private void InitDropDownList() { if (_facade == null) { _facade = new WarehouseFacade(base.DataProvider); } //来源工厂 DropDownListBuilder builder = new DropDownListBuilder(this.drpFactoryFromQuery); builder.HandleGetObjectList = new GetObjectListDelegate(this._facade.GetAllFactory); builder.Build("FactoryCode", "FactoryCode"); this.drpFactoryFromQuery.Items.Insert(0, new ListItem("", "")); //目标工厂 builder = new DropDownListBuilder(this.drpFactoryToQuery); builder.HandleGetObjectList = new GetObjectListDelegate(this._facade.GetAllFactory); builder.Build("FactoryCode", "FactoryCode"); this.drpFactoryToQuery.Items.Insert(0, new ListItem("", "")); //来源工段 BenQGuru.eMES.BaseSetting.BaseModelFacade bmFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(base.DataProvider); // builder = new DropDownListBuilder(this.drpSegmentFromQuery); // builder.HandleGetObjectList = new GetObjectListDelegate(bmFacade.GetAllSegment); // builder.Build("SegmentCode","SegmentCode"); // this.drpSegmentFromQuery.Items.Insert(0, new ListItem("", "")); // //目标工段 // builder = new DropDownListBuilder(this.drpSegmentToQuery); // builder.HandleGetObjectList = new GetObjectListDelegate(bmFacade.GetAllSegment); // builder.Build("SegmentCode","SegmentCode"); // this.drpSegmentToQuery.Items.Insert(0, new ListItem("", "")); bmFacade = null; builder = null; }
public void BuildRouteTree(Route route) { BenQGuru.eMES.BaseSetting.BaseModelFacade baseFacade = SMTFacadeFactory.CreateBaseModelFacadeFacade(); Node root = this._tree.Nodes.Add(route.RouteCode); object[] ops = baseFacade.GetSelectedOperationByRouteCode(route.RouteCode, string.Empty, 1, int.MaxValue); if (ops != null) { foreach (Operation op in ops) { Node opNode = root.Nodes.Add(op.OPCode); object[] reses = baseFacade.GetSelectedResourceByOperationCode(op.OPCode, string.Empty, 1, int.MaxValue); if (reses != null) { foreach (Resource res in reses) { opNode.Nodes.Add(res.ResourceCode); } opNode.Expanded = true; } } root.Expanded = true; } }
private void FFirstOffline_Load(object sender, System.EventArgs e) { _firstMsg = UserControl.MutiLanguages.ParserMessage("$Error_FirstOn_Time"); //{0}{1}产线首件上线时间是:{2}; _offMsg = UserControl.MutiLanguages.ParserMessage("$Error_FirstOff_Time"); //{0}{1}产线首件下线线时间是:{2},总共时间为{3}小时{4}分种 this.ucRCard.TextFocus(false, true); Messages msg = new Messages(); _facade = new FirstOnlineFacade(this.DataProvider); //取产线 BenQGuru.eMES.BaseSetting.BaseModelFacade _baseFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider); Resource res = (Resource)_baseFacade.GetResource(ApplicationService.Current().ResourceCode); if (res != null && res.StepSequenceCode != null) { this.ucSSName.Value = res.StepSequenceCode; } else { msg.Add(new UserControl.Message(MessageType.Error, this.ucSSName.Caption + "$Error_Input_Empty")); ApplicationRun.GetInfoForm().Add(msg); return; } this.ucRCard.InnerTextBox.Multiline = false; }
protected override bool ValidateInput() { PageCheckManager manager = new PageCheckManager(); manager.Add(new LengthCheck(this.lblNGCodeEdit, this.txtErrorCode, 65535, true)); manager.Add(new LengthCheck(this.lblReworkOPCodeEdit, this.txtReworkOPCode, 40, true)); if (!manager.Check()) { WebInfoPublish.Publish(this, manager.CheckMessage, this.languageComponent1); return(false); } if (this.txtReworkRoute.Text.Trim().Length != 0) { BenQGuru.eMES.BaseSetting.BaseModelFacade baseModelFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider); object route2op = baseModelFacade.GetRoute2Operation(this.txtReworkRoute.Text.ToUpper(), this.txtReworkOPCode.Text.ToUpper()); if (route2op == null) { WebInfoPublish.Publish(this, "$Error_RouteHasNoOperations", this.languageComponent1); return(false); } } return(true); }
private void InitDropDownList() { if (_facade == null) { _facade = new WarehouseFacade(base.DataProvider); } DropDownListBuilder builder = new DropDownListBuilder(this.drpFactoryCodeQuery); builder.HandleGetObjectList = new GetObjectListDelegate(this._facade.GetAllFactory); builder.Build("FactoryCode", "FactoryCode"); this.drpFactoryCodeQuery.Items.Insert(0, new ListItem("", "")); BenQGuru.eMES.BaseSetting.BaseModelFacade bmFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(base.DataProvider); // builder = new DropDownListBuilder(this.drpSegmentCodeQuery); // builder.HandleGetObjectList = new GetObjectListDelegate(bmFacade.GetAllSegment); // builder.Build("SegmentCode","SegmentCode"); // this.drpSegmentCodeQuery.Items.Insert(0, new ListItem("", "")); /* * builder = new DropDownListBuilder(this.drpWarehouseCodeQuery); * builder.HandleGetObjectList = new GetObjectListDelegate(this._facade.GetAllDistinctWarehouse); * builder.Build("WarehouseCode","WarehouseCode"); * this.drpWarehouseCodeQuery.Items.Insert(0, new ListItem(lword.ControlText, "")); */ bmFacade = null; builder = null; }
protected override void UpdateDomainObject(object domainObject) { if (_facade == null) { _facade = new TSModelFacadeFactory(base.DataProvider).CreateTSModelFacade(); } if (((ErrorCodeItem2Route)domainObject).RouteCode.ToUpper() != "TS" && ((ErrorCodeItem2Route)domainObject).RouteCode.Trim().Length > 0) { //检查途程是不是和产品挂起来了 BenQGuru.eMES.MOModel.ItemFacade itemFacade = new BenQGuru.eMES.MOModel.ItemFacade(this.DataProvider); object ir = itemFacade.GetItem2Route(((ErrorCodeItem2Route)domainObject).ItemCode, ((ErrorCodeItem2Route)domainObject).RouteCode, ((ErrorCodeItem2Route)domainObject).OrganizationID.ToString()); if (ir == null) { throw new Exception("$Error_ItemRoute_NotExist"); } } if (((ErrorCodeItem2Route)domainObject).RouteCode.Trim().Length > 0) { BenQGuru.eMES.BaseSetting.BaseModelFacade baseModelFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider); object route2op = baseModelFacade.GetRoute2Operation(((ErrorCodeItem2Route)domainObject).RouteCode.ToUpper(), ((ErrorCodeItem2Route)domainObject).OPCode.ToUpper()); if (route2op == null) { throw new Exception("$Error_RouteHasNoOperations"); } } this._facade.UpdateErrorCodeItem2Route((ErrorCodeItem2Route)domainObject); }
