/// <summary>
/// 采集NG后，可以再次测试采集，这里做自动Undo
/// </summary>
public Messages UndoNG(ActionEventArgs actionEventArgs)
{
Messages msg = new Messages();
// 是否配置需要Undo
if (System.Configuration.ConfigurationSettings.AppSettings["UndoNG"] != "1")
{
return(msg);
}
bool bNeedUndo = false;
BenQGuru.eMES.TS.TSFacade tsFacade = null;
BenQGuru.eMES.Domain.TS.TS ts = null;
object objTmp;
if (actionEventArgs.ProductInfo != null && actionEventArgs.ProductInfo.LastSimulation != null)
{
// 上次采NG的才可以Undo
if (actionEventArgs.ProductInfo.LastSimulation.ProductStatus == ProductStatus.NG)
{
// 产品是否还在本OP
BenQGuru.eMES.BaseSetting.BaseModelFacade modelFacade = new BaseModelFacade(this.DataProvider);
objTmp = modelFacade.GetOperation2Resource(actionEventArgs.ProductInfo.LastSimulation.OPCode, actionEventArgs.ResourceCode);
if (objTmp == null)
{
return(msg);
}
// 是否已在做维修
tsFacade = new BenQGuru.eMES.TS.TSFacade(this.DataProvider);
ts = (BenQGuru.eMES.Domain.TS.TS)tsFacade.GetCardLastTSRecord(actionEventArgs.ProductInfo.LastSimulation.RunningCard);
if (ts == null || ts.TSStatus != TSStatus.TSStatus_New)
{
return(msg);
}
bNeedUndo = true;
}
}
if (bNeedUndo == false)
{
return(msg);
}
// 开始Undo
// 查询OnWIP
Simulation simulation = actionEventArgs.ProductInfo.LastSimulation;
string strSql = "SELECT * FROM tblOnWIP WHERE RCard='" + simulation.RunningCard + "' AND MOCode='" + simulation.MOCode + "' ORDER BY RCardSeq ";
object[] objsWip = this.DataProvider.CustomQuery(typeof(OnWIP), new SQLCondition(strSql));
if (objsWip == null || objsWip.Length < 2)
{
return(msg);
}
OnWIP wip = (OnWIP)objsWip[objsWip.Length - 1];
BenQGuru.eMES.Report.ReportFacade reportFacade = new BenQGuru.eMES.Report.ReportFacade(this.DataProvider);
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
#region 更新TS相关
/* 不用再清除不良信息
* // 查询TBLTSERRORCODE
* strSql = "SELECT * FROM TBLTSERRORCODE WHERE TSID='" + ts.TSId + "' ";
* object[] objsErrorCode = this.DataProvider.CustomQuery(typeof(BenQGuru.eMES.Domain.TS.TSErrorCode), new SQLCondition(strSql));
* string strErrorCodeList = string.Empty;
* if (objsErrorCode != null)
* {
* // 更新TBLRPTRESECG
* for (int i = 0; i < objsErrorCode.Length; i++)
* {
* BenQGuru.eMES.Domain.TS.TSErrorCode errorCode = (BenQGuru.eMES.Domain.TS.TSErrorCode)objsErrorCode[i];
* objTmp = reportFacade.GetReportErrorCode2Resource(wip.ModelCode, wip.ItemCode, wip.MOCode, wip.ShiftDay, wip.ShiftCode, wip.TimePeriodCode, wip.OPCode, wip.ResourceCode, wip.SegmentCode, wip.StepSequenceCode, errorCode.ErrorCodeGroup, errorCode.ErrorCode);
* if (objTmp != null)
* {
* BenQGuru.eMES.Domain.Report.ReportErrorCode2Resource rptError = (BenQGuru.eMES.Domain.Report.ReportErrorCode2Resource)objTmp;
* if (rptError.NGTimes == 1)
* {
* reportFacade.DeleteReportErrorCode2Resource(rptError);
* }
* else
* {
* rptError.NGTimes = rptError.NGTimes - 1;
* reportFacade.UpdateReportErrorCode2Resource(rptError);
* }
* }
* strErrorCodeList = strErrorCodeList + errorCode.ErrorCodeGroup + ":" + errorCode.ErrorCode + ";";
* }
* // 删除TBLTSERRORCODE
* if (objsErrorCode.Length == 1)
* tsFacade.DeleteTSErrorCode((BenQGuru.eMES.Domain.TS.TSErrorCode)objsErrorCode[0]);
* else
* {
