private static DocsPaVO.documento.SignerInfo convertToSignerInfo(DeSign.signer signer)
{
//DeSign.signer signer = signerObj as DeSign.signer;
DocsPaVO.documento.SignerInfo si = new SignerInfo();
int ErrCode;
Int32.TryParse(signer.errorCode, out ErrCode);
byte[] cert = null;
string thumbPrint = string.Empty;
//generazione thumbprint
if (!String.IsNullOrEmpty(signer.certificate))
{
cert = Convert.FromBase64String(signer.certificate.Replace("-----BEGIN CERTIFICATE-----", string.Empty).Replace("-----END CERTIFICATE-----", string.Empty));
thumbPrint = BitConverter.ToString(System.Security.Cryptography.SHA1.Create().ComputeHash(cert)).Replace("-", "");
}
string RevocationStatusDescription = signer.errorMessage;
if (String.IsNullOrEmpty(RevocationStatusDescription))
{
RevocationStatusDescription = "Valido";
}
si.CertificateInfo = new CertificateInfo
{
SerialNumber = signer.serial,
ValidFromDate = convertSimpleDateTime(signer.certNotBefore),
ValidToDate = convertSimpleDateTime(signer.certNotAfter),
IssuerName = "CN=" + signer.issuer.CN,
SubjectName = signer.subject.CN,
RevocationStatus = ErrCode,
RevocationStatusDescription = RevocationStatusDescription,
RevocationDate = convertSimpleDateTime(signer.crlRevocationDate),
SignatureAlgorithm = "N.D.",
ThumbPrint = thumbPrint,
X509Certificate = cert
};
if (si.CertificateInfo.RevocationDate != DateTime.MinValue)
{
si.CertificateInfo.RevocationStatus = 4; //Revocato
}
string codFisc = signer.subject.SER;
if (!string.IsNullOrEmpty(codFisc) && codFisc.Contains(":"))
{
codFisc = codFisc.Split(':')[1];
}
si.SubjectInfo = new SubjectInfo
{
Organizzazione = signer.subject.O,
CommonName = signer.subject.CN,
CodiceFiscale = codFisc,
Nome = signer.subject.GIVEN,
Cognome = signer.subject.SUR,
Country = signer.subject.C,
SerialNumber = signer.serial,
CertId = signer.subject.DNQUALIF
};
si.SignatureAlgorithm = convertOidToString(signer.digestAlgorithm);
/*
* logger.Debug("INSERISCO LE INFORMAZIONI SULLO STATO DELLA FIRMA TEST");
* si.errorCode = signer.errorCode;
* si.errorMessage = signer.errorMessage;
* si.status = signer.status;
*/
if ((signer.signatureTimeStamp != null) && (signer.signatureTimeStamp.timeStampSerial != null) && (signer.signatureTimeStamp.timeStampDate != null))
{
List <TSInfo> tsList = new List <TSInfo>();
TSInfo tsi = new TSInfo
{
dataInizioValiditaCert = convertSimpleDateTime(signer.signatureTimeStamp.certNotBefore),
dataFineValiditaCert = convertSimpleDateTime(signer.signatureTimeStamp.certNotAfter),
TSdateTime = convertSimpleDateTime(signer.signatureTimeStamp.timeStampDate),
TSimprint = signer.signatureTimeStamp.timeStampImprint,
TSANameIssuer = signer.signatureTimeStamp.issuer.CN,
TSANameSubject = signer.signatureTimeStamp.subject.CN,
TSserialNumber = signer.signatureTimeStamp.timeStampSerial,
TSType = TsType.PKCS
};
tsList.Add(tsi);
si.SignatureTimeStampInfo = tsList.ToArray();
}
//controfirmatari
List <SignerInfo> csiLst = new List <SignerInfo>();
foreach (DeSign.countersigner countersigner in signer.countersigner)
{
DocsPaVO.documento.SignerInfo csi = new SignerInfo();
csi.isCountersigner = true;
if (!String.IsNullOrEmpty(countersigner.certificate))
{
cert = Convert.FromBase64String(countersigner.certificate.Replace("-----BEGIN CERTIFICATE-----", string.Empty).Replace("-----END CERTIFICATE-----", string.Empty));
thumbPrint = BitConverter.ToString(System.Security.Cryptography.SHA1.Create().ComputeHash(cert)).Replace("-", "");
}
string csiRevocationStatusDescription = countersigner.errorMessage;
if (String.IsNullOrEmpty(RevocationStatusDescription))
{
RevocationStatusDescription = "Valido";
}
csi.CertificateInfo = new CertificateInfo
{
SerialNumber = countersigner.serial,
ValidFromDate = convertSimpleDateTime(countersigner.certNotBefore),
ValidToDate = convertSimpleDateTime(countersigner.certNotAfter),
IssuerName = "CN=" + countersigner.issuer.CN,
SubjectName = countersigner.subject.CN,
RevocationStatus = ErrCode,
RevocationStatusDescription = RevocationStatusDescription,
RevocationDate = convertSimpleDateTime(countersigner.crlRevocationDate),
SignatureAlgorithm = "N.D.",
ThumbPrint = thumbPrint,
X509Certificate = cert
};
if (csi.CertificateInfo.RevocationDate != DateTime.MinValue)
{
csi.CertificateInfo.RevocationStatus = 4; //Revocato
}
codFisc = countersigner.subject.SER;
if (codFisc.Contains(":"))
{
codFisc = codFisc.Split(':')[1];
}
csi.SubjectInfo = new SubjectInfo
{
Organizzazione = countersigner.subject.O,
CommonName = countersigner.subject.CN,
CodiceFiscale = codFisc,
Nome = countersigner.subject.GIVEN,
Cognome = countersigner.subject.SUR,
Country = countersigner.subject.C,
SerialNumber = countersigner.serial,
CertId = countersigner.subject.DNQUALIF
};
csi.SignatureAlgorithm = convertOidToString(countersigner.digestAlgorithm);
if ((countersigner.signatureTimeStamp != null) && (countersigner.signatureTimeStamp.timeStampSerial != null) && (countersigner.signatureTimeStamp.timeStampDate != null))
{
List <TSInfo> ctsList = new List <TSInfo>();
TSInfo tsi = new TSInfo
{
dataInizioValiditaCert = convertSimpleDateTime(countersigner.signatureTimeStamp.certNotBefore),
dataFineValiditaCert = convertSimpleDateTime(countersigner.signatureTimeStamp.certNotAfter),
TSdateTime = convertSimpleDateTime(countersigner.signatureTimeStamp.timeStampDate),
TSimprint = countersigner.signatureTimeStamp.timeStampImprint,
TSANameIssuer = countersigner.signatureTimeStamp.issuer.CN,
TSANameSubject = countersigner.signatureTimeStamp.subject.CN,
TSserialNumber = countersigner.signatureTimeStamp.timeStampSerial,
TSType = TsType.PKCS
};
ctsList.Add(tsi);
csi.SignatureTimeStampInfo = ctsList.ToArray();
}
csiLst.Add(csi);
}
if (csiLst.Count > 0)
{
si.counterSignatures = csiLst.ToArray();
}
return(si);
}
public static string Convierte(byte[] bytearray_a_convertir)
{
return (BitConverter.ToString(bytearray_a_convertir)).Replace("-", "").ToLower();
}
/// <summary>
/// 字节数组转换为16进制表示的字符串
/// </summary>
private static string ByteArrayToHexString(byte[] buf)
{
return(BitConverter.ToString(buf).Replace("-", ""));
}
static string ToHexString(byte[] bytes)
{
Preconditions.CheckNotNull(bytes);
return(BitConverter.ToString(bytes).Replace("-", string.Empty));
}
/// <summary>
/// MD5加密
/// </summary>
public string MD5Encrypt(string strSource)
{
var mD5CryptoServiceProvider = new MD5CryptoServiceProvider();
return(BitConverter.ToString(mD5CryptoServiceProvider.ComputeHash(Encoding.UTF8.GetBytes(strSource))).Replace("-", "").ToUpper());
}
public override string ToString()
{
return("NetworkReader pos=" + Position + " len=" + Length + " buffer=" + BitConverter.ToString(buffer.Array, buffer.Offset, buffer.Count));
}
public string getDataAsString()
{
return(BitConverter.ToString(getByteArray(2), 0));
}
// note: original HLAPI HandleBytes function handled >1 message in a while loop, but this wasn't necessary
// anymore because NetworkServer/NetworkClient Update both use while loops to handle >1 data events per
// frame already.