private void FFirstOnline_Load(object sender, System.EventArgs e) { _firstMsg = UserControl.MutiLanguages.ParserMessage("$Error_FirstOn_Time"); //{0}{1}产线首件上线时间是:{2}; this.ucRCard.TextFocus(false, true); Messages msg = new Messages(); _facade = new FirstOnlineFacade(this.DataProvider); //取产线 BenQGuru.eMES.BaseSetting.BaseModelFacade _baseFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider); Resource res = (Resource)_baseFacade.GetResource(ApplicationService.Current().ResourceCode); if (res != null && res.StepSequenceCode != null) { this.ucSSName.Value = res.StepSequenceCode; } else { msg.Add(new UserControl.Message(MessageType.Error, this.ucSSName.Caption + "$Error_Input_Empty")); ApplicationRun.GetInfoForm().Add(msg); return; } int i = this._facade.BindShiftTime(this.cbxShiftTime.ComboBoxData.Items, res); if (i >= 0) { this.cbxShiftTime.ComboBoxData.SelectedIndex = i; this.dtpBegin.Text = this.cbxShiftTime.ComboBoxData.SelectedItem.ToString(); } this.ucRCard.InnerTextBox.Multiline = false; DoSSCodeChange(); }
// Added by Icyer 2006/12/15 // 检查工单 private Messages CheckMO(object act) { Messages msgs = new Messages(); BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider domainProvider = null; if ((act as IDCTClient).DBConnection != null) { domainProvider = (act as IDCTClient).DBConnection as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider; } else { domainProvider = Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider() as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider; (act as IDCTClient).DBConnection = domainProvider; } MOFacade moFacade = new MOFacade(domainProvider); MO mo = (MO)moFacade.GetMO(act.ToString().ToUpper()); if (mo == null) { msgs.Add(new UserControl.Message(MessageType.Error, "$CS_MO_NOT_EXIST")); ProcessBeforeReturn(this.Status, msgs); return(msgs); } if (mo.MOStatus != BenQGuru.eMES.Web.Helper.MOManufactureStatus.MOSTATUS_RELEASE && mo.MOStatus != BenQGuru.eMES.Web.Helper.MOManufactureStatus.MOSTATUS_OPEN) { msgs.Add(new UserControl.Message(MessageType.Error, "$Error_CS_MO_Should_be_Release_or_Open")); ProcessBeforeReturn(this.Status, msgs); return(msgs); } MO2Route route = (MO2Route)moFacade.GetMONormalRouteByMOCode(mo.MOCode); if (route == null) { msgs.Add(new UserControl.Message(MessageType.Error, "$CS_MOnotNormalRoute")); ProcessBeforeReturn(this.Status, msgs); return(msgs); } DataCollectFacade dataCollectFacade = new DataCollectFacade(domainProvider); ItemRoute2OP op = dataCollectFacade.GetMORouteFirstOP(mo.MOCode, route.RouteCode); BenQGuru.eMES.BaseSetting.BaseModelFacade dataModel = new BenQGuru.eMES.BaseSetting.BaseModelFacade(domainProvider); if (dataModel.GetOperation2Resource(op.OPCode, (act as IDCTClient).ResourceCode) == null) { msgs.Add(new UserControl.Message(MessageType.Error, "$CS_Route_Failed_FirstOP $Domain_MO =" + mo.MOCode)); ProcessBeforeReturn(this.Status, msgs); return(msgs); } ProcessBeforeReturn(this.Status, msgs); return(msgs); }
protected int GetRowCount() { if (facade == null) { facade = (new FacadeFactory(base.DataProvider)).CreateBaseModelFacade(); } return(this.facade.GetItem2RouteCount( FormatHelper.PKCapitalFormat(FormatHelper.CleanString(ItemCode)))); }
protected object[] LoadDataSource(int inclusive, int exclusive) { if (facade == null) { facade = new FacadeFactory(base.DataProvider).CreateBaseModelFacade(); } return(this.facade.QueryItem2Route( FormatHelper.PKCapitalFormat(FormatHelper.CleanString(ItemCode)), inclusive, exclusive)); }
private string GetOPControl(Hashtable htRoute, Hashtable htOP, RPTCenterYield real) { string routeCode = ""; if (htRoute.Contains(real.MOCode) == true) { routeCode = ((MO2Route)htRoute[real.MOCode]).RouteCode; } object objOp = null; if (htOP.Contains(real.ItemCode + ":" + routeCode + ":" + real.OperationCode) == true) { objOp = htOP[real.ItemCode + ":" + routeCode + ":" + real.OperationCode]; } else { QueryFacade1 queryFacade1 = new QueryFacade1(this.DataProvider); try { objOp = queryFacade1.GetItemRoute2Operation(real.ItemCode, routeCode, real.OperationCode); if (objOp != null) { htOP.Add(real.ItemCode + ":" + routeCode + ":" + real.OperationCode, objOp); } } catch {} } string opControl = String.Empty; if (objOp != null) { if (objOp is ItemRoute2OP) { opControl = ((ItemRoute2OP)objOp).OPControl; } else if (objOp is BenQGuru.eMES.Domain.BaseSetting.Operation) { opControl = ((BenQGuru.eMES.Domain.BaseSetting.Operation)objOp).OPControl; } } else { BenQGuru.eMES.BaseSetting.BaseModelFacade modelFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider); object objTmp = modelFacade.GetOperation(real.OperationCode); if (objTmp != null) { opControl = ((BenQGuru.eMES.Domain.BaseSetting.Operation)objTmp).OPControl; htOP.Add(real.ItemCode + ":" + routeCode + ":" + real.OperationCode, objTmp); } } return(opControl); }
public object[] GetResources(string SSCode) { BaseSetting.BaseModelFacade baseModeFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider); object[] objs = baseModeFacade.GetResourceByStepSequenceCode(SSCode); if (objs == null) { objs = new object[] { } } ; return(objs); }
/// <summary> /// RCard Burn Out /// </summary> /// <returns></returns> private Messages RunBurnOut(string rcard, string shelfpk) { if (Resource == null) { BenQGuru.eMES.BaseSetting.BaseModelFacade dataModel = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider); Resource = (Domain.BaseSetting.Resource)dataModel.GetResource(ApplicationService.Current().ResourceCode); } Messages messages = new Messages(); try { messages = GetProduct(rcard); if (messages.IsSuccess()) { product = (ProductInfo)messages.GetData().Values[0]; actionCheckStatus = new ActionCheckStatus(); actionCheckStatus.ProductInfo = product; if (actionCheckStatus.ProductInfo != null) { actionCheckStatus.ProductInfo.Resource = Resource; } IAction dataCollectModule = new ActionFactory(this.DataProvider).CreateAction(ActionType.DataCollectAction_BurnOutGood); ActionEventArgs actionEventArgs = new ActionEventArgs( ActionType.DataCollectAction_BurnOutGood, rcard, ApplicationService.Current().UserCode, ApplicationService.Current().ResourceCode, shelfpk, product); messages.AddMessages(((IActionWithStatus)dataCollectModule).Execute( actionEventArgs, actionCheckStatus)); } if (messages.IsSuccess()) { messages.Add(new UserControl.Message(MessageType.Success, string.Format("$CS_BurnOutSUCCESS,$CS_Param_ID:{0}", rcard))); } return(messages); } catch (Exception e) { messages.Add(new UserControl.Message(e)); return(messages); } }