* strSql = "DELETE FROM TBLTSERRORCODE WHERE TSID='" + ts.TSId + "' ";
* this.DataProvider.CustomExecute(new SQLCondition(strSql));
* }
* }
* // 删除TS
* tsFacade.DeleteTS(ts);
*/
// 更新TS
ts.TSStatus = TSStatus.TSStatus_RepeatNG; // 不良品重复测试
ts.ReflowMOCode = simulation.MOCode;
ts.ReflowOPCode = simulation.OPCode;
ts.ReflowRouteCode = simulation.RouteCode;
tsFacade.UpdateTS(ts);
#endregion
// 更新报表
//UndoNGReport(simulation, wip, true, strErrorCodeList, (OnWIP)objsWip[objsWip.Length - 2]);
if (System.Configuration.ConfigurationSettings.AppSettings["UndoNGUndoReport"] == "1")
{
// 查询TBLTSERRORCODE
strSql = "SELECT * FROM TBLTSERRORCODE WHERE TSID='" + ts.TSId + "' ";
object[] objsErrorCode = this.DataProvider.CustomQuery(typeof(BenQGuru.eMES.Domain.TS.TSErrorCode), new SQLCondition(strSql));
string strErrorCodeList = string.Empty;
if (objsErrorCode != null)
{
// 更新TBLRPTRESECG
for (int i = 0; i < objsErrorCode.Length; i++)
{
BenQGuru.eMES.Domain.TS.TSErrorCode errorCode = (BenQGuru.eMES.Domain.TS.TSErrorCode)objsErrorCode[i];
strErrorCodeList = strErrorCodeList + errorCode.ErrorCodeGroup + ":" + errorCode.ErrorCode + ";";
}
}
//UndoNGReport(simulation, wip, true, strErrorCodeList, (OnWIP)objsWip[objsWip.Length - 2]);
}
// 更新Simulation
UndoNGSimulation(simulation, true, (OnWIP)objsWip[objsWip.Length - 2]);
//UpdateUndoWIP((OnWIP)objsWip[objsWip.Length - 1]); // 保留测试信息
// 如果上次采集是GOOD->NG，这次采GOOD，那还需要Undo再上次的GOOD
wip = (OnWIP)objsWip[objsWip.Length - 2];
if (wip.Action == ActionType.DataCollectAction_GOOD &&
wip.OPCode == simulation.OPCode)
{
if (System.Configuration.ConfigurationSettings.AppSettings["UndoNGUndoReport"] == "1")
{
// 更新报表
//UndoNGReport(simulation, wip, false, string.Empty, (OnWIP)objsWip[objsWip.Length - 3]);
}
// 更新Simulation
UndoNGSimulation(simulation, false, (OnWIP)objsWip[objsWip.Length - 3]);
//UpdateUndoWIP((OnWIP)objsWip[objsWip.Length - 2]); // 保留测试信息
}
ActionOnLineHelper onlineHelper = new ActionOnLineHelper(this.DataProvider);
Messages msgTmp = onlineHelper.GetIDInfo(simulation.RunningCard);
actionEventArgs.ProductInfo = (ProductInfo)msgTmp.GetData().Values[0];
return(msg);
}
/// <summary>
/// Undo时更新报表数据
/// </summary>
private void UndoNGReport(Simulation simulation, OnWIP wip, bool isNG, string errorCodeList, OnWIP prevWip)
{
BenQGuru.eMES.Report.ReportFacade reportFacade = new BenQGuru.eMES.Report.ReportFacade(this.DataProvider);
// 更新TBLRPTHISOPQTY
string qtyFlag = "N";
object objTmp = reportFacade.GetReportHistoryOPQty(wip.ModelCode, wip.ShiftDay, wip.MOCode, wip.TimePeriodCode, wip.StepSequenceCode, wip.SegmentCode, wip.ItemCode, wip.ShiftCode, wip.OPCode, wip.ResourceCode, "N");
if (objTmp == null)
{
objTmp = reportFacade.GetReportHistoryOPQty(wip.ModelCode, wip.ShiftDay, wip.MOCode, wip.TimePeriodCode, wip.StepSequenceCode, wip.SegmentCode, wip.ItemCode, wip.ShiftCode, wip.OPCode, wip.ResourceCode, "Y");
qtyFlag = "Y";
}
if (objTmp != null)
{
BenQGuru.eMES.Domain.Report.ReportHistoryOPQty hisQty = (BenQGuru.eMES.Domain.Report.ReportHistoryOPQty)objTmp;
// 如果上次是NG
if (isNG == true)
{
// NG次数减1
hisQty.NGTimes = hisQty.NGTimes - 1 * simulation.IDMergeRule;
// 更新不良代码列表