// -> in other words, we always receive 1 message per Receive call, never two.
// -> can be tested easily with a 1000ms send delay and then logging amount received in while loops here
// and in NetworkServer/Client Update. HandleBytes already takes exactly one.
/// <summary>
/// This function allows custom network connection classes to process data from the network before it is passed to the application.
/// </summary>
/// <param name="buffer">The data received.</param>
internal void TransportReceive(ArraySegment <byte> buffer, int channelId)
{
// unpack message
using (PooledNetworkReader networkReader = NetworkReaderPool.GetReader(buffer))
{
if (MessagePacker.UnpackMessage(networkReader, out int msgType))
{
// logging
if (logger.LogEnabled())
{
logger.Log("ConnectionRecv " + this + " msgType:" + msgType + " content:" + BitConverter.ToString(buffer.Array, buffer.Offset, buffer.Count));
}
// try to invoke the handler for that message
if (InvokeHandler(msgType, networkReader, channelId))
{
lastMessageTime = Time.time;
}
}
else
{
logger.LogError("Closed connection: " + this + ". Invalid message header.");
Disconnect();
}
}
}
internal static bool VERIFY_Central_File_Config_Hash(string HTTP_File_Path, string Local_File_Path)
{
string HTTPFileHash;
string LocalFileHash;
try
{
ServicePointManager.Expect100Continue = true;
ServicePointManager.CheckCertificateRevocationList = false;
ServicePointManager.SecurityProtocol = SecurityProtocolType.Tls12 | SecurityProtocolType.Tls11 | SecurityProtocolType.Tls | SecurityProtocolType.Ssl3;
using (CustomWebClient response = new CustomWebClient())
{
//string Web_Config_File_Contents = response.DownloadString(HTTP_File_Path);
if (Settings.Central_Config_Hashs.ContainsKey(HTTP_File_Path) == true)//determine if we use cache version
{
HTTPFileHash = Settings.Central_Config_Hashs[HTTP_File_Path];
}
else//no cache version get from network
{
Uri uri = new Uri(HTTP_File_Path);
Central_Config_File_Web_Cache = Crypto_Operation.CONVERT_To_String_From_Bytes(response.DownloadData(uri), 2);//get file has from Network
using (var sha256 = SHA256.Create())
{
HTTPFileHash = BitConverter.ToString(sha256.ComputeHash(Encoding.UTF8.GetBytes(Central_Config_File_Web_Cache)));
}
if (Settings.Central_Config_Hashs.ContainsKey(HTTP_File_Path) == false)
{
Settings.Central_Config_Hashs.Add(HTTP_File_Path, HTTPFileHash);
}
}
using (var sha2562 = SHA256.Create())//Get local file hash
{
if (File_Operation.CHECK_if_File_Exists(Local_File_Path) == false)
{
return(false);//no local file
}
else
{
LocalFileHash = BitConverter.ToString(sha2562.ComputeHash(Encoding.UTF8.GetBytes(File_Operation.READ_AllText(Local_File_Path))));
}
}
if (HTTPFileHash == LocalFileHash)
{
return(true);
}
else
{
return(false);
}
}
}
catch (Exception e)
{
if ((!e.Message.Contains("The operation has timed out") || !e.Message.Contains("The remote name could not be resolved: ")) || (Settings.Logging_Level_To_Report.ToLower() == "informataion" || Settings.Logging_Level_To_Report.ToLower() == "verbose"))
{
Error_Operation.Log_Error("VERIFY_Central_File_Config_Hash()", e.Message.ToString() + " " + HTTP_File_Path + " " + Local_File_Path, e.StackTrace.ToString(), Error_Operation.LogSeverity.Informataion);
}
return(false);
}
finally
{
Wclient.Dispose();
}
}
/// <summary>
/// Decodes information from a broadcast services data packet.