private void InitDropDownList() { if (_facade == null) { _facade = new WarehouseFacade(base.DataProvider); } BenQGuru.eMES.Common.MutiLanguage.LanguageWord lword = languageComponent1.GetLanguage("listItemAll"); DropDownListBuilder builder = new DropDownListBuilder(this.drpFactoryCodeQuery); builder.HandleGetObjectList = new GetObjectListDelegate(this._facade.GetAllFactory); builder.Build("FactoryCode", "FactoryCode"); this.drpFactoryCodeQuery.Items.Insert(0, new ListItem(lword.ControlText, "")); BenQGuru.eMES.BaseSetting.BaseModelFacade bmFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(base.DataProvider); // builder = new DropDownListBuilder(this.drpSegmentCodeQuery); // builder.HandleGetObjectList = new GetObjectListDelegate(bmFacade.GetAllSegment); // builder.Build("SegmentCode","SegmentCode"); // this.drpSegmentCodeQuery.Items.Insert(0, new ListItem(lword.ControlText, "")); builder = new DropDownListBuilder(this.drpFactoryCodeEdit); builder.HandleGetObjectList = new GetObjectListDelegate(this._facade.GetAllFactory); builder.Build("FactoryCode", "FactoryCode"); this.drpFactoryCodeEdit.Items.Insert(0, new ListItem(lword.ControlText, "")); // builder = new DropDownListBuilder(this.drpSegmentCodeEdit); // builder.HandleGetObjectList = new GetObjectListDelegate(bmFacade.GetAllSegment); // builder.Build("SegmentCode","SegmentCode"); // this.drpSegmentCodeEdit.Items.Insert(0, new ListItem(lword.ControlText, "")); builder = new DropDownListBuilder(this.drpWarehouseTypeEdit); builder.HandleGetObjectList = new GetObjectListDelegate(this._facade.GetWarehouseTypes); builder.Build("ParameterAlias", "ParameterCode"); this.drpWarehouseStatusEdit.Items.Clear(); this.drpWarehouseStatusEdit.Items.Add(new ListItem(this.languageComponent1.GetString(Warehouse.WarehouseStatus_Normal), Warehouse.WarehouseStatus_Normal)); this.drpWarehouseStatusEdit.Items.Add(new ListItem(this.languageComponent1.GetString(Warehouse.WarehouseStatus_Cycle), Warehouse.WarehouseStatus_Cycle)); InitWarehouseCodeQueryList(); bmFacade = null; lword = null; builder = null; this.chbIsControl.Checked = true; }
protected void drpSegmentCode_SelectedIndexChanged(object sender, EventArgs e) { BenQGuru.eMES.BaseSetting.BaseModelFacade modelFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider); object[] objs = modelFacade.GetStepSequenceBySegmentCode(this.drpSegmentCode.SelectedValue); this.drpSSCode.Items.Clear(); if (objs != null) { for (int i = 0; i < objs.Length; i++) { this.drpSSCode.Items.Add(new ListItem(((StepSequence)objs[i]).StepSequenceCode, ((StepSequence)objs[i]).StepSequenceCode)); } } if (this.drpSSCode.Items.Count > 0) { this.drpSSCode.SelectedIndex = 0; } }
private System.Data.DataTable LoadData() { System.Data.DataTable dt = new System.Data.DataTable("SS"); dt.Columns.Add("生产线代码"); dt.Columns.Add("生产线描述"); dt.Columns.Add("所属工段"); //load 产线数据 BenQGuru.eMES.BaseSetting.BaseModelFacade _baseFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider); object[] objs = _baseFacade.GetAllStepSequence(); foreach (object obj in objs) { BenQGuru.eMES.Domain.BaseSetting.StepSequence ss = obj as BenQGuru.eMES.Domain.BaseSetting.StepSequence; if (ss != null) { dt.Rows.Add(new object[] { ss.StepSequenceCode, ss.StepSequenceDescription, ss.SegmentCode }); } } return(dt); }
protected void Page_Load(object sender, System.EventArgs e) { if (!this.IsPostBack) { // 初始化页面语言 this.InitPageLanguage(this.languageComponent1, false); BenQGuru.eMES.BaseSetting.BaseModelFacade modelFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider); object[] objs = modelFacade.GetAllSegment(); this.drpSegmentCode.Items.Clear(); for (int i = 0; i < objs.Length; i++) { this.drpSegmentCode.Items.Add(new ListItem(((Segment)objs[i]).SegmentCode, ((Segment)objs[i]).SegmentCode)); } if (this.drpSegmentCode.Items.Count > 0) { this.drpSegmentCode.SelectedIndex = 0; drpSegmentCode_SelectedIndexChanged(null, null); } } this.cmdSave.Disabled = false; }
private void InitDropDownList() { if (_facade == null) { _facade = new WarehouseFacade(base.DataProvider); } BenQGuru.eMES.Common.MutiLanguage.LanguageWord lword = languageComponent1.GetLanguage("listItemAll"); DropDownListBuilder builder = new DropDownListBuilder(this.drpFactoryCodeQuery); builder.HandleGetObjectList = new GetObjectListDelegate(this._facade.GetAllFactory); builder.Build("FactoryCode", "FactoryCode"); this.drpFactoryCodeQuery.Items.Insert(0, new ListItem("", "")); BenQGuru.eMES.BaseSetting.BaseModelFacade bmFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(base.DataProvider); // builder = new DropDownListBuilder(this.drpSegmentCodeQuery); // builder.HandleGetObjectList = new GetObjectListDelegate(bmFacade.GetAllSegment); // builder.Build("SegmentCode","SegmentCode"); // this.drpSegmentCodeQuery.Items.Insert(0, new ListItem("", "")); bmFacade = null; lword = null; builder = null; }