if (hisQty.ErrorGroup2Err.Length >= errorCodeList.Length && errorCodeList != string.Empty)
{
hisQty.ErrorGroup2Err = hisQty.ErrorGroup2Err.Substring(0, hisQty.ErrorGroup2Err.Length - errorCodeList.Length);
}
}
else // 如果上次是GOOD
{
// 如果是Undo GOOD，那OutputQty要不要减 1 ？
// 由于Undo GOOD之前一定做过Undo NG，所以OutputQty不用减 1
// 也就是这个OP上最后采集的结果是NG，本来就没有记OutputQty
//hisQty.OuputQty = hisQty.OuputQty - 1;
}
if (prevWip.Action == ActionType.DataCollectAction_GoMO)
{
// 减去OP采集数
hisQty.EAttribute2 = hisQty.EAttribute2 - 1 * simulation.IDMergeRule;
}
this.DataProvider.Update(hisQty);
}
// 更新tblrptreallineecqty
if (isNG == true)
{
string[] errorCodes = errorCodeList.Split(';');
for (int i = 0; i < errorCodes.Length; i++)
{
if (errorCodes[i] == string.Empty)
{
continue;
}
string[] errorCode = errorCodes[i].Split(':');
BenQGuru.eMES.Domain.Report.ReportRealtimeLineErrorCodeQty rptErrorCode =
(BenQGuru.eMES.Domain.Report.ReportRealtimeLineErrorCodeQty)reportFacade.GetReportRealtimeLineErrorCodeQty(wip.ModelCode, wip.ShiftDay, wip.MOCode, wip.TimePeriodCode, wip.StepSequenceCode, wip.SegmentCode, wip.ItemCode, wip.ShiftCode, errorCode[1], errorCode[0]);
if (rptErrorCode != null)
{
if (rptErrorCode.ErrorCodeTimes <= 1)
{
reportFacade.DeleteReportRealtimeLineErrorCodeQty(rptErrorCode);
}
else
{
string strSql = "UPDATE tblrptreallineecqty SET ECTimes=ECTimes-1 WHERE ModelCode='" + wip.ModelCode + "' AND ShiftDay=" + wip.ShiftDay.ToString() +
" AND MOCode='" + wip.MOCode + "' AND TPCode='" + wip.TimePeriodCode + "' AND SSCode='" + wip.StepSequenceCode + "' AND SegCode='" + wip.SegmentCode + "' AND ItemCode='" + wip.ItemCode + "' AND ShiftCode='" + wip.ShiftCode + "' " +
" AND ECODE='" + errorCode[1] + "' AND ECGCODE='" + errorCode[0] + "' ";
this.DataProvider.CustomExecute(new SQLCondition(strSql));
}
}
}
}
// 更新TBLRPTREALLINEQTY
string updateField = string.Empty;
// 如果上次是NG
if (isNG == true)
{
// NG次数减1
updateField = "NGTimes=NGTimes-" + (1 * simulation.IDMergeRule).ToString();
}
else
{
// 如果完工，则更新完工数量
if (FormatHelper.StringToBoolean(simulation.IsComplete) == true)
{
updateField = "OutputQty=OutputQty-" + (1 * simulation.IDMergeRule).ToString();
if (simulation.NGTimes == 0)
{
BenQGuru.eMES.Rework.ReworkFacade reworkFacade = new BenQGuru.eMES.Rework.ReworkFacade(this.DataProvider);
if (reworkFacade.GetRejectCountByMO(simulation.RunningCard, simulation.MOCode) == 0)
{
updateField += "AllGoodQty=AllGoodQty-" + (1 * simulation.IDMergeRule).ToString();
}
}
// 更新工单产出
string strSql = "UPDATE tblMO SET MOActQty=MOActQty-" + (1 * simulation.IDMergeRule).ToString() + " WHERE MOCode='" + simulation.MOCode + "' ";
this.DataProvider.CustomExecute(new SQLCondition(strSql));
}
}
if (updateField != string.Empty)
{
string strSql = "UPDATE TBLRPTREALLINEQTY SET " + updateField + " WHERE ModelCode='" + wip.ModelCode + "' AND ShiftDay=" + wip.ShiftDay.ToString() +
" AND MOCode='" + wip.MOCode + "' AND TPCode='" + wip.TimePeriodCode + "' AND SSCode='" + wip.StepSequenceCode + "' AND SegCode='" + wip.SegmentCode + "' AND ItemCode='" + wip.ItemCode + "' AND ShiftCode='" + wip.ShiftCode + "' " +
" AND QtyFlag='" + qtyFlag + "' ";
this.DataProvider.CustomExecute(new SQLCondition(strSql));
}
}