/// </summary>
/// <param name="packet">The teletext packet to be decoded.</param>
private void DecodeBroadcastServiceData(Packet packet)
{
// Get the designation byte
byte designationByte = Decode.Hamming84(packet.Data[0]);
// Check the designation byte does not have unrecoverable errors, and if it does ignore the packet
if (designationByte == 0xff)
{
return;
}
// Decode the designation code and multiplex status
bool multiplexed = Convert.ToBoolean(designationByte & 0x01);
int designation = designationByte >> 1;
// Check the designation code is 0 (format 1) or 1 (format 2), otherwise ignore the packet
if (designation > 1)
{
return;
}
// Set the multiplexed status
Multiplexed = !multiplexed;
// If the packet is format 1, decode the network identification code
if (designation == 0)
{
byte[] networkID = { packet.Data[7], packet.Data[8] };
NetworkID = BitConverter.ToString(networkID).Replace("-", "");
}
// Get the status display
byte[] statusCharacters = new byte[packet.Data.Length - 20];
for (int i = 20; i < packet.Data.Length; i++)
{
statusCharacters[i - 20] = Decode.OddParity(packet.Data[i]);
}
StatusDisplay = Encoding.ASCII.GetString(statusCharacters);
// Decode the digits for the inital page number
byte pageUnits = Decode.Hamming84(packet.Data[1]);
byte pageTens = Decode.Hamming84(packet.Data[2]);
// Decode the bytes for the initial subcode
byte subcode1 = Decode.Hamming84(packet.Data[3]);
byte subcode2 = Decode.Hamming84(packet.Data[4]);
byte subcode3 = Decode.Hamming84(packet.Data[5]);
byte subcode4 = Decode.Hamming84(packet.Data[6]);
// If the subcode bytes containing the magazine number contains errors, stop processing
if (subcode2 == 0xff || subcode4 == 0xff)
{
return;
}
// If the page number digits don't contain errors, set the initial page number
if (pageUnits != 0xff && pageTens != 0xff)
{
// Get the magazine number, changing 0 to 8
byte magazineNumber = (byte)((subcode2 >> 3) | ((subcode4 & 0x0C) >> 1));
if (magazineNumber == 0)
{
magazineNumber = 8;
}
// Set the initial page number
InitialPage = magazineNumber.ToString("X1") + ((pageTens << 4) | pageUnits).ToString("X2");
}
// If the remaining subcode bytes don't contain any errors, set the subcode
if (subcode1 != 0xff && subcode3 != 0xff)
{
byte[] fullSubcode = { (byte)(((subcode4 & 0x03) << 4) | subcode3), (byte)(((subcode2 & 0x07) << 4) | subcode1) };
InitialSubcode = BitConverter.ToString(fullSubcode).Replace("-", "");
}
}
public async Task GetCommandTestGoodContent()
{
var(size, content, messageError) = await client.GetCommand(path + "/TestFile.txt");
Assert.AreEqual("EF-BB-BF-46-69-6C-65-20-66-6F-72-20-74-65-73-74-20-70-72-6F-6A-65-63-74", BitConverter.ToString(content));
server.Stop();
client.Close();
}
public string GetUrlEncodedHash(byte[] value)
{
return("%" + BitConverter.ToString(SHA1.Create().ComputeHash(value)).Replace("-", "%").ToLower());
}
public string GetHash(byte[] value)
{
return(BitConverter.ToString(SHA1.Create().ComputeHash(value)).Replace("-", ""));
}
public void Render()
{
// TO DO: REWRITE THIS CLASS! and maybe the whole process of
// getting data from the lower classes, why convert buffers
// to XML just to convert them again in this Render method?
// ALSO: this conversion process does not take into account that
// the XML data that this class is converted from might
// contain more than _CX characters in a line, since the
// previous conversion to XML converts '<' to "<" and
// the like, which will also cause shifts in character positions.
//
// Reset cache
//
_stringValueCache = null;
//
if (_CX == 0 || _CY == 0)
{
// TODO: Need to fix this
_CX = 132;
_CY = 43;
}
// CFCJr 2008/07/11
if (_CX < 80)
{
_CX = 80;
}
if (_CY < 25)
{
_CY = 25;
}
// CFCJr 2008/07/11
if (_CX < 80)
{
_CX = 80;
}
if (_CY < 25)
{
_CY = 25;
}
UserIdentified = null;
MatchListIdentified = null;
//
// Render text image of screen
//
//
mScreenBuffer = new char[_CX * _CY];
mScreenRows = new string[_CY];
// CFCJr 2008/07/11
// The following might be much faster:
//
// string str = "".PadRight(_CX*_CY, ' ');
// mScreenBuffer = str.ToCharArray();
// ........do operations on mScreenBuffer to fill it......
// str = string.FromCharArray(mScreenBuffer);
// for (int r = 0; r < _CY; r++)
// mScreenRows[i] = str.SubString(r*_CY,_CX);
//
// ie, fill mScreenBuffer with the data from Unformatted and Field, then
// create str (for the hash) and mScreenRows[]
// with the result.
int i;
for (i = 0; i < mScreenBuffer.Length; i++) // CFCJr. 2008.07/11 replase _CX*CY with mScreenBuffer.Length
{
mScreenBuffer[i] = ' ';
}
//
int chindex;
if (Field == null || Field.Length == 0 &&
(Unformatted == null || Unformatted.Text == null))
{
if ((Unformatted == null || Unformatted.Text == null))
{
Console.WriteLine("XMLScreen:Render: **BUGBUG** XMLScreen.Unformatted screen is blank");
}
else
{
Console.WriteLine("XMLScreen:Render: **BUGBUG** XMLScreen.Field is blank");
}
Console.Out.Flush();
// CFCJr. Move logic for what is in mScreenRows to seperate if logic
// this will give unformatted results even if Field==null or 0 length
// and vise-a-versa.
/*
* for (i=0; i<mScreenRows.Length; i++)
* {
* mScreenRows[i] = new String(' ',_CX);
* }
*/
}
string blankRow = string.Empty;
blankRow = blankRow.PadRight(_CX, ' ');
if ((Unformatted == null || Unformatted.Text == null))
{
// CFCJr. 2008/07/11 initilize a blank row of _CX (80?) spaces
for (i = 0; i < mScreenRows.Length; i++)
{
//mScreenRows[i] = " ".Substring(0, _CX);
// CFCJr. 2008/07/11 replace above method of 80 spaces with following
mScreenRows[i] = blankRow;
}
}
else
{
for (i = 0; i < Unformatted.Text.Length; i++)
{
string text = Unformatted.Text[i];
// CFCJr, make sure text is not null
if (string.IsNullOrEmpty(text))
{
text = string.Empty;
}
// CFCJr, replace "<" with '<'
text = text.Replace("<", "<");
// CFCJr, Remove this loop to pad text
// and use text.PadRight later.
// This will help in not processing more
// characters than necessary into mScreenBuffer
// below
//while (text.Length < _CX)
// text+=" ";
//
int p;
//for (p=0; p<_CX; p++)
for (p = 0; p < text.Length; p++) // CFC,Jr.
{
if (text[p] < 32 || text[p] > 126)
{
text = text.Replace(text[p], ' ');
}
}
//
//for (chindex=0; chindex<Unformatted.Text[i].Length; chindex++)
// CFCJr, 2008/07/11 use text.length instead of Unformatted.Text[i].Length
// since we only pad text with 80 chars but if Unformatted.Text[i]
// contains XML codes (ie, "<") then it could be longer than
// 80 chars (hence, longer than text).
// Also, I replace "<" above with "<".
for (chindex = 0; chindex < text.Length; chindex++)
{
// CFCJr, calculate mScreenBuffer index only once
int bufNdx = chindex + (i * _CX);
if (bufNdx < mScreenBuffer.Length)
{
mScreenBuffer[bufNdx] = text[chindex];
}
}
// CFCJr, make sure we don't overflow the index of mScreenRows
// since i is based on the dimensions of Unformatted.Text
// instead of mScreenRows.Length
if (i < mScreenRows.Length)
{
text = text.PadRight(_CX, ' '); // CFCJr. 2008/07/11 use PadRight instead of loop above
mScreenRows[i] = text;
}
}
}
// CFCJr, lets make sure we have _CY rows in mScreenRows here
// since we use Unformated.Text.Length for loop above which
// could possibly be less than _CY.
for (i = 0; i < mScreenRows.Length; i++)
{
if (string.IsNullOrEmpty(mScreenRows[i]))
{
mScreenRows[i] = blankRow;
}
}
//==============
// Now process the Field (s)
if (Field != null && Field.Length > 0)
{
//
// Now superimpose the formatted fields on the unformatted base
//
for (i = 0; i < Field.Length; i++)
{
XMLScreenField field = Field[i];
if (field.Text != null)
{
for (chindex = 0; chindex < field.Text.Length; chindex++)
{
char ch = field.Text[chindex];
if (ch < 32 || ch > 126)
{
ch = ' ';
}
// CFCJr, 2008/07/11 make sure we don't get out of bounds
// of the array m_ScreenBuffer.
int bufNdx = chindex + field.Location.left + field.Location.top * _CX;
if (bufNdx >= 0 && bufNdx < mScreenBuffer.Length)
{
mScreenBuffer[bufNdx] = ch;
}
}
}
}
// CFCJr, 2008/07/11
// SOMETHING needs to be done in this method to speed things up.