private void ucLabelRcard_TxtboxKeyPress(object sender, KeyPressEventArgs e) { if (e.KeyChar == '\r') { if (this.ucLabelSoftVersion.Value.Trim().Length == 0) { this.ucLabelSoftVersion.TextFocus(false, true); ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Normal, "$CS_PleaseChooseSoftVersion")); return; } if (this.ucLabelRcard.Value == string.Empty) { this.ucLabelRcard.TextFocus(false, true); return; } string newVersion = FormatHelper.PKCapitalFormat(FormatHelper.CleanString(this.ucLabelSoftVersion.Value)); string rcard = FormatHelper.PKCapitalFormat(FormatHelper.CleanString(this.ucLabelRcard.Value)); Messages msg = new Messages(); ((SQLDomainDataProvider)DataProvider).PersistBroker.AutoCloseConnection = false; ((SQLDomainDataProvider)DataProvider).PersistBroker.OpenConnection(); try { DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider); string sourceRCard = dataCollectFacade.GetSourceCard(rcard.Trim().ToUpper(), string.Empty); // 获取要升级的产品序列号信息 OnWipSoftVer4Upgrade oldVersion = dataCollectFacade.GetOldSoftVersion(sourceRCard); if (oldVersion == null) { ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_Rcard_Or_NOSoftInfo")); this.ucLabelRcard.TextFocus(false, true); return; } // 判断软件版本是否相同,相同就不需要升级了 if (string.Compare(oldVersion.SoftwareVersion, newVersion, true) == 0) { ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Normal, "$CS_AlreadyUpgraded")); this.ucLabelRcard.TextFocus(false, true); return; } BenQGuru.eMES.BaseSetting.BaseModelFacade dataModel = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider); Resource resource = (Domain.BaseSetting.Resource)dataModel.GetResource(ApplicationService.Current().ResourceCode); string userCode = ApplicationService.Current().UserCode; // 升级 msg.AddMessages(dataCollectFacade.UpgradeNewSoftVer(oldVersion, resource, userCode, newVersion)); if (!msg.IsSuccess()) { ApplicationRun.GetInfoForm().Add(msg); this.ucLabelRcard.TextFocus(false, true); return; } dtSoftWareVersion.Rows.Add(new object[] { oldVersion.RunningCard, oldVersion.ItemDescription, oldVersion.SoftwareVersion, newVersion }); dtSoftWareVersion.AcceptChanges(); this.ucLabelEditCount.Value = this.dtSoftWareVersion.Rows.Count.ToString(); this.ucLabelRcard.TextFocus(false, true); } catch (Exception ex) { ApplicationRun.GetInfoForm().Add(ex.Message); this.ucLabelRcard.TextFocus(false, true); } finally { ((SQLDomainDataProvider)DataProvider).PersistBroker.CloseConnection(); ((SQLDomainDataProvider)DataProvider).PersistBroker.AutoCloseConnection = true; } } }
private void CheckImportResult(ArrayList items) { BenQGuru.eMES.MOModel.ItemFacade itemFacade = new BenQGuru.eMES.MOModel.ItemFacade(base.DataProvider); BenQGuru.eMES.BaseSetting.BaseModelFacade modelFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider); if (_facade == null) { _facade = new SMTFacade(base.DataProvider); } ArrayList checkedSpec = new ArrayList(); ArrayList checkedProduct = new ArrayList(); ArrayList checkedSSCode = new ArrayList(); for (int i = 0; i < items.Count; i++) { SMTFeederMaterial item = (SMTFeederMaterial)items[i]; item.EAttribute1 = true.ToString(); if (item.ProductCode == string.Empty || item.StepSequenceCode == string.Empty || item.MachineCode == string.Empty || item.MachineStationCode == string.Empty || item.MaterialCode == string.Empty) { item.EAttribute1 = false.ToString() + ":" + languageComponent1.GetString("$Error_Input_Empty"); continue; } if (checkedProduct.Contains(item.ProductCode) == false) { object obj = itemFacade.GetItem(item.ProductCode, GlobalVariables.CurrentOrganizations.First().OrganizationID); if (obj == null) { item.EAttribute1 = false.ToString() + ":" + languageComponent1.GetString("$Error_ItemCode_NotExist"); continue; } else { checkedProduct.Add(item.ProductCode); } } if (checkedSSCode.Contains(item.StepSequenceCode) == false) { object obj = modelFacade.GetStepSequence(item.StepSequenceCode); if (obj == null) { item.EAttribute1 = false.ToString() + ":" + languageComponent1.GetString("$Error_SSCode_NotExist"); continue; } else { checkedSSCode.Add(item.StepSequenceCode); } } if (item.FeederSpecCode == string.Empty || item.Qty == 0) { if (item.SourceMaterialCode == string.Empty || i == 0) { item.EAttribute1 = false.ToString() + ":" + languageComponent1.GetString("$MaterialCode_Not_Exist"); continue; } for (int n = 0; n < items.Count; n++) { SMTFeederMaterial item1 = (SMTFeederMaterial)items[n]; if (item1.MaterialCode == item.SourceMaterialCode) { if (item.FeederSpecCode == string.Empty) { item.FeederSpecCode = item1.FeederSpecCode; } if (item.Qty == 0) { item.Qty = item1.Qty; } break; } } if (item.FeederSpecCode == string.Empty) { item.EAttribute1 = false.ToString() + ":" + languageComponent1.GetString("$FeederSpec_Not_Exist"); continue; } } if (checkedSpec.Contains(item.FeederSpecCode) == false) { object obj = _facade.GetFeederSpec(item.FeederSpecCode); if (obj == null) { item.EAttribute1 = false.ToString() + ":" + languageComponent1.GetString("$FeederSpec_Not_Exist"); continue; } else { checkedSpec.Add(item.FeederSpecCode); } } } }
private void ucButtonOK_Click(object sender, EventArgs e) { //获取产品原始的序列号 DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider); string sourceOldRCard = dataCollectFacade.GetSourceCard(this.ucLabelEditOldRCard.Value.Trim().ToUpper(), string.Empty); string sourceNewRCard = dataCollectFacade.GetSourceCard(this.ucLabelEditNewRCard.Value.Trim().ToUpper(), string.Empty); //check OldRcard Is Empty if (string.IsNullOrEmpty(this.ucLabelEditOldRCard.Value.Trim())) { ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditOldRCard.Value + ":" + this.ucLabelEditOldRCard.Value, new UserControl.Message(MessageType.Error, "$CS_OLDRCARD_ISNULL"), true); this.ucLabelEditOldRCard.TextFocus(true, true); return; } //Check OldRcard Is Exist in ProductInfo Object ObjectSimulationOld = dataCollectFacade.GetLastSimulationReport(FormatHelper.CleanString(sourceOldRCard.Trim().ToUpper())); if (ObjectSimulationOld == null) { ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditOldRCard.Value + ":" + this.ucLabelEditOldRCard.Value, new UserControl.Message(MessageType.Error, "$CS_OLDRCARD_IS_NOT_EXIT"), true); this.ucLabelEditOldRCard.TextFocus(false, true); return; } //Check NewRcard Is Empty if (string.IsNullOrEmpty(this.ucLabelEditNewRCard.Value.Trim())) { ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditNewRCard.Value + ":" + this.ucLabelEditNewRCard.Value, new UserControl.Message(MessageType.Error, "$CS_newIDisNull"), true); this.ucLabelEditNewRCard.TextFocus(false, true); return; } //Compare NewRcard and OldRcard Is Same if (this.ucLabelEditNewRCard.Value.Trim() == this.ucLabelEditOldRCard.Value.Trim()) { ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditNewRCard.Value + ":" + this.ucLabelEditNewRCard.Value, new UserControl.Message(MessageType.Error, "$CS_SAMERCARD"), true); this.ucLabelEditNewRCard.TextFocus(false, true); return; } //Check OldRcard Is Not Exist in ProductInfo Object ObjectSimulationNew = dataCollectFacade.GetLastSimulationReport(FormatHelper.CleanString(sourceNewRCard.Trim().ToUpper())); if (ObjectSimulationNew != null) { ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditNewRCard.Value + ":" + this.ucLabelEditNewRCard.Value, new UserControl.Message(MessageType.Error, "$CS_NEWRCARD_IS_PRODUCTINFO"), true); this.ucLabelEditNewRCard.TextFocus(false, true); return; } //Check ChangeReason is Empty if (string.IsNullOrEmpty(this.ucLabelEditReason.Value.Trim())) { ApplicationRun.GetInfoForm().AddEx(this._FunctionName, this.ucLabelEditReason.Value + ":" + this.ucLabelEditReason.Value, new UserControl.Message(MessageType.Error, "$CS_INPUT_CHANGEREASON"), true); this.ucLabelEditReason.TextFocus(false, true); return; } BaseSetting.BaseModelFacade baseModelFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider); string OldRcard = FormatHelper.CleanString(this.ucLabelEditOldRCard.Value.Trim().ToUpper()); string NewRcard = FormatHelper.CleanString(this.ucLabelEditNewRCard.Value.Trim().ToUpper()); string OutPutResoult = string.Empty; ProcedureCondition procedureCondition = new ProcedureCondition("CHANGERCARD", new ProcedureParameter[] { new ProcedureParameter("i_FromRCard", typeof(string), 40, DirectionType.Input, OldRcard), new ProcedureParameter("i_ToRCard", typeof(string), 40, DirectionType.Input, NewRcard), new ProcedureParameter("o_Result", typeof(string), 40, DirectionType.Output, OutPutResoult) }); this.DataProvider.BeginTransaction(); try { baseModelFacade.DoRCardChange(ref procedureCondition); if (procedureCondition.Parameters[2].Value.ToString().Length == 2) { DBDateTime DBDateTime = FormatHelper.GetNowDBDateTime(this.DataProvider); RCardChange NewRCardChange = baseModelFacade.CreateNewRCardChange(); NewRCardChange.RCardFrom = OldRcard; NewRCardChange.RCardTo = NewRcard; NewRCardChange.Reason = FormatHelper.CleanString(this.ucLabelEditReason.Value.Trim()); NewRCardChange.MaintainUser = ApplicationService.Current().UserCode; NewRCardChange.MaintainDate = DBDateTime.DBDate; NewRCardChange.MaintainTime = DBDateTime.DBTime; NewRCardChange.EAttribute1 = string.Empty; baseModelFacade.AddRCardChange(NewRCardChange); ApplicationRun.GetInfoForm().AddEx(this._FunctionName, procedureCondition.Parameters[2].Value.ToString(), new UserControl.Message(MessageType.Success, "$CS_RCARDCHANGE_SUCCESS"), true); this.ucLabelEditNewRCard.Value = string.Empty; this.ucLabelEditReason.Value = string.Empty; } } catch (Exception ex) { this.DataProvider.RollbackTransaction(); ApplicationRun.GetInfoForm().AddEx(this._FunctionName, "", new UserControl.Message(ex), true); } finally { this.DataProvider.CommitTransaction(); } if (procedureCondition.Parameters[2].Value.ToString().Length > 2) { ApplicationRun.GetInfoForm().AddEx(this._FunctionName, procedureCondition.Parameters[2].Value.ToString(), new UserControl.Message(MessageType.Error, "$CS_RCARDCHANGE_WRONG"), true); } this.ucLabelEditOldRCard.TextFocus(false, true); }
// Added end public override Messages Action(object act) { Messages msg = new Messages(); ActionOnLineHelper _helper = null; BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider domainProvider = null; if (act == null) { return(msg); } DataCollect.Action.ActionEventArgs args; if (ObjectState == null) { args = new BenQGuru.eMES.DataCollect.Action.ActionEventArgs(); args.RunningCard = act.ToString().ToUpper().Trim(); } else { args = ObjectState as DataCollect.Action.ActionEventArgs; } string data = act.ToString().ToUpper().Trim(); //Keyparts //Laws Lu,2006/06/03 添加 获取已有连接 if ((act as IDCTClient).DBConnection != null) { domainProvider = (act as IDCTClient).DBConnection as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider; } else { domainProvider = Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider() as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider; (act as IDCTClient).DBConnection = domainProvider; } msg = CheckData(data, domainProvider); if (keypartsHT == null) { // 按照逻辑,走到这个分支应该是错误的 string strFile = @"C:\DCT_EmptyMessage.txt"; string strLine = DateTime.Now.ToString("yyyy-MM-dd HH:mi:ss") + "\t" + "ActionCollectKeyParts" + "\t" + "Missing Product In Action, RunningCard:" + args.RunningCard + ",Input:" + data; System.IO.StreamWriter writer = new System.IO.StreamWriter(strFile, true); writer.WriteLine(strLine); writer.Close(); // if (msg.IsSuccess() && (keypartsHT == null || keypartsHT.ContainsKey("ProdcutInfo") == false)) { //检查序列号 _helper = new ActionOnLineHelper(domainProvider); msg = _helper.GetIDInfo(args.RunningCard); // Added by Icyer 2006/12/14 // 检查序列号 ProductInfo product = (ProductInfo)msg.GetData().Values[0]; if (product == null || product.LastSimulation == null) { msg.ClearMessages(); msg.Add(new Message(MessageType.Error, "$NoSimulation")); } // base.Action (act); // ActionCollectKeyparts actionCollectKeyparts = this; // this.NextAction = actionCollectKeyparts; // this.Status = ActionStatus.PrepareData; // return msg; // Added end } if (msg.IsSuccess() && (keypartsHT == null || keypartsHT.ContainsKey("KeypartsInfo") == false)) { try { keypartsHT = new Hashtable(); keypartsHT.Add("ProdcutInfo", msg); ProductInfo product = (ProductInfo)msg.GetData().Values[0]; /* Removed by Icyer 2006/12/14 * 如果序列号已在本上料工序,则GetMORouteNextOperation会取下一个工序,导致找不到OPBOM * 