlabel(" + point.X + "," + point.Y + ")";
sendCommand(strCommand);
int nGroup;
if (emMoving == EMMoving.MOVING)
{
nGroup = MOVING_GROUP_NUM;
}
else
{
nGroup = 0;
}
strMaterial = "\"" + strMaterial + "\"";
strCircuit = "\"" + strCircuit + "\"";
strCommand = "mi_setblockprop(" + strMaterial
+ ",0," + dMeshsize.ToString() + "," + strCircuit
+ "," + dMagnetAngle.ToString() + ","
+ nGroup.ToString() + "," + nTurns.ToString() + ")";
sendCommand(strCommand);
strCommand = "mi_clearselected()";
sendCommand(strCommand);
// editmode 를 group 으로 바꾸어서 FEMM 마우스 동작을 막는다.
lockEdit();
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
// 파일스트림 객체에 코일 정보를 기록한다.
// override 를 꼭 사용해야 가상함수가 아니라 현 함수가 호출된다.
public override bool writeObject(StreamWriter writeStream, int nLevel)
{
try
{
CWriteFile writeFile = new CWriteFile();
writeFile.writeBeginLine(writeStream, "Coil", nLevel);
// CNode
writeFile.writeDataLine(writeStream, "NodeName", NodeName, nLevel + 1);
writeFile.writeDataLine(writeStream, "KindKey", KindKey, nLevel + 1);
// CParts
writeFile.writeDataLine(writeStream, "MovingParts", MovingPart, nLevel + 1);
// CCoil
writeFile.writeDataLine(writeStream, "Material", MaterialName, nLevel + 1);
writeFile.writeDataLine(writeStream, "CurrentDirection", CurrentDirection, nLevel + 1);
writeFile.writeDataLine(writeStream, "Turns", Turns, nLevel + 1);
writeFile.writeDataLine(writeStream, "Resistance", Resistance, nLevel + 1);
writeFile.writeDataLine(writeStream, "Resistance_20", Resistance_20, nLevel + 1);
writeFile.writeDataLine(writeStream, "Layers", Layers, nLevel + 1);
writeFile.writeDataLine(writeStream, "TurnsOfOneLayer", TurnsOfOneLayer, nLevel + 1);
writeFile.writeDataLine(writeStream, "CoilWireGrade", CoilWireGrade, nLevel + 1);
writeFile.writeDataLine(writeStream, "InnerDiameter", InnerDiameter, nLevel + 1);
writeFile.writeDataLine(writeStream, "OuterDiameter", OuterDiameter, nLevel + 1);
writeFile.writeDataLine(writeStream, "Height", Height, nLevel + 1);
writeFile.writeDataLine(writeStream, "CopperDiameter", CopperDiameter, nLevel + 1);
writeFile.writeDataLine(writeStream, "WireDiameter", WireDiameter, nLevel + 1);
writeFile.writeDataLine(writeStream, "Temperature", Temperature, nLevel + 1);
writeFile.writeDataLine(writeStream, "HorizontalCoefficient", HorizontalCoefficient, nLevel + 1);
writeFile.writeDataLine(writeStream, "VerticalCoefficient", VerticalCoefficient, nLevel + 1);
writeFile.writeDataLine(writeStream, "ResistanceCoefficient", ResistanceCoefficient, nLevel + 1);
// CFace
if (Face != null)
{
Face.writeObject(writeStream, nLevel + 1);
}
writeFile.writeEndLine(writeStream, "Coil", nLevel);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return(false);
}
return(true);
}
/// <summary>
/// Point Control 은 추가나 삭제가 가능하다.
/// 따라서 각 Point Control 의 순번을 List 안에서의 번호를 일치시킨다.
///
/// 추가나 삭제때 꼭 호출이 되어야 한다.
/// (단, 추가는 마지막 Point Control 에서만 이루어지도록 해서 순서 변경이 없도록 하였다)
/// </summary>
private void resetSequence()
{
try
{
for (int i = 0; i < this.panelPointControl.Controls.Count; i++)
{
((CPointUI)this.panelPointControl.Controls[i]).Sequence = this.panelPointControl.Controls.Count - i;
}
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
}
}
internal void restoreMainWindow()
{
string strCommand;
try
{
strCommand = "main_restore()";
sendCommand(strCommand);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
public void uploadSettingData()
{
try
{
textBoxWorkingDirectory.Text = CSettingData.m_strBaseWorkingDirPath;
textBoxFemmPath.Text = CSettingData.m_strFemmExeFileFullName;
textBoxMeshSizePercent.Text = CSettingData.m_dMeshLevelPercent.ToString();
comboBoxLanguage.Text = CSettingData.m_emLanguage.ToString();
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
}
}
private void downloadSettingData()
{
try
{
CSettingData.m_strBaseWorkingDirPath = textBoxWorkingDirectory.Text;
CSettingData.m_strFemmExeFileFullName = textBoxFemmPath.Text;
CSettingData.m_dMeshLevelPercent = Double.Parse(textBoxMeshSizePercent.Text);
CSettingData.m_emLanguage = (EMLanguage)Enum.Parse(typeof(EMLanguage), comboBoxLanguage.Text);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
}
}
public void addBoundaryConditon()
{
string strCommand;
try
{
strCommand = "mi_addboundprop(" + m_strBC + ",0,0,0,0,0,0,0,0,3)";
sendCommand(strCommand);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
public static bool checkPreviousFEMM()
{
try
{
// FEMM 설치 메인 디렉토리를 얻어낸다.