// Above, in the processing of the Unformatted.Text, Render()
// goes to the trouble of loading up mScreenBuffer and mScreenRows.
// now here, we replace mScreenRows with the contents of mScreenBuffer.
// Maybe, we should only load mScreenBuffer and then at the end
// of Render(), load mScreenRows from it (or vise-a-vera).
// WE COULD ALSO use
// mScreenRows[i] = string.FromCharArraySubset(mScreenBuffer, i*_CX, _CX);
// inside this loop.
for (i = 0; i < _CY; i++)
{
string temp = string.Empty; // CFCJr, 2008/07/11 replace ""
for (int j = 0; j < _CX; j++)
{
temp += mScreenBuffer[i * _CX + j];
}
mScreenRows[i] = temp;
}
}
// now calculate our screen's hash
//
// CFCJr, dang, now we're going to copy the data again,
// this time into a long string.....(see comments at top of Render())
// I bet there's a easy way to redo this class so that we use just
// one buffer (string or char[]) instead of all these buffers.
// WE COULD also use
// string hashStr = string.FromCharArray(mScreenBuffer);
// instead of converting mScreenRows to StringBuilder
// and then converting it to a string.
HashAlgorithm hash = (HashAlgorithm)CryptoConfig.CreateFromName("MD5");
StringBuilder builder = new StringBuilder();
for (i = 0; i < mScreenRows.Length; i++)
{
builder.Append(mScreenRows[i]);
}
byte[] myHash = hash.ComputeHash(new UnicodeEncoding().GetBytes(builder.ToString()));
this.Hash = BitConverter.ToString(myHash);
this._ScreenGuid = Guid.NewGuid();
}
/// \brief Reads and interprets data reported by the Wii Remote.
/// \return On success, > 0, < 0 on failure, 0 if nothing has been recieved.
///
/// Wii Remote reads function similarly to a Queue, in FIFO (first in, first out) order.
/// For example, if two reports were sent since the last \c ReadWiimoteData() call,
/// this call will only read and interpret the first of those two (and "pop" it off
/// of the queue). So, in order to make sure you don't fall behind the Wiimote's update
/// frequency, you can do something like this (in a game loop for example):
///
/// \code
/// Wii Remote wiimote;
/// int ret;
/// do
/// {
/// ret = wiimote.ReadWiimoteData();
/// } while (ret > 0);
/// \endcode
public int ReadWiimoteData()
{
byte[] buf = new byte[22];
int status = WiimoteManager.RecieveRaw(hidapi_handle, buf);
if (status <= 0)
{
return(status); // Either there is some sort of error or we haven't recieved anything
}
int typesize = GetInputDataTypeSize((InputDataType)buf[0]);
byte[] data = new byte[typesize];
for (int x = 0; x < data.Length; x++)
{
data[x] = buf[x + 1];
}
if (WiimoteManager.Debug_Messages)
{
Debug.Log("Recieved: [" + buf[0].ToString("X").PadLeft(2, '0') + "] " + BitConverter.ToString(data));
}
// Variable names used throughout the switch/case block
byte[] buttons;
byte[] accel;
byte[] ext = null;
byte[] ir;
switch ((InputDataType)buf[0]) // buf[0] is the output ID byte
{
case InputDataType.STATUS_INFO: // done.
buttons = new byte[] { data[0], data[1] };
byte flags = data[2];
byte battery_level = data[5];
Button.InterpretData(buttons);
bool old_ext_connected = Status.ext_connected;
byte[] total = new byte[] { flags, battery_level };
Status.InterpretData(total);
if (expecting_status_report)
{
expecting_status_report = false;
}
else // We haven't requested any data report type, meaning a controller has connected.
{
SendDataReportMode(last_report_type); // If we don't update the data report mode, no updates will be sent
}
if (Status.ext_connected != old_ext_connected && Type != WiimoteType.PROCONTROLLER)
{
if (Status.ext_connected) // The Wii Remote doesn't allow reading from the extension identifier
{ // when nothing is connected.
Debug.Log("An extension has been connected.");
if (current_ext != ExtensionController.MOTIONPLUS)
{
ActivateExtension();
RequestIdentifyExtension(); // Identify what extension was connected.
}
else
{
ExpectingWiiMotionPlusSwitch = false;
}
}
else
{
if (!ExpectingWiiMotionPlusSwitch)
{
_current_ext = ExtensionController.NONE;
}
Debug.Log("An extension has been disconnected.");
}
}
break;
case InputDataType.READ_MEMORY_REGISTERS: // done.
buttons = new byte[] { data[0], data[1] };
Button.InterpretData(buttons);
if (CurrentReadData == null)
{
Debug.LogWarning("Recived Register Read Report when none was expected. Ignoring.");
return(status);
}
byte size = (byte)((data[2] >> 4) + 0x01);
byte error = (byte)(data[2] & 0x0f);
// Error 0x07 means reading from a write-only register
// Offset 0xa600fa is for the Wii Motion Plus. This error code can be expected behavior in this case.
if (error == 0x07)
{
if (CurrentReadData.Offset != 0xa600fa)
{
Debug.LogError("Wiimote reports Read Register error 7: Attempting to read from a write-only register (" + CurrentReadData.Offset.ToString("x") + "). Aborting read.");
}
CurrentReadData = null;
return(status);
}
// lowOffset is reversed because the Wii Remote reports are in Big Endian order
ushort lowOffset = BitConverter.ToUInt16(new byte[] { data[4], data[3] }, 0);
ushort expected = (ushort)CurrentReadData.ExpectedOffset;
if (expected != lowOffset)
{
Debug.LogWarning("Expected Register Read Offset (" + expected + ") does not match reported offset from Wii Remote (" + lowOffset + ")");
}
byte[] read = new byte[size];
for (int x = 0; x < size; x++)
{
read[x] = data[x + 5];
}
CurrentReadData.AppendData(read);
if (CurrentReadData.ExpectedOffset >= CurrentReadData.Offset + CurrentReadData.Size)
{
CurrentReadData = null;
}
break;
case InputDataType.ACKNOWLEDGE_OUTPUT_REPORT:
buttons = new byte[] { data[0], data[1] };
Button.InterpretData(buttons);
// TODO: doesn't do any actual error handling, or do any special code about acknowledging the output report.