改变推导OPBOM的逻辑 * ItemFacade itemFacade = new ItemFacade(domainProvider); * object op = itemFacade.GetMORouteNextOperation( * product.LastSimulation.MOCode, * product.LastSimulation.RouteCode, * product.LastSimulation.OPCode); * * OPBOMFacade opBOMFacade=new OPBOMFacade( domainProvider); * object[] objBomDetail = opBOMFacade.GetOPBOMDetails( * product.LastSimulation.MOCode, * product.LastSimulation.RouteCode, * (op as ItemRoute2OP).OPCode); */ // Added by Icyer 2006/12/14 IDCTClient client = act as IDCTClient; OPBOMFacade opBOMFacade = new OPBOMFacade(domainProvider); object[] objBomDetail = null; DataCollect.ActionOnLineHelper onLine = new ActionOnLineHelper(domainProvider); Messages messages1 = onLine.CheckID( new CKeypartsActionEventArgs( ActionType.DataCollectAction_CollectKeyParts, product.LastSimulation.RunningCard, client.LoginedUser, client.ResourceCode, product, null, null)); if (messages1.IsSuccess() == true) { objBomDetail = opBOMFacade.GetOPBOMDetails( product.NowSimulation.MOCode, product.NowSimulation.RouteCode, product.NowSimulation.OPCode); } else { throw new Exception(messages1.OutPut()); } // Added end MOFacade moFacade = new MOFacade(domainProvider); object mo = moFacade.GetMO(product.LastSimulation.MOCode); OPBomKeyparts opBomKeyparts = new OPBomKeyparts(objBomDetail, Convert.ToInt32(((MO)mo).IDMergeRule), domainProvider); if (opBomKeyparts.Count == 0) { /* Removed by Icyer 2006/12/27 @ YHI * msg.Add(new Message(MessageType.Error, "$CS_NOOPBomInfo $CS_Param_MOCode="+product.LastSimulation.MOCode +" $CS_Param_RouteCode="+product.LastSimulation.RouteCode +" $CS_Param_OPCode ="+product.LastSimulation.OPCode)); * throw new Exception(msg.OutPut()); */ throw new Exception("$CS_NOOPBomInfo"); } else { //opBomKeyparts.AddKeyparts(data, product.LastSimulation.MOCode); // Removed by Icyer 2006/12/14 keypartsHT.Add("KeypartsInfo", opBomKeyparts); } } catch (Exception ex) { /* Removed by Icyer 2006/12/27 @ YHI * keypartsHT = null; * this.NeedCancel = true; * throw ex; */ // Added by Icyer 2006/12/27 @ YHI base.Action(act); ActionCollectKeyparts actionCollectKeyparts = this; this.NextAction = actionCollectKeyparts; this.Status = ActionStatus.PrepareData; msg.ClearMessages(); msg.Add(new UserControl.Message(MessageType.Error, ex.Message)); msg.Add(new UserControl.Message(MessageType.Normal, "$DCT_PLEASE_INPUT_Keyparts")); return(msg); // Added end } } } if (msg.IsSuccess()) { OPBomKeyparts opBomKeyparts = (OPBomKeyparts)keypartsHT["KeypartsInfo"]; msg = keypartsHT["ProdcutInfo"] as Messages; MO moWillGo = (MO)keypartsHT["MOWillGo"]; ProductInfo product = (ProductInfo)msg.GetData().Values[0]; Messages msgResult = new Messages(); if (opBomKeyparts.Count > opBomKeyparts.GetbomKeypartCount()) { try { //opBomKeyparts.AddKeyparts(data, product.LastSimulation.MOCode); if (moWillGo == null) { msgResult.AddMessages(opBomKeyparts.AddKeyparts(data, product.LastSimulation.MOCode)); } else { msgResult.AddMessages(opBomKeyparts.AddKeyparts(data, moWillGo.MOCode)); } } catch (Exception ex) { msgResult.Add(new UserControl.Message(MessageType.Error, ex.Message)); } keypartsHT["KeypartsInfo"] = opBomKeyparts; } if (msgResult.IsSuccess() == false || opBomKeyparts.Count > opBomKeyparts.GetbomKeypartCount()) { base.Action(act); ActionCollectKeyparts actionCollectKeyparts = this; this.NextAction = actionCollectKeyparts; this.Status = ActionStatus.PrepareData; this.OutMesssage = new UserControl.Message(MessageType.Normal, "$DCT_PLEASE_INPUT_Keyparts " + (opBomKeyparts.GetbomKeypartCount() + 1).ToString() + "/" + opBomKeyparts.Count.ToString()); if (msgResult.IsSuccess() == false) { //msgResult.Add(new UserControl.Message(MessageType.Normal, "$DCT_PLEASE_INPUT_Keyparts")); return(msgResult); } else { return(msg); } } //((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)domainProvider).PersistBroker.OpenConnection(); domainProvider.BeginTransaction(); try { BenQGuru.eMES.BaseSetting.BaseModelFacade dataModel = new BenQGuru.eMES.BaseSetting.BaseModelFacade(domainProvider); Resource resource = (Resource)dataModel.GetResource(args.ResourceCode); _helper = new ActionOnLineHelper(domainProvider); DataCollectFacade dataCollect = new DataCollect.DataCollectFacade(domainProvider); ActionCheckStatus actionCheckStatus = new ActionCheckStatus(); actionCheckStatus.ProductInfo = product; actionCheckStatus.ProductInfo.Resource = resource; ExtendSimulation lastSimulation = actionCheckStatus.ProductInfo.LastSimulation; BenQGuru.eMES.Material.WarehouseFacade wfacade = null; if (System.Configuration.ConfigurationSettings.AppSettings["NeedMaterialModule"].Trim() == "1") { wfacade = new WarehouseFacade(domainProvider); } IDCTClient client = act as IDCTClient; msg.AddMessages(_helper.ActionWithTransaction( new CKeypartsActionEventArgs( ActionType.DataCollectAction_CollectKeyParts, product.NowSimulation.RunningCard, client.LoginedUser, client.ResourceCode, product, opBomKeyparts, wfacade), actionCheckStatus)); // Added by Icyer 2006/12/28 @ YHI 采集集成上料 bool bLoadedINNO = false; if (this.NeedCollectINNO == true && msg.IsSuccess() == true) { string strRCard = product.NowSimulation.RunningCard; UserControl.Messages msgProduct = _helper.GetIDInfo(strRCard); product = (ProductInfo)msgProduct.GetData().Values[0]; CINNOActionEventArgs argsInno = new CINNOActionEventArgs( ActionType.DataCollectAction_CollectINNO, strRCard, client.LoginedUser, client.ResourceCode, product, INNOCode, wfacade ); IAction action = new BenQGuru.eMES.DataCollect.Action.ActionFactory(domainProvider).CreateAction(ActionType.DataCollectAction_CollectINNO); msg.AddMessages(action.Execute(argsInno)); if (msg.IsSuccess() == true) { bLoadedINNO = true; msg.Add(new UserControl.Message(MessageType.Success, string.Format("$CS_INNO_CollectSuccess[" + this.INNOCode + "] $CS_Keyparts_CollectSuccess"))); } } // Added end if (msg.IsSuccess()) { if (System.Configuration.ConfigurationSettings.AppSettings["NeedMaterialModule"].Trim() == "1") { if (wfacade != null) { wfacade.ExecCacheSQL(); } } domainProvider.CommitTransaction(); if (bLoadedINNO == false) { msg.Add(new UserControl.Message(MessageType.Success, string.Format("$CS_Keyparts_CollectSuccess"))); } } else { domainProvider.RollbackTransaction(); } } catch (Exception ex) { domainProvider.RollbackTransaction(); msg.Add(new UserControl.Message(ex)); } finally { ((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)domainProvider).PersistBroker.CloseConnection(); } base.Action(act); ActionRCard actRcard1 = new ActionRCard(); actRcard1.OutMesssage = new UserControl.Message(MessageType.Normal, "$CS_Please_Input_RunningCard"); this.NextAction = actRcard1; this.ObjectState = null; this.keypartsHT = null; this.Status = ActionStatus.PrepareData; return(msg); } base.Action(act); //Web.Helper.ActionType acttype = new Web.Helper.ActionType(); // if(acttype.Items.Contains(args.RunningCard)) // { // (act as IDCTClient).CachedAction = null; // } ActionRCard actRcard = new ActionRCard(); actRcard.OutMesssage = new UserControl.Message(MessageType.Normal, "$CS_Please_Input_RunningCard"); this.NextAction = actRcard; // Added by Icyer 2006/12/14 this.ObjectState = null; this.keypartsHT = null; this.Status = ActionStatus.PrepareData; // Added end return(msg); }
public Messages CheckProduct(string rcard, object act) { currentProductInfo = null; moWillGo = null; Messages msg = new Messages(); BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider domainProvider = null; if ((act as IDCTClient).DBConnection != null) { domainProvider = (act as IDCTClient).DBConnection as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider; } else { domainProvider = Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider() as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider; (act as IDCTClient).DBConnection = domainProvider; } ActionOnLineHelper _helper = new ActionOnLineHelper(domainProvider); msg = _helper.GetIDInfo(rcard); if (msg.IsSuccess()) { IDCTClient client = (IDCTClient)act; ProductInfo product = (ProductInfo)msg.GetData().Values[0]; bool bNeedCheckMO = false; if (product == null || product.LastSimulation == null) { /* 需要再检查是否归属工单 * msg.Add(new UserControl.Message(UserControl.MessageType.Error,"$NoSimulation")); * return msg; */ bNeedCheckMO = true; } else { // 如果完工,并且当前资源不属于Simulation的当前工序,则需要检查归属工单 if (product.LastSimulation.IsComplete == "1") { BenQGuru.eMES.BaseSetting.BaseModelFacade dataModel = new BenQGuru.eMES.BaseSetting.BaseModelFacade(domainProvider); if (dataModel.GetOperation2Resource(product.LastSimulation.OPCode, client.ResourceCode) == null) { bNeedCheckMO = true; } } } Messages msgChkErr = new Messages(); if (bNeedCheckMO == true) { ActionGoToMO actionGoMO = new ActionGoToMO(domainProvider); Messages msgMo = actionGoMO.GetItemCodeFromGoMoRCard(client.ResourceCode, rcard); if (msgMo.IsSuccess() == false) // 如果有错误,表示需要归属工单,但是解析工单或查询工单发生错误 { msgChkErr.AddMessages(msgMo); } else // 返回成功,有两种情况:需要归属工单并且返回正确的工单信息;不需要归属工单 { UserControl.Message msgMoData = msgMo.GetData(); if (msgMoData != null && msgMoData.Values.Length > 0) // 有DATA数据,表示需要归属工单 { this.moWillGo = (MO)msgMoData.Values[0]; } else // 如果没有DATA数据,表示不需要归属工单,则调用以前的代码:如果LastSimulation为空,则报没有序列号 { if (product.LastSimulation == null) { msgChkErr.Add(new UserControl.Message(UserControl.MessageType.Error, "$NoSimulation")); } } } } if (msgChkErr.IsSuccess() == false) { return(msgChkErr); } if (product.LastSimulation != null) // 只有在序列号存在的情况下才检查途程 { msg = _helper.CheckID(new TSActionEventArgs(ActionType.DataCollectAction_NG, rcard, client.LoginedUser, client.ResourceCode, product, new object[] {}, null, "")); } if (product.LastSimulation == null || msg.IsSuccess() == true) { currentProductInfo = product; } else if (product.LastSimulation.LastAction == ActionType.DataCollectAction_GOOD || product.LastSimulation.LastAction == ActionType.DataCollectAction_NG || product.LastSimulation.LastAction == ActionType.DataCollectAction_OutLineGood || product.LastSimulation.LastAction == ActionType.DataCollectAction_OutLineNG) // 允许测试站重复采集 { BenQGuru.eMES.BaseSetting.BaseModelFacade dataModel = new BenQGuru.eMES.BaseSetting.BaseModelFacade(domainProvider); if (dataModel.GetOperation2Resource(product.LastSimulation.OPCode, (act as IDCTClient).ResourceCode) != null) { msg.ClearMessages(); currentProductInfo = product; } } } return(msg); }
private DataTable GetImportDT(ArrayList array) { /* 生成表结构 */ DataTable dt = new DataTable(); dt.Rows.Clear(); dt.Columns.Clear(); dt.Columns.Add(this.gridHelper.CheckColumnKey, typeof(bool)); dt.Columns.Add("GUID"); dt.Columns.Add("ImportResult"); dt.AcceptChanges(); ArrayList htable = this.XmlHelper.GridBuilder; string orgid = string.Empty; if (htable.Count > 0) { foreach (DictionaryEntry de in htable) { string key = de.Key.ToString(); dt.Columns.Add(key); } //添加组织ID Add By Jarvis 20121213 switch (this.InputType.ToUpper()) { case "ITEM": case "MODEL": case "ITEMLOCATION": case "OPBOM": htable.Insert(0, new DictionaryEntry("ORGID", "ORGID")); dt.Columns.Add("ORGID"); Domain.BaseSetting.Organization org = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider). GetUserDefaultOrgByUser(this.GetUserCode()) as Domain.BaseSetting.Organization; if (org != null) { orgid = org.OrganizationID.ToString().ToUpper(); } break; default: break; } } /* 填数据 */ for (int i = 0; i < array.Count; i++) { GridRecord gridRow = array[i] as GridRecord; DataRow row = dt.NewRow(); row["GUID"] = Guid.NewGuid().ToString(); row["ImportResult"] = ""; row[gridHelper.CheckColumnKey] = false; if (htable.Count > 0) { foreach (DictionaryEntry de in htable) { string key = de.Key.ToString(); //添加组织ID Add By Jarvis 20121213 if (key.ToUpper() == "ORGID") { row[key] = orgid; continue; } if (XmlHelper.NeedMatchCtoE(key)) { string value1 = GetECode(key, gridRow.Items.FindItemByKey(key).Value.ToString()); if (gridRow.Items.FindItemByKey(key).Value.ToString().Trim().Length != 0 && value1.Length == 0) { ExceptionManager.Raise(this.GetType().BaseType, "$Error_UploadFile_ContentError"); } else { row[key] = value1; } } else { row[key] = gridRow.Items.FindItemByKey(key).Value.ToString(); } } } dt.Rows.Add(row); } return(dt); }