string strFEMMDirName = Path.GetDirectoryName(CSettingData.m_strFemmExeFileFullName);
strFEMMDirName = strFEMMDirName.Remove(strFEMMDirName.IndexOf("bin"));
// readme.txt 의 첫 줄을 읽어낸다.
string strReadmeFileFullName = Path.Combine(strFEMMDirName, "readme.txt");
CReadFile readFile = new CReadFile();
string strVersionFEMM = readFile.getLine(strReadmeFileFullName, 1); // 내용 : FEMM 4.2 12Jan2016
// readme.txt 에서 FEMM 4.2 버전의 Build 날짜를 읽어낸다.
char[] separators = { ' ' };
string[] strArray;
strArray = strVersionFEMM.Split(separators, StringSplitOptions.None);
string strVersionDate = strArray[2]; // 내용 : 12Jan2016
if (strVersionDate.Length < 9)
{
CNotice.printLogID("TWAP4");
return(false);
}
DateTime currentDataTime = new DateTime();
DateTime limitDataTime = new DateTime();
limitDataTime = Convert.ToDateTime("24Sep2017");
currentDataTime = Convert.ToDateTime(strVersionDate);
// 24Sep2017 보다 이전 버전이면 true 를 리턴한다.
if (currentDataTime < limitDataTime)
{
return(true);
}
else
{
return(false);
}
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return(false);
}
}
public void drawLine(double x1, double y1, double x2, double y2, EMMoving emMoving = EMMoving.FIXED)
{
string strCommand;
float fX1, fY1, fX2, fY2;
fX1 = (float)x1;
fY1 = (float)y1;
fX2 = (float)x2;
fY2 = (float)y2;
try
{
/// Line 을 추가한다
strCommand = "mi_addnode(" + fX1.ToString() + "," + fY1.ToString() + ")";
sendCommand(strCommand);
strCommand = "mi_addnode(" + fX2.ToString() + "," + fY2.ToString() + ")";
sendCommand(strCommand);
strCommand = "mi_addsegment(" + fX1.ToString() + "," + fY1.ToString() + "," + fX2.ToString() + "," + fY2.ToString() + ")";
sendCommand(strCommand);
/// 그룹을 지정하는 경우만 변경을 한다.
if (emMoving == EMMoving.MOVING)
{
/// 그룹 설정
/// - Point 의 선택이 좌표계산 없이 바로 가능함
/// - 또한 Point 만 그룹을 지정해도 이동이 가능하기 때문에 Point 만 설정함
strCommand = "mi_selectnode(" + fX1.ToString() + "," + fY1.ToString() + ")";
sendCommand(strCommand);
strCommand = "mi_selectnode(" + fX2.ToString() + "," + fY2.ToString() + ")";
sendCommand(strCommand);
strCommand = "mi_setgroup(" + MOVING_GROUP_NUM.ToString() + ")";
sendCommand(strCommand);
strCommand = "mi_clearselected()";
sendCommand(strCommand);
}
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
public void refreshView()
{
string strCommand;
try
{
/// refresh 를 꼭 해야 색상이 변한다
strCommand = "mi_refreshview()";
sendCommand(strCommand);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
public void closePost()
{
string strCommand;
try
{
/// refresh 를 꼭 해야 색상이 변한다
strCommand = "mo_close()";
sendCommand(strCommand);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
public void closePre()
{
string strCommand;
try
{
/// nodes, segments, arcsegments, blocks, group
strCommand = "mi_close()";
sendCommand(strCommand);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
public void lockEdit()
{
string strCommand;
// edit 모드를 group 으로 지정해서 마우스 동작을 막는다.
try
{
/// nodes, segments, arcsegments, blocks, group
strCommand = "mi_seteditmode(\"group\")";
sendCommand(strCommand);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
public void addMaterial(string strMaterial)
{
string strCommand;
strMaterial = "\"" + strMaterial + "\"";
try
{
strCommand = "mi_getmaterial(" + strMaterial + ")";
sendCommand(strCommand);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}
public void addCircuitProp(string strCircuit, double dCurrent)
{
string strCommand;
try
{
strCircuit = "\"" + strCircuit + "\"";
// 마지막 파라메타 1 은 Serial 방식으로 추후 Turns 입력이 필요한다.
strCommand = "mi_addcircprop(" + strCircuit + "," + dCurrent.ToString() + ",1)";
sendCommand(strCommand);
}
catch (Exception ex)
{
CNotice.printLog(ex.Message);
return;
}
}