break;
case InputDataType.REPORT_BUTTONS: // done.
buttons = new byte[] { data[0], data[1] };
Button.InterpretData(buttons);
break;
case InputDataType.REPORT_BUTTONS_ACCEL: // done.
buttons = new byte[] { data[0], data[1] };
Button.InterpretData(buttons);
accel = new byte[] { data[0], data[1], data[2], data[3], data[4] };
Accel.InterpretData(accel);
break;
case InputDataType.REPORT_BUTTONS_EXT8: // done.
buttons = new byte[] { data[0], data[1] };
Button.InterpretData(buttons);
ext = new byte[8];
for (int x = 0; x < ext.Length; x++)
{
ext[x] = data[x + 2];
}
if (_Extension != null)
{
_Extension.InterpretData(ext);
}
break;
case InputDataType.REPORT_BUTTONS_ACCEL_IR12: // done.
buttons = new byte[] { data[0], data[1] };
Button.InterpretData(buttons);
accel = new byte[] { data[0], data[1], data[2], data[3], data[4] };
Accel.InterpretData(accel);
ir = new byte[12];
for (int x = 0; x < 12; x++)
{
ir[x] = data[x + 5];
}
Ir.InterpretData(ir);
break;
case InputDataType.REPORT_BUTTONS_EXT19: // done.
buttons = new byte[] { data[0], data[1] };
Button.InterpretData(buttons);
ext = new byte[19];
for (int x = 0; x < ext.Length; x++)
{
ext[x] = data[x + 2];
}
if (_Extension != null)
{
_Extension.InterpretData(ext);
}
break;
case InputDataType.REPORT_BUTTONS_ACCEL_EXT16: // done.
buttons = new byte[] { data[0], data[1] };
Button.InterpretData(buttons);
accel = new byte[] { data[0], data[1], data[2], data[3], data[4] };
Accel.InterpretData(accel);
ext = new byte[16];
for (int x = 0; x < ext.Length; x++)
{
ext[x] = data[x + 5];
}
if (_Extension != null)
{
_Extension.InterpretData(ext);
}
break;
case InputDataType.REPORT_BUTTONS_IR10_EXT9: // done.
buttons = new byte[] { data[0], data[1] };
Button.InterpretData(buttons);
ir = new byte[10];
for (int x = 0; x < 10; x++)
{
ir[x] = data[x + 2];
}
Ir.InterpretData(ir);
ext = new byte[9];
for (int x = 0; x < 9; x++)
{
ext[x] = data[x + 12];
}
if (_Extension != null)
{
_Extension.InterpretData(ext);
}
break;
case InputDataType.REPORT_BUTTONS_ACCEL_IR10_EXT6: // done.
buttons = new byte[] { data[0], data[1] };
Button.InterpretData(buttons);
accel = new byte[] { data[0], data[1], data[2], data[3], data[4] };
Accel.InterpretData(accel);
ir = new byte[10];
for (int x = 0; x < 10; x++)
{
ir[x] = data[x + 5];
}
Ir.InterpretData(ir);
ext = new byte[6];
for (int x = 0; x < 6; x++)
{
ext[x] = data[x + 15];
}
if (_Extension != null)
{
_Extension.InterpretData(ext);
}
break;
case InputDataType.REPORT_EXT21: // done.
ext = new byte[21];
for (int x = 0; x < ext.Length; x++)
{
ext[x] = data[x];
}
if (_Extension != null)
{
_Extension.InterpretData(ext);
}
break;
case InputDataType.REPORT_INTERLEAVED:
if (!ExpectingSecondInterleavedPacket)
{
ExpectingSecondInterleavedPacket = true;
InterleavedDataBuffer = data;
}
else if (WiimoteManager.Debug_Messages)
{
Debug.LogWarning(
"Recieved two REPORT_INTERLEAVED (" + InputDataType.REPORT_INTERLEAVED.ToString("x") + ") reports in a row! "
+ "Expected REPORT_INTERLEAVED_ALT (" + InputDataType.REPORT_INTERLEAVED_ALT.ToString("x") + "). Ignoring!"
);
}
break;
case InputDataType.REPORT_INTERLEAVED_ALT:
if (ExpectingSecondInterleavedPacket)
{
ExpectingSecondInterleavedPacket = false;
buttons = new byte[] { data[0], data[1] };
Button.InterpretData(buttons);
byte[] ir1 = new byte[18];
byte[] ir2 = new byte[18];
for (int x = 0; x < 18; x++)
{
ir1[x] = InterleavedDataBuffer[x + 3];
ir2[x] = data[x + 3];
}
Ir.InterpretDataInterleaved(ir1, ir2);
Accel.InterpretDataInterleaved(InterleavedDataBuffer, data);
}
else if (WiimoteManager.Debug_Messages)
{
Debug.LogWarning(
"Recieved two REPORT_INTERLEAVED_ALT (" + InputDataType.REPORT_INTERLEAVED_ALT.ToString("x") + ") reports in a row! "
+ "Expected REPORT_INTERLEAVED (" + InputDataType.REPORT_INTERLEAVED.ToString("x") + "). Ignoring!"
);
}
break;
}
if (ext == null)
{
_RawExtension = null;
}
else
{
_RawExtension = new ReadOnlyArray <byte>(ext);
}
return(status);
}
/// <summary>
/// Post process payment (used by payment gateways that require redirecting to a third-party URL)
/// </summary>
/// <param name="postProcessPaymentRequest">Payment info required for an order processing</param>
public void PostProcessPayment(PostProcessPaymentRequest postProcessPaymentRequest)
{
//Notificación On-Line
var strDs_Merchant_MerchantURL = _webHelper.GetStoreLocation(false) + "Plugins/PaymentSermepa/Return";
//URL OK
var strDs_Merchant_UrlOK = _webHelper.GetStoreLocation(false) + "checkout/completed";
//URL KO
var strDs_Merchant_UrlKO = _webHelper.GetStoreLocation(false) + "Plugins/PaymentSermepa/Error";
//Numero de pedido
//You have to change the id of the orders table to begin with a number of at least 4 digits.