private void ucBtnOK_Click(object sender, System.EventArgs e) { if (this.ucLEMOCode.Value.Trim() == string.Empty) { this.ucMessage.Add(">>$CS_Please_Input_MOCode"); ucLEMOCode.TextFocus(false, true); return; } if (this.ucLERunningCard.Value.Trim() == string.Empty) { this.ucMessage.Add(">>$CS_Please_Input_RunningCard"); return; } if (this._moCode == string.Empty) { if (!this.displayMOInfo()) { return; } } string runningCard = this.ucLERunningCard.Value.Trim().ToUpper(); this.ucMessage.Add("<< " + runningCard); Messages messages = this._helper.GetIDInfo(runningCard); if (messages.IsSuccess()) { ProductInfo product = (ProductInfo)messages.GetData().Values[0]; // Added by Icyer 2005/10/28 if (Resource == null) { BenQGuru.eMES.BaseSetting.BaseModelFacade dataModel = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider); Resource = (Domain.BaseSetting.Resource)dataModel.GetResource(ApplicationService.Current().ResourceCode); } // Added end ActionCheckStatus actionCheckStatus = new ActionCheckStatus(); if (listActionCheckStatus.ContainsKey(_moCode)) { actionCheckStatus = (ActionCheckStatus)listActionCheckStatus[_moCode]; actionCheckStatus.ProductInfo = null; actionCheckStatus.ActionList = new ArrayList(); } else { listActionCheckStatus.Add(_moCode, actionCheckStatus); } GoToMOActionEventArgs args = new GoToMOActionEventArgs( ActionType.DataCollectAction_GoMO, runningCard, ApplicationService.Current().UserCode, ApplicationService.Current().ResourceCode, product, this._moCode); IAction action = new ActionFactory(this.DataProvider).CreateAction(ActionType.DataCollectAction_GoMO); //Laws Lu,2005/10/19,新增 缓解性能问题 ((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)DataProvider).PersistBroker.OpenConnection(); DataProvider.BeginTransaction(); try { messages.AddMessages(((IActionWithStatus)action).Execute(args, actionCheckStatus)); if (messages.IsSuccess()) { this.DataProvider.CommitTransaction(); messages.Add(new UserControl.Message(MessageType.Success, string.Format("$CS_GOMO_CollectSuccess $MOCode={0}", this._moCode))); actionCheckStatus.MO.MOInputQty += actionCheckStatus.MO.IDMergeRule; this.displayMOInfo(); } else { this.DataProvider.RollbackTransaction(); } } catch (Exception ex) { this.DataProvider.RollbackTransaction(); messages.Add(new UserControl.Message(ex)); } finally { //Laws Lu,2005/10/19,新增 缓解性能问题 ((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)DataProvider).PersistBroker.CloseConnection(); } } this.ucMessage.Add(messages); this.ucMessage.Add(">>$CS_Please_Input_RunningCard"); this.ucLERunningCard.Value = ""; this.ucLERunningCard.TextFocus(false, true); }
private void btnConfirm_Click(object sender, System.EventArgs e) { try { this.Cursor = System.Windows.Forms.Cursors.WaitCursor; Messages msg = new Messages(); if (this.txtAlertMsg.InnerTextBox.Text.Trim() == string.Empty) { msg.Add(new UserControl.Message(MessageType.Error, this.txtAlertMsg.Caption + " $Error_Input_Empty")); ApplicationRun.GetInfoForm().Add(msg); return; } if (this.txtMOCode.InnerTextBox.Text.Trim() == string.Empty) { msg.Add(new UserControl.Message(MessageType.Error, this.txtMOCode.Caption + " $Error_Input_Empty")); ApplicationRun.GetInfoForm().Add(msg); this.txtMOCode.TextFocus(false, true); return; } //根据工单得到产品代码 BenQGuru.eMES.MOModel.MOFacade moFacade = new MOFacade(this.DataProvider); BenQGuru.eMES.Domain.MOModel.MO mo = moFacade.GetMO(this.txtMOCode.InnerTextBox.Text.Trim()) as BenQGuru.eMES.Domain.MOModel.MO; string productcode; if (mo != null) { productcode = mo.ItemCode; } else { msg.Add(new UserControl.Message(MessageType.Error, "$ManualAlert_MOCode_Error")); //工单号码输入错误 ApplicationRun.GetInfoForm().Add(msg); this.txtMOCode.TextFocus(false, true); return; } try { DataProvider.BeginTransaction(); BenQGuru.eMES.AlertModel.AlertFacade facade = new BenQGuru.eMES.AlertModel.AlertFacade(DataProvider); BenQGuru.eMES.Domain.Alert.Alert alert = facade.CreateNewAlert(); alert.ItemCode = string.Empty; alert.AlertItem = string.Empty; alert.AlertStatus = BenQGuru.eMES.AlertModel.AlertStatus_Old.Unhandled; alert.AlertType = BenQGuru.eMES.AlertModel.AlertType_Old.Manual; //Laws Lu,2006/11/13 uniform system collect date DBDateTime dbDateTime; dbDateTime = FormatHelper.GetNowDBDateTime(DataProvider); alert.MaintainDate = dbDateTime.DBDate; alert.MaintainUser = ApplicationService.Current().UserCode; alert.MaintainTime = dbDateTime.DBTime; alert.AlertLevel = this._levelDict[this.cbAlertLevel.ComboBoxData.SelectedItem.ToString()]; alert.AlertMsg = ApplicationService.Current().ResourceCode + ":" + this.txtAlertMsg.InnerTextBox.Text; alert.Description = string.Empty; alert.MailNotify = "N"; alert.AlertValue = 0; alert.ProductCode = productcode; //单得到产线代码 BenQGuru.eMES.BaseSetting.BaseModelFacade baseFacade = new BenQGuru.eMES.BaseSetting.BaseModelFacade(this.DataProvider); Resource res = baseFacade.GetResource(ApplicationService.Current().ResourceCode) as Resource; if (res != null) { alert.SSCode = res.StepSequenceCode; } alert.AlertMsg = this.txtAlertMsg.InnerTextBox.Text + "," + "产品: " + alert.ProductCode + ", 资源: " + ApplicationService.Current().ResourceCode; facade.AddAlert(alert); DataProvider.CommitTransaction(); msg.Add(new UserControl.Message(MessageType.Success, "$ManualAlert_Add_Success")); ApplicationRun.GetInfoForm().Add(msg); this.txtAlertMsg.InnerTextBox.Text = string.Empty; //刷新Sample //RefreshSample(); } catch (System.Exception ex) { DataProvider.RollbackTransaction(); msg.Add(new UserControl.Message(MessageType.Error, ex.Message)); ApplicationRun.GetInfoForm().Add(msg); } } finally { this.Cursor = System.Windows.Forms.Cursors.Default; this.CloseConnection(); } }