var strDs_Merchant_Order = postProcessPaymentRequest.Order.Id.ToString("0000");
//Nombre del comercio
var strDs_Merchant_MerchantName = _sermepaPaymentSettings.NombreComercio;
//Importe
var amount = ((int)Convert.ToInt64(postProcessPaymentRequest.Order.OrderTotal * 100)).ToString();
var strDs_Merchant_Amount = amount;
//Código de comercio
var strDs_Merchant_MerchantCode = _sermepaPaymentSettings.FUC;
//Moneda
var strDs_Merchant_Currency = _sermepaPaymentSettings.Moneda;
//Terminal
var strDs_Merchant_Terminal = _sermepaPaymentSettings.Terminal;
//Tipo de transaccion (0 - Autorización)
var strDs_Merchant_TransactionType = "0";
//Clave
var clave = _sermepaPaymentSettings.Pruebas ? _sermepaPaymentSettings.ClavePruebas : _sermepaPaymentSettings.ClaveReal;
//Calculo de la firma
var sha = string.Format("{0}{1}{2}{3}{4}{5}{6}",
strDs_Merchant_Amount,
strDs_Merchant_Order,
strDs_Merchant_MerchantCode,
strDs_Merchant_Currency,
strDs_Merchant_TransactionType,
strDs_Merchant_MerchantURL,
clave);
SHA1 shaM = new SHA1Managed();
var shaResult = shaM.ComputeHash(Encoding.Default.GetBytes(sha));
var shaResultStr = BitConverter.ToString(shaResult).Replace("-", "");
//Creamos el POST
var remotePostHelper = new RemotePost
{
FormName = "form1",
Url = GetSermepaUrl()
};
remotePostHelper.Add("Ds_Merchant_Amount", strDs_Merchant_Amount);
remotePostHelper.Add("Ds_Merchant_Currency", strDs_Merchant_Currency);
remotePostHelper.Add("Ds_Merchant_Order", strDs_Merchant_Order);
remotePostHelper.Add("Ds_Merchant_MerchantCode", strDs_Merchant_MerchantCode);
remotePostHelper.Add("Ds_Merchant_TransactionType", strDs_Merchant_TransactionType);
remotePostHelper.Add("Ds_Merchant_MerchantURL", strDs_Merchant_MerchantURL);
remotePostHelper.Add("Ds_Merchant_MerchantSignature", shaResultStr);
remotePostHelper.Add("Ds_Merchant_Terminal", strDs_Merchant_Terminal);
remotePostHelper.Add("Ds_Merchant_MerchantName", strDs_Merchant_MerchantName);
remotePostHelper.Add("Ds_Merchant_UrlOK", strDs_Merchant_UrlOK);
remotePostHelper.Add("Ds_Merchant_UrlKO", strDs_Merchant_UrlKO);
remotePostHelper.Post();
}
public static string ByteArrayToString(byte[] bytes)
{
return(BitConverter.ToString(bytes).Replace("-", ""));
}
public static void Main()
{
#if NETDUINO3_WIFI
// Arduino D7->PD7
int chipSelectPinNumber = PinNumber('A', 1);
#endif
Debug.WriteLine("devMobile.IoT.nRf24L01.ModuleSPI starting");
Debug.WriteLine(Windows.Devices.Spi.SpiDevice.GetDeviceSelector());
try
{
GpioController gpioController = GpioController.GetDefault();
var settings = new SpiConnectionSettings(chipSelectPinNumber)
{
ClockFrequency = 2000000,
Mode = SpiMode.Mode0,
SharingMode = SpiSharingMode.Shared,
};
using (SpiDevice device = SpiDevice.FromId(SpiBusId, settings))
{
Debug.WriteLine("nrf24L01Device Device...");
if (device == null)
{
Debug.WriteLine("nrf24L01Device == null");
}
Thread.Sleep(100);
Debug.WriteLine("ConfigureSpiPort Done...");
Debug.WriteLine("");
Thread.Sleep(500);
try
{
// Read the Address width
Debug.WriteLine("Read address width");
byte[] txBuffer1 = new byte[] { SETUP_AW | R_REGISTER, 0x0 };
byte[] rxBuffer1 = new byte[txBuffer1.Length];
Debug.WriteLine(" nrf24L01Device.TransferFullDuplex...SETUP_AW");
Debug.WriteLine(" txBuffer:" + BitConverter.ToString(txBuffer1));
device.TransferFullDuplex(txBuffer1, rxBuffer1);
Debug.WriteLine(" rxBuffer:" + BitConverter.ToString(rxBuffer1));
// Extract then adjust the address width
byte addressWidthValue = rxBuffer1[1];
addressWidthValue &= 0b00000011;
addressWidthValue += 2;
Debug.WriteLine($"Address width 0x{SETUP_AW:x2} - Value 0X{rxBuffer1[1]:x2} Value adjusted {addressWidthValue}");
Debug.WriteLine("");
// Write Pipe0 Receive address
Debug.WriteLine($"Write Pipe0 Receive Address {P0_Address}");
byte[] txBuffer2 = new byte[addressWidthValue + 1];
byte[] rxBuffer2 = new byte[txBuffer2.Length];
txBuffer2[0] = RX_ADDR_P0 | W_REGISTER;
Array.Copy(Encoding.UTF8.GetBytes(P0_Address), 0, txBuffer2, 1, addressWidthValue);
Debug.WriteLine(" nrf24L01Device.Write...RX_ADDR_P0");
Debug.WriteLine(" txBuffer:" + BitConverter.ToString(txBuffer2));
device.TransferFullDuplex(txBuffer2, rxBuffer2);
Debug.WriteLine("");
// Read Pipe0 Receive address
Debug.WriteLine("Read Pipe0 Receive address");
byte[] txBuffer3 = new byte[addressWidthValue + 1];
txBuffer3[0] = RX_ADDR_P0 | R_REGISTER;
byte[] rxBuffer3 = new byte[txBuffer3.Length];
Debug.WriteLine(" nrf24L01Device.TransferFullDuplex...RX_ADDR_P0");
Debug.WriteLine(" txBuffer:" + BitConverter.ToString(txBuffer3));
device.TransferFullDuplex(txBuffer3, rxBuffer3);
Debug.WriteLine(" rxBuffer:" + BitConverter.ToString(rxBuffer3));
Debug.WriteLine($"Address 0x{RX_ADDR_P0:x2} Address {UTF8Encoding.UTF8.GetString(rxBuffer3, 1, addressWidthValue)}");
Debug.WriteLine("");
// Read the RF Channel
Debug.WriteLine("RF Channel read 1");
byte[] txBuffer4 = new byte[] { RF_CH | R_REGISTER, 0x0 };
byte[] rxBuffer4 = new byte[txBuffer4.Length];
Debug.WriteLine(" nrf24L01Device.TransferFullDuplex...RF_CH");
Debug.WriteLine(" txBuffer:" + BitConverter.ToString(txBuffer4));
device.TransferFullDuplex(txBuffer4, rxBuffer4);
Debug.WriteLine(" rxBuffer:" + BitConverter.ToString(rxBuffer4));
byte rfChannel1 = rxBuffer4[1];
Debug.WriteLine($"RF Channel 1 0x{RF_CH:x2} - Value 0X{rxBuffer4[1]:x2} - Value adjusted {rfChannel1+2400}");
Debug.WriteLine("");
// Write the RF Channel
Debug.WriteLine("RF Channel write");
byte[] txBuffer5 = new byte[] { RF_CH | W_REGISTER, rfChannel1 += 1 };
byte[] rxBuffer5 = new byte[txBuffer5.Length];
Debug.WriteLine(" nrf24L01Device.Write...RF_CH");
Debug.WriteLine(" txBuffer:" + BitConverter.ToString(txBuffer5));
//device.Write(txBuffer5);
device.TransferFullDuplex(txBuffer5, rxBuffer5);
Debug.WriteLine("");
// Read the RF Channel
Debug.WriteLine("RF Channel read 2");
byte[] txBuffer6 = new byte[] { RF_CH | R_REGISTER, 0x0 };
byte[] rxBuffer6 = new byte[txBuffer6.Length];
Debug.WriteLine(" nrf24L01Device.TransferFullDuplex...RF_CH");
Debug.WriteLine(" txBuffer:" + BitConverter.ToString(txBuffer6));
device.TransferFullDuplex(txBuffer6, rxBuffer6);
Debug.WriteLine(" rxBuffer:" + BitConverter.ToString(rxBuffer6));
byte rfChannel2 = rxBuffer6[1];
Debug.WriteLine($"RF Channel 2 0x{RF_CH:x2} - Value 0X{rxBuffer6[1]:x2} - Value adjusted {rfChannel2+2400}");
Debug.WriteLine("");
}
catch (Exception ex)
{
Debug.WriteLine("Configure Port0 " + ex.Message);
}
}
}
catch (Exception ex)
{
Debug.WriteLine(ex.Message);
}
}
public string getDataAsString(int size)
{
return(BitConverter.ToString(getByteArray(size), 0));
}
/// <summary>
/// Convert an IBuffer to a hex string.
/// </summary>
/// <param name="buffer">The buffer.</param>
/// <returns>A hex string.</returns>
public static string ToHexString(IBuffer buffer)
{
CryptographicBuffer.CopyToByteArray(buffer, out byte[] data);
return(BitConverter.ToString(data));
}
private string HexEncode(byte[] bytes)
{
return(BitConverter.ToString(bytes).Replace("-", string.Empty).ToLowerInvariant());
}
// 4
/// <summary>
/// Mã hóa chuỗi theo dạng MD5 ( chuỗi đầu vào: 123456 ->Chuỗi trả về e10adc3949ba59abbe56e057f20f883e)
/// </summary>
/// <param name="data"></param>
/// <returns></returns>
public static string EncryptData(string data)
{
return(BitConverter.ToString(encrypt(data)).Replace("-", "").ToLower());
}
private string Get16ByteMd5(string str)
{
MD5CryptoServiceProvider mD5CryptoServiceProvider = new MD5CryptoServiceProvider();
return(BitConverter.ToString(mD5CryptoServiceProvider.ComputeHash(Encoding.UTF8.GetBytes(str)), 4, 8).Replace("-", "").ToUpper());
}
/// <summary>
/// 将字节数组转换为没有分隔符的十六进制字符串。
/// </summary>
/// <param name="array">要转换的字节数组</param>
/// <returns></returns>
public static string ToStringNoSymbol(this byte[] array)
{
return(BitConverter.ToString(array).Replace("-", ""));
}
private void HandleConnection()
{
byte[] bytes = new byte[300];
try {
try {
connecting = true;
try {
// Connect to a remote device.
ConnectSocketWithTimeout();
DebugLog("Socket connected to " + socket.RemoteEndPoint.ToString());
if (autostart)
{
socket.Send(STARTDT_ACT_MSG);
statistics.SentMsgCounter++;
}
running = true;
socketError = false;
connecting = false;
if (connectionHandler != null)
{
connectionHandler(connectionHandlerParameter, ConnectionEvent.OPENED);
}
} catch (SocketException se) {
DebugLog("SocketException: " + se.ToString());
running = false;
socketError = true;
lastException = se;
if (connectionHandler != null)
{
connectionHandler(connectionHandlerParameter, ConnectionEvent.CONNECT_FAILED);
}
}
if (running)
{
bool loopRunning = running;
while (loopRunning)
{
bool suspendThread = true;
try {
// Receive a message from from the remote device.
int bytesRec = receiveMessage(socket, bytes);
if (bytesRec > 0)
{
DebugLog("RCVD: " + BitConverter.ToString(bytes, 0, bytesRec));
statistics.RcvdMsgCounter++;
bool handleMessage = true;
if (recvRawMessageHandler != null)
{
handleMessage = recvRawMessageHandler(recvRawMessageHandlerParameter, bytes, bytesRec);
}
if (handleMessage)
{
if (checkMessage(socket, bytes, bytesRec) == false)
{
/* close connection on error */
loopRunning = false;
}
}
if (unconfirmedReceivedIMessages >= parameters.W)
{
lastConfirmationTime = SystemUtils.currentTimeMillis();
unconfirmedReceivedIMessages = 0;
SendSMessage();
}
suspendThread = false;
}
else if (bytesRec == -1)
{
loopRunning = false;
}
if (handleTimeouts() == false)
{
loopRunning = false;
}
if (isConnected() == false)
{
loopRunning = false;
}
if (useSendMessageQueue)
{
if (SendNextWaitingASDU() == true)
{
suspendThread = false;
}
}
if (suspendThread)
{
Thread.Sleep(10);
}
}
catch (SocketException) {
loopRunning = false;
}
}
DebugLog("CLOSE CONNECTION!");
// Release the socket.
try {
socket.Shutdown(SocketShutdown.Both);
}
catch (SocketException) {
}
socket.Close();
if (connectionHandler != null)
{
connectionHandler(connectionHandlerParameter, ConnectionEvent.CLOSED);
}
}
} catch (ArgumentNullException ane) {
connecting = false;
DebugLog("ArgumentNullException: " + ane.ToString());
} catch (SocketException se) {
DebugLog("SocketException: " + se.ToString());
} catch (Exception e) {
DebugLog("Unexpected exception: " + e.ToString());
}
} catch (Exception e) {
Console.WriteLine(e.ToString());
}
running = false;
connecting = false;
}
public static Hashes CalculateHashes_here(string strPath, OnHashProgress onHashProgress, bool getCRC32,
bool getMD5,
bool getSHA1)
{
bool getED2k = true;
logger.Trace("Using C# code to has file: {0}", strPath);
FileStream fs;
Hashes rhash = new Hashes();
FileInfo fi = new FileInfo(strPath);
fs = fi.OpenRead();
int lChunkSize = 9728000;
long nBytes = fs.Length;
long nBytesRemaining = fs.Length;
int nBytesToRead = 0;
long nBlocks = nBytes / lChunkSize;
long nRemainder = nBytes % lChunkSize; //mod
if (nRemainder > 0)
{
nBlocks++;
}
byte[] baED2KHash = new byte[16 * nBlocks];
if (nBytes > lChunkSize)
{
nBytesToRead = lChunkSize;
}
else
{
nBytesToRead = (int)nBytesRemaining;
}
onHashProgress?.Invoke(strPath, 0);
MD4 md4 = MD4.Create();
MD5 md5 = MD5.Create();
SHA1 sha1 = SHA1.Create();
Crc32 crc32 = new Crc32();
byte[] ByteArray = new byte[nBytesToRead];
long iOffSet = 0;
long iChunkCount = 0;
while (nBytesRemaining > 0)
{
iChunkCount++;
//logger.Trace("Hashing Chunk: " + iChunkCount.ToString());
int nBytesRead = fs.Read(ByteArray, 0, nBytesToRead);
if (getED2k)
{
byte[] baHash = md4.ComputeHash(ByteArray, 0, nBytesRead);
int j = (int)((iChunkCount - 1) * 16);
for (int i = 0; i < 16; i++)
{
baED2KHash[j + i] = baHash[i];
}
}
if (getMD5)
{
md5.TransformBlock(ByteArray, 0, nBytesRead, ByteArray, 0);
}
if (getSHA1)
{
sha1.TransformBlock(ByteArray, 0, nBytesRead, ByteArray, 0);
}
if (getCRC32)
{
crc32.TransformBlock(ByteArray, 0, nBytesRead, ByteArray, 0);
}
int percentComplete = (int)(iChunkCount / (float)nBlocks * 100);
onHashProgress?.Invoke(strPath, percentComplete);
iOffSet += lChunkSize;
nBytesRemaining = nBytes - iOffSet;
if (nBytesRemaining < lChunkSize)
{
nBytesToRead = (int)nBytesRemaining;
}
}
if (getMD5)
{
md5.TransformFinalBlock(ByteArray, 0, 0);
}
if (getSHA1)
{
sha1.TransformFinalBlock(ByteArray, 0, 0);
}
if (getCRC32)
{
crc32.TransformFinalBlock(ByteArray, 0, 0);
}
fs.Close();
onHashProgress?.Invoke(strPath, 100);
if (getED2k)
{
//byte[] baHashFinal = md4.ComputeHash(baED2KHash);
//rhash.ed2k = BitConverter.ToString(baHashFinal).Replace("-", string.Empty).ToUpper();
rhash.ED2K = nBlocks > 1
? BitConverter.ToString(md4.ComputeHash(baED2KHash)).Replace("-", string.Empty).ToUpper()
: BitConverter.ToString(baED2KHash).Replace("-", string.Empty).ToUpper();
}
if (getCRC32)
{
rhash.CRC32 = BitConverter.ToString(crc32.Hash).Replace("-", string.Empty).ToUpper();
}
if (getMD5)
{
rhash.MD5 = BitConverter.ToString(md5.Hash).Replace("-", string.Empty).ToUpper();
}
if (getSHA1)
{
rhash.SHA1 = BitConverter.ToString(sha1.Hash).Replace("-", string.Empty).ToUpper();
}
return(rhash);
}
public string GetHexString(string data, DataItem dataItem)
{
return(BitConverter.ToString(MapBytes(data, dataItem)));
}
[Category("NotWorking")] // bug #79499
public void LongMultipleGetBytes()
{
// based on http://bugzilla.ximian.com/show_bug.cgi?id=79499
PasswordDeriveBytes pd = new PasswordDeriveBytes("mono", new byte[20]);
string key = BitConverter.ToString(pd.GetBytes(32));
Assert.AreEqual("88-0A-AE-0A-41-61-02-78-FD-E2-70-9F-25-13-14-28-1F-C7-D9-72-9A-AE-CA-3F-BD-31-B4-F0-BD-8E-5B-98", key, "key");
string iv = BitConverter.ToString(pd.GetBytes(16));
Assert.AreEqual("FD-E2-70-9F-25-13-14-28-4D-3F-9B-F8-EE-AA-95-ED", iv, "iv");
pd.Reset();
// bytes from 32-40 are different from calling GetBytes separately
Assert.AreEqual(key + "-F6-55-6C-3E-54-8B-F3-73-4D-3F-9B-F8-EE-AA-95-ED", BitConverter.ToString(pd.GetBytes(48)), "same");
}
/// <summary>
/// sha1加密
/// </summary>
/// <param name="str"></param>
/// <returns></returns>
public static string SHA1(string str)
{
byte[] cleanBytes = Encoding.Default.GetBytes(str);
byte[] hashedBytes = System.Security.Cryptography.SHA1.Create().ComputeHash(cleanBytes);
return(BitConverter.ToString(hashedBytes).Replace("-", "").ToLower());
}
public EsitoVerifica VerificaCertificato(byte[] certificateDER, byte[] certificateCAPEM, FirmaDigitale.FirmaDigitalePortTypeClient client)
{
logger.Debug("INIZIO");
List <string> addiData = new List <string>();
EsitoVerifica ev = new EsitoVerifica();
// FirmaDigitale.DettaglioFirmaDigitaleType ret = null;
CertificateInfo ciInfo = new CertificateInfo();
sbyte? controlloCRLCert = 0;
sbyte? controlloCRLCa = 1;
ciInfo.X509Certificate = certificateDER;
ciInfo.ThumbPrint = BitConverter.ToString(System.Security.Cryptography.SHA1.Create().ComputeHash(certificateDER)).Replace("-", "");
controlloCRLCert = null;
int statusInt = -1;
System.Net.ServicePointManager.SecurityProtocol = System.Net.SecurityProtocolType.Tls | System.Net.SecurityProtocolType.Ssl3;
DateTime dataverifica;
try
{
logger.DebugFormat("len {0}", certificateDER.Length);
FirmaDigitale.CertificatoType certOut = client.VerificaCertificato(certificateDER, certificateCAPEM, controlloCRLCert, controlloCRLCa, out dataverifica);
logger.Debug("verificaOK");
ciInfo = convertFromCertificatoType(certOut);
statusInt = 0;
}
catch (FaultException <FirmaDigitale.WarningCertificatoType> w)
{
string status = w.Detail.status;
string errMsg = w.Detail.errorMsg;
logger.Debug(status);
logger.Debug(errMsg);
addiData.Add(status);
addiData.Add(errMsg);
ciInfo = convertFromWarningCertificatoType(w.Detail);
Int32.TryParse(w.Detail.status, out statusInt);
ciInfo.RevocationStatus = statusInt;
ev.errorCode = w.Detail.status.ToString();
if (errMsg.ToLower().Contains("revoc"))
{
ev.status = EsitoVerificaStatus.Revoked;
}
else
{
ev.status = EsitoVerificaStatus.NotTimeValid;
}
}
catch (Exception e)
{
logger.ErrorFormat("errore {0} {1}", e.Message, e.StackTrace);
ev.message = e.Message;
}
// ciInfo.ThumbPrint = BitConverter.ToString(System.Security.Cryptography.SHA1.Create().ComputeHash(certificateDER)).Replace("-", "");
ev.additionalData = addiData.ToArray();
//quarda che devo fare per restituire il certificateinfo
List <SignerInfo> retSI = new List <SignerInfo>();
List <PKCS7Document> p7doc = new List <PKCS7Document>();
retSI.Add(new SignerInfo {
CertificateInfo = ciInfo
});
p7doc.Add(new PKCS7Document {
SignersInfo = retSI.ToArray()
});
ev.VerifySignatureResult = new VerifySignatureResult {
StatusCode = statusInt, PKCS7Documents = p7doc.ToArray()
};
return(ev);
}
